World_06_Lighting

1

2

7

3

4

5

6

8

46

6 LIGHTING m o t ra x . c o. u k

Typical headset configuration

LED ‘D’ LightsRemoving the original indicators from a bike often leaves large awkwardly shaped holes in the fairing. These LED D lights have been designed to fit neatly into this opening giving you flush mounted LED indicators with a professional fitment and finish. Simple to fit, with excellent results.Dimensions: Honda: 50mm L, 29mm W, 20mm H Kawasaki: 50mm L, 35mm W, 20mm H Suzuki: 48mm L, 32mm W, 19mm H Yamaha: 40mm L, 25mm W, 20mm H

H

W

L

CODE DESCRIPTIONLFH1 LED ‘D’ Lights - HondaLFK1 LED ‘D’ Lights - KawasakiLFY1 LED ‘D’ Lights - YamahaLFS1 LED ‘D’ Lights - Suzuki

LEDFire indicatorsUsing ultra-bright LED technology, these Universal LEDFire indicators offer style, improved indicator performance and all direction flash. Wrapped in a quality aluminium and Perspex housing, available with a clear, black or chrome anodised housing for improved protection from the elements. Each indicator comes complete with universal wiring.Dimensions:60mm L, 20mm W, 40mm H, 23mm Stalk, 8mm bolt fixing

L

W

Stem

H

CODE DESCRIPTIONLF1 LEDFire - Clear (Pair)LF2 LEDFire - Black (Pair)LF3 LEDFire - Chrome (Pair)

LEDTip indicatorsThese universal indicators offer improved styling and performance over original fitted equipment. Packed with high intensity LED’s the LEDTips flash in 2 directions so that you can now be seen from the front/ behind and also from the side. Available in black or carbon fibre effect.Improve your safety and style in one go! Dimensions:50mm L, 30mm W, 27mm H, 40mm/20mm Stalk, 10mm bolt fixing

L

H

W

Stem

CODE DESCRIPTIONLAT1 LEDTip - Short stem, BlackLAT2 LEDTip - Long stem, BlackLAT3 LEDTip - Short stem, CarbonLAT4 LEDTip - Long stem, Carbon

LEDArrow indicatorsDitch the bog-standards and make your bike a sharp statement of the ultimate in sophistication with LED Arrows. Don’t be a target, point out your space on the road – no-one is going to miss you fly past with these!Available in black, chrome and carbon fibre effect.Dimensions:50mm L, 30mm W, 35mm H, 40mm/20mm Stalk, 10mm bolt fixing

CODE DESCRIPTIONLA1 LEDArrow - Short stem, BlackLA2 LEDArrow - Long stem, BlackLA3 LEDArrow - Short stem, CarbonLA4 LEDArrow - Long stem, CarbonLA5 LEDArrow - Short stem, Chrome

T E C H

T E C H

T E C H

T E C HFLASHINGTOO FAST?

See page 50

L

H

W

Stem

FLASHING

TOO FAST?

See page 50

FLASHING

TOO FAST?

See page 50

FLASHINGTOO FAST?

See page 50

1

2

7

3

4

5

6

8

47

LIGHTING 6m o t ra x . c o. u k

T E C H

LEDTinyCators indicatorsTaking our Tinycators to another level, these LEDTinycators give you the perfect form of miniature aluminium indicators, with the latest LED technology for unrivalled, ultra-bright performance. Fully ‘E’ marked they give you uncompromising style and function.Available in clear, black and chrome.Dimensions: 50mm L, 22mm W, 21mm H, 17mm Stalk, 8mm bolt fixing

L

H

W

Stem

LEDAllyCators indicatorsLEDAllyCators give you the perfect form of miniature aluminium indicators, with the latest LED technology for unrivalled, ultra-bright performance. Fully ‘E’ marked they give you uncompromising style and function.Dimensions:50mm L, 22mm W, 21mm H, 17mm Stalk, 8mm bolt fixingNote: Available in chrome only.

LED Micro fairing indicatorsUinversal LED Micro Fairing Mount indicators are an ideal way to replace the large indicators which are standard on the majority of today’s bikes. Using the latest high intensity LEDs they offer modern styling, superior performance and a longer life. They complete with 3M adhesive pads on the rear for easy installation.Dimensions:64mm L, 32mm W, 20mm H

L

H

W

CODE DESCRIPTIONFM6 LED Micro fairing

L

H

W

StemTinyCators indicatorsTiny, yet perfectly formed from aluminium, TinyCators are just like indicators, only smaller. As bright as your standard units, but considerably more stylish; remember, gorgeous things come in small packages! Universal fitment, complete with bulbs and wiring.Available in clear, black and chrome.Dimensions:46mm L, 20mm W, 20mm H, 23mm Stalk, 8mm bolt fixing

CODE DESCRIPTIONTC1 Tinycators (pair) - ClearTC2 Tinycators (pair)- Black

CODE DESCRIPTIONTC5 Tinycators (pair) - ChromeTCBULB Bulb - 12v x 6w - each

FLASHING

TOO FAST?

See page 50

AllyCators indicatorsConventional bulb-version of the popular Allycators, dimensions are as LED version, simple to fit. Featuring robust aluminium body - available in clear or black with amber lenses.

CODE DESCRIPTIONAWL6 LEDAllyCators - Chrome

CODE DESCRIPTIONAWL1 AllyCators - Clear/amber lens (pair)AWL2 AllyCators - Black/amber lens (pair)AWL5 AllyCators - Chrome/amber lens (pair)BU21 Bulbs - 12v 23w - pairBU10 Bulbs - 12v 10w - pair

L

H

W

Stem

L

H

W

Stem

T E C H

FLASHINGTOO FAST?See page 50

CODE DESCRIPTIONTC3 LEDTinycators - ClearTC4 LEDTinycators - Black

FLASHING

TOO FAST?

See page 50

T E C H

m o t ra x . c o. u k

1

2

7

3

4

5

6

8

48


MicroArrow indicatorsUniversal Micro Arrow indicators are an ideal way to replace the large indicators which are standard on the majority of today’s bikes. Available in Black, or Carbon Look with either a clear or amber lens, the Micro Arrow indicators will compliment any bike. Universal fitment complete with bulbs and wiring. Dimensions:55mm L, 31mm W, 46mm H, 8mm Stalk, 9mm bolt fixing

L

H

W

Stem

CODE DESCRIPTIONAIN1 MicroArrow - Black/Amber lens - short stemAIN2 MicroArrow - Black/Amber lens - long stemAIN3 MicroArrow - Black/Clear lens - short stemAIN4 MicroArrow - Black/Clear lens - long stemAIN9 MicroArrow - Black/Iridium lens - short stem

CODE DESCRIPTIONAIN10 MicroArrow - Black/Iridium lens - short stemAIN5 MicroArrow - Carbon/Amber lens - short stemAIN6 MicroArrow - Carbon/Amber lens - long stemAIN7 MicroArrow - Carbon/Clear lens - short stemAIN8 MicroArrow - Carbon/Clear lens - long stem

CODE DESCRIPTIONAIN11 MicroArrow - Carbon/Iridium lens - short stemAIN12 MicroArrow - Carbon/Iridium lens - long stemBU21 Bulbs - 12v x 23w - pairBU10 Bulbs - 12v x 10w - pair

DinkyWinkaz indicatorsUniversal Dinkywinkaz indicators are the dinkiest winkers yet..! Ideal replacement for standard equipment on the majority of bikes. Available in Black or Carbon Look with a choice of Amber, Clear or Iridium lenses. Universal fitment complete with bulbs and wiring. Dimensions:55mm L, 23mm W, 41mm H, 22mm Stem, 9mm bolt fixing

L

H

W

Stem

CODE DESCRIPTIONDW1 DinkyWinkaz - Black/Amber lensDW2 DinkyWinkaz - Black/Clear lensDW3 DinkyWinkaz - Black/Iridium lensDW5 DinkyWinkaz - Carbon/Clear lensBU21 Bulbs - 12v x 23w - pairBU10 Bulbs - 12v x 10w - pair

MicroOval indicatorsUniversal Micro Oval indicators are an ideal way to replace standard large indicators. Available in Black, or Carbon Look with either a clear or amber lens, Micro Oval indicators look great on any bike. Universal fitment, complete with bulbs and wiring.ALSO AVAILABLE - LED VERSION Dimensions:55mm L, 23mm W, 41mm H, 22mm Stem, 9mm bolt fixing

L

H

W

Stem

CODE DESCRIPTIONOI1 MicroOval - Black/Amber lensOI2 MicroOval - Black/Clear lensOI4 MicroOval - Carbon/Clear lensOI5 MicroOval - Black/Iridium lensOI6 MicroOval - Carbon/Iridium lensOI7 MicroOval - LED Black/Clear lensBU21 Bulbs - 12v x 23w - pairBU10 Bulbs - 12v x 10w - pair

MicroDiamond indicatorsAre you bored with your big, ungainly, easily damaged standard indicators? Have you just bought a really trick High Level Exhaust pipe, only to get home and find out that the indicators are in the way? Problem solved with our Micro Diamond Indicators! These tiny indicators will fit almost any bike; they are just as bright as your original ones, but are less than half the size. They are available in a choice of Carbon Look or Black finish, and you can even choose between amber or clear lenses.ALSO AVAILABLE - LED VERSION Dimensions:55mm L, 31mm W, 46mm H, 8mm Stalk, 9mm bolt fixing

L

H

W

Stem

MicroFairing indicatorsUniversal Micro Fairing Mount indicators provide a streamlined alternative to the standard fitment ‘stalked’ indicators. Available with 4 lens types - Amber, Clear, Smoke and Iridium complete with 3M adhesive pads on the rear for easy installation. Dimensions:64mm L, 32mm W, 20mm H, Adhesive pad fixing

L

H

W

CODE DESCRIPTIONFM1 MicroFairing - Amber lensFM2 MicroFairing - Clear lensFM3 MicroFairing - Smoke lensFM4 MicroFairing - Iridium lensBU21 Bulbs - 12v x 23w - pairBU10 Bulbs - 12v x 10w - pair

Mini fairing indicatorsThese unique slimline indicators can be easily fitted to fairings and bodywork, giving a neat flush finish. Complete with bulbs and wiring and available in both Matt Black and Carbon Look finishes.We recommend that these indicators should be used in conjunction with standard manufacturer's lighting or other CE approved replacement indicators.Dimensions: 92mm L, 56mm W, 32mm H.

L

H

W

CODE DESCRIPTIONWL07 Mini Fairing - Black

T E C H

ALSO AVAILABLE

CODE DESCRIPTIONMIO1 DinkyWinkaz - Black/Amber lensMIO2 DinkyWinkaz - Black/Clear lensMIO4 DinkyWinkaz - Carbon/Clear lensMI10 DinkyWinkaz - LED Black/Clear lensBU21 Bulbs - 12v x 23w - pairBU10 Bulbs - 12v x 10w - pair

T E C H

ALSO AVAILABLE


1

2

7

3

4

5

6

8

49


L

H

W

Stem

Mini indicatorsThese mini indicators are manufactured with a choice of Carbon Look or Matt Black styling, adding that finishing touch. Complete with bulbs and wiring.We recommend that these indicators should be used in conjunction with standard manufacturers lighting or other CE approved replacement indicators.Dimensions:51mm L, 40mm W, 38mm H, 18/40mm Stalk, 8mm bolt fixing

CODE DESCRIPTIONWL01 Mini - Black/Amber - short stemWL02 Mini - Black/Amber - long stemWL10 Mini - Black/Clear - short stemWL11 Mini - Black/Clear - long stemWL14 Mini - Black/Iridium - short stemWL15 Mini - Black/Iridium - long stemWL04 Mini - Carbon/Amber - long stemWL12 Mini - Carbon/Clear - short stemWL13 Mini - Carbon/Clear - long stemWL16 Mini - Carbon/Iridium - short stemWL17 Mini - Carbon/Iridium - long stemMI05 Bulbs - 12v x 23w - pair

WibblyWobbly 1 Enduro indicatorsIdeal for bikes used off and on road, WibblyWobbly 1s have a strong, silicon stem, so instead of snapping off under impact, they will merely bend, then spring back into place undamaged. Complete with bulbs and wiring. (For off road use only)We recommend that these indicators should be used in conjunction with standard manufacturer's lighting or other CE approved replacement indicators Dimensions: 50mm L, 35mm W, 35mm H, 26mm Stalk.

L

H

W

Stem

CODE DESCRIPTIONIW1 WibblyWobbly1

INDICATORACCESSORIESINDICATORACCESSORIESINDICATORACCESSORIESINDICATORACCESSORIESINDICATORACCES-

INDICATORACCESSORIESINDICATORACCESSORIESINDICATORACCESSORIESINDICATORACCESSORIESINDICATORACCES-

FLASHINGTOO FAST?

Flash’it relayL.E.D. indicator problems?

Fix it in one easy step with this replacement flasher relay. Simply unplug the old and plug in the new, job done! No cutting of wires required when fitting the bike specific relays. Wires may need to be cut when using the universal relay.

CODE DESCRIPTIONFRH1 Flash’it - HondaFRH2 Flash’it - Honda (4 pin)FRK1 Flash’it - KawasakiFRY1 Flash’it - YamahaFRU1 Flash’it - Universal

IndyLeadsEach bike manufacturer uses different connectors for their indicators. This means that when fitting universal aftermarket indicators you need to cut the original connectors off and replace them with bullet fittings…Not any more! Simply connect the IndyLeads to between the original connector and the universal indicator… SIMPLES!!

IndySpacersFitting a set of after market indicators is now a straight forward task. The Motrax Indicator mounting kit neatly fills the holes in the fairing left by the standard indicators. Any

set of Motrax universal indicators can now be fitted without leaving unsightly gaps or holes at the mounting point. Rid your bike of the unsightly, oversized indicators and bolt on some style!!!

MAKE/MODEL YEAR FRONT REARHonda, CBR600 / RR 99>03 ISH1 ISH1Honda, CBR900RR 92> N/A ISH1Honda, CBR1000RR 04> ISH1 ISH1Honda, HORNET 600/900 2001 ISO1 ISO1Honda, HORNET 600/900 02> ISH1 ISH1Honda, SP1 / SP2 / Blackbird ALL N/A ISH1Kawasaki, ZX6R / RR 98-04 ISK1 ISK1Kawasaki, ZX7R ALL ISK1 ISK1Kawasaki, ZX9R 98-03 ISK1 ISK1Kawasaki, ZX12R ALL N/A ISK1Kawasaki, ZRX1200S ALL ISK1 ISK1Kawasaki, ZR7S 03> ISK1 ISK1

NOTE: In some instances indicator switch will remain active after ignition is turned off.

CODE DESCRIPTIONILH1 Honda/Kawasaki (2 Pack)ILH2 Honda 04/05 (2 Pack)ILS1 Suzuki (2 Pack)ILY1 Yamaha (2 Pack)

CODE DESCRIPTIONILH4 Honda/Kawasaki (4 Pack)ILH5 Honda 04/05 (4 Pack)ILS4 Suzuki (4 Pack)ILY4 Yamaha (4 Pack)

MAKE/MODEL YEAR FRONT REARSuzuki, SV650 99-02 ISS1 ISS1Suzuki, SV650/S 03> ISS2 ISS2Suzuki, GSXR 600 / 750 96-00 ISS1 ISS1Suzuki, GSXR 600 / 750 / 1000 01-05 ISS2 ISS2Suzuki, BANDIT 600/1200/1200S 01> ISS2 ISS2Suzuki, GSXR1300 HAYABUSA ALL N/A ISO1Suzuki, TL1000R / S ALL ISS1 ISO1Suzuki, SV1000 03> ISS1 ISS1Yamaha, THUNDERCAT ALL N/A ISY1Yamaha, FAZER600 98-03 ISY1 ISY1Yamaha, FZ6 / FZ1 FAZER 03> ISY3 ISY2Yamaha, YZF-R6 99-02 ISY1 ISY1Yamaha, YZF-R6 03-05 ISY2 ISY2Yamaha, YZF-R6 06> ISY3 ISY2Yamaha, YZF-R1 98-01 ISY1 ISY1Yamaha, YZF-R1 02> ISY3 ISY2Yamaha, FAZER 1000 98> ISY1 ISY1Yamaha, THUNDERACE ALL N/A ISY1Yamaha, FJR1300 98> ISY1 N/AMulti Fit Round ISO1 ISO1


1

2

7

3

4

5

6

8

50


LED Chrome BoltsThese LED Bolts are an ideal way to stylise your bike. High quality aluminium bolts have been carefully machined to allow for an internal LED which shines out through the side of the bolt. The chrome finish allows the bolts to stand up to the elements and road salt all year round.Can replace existing bolts to illuminate parts of the engine, number plate, swing arm etc

CODE DESCRIPTIONLEDCB Chromed LED bolts

Black Stainless Steel LED No. Plate LightOne of the first changes made to bikes by riders is to remove the large ugly number plate hanger. This can often leave the bike without a number plate light. This stainless steel unit solves this issue and due to its high quality will last for years to come. Made from black stainless steel with 3 bright white LED’s, the internals are sealed to keep water out ensuring you remain legal no matter what weather or conditions you ride in.

CODE DESCRIPTION

SNPL Stainless Steel LED No. Plate Light

LED Number Plate Light• Compact replacement for bulky OE fitments.• 12V low-power consumption with 3 super-

bright LEDs. • Single bolt fixing. • 300mm of cable includedDimensions: 55mm (W) 15mm (D) 40mm (L)

CODE DESCRIPTIONMNPL LED Number Plate Light

L

W

T E C H

T E C H

LED Number plate lightMany after market tail lights/ undertrays do not come complete with a numberplate light. This is a legal requirement and if not adequate can lead to unwanted attention when riding at night. The Motrax LED Number Plate Light contains 4 high intensity LED’s and can be positioned on either the bodywork or numberplate to achieve the best effect. Available in Black or Clear Aluminium.

T E C H

CODE DESCRIPTIONLPL1 LED Number plate light - ClearLPL2 LED Number plate light - Black

L.E.D.-Eyes rear light unitGive your motorcycle a new and unique look with these stunning round LED rear lights. Easy to fit, replacing

bulky OE fitments, L.E.D.-Eyes incorporates running light, brake light and numberplate light behind a clear lens in a lean, light unit, really flaunting your bike’s rear Dimensions (approx.) 170mm (L) x 100mm (W) x 50mm (D)

CODE DESCRIPTIONLEDE2 L.E.D.-Eyes - ChromeLEDE3 L.E.D.-Eyes - Matt Ally

T E C H

T E C H


1

2

7

3

4

5

6

8

51


LED Shark rear light unitGive your motorcycle a new and unique look with these sharp looking LED rear lights. Easy to fit, replacing bulky OE

fitments.LED Shark uses the latest ultra-

bright LEDs which incorporates running light, brake light behind a clear lens in a lean,

light unit, really flaunting your bike’s rear. Dimensions (approx.) 130mm (W) 35mm (H) 75mm (D).

CODE DESCRIPTIONLEDS1 LED Shark rear light unit

LEDCyclops rear light unitUsing the latest ultra-bright LED technology Cyclops LED tail lights offer uncompromised performance. Easy to fit, with tail, brake and number plate light all incorporated into a quality unit with built in numberplate bracket. Available in Black, Chrome and Matt Aluminium.Dimensions (approx.) 170mm (W) 50mm (D) 70mm (H).

T E C H

CODE DESCRIPTIONLEDC1 LEDCyclops - BlackLEDC2 LEDCyclops - ChromeLEDC3 LEDCyclops - Matt Aluminium

LEDLitedistrik rear light unitAdvertise your presence on the road with these funky LED rear lights. Available in two sizes and easy to fit, replacing bulky OE fitments, LEDLiteDistrik use the latest ultra-bright LED technology. Incorporates running light, brake light and number-plate light behind a clear lens in a lean, light unit, really flaunting your bike’s rear. Dimensions (approx.) LEDL1: 110mm (L) x 28mm (W) x 32mm (D) LEDL2: 120mm [L) x 33mm (W) x 38mm (D)

CODE DESCRIPTIONLEDL1 LEDLitedistrik - smallLEDL2 LEDLitedistrik - Large T E C H

LEDFoxTail rear light unitBrighten up your bike with these eye-catching LED lights. By using the latest extra-bright LED technology, the LED FoxTail units are far brighter than standard bulbs. The units incorporate a running light, brake light and number-plate light. LED Foxtail gives improved visibility in a stylish, easy to fit unit with a choice of chrome or black finishes. Dimensions (approx.) 160mm (L) x 45mm (W) x 50mm (D)

CODE DESCRIPTIONLFT1 LEDFoxTail - BlackLFT2 LEDFoxTail - Chrome

T E C H

T E C H


1

2

7

3

4

5

6

8

52


H4/H7 Bulb Travel KitsEverything you need for your journey in a

tough plastic case. Carrying spare bulbs is now a legal requirement throughout most of the EU community. Avoid being stranded in darkness on an unfamiliar road, or the unwanted attention of the long arm of The Law - pack a kit in your luggage today.

UPGRADE and REPLACEMENT LIGHT BULBS

SCOOTER UPGRADEScooter VisionHalogen 35W Replacement bulbHad enough of that pathetic candle-light output from your standard scooter headlamp? Be safe and be seen - and see what's ahead with this Halogen upgrade. UV blocker - safe for use with plastic headlamp lenses these 12v 35/35W main and dip headlamp bulbs cast a brighter, whiter light for the road ahead.

CODE DESCRIPTIONPSS2 ScooterVision 12v 35/35W Bulb

Base of bulb contacts

CODE DESCRIPTIONPBKH4 H4 Power Bulb KitPBKH7 H7 Power Bulb Kit

H4 MotoVision BulbsDesigned especially to make motorcycles more visable, MotoVision bulbs give the rider a clear white light, but the oncoming driver or pedestrian will see an orange tint. This will set the bike apart from the sea of white and blue lights from cars and trucks. Featuring 40% more white light than any other bulb with a 10-20 metres longer beam.

CODE DESCRIPTIONPBMH4 H4 MotoVision bulb (single)

H7 BlueVision BulbsDesigned especially to make motorcycles more visible, MotoVision bulbs give the rider a clear white light, but the oncoming driver or pedestrian will see an orange tint. This will set the bike apart from the sea of white and blue lights from cars and trucks. Featuring 40% more white light than any other bulb with a 10-20 metre longer beam.

CODE DESCRIPTIONPBVH7 H7 BlueVision bulb (single)

H4/H7 Xtreme BulbsThe ultimate in direct bulb upgrades. X-treme Power bulbs enhance your headlights with up to 80% more light than standard halogen bulbs, yet they're fully road legal and are made to the highest possible standards meaning they will last just as long too. Extreme performance for bikers who demand the very best headlights.

CODE DESCRIPTIONPBXH4T H4 Xtreme bulbs (pair)PBXH7T H7 Xtreme bulbs (pair)

H7 Vision Plus BulbsVision Plus xenon headlight bulbs provide up to 50% more light on the road. Vision Plus bulbs are E marked and road legal.

CODE DESCRIPTIONPPH7 H7 Vision Plus bulb (single)

Motrax Replacement BulbsStand out from the crowdOur range of headlamp bulbs are specifically designed to meet the needs of the modern motorcyclist. With improved brightness, longer beam throw and increased lifespan, these bulbs are the ideal replacement and upgrade to original fitment on all motorcycles.

Documents

World_06_Lighting