WORLD CLASS LAUNDRY, DRYCLEANING, APPAREL …4.imimg.com/data4/UG/CF/GLADMIN-189275/cl_stefab.pdf · Inverter Drive Single motor variable frequency drive ( VFD ) gets all precision

WORLD CLASS LAUNDRY, DRYCLEANING, APPAREL PROCESSING & FINISHING MACHINES. MADE IN INDIA.

Copyright © All rights reserved.

Indeed, in this interface of vision & reality , the idea is born. For Stefab,

it all began in the year 1975. A desire to simply do what no other Indian

company had done before: “Make user-friendly, cost-effective, industrial

Laundry, Drycleaning, Apparel Processing & Steam Finishing machines.

At par with world standards, right here, in India.” Where did this take us ?

Today, 18000 square meters of ‘state-of-the-art’ manufacturing facilities,

Computer aided designs and 400 qualified & experienced workforce

attribute to the high standards of Stefab machines used worldwide. With

over 7000 major installations & many more projects later, Stefab quality

& expertise continue to remain unqualified. Facts, that have translated

into Stefab becoming the largest & most preferred manufacturer of India.

“ uality is as much in the actual product, as in the mind.”Q

Deepak Arora Founder & Managing Director

ISO 9001-2008 CERTIFIED

JAS-ANZ

®

NORWEGIANACCREDITATION

MSYS 013PCMS

F ER

C

E

T

P

I O

N

CO

M M

T

I T

N

M E

• •

M3111204IN C E R T I F I E D

Inverter Drive.

Single motor variable frequency drive ( VFD ) gets all precision speeds required for washing, distribution, low & normalspin. The energy efficient drive consumes less energy & reduces electric peak load demands.

Washer Extractors. High Spin. Soft Mount.

Micro Computer.

Fully programable computer captures all the features for any customized process. The preset programs can be easily modified or erased. Step by step LCD display provides cycle advance, variable time signal & diagnostic checks. Easy to operate.

Front Loading. Stainless Steel Cabinet. Computer Controlled.15, 30, 60 & 120 kg. Capacity.

Bearing Housing.

The housing has wide roller bearings to have large contact area to disperse dynamic forces. Packed with lubricants & sealed. The self lubricating twin water seals & bearing seal are air separated. Prevents contact of water with the bearings.

2700for

AXS1 20T

W

H

ELECTRICCONNECTION

AIR VENT WATERCONNECTION

STEAM CONNECTION

DRAIN

D

DRAIN for AXS 120T

2nd

5 Compartment Dispenser.

Five different chemicals can be placed in plastic containers in powder, liquid or gel form. Powerful jets completely flush out the chemicals as and when signaled by the computer. Optional : Liquid chemical supply connections for automatic Dozing Pumps.

Self Unloading.

Hydraulic forward tilt on 120kg machine drops the entire load into a trolley in less than 30 seconds. One operator can handle upto4 machines. No pulling or tearing of linen. Huge savings on time & labor.

Model AXS-Steam Heated • AXE-Electric Heated • T-Forward Tilt

ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz, AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.

CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES. HIGHER ‘G FORCE’ ON REQUEST.

MODEL

AXS 30AXE 30

AXS 60AXE 60

AXS 120TForward

Tilt

30 Kg

60 Kg

120 Kg

Ø 900 x 500

318 Ltrs

CYLINDER SIZE

Ø 1100 x 650

617 Ltrs

Ø 1350 x 850

1216 Ltrs

3.75 KW

DRIVEMOTOR

7.5 KW

15 KW

1.5 KW

CYLINDER SPEEDS

WASH FINAL EXTRACT

40 to 50RPM

35 to 45RPM

30 to 35RPM

Ø 500

Ø 650

Ø 800

LOADINGDOOR

OPENING

WATERCONNECTION

CONSUMPTION

Ø25 (1” BSP)

400 Ltrs / cycle

Ø38 (1.5” BSP)

800 Ltrs / cycle

Ø50 (2” BSP)

1600 Ltrs / cycle

Ø 65

Ø 65

Ø 652Nos

DRAIN

HEATING

STEAM CONN.

STEAM CONSUMP. LOAD

AXS 30Ø15 (0.5” BSP)

30 Kg / hr

AXS 60Ø15 (0.5” BSP)

60 Kg / hr

AXS 120TØ25 (1” BSP)

120 Kg / hr

AXE 3012-18 KW

AXE 6024-36 KW

-

DIMENSIONSW x D x H

NET WT / CRATED WTCRATED SIZE: WxDxH

CRATED VOLUME

1380 Kg / 1560 Kg1600 x 1700 x 2025

5.5 M³

2380 Kg / 2670 Kg1900 x 2000 x 2350

4250 Kg / 4670 Kg2250 x 2350 x 2600

13.74 M³

AXS 15AXE 15

15 Kg

Ø 720 x 380

154 Ltrs

1.5 KW 45 to 55RPM

Ø 400Ø20 (0.75” BSP)

200 Ltrs / cycleØ 65

AXS 15Ø15 (0.5” BSP)

15 Kg / hr

AXE1512 KW

790 Kg / 880 Kg1350 x 1360 x 1800

3.3 M³

1050 x 1060 x 1500

1300 x 1400 x 1725

1950 x 2050 x 2300

1600 x 1700 x 2025

VOLUMEELECTRIC

Tilt Motor

dry weight per charge (1:10)

CAPACITY

8.93 M³

G FORCE

780 to 840 RPM

700 to 760 RPM

635 to 685 RPM

870 to 940 RPM

304 to 353 G

301 to 355 G

305 to 354 G

304 to 355 G

‘AX’ Range

Copyright © All rights reserved. Stefab India Limited. Email : [email protected] Web : www.stefab.com

Inner Cylinder

DOORS

Outer Drum

1 No. Open Pkt

2 Nos.

1 No. Open Pkt2 Nos.

2 Nos. ‘D ' Shape2 Nos.

Model BXS-Steam Heated • BXE-Electric Heated


CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES. HIGHER ‘G FORCE’ ON REQUEST.

MODEL

BXS 30BXE 30

BXS 60BXE 60

BXS 120

30 Kg

60 Kg

120 Kg

Ø 750 x 730

322 Ltrs

CYLINDER SIZE

Ø 950 x 900

637 Ltrs

Ø 1200 x 1100

1243 Ltrs

3.75 KW

DRIVEMOTOR

7.5 KW

15 KW

CYLINDER SPEEDS

WASH FINAL EXTRACT

40 to 50RPM

35 to 45RPM

30 to 35RPM

WATERCONNECTION

CONSUMPTION

Ø25 (1” BSP)

400 Ltrs / cycle

Ø38 (1.5” BSP)

800 Ltrs / cycle

Ø50 (2” BSP)

1600 Ltrs / cycle

Ø 65(2.5” BSP)

Ø 65(2.5” BSP)

Ø 65 - 2Nos(2.5” BSP Each)

DRAIN

HEATING

STEAM CONN.

STEAM CONSUMP. LOAD

BXS 30Ø15 (0.5” BSP)

30 Kg / hr

BXS 60Ø15 (0.5” BSP)

60 Kg / hr

BXS 120Ø25 (1” BSP)

120 Kg / hr

BXE 3012-18 KW

BXE 6024-36 KW

-

DIMENSIONSW x D x H


CRATED VOLUME

1310 Kg / 1430 Kg1900 x 1500 x 1950

5.55 M³

2280 Kg / 2460 Kg2400 x 1750 x 2300

4100 Kg / 4320 Kg2900 x 2050 x 2600

15.45 M³

1600 x 1200 x 1650

2600 x 1750 x 2300

2100 x 1450 x 2000

VOLUMEELECTRIC


CAPACITY

9.66 M³

G FORCE

820 to 890 RPM

740 to 800 RPM

670 to 730 RPM

300 to 357 G

305 to 357 G

300 to 354 G

Clean Linen Area

Clean / Sterlized Linen out

D

Infected &Contaminated Linen Area

Glazed Partition

Contaminated Linen in

H

W

STOP

LINEN

INFECTION

Inverter Drive

Single motor variable frequency drive ( VFD ) gets all precision speeds required for washing, distribution, low, normal & high spin. The energy efficient drive consumes less energy & reduces electric peak load demands.

Infection Barrier Washer Extractors.

Micro Computer


High Spin. Soft Mount. Stainless Steel Cabinet. Computer Controlled.30, 60 & 120 kg. Capacity.

Tuned Suspension

Dynamically tuned topsuspension with HydraulicCushions absorb even severeout-of-balance load vibrationsand remains silent. No specialfoundations required & themachine can be installedon any floor that can hold itsdead weight.

Powerful Brake

Electro-Pneumatic / Electro Magnetic Powerful Brake applies automatically as the machine stops. Activates instantly at the time of alignment of inner cylinder door with the outer drum door. Self adjusting brake liners. Easily adjustable brake pressure.Fail safe.

‘BX’ Range


5 Compartment Dispenser

Five different chemicals can be placed in plastic containers in powder, liquid or gel form. Powerful jets completely

flush out the chemicals as and when signaled by the computer. Optional : Liquid chemical supply connections for automatic Dozing Pumps.

STEAM CONNECTION

WATER CONNECTION

“Non Clog Full Clear Port” motorized drain valve flushes all the lint during drain. Easily accessible electric motor is splash proof. Manual lever to activate drain in case of motor failure. Fail safe, rust free operation through out Its life.

AIR VENT

Efficient, Inverter Drive.

Single motor variable frequency drive ( VFD ) gets all precision speeds required for washing, distribution, low & normalspin. The energy efficient drive consumes less energy & reduces electric peak load demands.

Motorized Drain Valve.

ELECTRIC CONNECTION

Washer Extractors. Normal Spin. Hard Mount.

DRAINCONNECTION

5 Compartment Dispenser.

Easy to use Computer.


Five different chemicals can be placed in plastic containers in powder, liquid or gel form. Powerful jets completely flush out the chemicals as and whensignaled by the computer. Optional : Liquid supply connections for automaticDozing Pumps.

Front Loading. Stainless Steel Cabinet. Computer Controlled.15, 23 & 30 kg. Capacity.

D

H

W


RIGID MOUNT MACHINES ARE RECOMMENDED FOR INSTALLATIONS ON GROUND / BASEMENT FLOOR & ON BOARD SHIPS. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.

Model NXS-Steam Heated • NXE-Electric Heated

MODEL

Ø 720 x 570

232 Ltrs

CYLINDER SIZE

Ø 900 x500

318 Ltrs

2.2 KW

DRIVEMOTOR

3.75 KW

CYLINDER SPEEDS

WASH FINAL EXTRACT

45 to 55RPM

40 to 50RPM

500 RPM

450 RPM

Ø 400

Ø 500

LOADINGDOOR

OPENING

WATERCONNECTION

CONSUMPTION

Ø20 (0.75” BSP)

300 Ltrs / cycle

Ø25 (1” BSP)

400 Ltrs / cycle

Ø 65

Ø 65

DRAIN

HEATING

STEAM CONN.

STEAM CONSUMP. LOAD

NXS 23Ø15 (0.5” BSP)

23 Kg / hr

NXS 30Ø15 (0.5” BSP)

30 Kg / hr

NXE 2312 KW

NXE 3012-18 KW

DIMENSIONSW x D x H


CRATED VOLUME

Ø 720 x 380

154 Ltrs1.5 KW 45 to 55

RPM500 RPM Ø 400

Ø20 (0.75” BSP)

200 Ltrs / cycle Ø 65

NXS 15Ø15 (0.5” BSP)

15 Kg / hr

NXE1512 KW

870 x 1000 x 1480

870 x 1200 x 1480

1050 x 1200 x 1630

VOLUMEELECTRIC

NXS 15NXE 15

NXS 23NXE 23

NXS 30NXE 30

23 Kg

15 Kg

30 Kg

690 Kg / 820 Kg1170 x 1500 x 1780

810 Kg / 930 Kg1350 x 1500 x 1930

610 Kg / 715 Kg1170 x 1300 x 1780

3.9 M³

3.12 M³

2.70 M³

‘NX’ Range


CAPACITY


`

Front Loading Washing Machines with Low Spin Extract.

STEAM CONNECTION

WATER CONNECTIONAIR VENT

DRAINCONNECTION

ELECTRICCONNECTION

DW

H

Front, inner cylinder, loading door, outer drum & chemical dispenser all in S.S. Electrically interlocked door stops the machine when opened. Hot painted structure frame. Front & back service. Requires little space on sides. Long Rust Free Life.

Electrical Control Panel. Low Spin Extract.

All Stainless Steel.

Motorized Drain Valve

Automatic Time, Temperature & Level Control.30, 60 & 120 kg. Capacity.

“Non Clog Full Clear Port” motorized drain valve flushes all the lint during drain. Easily accessible electric motor is splash proof. Manual lever to activate drain in case of motor failure. Fail safe, rust free operation through out Its life.


Model LXS-Steam Heated • LXE-Electric Heated

MODEL

Ø 1100 x 650

617 Ltrs

CYLINDER SIZE

Ø 1350 x850

1216 Ltrs

WASH MOTORCYLINDER SPEEDS

WASH EXTRACT

33RPM

26RPM

200 RPM

160 RPM

Ø 650

Ø 800

LOADINGDOOR

OPENING

WATERCONNECTION

CONSUMPTION

Ø38 (1.5” BSP)

800 Ltrs / cycle

Ø50 (2” BSP)

1600 Ltrs / cycle

Ø 65

Ø 652 Nos.

DRAIN

HEATING

STEAM CONN.

STEAM CONSUMP. LOAD

LXS 60Ø15 (0.5” BSP)

60 Kg / cycle

LXS 120Ø25 (1” BSP)

120 Kg / cycle

LXE 6018-24 KW

-

DIMENSIONSW x D x H


CRATED VOLUME

Ø 900 x 500

318 Ltrs2.2 KW

33RPM

200RPM

Ø 500Ø25 (1” BSP)


LXS 30Ø15 (0.5” BSP)

30 Kg / cycle

LXE3012-18 KW

1050 x 1200 x 1600

1300 x 1450 x 1800

1550 x 1900 x 2000

VOLUMEELECTRIC

LXS 30LXE 30

LXS 60LXE 60

LXS 120

60 Kg

30 Kg

120 Kg

910 Kg / 1060 Kg1600 x 1750 x 2100

1460 Kg / 1710 Kg1850 x 2200 x 2300

750 Kg / 870 Kg1350 x 1500 x 1900

9.36 M³

5.88 M³

3.84 M³

EXTRACT MOTOR

0.75 KW

3.75 KW

2.2 KW

7.5 KW

3.75 KW

CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES.

‘LX’ Range


CAPACITY

Mounted on top front. Individual controls for automatic time of wash, rinse & low spin extract. Auto reverse. Automatic digital temperature control. Automatic 3 water level control. Solenoid operated of water & steam valves. Intermediate Low Spin Extract flushes out soap. Final Extract makes articles lighter to unload. Reduced number of rinses. Saves water, time & labor.


Side Loading Washing Machines. Full Stainless Steel Body. Automatic Time & Temperature Control. 15, 30, 60, 120 & 240 kg. Capacity.

Idler / Gear Box Positive Drive.Multi V belts driven on multi groove idler pulleys or through an electric motor coupled with Reduction Gear Box unit provide positive drive to the

Side plates, outer drum, inner cylinder, doors, chemical dispenser, front, sides, top & back covers all in S.S. Side hinged door

Electrical Control Panel.All Stainless Steel.

with inner cylinder. Electrically interlocked sliding door with outer drum stops the machine when opened. Long rust free life. Operator’s safety.

Model WMS-Steam Heated • WME-Electric Heated.

W

H

DW

H

WATER CONNECTION

STEAM CONNECTION

WMS 240WATER CONNECTION

STEAM CONNECTION ELECTRICCONNECTION

DRAINCONNECTION

Individual push button timed controls for wash & rinse. Auto reverse. Digital temperature control. Solenoid operated steam valve. Easy to operate..

main drive pulley of the inner cylinder. Simple V- belts tensioning device. Silent drive. No cylinder speed loss.

1220 Kg / 1410 Kg2800 x 1580 x 1620

2280 Kg / 2580 Kg4620 x 1960 x 1620

WMS 60WME 60

14.66 M³

7.16 M³

930 Kg / 1080 Kg2220 x 1380 x 1490

4.56 M³

WMS 30WME 30

Ø 700 x 830

319 Ltrs0.75 KW

2.2 KW

3.75 KW

7.5 KW

MODEL SIZE VOLUME

WASHMOTOR

NET WT / CRATED WT CRATED SIZE WxDxH

CRATED VOLUME

WMS 120

WMS 240

LOADINGDOORSIZE

WATER

CONNECTION

CONSUMPTION

DRAIN STEAM CONN.

STEAM CONSUMP.ELECTRIC

HEATINGDIMENSIONS

W x D x H

550 x 350

650 x 400

800 x 450

800 x 4502 Nos

Ø25 (1” BSP)

500 Ltrs / cycle

Ø38 (1.5” BSP)

1000 Ltrs / cycle

Ø50 (2” BSP)

2000 Ltrs / cycle

Ø75 (3” BSP)

4000 Ltrs / cylce

Ø 65(2.5” BSP)

Ø 75(3” BSP)

Ø 100(4” BSP)

Ø 150(6” BSP)

WMS 30 15 (0.5” BSP)

40 Kg / hr

WMS 60

15 (0.5” BSP)

80 Kg / hr

WMS 24025 (1” BSP)300 Kg / hr

WME 3018 KW

WME 6024 KW

-

1550 x 880 x1090

1920 x 1080 x1190

2500 x 1280 x1320

4320 x 1660 x1320


WMS 15WME 15

15 Kg

Ø 550 x 650

154 Ltrs0.37 KW 400 x 300

Ø20 (0.75” BSP)

250 Ltrs / cycle

30 Kg

60 Kg

Ø 50(2” BSP)

WMS 15 15 (0.5” BSP)

20 Kg / hr

WME 1512 KW

1050 x 720 x950

120 Kg

240 Kg

570 Kg / 690 Kg1850 x 1180 x 1390

3.03 M³

360 Kg / 450 Kg1350 x 1020 x 1250

1.72 M³

-

WASHSPEED

45 RPM

40 RPM

37 RPM

32 RPM

32 RPM

Ø 900 x 970

616 Ltrs

Ø 1100 x 1300

1234 Ltrs

Ø 1100 x 2600

2468 Ltrs

CYLINDER

Ø

Ø

Ø

Ø


25 (1” BSP) ØWMS 120

150 Kg / hr

‘WM’ Range


CAPACITY


Hydro Extractors. Direct Drive. Self Balancing.Stainless Steel Body. Automatic DC Injection Brake.15, 30 & 60 kg. Capacity.

Inner cylinder can be dismantled without dismantling outer drum. Electrically interlockedtop Lid stops the machine when opened. Three position drain

DC ( Direct current - Low voltage ) brake applies automatically after timed run of the machine. Running and braking time are digitally controlled.

Stainless Steel Cylinder & Outer Drum.

Cylinder is directly mounted on to a specially designed high torque heavy duty motor resting on spigot of the base frame with built-in Rubber Buffer cushion

Direct Drive, Self Balancing. Automatic DC injection Brake.

W

DRAINCONNECTION

ELECTRICCONNECTION

H

REAR DRAIN

D

DRAINCONNECTION

connection with outer drum. Outer casing mounted on galvanized & hot painted heavy base frame. Long rust free life & strength.

No foot pedals. No levers. No brake liners. No maintenance. Convenience & safety for the operator.

for self balancing. No ‘V’ Belts. No speed loss. Quick self balancing. Noiseless & vibration less performance.


370 Kg / 470 Kg1240 x 1440 x 1400

880 Kg / 1030 Kg1550 x 1850 x 1450

HX 30

4.15 M³

2.49 M³

270 Kg / 350 Kg1100 x 1300 x 1350

1.93 M³HX 15

MODELNET WT / CRATED WT CRATED SIZE: WxDxH

CRATED VOLUME

HX 60

DIMENSIONSW x D x H

CYLINDER

SIZE

VOLUME

CYLINDERSPEED

MOTOR DRAIN

15 Kg

30 Kg

60 Kg

550 x 30071 Ltrs

Ø

700 x 300115 Ltrs

Ø

1000 x 300235 Ltrs

Ø

1000RPM

1000RPM

750RPM

2.2 KW

3.75 KW

7.5 KW

Ø 65 (2.5” BSP)

Ø 65 (2.5” BSP)

Ø 75 (3” BSP)

800 x 1000 x 1050

940 x 1140 x 1100

1250 x 1550 x 1150

CAPACITYDry weight per charge

‘HX’ Range


Drying Tumblers.

Stainless Steel Cylinder. Microprocessor Control. Reversible.15, 30, 60, 120 & 200 kg. Capacity.

Not RequiredFor MultipleInstallation

ELECTRICCONNECTION

STEAMCONNECTION

EXHAUSTDUCT

W D

H

NET WT / CRATED WTCRATED SIZE (WxDxH)

CRATED VOLUMEMODEL

15 Kg

410 Kg / 490 Kg

1200 x 1500 x 2080

3.74 M³

DRE 15

9 / 13.5 KW

STEAM CONNECTION

CONSUMPTION

THERMIC FLUIDCONNECTION

CONSUMPTION

HEATING

W x D x H

0.37 KW

0.37 KW

DRD 60

900 x 1200

x 1780

CYLINDERSIZE

VOLUME

LOADINGDOOR

OPENING

EXHAUSTDUCTSIZE

ELECTRICLOAD

DIESELCONN.

CONSUMP.

DIMENSIONS

Ø 800 x 600

Ø 1280 x 950

Ø 1600 x 1200

Ø 500

Ø 800

Ø 1000

1.5 KW

1.5 KW

2.25 KW

180 x 180

300 x 300

2 Nos

DRS 15Ø15 (0.5” BSP)

15 Kg / hr

DRS 60Ø15 (0.5” BSP)

60 Kg / hr

DRS 120Ø25 (1” BSP)

120 Kg / hr

1380 x 1700

x 2340

1760 x 2100

x 2900

920 Kg / 1090 Kg

1680 x 2000 x 2640

8.87 M³

1720 Kg / 1950 Kg

2060 x 2400 x 3200

15.8 M³

DRIVEMOTOR

BLOWERMOTOR

120 Kg

301 Ltrs

1221 Ltrs

2411 Ltrs1.5 KW 2 Nos

DRS 120 - DRT 120

DRD 120 - DRG 120

DRS 200T - DRT 200TDRD 200T - DRG 200T

30 Kg

60 Kg

200 Kg

Ø 950 x 850

602 Ltrs

Ø 1800 x 1600

4069 Ltrs

0.75 KW

0.75 KW

3.75 KW

2.2 KW

Ø 650

Ø 1200

DRS 30Ø15 (0.5” BSP)

30 Kg / hr

DRS 200Ø25 (1” BSP)

200 Kg / hr

DRT 30

DRT 200

1050 x 1500

x 1980

1970 x 2600

x 3250

570 Kg / 690 Kg

1350 x 1800 x 2280

5.54 M³

2680 Kg / 3030 Kg

2270 x 2900 x 3550

23.36 M³

GAS CONN.

CONSUMP.

DRT 60

DRT 120

DRE 60

36 / 48 KW

DRD 30

DRD 120

DRE 30

18 / 24 KW

DRG15/DRL15

EXHAUSTDUCT for120 & 200 kgModels

2 Nos

210 x 210

300 x 300

400 x 280

2 Nos

Forward Tilt Models

3500for

ForwardTilt Models

Model DS-Steam Heated • DE-Electric Heated • DT-Thermic Fluid Heated • DD-Diesel Radiator Heated • DG-Gas Radiator Heated • DL-Live Gas Heated

2nd

Steam/Thermic Fluid Radiator.

Steam Radiator is of copper coils & aluminumfins. Thermic Fluid Radiator is of steel coils & aluminum fins.Maximum thermalconductivity.

Live Gas Radiator.

Enclosed box type construction. Full length burner tube.Regulated gas & fire flame Interlocked with fresh air intake.Safe & efficient.


DRS 15 - - -

DRE 15

DRG 15DRL 15DRT 15

DRD 15

Dry weightper charge

(1:20)

CAPACITY

Ø6 (0.25” BSP)1.8 Ltrs / hr

Ø6 (0.25” BSP)2.5 Ltrs / hr

Ø15 (0.5”BSP)7.5 Ltrs / hr

Ø15 (0.5”BSP)11 Ltrs / hr

DRT 15

Ø6 (0.25” BSP)1 Kg / hr

Ø6 (0.25” BSP)2 Kg / hr

DRG 30/DRL 30

DRG 60/DRL 60

DRG 120Ø15 (0.5”BSP)

8 Kg / hr

DRG 200Ø15 (0.5”BSP)

12 Kg / hr

8000 KCal / hr

32000 KCal / hr

64000 KCal / hr

110000 KCal / hr

Ø15 (0.5”BSP)4 Kg / hr

Ø15 (0.5”BSP)4 Ltrs / hr


16000 KCal / hr

DRD 200

DRD 15Ø15 (0.5” BSP)

Ø15 (0.5” BSP)

Ø20 (0.75” BSP)

Ø25 (1” BSP)

Ø25 (1” BSP)

Micro ComputerControl.

Self CleaningLint Screen.

For automatic drying & cool-down time with digital temperature control. Step by step LCD display shows cycle status.Easy to use.

The wire mesh screen drops the lint by itself at the bottom at the end of each cycle. Cleaning not required after every operation.

Diesel/Gas Radiator.

Main Chamber & Return Flue Gas pipes in thick steel tubes. Fitted with Diesel or Gas burner.Maximum heatutilization.

Self Unloadingon 200kg Machine.

Forward tilt drops the load into a trolley within 30 sec. Savings on time & labor.

200 KG FORWARD TILT MACHINE REQUIRES AN AIR CONNECTION OF ø12 WITH CONSUMPTION OF 80 LTRS / MINUTE.

DRS 30 - - -

DRE 30

DRG 30DRL 30DRT 30

DRD 30

DRS 60 - - -

DRE 60

DRG 60DRL 60DRT 60

DRD 60

‘DR’ Range


Flatwork Drying Ironer. Chest Heated. Return Feed Type. ( Front Feed, Front Return. )

Fabricated in steel. Precision machined with drilled perforations. Zinc electroplated. Runs on self aligning ball bearings with moisture exhaust. Padded with galvanized springs & heat resistant double layer polyester padding. Long roller & padding life.

Roller & Padding.

.

Inverter Drive.

Single motor working in conjunction with variable frequency drive (VFD) provides precision & variable speeds for roller. Digital temperature control. Rocker switch for automatic chest movement. Auto cut for false feeding and finger safety guard. Operator’s safety & convenience.

Precision machined,ground smooth & polished. Slides at both ends through pneumatic cylinders. Perfect contact with the roller. Adjustable & uniform ironing pressure across the entire roll. Finest drying as well as ironing of flat linen.

Gear Box & Chain Drive.

Roller is driven by an electric motor coupledwith a reduction gear box unit which is lubricant packed & sealed. The final transmission is through sprockets & chain. Easy chain tensioning device. Silent & maintenance free. No slippage or cylinder speed loss.

W

H

ELECTRICCONNECTION

D

MOIST AIREXHAUST

Front Feed - Front Return. Can be Installed against a wall.


THE ABOVE MODEL SHALL TAKE LINEN STRAIGHT FROM WASHER EXTRACTOR & DRY & IRON SIMULTANEOUSLY. ELECTRIC LOAD IS FOR THE PURPOSE OF DESIGNING UTILITY.

NET WT / CRATED WT) CRATED SIZE (WxDxH)

CRATED VOLUMEMODEL

0.2 KW280 Kg / 360 Kg2300 x 700 x 1230

1.98 M³

ROLLERDIA

(Padded)

ROLLER

LENGTH

ROLLER

SPEED

DRIVE

MOTOR

SUCTION

MOTOR

ELECTRIC

HEATINGDIMENSIONS

W x D x H

250 1500

1 to 4

Mtrs / Min

(Variable)0.37 KW 2100 x 500

x 1030FRE 25-150 4.5 / 9 KW

‘FR’ Range. Roller Size: Ø250 x 1500L

Ironing Chest.


Flatwork Drying Ironers. Chest Heated. Return Feed Type. ( Front Feed, Front Return. )

W

H

STEAM / THERMIC FLUID CONNECTION

Front Feed-Front Return. Can be installed against a wall.

D

ELECTRICCONNECTION

MOIST AIREXHAUST

STEAM CONDENSATE

.

Variable Frequency Drive.

Single Motor with VFD provides precision speeds for roller. All digital controls.Auto cut for false feeding and finger safety guard. Operator’s safety& convenience.

Roller is precision machined with drilled perforations. Axial moisture exhaust. Gear driven. Padded with galvanized springs & polyester padding. Long roller & padding life.

Roller &Padding.

Precision machined & polished. Slides on pneumatic cylinders. Adjustable & uniformironing pressure across the entire roll. Finest drying & Ironing.

Ironing Chest.

Conveyor Feed Belts.

Polyester belts with welded seams are joined with detachable S.S. Combs. The feed roller is chain driven. Quick belt tensioning with easy replacement. No slippage or speed loss.

Roller is driven through a reduction gear box unit coupled with an electric motor. Simultaneous drive transmission to the conveyor feed belts. Silent drive. No speed loss.


Gear Box &Chain Drive.



Model FRS-Steam Heated • FRE-Electric Heated • FRT-Thermic Fluid Heated

ALL THE ABOVE MODELS SHALL TAKE LINEN STRAIGHT FROM WASHER EXTRACTOR & DRY & IRON SIMULTANEOUSLY. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.

Ø

NET WT / CRATED WT

CRATED SIZE (WxDxH)

CRATED VOLUME

MODEL

0.37 KW1100 Kg / 1300 Kg3250 x 1100 x 1530

5.46 M³

ROLLERDIA

(Padded)

ROLLER

LENGTH

ROLLER

SPEED

DRIVE

MOTOR

SUCTION

MOTORSTEAM

CONNECTIONCONSUMPTION


CONSUMPTION

HEATINGAIR CONNECTION

AIR CONSUMPTIONDIMENSIONS

W x D x H

380 2000

2 to 6

Mtrs / Min

(Variable)

0.75 KW 20 (0.75”BSP) 15 Ø (0.5”BSP)

2950 x 800

x 1230

FRS 38-200

FRE 38-200

FRT 38-200

FRS 38-200 FRT 38-200

ELECTRIC

15 Ø (0.5”BSP)12 / 18 KW

Ø50 Ltrs / hr

FRE 38-200

50 Kg / hr 27000 KCal / hr

Flatwork Drying Ironers. Chest Heated. Return Feed Type. ( Front Feed, Front Return. )

W

H


Front Feed-Front Return. Can be installed against a wall.

D

ELECTRICCONNECTION

MOIST AIREXHAUST

STEAM CONDENSATE

.




Roller &Padding.


Ironing Chest.





Gear Box &Chain Drive.





NET WT / CRATED WT

CRATED SIZE (WxDxH)

CRATED VOLUME

MODEL

0.56 KW

ROLLERDIA

(Padded)

ROLLER

LENGTH

ROLLER

SPEED

DRIVE

MOTOR

SUCTION

MOTORSTEAM



CONSUMPTION



W x D x H

380 3000

2 to 6

Mtrs / Min

(Variable)1.5 KW 20 Ø (0.75”BSP)

15 Ø (0.5”BSP) 3950 x 800

x 1230

1500 Kg / 1800 Kg

4250 x 1100 x 15307.15 M³

FRS 38-300

FRE 38-300

FRT 38-300

20 Ø (0.75”BSP)FRS 38-300 FRT 38-300

ELECTRIC

18 / 27 KW

FRE 38-300

50 Ltrs / hr75 Kg / hr 40000 KCal / hr

Flatwork Drying Ironer. Chest Heated. Return Feed Type. ( Front Feed, Front Return. )

Roller is driven by an electric motor coupledwith a reduction gear box unit. The final drive to the roller & Conveyor Feed belts isthrough sprockets & chain. Easy chaintensioning device. Silent drive. No speed loss of roller & conveyorfeed belts.

.


Single Motor workingin conjunction with Variable FrequencyDrive (VFD) provides precision & variable speeds for Roller Digital Temperature Control. Rocker switch for forward- reverse roller rotation. Auto cut for false feeding and finger safety guard. Operator’s safety& convenience.

Roller is fabricated in steel & is precision machined with drilled perforations. Runs on self aligning ball bearings with moisture exhaust. Gear driven. Padded with steel galvanized springs & heat resistant double layer polyester padding. Long roller & padding life.

Roller &Padding.

Fabricated in steel, precision machined, & polished. Slides at both ends through pneumatic cylinders. Perfect contact with the roller. Adjustable & uniform ironing pressure across the entire roll. Finest drying as well as Ironing of flat Linen.

Ironing Chest.


Polyester feed belts with welded seams. Both ends joined with detachable S.S. Combs. Run on coarse rubberized surface of the conveyor feed roller. The conveyor feed roller is chain driven. Easy chain & feed belts tensioning device. Easily replaceable feed belts. No slippage.




NET WT / CRATED WT

CRATED SIZE (WxDxH)

CRATED VOLUME

MODELROLLER

DIA(Padded)

ROLLER

LENGTH

ROLLER

SPEED

DRIVE

MOTOR

SUCTION

MOTORSTEAM



CONSUMPTION



W x D x HELECTRIC

0.75 KW530 3000 2.2 KW 25 Ø (1”BSP) 20 Ø (0.75”BSP)

Ø15 (0.5”BSP) 4220 x 1150

x 1300

FRS 53-300

FRE 53-300

FRT 53-300

FRS 53-300 FRT 53-300

36 KW

2450 Kg / 2750 Kg4520 x 1450 x 1600

10.48 M³

2 to 10

Mtrs / Min

(Variable)

FRE 53-300

100 Ltrs / hr100 Kg / hr 50000 Kcal / hr


Gear BoxDrive.

H

MOISTURE EXHAUST


Model FS, FE & FT 53-300

WD

ELECTRIC CONNECTION

Front Feed - Front Return. Can be installed against a wall.


Flatwork Drying Ironers. Chest Heated. Pass Through Type. ( Front Feed, Rear Return. )

Model FS-Steam Heated • FT-Thermic Fluid Heated


CRATED VOLUMEMODEL

NUMBEROF

ROLLS

ROLLERDIA

(Padded)

ROLLER

LENGTH

ROLLER

SPEED

MOTORS

DRIVE

HEATING

AIR CONNECTION

AIR CONSUMPTION

DIMENSIONSW x D x H

SUCTION

FS 53-300FT 53-300 530 3000

2 to 10Mtrs / Min(Variable)

2.2 KW

0.75 KW

2450 Kg / 2750 Kg4520 x 1450 x 1600

10.48 M³

15 Ø (0.5”BSP)

4220 x 1150

x 13001

STEAM CONNECTION


CONSUMPTION CONSUMPTION

25 FS 53-300

Ø (1”BSP)

100 Kg / Hr 20 (0.75”BSP)

50000 KCal / hrØ

FT 53-300

100 Ltrs / hr

H

MOISTURE EXHAUST

STEAM / THERMIC FLUID CONNECTION D

ELECTRIC CONNECTION

2000 2000

Recommended*

* *

Adaptable to Automatic FolderModel FS & FT 53-300

W



.


Single Motor workingin conjunction with Variable FrequencyDrive (VFD) provides precision & variable speeds for Roller Digital Temperature Control. Rocker switch for forward- reverse roller rotation. Auto cut for false feeding and finger safety guard. Operator’s safety& convenience.

Roller is fabricated in steel & is precision machined with drilled perforations. Runs on self aligning ball bearings with moisture exhaust. Gear driven. Padded with steel galvanized springs & heat resistant double layer polyester padding. Long roller & padding life.

Roller &Padding.

Fabricated in steel, precision machined, & polished. Slides at both ends through pneumatic cylinders. Perfect contact with the roller. Adjustable & uniform ironing pressure across the entire roll. Finest drying as well as Ironing of flat Linen.

Ironing Chest.


Polyester feed belts with welded seams. Both ends joined with detachable S.S. Combs. Run on coarse rubberized surface of the conveyor feed roller. The conveyor feed roller is chain driven. Easy chain & feed belts tensioning device. Easily replaceable feed belts. No slippage.

‘FS’ Range. Roller Ø 530

Roller is driven by an electric motor coupledwith a reduction gear box unit. The final drive to the roller & Conveyor Feed belts isthrough sprockets & chain. Easy chaintensioning device. Silent drive. No speed loss of roller & conveyorfeed belts.

Gear BoxDrive.


Flatwork Drying Ironers. Chest Heated. Pass Through Type. ( Front Feed, Rear Return. )

Gear BoxDrive.

.




Roller &Padding.


Ironing Chest.




H

W

MOISTURE EXHAUST


D

D

D

Adaptable to Automatic FolderModel FS & FT 83-330. 1, 2 & 3 Roll


Model FS-Steam Heated • FT-Thermic Fluid Heated


CRATED VOLUMEMODEL

NUMBEROF

ROLLS

13.75 KW

1.5 KW

4650 Kg / 5170 Kg

5150 x 2100 x 2000

21.63 M³

2

3

5.5 KW

1.5 KW

(2 Nos)

7.5 KW1.5 KW(3 Nos)

ROLLERDIA

(Padded)

ROLLER

LENGTH

ROLLER

SPEED

MOTORS

DRIVE

HEATING

AIR CONNECTION

AIR CONSUMPTION

DIMENSIONSW x D x H

830

830

830

3300

3300

3300




20 Ø (0.75”BSP)

25 Ø (1”BSP)

4850 x 1800

x 1700

4850 x 2900

x 1700

4850 x 4000

x 1700

8720 Kg / 9630 Kg5150 x 2100 x 2000 (1 No.)

21.63 M³ + 15.45 M³

12790 Kg / 14090 Kg

FS 83-330 x 2

FT 83-330 x 2

FS 83-330 x 3

FT 83-330 x 3

FS 83-330 x 1

FT 83-330 x 1

15 Ø (0.5”BSP)

SUCTION


25

STEAM CONNECTION


180 Kg / hr

38 Ø (1.5”BSP)360 Kg / hr

CONSUMPTION CONSUMPTION

FS 83-330

FS 83-330-2

50 Ø (2”BSP)540 Kg / hr

FS 83-330-3

50 Ø (2”BSP)270000 KCal / hr

38 Ø (1.5”BSP) 180000 KCal / hr

25 Ø (1”BSP)90000 KCal / hr

Ø (1”BSP)FT 83-330

FT 83-330-2

FT 83-330-3

200 Ltrs / hr

400 Ltrs / hr

800 Ltrs / hr

5150 x 1500 x 2000 (1 No.)

5150 x 2100 x 2000 (1 No.)

21.63 M³ + 15.45 M³ + 15.45 M³ 5150 x 1500 x 2000 (2 Nos.)

‘FS’ Range. Roller Ø 8301, 2 & 3 Roll


Micro Computer.

Programmed Computerprovides options of light shades, dark shades, gentle wash, strong wash, normal spin, high spin, short cycle & full cycle. Step by step LCD displayprovides cycle status &variable time signal. Easy to operate.

Inverter Drive.

Computer controlled single motor Variable Frequency Drive ( VFD ) gets all the speeds required for drycleaning, distribution, low, normal & high spin. The energy efficient drive reduces electric peak load demands.

Soft Mount. Tuned Suspension.

Dynamically tuned suspension with hydraulic cushions absorb even severe out-of-balance load vibrations. No special foundations required & the machine can be installed at any floor that can hold its dead weight.

2 Tanks, Twin Filters, Individual Pumps.

Separate tanks for light & dark shade solvent. Solenoid operated drains. Separate pumps inject the solvents into their respective filters for re-use. Intake of fresh solvent by pump. Simple filter system & operator’s convenience.

D

H

ELECTRICCONNECTION

W

MODEL


Ø 900 x 500

318 Ltrs

CYLINDER SIZE

Ø 1100 x 650

617 Ltrs

5.5 KW

DRIVEMOTOR

11 KW

CYLINDER SPEEDS

WASH FINAL EXTRACT

40 to 50RPM

35 to 45RPM

800 RPM

720 RPM

Ø 500

Ø 650

LOADINGDOOR

OPENING

DIMENSIONSW x D x H


CRATED VOLUME

1520 Kg / 1720 Kg1600 x 1700 x 2420

6.58 M³

2650 Kg / 2910 Kg1900 x 2000 x 2700

10.26 M³


DMX 15 15 Kg

Ø 720 x 380

154 Ltrs2.2 KW 45 to 55

RPM900 RPM Ø 400

950 Kg / 1080 Kg1350 x 1360 x 2280

4.1 M³

1050 x 1060 x 1980

1300 x 1400 x 2120

1600 x 1700 x 2400

VOLUME

DMX 30

DMX 60

30 Kg

60 Kg

BASETANK

1

BASETANK

2

75Ltrs

75Ltrs

125Ltrs

125Ltrs

200Ltrs

200Ltrs

FILTER 1Surface

Area

FILTER 2Surface

Area

PUMP 1

PUMP 2

0.37 KW

0.37 KW

0.37 KW

0.37 KW

0.37 KW

0.37 KW

8006cm²

8006cm²

10832cm²

10832cm²

13660cm²

13660cm²

Drycleaning Machine. High Spin, Soft Mount. Multi Solvent. Computer Controlled. Upto 80% Solvent Recovery. 15, 30 & 60 kg. Capacity.

CAPACITY

‘DMX’ Range


Firbimatic-Italy, Dry-to-Dry Perc Drycleaning Machines. Perchloroethylene Solvent. Computer Controlled. Upto 99.9% Solvent Recovery.8 kg. to 120 kg. Capacity.


Rear View. Vapour Induction Drying. Smart 10 Computer. PC Programmable.

1090 Kg / 1150 Kg1775 x 1640 x 2245

6.53 M³

MODELCYLINDER

SIZE DIMENSIONSW x D x H

NET WT / PACKED WTPACKED SIZE: WxDxH

CRATED VOLUMEVOLUME

10 Kg

15 Kg

Ø 700 x 505

Ø 800 x 560

Ø 1000 x 640

BASE TANKSDISTILL

CHAMBER

ECOFILTERVolumeSurface

DECOFILTERVolumeTubes

CONNECTION

FLOW RATE

75 Ltrs

100Ltrs

164Ltrs

260Ltrs

35 Ltrs

2.2 M²

75 Ltrs

5.5 M²

13 Ltrs

1 No

25 Ltrs

1 No

0.75” BSP

10 Ltrs/Min

0.75” BSP

15 Ltrs/Min

1575 x 1440 x 2045

1685 x 1505 x 2065

2080 x 1752x 2250

1220 Kg / 1300 Kg1885 x 1705 x 2265

7.27 M³

1980 Kg / 2080 Kg2280 x 1952 x 2450

10.9 M³

1 2 3

75 Ltrs

-

ELECTRIC POWER

STEAMHEATED

ELECTRICHEATED

4.5 KW 14 KW

WATER STEAMFor Steam

Heated Models

40 Kg/hrF 10 LT2

F 15 LT2105 Ltrs

105 Ltrs

- 35 Ltrs

2.2 M²13 Ltrs

1 No40 Kg/hr 4.5 KW 16 KW

9253 TANK

170 Ltrs

170 Ltrs

210 Ltrs 80 Kg/hr

0.75” BSP

30 Ltrs/Min

7.5 KW 22.5 KW25 Kg

Steam or Electric Heated

FIRBIMATIC MACHINES ARE AVAILABLE FROM 8 KG TO 120 KG CAPACITY & FOR USE WITH PERC OR HYDROCARBON SOLVENTS. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.

Dry WeightPer Charge

CAPACITY

Self diagnostic Smart10 microprocessor system with manual override.

Stainless steel Cylinder, condenser still, water- separator & air circuit.

Step by step L.E.D. Display for operation cycle & maintenance.

Closed circuit with heat pump.

Large capacity refrigeration system with automatic cool down.

Continuous as well as batch distillation.

Large rotating nylon filter.

Additional carbon filter.

Double air filter with large surface area.

Automatic dry control.

Option of 2 & 3 storage tanks.

Tank to tank automatic solvent transfer.

Drum exhaust fan with active carbon filter.

Built in air compressor.


Apparel Processing Machines with Low Spin Extract. Front Loading, Open Pocket. For Enzyme/Stone Washing, Dyeing & Speciality Washes.120, 240 & 360 kg. Capacity.

D

H

WSTEAM CONNECTION

WATER CONNECTION

AIR VENT

DRAIN

ELECTRIC CONNECTION

2750 for

PLS 360T

Model PLS-Steam Heated • T-Hydraulic Forward Tilt

THE LOADING ENZYME/STONE WASHING, DYEING & OTHER SPECIALITY WASHES, THE CAPACITY MAY REDUCE BY 50% OR MORE.CAPACITY IS FOR REGULAR SOAP WASH. FOR



Apparel Sampling Machine with Normal Spin Extract. 15 kg Capacity. PXS-Steam Heated • PXE-Electric Heated

Ø 720 x 380

154 Ltrs

15 to 50RPM

(Variable)

500RPM Ø 500

Ø20 (0.75” BSP)

200 Ltrs / cycleØ 75 Ø15 (0.5” BSP)

15 Kg / hr

PXS 15PXE 15

15 Kg640 Kg / 750 Kg

1250 x 1300 x 17802.89 M³

2.2 KW 950 x 1000

x 1480

6 / 12 KW

PXS 30 PXE 30

MODEL

Ø 1600 x 1250

2410 Ltrs

CYLINDER SIZE

Ø 1800 x1450

3687 Ltrs

WASH MOTOR

CYLINDER SPEEDS

WASH EXTRACT

120 RPM

100 RPM

Ø 1000

Ø 1000

LOADINGDOOR

OPENING

WATERCONNECTION

CONSUMPTION

Ø50 (2” BSP)

3200 Ltrs / cycle

Ø50 (2” BSP) 2 Nos.

4800 Ltrs / cycle

Ø 150

Ø 150

DRAIN

STEAM


Ø25 (1” BSP)

240 Kg / hr

Ø25 (1” BSP)

360 Kg / hr

DIMENSIONSW x D x H

NET WT / CRATED WTSHIPPING SIZE: WxDxH

SHIPPING VOLUME

Ø 1350 x 850

1216 Ltrs

15 to 50RPM

(Variable)

160RPM Ø 800

Ø50 (2” BSP)


Ø25 (1” BSP)

120 Kg / hr

VOLUME

PLS 120

PLS 240

PLS 360TForward Tilt

120 Kg

360 Kg

2850 Kg / 3290 Kg2100 x 2700 x 2450

4700 Kg / 5200 Kg2300 x 3150 x 2650

1560 Kg / 1810 Kg1850 x 2200 x 2300

19.1 M³

13.8 M³

9.36 M³5.5 KW

11 KW

18.5 KW

15 to 50RPM

(Variable)

15 to 50RPM

(Variable)

1550 x 1900 x 2000

1800 x 2400 x 2150

2000 x 2850 x 2350

AIR


Ø15 (0.5” BSP)

30 Ltrs / hr

Ø15 (0.5” BSP)

60 Ltrs / hr

Ø15 (0.5” BSP)

100 Ltrs / hr

dry wt. per

charge (1:10)

CAPACITY

Simple, Efficient Inverter Drive.Single motor inverter drive gets all precision speeds required for enzyme/stone washing, dyeing, turbo dyeing & other speciality washes. Low spin extract is affected by the same motor. The energy efficient drive reduces electric peak load demands.

Digital Time & Temperature Control.A digital timer runs the process for the preset time & gives flash light signal at the end of each cycle. Another digital timer controls the low spin extract time. Auto digital temperature control. Individual controls for cylinder speed, water, steam & drain valve. Easy to operate.

Sampling Machine with Normal Spin Extract.Front loading, open pocket. Single motor variable frequency drive. Precision speeds for special washes & turbo dyeing. Stainless steel front, outer drum & inner cylinder. Solenoid operated water & steam valves. Motorized drain valve. Auto timed & digital temperature control. Does not require separate Hydro Extractor.

Self Unloading on 360 kg Machine.Hydraulic forward tilt on 360kg machine drops the entire load into a trolley in less than 30 seconds. Optional : 5 tankautomatic dozing. One operator can handle up to 4 machines. Huge savings on time & labor.

240 Kg

‘PL’ Range


Simple, Efficient Inverter Drive.Single motor inverter drive gets all precision speeds required for enzyme/stone washing, dyeing, turbo dyeing & other speciality washes. Low spin extract is affected by the same motor. The energy efficient drive reduces electric peak load demands.

Digital Time & Temperature Control.A digital timer runs the process for the preset time & gives flash light signal at the end of each cycle. Another digital timer controls the low spin extract time. Auto digital temperature control. Individual controls for cylinder speed, water, steam & drain valve. Easy to operate.

Apparel Processing Machines with Resin Spray Attachment & Low Spin Extract. Front Loading, Open Pocket. For Wrinkle-free spray treatment,

D

2750 for

PLS360TH

W STEAM CONNECTION

WATER CONNECTION

AIR VENT

ELECTRICCONNECTION

Model PRS - Steam Heated T - Hydraulic Forward Tilt

THE LOADING CAPACITY IS FOR REGULAR SOAP WASH. FOR RESIN SPRAY, ENZYME / STONE WASHING, DYEING & OTHER SPECIALITY WASHES, THE CAPACITY MAY REDUCE BY 50% OR MORE.

CONSUMPTION & ELECTRIC LOAD ARE PRIMARILY FOR THE PURPOSE OF DESIGNING UTILITIES ONLY.


Ø 720 x 380

154 Ltrs

15 to 50RPM

(Variable)

500RPM Ø 500

Ø20 (0.75” BSP)


PXRS 15

PXRE 1515 Kg

760 Kg / 870 Kg1250 x 1300 x 1780 (1 No.)

2.89 M³ + 1.07 M³

2.2 KW 950 x 1000

x 1480

Apparel Sampling Machine with Normal Spin Extract. 15 kg Capacity. PXS - Steam Heated PXE - Electric Heated

Ø15 (0.5” BSP)

15 Kg / hr

PXRS 30

6 / 12 KW

MODEL

Ø 1600 x 1250

2410 Ltrs

CYLINDER SIZE

Ø 1800 x1450

3687 Ltrs

WASH MOTOR

CYLINDER SPEEDS

WASH EXTRACT

120 RPM

100 RPM

Ø 1000

Ø 1000

LOADINGDOOR

OPENING

WATERCONNECTION

CONSUMPTION

Ø50 (2” BSP)

2400 Ltrs / cycle

Ø50 (2” BSP) 2 Nos.

3600 Ltrs / cycle

Ø 150

Ø 150

DRAINSTEAM

CONNECTION

CONSUMPTION

Ø25 (1” BSP)

240 Kg / hr

Ø25 (1” BSP)

360 Kg / hr

DIMENSIONSW x D x H


CRATED VOLUME

Ø 1350 x 850

1216 Ltrs

15 to 50RPM

(Variable)

160RPM Ø 800

Ø50 (2” BSP)

1200 Ltrs / cycleØ 100 Ø25 (1” BSP)

120 Kg / hr

VOLUME

PRS 120

PRS 240

PRS 360T

240 Kg

120 Kg

360 Kg

3150 Kg / 3590 Kg2100 x 2700 x 2450 (1 No.)

5100 Kg / 5600 Kg2300 x 3150 x 2650 (1 No.)

1880 Kg / 2110 Kg1850 x 2200 x 2300 (1 No.)

19.1M³ + 1.68 M³

13.8M³ + 1.68 M³

9.36 M³ + 1.68 M³5.5 KW

11 KW

18.5 KW

15 to 50RPM

(Variable)

15 to 50RPM

(Variable)

1550 x 1900 x 2000

1800 x 2400 x 2150

2000 x 2850 x 2350

AIRCONNECTION

CONSUMPTION

Ø15 (0.5” BSP)

30 Ltrs / hr

Ø15 (0.5” BSP)

60 Ltrs / hr

Ø15 (0.5” BSP)

100 Ltrs / hr

PXRE 30

800 x 1400 x 1500 (1 No.)

800 x 1400 x 1500 (1 No.)

800 x 1400 x 1500 (1 No.)

750 x 1100 x 1300 (1 No.)

Enzyme/Stone Washing, Dyeing & Speciality Washes. 120, 240 & 360 kg. Capacity.

Resin Mist Spray.High pressure 7 nozzles manifold atomize the resininto a mist sprayfor uniform absorption.

Tremendous savings on resin costs.

Self Unloading.Hydraulic forwardtilt drops the load in less than 30 sec. Optional : Computerized high spin.

Savings on time & labor.

‘PR’ Range

dry wt. per

charge (1:10)

CAPACITY


Stainless Steel Polished Head.

Curved pressing surface is steam jacketed & is spring suspended on rocker arms for self aligning with buck. Pneumatic raising & lowering with jumbo push buttons at the front work table. Buck is padded with heat resistant silicon/molleton padding. Perfect alignment. Fine pressing. Operator’s safety & convenience.

Digital Timed Release.

Head is released automatically by a digital timer which can be preset from 2 to 180 seconds. Automatically resetsto preset time for repeat operations. Head can be released by pressing red jumbo push button at any time before the preset time. Safe drying & fine pressing of all types of cotton garments.

Rocker Arms, Air Cylinder & Springs.

Rocker arms fitted to the head, move on ball bearings. Head & rocker arms are counter balanced at the back by springs. A pneumatic cylinder with solenoid operated air control valves affect raising & lowering of head. Smooth operation of Rocker Arms & Head.

General Utility Laundry Press.

Pneumatically Operated.S.S Polished Head.Padded Buck. Auto Timed Release.

1200R

H

1900

D

300480

1400

W

MODEL STEAMCONNECTION

STEAMCONSUMPTION

AIR CONSUMPTION

1450 x 1250 x 1280

CRATED SIZE: WxDxHCRATED VOLUME

LGS 140Ø15 (0.5” BSP)

at 6Kg / cm²

30Kg / hr 80 Ltrs/Minute

4.28 M³

AIR CONNECTION

NET WEIGHT

CRATED WEIGHT

480 Kg 580 Kg

DIMENSIONSW x D x H

Ø15 (0.5” BSP) at 6Kg / cm²

1750 x 1550 x 1580



Model : LGS 140



Curved pressing surface is steam jacketed & is spring suspended on rocker arms for self aligning with buck. Pneumatic raising & lowering with jumbo push buttons at the front work table. Buck is padded with heat resistant silicon/molleton padding. Perfect alignment. Fine pressing.Operator’s safety & convenience.


Head is released automatically by a digital timer which can be preset from 2 to 180 seconds. Automatically resets to preset time for repeat operations. Head can be released by pressing red jumbo push button at any time before the preset time. Safe drying & fine pressing of all types of cotton garments.



Twin Topper Laundry Press.

W

1200R

900

350

H

1900

D


STEAMCONSUMPTION

AIR CONSUMPTION

1250 x 1250 x 1280


LGS 90 Ø15 (0.5” BSP)at 6Kg / cm²


1550 x 1550 x 1580 3.79 M³

AIR CONNECTION

NET WEIGHT

CRATED WEIGHT

440 Kg 540 Kg

DIMENSIONSW x D x H

Ø15 (0.5” BSP) at 6Kg / cm²




Model : LGS 90

200


Steaming Head &Steaming Buck.

Curved pressing surface is steam jacketed, perforated &is lined with heat resistant fabriccover. Head is spring suspended on rocker arms for self aligning with buck. Pneumatic raising & lowering with jumbo push buttons at the front. Buck is padded with heat resistant silicon/molleton padding. Perfect alignment & fine pressing.


Automatic sequential digital timers can be preset for head steam, buck steam, vacuum & head release besides foot operated switches. Head can be released by pressing red jumbo push button at any time before the preset time. Safe drying & fine pressing of all types of garments.


Rocker arms fitted to the head, move on ball bearings. Head & rocker arms are counter balanced at the back by springs. Apneumatic cylinder with solenoid operated air control valves affect raising & lowering of head.Smooth operation of Rocker Arms & Head.

General Utility Drycleaning Press.

Centrifugal Suction Blower.

Coupled with Bed through a flexible duct. Mounted on a high torque electric motor for quick start. Automatic start at the time of pressing & stop at the time of release. Keeps padding dry at all times. Efficient moisture suction. Quick drying of buck.

250

1200

5001200R

H

1900

DW


STEAMCONSUMPTION

AIR CONSUMPTION

1450 x 1250 x 1280


GUS 120Ø15 (0.5” BSP)

at 6Kg / cm²


4.28 M³

AIR CONNECTION

NET WEIGHT

CRATED WEIGHT

460 Kg

DIMENSIONSW x D x H

Ø15 (0.5” BSP) at 6Kg / cm²

560 Kg

1750 x 1550 x 1580

VACUUMBLOWER

0.75 KW



Pneumatically Operated.Steaming Head & Steaming Buck.Built in Centrifugal Vacuum. Foot Switches.Sequential Timers.

Model : GUS 120


Steaming Head &Steaming Buck.

Curved pressing surface is steam jacketed, perforated &is lined with heat resistant fabriccover. Head is spring suspended on rocker arms for self aligning with buck. Pneumatic raising & lowering with jumbo push buttons at the front. Buck is padded with heat resistant silicon/molleton padding. Perfect alignment & fine pressing.


Automatic sequential digital timers can be preset for head steam, buck steam, vacuum & head release besides foot operated switches. Head can be released by pressing red jumbo push button at any time before the preset time. Safe drying & fine pressing of all types of garments.


Rocker arms fitted to the head, move on ball bearings. Head & rocker arms are counter balanced at the back by springs. Apneumatic cylinder with solenoid operated air control valves affect raising & lowering of head.Smooth operation of Rocker Arms & Head.

Twin Topper Drycleaning Press.


Coupled with Bed through a flexible duct. Mounted on a high torque electric motor for quick start. Automatic start at the time of pressing & stop at the time of release. Keeps padding dry at all times. Efficient moisture suction. Quick drying of buck.

1200R

900

350

H

1900

DW

MODELSTEAM

CONNECTIONSTEAM

CONSUMPTIONAIR

CONSUMPTION

1150 x 1250 x 1280


GUS 90Ø15 (0.5” BSP)

at 6Kg / cm²


3.55 M³

AIR CONNECTION

NET WEIGHT CRATED WEIGHT

430 Kg

DIMENSIONSW x D x H

Ø15 (0.5” BSP) at 6Kg/cm²

530 Kg

1450 x 1550 x 1580

VACUUMBLOWER

0.75 KW



Pneumatically Operated.Steaming Head & Steaming Buck.Built in Centrifugal Vacuum. Push Button Operation. Foot Switches.Sequential Timers.Steam Heated.

Model : GUS 90

200


Flat Bed Drying Press.

Digital Time & Temperature. Automatic release of head at preset time. Auto reset for next operation.Digital temperature controller for electric thermic fluid heated

Centrifugal Suction Blower.Connected with Bed. Mounted on a high torque electric motor for quick start. Auto start at the time of pressing & stop at the time of release.

Rocker Arms, Air Cylinder.Rocker arms move on ball bearings. Front head weight is counter balanced by springs. A pneumatic cylinder is activated by jumbo push buttons

1500

W

H


Model FPS-Steam Heated • FPE-Electric Thermic Fluid Heated • FPT-Thermic Fluid Heated.

at the front affect raising & lowering of head. Smooth operation of rocker arms & head.

Keeps padding dry at all times. Efficient moisture suction. Quick drying time.

model. Safe drying & fine pressing of flat linen or garments.

D

1900

750

Pneumatically Operated. Buck with Moisture Suction. Auto Timed Release. Head Size : 1500 x 750

MOIST AIREXHAUST

THE ABOVE MODEL SHALL TAKE LINEN STRAIGHT FROM WASHER EXTRACTOR & DRY & PRESS SIMULTANEOUSLY. CONSUMPTION & ELECTRIC LOAD ARE FOR THE PURPOSE OF DESIGNING UTILITIES.

FPS 150

MODEL

FPE 150

HEAD &BED SIZE

1500 x 750

STEAM CONNECTION

CONSUMPTION

ELECTRICTHERMIC FLUID CONNECTION

CONSUMPTION

DIMENSIONSW x D x H

NET WT / CRATED WTCRATED SIZE: W x D x H

CRATED VOLUME

FPT 150

FPE 15012 / 18 KW

1600 x 1500 x 1280

580 Kg / 790 Kg1900 x 1800 x 1580

5.4 M³

HEATING

FPT 1500.5” x 0.5” BSP16000 KCal / hr

AIR

CONNECTION

Ø15 (0.5” BSP)

100 Ltrs / Minute

6 Kg / cm²

AIR CONSUMPTION

AIR PRESSURE

‘FP’ Range


FPS 150 15 Ø (0.5” BSP)

30 Kg / hr

Shirt Cuff & Collar Press.


Curved pressing surface is steam jacketed & is spring suspended onrocker arms for self aligning with buck. Pneumatic raising & lowering with jumbo push buttons at the front work table. Buck is padded with heat resistant silicon/molleton padding. Perfect alignment. Fine pressing. Operator’s safety & convenience.


Head is released automatically by a digital timer which can be preset from 2 to 180 seconds. Automatically resets to preset time for repeat operations. Head can be released by pressing red jumbo push button at any time before the preset time. Safe drying & fine pressing of all types of cotton garments.



W

170

450200 200

H

1900

D


STEAMCONSUMPTION

AIR CONSUMPTION

950 x 1250 x 1280


CFS 90Ø15 (0.5” BSP)

at 6Kg /cm²


1250 x 1550 x 1580

3.06 M³

AIR CONNECTION

NET WEIGHT

CRATED WEIGHT

470 Kg

570 Kg

DIMENSIONSW x D x H


ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz,AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.



Model : CFS 90


Shirt Body & Sleeve Finisher. Cocchi, Italy.

Mobile Front & Back Pad.

Mobile front & back pads, actuated pneumatically, hold the garment firmly on to the mannequin. Adjustable pneumatic clamps hold the sleeves & keep the garment in upright position. The pads & clamps release the garment automatically at the end of each cycle. Accurate positioning results fine finishing.

Digital Sequential Timers.

3 nos. sequential timers activate live steam, steam hot air combination & super heated steam respectively. Each timer can be precisely set. Timers reset automatically for repeat operations. 3 nos. foot switches can override the timers for manual operation. Efficient steaming & fine hot air finishing.

Powerful Blower.

Connected to mannequin. Mounted on a high torque electric motor for quick start. Fitted with air flow control damper. Activated by sequential digital timer & foot switch. Maintains uniform flow of steam-air combination & hot air. Low noise & vibration less performance.

W D

MODELSTEAM

CONNECTIONSTEAM

CONSUMPTIONAIR

CONSUMPTION

2100 x 1800 x 2050


Ø15 (0.5” BSP)at 6 Kg/cm²

30 Kg / hr 80 Ltrs/Minute

3.75 M³

AIR CONNECTION

NET WEIGHT

CRATED WEIGHT

350 Kg 460 Kg

DIMENSIONSW x D x H

Ø15 (0.5” BSP) at 6 Kg/cm²

BLOWER MOTOR

0.75 KW1080 x 1480 x 2350



Pneumatically Operated.Mobile Front & Back Pad Application.Pneumatic Clamps.Sequential Timers.Foot Switches.

Model : CG-B EasyMAK III

H

CG-B EasyMAK III


Knitwear Upsteam Finishing Press with Fabric Head Frame.

Foot Pedals for Upsteam & Suction.

Separate foot pedals for steam release & to activate suction through pneumatically operated steam/suction manifold. Conveniently located, spring loaded foot pedals release both hands of the operator to finish the garment in its proper shape with ease. Operator’s convenience.

Pneumatically OperatedSteam / Suction Manifold.


Connected to slanting table top. Mounted on ahigh torque electric motor for quick start. Activated by spring loaded foot pedals. Low noise & vibration less performance. Efficient moisture suction. Quick drying of table top& padding.

Silicon / Molleton Padding.

Perforated aluminum topwith reinforced steam jacket underneath. The top padding consist of layers of aluminum wire-mesh, silicon/molleton foam & heat resistant top cover. High porosity. Uniform distribution of upsteam. Quick suction.

Air actuated 2 way manifoldreleases upsteam or activates suction at the command of their respective foot pedals. Stainlesssteel construction, teflon seating,& high temperature resistant pneumatic cylinder make the manifold trouble free for continuous repeat operations. Reliable throughout its life time.

W D

2000

MODELVACUUMBLOWER

BLOWERCAPACITY

AIR CONNECTION

CONSUMPTION

KG 2001900 Ltrs / Sec

(850 CFM)

STEAM CONNECTION

CONSUMPTION

DIMENSIONSW x D x HBED SIZE

2000 x 1000 0.75 KWØ 15 (0.5” BSP)

40 Kg / hr

Ø 15 (0.5” BSP)

15 Ltrs / Min2170 x 1320 x 1050

NET WT / CRATED WTCRATED SIZE : W x D x H

SHIPPING VOLUME

560 Kg / 690 Kg2470 x 1620 x 1350

5.4 M³



Large Slanting Table Top. Quick Steam Distribution.Powerful Suction.Bed Size : 2000 x 1000

Model : KG 200

H


Dress Form Finisher.

Mobile Front Pad.

Mobile front pad, actuated pneumatically, hold the garment firmly on to the mannequin. Adjustable pneumatic clamps hold the sleeves & keep the garment in upright position. The front pad & sleeve clamps release the garment automatically at the end of each cycle. Accurate positioning results fine finishing.


3 nos. sequential timers activate live steam, steam hot air combination &super heated steam respectively. Each timer can be precisely set. Timers reset automatically for repeat operations. 3 nos. foot switches can override the timers for manual operation. Efficient steaming & fine hot air finishing.

Powerful Centrifugal Blower.

Connected to mannequin. Mounted on a high torque electric motor for quick start. Fitted with air flow control damper. Activated by sequential digital timer & foot switch. Maintains uniform flow of steam-air combination & hot air. Low noise & vibration less performance.

W D


STEAMCONSUMPTION

AIR CONSUMPTION


AIR CONNECTION


DIMENSIONSW x D x H

BLOWER MOTOR

2100 x 1800 x 1600SIF 500 20 Kg / hr 80 Ltrs/Minute

3.59 M³

350 Kg

460 Kg

Ø15 (0.5” BSP) at 6 Kg/cm²

0.75 KW1050 x 1800 x 1900Ø15 (0.5” BSP)

at 6 Kg/cm²



Pneumatically Operated.Mobile Front Pad Application.Pneumatic Clamps.Sequential Timers.Foot Switches.

Model : SIF 500

H


Trouser Form Finisher.

Mobile Waist Band.

Mobile waist band & front clamp, actuated pneumatically, hold the trouser firmly. Pneumatic clamps with self adjusting height hold the bottoms firmly & keep the trouserin upright position. The waist band & bottom clamps release the trouser automatically at the end of each cycle. Accurate positioning results fine finishing.


3 nos. sequential timers activate live steam, steam hot air combination & super heated steam respectively. Each timer can be precisely set. Timers reset automatically for repeat operations. 3 nos. foot switches can override the timers for manual operation. Efficient steaming & fine hot air finishing.

Powerful Centrifugal Blower.

Connected to waist band duct. Mounted on a high torque electric motor for quick start. Fitted with air flow control damper. Activated by sequential digital timer or foot switch. Maintains uniform flow of steam-air combination & hot air. Low noise & vibration less performance.

W

H

D

MODELSTEAM

CONNECTIONSTEAM

CONSUMPTIONAIR

CONSUMPTIONCRATED SIZE: WxDxH

CRATED VOLUMEAIR

CONNECTION

NET WEIGHT

CRATED WEIGHT DIMENSIONS

W x D x HBLOWER MOTOR

750 x 1100 x 1950STP 500Ø15 (0.5” BSP)

at 6Kg/cm²


3.30 M³

350 Kg 460 Kg


0.75 KW1050 x 1400 x 2250



Pneumatically Operated.Self Adjusting Waist Clamp.Self Adjusting Leg Length.Sequential Timers.Foot Switches.

Model : STP 500


Vacuum Finishing Table.

Silicon Padding.S.S. Table Heater.

Perforated top has thermostatically controlled electric heating elementunderneath. On the top, layers of aluminum wiremesh, silicon foam & heat resistant top cover form high porosity padding. Efficient airflow. Padding remains dry at all times.


Connected to table top. Mounted on a high torque electric motor for quick start. Activated by spring loaded, full length foot pedal. Low noise & vibration less performance. Efficient moisture suction. Quick drying of table top & padding.

Extended Exhaust Duct.Flourescent Tube light.

Moist air is exhausted upwards with extended duct. Garment shelf with concealed flourescent tube light is mounted on to the duct at a height so that the table top is uniformly illuminated & the garment shelf can be conveniently used. Clean environment. Operator’s convenience.

W D

H

SLEEVE BUCK MODEL SL 800

800

120

60

800

200

350

UTILITY BUCK MODEL UT 800

ATTACHMENTS

MODEL TABLE TOP SIZE SUCTION MOTOR OVERALL DIMENSIONS W x D x H NET WT CRATED WT CRATED SIZE W x D x H CRATED VOLUME

VF 120

VF 150

1200 x 750

1500 x 900

0.37 KW

0.75 KW

1230 x 890 x 1850

1550 x 1040 x 1850

165 Kg

190 Kg

220 Kg

265 Kg

1430 x 1090 x 1300

1750 x 1240 x 1300

2.02 M³

2.82 M³


Rectangular Table Top.Extended Exhaust Duct withRack & tube light.

Model : VF 120Model : VF 150


Silicon Padding.S.S. Table Heater.

Perforated top has thermostatically controlled electric heating elementunderneath. On the top, layers of aluminum wire mesh, silicon foam & heat resistant top cover form high porosity padding. Efficient airflow. Padding remains dry at all times.


Connected to dress board. Mounted on a high torque electric motor for quick start. Activated by spring loaded, full length foot pedal. Low noise & vibration less performance. Efficient moisture suction. Quick drying of dress board top & padding.

Extended Exhaust Duct.Both Side Operation.

Moist air is exhausted upwards with an extended duct. Pressing top is Ideal for dresses including the one that are narrow from the waist & broader at the bottom. Foot pedals at both sides & extended swivelling type iron rest felicitates ironingfrom both sides of the dress board. Clean environment. Operator’s convenience.

W

H

D

1400

200 550

MODEL

VT 140

TABLE TOP SIZE

1400 x 550 x 200

SUCTION MOTOROVERALL DIMENSIONS

W x D x H NET WT CRATED WT CRATED SIZE W x D x H CRATED VOLUME

0.37 KW 1800 x 560 x 1850 170 Kg 225 Kg 1800 x 850 x 1300 1.98 M³


General Utility Table Top.Extended Exhaust Duct.Dual Foot Pedals.

Vacuum Dress Finishing Board. Model : VT 140


SB 20 with SE 4

Steam Irons & Accessories.

Electric Steam Iron All Steam Iron

Teflon Shoes

Hard Anodized die cast sole plate with 24 nos built in moisture traps. Rubberized handle with concealed soft micro switch.Thermostatically controlled die cast heating element. Complete with steam hose & electric cable.

Stainless Steel steam chamber & perforated stainless steel sole plate. No electric heating element. Steam heated. External thumb pressed steam release lever. Efficient continuous moisture removal. Complete with steam hose.

High Quality thick Teflon sheet heat sealed with aluminum plate, densely perforated. Aluminum armored, Spring loaded, perfect fit with sole plate. Anti shine & scorch free ironing.

200

120

210

125

Multi Table Installation Kit

Free Standing base frame & vertical columns. Interconnecting insulated steam lines with valves & flanged ends. Large capacity moisture trap at the end. Concealed cabling through steel conduits with DP switch. Quick & Neat Installation.

With steam solenoid valve & regulator. Inner shell in stainless steel duly insulated. Complete with metallic breaded insulated teflon hose for steam inlet & steam return with valve, interconnecting cable, switches & mounting stand.

MODEL

ES 20

WEIGHT WATTS

VOLTAGE

1.9 Kg900

220 Volts, AC250 x 150 x 160

PACKED SIZEPACKED WEIGHT

2.2 Kg

MODEL

AS 21

WEIGHT STEAM INLET

1.5 Kg

STEAM PRESSURE

230 x 150 x 150


1.9 Kg

Ø 6(0.25” BSP)

3 to 5 Kg/cm²

STEAM

INLET

2 to 5 Kg/cm²

MODEL

TF 20

WEIGHTSOLETHICKNESS

0.1 Kg 230 x 140 x 20

PACKED WEIGHT

0.15 Kg

PACKED SIZE

3 mm

MODEL

SB 20

WEIGHT WATTSVOLTAGE

1.2 Kg900

220 Volts, AC450 x 150 x 125


1.5 Kg

Ø 6 (0.25” BSP)

STEAM INLET

2 to 5 Kg/cm²Ø 6 (0.25” BSP)

MODEL

CS 3

WEIGHTELECTRIC POWER

4.5 Kg220 Volts, AC500 x 200 x 170


5.5 Kg

STEAM INLET / DRAIN

2 to 5 Kg/cm²Ø 6 (0.25” BSP)

MODEL

IK 130

ELECTRICPOWER

1500 x 250 x 250

PACKED SIZE / KITPACKED WEIGHT / KIT

20 Kg

MAINSTEAM INLET

6 to 7 Kg/cm²Ø 15 (0.5” BSP)

STEAMOUTLETS

Steam Brush

Directly finishes on a hanger or a mannequin. Heat proof handle with push button for steam release. Easy to use. Imparts fine finish.

An Ideal Device to finish high fashion difficult to iron garments.

Ø 15 (0.25” BSP) 220 Volts, AC

ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL DIMENSIONS ARE IN MM. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.



Electric Steam Iron, All Steam Iron, Teflon Shoes, Steam Brush,Condensate Separator & Installation Kit.

Model : ES 20 Model : AS 21

Model : TF 20 Model : SB 20

Model : CS 3 Model : IK 130Condensate Separator


Pressure operated diaphragm type switch cuts power supply to heating elements when a preset higher pressure is achieved & similarly, resumes supply at a preset lower pressure. Accurate pressure differential to maintain steady steam supply. Fail safe, repeat operations.

Stainless steel float ball working in conjunction with industrial type micro switches for low / high water level regulation prevents dry running of heating elements & at the same time prevents over filling of pressure vessel. Fail safe dry cut out. Easy to dismantle & refit.

S.S. 304 quality sheathing, porcelain insulation & thick flange to with stand high pressure in the stainless steel pressure vessel. The configuration of electric load can be modified from1 phase to 3 phase & vice-versa. Easy to dismantle & refit.

Steam Generator. Electric, Portable & Automatic.

For steam supply

of 4 kg/hr at 3 kg/cm².

Suitable for 1 Steam Iron

or equivalent.

Float Type Water Level Controller.

PressureControl Switch.

Stainless Steel Heating Element.

Stainless Steel Pressure Vessel. Audio/Video Signal for Low Water Level. Steam Solenoid Valve with Flow Control Knob.

H

W D

MODEL STEAM PRESSURE

STEAMCAPACITY

350 x 400 x 800


SE 4 3Kg / cm²4Kg / hr

0.22M³


70 Kg 90 Kg

DIMENSIONSW x D x H

450 x 500 x 1000

PRESSUREVESSEL

12 Ltrs

ELECTRICHEATERS

2 / 3 Kw


Model : SE 4


Steam Generator. Electric, Portable & Fully Automatic.

Pressure operated diaphragmtype switch cuts power supply to heating elements when a preset higher pressure is achieved & similarly, resumes supply at a preset lower pressure. Accurate pressure differential to maintain steady steam supply. Fail safe, repeatoperations.

Stainless steel float ball working in conjunction withindustrial type micro switchesfor low / high water level regulation prevents dry running of heating elements &at the same time prevents overfilling of pressure vessel.Fail safe dry cut out.Easy to dismantle & refit.

S.S. 304 quality sheathing,porcelain insulation & thick flange to with stand high pressure in the stainless steel pressure vessel. Theconfiguration of electric load can be modified from 1 phase to 3 phase & vice-versa. Easy to dismantle & refit.




Stainless Steel Pressure Vessel. Built in Water Storage Tank. Audio/Video Signal for Low Water Level. Steam Solenoid Valves with Flow Control Knobs.

For steam supply


Suitable for 2 Steam Irons or equivalent.

Motorized Water Feed Pump.

A mono block type high pressure Peripheralpump automatically injects water into the pressure vessel as & when signaled by the water level regulator.The peripheral impeller eliminates any back pressure.Fail safe, positive water feed each time.

H

W D

WATERSTORAGETANK

MODELSTEAM

PRESSURESTEAM

CAPACITY

350 x 600 x 1000


SE 8 4 Kg / cm²8Kg / hr

0.37M³


110 Kg 140 Kg

DIMENSIONSW x D x H

450 x 700 x 1200

PRESSUREVESSEL

12 Ltrs

ELECTRICHEATERS

2 / 4 / 6 Kw

WATER FEED PUMP

0.7 KW


Model : SE 8



Stainless steel float ball working in conjunction withindustrial type micro switchesfor low / high water level regulation prevents dry running of heating elements & at the same time prevents overfilling of pressure vessel.Fail safe dry cut out.Easy to dismantle & refit.

S.S. 304 quality sheathing,porcelain insulation & thick flange to with stand high pressure in the carbon steel pressure vessel. Choice of 12,18 & 36 Kw with independent rockerswitches mounted with thefront control panel. Easy to dismantle & refit.

Steam Generator. Electric & Fully Automatic.




A belt driven, high pressurepiston type pump automaticallyinjects water into the pressure vessel as & when signaled by the water level regulator.The dual pistons with built itnon return device eliminates any back pressure. Fail safe, positive water feed each time.

For steam supply


Suitable for 10 Steam Irons or

equivalent.

Motorized PistonWater Feed Pump.

H

W

STEAM OUTLET(On both sides)

D

WATER INLET

WATER STORAGETANK

MODEL STEAM PRESSURE

STEAMCAPACITY

800 x 650 x 1120


SE 40 6 Kg / cm²40 Kg / hr

1.48 M³

NET WEIGHT

CRATED WEIGHT

230 Kg 290 Kg

DIMENSIONSW x D x H

1100 x 950 x 1420

PRESSUREVESSEL

20 Ltrs

ELECTRICHEATERS

12 / 24 / 36 KW

WATER FEED PUMP

1.5 KW


Carbon Steel Pressure Vessel. Built in Water Storage Tank.Audio/Vedio Signal for Low Water Level.

Model : SE 40



Stainless steel float ball working in conjunction withindustrial type micro switchesfor low / high water level regulation prevents running of burner & at the same time prevents over filling of pressure vessel.Fail safe dry cut out.Easy to dismantle & refit.

A vertically mounted, motorized burner fires fuel-air combination intoa 3-pass design, storagetype pressure vessel.Pressure of the fire flame & design of the vessel is such that maximum heatis used. High on economy,low on maintenance.

Steam Generator. Diesel/Gas Fired. Fully Automatic.



A belt driven, high pressurepiston type pump automaticallyinjects water into the pressure vessel as & when signaled by the water level regulator.The dual pistons with built itnon return device eliminates any back pressure. Fail safe, positive water feed each time.

Motorized PistonWater Feed Pump.

For steam supply


Suitable for 14 Steam Irons or

equivalent.

Diesel/Gas fired Burner.

FLUE GASEXHAUST

STEAM OUTLET

(On both sides)

H

W D

WATER INLET

WATER STORAGETANK

MODELSTEAM

PRESSURESTEAM

CAPACITY

750 x 880 x 1780


SD 60SG 60

6 Kg / cm²60 Kg / hr

2.57 M³


390 Kg 480 Kg

DIMENSIONSW x D x H

1050 x 1180 x 2080

PRESSUREVESSEL

20 Ltrs

HEATING WATER FEED PUMP

1.5 KW

DIESEL GAS

SD 603 Ltr / hr

SG 603 Kg / hr

Model SD-Diesel Fired SG-Gas Fired


Carbon Steel Pressure Vessel. Built in Water Storage Tank.Audio/Vedio Signal for Low Water Level.

Model : SD 60Model : SG 60


Powerful Centrifugal Suction Blower.

Thread Blowing Machine.

W

MODELBLOWER MOTOR

EXHAUSTDUCT SIZE

690 x 1400 x 1650


TBM 2000 3.75 KW 300 x 300 3.29 M³


320 Kg

DIMENSIONSW x D x H

425 Kg

990 x 1700 x 1950

ALL DIMENSIONS ARE IN MM. STANDARD MACHINES OPERATE ON 415V ±5%, 3 PHASE, 50Hz AC ELECTRIC SUPPLY. SPECIFICATIONS MENTIONED ABOVE ARE SUBJECT TO CHANGE WITHOUT NOTICE.

GARMENT DUCT OPENING

600 x 180

Connected to garment trough through a duct. Belt driven by a high torque electric motor for quick start. Fitted with air flow control damper. Activated by foot switch. Maintains powerful flow of air to blow away loose threads & dust. Vibration less performance.

GARMENT DUCTLENGTH

1150

Adjustable Foot Pedal.

A full length, spring loaded foot pedal working in conjunction with sturdy micro switch instantly activates the suction blower when press down & stops the suction when released. Can be extended or receded accordingto operator’s reach. Operator’s comfort & convenience.

All Metal Body. Acrylic see-through Garment Trough. Adjustable Air Flow. Built-in Garment Trap.

Model : TBM 2000

D

H

GARMENT TRAP

EXHAUST


Stain Removing Machine.

Metal forged single piece spotting guns for high pressure “Air-chemical” combination jet spray. Spring suspended foreasy use & quick retraction. Replaceable nozzles. Single lever operation with built in air-chemical flow control. Long rust free life.

Stainless SteelSpotting Guns.

Stainless Steel Work Station.

Stainless steel tapered basin with fine meshnose. Narrow, swivelling type sleeve arm. Connected to powerful suction blower. Ecological suction, concealed tube light, chemical rack & underneath spill rack are integrally formed. Long rust free life. Operator’s convenience .


Connected to S.S basin. Mounted on a high torque electric motor for quick start. Activated by spring loaded, full length foot pedal. Low noise & vibration less performance. Quick chemical suction. Keeps working area odour free. Hygienic for operator.

Steam-Air Combination Gun.

For hot spotting. Heatproof plastic cover with built in micro switches for steam, air & steam-air combination. Stainless steel nozzle. Built in manifold for steam & air.Connected to compressed air & condensate separator. Easy to use. Dry steamat all times.

W D

H

MODELSLEEVE

ARMSIZE

1360 x 600 x 1740SP 120 390 x 105 x 65 2.16 M³

OVERALLDIMENSIONS

W x D x H

170 Kg / 260 Kg1660 x 900 x 1450

MAINWORK STATION

SIZE

1200 x 340 x 140 Ø 15 (0.5” BSP)150 Ltrs / Min

Ø 6 (0.25” BSP)4 Kg / hr

OPTIONALBUILT IN COMPRESSOR

MOTOR & BLOCK TANK CAP.

1.5 KW(2 HP)

25 Ltrs

NET WT / CRATED WTCRATED SIZE : W x D x H

CRATED VOLUME


AIR CONNECTION

CONSUMPTION

STEAM CONNECTION

CONSUMPTION


S.S Work Station.Swivelling Sleeve Arm.S.S Spotting Guns.Steam Air Gun.Ecological Suction.Lighting Device.

Model : SP 120


Washroom Trolley. 100 kg. Capacity.

Shelf Trolley. 100 kg. Capacity.

Mobile Table.

Stainless steel polished top. Formed out Stainless Steel Tubes and Bars. Electro treated. Fitted with 4 nos swivelling type ball bearing wheels.

Laundry Scrub Station with 2 Sinks.

Formed out of Stainless Steel Tubes & Bars. Electro treated.Foldable Front. Fitted with 4 Nos. Swivelling type ball bearing wheels.

Washroom Trolley. 50 kg. Capacity.

Formed out of Stainless Steel Tubes & Bars. Electro treated. Fitted with 3 nos Shelves & 4 nos Swivelling type ball bearing wheels.

Formed out of Stainless Steel Tubes & Bars. Electro treated.Fitted with 4 Nos. swivelling type ball bearing wheels.

Formed out of Stainless Steel Tubes & Bars. Electro treated. Fitted with 4 Nos. swivelling type ball bearing wheels.

Dry Linen Trolley. 50 kg. Capacity.

0.31M³

0.69M³

MODEL

DTR 50

HOLDING CAPACITY

DIMENSIONS W x D x H

50 Kg 850 x 650 x1680

CRATED SIZECRATED VOLUME

NET WEIGHT

CRATED WEIGHT

44 Kg 70 Kg

1900 x 1050 x 350

MODEL

WTR 50

HOLDING CAPACITY


50 Kg 850 x 650 x 800

NET WEIGHT

CRATED WEIGHT

26 Kg 40 Kg

1050 x 850 x 350


0.69M³

MODEL

STR 100

HOLDING CAPACITY


100 Kg 850 x 650 x1680


NET WEIGHT

CRATED WEIGHT

48 Kg 73 Kg

1900 x 1050 x 350

0.43M³

MODEL

TS 113

HOLDING CAPACITY


50 Kg 1130 x 720 x800

CRATED SIZE

CRATED VOLUME

NET WEIGHT

CRATED WEIGHT

36 Kg / 56 Kg 1330 x 920 x 400 / 0.49M³

1.93M³

MODEL

WTR 100

HOLDING CAPACITY


100 Kg 1300 x 850 x 850

NET WEIGHT

CRATED WEIGHT

45 Kg 70 Kg

1500 x 1050 x 350 0.55M³


Stainless steel construction. Separate Sinks for wash and Rinse. Hot & Cold water Mixers with both Sinks. S.S. Scrubbing board & underneath Shelf.

MODEL

LSR 160

CONNECTIONS DIMENSIONS W x D x H

1600 x 550 x 900


NET WEIGHT

CRATED WEIGHT

55 Kg 95 Kg

1900 x 850 x 1200Ø 15 Each(0.5” BSP Each)

HOT & COLD WATER

0.31M³

0.69 M³

0.69 M³

1.93M³




Trolleys, Tables & Scrub Station.

Model : WTR 50 Model : WTR 100

Model : DTR 50 Model : STR 100

Model : TS 113 & TS 235 Model : LSR 160

TS 235 100 Kg 2350 x 880 x800 78 Kg / 120 Kg 2550 x 1080 x 400 / 1.1M³


Documents

WORLD CLASS LAUNDRY, DRYCLEANING, APPAREL …4.imimg.com/data4/UG/CF/GLADMIN-189275/cl_stefab.pdf · Inverter Drive Single motor variable frequency drive ( VFD ) gets all precision