Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Worktop Support BarsApplication InformationGranite & Quartz Worktops
Metal support bars should be used over unsupported spans of granite and quartz worktops. Follow the diagrams below for where support bars are required.Notes: Cut-outs for a sink or hob in the granite & quartz worktops must be supported by the cabinet front rail and/or support bar.
Hi Line Base Cabinets
*additional central support leg must be addedfor extra stability for granite worktops
NOTE: The 700, 800, 900 & 1000 units do not need a support barif the front rail & centre upright of the cabinet remains in place. If this has been
removed the use of a support bar (TLS1081/4/5) will be required
Note: For use on large drawer units where thereis no centre upright or with a cut-out above
*The support bar TLS1084 should becut down for use with the 700mm cabinet
With Cut-out above
Support Barnot required*
Support Barnot required*
300 400 450 500 600 700/800 900/1000
Drawer Line Base Cabinets
Appliance
Support Barnot required
Support Barnot required
Support Barnot required
Support Barnot required
Support Barnot required
Support Barnot required
Support Barnot required
Support Barnot required
Support Barnot required
300
WashingMachine/Dryer
FreestandingAppliance Space
600Dishwasher
600Oven Housing
600 Fridge/Freezer
400 500 600 800 1000 700*/800 1000900
HD717071v4
450 Dishwasher(with cut-out above)
with sinkdrainer cut-out above
without sinkdrainer cut-out above
with or withoutcut-out
with or withoutcut-out
with or withoutcut-out
with or withoutcut-out
(+18mm MFC Piece fitted tothe underside of the worktop for
appliance to secure into)
(with Metal Plate)
TLS1086TLS1086 TLS1082
TLS1083TLS1082
TLS1084 TLS1081 TLS1085
TLS1087 TLS1088