Embed Size (px)
Citation preview
WorléeCure - Polymer Hardeners for Floors and Coatings
Contact:
Application technologyNicole AhlgrimmPhone: +49 (0)40 73333 2505E-mail: [email protected]
Worlée-Chemie GmbHGrusonstraße 26D-22113 HamburgGermany
Resin factory/SalesWorléestraße 1D-21481 Lauenburg/ElbePhone: +49 (0)4153 5960Fax: +49 (0)4153 536 [email protected]
Any deliveries and/or services are exclusively subject to our general standard terms and conditions in their respectively valid version. We will be happy to provide you with the general standard terms and conditions upon your request and they can be downloaded online at http://www.worlee.de/GSTC.
© ro
bert
katz
ki/u
nspl
ash.
com
Product
Prim
ers
Prim
ers
for s
ubst
rate
s (O
smos
is)
Mor
tals
Rolle
r coa
tings
Self-
leve
lling
coa
tings
Seal
ants
Fille
rs
Coat
ings
in c
onta
ct w
ith
pota
ble
wat
er
Chem
ical
-res
ista
ntco
atin
gs
UV-
resi
stan
t coa
tings
Was
habl
e jo
int s
eale
rs
WorléCureVP 2235
– – – –
WorléCureVP 2246
– – – –
WorléCureVP 2270
– – –
WorléCureVP 2000
– – –
WorléCureVP 2001
– – –
WorléCureVP 2286
–
WorléCureVP 3000
– – – – – – –
WorléeCure – Application matrix
highly suitable suitable – not recommended
WorléeCure VP 2286 is a water-based polymer hardener* with excellent hardening properties. This product demonstrates good UV stability and good hardening characteristics for high coating thicknesses.When used with fluid epoxy resins, this hardener is notable for yielding particularly good surfaces.
WorléeCure VP 3000 is awater-basedmodifiedpolyaminoamideadduct. This product can be used for water-based paints and roller coatings.Insystems,ityieldsexcellentadherencetometal,mineraland vitreous substrates.
ProductAmine value
mg KOH/g
H- Equivalent
g/Val.
ViskositymPas (25°C)
Gel timeDIN 16945
GardnerColourIndex
Delivery form
WorléeCure VP 2286 250 – 350 115 < 10000 approx. 24 min. < 275 %
in water
WorléeCure VP 3000 120 – 170 210 30 K – 50 K – < 1250 %
in water
WorléeCure polymer hardeners*
The REACH Regulation (VO (EG) No. 1907/2006) differentiates betweensubstances thatmustberegisteredandpolymers,whichare excepted from registration according to Article 2.9. The polymer hardeners* in our WorléeCure product line are based on polymer polyamine adducts that are not subject to registration under REACH.
WorléeCure for innovative solutionsThe objective of the epoxy resin hardeners from the WorléeCure familyistoofferthehighperformanceprofileofstandardproductsthathavebeenusedtodateforapplicationsforfloorsandcoatings.
WorléeCure VP 2235 is a cycloaliphatic polymer hardener* with mediumviscosityandserfficientworkingtime.Thisproductdemon-strates good hardening properties, chemical resistance and goodsurface qualities. This hardener is suitable for the production of primers,rollercoatingsandself-levellingtopcoatings.
WorléeCure VP 2246 is a cycloaliphatic polymer hardener* with low viscosity and serfficient working time. This product demonstratesgood hardening properties, chemical resistance and good surfacequalities.Successfulformulationsofprimers,mortars,rollercoatingsand self-levelling top coatings may be made with this product.
WorléeCure VP 2270 is a cycloaliphatic polymer hardener* with ashorterworkingtime.Thisproductdemonstraterapidhardening,chemical resistance and good surface qualities. This hardener is suitable for the production of primers and self-levelling top coatings and can be used for coatings that come into contact with food materials and potable water.
* Contains polymer content and registered monomers according to REACH
WorléeCure VP 2000isamodifiedcycloaliphaticpolymerhardener*with a low yellowing tendency. This hardener can be used for coa-tings systems that are intended to yield visually attractive surfaces.
WorléeCure VP 2001isamodifiedcycloaliphaticpolymerhardener*with good colour stability. The application area of this hardener includes roller coatings, self-levelling top coatings and mortar systems.
WorléeCure – water-basedpolymer hardeners*
ProductAmine value
mg KOH/g
H- Equivalent
g/Val.
ViskositymPas (25°C)
Gel timeDIN 16945
GardnerColourIndex
Densityg/cm³
WorléeCure VP 2235 250 – 350 115 460 – 660 approx. 36 min. < 2 1.02 ± 0.02
WorléeCure VP 2246 275 – 375 93 120 – 220 approx. 39 min. < 2 1.02 ± 0.02
WorléeCure VP 2270 250 – 350 100 530 – 630 approx. 18 min. < 2 1.02 ± 0.02
WorléeCure – more highly UV-resistant polymer hardeners*
ProductAmine value
mg KOH/g
H- Equivalent
g/Val.
ViskositymPas (25°C)
Gel timeDIN 16945
GardnerColourIndex
Densityg/cm³
WorléeCure VP 2000 290 – 390 89 590 – 790 approx. 40 min. < 2 1.02 ± 0.02
WorléeCure VP 2001 300 – 400 85 480 – 680 approx. 50 min. < 2 1.02 ± 0.02
Comparison of UV-stable epoxy hardeners
Q-SUN XE-1 XENON TEST CHAMBER (100 hours 340 nm)
WorléeCure VP 2000 Comparison hardener WorléeCure VP 2000
WorléeCure VP 2001 Comparison hardener WorléeCure VP 2001
5
4
3
2
1
0
delta YI
© m
atth
ew25
/shu
tters
tock
.com
WorléeCure VP 2286 is a water-based polymer hardener* with excellent hardening properties. This product demonstrates good UV stability and good hardening characteristics for high coating thicknesses.When used with fluid epoxy resins, this hardener is notable for yielding particularly good surfaces.
WorléeCure VP 3000 is awater-basedmodifiedpolyaminoamideadduct. This product can be used for water-based paints and roller coatings.Insystems,ityieldsexcellentadherencetometal,mineraland vitreous substrates.
ProductAmine value
mg KOH/g
H- Equivalent
g/Val.
ViskositymPas (25°C)
Gel timeDIN 16945
GardnerColourIndex
Delivery form
WorléeCure VP 2286 250 – 350 115 < 10000 approx. 24 min. < 275 %
in water
WorléeCure VP 3000 120 – 170 210 30 K – 50 K – < 1250 %
in water
WorléeCure polymer hardeners*
The REACH Regulation (VO (EG) No. 1907/2006) differentiates betweensubstances thatmustberegisteredandpolymers,whichare excepted from registration according to Article 2.9. The polymer hardeners* in our WorléeCure product line are based on polymer polyamine adducts that are not subject to registration under REACH.
WorléeCure for innovative solutionsThe objective of the epoxy resin hardeners from the WorléeCure familyistoofferthehighperformanceprofileofstandardproductsthathavebeenusedtodateforapplicationsforfloorsandcoatings.
WorléeCure VP 2235 is a cycloaliphatic polymer hardener* with mediumviscosityandserfficientworkingtime.Thisproductdemon-strates good hardening properties, chemical resistance and goodsurface qualities. This hardener is suitable for the production of primers,rollercoatingsandself-levellingtopcoatings.
WorléeCure VP 2246 is a cycloaliphatic polymer hardener* with low viscosity and serfficient working time. This product demonstratesgood hardening properties, chemical resistance and good surfacequalities.Successfulformulationsofprimers,mortars,rollercoatingsand self-levelling top coatings may be made with this product.
WorléeCure VP 2270 is a cycloaliphatic polymer hardener* with ashorterworkingtime.Thisproductdemonstraterapidhardening,chemical resistance and good surface qualities. This hardener is suitable for the production of primers and self-levelling top coatings and can be used for coatings that come into contact with food materials and potable water.
* Contains polymer content and registered monomers according to REACH
WorléeCure VP 2000isamodifiedcycloaliphaticpolymerhardener*with a low yellowing tendency. This hardener can be used for coa-tings systems that are intended to yield visually attractive surfaces.
WorléeCure VP 2001isamodifiedcycloaliphaticpolymerhardener*with good colour stability. The application area of this hardener includes roller coatings, self-levelling top coatings and mortar systems.
WorléeCure – water-basedpolymer hardeners*
ProductAmine value
mg KOH/g
H- Equivalent
g/Val.
ViskositymPas (25°C)
Gel timeDIN 16945
GardnerColourIndex
Densityg/cm³
WorléeCure VP 2235 250 – 350 115 460 – 660 approx. 36 min. < 2 1.02 ± 0.02
WorléeCure VP 2246 275 – 375 93 120 – 220 approx. 39 min. < 2 1.02 ± 0.02
WorléeCure VP 2270 250 – 350 100 530 – 630 approx. 18 min. < 2 1.02 ± 0.02
WorléeCure – more highly UV-resistant polymer hardeners*
ProductAmine value
mg KOH/g
H- Equivalent
g/Val.
ViskositymPas (25°C)
Gel timeDIN 16945
GardnerColourIndex
Densityg/cm³
WorléeCure VP 2000 290 – 390 89 590 – 790 approx. 40 min. < 2 1.02 ± 0.02
WorléeCure VP 2001 300 – 400 85 480 – 680 approx. 50 min. < 2 1.02 ± 0.02
Comparison of UV-stable epoxy hardeners
Q-SUN XE-1 XENON TEST CHAMBER (100 hours 340 nm)
WorléeCure VP 2000 Comparison hardener WorléeCure VP 2000
WorléeCure VP 2001 Comparison hardener WorléeCure VP 2001
5
4
3
2
1
0
delta YI
© m
atth
ew25
/shu
tters
tock
.com
WorléeCure VP 2286 is a water-based polymer hardener* with excellent hardening properties. This product demonstrates good UV stability and good hardening characteristics for high coating thicknesses.When used with fluid epoxy resins, this hardener is notable for yielding particularly good surfaces.
WorléeCure VP 3000 is awater-basedmodifiedpolyaminoamideadduct. This product can be used for water-based paints and roller coatings.Insystems,ityieldsexcellentadherencetometal,mineraland vitreous substrates.
ProductAmine value
mg KOH/g
H- Equivalent
g/Val.
ViskositymPas (25°C)
Gel timeDIN 16945
GardnerColourIndex
Delivery form
WorléeCure VP 2286 250 – 350 115 < 10000 approx. 24 min. < 275 %
in water
WorléeCure VP 3000 120 – 170 210 30 K – 50 K – < 1250 %
in water
WorléeCure polymer hardeners*
The REACH Regulation (VO (EG) No. 1907/2006) differentiates betweensubstances thatmustberegisteredandpolymers,whichare excepted from registration according to Article 2.9. The polymer hardeners* in our WorléeCure product line are based on polymer polyamine adducts that are not subject to registration under REACH.
WorléeCure for innovative solutionsThe objective of the epoxy resin hardeners from the WorléeCure familyistoofferthehighperformanceprofileofstandardproductsthathavebeenusedtodateforapplicationsforfloorsandcoatings.
WorléeCure VP 2235 is a cycloaliphatic polymer hardener* with mediumviscosityandserfficientworkingtime.Thisproductdemon-strates good hardening properties, chemical resistance and goodsurface qualities. This hardener is suitable for the production of primers,rollercoatingsandself-levellingtopcoatings.
WorléeCure VP 2246 is a cycloaliphatic polymer hardener* with low viscosity and serfficient working time. This product demonstratesgood hardening properties, chemical resistance and good surfacequalities.Successfulformulationsofprimers,mortars,rollercoatingsand self-levelling top coatings may be made with this product.
WorléeCure VP 2270 is a cycloaliphatic polymer hardener* with ashorterworkingtime.Thisproductdemonstraterapidhardening,chemical resistance and good surface qualities. This hardener is suitable for the production of primers and self-levelling top coatings and can be used for coatings that come into contact with food materials and potable water.
* Contains polymer content and registered monomers according to REACH
WorléeCure VP 2000isamodifiedcycloaliphaticpolymerhardener*with a low yellowing tendency. This hardener can be used for coa-tings systems that are intended to yield visually attractive surfaces.
WorléeCure VP 2001isamodifiedcycloaliphaticpolymerhardener*with good colour stability. The application area of this hardener includes roller coatings, self-levelling top coatings and mortar systems.
WorléeCure – water-basedpolymer hardeners*
ProductAmine value
mg KOH/g
H- Equivalent
g/Val.
ViskositymPas (25°C)
Gel timeDIN 16945
GardnerColourIndex
Densityg/cm³
WorléeCure VP 2235 250 – 350 115 460 – 660 approx. 36 min. < 2 1.02 ± 0.02
WorléeCure VP 2246 275 – 375 93 120 – 220 approx. 39 min. < 2 1.02 ± 0.02
WorléeCure VP 2270 250 – 350 100 530 – 630 approx. 18 min. < 2 1.02 ± 0.02
WorléeCure – more highly UV-resistant polymer hardeners*
ProductAmine value
mg KOH/g
H- Equivalent
g/Val.
ViskositymPas (25°C)
Gel timeDIN 16945
GardnerColourIndex
Densityg/cm³
WorléeCure VP 2000 290 – 390 89 590 – 790 approx. 40 min. < 2 1.02 ± 0.02
WorléeCure VP 2001 300 – 400 85 480 – 680 approx. 50 min. < 2 1.02 ± 0.02
Comparison of UV-stable epoxy hardeners
Q-SUN XE-1 XENON TEST CHAMBER (100 hours 340 nm)
WorléeCure VP 2000 Comparison hardener WorléeCure VP 2000
WorléeCure VP 2001 Comparison hardener WorléeCure VP 2001
5
4
3
2
1
0
delta YI
© m
atth
ew25
/shu
tters
tock
.com
WorléeCure - Polymer Hardeners for Floors and Coatings
Contact:
Application technologyNicole AhlgrimmPhone: +49 (0)40 73333 2505E-mail: [email protected]
Worlée-Chemie GmbHGrusonstraße 26D-22113 HamburgGermany
Resin factory/SalesWorléestraße 1D-21481 Lauenburg/ElbePhone: +49 (0)4153 5960Fax: +49 (0)4153 536 [email protected]
Any deliveries and/or services are exclusively subject to our general standard terms and conditions in their respectively valid version. We will be happy to provide you with the general standard terms and conditions upon your request and they can be downloaded online at http://www.worlee.de/GSTC.
© ro
bert
katz
ki/u
nspl
ash.
com
Product
Prim
ers
Prim
ers
for s
ubst
rate
s (O
smos
is)
Mor
tals
Rolle
r coa
tings
Self-
leve
lling
coa
tings
Seal
ants
Fille
rs
Coat
ings
in c
onta
ct w
ith
pota
ble
wat
er
Chem
ical
-res
ista
ntco
atin
gs
UV-
resi
stan
t coa
tings
Was
habl
e jo
int s
eale
rs
WorléCureVP 2235
– – – –
WorléCureVP 2246
– – – –
WorléCureVP 2270
– – –
WorléCureVP 2000
– – –
WorléCureVP 2001
– – –
WorléCureVP 2286
–
WorléCureVP 3000
– – – – – – –
WorléeCure – Application matrix
highly suitable suitable – not recommended
WorléeCure - Polymer Hardeners for Floors and Coatings
Contact:
Application technologyNicole AhlgrimmPhone: +49 (0)40 73333 2505E-mail: [email protected]
Worlée-Chemie GmbHGrusonstraße 26D-22113 HamburgGermany
Resin factory/SalesWorléestraße 1D-21481 Lauenburg/ElbePhone: +49 (0)4153 5960Fax: +49 (0)4153 536 [email protected]
Any deliveries and/or services are exclusively subject to our general standard terms and conditions in their respectively valid version. We will be happy to provide you with the general standard terms and conditions upon your request and they can be downloaded online at http://www.worlee.de/GSTC.
© ro
bert
katz
ki/u
nspl
ash.
com
Product
Prim
ers
Prim
ers
for s
ubst
rate
s (O
smos
is)
Mor
tals
Rolle
r coa
tings
Self-
leve
lling
coa
tings
Seal
ants
Fille
rs
Coat
ings
in c
onta
ct w
ith
pota
ble
wat
er
Chem
ical
-res
ista
ntco
atin
gs
UV-
resi
stan
t coa
tings
Was
habl
e jo
int s
eale
rs
WorléCureVP 2235
– – – –
WorléCureVP 2246
– – – –
WorléCureVP 2270
– – –
WorléCureVP 2000
– – –
WorléCureVP 2001
– – –
WorléCureVP 2286
–
WorléCureVP 3000
– – – – – – –
WorléeCure – Application matrix
highly suitable suitable – not recommended
