Upload
others
View
33
Download
0
Embed Size (px)
Citation preview
© Bene GmBH, 01/2020
WORKSTATIOn
1
WORKSTATIONWorkstation is a technologically advanced desk programme with high systemic smart features that can be shaped in various ways to meet individual customer needs. Simple to adapt to specific structu-ral environment. The desk‘s highly flexible table top
frame offers a wide range of use options - together with a variety of base frame shapes and easy to assemble. Workstation desk offer a virtually limit- less range of combinations and are responsive to organisational change.
© Bene GmBH, 01/2020
WORKSTATIOnPRODUCT DeSCRIPTIOn
2
PRODUCT DESCRIPTION
WORKSTATION BASIC
WORKSTATION CLASSIC
WORKSTATION DELTA BY BENE
WORKSTATION SQUARE BY BENE
© Bene GmBH, 01/2020
1
3
2
WORKSTATIOnPRODUCT DeSCRIPTIOn
3
1
2
3
Table top: Three board thickness are available:13 mm compact top, 19 mm, or 25 mm chipboard
Edge (circumferential): Chipboard 19 mm: 2 mm mono-edge, 2mm duo-edge, or 3 mm mono-edge. Chipboard 25 mm: 2 mm mono-edge or 3 mono-edge.
Frame: Basic rectangular, Basic round, Delta by Bene, Delta by Bene wood, Delta by Bene High, SQUARe by Bene, Classic.
PRODUCT DESCRIPTION
Table topFrameSlab-endCable trayHandle and retainer for sliding topUniversal adapterPlate connectorDiecast- clampsTable top clipPlug boxCable support arm foldable cable trayCable support arm fixed cable trayTable top slot
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
4
5
6
7
8
9
10
12
11
13
© Bene GmBH, 01/2020
WORKSTATIOnOVeRVIeW AnD DImenSIOnS
4
OVERVIEW AND DIMENSIONS
Dimensions in mm
DESKTOP SHAPE TG BASIC DESK
Rounded on user side NG
Angled at 150° on user side W1, type 1 Angled at 135° on user side W2, type 2
Rectangle RE 1 Rectangular RE with Soft Edge 1
Straight and sloped on user side S2 1 Sloped and rounded on user side SG 1
Equal-sided 120° angle desk W3
Combination desk K1 Desk combination K3, type 3
Connection board VP
1.622
8001.000667
1.422
667800
1.000800
80080
0
1.400
80080
0
1.600
800
1.400 - 2.400
800 - 2.400 800 - 2.400
1.000
1.400 - 2.400
1.000
1.400 - 2.400
1.200 1.200 1.131 1.131
1.0001.000
800 8001.193 1.293
1.2001.200
800 800
1.200 1.200
1.600 - 2.400 1.600 - 2.400 1.600 - 2.400 1.600 - 2.400
1.6
00
- 1
.80
0
600
800
800
8001.200
1.000 1.200
800 800
800
600 800
800 800
600 800
800
1.6
00
- 1
.80
0
1 Worktables with Classic possible with a maximal nominal width of 2.000 mm
600 / 800900 / 1.000
600 / 800900 / 1.000
900 / 1.000
© Bene GmBH, 01/2020
WORKSTATIOnOVeRVIeW AnD DImenSIOnS
5
1.200 1.200
800 800
800
600
OVERVIEW AND DIMENSIONS
Dimensions in mm
DESK TOP SHAPES COMMUNICATION SEGMENTS TC
Visitor’s side rectangular AE
Visitor side rounded AR
Lateral over 1 table rectangular MV Lateral over 1 table rounded MU
Lateral over 2 tables rectangular ME Lateral over 2 tables rounded MR Lateral round MH
Laterally sloped MS
DESKTOP SHAPES DESK EXTENSION TA
Further installation desk RE 1 Side desk RE 1
KEY
Column position
extension dimension
Wooden structure direction
Slab-end positionSupport leg position Leg length
300
300
800 - 1.599
800 - 1.599
1.600 - 2.400
1.600 - 2.400
400
60
0
1.0
00
90
0
80
0
60
0
80
0
90
0
1.0
00
600
60
0
1.0
00
90
0
80
0
60
0
80
0
90
0
1.0
00
60
06
00
80
08
00
60
06
00
80
08
00
90
09
00
1.0
00
1.0
00
60
06
00
80
08
00
90
09
00
1.0
00
1.0
00
400
90
09
00
1.0
00
1.0
00
60
06
00
80
08
00
90
09
00
1.0
00
1.0
00
400 400 400
600 600 600
400 400 400 400
600 600 600 600
400 400 400
600 600 600 600
400 400 400 400
600 600 600 6006
00
1.2
00
80
0
1.4
00
90
0
1.5
00
1.0
00
1.6
00
600 600 600 600
600
800
900
1.000
800 - 2.400
80
0 -
2.4
00
600 800 900 1.000
1 Worktables with Classic possible with a maximal nominal width of 2.000 mm
800 900 1.000
© Bene GmBH, 01/2020
N L
L R
R
TGL
NTG
TG
L RTG RL
L R
N
WORKSTATIOnLATeRAL DeFInITIOn AnD DIReCTIOn OF TOP SHAPe
6
LATERAL DEFINITION AND DIRECTION OF TOP SHAPE
LATERAL DEFINITION AND DIRECTION OF TOP SHAPE
RE, NG NS, S1, S2, SG
CONNECTION POSITION AND DIRECTION OF TOP SHAPE
W1, W2, K1, K3, VP W3
RE AE, MH, MV, MU ME, MR
left side (L)
Visitor's side left (VL)
User side (U)
right side (R)
Visitor's side right (VR)
Visitor side (V)
User side (U)
lateral (S)Visitor side laterally (VS)
front (F)
Visitor side (V)
Visitor side laterally (VS)
User side (U)front (F)
Visitor side (V)
User side (U)
Visitor side (V)
User side (U)
Visitor side (V)
User side (U)
right side (R)
left side (L)
right side (R)
left side (L)
right side (R)
left side (L)
TA TA TA
TA
TA TA
n ....neutral L ....Left R .... Right
© Bene GmBH, 01/2020
740 200650
850
740 200650
850
150700
850
740650
850
200
WORKSTATIOnFRAme VeRSIOnS
7
FRAME VERSIONS
BASIC RECTANGULAR 1
· Rectangular pipe 60 x 30 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: fixed or in 20 mm grid with tool
BASIC ROUND 1
· Round pipe Ø 60 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: in 20 mm grid with tool
The heights shown all refer to the upper edge of the desk when 25 mm chipboard is being used. In the case of 19 mm chipboard and 13 mm compact top, the desk height is reduced accordingly.
CLASSIC 1
· Thickness of slab-end 41 mm, chipboard (for melamine), mDF (for veneer), fastening construction and cover plate made of steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: in 20 mm grid with tool
DELTA BY BENE 2
· Rectangular pipe 60 x 30 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 740 mm fixed or height adjustable between 650 - 850 mm
1 not possible in combination with desktop shape rectangle Re with Soft edge2 not angled on user side 150° W1
© Bene GmBH, 01/2020
200650
850
1.070
740
1.070
WORKSTATIOnFRAme VeRSIOnS
8
FRAME VERSIONS
SQUARE BY BENE 1
· Rectangular pipe 55 x 25 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: in 20 mm grid with tool
DELTA BY BENE HIGH2
· Rectangular pipe 60 x 30 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 1.070 mm fixed
DELTA BY BENE WOOD 2
· Wooden tube 57 x 53.5 mm, to steel pipe · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 740 mm fixed
DELTA BY BENE HIGH WOOD 2
· Wooden tube 57 x 53.5 mm, to steel pipe · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 1.070 mm fixed
1 not possible in combination with desktop shape rectangle Re with Soft edge2 not angled on user side 150° W1
© Bene GmBH, 01/2020
WORKSTATIOnOPTIOnS TABLe TOP
9
OPTIONS TABLE TOPCABLE OUTLETQuick and easy to pass cabling through the table top. The outlet cover can be slip to one side so that the cable can pass though it.
· 1-3 units per table top possible · Positions specified as fixed per desktop shape
PLUG BOXThe plug box is milled flush into the table top and can be equipped with a connection plug board. Quick and easy access to the plug board is enabled by opening the aluminium flap.
· 1 unit per table top possible · Position per desktop shape specified as fixed · Position in the centre up to desk width of 1.400 mm · Position left or right from desk width of 1.600 mm upwards
Cannot be combined with sliding top and cable flap.
Cable outlet ø 80 mm
Plug box315 x 125 mm
Re, SG, nG S2 VP K1 K3 W1
Possible positions of the grommet hole
Possible positions of the plug box
W2 W3
Re, SG, nG S2 K1 K3 W1 W2
W3
Plug box and integral connection plug boards “Cable and media management” price list
© Bene GmBH, 01/2020
WORKSTATIOnOPTIOnS TABLe TOP
10
OPTIONS TABLE TOP
CABLE FLAPCable flaps allow for easy, ergonomically correct and quick access to cable management.
· Version possible as table top or variation. · The cable flap is divided in the centre from a desk width of 1.401 mm upwards. · Installation on universal adapters included.
SLIDING TOPThe sliding top has a sliding mechanism with a latching function for locking. It can be easily slid to the front by loosening the catch and thus allowing cable management access.
· Sliding information: 190 mm
Only in combination with a cable tray.The sliding top cannot be used with a desk depth of 600 mm.Combination with cable flap is not possible.
Cable flap depth 180 mm
Possible desk top shapes
Re, SG, nG S2
Possible positions for the cable flap
Re, SG, nG S2 VP K1 K3
Only makes sense in connection with a cable tray.Combination with sliding top is not possible.If a shortened sliding top is selected, the depth of the cable flap is reduced by -31 mm.
© Bene GmBH, 01/2020
WORKSTATIOnOPTIOnS
11
OPTIONS
PREPARATION FOR CONNECTION TO T-PANEL (UNIVERSAL ADAPTER)The desk is automatically equipped with universal adapters in this process.This enables different elements to be connected.
· 2 units up to a desk width of 1.400 mm · 3 units from a desk width of 1.401 mm upwards
· T-Panel Pure: behind desk top with gap or behind shortened desk top · T-Panel Curve: behind desk top with gap or in top slot · T-Panel multi: behind desk top with gap or in top slot
T-Panel cannot be connected using table top clamp.
Universal adapter
TABLE TOP SLOTT-Panel multi can be installed in the table top slots. This is fitted ensuring that the rear side runs flush with the rear edge of the desk. The table top slot can also be used for quick and easy cabling through the table top. A part of the cover can be slid to one side to enable the cable to be passed though.
· Positions specified as fixed per desktop shape · 2 units up to a desk width of 1.400 mm (left and right) · 3 units from a desk width of 1.401 mm (left, centre and right) upwards
440 x 650 mm
Positions of the table top slots
Re, SG, nG S2 VP K1 K3 W1
W2 W3
Cabling is no longer possible if a table add-on element with universal adapter (e.g. T-Panel or modesty panel) is already positioned in the area of the table top slot.
© Bene GmBH, 01/2020
WORKSTATIOnOPTIOnS
12
OPTIONSCABLE TRAYThe cable tray is aimed at providing virtually invisible cable management. Depending on the situation, a fixed or foldable cable tray can be selected. A fixed cable tray is the more obvious solution if the table top is movable or its design already includes a cable flap.
With fixed tops, access to cable management is via a visitor's side foldable cable tray. Vertical cable routing can be done by means of cable chains which can be hooked in along the entire length of the cable tray.
· Foldable cable tray only possible up to a desk width of 999 mm. · Fixed or foldable cable tray possible from a desk width of 1.000 mm upwards, depending on requirement.
Possible positions for the cable tray
Cable tray, foldable for fixed top
Cable tray fixed forcable flap or
sliding top
Re, SG, nG S2 VP K1 K3 W1
W2 W3
INSTALLATION OF CONNECTION PLUG BOARDS IN CABLE TRAYSConnection plug board brackets are required as follows, depending on the number and position of the connection plug boards:
The cable tray brackets supplied can simultaneously be used as connection plug board brackets.
with fixed cable tray with foldable cable tray
1 unit
2 units
3 units
2 units
4 units
3 units
© Bene GmBH, 01/2020
WORKSTATIOnOPTIOnS
13
OPTIONSSUPPORTING PEDESTAL CONNECTIONCT supporting pedestals can be attached to the Workstation desks by means of support mounts with heights of 548 mm (9 He) and 598 mm (10 He). In this process, the slab-end is left off on the pedestal side, although the length of the frame remains unchanged. The length of the cable tray also remains the same.
A more obvious choice in connection with cable flap or sliding top. no top overlap is permitted on the pedestal side due to the danger of tipping. modesty panels are only permitted on the rear edge and if the desk depth is greater than the pedestal depth.
FIXED PEDESTAL CONNECTIONThe CT fixed pedestal with a height of 740 mm can be loosened from desks with height-adjustable or fixed-range height adjustment areas. Possible table depths for this are 600, 800, 900 and 1.000 mm. With 900 and 1.000 mm, the top of an 800 mm deep pedestal can be extended backwards by means of an overlap of the top.
The length of the frame remains unchanged.Back-fitting deconstruction to holder is only possible in certain circumstances. no excess overlap of the top is possible on the connection side. not possible for rectangle Re with Soft edge.
Possible positions of the supporting pedestal connection
Possible positions of the fixed pedestal connection
Re, SG, nG S2 VP K1 K3 W1
W2 W3
Re, SG, nG S2 VP K1 K3 W1
W2 W3
© Bene GmBH, 01/2020
WORKSTATIOnOPTIOnS
14
OPTIONSSIDEBOARD CONNECTIONThe sideboard is used as a frame replacement and is possible with a maximum of 1 sideboard per desk. It is possible to form a connection with the sideboard from a desk width of 1.600 mm upwards. Insertion angle is always 90°. The minimum width of the sideboard depends on the depth of the desk and amounts to 1.200 mm or 1.600 mm.
The range of height adjustment in this regard only begins from 680 mm onwards. For reasons of stability and space, the sideboard is only permit-ted with the desktop shapes shown at the bottom.
COMMUNICATIONS SEGMENT
Visitor's side assemblymaterial: Chipboard 19 /25 mm or compact top 13 mm.
Visitor’s side assembly is undertaken using the universal adapters. T-Panel (universal adapter) preparation is therefore required.
Assembly lateral over 2 desksmaterial: Chipboard 19 / 25 mm or compact top 13 mm.
The communication segment is automatically equipped with support columns from a depth of 401 mm onwards. These are square for all slab-foot versions of the basic desk. exception: in the case of Basic round, the support columns of the communication segment cannot be selected in the round version. When a Delta by Bene frame is used, the maximum depth permitted is 400 mm.
In the communication segment shown, the desks are arranged flush with no gap. When an RV dividing wall or panels between both desks are used, the width of the communication segment is automatically adjusted correspondingly.
Possible positions of sideboard connection
visitor's siderectangular
lateralrounded over 2 desks
Re S2 SG nG
© Bene GmBH, 01/2020
15
WORKSTATIOnInSPIRATIOnS
INSPIRATIONS
Inspiration #01 · Workstation with Basic rectangular, white · Rectangular, 1.600 x 800 mm · T-Panel Pure in mW white · Pin board in fabric Remix 183 (dark grey) · CT pedestal with seat upholstery in fabric Remix 183 (dark grey) · B_Run medium-high · CUBe_S sliding door cabinet
Inspiration #02 · Workstation with Classic, veneer chestnut natural · Rectangular, 2.000 x 800 mm · RIYA high · 2x Rondo · 2x CUBe_S sliding door cabinet
© Bene GmBH, 01/2020
16
WORKSTATIOnInSPIRATIOnS
INSPIRATIONS
Inspiration #03 · Workstation with Delta by Bene wood, oak natural · Soft edge, 1.400 x 800 mm · T-Panel Curve in fabric Remix 632 (red) · Organisation rail for steel tray short with flower pot · RIYA high · SIDe_S Sideboard
Inspiration #04 · Workstation with Delta by Bene High, black · Soft edge, 2.200 x 800 mm · 3x SIDe_S Caddies · 3x TImBA Stools high
© Bene GmBH, 01/2020
17
WORKSTATIOnInSPIRATIOnS
INSPIRATIONS
Inspiration #05 · Workstation with SQUARe by Bene, black · Rechteckig, 1.800 x 800 mm · RIYA medium-high · 2x CUBe_S sliding door cabinets
© Bene GmBH, 01/2020
18
WORKSTATIOnCOLOURS & mATeRIALS
1 not available for compact desk top2 not available for duo-edge3 not available for 3 mm edge, single colour
COLOURS & MATERIALS
mW white
mA aluminium 3
AR maple
Ce elm white
TX mustard
CO coco
mS slate 2.3 mB basalt
nG walnut greyBH beech light
mQ office white mC canvas 3 mP platinum 2.3 Tm clay
MELAMINE: Basic colours
MELAMINE: Décor colours 1,2,3
MELAMINE: Décor colours with texture 1,2,3
MELAMINE: Accent colours 1,2,3
MELAMINE: Additional basic colours 1,2,3
eA oak aragon
TS fern greenTH marino blue
mH stone grey
mD urban grey
eZ oak vicenza
© Bene GmBH, 01/2020
19
WORKSTATIOnCOLOURS & mATeRIALS
METAL SURFACE POWDER-COATED
ALUMINIUM ANODISED
WI white SZ blackAL aluminium
AL aluminium
COLOURS & MATERIALS
VENEER: Walnut VENEER: Bamboo
VENEER: Maple VENEER: OakVENEER: Beech
eY oak, silt
nF americ. walnut
AK canad. maple eR oak, amaretto
nB walnut, umbranR walnut, sienna
BG beech, grey eV oak, volcano
nA wal., anthracite BJ bamboo
eG oak grey
KD chestnut natural KP chestnut brown KQ chestnut grey
VENEER: Chestnut