WorkProgramme 01 January-30 June 2015 - DPS · IEC 60958 - Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC ... EN 62707-1:2014 LED-binning - Part 1: General requirements

1

WORK PROGRAMME of General Directorate of Standardization - ALBANIA

(Period 1 January to 30 June 2015)

Technical Committee No. 1 “Quality assurance and social responsibility”, 8 standards

No. Standard number English title

1. CEN/TS 16555-1:2013 Innovation Management - Part 1: Innovation Management System

2. CEN/TS 16595:2013 CBRN - Vulnerability Assessment and Protection of People at Risk

3. EN ISO 22301:2014 Societal security - Business continuity management systems - Requirements

4. EN ISO 22300:2014 Societal security - Terminology (ISO 22300:2012)

5. EN ISO 22311:2014 Societal security - Video-surveillance - Export interoperability

6. EN ISO 22313:2014 Societal security - Business continuity management systems - Guidance

7. EN 16310:2013 Engineering services - Terminology to describe engineering services for

buildings, infrastructure and industrial facilities

8. EN 16311:2013 Engineering services - Terminology to describe engineering services for

industrial products

Technical Committee No. 3 “Electrical and electronical materials”, 82 standards


1. EN 61968-9:2014 Application integration at electric utilities - System interfaces for distribution

management - Part 9: Interfaces for meter reading and control

2. CLC/TR 50083-10-1:2014 Cable networks for television signals, sound signals and interactive services -

Part 10-1: Guidelines for the implementation of return paths in cable networks


Part 2-1: Electromagnetic compatibility measurements


Part 2-2: Interference issues for DVB-T reception in the presence of LTE base

station signals

5. CLC/TS 50083-3-3:2014 Cable networks for television signals, sound signals and interactive services -

Part 3-3: Active wideband equipment for cable networks - Methods of

measurement of the maximum operating output level in the return path

6. EN 61746-1:2011/AC:2014 Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for

single-mode fibres

7. EN 61746-2:2011/AC:2014 Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for

multimode fibres

2

8. EN 61196-10-1:2014 Coaxial communication cables - Part 10-1: Blank detail specification for semi-

rigid cables with polytetrafluoroethylene (PTFE) dielectric

9. EN 61937-6:2006/A1:2014 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying

IEC 60958 - Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC

and MPEG-4 AAC formats

10. EN 62343-2:2014 Dynamic modules - Part 2: Reliability qualification

11. EN 62343-3-3:2014 Dynamic modules - Part 3-3: Performance specification templates - Wavelength

selective switches

12. CLC/TS 50576:2014 Electric cables - Extended application of test results

13. EN 62442-3:2014 Energy performance of lamp controlgear - Part 3: Controlgear for halogen

lamps and LED modules - Method of measurement to determine the efficiency

of the controlgear

14. EN 62714-1:2014 Engineering data exchange format for use in industrial automation systems

engineering - Part 1: Architecture and General Requirements

15. EN 62148-15:2014 Fibre optic active components and devices - Package and interface standards -

Part 15: Discrete vertical cavity surface emitting laser packages

16. EN 62149-2:2014 Fibre optic active components and devices - Performance standards - Part 2: 850

nm discrete vertical cavity surface emitting laser devices

17. EN 62149-3:2014 Fibre optic active components and devices - Performance standards - Part 3:

Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre

optic transmission systems


Seeded reflective semiconductor optical amplifier devices


Seeded reflective semiconductor optical amplifier transceivers

20. EN 62572-3:2014 Fibre optic active components and devices - Reliability standards - Part 3: Laser

modules used for telecommunication

21. EN 61280-2-12:2014 Fibre optic communication subsystem test procedures - Part 2-12: Digital

systems - Measuring eye diagrams and Q-factor using a software triggering

technique for transmission signal quality assessment

22. EN 61300-2-35:2014 Fibre optic interconnecting devices and passive components - Basic test and

measurement procedures - Part 2-35: Tests - Cable nutation


measurement procedures - Part 2-43: Tests - Screen testing of return loss of

single-mode PC optical fibre connectors


measurement procedures - Part 3-14: Examinations and measurements - Error

and repeatability of the attenuation settings of a variable optical attenuator


measurement procedures - Part 3-29: Examinations and measurements -

Spectral transfer characteristics of DWDM devices


measurement procedures - Part 3-47: Examinations and measurements - End

face geometry of PC/APC spherically polished ferrules using interferometry


measurement procedures - Part 3-51: Examinations and measurements - Pin

3

gauge withdrawal force for rectangular ferrule multi-fibre connectors

28. EN 61754-15:2009/AC:2014 Fibre optic interconnecting devices and passive components - Fibre optic

connector interfaces - Part 15: Type LSH connector family

29. EN 61754-4:2013/AC:2014 Fibre optic interconnecting devices and passive components - Fibre optic

connector interfaces - Part 4: Type SC connector family

30. EN 61754-7-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic

connector interfaces - Part 7-1: Type MPO connector family - One fibre row

31. EN 61978-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic

passive chromatic dispersion compensators - Part 1: Generic specification

32. EN 60876-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic spatial

switches - Part 1: Generic specification

33. EN 61753-031-2:2014 Fibre optic interconnecting devices and passive components - Performance

standard - Part 031-2: Non-connectorized single-mode 1×N and 2×N non-

wavelength-selective branching devices for Category C - Controlled

environment


standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN non-

wavelengthselective branching devices for Category O - Uncontrolled

environment


standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device

for category C - Controlled environment


standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR

reflecting devices for category C - Controlled environments


standard - Part 053-2: Non-connectorized single-mode fibre, electrically

controlled, variable optical attenuator for category C - Controlled environments


standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2

spatial switches for category C - Controlled environments


standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1

x N DWDM devices for category C - Controlled environments


standard - Part 1-3: General and guidance for single-mode fibre optic connector

and cable assembly for industrial environment, Category I

41. EN 61280-4-2:2014 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable

plant - Single-mode attenuation and optical return loss measurement

42. EN 62504:2014 General lighting - Light emitting diode (LED) products and related equipment -

Terms and definitions

43. EN 60282-1:2009/A1:2014 High-voltage fuses - Part 1: Current-limiting fuses

44. CLC/TS 62603-1:2014 Industrial process control systems - Guideline for evaluating process control

systems - Part 1: Specifications

45. EN 60061-1:1993/A27:2014 Lamp caps and holders together with gauges for the control of

interchangeability and safety - Part 1: Lamp caps

4

46. EN 61347-2-13:2014 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied

electronic controlgear for LED modules

47. EN 60400:2008/A2:2014 Lampholders for tubular fluorescent lamps and starterholders

48. EN 62707-1:2014 LED-binning - Part 1: General requirements and white colour grid

49. EN 60269-1:2007/A2:2014 Low-voltage fuses - Part 1: General requirements

50. EN 50539-11:2013/A1:2014 Low-voltage surge protective devices - Surge protective devices for specific

application including d.c. - Part 11: Requirements and tests for SPDs in

photovoltaic applications

51. EN 60947-1:2007/A2:2014 Low-voltage switchgear and controlgear - Part 1: General rules

52. EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-

starters - AC semiconductor controllers and contactors for non-motor loads

53. EN 60598-2-22:2014 Luminaires - Part 2-22: Particular requirements - Luminaires for emergency

lighting

54. EN 61034-1:2005/A1:2014 Measurement of smoke density of cables burning under defined conditions -

Part 1: Test apparatus

55. EN 60255-121:2014 Measuring relays and protection equipment - Part 121: Functional requirements

for distance protection

56. EN 60255-27:2014 Measuring relays and protection equipment - Part 27: Product safety

requirements

57. EN 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links

58. EN 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links

59. EN 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent

nanomaterials - Quantum efficiency

60. EN 60794-1-24:2014 Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test

procedures - Electrical test methods

61. EN 60794-2-51:2014 Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplex

and duplex cables for use in cords for controlled environment

62. EN 60793-1-20:2014 Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre

geometry

63. EN 60793-2-50:2013/AC:2014 Optical fibres - Part 2-50: Product specifications - Sectional specification for

class B single-mode fibres

64. EN 60309-

1:1999/A1:2007/AC:2014

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General

requirements

65. EN 61936-1:2010/A1:2014 Power installations exceeding 1 kV a.c. - Part 1: Common rules

66. EN 50575:2014 Power, control and communication cables - Cables for general applications in

construction works subject to reaction to fire requirements

67. EN 61534-1:2011/A1:2014 Powertrack systems - Part 1: General requirements

68. EN 61534-21:2014 Powertrack systems - Part 21: Particular requirements for powertrack systems

intended for wall and ceiling mounting

69. EN 61534-22:2014 Powertrack systems - Part 22: Particular requirements for powertrack systems

intended for onfloor or underfloor installation

70. EN 61169-49:2014 Radio-frequency connectors - Part 49: Sectional specification for SMAA series

R.F connectors

71. EN 61169-45:2014 Radio-frequency connectors -Part 45: Sectional specification for series SQMA

series quick lock RF coaxial connectors

72. CECC 00 111-0:1993 RP 11: Part 0: An introduction to the types of specifications applicable within

5

the CECC System

73. CECC 00 113:1993 RP 13: National Declaration of Implementation (DNM)

74. CECC 00 108:1994 RP8: Attestation of Conformity - Part 1: The CECC Mark and conditions of use -

Part 2: Certificates of approval 00 104 (1982) - Part 3: Procedures for the

attestation of conformity

75. EN 60968:2013/A11:2014 Self-ballasted lamps for general lighting services - Safety requirements

76. EN 60317-53:2014 Specifications for particular types of winding wires - Part 53: Aromatic

polyamide (aramid) tape wrapped rectangular copper wire, temperature index

220

77. EN 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c.

systems

78. EN 60099-9:2014 Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC

converter stations

79. CLC/TR 50609:2014 Technical Guidelines for Radial HVDC Networks

80. EN 60870-6-503:2014 Telecontrol equipment and systems - Part 6-503: Telecontrol protocols

compatible with ISO standards and ITU-T recommendations - TASE.2 Services

and protocol


compatible with ISO standards and ITU-T recommendations - Functional

profile for providing the TASE.2 application service in end systems


compatible with ISO standards and ITU-T recommendations - TASE.2 Object

models

Technical Committee No. 4 “Electrical and electronic devices”, 24 standards


1. CWA 16688:2013 Battery Swap Systems Interfaces for Electric Vehicles

2. EN 61850-3:2014 Communication networks and systems for power utility automation - Part 3:

General requirements

3. EN 61851-23:2014 Electric vehicle conductive charging system - Part 23: DC electric vehicle

charging station

4. EN 61851-24:2014 Electric vehicle conductive charging system - Part 24: Digital communication

between a d.c. EV charging station and an electric vehicle for control of d.c.

charging

5. EN 62798:2014 Industrial electroheating equipment - Test methods for infrared emitters

6. EN 62798:2014/AC:2014 Industrial electroheating equipment - Test methods for infrared emitters

7. EN 61869-4:2014/AC:2014 Instrument transformers - Part 4: Additional requirements for combined

transformers

8. EN 50299-1:2014 Oil-immersed cable connection assemblies for transformers and reactors having

highest voltage for equipment Um from 72,5 kV to 550 kV - Part 1: Fluid-filled

cable terminations

9. EN 50299-2:2014 Oil-immersed cable connection assemblies for transformers and reactors having

6

highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type

cable terminations

10. EN 62751-1:2014 Power losses in voltage sourced converter (VSC) valves for high-voltage direct

current (HVDC) systems - Part 1: General requirements

11. EN 62751-2:2014 Power losses in voltage sourced converter (VSC) valves for high-voltage direct

current (HVDC) systems - Part 2: Modular multilevel converters

12. EN 60034-19:2014 Rotating electrical machines - Part 19: Specific test methods for d.c. machines on

conventional and rectifier-fed supplies

13. EN 60034-2-1:2014 Rotating electrical machines - Part 2-1: Standard methods for determining

losses and efficiency from tests (excluding machines for traction vehicles)

14. EN 60034-26:2006/AC:2014 Rotating electrical machines - Part 26: Effects of unbalanced voltages on the

performance of three-phase cage induction motors

15. EN 62477-1:2012/A11:2014 Safety requirements for power electronic converter systems and equipment -

Part 1: General

16. EN 60831-1:2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated

voltage up to and including 1 000 V - Part 1: General - Performance, testing and

rating - Safety requirements - Guide for installation and operation

17. EN 60831-1:2014/AC:2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated

voltage up to and including 1000 V - Part 1: General - Performance, testing and

rating - Safety requirements - Guide for installation and operation

18. EN 60214-1:2014 Tap-changers - Part 1: Performance requirements and test methods

19. EN 62747:2014 Terminology for voltage-sourced converters (VSC) for high-voltage direct

current (HVDC) systems

20. EN 62501:2009/A1:2014 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC)

power transmission - Electrical testing

21. EN 61400-2:2014 Wind turbines - Part 2: Small wind turbines

22. EN 62271-102:2002/AC:2014 High-voltage switchgear and controlgear - Part 102: Alternating current

disconnectors and earthing switches

23. EN 62271-201:2014 High-voltage switchgear and controlgear - Part 201: AC solid-insulation

enclosed switchgear and controlgear for rated voltages above 1 kV and up to

and including 52 kV

24. EN 62271-202:2014/AC:2014 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage

prefabricated substation

Technical Committee No. 6 “Technical safety and environment” 102 standards


1. CLC Guide 12:2014 Procedure for the withdrawal of conflicting national standards at the

implementation of European Standards prepared under a Part 1/Part 2X system

2. CLC Guide 32:2014 Guidelines for Safety Related Risk Assessment and Risk Reduction for Low

Voltage Equipment

3. CLC/TS 50560:2014 Interoperability framework requirement specification

4. CLC/TS 50574-2:2014 Collection, logistics & treatment requirements for end-of-life household

7

appliances containing volatile fluorocarbons or volatile hydrocarbons - Part 2:

specification for de-pollutio

5. EN 50130-4:2011/A1:2014 Alarm systems - Part 4: Electromagnetic compatibility - Product family

standard: Immunity requirements for components of fire, intruder, hold up,

CCTV, access control and social alarm systems

6. EN 50514:2014 Audio, video and information technology equipment - Routine electrical safety

testing in production

7. EN 50550:2011/A1:2014 Power frequency overvoltage protective device for household and similar

applications (POP)

8. EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures

"d"

9. EN 60079-29-3:2014 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional

safety of fixed gas detection systems

10. EN 60079-31:2014 Explosive atmospheres - Part 31: Equipment dust ignition protection by

enclosure "t"

11. EN 60299:2014 Household electric blankets - Methods for measuring performance

12. EN 60300-1:2014 Dependability management - Part 1: Guidance for management and application

13. EN 60335-1:2012/A11:2014 Household and similar electrical appliances - Safety - Part 1: General

requirements

14. EN 60335-2-

101:2002/A2:2014

Household and similar electrical appliances - Safety - Part 2-101: Particular

requirements for vaporizers

15. EN 60335-2-30:2009/AC:2014 Household and similar electrical appliances - Safety - Part 2-30: Particular

requirements for room heaters

16. EN 60335-2-56:2003/A2:2014 Household and similar electrical appliances - Safety - Part 2-56: Particular

requirements for projectors and similar appliances

17. EN 60350-1:2013/A11:2014 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and

grills - Methods for measuring performance

18. EN 60350-2:2013/A11:2014 Household electric cooking appliances - Part 2: Hobs - Methods for measuring

performance

19. EN 60601-

1:2006/A1:2013/AC:2014

Medical electrical equipment - Part 1: General requirements for basic safety and

essential performance

20. EN 60601-1:2006/A12:2014 Medical electrical equipment - Part 1: General requirements for basic safety and

essential performance

21. EN 60601-2-27:2014 Medical electrical equipment - Part 2-27: Particular requirements for the basic

safety and essential performance of electrocardiographic monitoring equipment

22. EN 60601-2-34:2014 Medical electrical equipment - Part 2-34: Particular requirements for the basic

safety and essential performance of invasive blood pressure monitoring

equipment

23. EN 60601-2-43:2010/AC:2014 Medical electrical equipment - Part 2-43: Particular requirements for basic

safety and essential performance of X-ray equipment for interventional

procedures

24. EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method

25. EN 60695-11-

10:2013/AC:2014

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame

test methods

26. EN 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-

wire flammability test method for end-products (GWEPT)

8

27. EN 60705:2012/A1:2014 Household microwave ovens - Methods for measuring performance

28. EN 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements

29. EN 60904-8:2014 Photovoltaic devices - Part 8: Measurement of spectral responsivity of a

photovoltaic (PV) device

30. EN 61008-1:2012/A1:2014 Residual current operated circuit-breakers without integral overcurrent

protection for household and similar uses (RCCBs) - Part 1: General rules

31. EN 61008-1:2012/A2:2014 Residual current operated circuit-breakers without integral overcurrent

protection for household and similar uses (RCCBs) - Part 1: General rules

32. EN 61009-1:2012/A1:2014 Residual current operated circuit-breakers with integral overcurrent protection

for household and similar uses (RCBOs) - Part 1: General rules

33. EN 61009-1:2012/A2:2014 Residual current operated circuit-breakers with integral overcurrent protection

for household and similar uses (RCBOs) - Part 1: General rules

34. EN 61243-3:2014 Live working - Voltage detectors - Part 3: Two-pole low-voltage type

35. EN 61255:2014 Household electric heating pads - Methods for measuring performance

36. EN 61331-1:2014 Protective devices against diagnostic medical X-radiation - Part 1:

Determination of attenuation properties of materials

37. EN 61331-2:2014 Protective devices against diagnostic medical X-radiation - Part 2: Translucent

protective plates

38. EN 61331-3:2014 Protective devices against diagnostic medical X-radiation - Part 3: Protective

clothing, eyewear and protective patient shields

39. EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500

V d.c. - Equipment for testing, measuring or monitoring of protective measures

- Part 15: Functional safety requirements for insulation monitoring devices in IT

systems and equipment for insulation fault location in IT systems

40. EN 61591:1997/A11:2014 Household range hoods and other cooking fume extractors - Methods for

measuring performance

41. EN 61675-1:2014 Radionuclide imaging devices - Characteristics and test conditions - Part 1:

Positron emission tomographs

42. EN 61730-1:2007/A11:2014 Photovoltaic (PV) module safety qualification - Part 1: Requirements for

construction

43. EN 61910-1:2014 Medical electrical equipment - Radiation dose documentation - Part 1:

Radiation dose structured reports for radiography and radioscopy

44. EN 61970-552:2014 Energy Management System Application Program Interface (EMS-API) - Part

552: CIMXML Model Exchange Format

45. EN 62019:1999/A12:2014 Electrical accessories - Circuit-breakers and similar equipment for household

use - Auxiliary contact units

46. EN 62116:2014 Utility-interconnected photovoltaic inverters - Test procedure of islanding

prevention measures

47. EN 62196-1:2012/A12:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive

charging of electric vehicles - Part 1: General requirements

48. EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive

charging of electric vehicles - Part 1: General requirements

49. EN 62196-2:2012/A12:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive

charging of electric vehicles - Part 2: Dimensional compatibility and

interchangeability requirements for a.c. pin and contact-tube accessories

50. EN 62196- Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive

9

2:2012/A12:2014/AC:2014 charging of electric vehicles - Part 2: Dimensional compatibility and

interchangeability requirements for a.c. pin and contact-tube accessories

51. EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive

charging of electric vehicles - Part 3: Dimensional compatibility and

interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube

vehicle couplers

52. EN 62198:2014 Managing risk in projects - Application guidelines

53. EN 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other

than road vehicles and auxiliary power units (APU) - Safety of electrically

powered industrial trucks

54. EN 62353:2014 Medical electrical equipment - Recurrent test and test after repair of medical

electrical equipment

55. EN 62368-1:2014 Audio/video, information and communication technology equipment - Part 1:

Safety requirements (IEC 62368-1:2014, modified)

56. EN 62485-3:2014 Safety requirements for secondary batteries and battery installations - Part 3:

Traction batteries

57. EN 62670-1:2014 Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard

conditions

58. EN 62675:2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes -

Sealed nickel-metal hydride prismatic rechargeable single cells

59. EN 62676-1-1:2014/AC:2014 Video surveillance systems for use in security applications - Part 1-1: System

requirements - General

60. EN 62716:2013/AC:2014 Photovoltaic (PV) modules - Ammonia corrosion testing

61. EN 62826:2014 Surface cleaning appliances - Floor treatment machines with or without traction

drive, for commercial use - Methods of measuring the performance

62. EN 62841-2-2:2014 Electric motor-operated hand-held tools, transportable tools and lawn and

garden machinery - Safety - Part 2-2: Particular requirements for hand-held

screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified)



sanders and polishers other than disc type (IEC 62841-2-4:2014, modified)



circular saws (IEC 62841-2-5:2014, modified)


garden machinery - Safety - Part 3-1: Particular requirements for transportable

table saws (IEC 62841-3-1:2014, modified)

66. EN 62841-3-6:2014 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and

Garden Machinery - Safety - Part 3-6: Particular requirements for diamond

drills with liquid system (IEC 62841-3-6:2014, modified)

67. EN 62929:2014 Cleaning robots for household use - Dry cleaning: Methods of measuring

performance

68. HD 60364-7-

717:2010/AC:2014

Low-voltage electrical installations - Part 7-717: Requirements for special

installations or locations - Mobile or transportable units

69. HD 60364-7-753:2014 Low-voltage electrical installations - Part 7-753: Requirements for special

installations or locations - Heating cables and embedded heating systems

10

70. HD 60364-7-

753:2014/AC:2014

Low-voltage electrical installations - Part 7-753: Requirements for special

installations or locations - Heating cables and embedded heating systems

71. IEC 60079-29-3:2014 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional

safety of fixed gas detection systems

72. IEC 60079-18:2014 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

73. IEC 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures

"d"

74. IEC 60079-2:2014 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure

"p"

75. IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements

76. IEC 60079-0:2011/ISH1:2013 Interpretation sheet 1 - Explosive atmospheres - Part 0: Equipment - General

requirements

77. IEC 60079-0:2011/ISH2:2014 Interpretation sheet 2 - Explosive atmospheres - Part 0: Equipment - General

requirements

78. IEC/TS 61496-4-2:2014 Safety of machinery - Electro-sensitive protective equipment - Part 4-2:

Particular requirements for equipment using vision based protective devices

(VBPD) - Additional requirements when using reference pattern techniques

(VBPDPP)

79. IEC/TR 61592:2003 Household electrical appliances - Guidelines for consumer panel testing

80. IEC 61214:1993 Hand-held mains voltage operated spray guns - Performance requirements

81. IEC/TR 61923:1997 Household electrical appliances - Method of measuring performance -

Assessment of repeatability and reproducibility

82. IEC/TR 62617:2010 Home laundry appliances - Uncertainty reporting of measurements

83. IEC 62885-3:2014 Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods

for measuring the performance

84. IEC 60335-2-30/AC 1:2014 Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-

30: Particular requirements for room heaters

85. IEC 60335-2-90:2006/A2:2014 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-90:

Particular requirements for commercial microwave ovens

86. IEC 60335-2-

89:2010/ISH1:2014

Interpretation sheet 1 - Household and similar electrical appliances - Safety -

Part 2-89: Particular requirements for commercial refrigerating appliances with

an incorporated or remote refrigerant unit or compressor

87. IEC 60335-2-89:2010/A1:2012 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-89:

Particular requirements for commercial refrigerating appliances with an

incorporated or remote refrigerant unit or compressor

88. IEC 60730-1:2013 Automatic electrical controls - Part 1: General requirements

89. IEC 60730-1:2013/AC 1:2014 Corrigendum 1 - Automatic electrical controls - Part 1: General requirements

90. IEC 60730-2-22:2014 Automatic electrical controls - Part 2-22: Particular requirements for thermal

motor protectors

91. IEC 60839-5-1:2014 Alarm and electronic security systems - Part 5-1: Alarm transmission systems -

General requirements

92. IEC 60839-7-6:2001 Alarm systems - Part 7-6: Message formats and protocols for serial data

interfaces in alarm transmission systems - Alarm system interfaces employing

ITU-T Recommendation V.24/V.28 signalling


interfaces in alarm transmission systems - Alarm system interfaces for plug-in

11

alarm system transceivers


interfaces in alarm transmission systems - Serial protocol for use by digital

communicator systems using ITU-T Recommandation V.23 signalling at

interfaces with the PSTN


interfaces in alarm transmission systems - PTT interfaces for dedicated

communications channels using ITU-T Recommendation V.23 signalling


interfaces in alarm transmission systems - Terminal interfaces employing ITU-T

Recommendation V.24/V.28 signalling

97. IEC 60839-10-1:1995 Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger

cars

98. IEC 60839-11-2:2014 Alarm and electronic security systems - Part 11-2: Electronic access control

systems - Application guidelines

99. IEC 62599-2:2010 Alarm systems - Part 2: Electromagnetic compatibility - Immunity requirements

for components of fire and security alarm systems

100. IEC/TR 60695-11-30:2001 Fire hazard testing - Part 11-30: Test flames - History and development from

1979 to 1999

101. IEC/TS 60695-11-40:2002 Fire hazard testing - Part 11-40: Test flames - Confirmatory tests - Guidance

102. IEC 62841-3-9:2014 Electric motor-operated hand-held tools, transportable tools and lawn and

garden machinery - Safety - Part 3-9: Particular requirements for transportable

mitre saws

Technical Committee No. 7 “Semiconductor materials and devices. Electromechanical

components and mechanical structures for electronic devices”,

56 standards


1. CEN/CLC Guide 26:2013 Railway applications - Preparation of standards for urban rail systems design,

construction, manufacture, operations and maintenance.

2. EN 50360:2001/AC:2006 Product standard to demonstrate the compliance of mobile phones with the

basic restrictions related to human exposure to electromagnetic fields (300 MHz

- 3 GHz)

3. CLC/TR 50542-1:2014 Railway applications - Driver's cab train display controller (TDC) - Part 1:

General architecture

4. CLC/TR 50610:2014 Railway applications - Train Modes functional interface specification

5. CLC/TR 50623:2014 Railway applications - Functional Interface Specification - Door System

6. CLC/TR 50624:2014 Railway applications - Functional Interface Specification - Pantograph System

7. EN 140101-

806:2008/AC:2014

Detail Specification: Fixed low power film resistors - Metal film resistors on

high grade ceramic, conformal coated or molded, axial or preformed leads

8. EN 140401- Detail specification: Fixed low power film SMD resistors - Rectangular -

12

802:2007/AC:2014 Stability classes 1; 2

9. EN 50238-1:2003 Railway applications - Compatibility between rolling stock and train detection

systems

10. EN 50238-1:2003/AC:2014 Railway applications - Compatibility between rolling stock and train detection

systems

11. EN 50355:2013 Railway applications - Railway rolling stock cables having special fire

performance - Guide to use

12. EN 60352-5:2012/AC:2014 Solderless connections - Part 5: Press-in connections - General requirements,

test methods and practical guidance

13. EN 60749-42:2014 Semiconductor devices - Mechanical and climatic test methods - Part 42:

Temperature and humidity storage

14. EN 60871-1:2014 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V -

Part 1: General

15. EN 60871-4:2014 Shunt capacitors for AC power systems having a rated voltage above 1 000 V -

Part 4: Internal fuses

16. EN 60974-10:2014 Arc welding equipment - Part 10: Electromagnetic compatibility (EMC)

requirements

17. EN 61076-2-104:2014 Connectors for electronic equipment - Product requirements - Part 2-104:

Circular connectors - Detail specification for circular connectors with M8 screw-

locking or snap-locking

18. EN 61076-2-109:2014 Connectors for electronic equipment - Product requirements - Part 2-109:

Circular connectors - Detail specification for connectors with M 12 × 1 screw-

locking, for data transmission frequencies up to 500 MHz

19. EN 61287-1:2014 Railway applications - Power converters installed on board rolling stock - Part

1: Characteristics and test methods

20. EN 61287-1:2014/AC:2014 Railway applications - Power converters installed on board rolling stock - Part


21. EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to

100 kHz with regard to exposure of human beings - Part 1: Requirements for

measuring instruments

22. EN 62021-3:2014 Insulating liquids - Determination of acidity - Part 3: Test methods for non

mineral insulating oils

23. EN 62047-20:2014 Semiconductor devices - Micro-electromechanical devices - Part 20: Gyroscopes

24. EN 62047-21:2014 Semiconductor devices - Micro-electromechanical devices - Part 21: Test

method for Poisson's ratio of thin film MEMS materials

25. EN 62047-22:2014 Semiconductor devices - Micro-electromechanical devices - Part 22:

Electromechanical tensile test method for conductive thin films on flexible

substrates

26. EN 62290-1:2014 Railway applications - Urban guided transport management and

command/control systems - Part 1: System principles and fundamental

concepts

27. EN 62290-2:2014 Railway applications - Urban guided transport management and

command/control systems - Part 2: Functional requirements specification

28. EN 62489-2:2014 Electroacoustics - Audio-frequency induction loop systems for assisted hearing

- Part 2: Methods of calculating and measuring the low-frequency magnetic

field emissions from the loop for assessing conformity with guidelines on limits

13

for human exposure

29. EN 62701:2014 Fluids for electrotechnical applications - Recycled mineral insulating oils for

transformers and switchgears

30. IEC 60850:2014 Railway applications - Supply voltages of traction systems

31. IEC 61287-1:2014 Railway applications - Power converters installed on board rolling stock - Part


32. IEC 61375-2-5:2014 Electronic railway equipment - Train communication network (TCN) - Part 2-5:

Ethernet train backbone

33. IEC 61991:2000 Railway applications - Rolling stock - Protective provisions against electrical

hazards

34. IEC 61992-1:2006 Railway applications - Fixed installations - DC switchgear - Part 1: General

35. IEC 61992-

1:2006/AMD1:2014

Amendment 1 - Railway applications - Fixed installations - DC switchgear -

Part 2: DC circuit-breakers

36. IEC 61992-2:2006 Railway applications - Fixed installations - DC switchgear - Part 2: DC circuit-

breakers

37. IEC 61992-

2:2006/AMD1:2014


Part 2: DC circuit-breakers

38. IEC 61992-3:2006 Railway applications - Fixed installations - DC switchgear - Part 3: Indoor d.c.

disconnectors, switch-disconnectors and earthing switches

39. IEC 61992-4:2006 Railway applications - Fixed installations - DC switchgear - Part 4: Outdoor d.c.

disconnectors, switch-disconnectors and earthing switches

40. IEC 61992-5:2006 Railway applications - Fixed installations - DC switchgear - Part 5: Surge

arresters and low-voltage limiters for specific use in d.c. systems

41. IEC 61992-6:2006 Railway applications - Fixed installations - DC switchgear - Part 6: DC

switchgear assemblies

42. IEC 61992-

6:2006/AMD1:2014


Part 6: DC switchgear assemblies

43. IEC 61992-7-1:2006 Railway applications - Fixed installations - DC switchgear - Part 7-1:

Measurement, control and protection devices for specific use in d.c. traction

systems - Application guide



systems - Isolating current transducers and other current measuring devices



systems - Isolating voltage transducers and other voltage measuring devices

46. IEC/TS 61967-3:2014 Integrated circuits - Measurement of electromagnetic emissions - Part 3:

Measurement of radiated emissions - Surface scan method

47. IEC/TS 62132-9:2014 Integrated circuits - Measurement of electromagnetic immunity - Part 9:

Measurement of radiated immunity - Surface scan method

48. IEC 60115-8-1:2014 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail

specification: Fixed surface mount (SMD) low power film resistors for general

electronic equipment, classification level G

49. IEC/TR 62652:2010 Effects of engaging and separating under electrical load on connector interfaces

in cabling used to support IEEE 802.3af (power-over-ethernet) applications

50. IEC/TS 61586:1997 Estimation of the reliability of electrical connectors

14

51. IEC 60297-3-108:2014 Mechanical structures for electronic equipment - Dimensions of mechanical

structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type

subracks and plug-in units

52. IEC/TS 62454:2007 Mechanical structures for electronic equipment - Design guide: Interface

dimensions and provisions for water cooling of electronic equipment within

cabinets of the IEC 60297 and IEC 60917 series

53. IEC/TS 62610-1:2009 Mechanical structures for electronic equipment - Thermal management for

cabinets in accordance wit IEC 60297 and IEC 60917 series - Part 1: Design

guide: Interface dimension and provision for thermoelectrical cooling systems

(Peltier effect)


cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Design

guide: Method for determination of forced air-cooling structure


cabinets in accordance with IEC 60297 and IEC 60917 series - Part 3: Design

guide: Evaluation method for thermoelectrical cooling systems (Peltier effect)

56. IEC 61340-4-8:2014 Electrostatics - Part 4-8: Standard test methods for specific applications -

Electrostatic discharge shielding - Bags

Technical Committee No. 8 “Measuring equipment. Testing techniques”, 27 standards


1. EN 62555:2014 Ultrasonics - Power measurement - High intensity therapeutic ultrasound

(HITU) transducers and systems

2. EN 50491-1:2014 General requirements for Home and Building Electronic Systems (HBES) and

Building Automation and Control Systems (BACS) - Part 1: General

requirements

3. EN 50491-6-1:2014 General requirements for Home and Building Electronic Systems (HBES) and

Building Automation and Control Systems (BACS) - Part 6-1: HBES

installations - Installation and planning

4. EN 55016-1-1:2010/A2:2014 Specification for radio disturbance and immunity measuring apparatus and

methods - Part 1-1: Radio disturbance and immunity measuring apparatus -

Measuring apparatus

5. EN 55016-1-2:2014 Specification for radio disturbance and immunity measuring apparatus and

methods - Part 1-2: Radio disturbance and immunity measuring apparatus -

Coupling devices for conducted disturbance measurements

6. EN 55016-2-1:2014 Specification for radio disturbance and immunity measuring apparatus and

methods - Part 2-1: Methods of measurement of disturbances and immunity -

Conducted disturbance measurements

7. EN 55016-4-2:2011/A1:2014 Specification for radio disturbance and immunity measuring apparatus and

methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement

instrumentation uncertainty

8. EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

15

9. EN 60754-1:2014 Test on gases evolved during combustion of materials from cables - Part 1:

Determination of the halogen acid gas content

10. EN 60754-2:2014 Test on gases evolved during combustion of materials from cables - Part 2:

Determination of acidity (by pH measurement) and conductivity

11. EN 60770-3:2014 Transmitters for use in industrial-process control systems - Part 3: Methods for

performance evaluation of intelligent transmitters

12. EN 61000-2-4:2002/AC:2014 Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility

levels in industrial plants for low-frequency conducted disturbances

13. EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic

current emissions (equipment input current ≤ 16 A per phase)

14. EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage

changes, voltage fluctuations and flicker in public low-voltage supply systems,

for equipment with rated current <= 16 A per phase and not subject to

conditional connection

15. EN 61000-4-19:2014 Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement

techniques - Test for immunity to conducted, differential mode disturbances

and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports


techniques - Surge immunity test


techniques - Immunity to conducted disturbances, induced by radio-frequency

fields

18. EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and

laboratory use - Part 2-010: Particular requirements for laboratory equipment

for the heating of Materials

19. EN 61260-1:2014 Electroacoustics - Octave-band and fractional-octave-band filters - Part 1:

Specifications

20. EN 61672-3:2013 Electroacoustics - Sound level meters - Part 3: Periodic tests

21. EN 61996-1:2013/AC:2014 Maritime navigation and radiocommunication equipment and systems -

Shipborne voyage data recorder (VDR) - Part 1: Performance requirements,

methods of testing and required test results

22. EN 62056-3-1:2014 Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of

local area networks on twisted pair with carrier signalling

23. EN 62056-5-3:2014 Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3:

DLMS/COSEM application layer

24. EN 62586-1:2014 Power quality measurement in power supply systems - Part 1: Power quality

instruments (PQI)

25. EN 62586-2:2014 Power quality measurement in power supply systems - Part 2: Functional tests

and uncertainty requirements

26. EN 62586-2:2014/AC:2014 Power quality measurement in power supply systems - Part 2: Functional tests

and uncertainty requirements

27. EN 62673:2013 Methodology for communication network dependability assessment and

assurance

16

Technical Committee No. 9 “Information and communication technology”, 51 standards


1. CEN/CLC/ETSI TR

101550:2014

Documents relevant to EN 301 549 "Accessibility requirements suitable for

public procurement of ICT products and services in Europe"

2. CEN/CLC/ETSI TR

101551:2014

Guidelines on the use of accessibility award criteria suitable for public

procurement of ICT products and services in Europe

3. CEN/CLC/ETSI/TR 101

552:2014

Guidance for the application of conformity assessment to accessibility

requirements for public procurement of ICT products and services in Europe

4. CLC/TR 50584:2014 Information technology - CENELEC/ETSI Glossary of terms and definitions for

broadband deployment including sustainability aspects

5. EN 301549:2014 Accessibility requirements suitable for public procurement of ICT products and

services in Europe

6. EN 50083-8:2013 Cable networks for television signals, sound signals and interactive services -

Part 8: Electromagnetic compatibility for networks

7. EN 50173-6:2013 Information technology - Generic cabling systems - Part 6: Distributed building

services

8. EN 50174-1:2009/A2:2014 Information technology - Cabling installation - Part 1: Installation specification

and quality assurance

9. EN 50174-2:2009/A2:2014 Information technology - Cabling installation - Part 2: Installation planning and

practices inside buildings

10. EN 50174-3:2013 Information technology - Cabling installation - Part 3: Installation planning and

practices outside buildings

11. EN 50563:2011/A1:2013 External a.c. - d.c. and a.c. - a.c. power supplies – Determination of no-load

power and average efficiency of active modes

12. EN 50566:2013/AC:2014 Product standard to demonstrate compliance of radio frequency fields from

handheld and body-mounted wireless communication devices used by the

general public (30 MHz - 6 GHz)

13. EN 50585:2014 Communications protocol to transport satellite delivered signals over IP

networks

14. EN 50600-2-1:2014 Information technology - Data centre facilities and infrastructures - Part 2-1:

Building construction


Power distribution


Environmental control

17. EN 50700:2014 Information technology - Premises distribution access network (PDAN) cabling

to support deployment of optical broadband networks

18. EN 60268-4:2014 Sound system equipment - Part 4: Microphones


Part 1: System performance of forward paths


Part 10: System performance for return paths

21. EN 60728-1-1:2014 Cable networks for television signals, sound signals and interactive services -

17

Part 1-1: RF cabling for two way home networks

22. EN 60728-1-2:2014 Cable networks for television signals, sound signals and interactive services -

Part 1-2: Performance requirements for signals delivered at the system outlet in

operation


Part 14: Optical transmission systems using RFoG technology

24. EN 60958-1:2008/A1:2014 Digital audio interface - Part 1: General

25. EN 61131-9:2013 Programmable controllers - Part 9: Single-drop digital communication interface

for small sensors and actuators (SDCI)

26. EN 61162-3:2008/A2:2014 Maritime navigation and radiocommunication equipment and systems - Digital

interfaces - Part 3: Serial data instrument network

27. EN 61883-6:2014 Consumer audio/video equipment - Digital interface - Part 6: Audio and music

data transmission protocol

28. EN 61883-8:2009/A1:2014 Consumer audio/video equipment - Digital interface - Part 8: Transmission of

ITU-R BT.601 style digital video data

29. EN 61918:2013 Industrial communication networks - Installation of communication networks

in industrial premises

30. EN 61966-12-2:2014 Multimedia systems and equipment - Colour measurement and management -

Part 12-2: Simple metadata format for identification of colour gamut

31. EN 61970-301:2014 Energy management system application program interface (EMS-API) - Part

301: Common information model (CIM) base


452: CIM Static transmission network model profiles


453: Diagram layout profile

34. EN 62065:2014 Maritime navigation and radiocommunication equipment and systems - Track

control systems - Operational and performance requirements, methods of

testing and required test results

35. EN 62287-1:2011/A1:2014 Maritime navigation and radiocommunication equipment and systems - Class

B shipborne equipment of the automatic identification system (AIS) - Part 1:

Carrier-sense time division multiple access (CSTDMA) techniques

36. EN 62288:2014 Maritime navigation and radiocommunication equipment and systems -

Presentation of navigation-related information on shipborne navigational

displays - General requirements, methods of testing and required test results

37. EN 62379-5-1:2014 Common control interface for networked digital audio and video products -

Part 5-1: Transmission over networks - General

38. EN 62379-5-2:2014 Common control interface for networked digital audio and video products -

Part 5-2: Transmission over networks - Signalling (TA4)

39. EN 62388:2013/AC:2014 Maritime navigation and radiocommunication equipment and systems -

Shipborne radar - Performance requirements, methods of testing and required

test results

40. EN 62394:2014 Service diagnostic interface for consumer electronics products and networks -

Implementation for echonet

41. EN 62448:2014 Multimedia systems and equipment - Multimedia e-publishing and e-books -

Generic format for e-publishing

42. EN 62481-1:2014 Digital living network alliance (DLNA) home networked device

18

interoperability guidelines - Part 1: Architecture and protocols


interoperability guidelines - Part 2: DLNA media formats


interoperability guidelines - Part 3: Link protection


interoperability guidelines - Part 4: DRM interoperability solutions (TA9)


interoperability guidelines - Part 5: DLNA Device Profile guidelines

47. EN 62608-1:2014 Multimedia home network configuration - Basic Reference model - Part 1:

System model

48. EN 62680-1:2013 Universal serial bus interfaces for data and power - Part 1: Universal serial bus

specification, revision 2.0

49. EN 62680-2:2013 Universal serial bus interfaces for data and power - Part 2: Universal serial bus -

Micro-USB cables and connectors specification, revision 1.01

50. EN 62680-3:2013 Universal serial bus interfaces for data and power - Part 3: USB battery

charging specification, Revision 1.2

51. EN 62680-4:2014 Universal serial bus interfaces for data and power - Part 4: Universal Serial Bus

Cables and Connectors Class Document, Revision 2.0

Technical Committee No. 10 “Digital and analogue telecommunication systems”, 200 standards


1. EN 300 113-2 V1.5.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land

mobile service; Radio equipment intended for the transmission of data (and/or

speech) using constant or non-constant envelope modulation and having an

antenna connector; Part 2: Harmonized EN covering the essential requirements

of Neni 3.2 of the R&TTE Directive

2. EN 300 220-2 V2.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range

Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz

frequency range with power levels ranging up to 500 mW; Part 2: Harmonized

EN covering essential requirements under Neni 3.2 of the R&TTE Directive


Mobile Service; Radio equipment using integral antennas intended primarily

for analogue speech; Part 2: Harmonized EN covering the essential

requirements of Neni 3.2 of the R&TTE Directive

4. EN 300 328 V1.8.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband

transmission systems; Data transmission equipment operating in the 2,4 GHz

ISM band and using wide band modulation techniques; Harmonized EN

covering the essential requirements of Neni 3.2 of the R&TTE Directive

5. EN 300 422-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless

microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN


19

6. EN 300 433-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Citizens'

Band (CB) radio equipment; Part 2: Harmonized EN covering the essential


7. EN 300 609-4 V9.2.1 Global System for Mobile communications (GSM); Part 4: Harmonized EN for

GSM Repeaters covering the essential requirements of Neni 3.2 of the R&TTE

Directive

8. EN 300 609-4 V10.2.1 Global System for Mobile communications (GSM);Part 4: Harmonized EN for

GSM Repeaters covering the essential requirements of Neni 3.2 of the R&TTE

Directive

9. EN 300 674-2-1 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Road

Transport and Traffic Telematics (RTTT); Dedicated Short Range

Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s)

operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band; Part 2:

Harmonized EN under Neni 3.2 of the R&TTE Directive; Sub-part 1:

Requirements for the Road Side Units (RSU)

10. EN 300 674-2-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Road

Transport and Traffic Telematics (RTTT); Dedicated Short Range

Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s)

operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band; Part 2:

Harmonized EN under Neni 3.2 of the R&TTE Directive; Sub-part 2:

Requirements for the On-Board Units (OBU)

11. EN 300 676-2 V1.5.1 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers

and transceivers for the VHF aeronautical mobile service using amplitude

modulation;Part 2: Harmonized EN covering essential requirements of Neni 3.2

of the R&TTE Directive

12. EN 300 698-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio

telephone transmitters and receivers for the maritime mobile service operating

in the VHF bands used on inland waterways; Part 2: Harmonized EN covering

essential requirements of Neni 3.2 of the R&TTE Directive


telephone transmitters and receivers for the maritime mobile service operating

in the VHF bands used on inland waterways; Part 3: Harmonized EN covering

essential requirements of Neni 3.3 (e) of the R&TTE Directive

14. EN 300 718-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche

Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering


15. EN 300 718-3 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche

beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering the

essential requirements of Neni 3.3e of the R&TTE Directive

16. EN 300 720-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ultra-High

Frequency (UHF) on-board vessels communications systems and equipment;

Part 2: Harmonized EN under Neni 3.2 of the R&TTE Directive

17. EN 301 025-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF

radiotelephone equipment for general communications and associated

equipment for Class "D" Digital Selective Calling (DSC); Part 2: Harmonized

EN covering the essential requirements of Neni 3.2 of the R&TTE Directive


20







EN covering the essential requirements of Neni 3.3(e) of the R&TTE Directive


Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment

operating in the 76 GHz to 77 GHz; Part 2: Harmonized EN covering essential



Mobile Service; Radio equipment for analogue and/or digital communication

(speech and/or data) and operating on narrow band channels and having an

antenna connector; Part 2: Harmonized EN covering essential requirements of

Neni 3.2 of the R&TTE Directive

22. EN 301 178-2 V1.2.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable

Very High Frequency (VHF) radiotelephone equipment for the maritime

mobile service operating in the VHF bands (for non-GMDSS applications only);

Part 2: Harmonized EN covering essential requirements of Neni 3.2 of the

R&TTE Directive

23. EN 301 357-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless

audio devices in the range 25 MHz to 2 000 MHz; Part 2: Harmonized EN

covering essential requirements of Neni 3.2 of the R&TTE Directive

24. EN 301 360 V1.2.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite

Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting

towards geostationary satellites in the 27,5 GHz to 29,5 GHz frequency bands

covering essential requirements under Neni 3.2 of the R&TTE Directive

25. EN 301 406 V2.1.1 Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for

Digital Enhanced Cordless Telecommunications (DECT) covering the essential

requirements under Neni 3.2 of the R&TTE Directive; Generic radio

26. EN 301 423 V1.1.1 Electromagnetic Compatibility and Radio spectrum Matters (ERM);

Harmonized Standard for the Terrestrial Flight Telecommunications System

under Neni 3.2 of the R&TTE Directive

27. EN 301 426 V1.2.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Low data rate

Land Mobile satellite Earth Stations (LMES) and Maritime Mobile satellite Earth

Stations (MMES) not intended for distress and safety communications

operating in the 1,5/1,6 GHz frequency bands covering essential requirements

under Neni 3.2 of the R&TTE Directive

28. EN 301 427 V1.2.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Low data rate

Mobile satellite Earth Stations (MESs) except aeronautical mobile satellite earth

stations, operating in the 11/12/14 GHz frequency bands covering essential

requirements under Neni 3.2 of the R&TTE directive

29. EN 301 428 V1.3.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small

Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only

satellite earth stations operating in the 11/12/14 GHz frequency bands covering

essential requirements under Neni 3.2 of the R&TTE directive

21

30. EN 301 430 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite News

Gathering Transportable Earth Stations (SNG TES) operating in the 11-12/13-14

GHz frequency bands covering essential requirements under Neni 3.2 of the

R&TTE Directive

31. EN 301 441 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth

Stations (MESs), including handheld earth stations, for Satellite Personal

Communications Networks (S-PCN) in the 1,6/2,4 GHz bands under the Mobile

Satellite Service (MSS) covering essential requirements under Neni 3.2 of the

R&TTE directive


Stations (MESs), including handheld earth stations, for Satellite Personal

Communications Networks (S-PCN) in the 2,0 GHz bands under the Mobile

Satellite Service (MSS) covering essential requirements under Neni 3.2 of the

R&TTE directive

33. EN 301 443 V1.3.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small

Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only

satellite earth stations operating in the 4 GHz and 6 GHz frequency bands


34. EN 301 444 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Land Mobile

Earth Stations (LMES) operating in the 1,5 GHz and 1,6 GHz bands providing

voice and/or data communications covering essential requirements under Neni

3.2 of the R&TTE Directive



voice and/or data communications covering essential requirements of Neni 3.2

of the R&TTE directive



voice and/or data communications covering essential requirements of Neni 3.2

of the R&TTE directive

37. EN 301 447 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for satellite Earth

Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands

allocated to the Fixed Satellite Service (FSS) covering essential requirements of

Neni 3.2 of the R&TTE directive

38. EN 301 449 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);Harmonized

EN for CDMA spread spectrum base stations operating in the 450 MHz cellular

band (CDMA 450) and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR)


39. EN 301 459 V1.4.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite

Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting

towards satellites in geostationary orbit in the 29,5 GHz to 30,0 GHz frequency

bands covering essential requirements under Neni 3.2 of the R&TTE Directive

40. EN 301 489-10 V1.3.1 ElectroMagnetic compatibility and Radio spectrum Matters (ERM);

ElectroMagnetic Compatibility (EMC) standard for radio equipment and

services; Part 10: Specific conditions for First (CT1 and CT1+) and Second

Generation Cordless Telephone (CT2) equipment

41. EN 301 489-11 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);

22


services; Part 11: Specific conditions for terrestrial sound broadcasting service

transmitters

42. EN 301 489-12 V2.2.2 Electromagnetic compatibility and Radio spectrum Matters

(ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and

services;Part 12: Specific conditions for Very Small Aperture Terminal, Satellite

Interactive Earth Stations operated in the frequency ranges between 4 GHz and

30 GHz in the Fixed Satellite Service (FSS)



services; Part 13: Specific conditions for Citizens' Band (CB) radio and ancillary

equipment (speech and non-speech)



services; Part 14: Specific conditions for analogue and digital terrestrial TV

broadcasting service transmitters



services; Part 15: Specific conditions for commercially available amateur radio

equipment



services; Part 16: Specific conditions for analogue cellular radio

communications equipment, mobile and portable


ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17:

Specific conditions for Broadband Data Transmission Systems


ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17:

Specific conditions for Broadband Data Transmission Systems



services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA)

equipment



services; Part 19: Specific conditions for Receive Only Mobile Earth Stations

(ROMES) operating in the 1,5 GHz band providing data communication



services; Part 2: Specific conditions for radio paging equipment



services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the

Mobile Satellite Services (MSS)



23

services; Part 22: Specific requirements for ground-based VHF aeronautical

mobile and fixed radio equipment



services; Part 23: Specific conditions for IMT-2000 CDMA, Direct Spread (UTRA

and E-UTRA) Base Station (BS) radio, repeater and ancillary equipment



services; Part 24:Specific conditions for IMT-2000 CDMA Direct Spread (UTRA

and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment

56. EN 301 489-25 V2.3.2 Electromagnetic compatibility and radio spectrum matters (ERM);

Electromagnetic compatibility (EMC) standard for radio equipment and

services; Part 25: Specific conditions for CDMA 1x Spread Spectrum Mobile

Stations and ancillary equipment

57. EN 301 489-26 V2.3.2 Electromagnetic compatibility and radio spectrum matters (ERM);

Electromagnetic compatibility (EMC) standard for radio equipment and

services; Part 26: Specific conditions for CDMA 1x spread spectrum base

stations, repeaters and ancillary equipment



services; Part 27: Specific conditions for Ultra Low Power Active Medical

Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)

59. EN 301 489-28 V1.1.1 Electromagnetic compatibility and Radio Spectrum Matters (ERM);


services; Part 28: Specific conditions for wireless digital video links



services; Part 29: Specific conditions for Medical Data Service Devices (MEDS)

operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands



services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on

frequencies between 9 kHz and 40 GHz



services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on

frequencies between 9 kHz and 246 GHz



services; Part 31: Specific conditions for equipment in the 9 kHz to 315 kHz

band for Ultra Low Power Active Medical Implants (ULP-AMI) and related

peripheral devices (ULP-AMI-P)



services; Part 32: Specific conditions for Ground and Wall Probing Radar

applications


24


services; Part 33: Specific conditions for Ultra Wide Band (UWB)

communications devices



services; Part 34: Specific conditions for External Power Supply (EPS) for

mobile phones



services; Part 34: Specific conditions for External Power Supply (EPS) for

mobile phones



services; Part 4: Specific conditions for fixed radio links, Broadband Data

Transmission System Base stations, ancillary equipment and services



services;Part 4: Specific conditions for fixed radio links and ancillary equipment



services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and

ancillary equipment (speech and non-speech)



services; Part 50: Specific conditions for Cellular Communication Base Station

(BS), repeater and ancillary equipment



services; Part 6: Specific conditions for Digital Enhanced Cordless

Telecommunications (DECT) equipment



services; Part 7: Specific conditions for mobile and portable radio and ancillary

equipment of digital cellular radio telecommunications systems (GSM and

DCS)



services; Part 8: Specific conditions for GSM base stations



services; Part 9: Specific conditions for wireless microphones, similar Radio

Frequency (RF) audio link equipment, cordless audio and in-ear monitoring

devices

76. EN 301 502 V10.2.1 Global System for Mobile communications (GSM);Harmonized EN for Base

Station Equipment covering the essential requirements of Neni 3.2 of the

R&TTE Directive

77. EN 301 502 V9.2.1 Global System for Mobile communications (GSM); Harmonized EN for Base

25

Station Equipment covering the essential requirements of Neni 3.2 of the

R&TTE Directive

78. EN 301 511 V9.0.2 Global System for Mobile communications (GSM); Harmonized EN for mobile

stations in the GSM 900 and GSM 1800 bands covering essential requirements

under Neni 3.2 of the R&TTE directive (1999/5/EC)

79. EN 301 526 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);

Harmonized EN for CDMA spread spectrum mobile stations operating in the

450 MHz cellular band (CDMA 450) and 410, 450 and 870 MHz PAMR bands

(CDMA-PAMR) covering essential requirements of Neni 3.2 of the R&TTE

Directive

80. EN 301 559-2 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range

Devices (SRD); Low Power Active Medical Implants (LP-AMI) operating in the

frequency range 2 483,5 MHz to 2 500 MHz;Part 2: Harmonized EN covering

the essential requirements of Neni 3.2 of the R&TTE Directive


Stations (MESs) of Geostationary mobile satellite systems, including handheld

earth stations, for Satellite Personal Communications Networks (S-PCN) in the

1,5/1,6 GHz bands under the Mobile Satellite Service (MSS) covering the



Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using

Low Earth Orbiting (LEO) satellites operating below 1 GHz covering essential

requirements under Neni 3.2 of the R&TTE Directive


Mobile Service; Commercially available amateur radio equipment; Part 2:

Harmonized EN covering the essential requirements of Neni 3.2 of the R&TTE

Directive


Harmonized EN for CT1 and CT1+ cordless telephone equipment covering



Harmonized EN for CT2 cordless telephone equipment covering essential



Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and

Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405

MHz; Part 2: Harmonized EN covering essential requirements of Neni 3.2 of the

R&TTE Directive

87. EN 301 840-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital

wireless microphones operating in the CEPT harmonized band 1785 MHz to 1

800 MHz; Part 2: Harmonized EN under Neni 3.2 of the R&TTE Directive

88. EN 301 841-3 V1.1.1 VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and

methods of measurement for ground-based equipment; Part 3: Harmonized EN



ElectroMagnetic Compatibility (EMC) standard for marine radio equipment

and services; Part 1: Common technical requirements

26



and services; Part 1: Common technical requirements



and services; Part 2: Specific conditions for VHF radiotelephone transmitters

and receivers



and services; Part 4: Specific conditions for Narrow-Band Direct-Printing

(NBDP) NAVTEX receivers



and services; Part 5: Specific conditions for MF/HF radiotelephone transmitters

and receivers



and services; Part 6: Specific conditions for Earth Stations on board Vessels

operating in frequency bands above 3 GHz

95. EN 301 893 V1.6.1 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN;


Directive

96. EN 301 893 V1.7.1 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN;


Directive

97. EN 301 908-1 V5.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of

Neni 3.2 of the R&TTE Directive; Part 1: Introduction and common

requirements


Neni 3.2 of the R&TTE Directive; Part 1: Introduction and common

requirements

99. EN 301 908-10 V4.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base

Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-

Generation cellular networks; Part 10: Harmonized EN for IMT-2000,

FDMA/TDMA (DECT) covering essential requirements of Neni 3.2 of the

R&TTE Directive


Neni 3.2 of the R&TTE Directive; Part 11: CDMA Direct Spread (UTRA FDD)

(Repeaters)



Generation cellular networks; Part 12: Harmonized EN for IMT-2000, CDMA

Multi-Carrier (cdma2000) (Repeaters) covering the essential requirements of



Neni 3.2 of the R&TTE Directive; Part 13: Evolved Universal Terrestrial Radio

Access (E-UTRA) User Equipment (UE)

27



Access (E-UTRA) Base Stations (BS)



Access (E-UTRA FDD) (Repeaters)



Generation cellular networks; Part 16: Harmonized EN for IMT-2000, Evolved

CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the




Generation cellular networks; Part 17: Harmonized EN for IMT-2000, Evolved

CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the



Neni 3.2 of the R&TTE Directive; Part 18: E-UTRA, UTRA and GSM/EDGE

Multi-Standard Radio (MSR) Base Station (BS)


Neni 3.2 of the R&TTE Directive;Part 18: E-UTRA, UTRA and GSM/EDGE

Multi-Standard Radio (MSR) Base Station (BS)


Neni 3.2 of the R&TTE Directive; Part 19: OFDMA TDD WMAN (Mobile

WiMAX) TDD User Equipment (UE)



WiMAX) TDD User Equipment (UE)



User Equipment (UE)


Neni 3.2 of the R&TTE Directive;Part 2: CDMA Direct Spread (UTRA FDD)

User Equipment (UE)



WiMAX) TDD Base Stations (BS)



WiMAX) TDD Base Stations (BS)



WiMAX) FDD User Equipment (UE)



WiMAX) FDD Base Stations (BS)


28


Base Stations (BS)


Neni 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier (cdma2000) User

Equipment (UE)

119. EN 301 908-4 V6.2.1 IMT cellular networks;Harmonized EN covering the essential requirements of

Neni 3.2 of the R&TTE Directive;Part 4: CDMA Multi-Carrier (cdma2000) User

Equipment (UE)


Neni 3.2 of the R&TTE Directive; Part 5: CDMA Multi-Carrier (cdma2000) Base

Stations (BS)


Neni 3.2 of the R&TTE Directive; Part 6: CDMA TDD (UTRA TDD) User

Equipment (UE)


Neni 3.2 of the R&TTE Directive; Part 7: CDMA TDD (UTRA TDD) Base

Stations (BS)


Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation cellular

networks; Part 8: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC

136) (UE) covering essential requirements of Neni 3.2 of the R&TTE Directive


Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation cellular

networks; Part 9: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC

136) (BS) covering essential requirements of Neni 3.2 of the R&TTE Directive

125. EN 301 929-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);VHF

transmitters and receivers as Coast Stations for GMDSS and other applications

in the maritime mobile service; Part 2: Harmonized EN under Neni 3.2 of the

R&TTE Directive

126. EN 301 997-2 V1.1.1 Transmission and Multiplexing (TM); Multipoint equipment; Radio equipment

for use in Multimedia Wireless Systems (MWS) in the frequency band 40,5 GHz

to 43,5 GHz; Part 2: Harmonized EN covering essential requirements under



Transmitting equipment for the Amplitude Modulated (AM) sound

broadcasting service; Part 2: Harmonized EN under Neni 3.2 of the R&TTE

Directive


Transmitting equipment for the Frequency Modulated (FM) sound

broadcasting service; Part 2: Harmonized EN under Neni 3.2 of the R&TTE

Directive


Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to

406 MHz frequency range with power levels ranging up to 200 mW; Part 2:

Harmonized EN covering essential requirements under Neni 3.2 of the R&TTE

Directive

130. EN 302 064-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless

29

Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2:

Harmonized EN under Neni 3.2 of the R&TTE Directive

131. EN 302 065 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range

Devices (SRD) using Ultra Wide Band technology (UWB) for communications

purposes; Harmonized EN covering the essential requirements of Neni 3.2 of

the R&TTE Directive

132. EN 302 066-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground-

and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 2:

Harmonized EN covering essential requirements of Neni 3.2 of the R&TTE

Directive


Transmitting equipment for the Terrestrial - Digital Audio Broadcasting (T-

DAB) service; Part 2: Harmonized EN under Neni 3.2 of the R&TTE Directive

134. EN 302 186 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for satellite mobile

Aircraft Earth Stations (AESs)operating in the 11/12/14 GHz frequency bands


135. EN 302 194-2 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation

radar used on inland waterways; Part 2: Harmonized EN covering essential



equipment in the frequency range 9 kHz to 315 kHz for Ultra Low Power

Active Medical Implants (ULP-AMI) and accessories;Part 2: Harmonized EN



Frequency Identification Equipment operating in the band 865 MHz to 868

MHz with power levels up to 2 W; Part 2: Harmonized EN covering the


138. EN 302 217-2-2 V1.3.1 Fixed Radio Systems; Characteristics and requirements for point-to-point

equipment and antennas;Part 2-2: Digital systems operating in frequency bands

where frequency co-ordination is applied;Harmonized EN covering the



equipment and antennas; Part 2-2: Digital systems operating in frequency

bands where frequency co-ordination is applied; Harmonized EN covering the



equipment and antennas; Part 2-2: Digital systems operating in frequency

bands where frequency co-ordination is applied; Harmonized EN covering the


141. EN 302 217-3 V1.3.1 Fixed Radio Systems; Characteristics and requirements for point-to-point

equipment and antennas; Part 3: Equipment operating in frequency bands

where both frequency coordinated or uncoordinated deployment might be

applied; Harmonized EN covering the essential requirements of Neni 3.2 of the

R&TTE Directive

142. EN 302 217-3 V2.1.1 Fixed Radio Systems; Characteristics and requirements for point-to-point

equipment and antennas; Part 3: Equipment operating in frequency bands

where both frequency coordinated or uncoordinated deployment might be

30

applied; Harmonized EN covering the essential requirements of Neni 3.2 of the

R&TTE Directive


equipment and antennas; Part 4-2: Antennas; Harmonized EN covering the



Transmitting equipment for the Digital Radio Mondiale (DRM) broadcasting

service; Part 2: Harmonised EN under Neni 3.2 of the R&TTE Directive

145. EN 302 248 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM);Navigation

radar for use on non-SOLAS vessels;Harmonized EN covering the essential



Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar

equipment operating in the 77 GHz to 81 GHz band; Part 2: Harmonized EN


147. EN 302 288-2 V1.3.2 Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range

Devices; Road Transport and Traffic Telematics (RTTT); Short range radar

equipment operating in the 24 GHz range;Part 2: Harmonized EN covering the



Devices; Road Transport and Traffic Telematics (RTTT); Short range radar

equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the



Devices (SRD); Close Range Inductive Data Communication equipment

operating at 13,56 MHz; Part 2: Harmonised EN under Neni 3.2 of the R&TTE

Directive


Transmitting equipment for the digital television broadcast service, Terrestrial

(DVB-T); Part 2: Harmonized EN covering the essential requirements of Neni



Transmitting equipment for the analogue television broadcasting service;

Harmonized EN under Neni 3.2 of the R&TTE Directive

152. EN 302 326-2 V1.2.2 Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized

EN covering the essential requirements of Neni 3.2 of the R&TTE Directive for

Digital Multipoint Radio Equipment

153. EN 302 326-3 V1.3.1 Fixed Radio Systems; Multipoint Equipment and Antennas; Part 3: Harmonized

EN covering the essential requirements of Neni 3.2 of the R&TTE Directive for

Multipoint Radio Antennas

154. EN 302 340 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for satellite Earth

Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency

bands allocated to the Fixed Satellite Service (FSS) covering essential



Devices (SRD); Equipment for Detection and Movement; Tanks Level Probing

Radar (TLPR) operating in the frequency bands 5,8 GHz, 10 GHz, 25 GHz, 61

31

GHz and 77 GHz; Part 2: Harmonized EN covering the essential requirements



Harmonized EN for CDMA spread spectrum repeaters operating in the 450

MHz cellular band (CDMA450) and the 410, 450 and 870 MHz PAMR bands

(CDMA PAMR) covering essential requirements of Neni 3.2 of the R&TTE

Directive


Devices (SRD); Technical characteristics for SRD equipment using Ultra

WideBand technology (UWB); Building Material Analysis and Classification

equipment applications operating in the frequency band from 2,2 GHz to 8,5

GHz; Part 2: Harmonized EN covering the essential requirements of Neni 3.2 of

the R&TTE Directive

158. EN 302 448 V1.1.1 Satellite Earth Stations and Systems (SES);Harmonized EN for tracking Earth

Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands covering



Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to

1 690 MHz frequency range; Part 2: Harmonized EN covering essential



Harmonized EN for the GSM onboard aircraft system covering the essential



Devices (SRD); Technical characteristics for SRD equipment using Ultra

WideBand technology (UWB); Object Discrimination and Characterization

Applications for power tool devices operating in the frequency band from 2,2

GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of



Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking

equipment operating in the frequency range from 6 GHz to 9 GHz; Part 2:


Directive

163. EN 302 502 V1.2.1 Broadband Radio Access Networks (BRAN); 5,8 GHz fixed broadband data

transmitting systems; Harmonized EN covering the essential requirements of



equipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low Power

Active Medical Membrane Implants and Accessories; Part 2: Harmonized EN



Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz;

Part 2: Harmonized EN covering essential requirements of Neni 3.2 of the

R&TTE Directive


Devices (SRD); Ultra Low Power Medical Data Service Systems operating in the

32

frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Part 2:

Harmonized EN covering essential requirements of Neni 3.2 of the R&TTE

Directive

167. EN 302 544-1 V1.1.2 Broadband Data Transmission Systems operating in the 2 500 MHz to 2 690

MHz frequency band; Part 1: TDD Base Stations; Harmonized EN covering the


168. EN 302 544-2 V1.1.1 Broadband Data Transmission Systems operating in the 2 500 MHz to 2 690

MHz frequency band; Part 2: TDD User Equipment Stations; Harmonized EN


169. EN 302 561 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land

Mobile Service; Radio equipment using constant or non-constant envelope

modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or

150 kHz; Harmonized EN covering essential requirements of Neni 3.2 of the

R&TTE Directive

170. EN 302 567 V1.1.1 Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit

WAS/RLAN Systems; Harmonized EN covering the essential requirements of


171. EN 302 567 V1.2.1 Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit

WAS/RLAN Systems; Harmonized EN covering the essential requirements of


172. EN 302 571 V1.1.1 Intelligent Transport Systems (ITS); Radiocommunications equipment

operating in the 5 855 MHz to 5 925 MHz frequency band;Harmonized EN


173. EN 302 574-1 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized Standard for satellite

earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-

space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 1:

Complementary Ground Component (CGC) for wideband systems:


Directive



space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 2:

User Equipment (UE) for wideband systems: Harmonized EN covering the




space) and 2 170 MHz to 2 200 MHz (space-to- earth) frequency bands; Part 3:

User Equipment (UE) for narrowband systems: Harmonized EN covering the


176. EN 302 608 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range

Devices (SRD); Radio equipment for Eurobalise railway systems;Harmonized


177. EN 302 609 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range

Devices (SRD); Radio equipment for Euroloop railway systems;Harmonized


178. EN 302 617-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground-

based UHF radio transmitters, receivers and transceivers for the UHF

33

aeronautical mobile service using amplitude modulation; Part 2: Harmonized


179. EN 302 623 V1.1.1 Broadband Wireless Access Systems (BWA) in the 3 400 MHz to 3 800 MHz

frequency band; Mobile Terminal Stations; Harmonized EN covering the


180. EN 302 625 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); 5 GHz

BroadBand Disaster Relief applications (BBDR); Harmonized EN covering the


181. EN 302 645 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range

Devices; Global Navigation Satellite Systems (GNSS) Repeaters; Harmonized


182. EN 302 686 V1.1.1 Intelligent Transport Systems (ITS); Radiocommunications equipment

operating in the 63 GHz to 64 GHz frequency band; Harmonized EN covering

the essential requirements of Neni 3.2 of the R&TTE Directive


Devices (SRD); Level Probing Radar (LPR) equipment operating in the

frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz,

75 GHz to 85 GHz; Part 2: Harmonized EN covering the essential requirements


184. EN 302 752 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Active radar

target enhancers; Harmonized EN covering the essential requirements of Neni



frequency band; Base Stations; Harmonized EN covering the essential



frequency band;Base Stations;Harmonized EN covering the essential


187. EN 302 858-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Road

Transport and Traffic Telematics (RTTT); Short range radar equipment

operating in the 24,05 GHz to 24,25 GHz frequency range for automotive

application; Part 2: Harmonized EN covering the essential requirements of




mobile service operating in the VHF bands with integrated handheld class D

DSC; Part 2: Harmonized EN covering the essential requirements of Neni 3.2 of

the R&TTE Directive



mobile service operating in the VHF bands with integrated handheld class D

DSC; Part 3: Harmonized EN covering the essential requirements of Neni 3.3(e)

of the R&TTE Directive

190. EN 302 961-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime

Personal Homing Beacon intended for use on the frequency 121,5 MHz for

search and rescue purposes only; Part 2: Harmonized EN covering the essential


34

191. EN 302 977 V1.1.2 Satellite Earth Stations and Systems (SES); Harmonized EN for Vehicle-

Mounted Earth Stations (VMES) operating in the 14/12 GHz frequency bands

covering the essential requirements of Neni 3.2 of the R&TTE directive


Transmitting equipment for terrestrial mobile TV to provide multimedia

multicast service; Part 1: Harmonized EN covering the essential requirements

of Neni 3.2 of the R&TTE Directive, Common requirements


Transmitting equipment for terrestrial mobile TV to provide multimedia

multicast service; Part 2: Harmonized EN covering the essential requirements

of Neni 3.2 of the R&TTE Directive, Test Arrangements for transmitters

utilizing OFDM technology

194. EN 303 035-1 V1.2.1 Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment

covering essential requirements under Neni 3.2 of the R&TTE directive; Part 1:

Voice plus Data (V+D)

195. EN 303 035-2 V1.2.2 Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment

covering essential requirements under Neni 3.2 of the R&TTE directive; Part 2:

Direct Mode Operation (DMO)

196. EN 303 084 V1.1.1 Ground Based Augmentation System (GBAS) VHF ground-air Data Broadcast

(VDB); Technical characteristics and methods of measurement for ground-

based equipment; Harmonized EN covering the essential requirements of Neni


197. EN 303 213-6-1 V1.1.1 Advanced Surface Movement Guidance and Control System (A-SMGCS); Part

6: Harmonized EN covering the essential requirements of Neni 3.2 of the

R&TTE Directive for deployed surface movement radar sensors; Sub-part 1: X-

band sensors using pulsed signals and transmitting power up to 100 kW

198. EN 303 978 V1.1.2 Satellite Earth Stations and Systems (SES);Harmonized EN for Earth Stations on

Mobile Platforms (ESOMP) transmitting towards satellites in geostationary

orbit in the 27,5 GHz to 30,0 GHz frequency bands covering the essential



Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz

frequency range; Part 2: Harmonized EN covering the essential requirements of


200. ETS 300 487/A1 ED.1 Satellite Earth Stations and Systems (SES); Receive-Only Mobile Earth Stations

(ROMES) operating in the 1,5 GHz band providing data communications;

Radio Frequency (RF) specifications

Technical Committee No. 12 “Metrology and measurements”, 16 standards


1. EN 14154-4:2014 Water meters - Part 4: Additional functionalities

2. EN 13757-1:2014 Communication systems for meters - Part 1: Data exchange

35

3. EN ISO 4375:2014 Hydrometry - Cableway systems for stream gauging (ISO 4375:2014)

4. EN ISO 2538-1:2014 Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and

slopes (ISO 2538-1:2014)

5. EN ISO 2538-2:2014 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and

tolerancing (ISO 2538-2:2014)

6. EN ISO 16610-71:2014 Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal

filters: Gaussian regression filters (ISO 16610-71:2014)

7. ISO 8316:1987 Measurement of liquid flow in closed conduits - Method by collection of the

liquid in a volumetric tank

8. ISO 4369:1979 Measurement of liquid flow in open channels - Moving-boat method

9. ISO 9196:1992 Liquid flow measurement in open channels - Flow measurements under ice

conditions

10. ISO 9555-1:1994 Measurement of liquid flow in open channels - Tracer dilution methods for the

measurement of steady flow - Part 1: General


measurement of steady flow - Part 3: Chemical tracers


measurement of steady flow - Part 4: Fluorescent tracers

13. ISO 649-1:1981 Laboratory glassware - Density hydrometers for general purposes - Part 1:

Specification

14. ISO 649-1:1981 Laboratory glassware - Density hydrometers for general purposes - Part 2: Test

methods and use

15. ISO 4801:1979 Glass alcoholometers and alcohol hydrometers not incorporating a

thermometer

16. ISO 4805:1981 Laboratory glassware - Thermo-alcoholometers and alcohol-

thermohydrometers

Technical Committee No. 19 “Petroleum products, lubricants and related products”, 14 standards


1. EN 15195:2014 Liquid petroleum products - Determination of ignition delay and derived

cetane number (DCN) of middle distillate fuels by combustion in a constant

volume chamber

2. EN 15376:2014 Automotive fuels - Ethanol as a blending component for petrol - Requirements

and test methods

3. EN 1601:2014/AC:2014 Liquid petroleum products - Unleaded petrol - Determination of organic

oxygenate compounds and total organically bound oxygen content by gas

chromatography (O-FID)

4. EN 15502-2-2:2014 Gas-fired central heating boilers - Part 2-2: Specific standard for type B1

appliances

5. EN

14214:2012+A1:2014/AC:2014

Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel

engines and heating applications - Requirements and test methods

6. EN 16576:2014 Automotive fuels - Determination of manganese and iron content in diesel -

36

Inductively coupled plasma optical emission spectrometry (ICP OES) method

7. EN ISO 17824:2014 Petroleum and natural gas industries - Downhole equipment - Sand screens

(ISO 17824:2009)

8. EN ISO 10370:2014 Petroleum products - Determination of carbon residue - Micro method (ISO

10370:2014)

9. EN ISO 5163:2014 Petroleum products - Determination of knock characteristics of motor and

aviation fuels - Motor method (ISO 5163:2014)

10. EN ISO 5164:2014 Petroleum products - Determination of knock characteristics of motor fuels -

Research method (ISO 5164:2014)

11. EN ISO 16559:2014 Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014)

12. CEN/TR 15367-1:2014 Petroleum products - Guidelines for good housekeeping - Part 1: Automotive

diesel fuels

13. CEN/TR 15149-3:2014 Solid biofuels - Determination of particle size distribution - Part 3: Rotary

screen method

14. ISO 349:1975 Hard coal - Audibert-Arnu dilatometer test

Technical Committee No. 47 “Chemistry”, 47 standards


1. EN 13624:2013 Chemical disinfectants and antiseptics - Quantitative suspension test for the

evaluation of fungicidal or yeasticidal activity in the medical area - Test method

and requirements (phase 2, step 1)

2. EN 14476:2013 Chemical disinfectants and antiseptics - Quantitative suspension test for the

evaluation of virucidal activity in the medical area - Test method and

requirements (Phase 2/Step 1)

3. EN 13727:2012+A1:2013 Chemical disinfectants and antiseptics - Quantitative suspension test for the

evaluation of bactericidal activity in the medical area - Test method and

requirements (phase 2, step 1)

4. EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud

5. EN 15280:2013 Evaluation of a.c. corrosion likelihood of buried pipelines applicable to

cathodically protected pipelines

6. EN 12580:2013 Soil improvers and growing media - Determination of a quantity

7. EN 16357:2013 Carbonate liming materials - Determination of reactivity - Automatic titration

method with citric acid

8. EN 16317:2013 Fertilizers - Determination of trace elements - Determination of arsenic by

inductively coupled plasma-atomic emission spectrometry (ICP-AES) after

aqua regia dissolution

9. EN 16319:2013 Fertilizers - Determination of trace elements - Determination of cadmium,

chromium, lead and nickel by inductively coupled plasma-atomic emission

spectrometry (ICP-AES) after aqua regia dissolution

10. EN 16318:2013 Fertilizers - Determination of trace elements - Determination of chromium(VI)

by photometry (method A) and by ion chromatography with

spectrophotometric detection (method B)

37

11. EN 16320:2013 Fertilizers - Determination of trace elements - Determination of mercury by

vapour generation (VG) after aqua regia dissolution

12. EN ISO 6556:2012 Laboratory glassware - Filter flasks (ISO 6556:2012)

13. CEN/TR 16589:2013 Laboratory installations - Capture devices with articulated extract arm

14. EN 16274:2012 Methods for analysis of allergens - Quantification of suspected fragrance

allergens in consumer products - Step 1: GC analysis of ready-to-inject sample

15. CEN ISO/TS 13830:2013 Nanotechnologies - Guidance on voluntary labelling for consumer products

containing manufactured nano-objects (ISO/TS 13830:2013)

16. EN 15493:2007 Candles - Specification for fire safety

17. EN 15494:2007 Candles - Product safety labels

18. EN 15426:2007 Candles - Specification for sooting behaviour

19. EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and

plants against corrosion caused by aggressive media - Part 1: Terminology,

design and preparation of substrate


plants against corrosion caused by aggressive media - Part 2: Coatings on

metallic components


plants against corrosion caused by aggressive media - Part 4: Linings on

metallic components


plants against corrosion caused by aggressive media - Part 5: Linings on

concrete components


plants against corrosion caused by aggressive media - Part 6: Combined linings

with tile and brick layers

24. EN 24946:1990 Determination of copper content in steel and cast iron

25. EN 24943:1990 Chemical analysis of ferrous metal - Determination of copper content - Flame

atomic absorption spectrometric method (ISO 4943:1985)

26. EN 24829-1:1990 Steel and cast iron - Determination of total silicon content - Reduced

molybdosilicate spectrophotometric method - Part 1: Silicon content between

0,05 and 1% (ISO 4829-1:1986)

27. EN 24947:1991 Steel and cast iron - Determination of vanadium content - Potentiometric

titration method (ISO 4947:1986)

28. EN 10315:2006 Routine method for analysis of high alloy steel by X-ray Fluorescence

Spectrometry (XRF) by using a near by technique

29. EN 10177:1989 Chemical analysis of ferrous materials - Determination of calcium in steels -

Flame atomic absorption spectrometric method

30. EN 10178:1989 Chemical analysis of ferrous materials - Determination of niobium in steels -

Spectrophotometric method

31. EN 10181:1989 Chemical analysis of ferrous materials - Determination of lead in steels - Flame

atomic absorption spectrometric method

32. EN 10188:1989 Chemical analysis of ferrous materials - Determination of chromium in steels

and irons - Flame atomic absorption spectrometric method

33. EN 24159:1989 Ferromanganese and ferrosilicomanganese - Determination of manganese

content - Potentiometric method (ISO 4159:1978, ed. 1)

38

34. EN ISO 4934:2003 Steel and iron - Determination of sulfur content - Gravimetric method (ISO

4934:2003)

35. EN 10184:2006 Chemical analysis of ferrous materials - Determination of phosphorus in non-

alloyed steels and irons - Molybdenum blue spectrophotometric method

36. EN 24943:1990/AC:1991 Steel and cast iron - Determination of copper content - Flame atomic absorption

spectrometric method (ISO 4943:1985)

37. EN 24829-2:1990/AC:1991 Steel and cast iron - Determination of total silicon content - Reduced

molybdosilicate spectrophotometric method - Part 2: Silicon content between

0,01 and 0,05% (ISO 4829-2:1988)

38. EN 24946:1990/AC:1991 Steel and cast iron - Determination of copper content - 2,2'diquinolyl

spectrophotometric method (ISO 4946:1984)

39. EN 24159:1989/AC1:1989 Ferromanganese and ferrosilicomanganese - Determination of manganese

content - Potentiometric method (ISO 4159:1978, ed. 1)

40. EN 10351:2011 Chemical analysis of ferrous materials - Inductively coupled plasma optical

emission spectrometric analysis of unalloyed and low alloyed steels -

Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine

method]

41. EN 10355:2013 Chemical analysis of ferrous materials - Inductively coupled plasma optical

emission spectrometric analysis of unalloyed and low alloyed steels -

Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with

nitric and sulphuric acids [Routine method]

42. EN ISO 15351:2010 Steel and iron - Determination of nitrogen content - Thermal conductimetric

method after fusion in a current of inert gas (Routine method) (ISO 15351:1999)

43. CEN/TR 10353:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon -

Determination of Al, Ti and P by inductively coupled plasma optical emission

spectrometry

44. CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon -

Determination of Si and Al by X-ray fluorescence spectrometry

45. EN 10200:2012 Chemical analysis of ferrous materials - Determination of boron in steels -

Spectrophotometric method

46. CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the

accuracy of an analytical method by using Certified Reference Materials

47. EN 10211:2013 Chemical analysis of ferrous materials - Determination of titanium in steels and

cast irons - Flame atomic absorption spectrometric method

Technical Committee No. 51 “Cement and building limes. Gypsum and gypsum based”,

8 standards


1. CEN/TR 16632:2014 Isothermal Conduction Calorimetry (ICC) for the determination of heat of

hydration of cement: State of Art Report and Recommendations

2. CEN/TR 14245:2014 Cement - Guidelines for the application of EN 197-2 Conformity Evaluation

39

3. CEN/TR 16676:2014 Energy losses by industrial door

4. EN 16034:2014 Pedestrian doorsets, industrial, commercial, garage doors and openable

windows - Product standard, performance characteristics - Fire resisting and/or

smoke control characteristics

5. EN 13126-5:2011+A1:2014 Building hardware - Hardware for windows and door height windows -

Requirements and test methods - Part 5: Devices that restrict the opening of

windows and door height windows

6. EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels - Definitions,

requirements and test methods

7. EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test

methods

8. EN 13963:2014 Jointing materials for gypsum boards - Definitions, requirements and test

methods

Technical Committee No. 52 “Safety of toys”, 4 standards


1. CEN/TR 15071:2014 Safety of toys - National translations of warnings and instructions for use in EN

71 series

2. EN 71-1:2014 Safety of toys - Part 1: Mechanical and physical properties

3. EN 71-3:2013+A1:2014 Safety of toys - Part 3: Migration of certain elements

4. EN 1466:2014 Child use and care articles - Carry cots and stands - Safety requirements and

test methods

Technical Committee No. 67 “Ceramic in building. Thermal insulating materials and products.

Refractory products and materials”, 6 standards


1. EN ISO 10545-1:2014 Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:2014)

2.

EN ISO 10545-4:2014

Ceramic tiles - Part 4: Determination of modulus of rupture and breaking

strength (ISO 10545-4:2014)

3.

EN ISO 10545-8:2014

Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-

8:2014)

4.

EN 508-1:2014

Roofing and cladding products from metal sheet - Specification for self-

supporting of steel, aluminium or stainless steel sheet - Part 1: Steel

5.

EN 12326-1:2014

Slate and stone for discontinuous roofing and external cladding - Part 1:

Specifications for slate and carbonate slate

6. EN ISO 10081-4:2014 Classification of dense shaped refractory products - Part 4: Special products

(ISO 10081-4:2014)

40

Technical Committee No. 74 “Flanges and their joints”, 4 standards


1. EN 1514-2:2014 Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral

wound gaskets for use with steel flanges

2. EN 14901:2014 Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of

ductile iron fittings and accessories - Requirements and test methods

3. EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part

7: Stainless steel tubes

4. EN ISO 21809-2:2014 Petroleum and natural gas industries - External coatings for buried or

submerged pipelines used in pipeline transportation systems - Part 2: Single

layer fusion-bonded epoxy coatings (ISO 21809-2:2014)

Technical Committee No. 104 “Concrete and related products. Automation and management in

construction”, 3 standards


1. EN 480-1:2014 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference

concrete and reference mortar for testing

2. EN 16502:2014 Test method for the determination of the degree of soil acidity according to

Baumann-Gully

3. EN 16309:2014+A1:2014 Sustainability of construction works - Assessment of social performance of

buildings - Calculation methodology

Technical Committee No. 114 “Safety of machinery and fire safety”, 43 standards


1. CEN/TR 81-12:2014 Safety rules for the construction and installation of lifts - Basics and

interpretations - Part 12: Use of EN 81-20 and EN 81-50 in specific markets

2. EN 54-3:2014 Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders

3. EN 1570-1:2011+A1:2014 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two

fixed landings

4. CEN ISO/TS 9241-411:2014 Ergonomics of human-system interaction - Part 411: Evaluation methods for the

design of physical input devices (ISO/TS 9241-411:2012)

5. EN 15269-5:2014 Extended application of test results for fire resistance and/or smoke control for

41

door, shutter and openable window assemblies, including their elements of

building hardware - Part 5: Fire resistance of hinged and pivoted metal framed

glazed doorsets and openable windows

6. EN 1365-2:2014 Fire resistance tests for loadbearing elements - Part 2: Floors and roofs

7. EN 13381-1:2014 Test methods for determining the contribution to the fire resistance of

structural members - Part 1: Horizontal protective membranes


structural members - Part 5: Applied protection to concrete/profiled sheet steel

composite member


structural members - Part 2: Vertical protective membranes

10. EN 1366-1:2014 Fire resistance tests for service installations - Part 1: Ventilation ducts

11. EN 1366-12:2014 Fire resistance tests for service installations - Part 12: Non-mechanical fire

barrier for ventilation ductwork

12. EN 13823:2010+A1:2014 Reaction to fire tests for building products - Building products excluding

floorings exposed to the thermal attack by a single burning item

13. EN ISO 6103:2014 Bonded abrasive products - Permissible unbalances of grinding wheels as

delivered - Static testing (ISO 6103:2014)

14. EN 289:2014 Plastics and rubber machines - Compression moulding machines and transfer

moulding machines - Safety requirements

15. EN 415-1:2014 Safety of packaging machines - Part 1: Terminology and classification of

packaging machines and associated equipment

16. EN 13001-2:2014 Crane safety - General design - Part 2: Load actions

17. EN 13001-3-2:2014 Cranes - General design - Part 3-2: Limit states and proof of competence of wire

ropes in reeving systems

18. EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of

wheel/rail contacts

19. EN 16203:2014 Safety of Industrial Trucks - Dynamic tests for verification of lateral stability -

Counterbalanced Trucks

20. EN ISO 3691-5:2014/AC:2014 Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-

propelled trucks (ISO 3691-5:2014)

21. EN 15571:2014 Machines and plants for mining and tooling of natural stone - Safety -

Requirements for surface finishing machines

22. EN 1672-1:2014 Food processing machinery - Basic concepts - Part 1: Safety requirements

23. EN 12043:2014 Food processing machinery - Intermediate provers - Safety and hygiene

requirements

24. EN 15165:2014 Food processing machinery - Forming machines - Safety and hygiene

requirements

25. EN 453:2014 Food processing machinery - Dough mixers - Safety and hygiene requirements

26. EN 454:2014 Food processing machinery - Planetary mixers - Safety and hygiene

requirements

27. EN 12041:2014 Food processing machinery - Moulders - Safety and hygiene requirements

28. EN 12463:2014 Food processing machinery - Filling machines and auxiliary machines - Safety

and hygiene requirements

29. EN 12268:2014 Food processing machinery - Band saw machines - Safety and hygiene

requirements

42

30. EN 13871:2014 Food processing machinery - Cubes cutting machinery - Safety and hygiene

requirements

31. EN 15180:2014 Food processing machinery - Food depositors - Safety and hygiene

requirements

32. EN 694:2014 Fire-fighting hoses - Semi-rigid hoses for fixed systems

33. EN 1947:2014 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps

and vehicles

34. EN 14540:2014 Fire-fighting hoses - Non-percolating layflat hoses for fixed systems

35. EN ISO 9902-1:2001/A2:2014 Textile machinery - Noise test code - Part 1: Common requirements -

Amendment 2 (ISO 9902-1:2001/Amd 2:2014)

36. EN ISO 9902-2:2001/A2:2014 Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning

machinery - Amendment 2 (ISO 9902-2:2001/Amd 2:2014)

37. EN ISO 9902-3:2001/A2:2014 Textile machinery - Noise test code - Part 3: Nonwoven machinery -

Amendment 2 (ISO 9902-3:2001/Amd 2:2014)

38. EN ISO 9902-4:2001/A2:2014 Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope

manufacturing machinery - Amendment 2 (ISO 9902-4:2001/Amd 2:2014)

39. EN ISO 9902-5:2001/A2:2014 Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory

machinery (ISO 9902-5:2001/Amd 2:2014)

40. EN ISO 9902-6:2001/A2:2014 Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery

(ISO 9902-6:2001/Amd 2:2014)

41. EN ISO 9902-7:2001/A2:2014 Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery

(ISO 9902-7:2001/Amd 2:2014)

42. EN 16500:2014 Machines for compacting waste materials or recyclable fractions - Vertical

baling presses - Safety requirements

43. EN 16486:2014 Machines for compacting waste materials or recyclable fractions - Compactors -

Safety requirements

Technical Committee No. 129 “Glass”, 3 standards


1. EN 15755-1:2014 Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions

and requirements

2. ISO 12818:2013 Glass packaging - Standard tolerances for flaconnage

3. ISO 12821:2013 Glass packaging - 26 H 180 crown finish - Dimensions

43

Technical Committee No. 133 “Metals and their alloys”, 22 standards


1. EN ISO 9453:2014 Soft solder alloys - Chemical compositions and forms (ISO 9453:2014)

2. EN ISO 9455-5:2014 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-

5:2014)

3. EN ISO 25980:2014 Health and safety in welding and allied processes - Transparent welding

curtains, strips and screens for arc welding processes (ISO 25980:2014)

4. EN ISO 15614-12:2014 Specification and qualification of welding procedures for metallic materials -

Welding procedure test - Part 12: Spot, seam and projection welding (ISO

15614-12:2014)

5. CEN ISO/TR 16060:2014 Destructive tests on welds in metallic materials - Etchants for macroscopic and

microscopic examination (ISO/TR 16060:2003)

6. CEN/TR 16749:2014 Aluminium and aluminium alloys - Classification of Defects and Imperfections

in High Pressure, Low Pressure and Gravity Die Cast Products

7. EN 16482:2014 Founding - Continuous cast iron bars

8. EN ISO 6509-1:2014 Corrosion of metals and alloys - Determination of dezincification resistance of

copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014)

9. EN ISO 17081:2014 Method of measurement of hydrogen permeation and determination of

hydrogen uptake and transport in metals by an electrochemical technique (ISO

17081:2014)

10. EN ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel

(Hall flowmeter) (ISO 4490:2014)

11. EN ISO 10113:2014 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO

10113:2006, Corrected version 2007-08-01)

12. EN ISO 10275:2014 Metallic materials - Sheet and strip - Determination of tensile strain hardening

exponent (ISO 10275:2007)

13. EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)

14. EN ISO 6506-2:2014 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of

testing machines (ISO 6506-2:2014)

15. EN ISO 6506-3:2014 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks

(ISO 6506-3:2014)

16. EN ISO 6506-4:2014 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO

6506-4:2014)

17. EN ISO 16808:2014 Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve

by means of bulge test with optical measuring systems (ISO 16808:2014)

18. EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels

19. EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished

products, bars, rods, wire, sections and bright products of corrosion resisting

steels for general purposes

20. EN 10088-2:2014 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip

of corrosion resisting steels for general purposes

21. EN ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller

bearing steels (ISO 683-17:2014)

44

22. EN 1559-2:2014 Founding - Technical conditions of delivery - Part 2: Additional requirements

for steel castings

Technical Committee No. 134 “Floor coverings”, 2 standards


1. EN ISO 11378-2:2001 Textile floor coverings - Laboratory soiling tests - Part 2: Drum test (ISO 11378-

2:2001)

2. CEN/TS 14472-1:2003 Resilient, textile and laminate floor coverings - Design, preparation and

installation - Part 1: General

Technical Committee No. 136 “Sports and playgrounds”, 31 standards


1. EN 749:2004/AC:2005 Playing field equipment - Handball goals - Functional and safety requirements,

test methods

2. EN 567:2013 Mountaineering equipment - Rope clamps - Safety requirements and test

methods

3. EN 15151-2:2012 Mountaineering equipment - Braking devices - Part 2: Manual braking devices,

safety requirements and test methods

4. EN 14960:2013 Inflatable play equipment - Safety requirements and test methods

5. EN 926-2:2013 Paragliding equipment - Paragliders - Part 2: Requirements and test methods

for classifying flight safety characteristics

6. CEN/TR 16467:2013 Playground equipment accessible for all children

7. CEN/TR 16396:2012 Playground equipment for children - Replies to requests for interpretation of

EN 1176:2008 and its parts

8. EN 12503-4:2013 Sports mats - Part 4: Determination of shock absorption

9. EN 15649-2:2009+A2:2013 Floating leisure articles for use on and in the water - Part 2: Consumer

information

10. EN 12616:2013 Surfaces for sports areas - Determination of water infiltration rate

11. CEN/TS 16384:2012 Synthetic sport systems - Leaching test

12. EN 12228:2013 Surfaces for sports areas - Determination of joint strength of synthetic surfaces

13. EN 12234:2013 Surfaces for sports areas - Determination of ball roll behavior

14. EN 1648-2:2012 Leisure accommodation vehicles - 12 V direct current extra low voltage

electrical installations - Part 2: Motor caravans

15. EN 1648-1:2012 Leisure accommodation vehicles - 12 V direct current extra low voltage

electrical installations - Part 1: Caravans

16. EN 1647:2012 Leisure accommodation vehicles - Caravan holiday homes - Habitation

requirements relating to health and safety

45

17. EN 1646-1:2012 Leisure accommodation vehicles - Motor caravans - Part 1: Habitation

requirements relating to health and safety

18. EN 13200-6:2012 Spectator facilities - Part 6 : Demountable (temporary) stands

19. EN 16054:2012 BMX bicycles - Safety requirements and test methods

20. CEN/TR 16042:2010 Bicycles - Replies to requests for interpretation of EN 14765

21. CEN/TR 16043:2010 Bicycles - Replies to requests for interpretation of EN 14766

22. EN 15532:2008/AC:2009 Cycles - Terminology

23. EN 15194:2009+A1:2011 Cycles - Electrically power assisted cycles - EPAC Bicycles

24. EN 15918:2011+A1:2013 Cycles - Cycle trailers - Safety requirements and test methods

25. EN 16095:2012 Conservation of cultural property - Condition recording for movable cultural

heritage

26. EN 16096:2012 Conservation of cultural property - Condition survey and report of built

cultural heritage

27. EN 16141:2012 Conservation of cultural heritage - Guidelines for management of

environmental conditions - Open storage facilities: definitions and

characteristics of collection centers dedicated to the preservation and

management of cultural heritage

28. EN 16085:2012 Conservation of Cultural property - Methodology for sampling from materials

of cultural property - General rules

29. EN 16242:2012 Conservation of cultural heritage - Procedures and instruments for measuring

humidity in the air and moisture exchanges between air and cultural property

30. EN 16302:2013 Conservation of cultural heritage - Test methods - Measurement of water

absorption by pipe method

31. EN 16322:2013 Conservation of Cultural Heritage - Test methods - Determination of drying

properties

Technical Committee No. 138 “Non destructive testing”, 1 standard


1. EN ISO 17405:2014 Non-destructive testing - Ultrasonic testing - Technique of testing claddings

produced by welding, rolling and explosion (ISO 17405:2014)

Technical Committee No. 140 “In vitro diagnostic medical devices”, 2 standards


1. EN ISO 19001:2013 In vitro diagnostic medical devices - Information supplied by the manufacturer

with in vitro diagnostic reagents for staining in biology (ISO 19001:2013)

2. EN ISO 15197:2013 In vitro diagnostic test systems - Requirements for blood-glucose monitoring

systems for self-testing in managing diabetes mellitus (ISO 15197:2013)

46

Technical Committee No. 144 “Tractors and machinery for agriculture and forestry”, 23 standards


1. EN 15811:2014 Agricultural machinery - Fixed guards and interlocked guards with or without

guard locking for moving transmission parts (ISO/TS 28923:2012 modified)

2. ISO 3835-1:1976 Equipment for vine cultivation and wine making - Vocabulary





7. ISO 4002-1:1979 Equipment for sowing and planting - Part 1: Concave disks type D1 -

Dimensions

8. ISO 4002-2:1977 Equipment for sowing and planting - Disks - Part 2: Flat disks type D2 with

single bevel - Dimensions

9. ISO 4197:1989 Equipment for working the soil - Hoe blades - Fixing dimensions

10. ISO 5678:1993 Agricultural machinery - Equipment for working the soil - S-tines: main

dimensions and clearance zones

11. ISO 5680:1979 Equipment for working soil - Tines and shovels for cultivators - Main fixing

dimensions

12. ISO 5690-1:1985 Equipment for distributing fertilizers - Test methods - Part 1: Full width

fertilizer distributors

13. ISO 5690-2:1984 Equipment for distributing fertilizers - Test methods - Part 2: Fertilizer

distributors in lines

14. ISO 5691:1981 Equipment for planting - Potato planters - Method of testing

15. ISO 5699:1979 Agricultural machines, implements and equipment - Dimensions for

mechanical loading with bulk goods

16. ISO 5703:1979 Equipment for vine cultivation and wine making - Grape presses - Methods of

test

17. ISO 5704:1980 Equipment for vine cultivation and wine making - Grape-harvesting machinery

- Test methods

18. ISO 5713:1990 Equipment for working the soil - Fixing bolts for soil working elements

19. ISO 6880:1983 Machinery for agriculture - Trailed units of shallow tillage equipment - Main

dimensions and attachment points

20. ISO 7224:1983 Equipment for vine cultivation and wine making - Mash pumps - Methods of

test

21. ISO 7256-1:1984 Sowing equipment - Test methods - Part 1: Single seed drills (precision drills)

22. ISO 7256-2:1984 Sowing equipment - Test methods - Part 2: Seed drills for sowing in lines

23. ISO 8947:1993 Agricultural machinery - Equipment for working the soil - S-tines: test method

47

Technical Committee No. 160 “Personal protective equipments”, 6 standards


1. EN 353-1:2014 Personal fall protection equipment - Guided type fall arresters including an

anchor line - Part 1: Guided type fall arresters including a rigid anchor line

2. EN ISO 20346:2014 Personal protective equipment - Protective footwear (ISO 20346:2014)

3. EN ISO 17249:2013/AC:2014 Safety footwear with resistance to chain saw cutting (ISO 17249:2013)

4. EN 469:2014 Protective clothing for firefighters - Performance requirements for protective

clothing for firefighting

5. EN 16350:2014 Protective gloves - Electrostatic properties

6. EN 13138-1:2014 Buoyant aids for swimming instruction - Part 1: Safety requirements and test

methods for buoyant aids to be worn

Technical Committee No. 172 “Pulp, paper and board”, 2 standards


1. EN ISO 2758:2014 Paper - Determination of bursting strength (ISO 2758:2014)

2. EN ISO 2759:2014 Board - Determination of bursting strength (ISO 2759:2014)

Technical Committee No. 175 “Round and sawn timber”, 35 standards


1. EN 330:2014 Wood preservatives - Determination of the relative protective effectiveness of a

wood preservative for use under a coating and exposed out-of-ground contact -

Field test: L-joint method

2. EN 252:2014 Field test method for determining the relative protective effectiveness of a

wood preservative in ground contact

3. EN 73:2014 Wood preservatives - Accelerated ageing of treated wood prior to biological

testing - Evaporative ageing procedure

4. EN 839:2014 Wood preservatives - Determination of the protective effectiveness against

wood destroying basidiomycetes - Application by surface treatment

5. CEN/TS 16368:2014 Lightweight Particleboards - Specifications

6. EN 326-2:2010+A1:2014 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type

testing and factory production control

7. EN 1870-3:2014 Safety of woodworking machines - Circular sawing machines - Part 3: Down

cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular

saw benches

48

8. EN 16481:2014 Timber stairs - Structural design - Calculation methods

9. EN 16556:2014 Determination of the maximum open time for thermoplastic wood adhesives

for non-structural applications

10. ISO 15821:2007 Doorsets and windows - Water-tightness test under dynamic pressure -

Cyclonic aspects

11. ISO 15822:2007 Test method of doorset opening performance in diagonal deformation - Seismic

aspects

12. ISO 1804:1972 Doors - Terminology

13. ISO 6442:2005 Door leaves - General and local flatness - Measurement method

14. ISO 6443:2005 Door leaves - Method for measurement of height, width, thickness and

squareness

15. ISO 6444:2005 Door leaves - Determination of the behaviour under humidity variations in

successive uniform climates

16. ISO 6445:2005 Doors - Behaviour between two different climates - Test method

17. ISO 6612:1980 Windows and door height windows - Wind resistance tests

18. ISO 6613:1980 Windows and door height windows - Air permeability test

19. ISO 8248:1985 Windows and door height windows - Mechanical tests

20. ISO 8269:1985 Doorsets - Static loading test

21. ISO 8270:1985 Doorsets - Soft heavy body impact test

22. ISO 8271:2005 Door leaves - Determination of the resistance to hard body impact

23. ISO 8272:1985 Doorsets - Air permeability test

24. ISO 8273:1985 Doors and doorsets - Standard atmospheres for testing the performance of

doors and doorsets placed between different climates

25. ISO 8274:2005 Windows and doors - Resistance to repeated opening and closing - Test method

26. ISO 8275:1985 Doorsets - Vertical load test

27. ISO 9379:2005 Operating forces - Test method - Doors

28. ISO 9380:1990 Doorsets - Repeated torsion test

29. ISO 9381:2005 Hinged or pivoted doors - Determination of the resistance to static torsion

30. ISO 19993:2007 Timber structures - Glued laminated timber - Face and edge joint cleavage test

31. ISO 22452:2011 Timber structures - Structural insulated panel walls - Test methods

32. ISO 6891:1983 Timber structures - Joints made with mechanical fasteners - General principles

for the determination of strength and deformation characteristics

33. ISO 8375:2009 Timber structures - Glued laminated timber - Test methods for determination of

physical and mechanical properties

34. ISO 8970:2010 Timber structures - Testing of joints made with mechanical fasteners -

Requirements for wood density

35. ISO 9087:1998 Wood - Determination of nail and screw holding power under axial load

application

49

Technical Committee No. 185 “Fasteners, screws and auxiliary elements”, 3 standards


1. EN ISO 1891-2:2014 Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO

1891-2:2014)

2. EN ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)

3. EN ISO 10664:2014 Hexalobular internal driving feature for bolts and screws (ISO 10664:2014)

Technical Committee No. 206 “Biocompatibility of medical and dental materials and devices”,

4 standards


1. EN 1422:2014 Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and

test methods

2. CEN ISO/TS 16775:2014 Packaging for terminally sterilized medical devices - Guidance on the

application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014)

3. EN ISO 10993-10:2013 Biological evaluation of medical devices - Part 10: Tests for irritation and skin

sensitization (ISO 10993-10:2010)

4. EN 13718-1:2014 Medical vehicles and their equipment - Air ambulances - Part 1: Requirements

for medical devices used in air ambulances

Technical Committee No. 207 “Furniture”, 15 standards


1. EN 131-7:2013 Ladders - Part 7: Mobile ladders with platform

2. EN 834:2013 Heat cost allocators for the determination of the consumption of room heating

radiators - Appliances with electrical energy supply

3. EN 16121:2013 Non-domestic storage furniture - Requirements for safety, strength, durability

and stability

4. EN 16122:2012 Domestic and non-domestic storage furniture - Test methods for the

determination of strength, durability and stability

5. EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic

seating

6. EN 16337:2013 Hardware for furniture - Strength and loading capacity of shelf supports

7. EN 716-1:2008+A1:2013 Furniture - Children's cots and folding cots for domestic use - Part 1: Safety

requirements

50

8. EN 716-2:2008+A1:2013 Furniture - Children's cots and folding cots for domestic use - Part 2: Test

methods

9. EN 16139:2013/AC:2013 Furniture - Strength, durability and safety - Requirements for non-domestic

seating

10. EN 1728:2012/AC:2013 Furniture - Seating - Test methods for the determination of strength and

durability

11. EN 12720:2009+A1:2013 Furniture - Assessment of surface resistance to cold liquids

12. EN 12721:2009+A1:2013 Furniture - Assessment of surface resistance to wet heat

13. EN 12722:2009+A1:2013 Furniture - Assessment of surface resistance to dry heat

14. EN 14988-1:2006+A1:2012 Children's high chairs - Part 1: Safety requirements

15. EN 14988-2:2006+A1:2012 Children's high chairs - Part 2: Test methods

Technical Committee No. 211 “Acoustics”, 2 standards


1. EN ISO 16251-1:2014 Acoustics - Laboratory measurement of the reduction of transmitted impact

noise by floor coverings on a small floor mock-up - Part 1: Heavyweight

compact floor (ISO 16251-1:2014)

2. EN 16487:2014 Acoustics - Test code for suspended ceilings - Sound absorption

Technical Committee No. 218

“Rubber and plastics hoses and piping”, 9 standards


1. CEN/TS 14421:2006 Hose tail and ferrule for crimping and swaging

2. EN 853:1996/AC:2007 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type -

Specification

3. EN ISO 4641:2011 Rubber hoses and hose assemblies for water suction and discharge -

Specification (ISO 4641:2010)

4. EN ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications

- Specification (ISO 6224:2011)

5. EN ISO 28017:2011 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging

applications - Specification (ISO 28017:2011)

6. EN ISO 1825:2011 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling -

Specification (ISO 1825:2010)

7. EN ISO 7751:1997/A1:2011 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst

pressure to maximum working pressure - Amendment 1 - Replacement of

"design working pressure" by "maximum working pressure" throughout text

(ISO 7751:1991/Amd 1:2011)

8. EN 26801:1993/A1:2011 Rubber or plastics hoses - Determination of volumetric expansion -

51

Amendment 1: Deletion of alcohol as pressurizing fluid (ISO 6801:1983/Amd

1:2011)

9. EN ISO 4671:2007/A1:2011 Rubber and plastics hoses and hose assemblies - Methods of measurement of

the dimensions of hoses and the lengths of hose assemblies - Amendment 1:

Clarification of position at which outside diameter is measured (ISO

4671:2007/Amd 1:2011)

Technical Committee No. 224

“Information processing systems”, 27 standards


1. CEN ISO/TS 14441:2013 Health informatics - Security and privacy requirements of EHR systems for use

in conformity assessment (ISO/TS 14441:2013)

2. EN ISO 22600-3:2014 Health informatics - Privilege management and access control - Part 3:

Implementations (ISO 22600-3:2014)

3. EN ISO 22600-1:2014 Health informatics - Privilege management and access control - Part 1:

Overview and policy management (ISO 22600-1:2014)

4. EN ISO 22600-2:2014 Health informatics - Privilege management and access control - Part 2: Formal

models (ISO 22600-2:2014)

5. EN 15713:2009 Secure destruction of confidential material - Code of practice

6. EN ISO 14819-2:2013 Intelligent transport systems - Traffic and travel information messages via

traffic message coding - Part 2: Event and information codes for Radio Data

System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO 14819-

2:2013)

7. EN 16102:2011 Intelligent transport systems - eCall - Operating requirements for third party

support

8. EN ISO 15007-1:2014 Road vehicles - Measurement of driver visual behavior with respect to

transport information and control systems - Part 1: Definitions and parameters

(ISO 15007-1:2014)

9. CEN/TS 16702-1:2014 Electronic fee collection - Secure monitoring for autonomous toll systems - Part

1: Compliance checking

10. CEN ISO/TS 17427:2014 Intelligent transport systems - Cooperative systems - Roles and responsibilities

in the context of cooperative ITS based on architecture(s) for cooperative

systems (ISO/TS 17427:2014)

11. CEN/TR 16742:2014 Intelligent transport systems - Privacy aspects in ITS standards and systems in

Europe

12. CEN/TR 16690:2014 Electronic fee collection - Guidelines for EFC applications based on in-vehicle

ITS stations

13. EN 15509:2014 Electronic fee collection - Interoperability application profile for DSRC

14. EN ISO 17262:2012/AC:2013 Intelligent transport systems - Automatic vehicle and equipment identification -

Numbering and data structures - Technical Corrigendum 1 (ISO 17262:2012/Cor

1:2013)

15. EN ISO 17263:2012/AC:2013 Intelligent transport systems - Automatic vehicle and equipment identification -

System parameters - Technical Corrigendum 1 (ISO 17263:2012/Cor 1:2013)

52

16. EN ISO 11354-1:2011 Advanced automation technologies and their applications - Requirements for

establishing manufacturing enterprise process interoperability - Part 1:

Framework for enterprise interoperability (ISO 11354-1:2011)

17. CEN/TS 15448:2014 Postal services - Open standard interface between image controller and

enrichment devices (OCRs, video coding systems, voting systems)

18. EN 14508:2003+A1:2007 Postal services - Quality of service - Measurement of the transit time of end-to-

end services for single piece non-priority mail and second class mail

19. EN 14534:2003+A1:2007 Postal services - Quality of service - Measurement of the transit time of end-to-

end services for bulk mail

20. EN 14142-1:2011 Postal services - Address databases - Part 1: Components of postal addresses

21. CEN/TR 16706:2014 Postal Services - Quality of Service - Measurement of incorrect delivery -

Feasibility Report

22. EN 16495:2014 Air Traffic Management - Information security for organizations supporting

civil aviation operations

23. EN 419211-1:2014 Protection profiles for secure signature creation device - Part 1: Overview

24. EN 419211-6:2014 Protection profiles for secure signature creation device - Part 6: Extension for

device with key import and trusted channel to signature creation application

25. EN 16656:2014 Information technology - Radio frequency identification for item management -

RFID Emblem (ISO/IEC 29160:2012, modified)

26. EN 16570:2014 Information technology - Notification of RFID - The information sign and

additional information to be provided by operators of RFID application

systems

27. EN 16571:2014 Information technology - RFID privacy impact assessment process

Technical Committee No. 230 “Water, air and soil quality”, 79standards


1. CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for

aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using

photometers

2. EN 14124:2004 Inlet valves for flushing cisterns with internal overflow

3. EN 15096:2008 Devices to prevent pollution by backflow of potable water - Hose Union anti-

vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D -

General technical specification

4. EN 512:1994/A1:2001 Fibre-cement products - Pressure pipes and joints

5. CR 14269:2001 Chemicals used for treatment of water intended for human consumption -

Guidelines for the purchase

6. EN 14664:2004 Chemicals used for treatment of water intended for human consumption - Iron

(III) sulfate, solid

7. EN 15092:2008 Building valves - Inline hot water supply tempering valves - Tests and

requirements

8. EN 1201:2005 Chemicals used for treatment of water intended for human consumption -

Potassium dihydrogen orthophosphate

53


Dipotassium hydrogen orthophosphate


Sodium tripolyphosphate


Sodium polyphosphate


Ammonia solution


Cationic polyacrylamides

14. EN 806-4:2010 Specifications for installations inside buildings conveying water for human

consumption - Part 4: Installation

15. EN 16145:2012 Sanitary tapware - Extractable outlets for sink and basin mixers - General

technical specification

16. EN 14743:2005+A1:2007 Water conditioning equipment inside buildings - Softeners - Requirements for

performance, safety and testing

17. EN 14812:2005+A1:2007 Water conditioning equipment inside buildings - Chemical dosing systems -

Pre-set dosing systems - Requirements for performance, safety and testing

18. EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-

pressure ultraviolet radiators - Requirements for performance, safety and

testing

19. EN 14898:2006+A1:2007 Water conditioning equipment inside buildings - Active media filters -

Requirements for performance, safety and testing

20. EN 15219:2006+A1:2007 Water conditioning equipment inside buildings - Nitrate removal devices -

Requirements for performance, safety and testing

21. EN 15664-2:2010 Influence of metallic materials on water intended for human consumption -

Dynamic rig test for assessment of metal release - Part 2: Test waters

22. EN 15032:2006+A1:2008 Chemicals used for treatment of swimming pool water - Trichloroisocyanuric

acid

23. EN 13753:2009 Products used for treatment of water intended for human consumption -

Granular activated alumina

24. EN 15795:2010 Products used for treatment of water intended for human consumption -

Natural unexpanded aluminosilicates

25. EN 15796:2010 Chemicals used for treatment of swimming pool water - Calcium hypochlorite

26. EN 15975-1:2011 Security of drinking water supply - Guidelines for risk and crisis management -

Part 1: Crisis management


Calcium magnesium carbonate


Magnesium oxide


Ozone

30. EN 13618:2011 Flexible hose assemblies in drinking water installations - Functional

requirements and test methods


Sodium chlorate

54

32. EN 15885:2010 Classification and characteristics of techniques for renovation and repair of

drains and sewers

33. EN 476:2011 General requirements for components used in drains and sewers

34. EN 1123-2:2006+A1:2007 Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with

spigot and socket for waste water systems - Part 2: Dimensions

35. EN 13508-1:2012 Investigation and assessment of drain and sewer systems outside buildings -

Part 1: General Requirements

36. EN 295-3:2012 Vitrified clay pipe systems for drains and sewers - Part 3: Test methods

37. EN 840-1:2012 Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a

capacity up to 400 l for comb lifting devices - Dimensions and design


capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices -

Dimensions and design


capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices

- Dimensions and design


capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide

comb lifting devices - Dimensions and design

41. EN 840-5:2012 Mobile waste and recycling containers - Part 5: Performance requirements and

test methods

42. EN 840-6:2012 Mobile waste and recycling containers - Part 6: Safety and health requirements

43. EN ISO 10870:2012 Water quality - Guidelines for the selection of sampling methods and devices

for benthic macroinvertebrates in fresh waters (ISO 10870:2012)

44. EN ISO 14403-1:2012 Water quality - Determination of total cyanide and free cyanide using flow

analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA)

(ISO 14403-1:2012)

45. EN ISO 14403-2:2012 Water quality - Determination of total cyanide and free cyanide using flow

analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA)

(ISO 14403-2:2012)

46. EN 16101:2012 Water quality - Guidance standard on interlaboratory comparison studies for

ecological assessment

47. EN 16161:2012 Water quality - Guidance on the use of in vivo absorption techniques for the

estimation of chlorophyll-a concentration in marine and fresh water samples

48. EN 16260:2012 Water quality - Visual seabed surveys using remotely operated and/or towed

observation gear for collection of environmental data

49. EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of

surface cleanliness by particle concentration (ISO 14644-9:2012)

50. EN ISO 16000-26:2012 Indoor air - Part 26: Sampling strategy for carbon dioxide (CO2) (ISO 16000-

26:2012)

51. EN ISO 13199:2012 Stationary source emissions - Determination of total volatile organic

compounds (TVOCs) in waste gases from non-combustion processes - Non-

dispersive infrared analyser equipped with catalytic converter (ISO 13199:2012)

52. CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching

test for monoliths at fixed liquid to surface area ratio (L/A) for test portions

with fixed minimum dimensions

55

53. CEN/TS 15863:2012 Characterisation of waste - Leaching behaviour test for basic characterisation -

Dynamic monolithic leaching test with periodic leachant renewal, under fixed

test conditions

54. CEN/TS 15864:2012 Characterisation of waste - Leaching behaviour test for basic characterisation -

Dynamic monolithic leaching test with continuous leachant renewal under

conditions relevant for specified scenario(s)

55. CEN/TR 16363:2012 Characterization of waste - Kinetic testing for assessing acid generation

potential of sulfidic waste from extractive industries

56. CEN/TR 16376:2012 Characterization of waste - Overall guidance document for characterization of

waste from the extractive industries

57. CEN/TR 16365:2012 Characterization of waste - Sampling of waste from extractive industries

58. EN 15875:2011/AC:2012 Characterization of waste - Static test for determination of acid potential and

neutralisation potential of sulfidic waste

59. CEN/TR 15522-2:2012 Oil spill identification - Waterborne petroleum and petroleum products - Part 2:

Analytical methodology and interpretation of results based on GC-FID and GC-

MS low resolution analyses

60. EN 16166:2012 Sludge, treated biowaste and soil - Determination of adsorbable organically

bound halogens (AOX)

61. EN 16167:2012 Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls

(PCB) by gas chromatography with mass selective detection (GC-MS) and gas

chromatography with electron-capture detection (GC-ECD)

62. EN 15933:2012 Sludge, treated biowaste and soil - Determination of pH

63. CEN/TS 16177:2012 Sludge, treated biowaste and soil - Extraction for the determination of

extractable ammonia, nitrate and nitrite

64. EN 16168:2012 Sludge, treated biowaste and soil - Determination of total nitrogen using dry

combustion method

65. EN 16169:2012 Sludge, treated biowaste and soil - Determination of Kjeldahl nitrogen

66. EN 15934:2012 Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction

after determination of dry residue or water content

67. EN 15935:2012 Sludge, treated biowaste, soil and waste - Determination of loss on ignition

68. EN 15936:2012 Sludge, treated biowaste, soil and waste - Determination of total organic carbon

(TOC) by dry combustion

69. CEN/TS 16170:2012 Sludge, treated biowaste and soil - Determination of elements using inductively

coupled plasma optical emission spectrometry (ICP-OES)

70. CEN/TS 16171:2012 Sludge, treated biowaste and soil - Determination of elements using inductively

coupled plasma mass spectrometry (ICP-MS)

71. CEN/TS 16188:2012 Sludge, treated biowaste and soil - Determination of elements in aqua regia and

nitric acid digests - Flame atomic absorption spectrometry method (FAAS)

72. CEN/TS 16182:2012 Sludge treated biowaste and soil - Determination of nonylphenols (NP) and

nonylphenol-mono- and diethoxylates using gas chromatography with mass

selective detection (GC-MS)

73. CEN/TS 16189:2012 Sludge, treated biowaste and soil - Determination of linear alkylbenzene

sulfonates (LAS) by high-performance liquid chromatography (HPLC) with

fluorescence detection (FLD) or mass selective detection (MS)

74. CEN/TS 16183:2012 Sludge, treated biowaste and soil - Determination of selected phthalates using

capillary gas chromatography with mass spectrometric detection (GC-MS)

56

75. CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for

aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using

photometers

76. EN 14124:2004 Inlet valves for flushing cisterns with internal overflow

77. EN 15096:2008 Devices to prevent pollution by backflow of potable water - Hose Union anti-

vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D -

General technical specification

78. EN 512:1994/A1:2001 Fibre-cement products - Pressure pipes and joints

79. CR 14269:2001 Chemicals used for treatment of water intended for human consumption -

Guidelines for the purchase

Technical Committee No. 233 “Biotechnology and microbiology”, 6 standards


1. EN ISO 17516:2014 Cosmetics - Microbiology - Microbiological limits (ISO 17516:2014)

2. ISO 13067:2011 Microbeam analysis - Electron backscatter diffraction - Measurement of average

grain size

3. ISO 15632:2012 Microbeam analysis - Selected instrumental performance parameters for the

specification and checking of energy-dispersive X-ray spectrometers for use in

electron probe microanalysis

4. ISO 22029:2012 Microbeam analysis - EMSA/MAS standard file format for spectral-data

exchange

5. ISO 22309:2011 Microbeam analysis - Quantitative analysis using energy-dispersive

spectrometry (EDS) for elements with an atomic number of 11 (Na) or above

6. ISO 24173:2009 Microbeam analysis - Guidelines for orientation measurement using electron

backscatter diffraction

Technical Committee No. 248 “Textiles and textile products”, 2 standards


1. EN ISO 3758:2012 Textiles - Care labelling code using symbols (ISO 3758:2012)

2. EN ISO 10306:2014 Textiles - Cotton fibres - Evaluation of maturity by the air flow method (ISO

10306:2014)

3. EN ISO 16373-2:2014 Textiles - Dyestuffs - Part 2: General method for the determination of

extractable dyestuffs including allergenic and carcinogenic dyestuffs (method

using pyridine-water) (ISO 16373-2:2014)

57

Technical Committee No. 249 “Plastics”, 34 standards


1. CEN ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions

for pipes (ISO/TR 27165:2012)

2. EN ISO 9080:2012 Plastics piping and ducting systems - Determination of the long-term

hydrostatic strength of thermoplastics materials in pipe form by extrapolation

(ISO 9080:2012)

3. CEN/TS 12666-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage -

Polyethylene (PE) - Part 2: Guidance for the assessment of conformity

4. EN ISO 10147:2012 Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the

degree of crosslinking by determination of the gel content (ISO 10147:2011)

5. CEN/TR 1046:2013 Thermoplastics piping and ducting systems - Systems outside building

structures for the conveyance of water or sewage - Practices for underground

installation

6. EN 1555-3:2010+A1:2012 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -

Part 3: Fittings

7. EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products (ISO

11469:2000)

8. EN ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding

and extrusion materials - Part 1: Designation system and basis for specifications

(ISO 11542-1:2001)

9. EN ISO 4608:1998 Plastics - Homopolymer and copolymer resins of vinyl chloride for general use

- Determination of plasticizer absorption at room temperature (ISO 4608:1998)

10. EN ISO 61:1999 Plastics - Determination of apparent density of moulding material that cannot

be poured from a specified funnel (ISO 61:1976)

11. EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet

Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3:

Specific requirements

12. EN ISO 3582:2000 Flexible cellular polymeric materials - Laboratory assessment of horizontal

burning characteristics of small specimens subjected to a small flame (ISO

3582:2000)

13. EN ISO 180:2000 Plastics - Determination of Izod impact strength (ISO 180:2000)

14. EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part

3: Small plates (ISO 294-3:2002)

15. EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO

2039-1:2001)

16. EN ISO 472:2013 Plastics - Vocabulary (ISO 472:2013)

17. EN 15701:2009 Plastics - Thermoplastic jackets for insulation products for building equipment

and industrial installations - Requirements and test methods

18. EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground

swimming pools - Part 1: Homogenous membranes of nominal thickness equal

to or greater than 0,75 mm

19. EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground

58

swimming pools - Part 2: Reinforced membranes of nominal thickness equal to

or greater than 1,5 mm

20. EN ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-

flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to

time-temperature history and/or moisture (ISO 1133-2:2011)

21. EN ISO 7231:2010 Polymeric materials, cellular, flexible - Determination of air flow value at

constant pressure-drop (ISO 7231:2010)

22. EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)

23. EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles

(ISO 11357-1:2009)

24. EN ISO 11833-1:2012 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and

characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-

1:2012)

25. EN 16245-1:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics

- Part 1: General requirements

26. EN ISO 15791-1:2013 Plastics - Development and use of intermediate-scale fire tests for plastics

products - Part 1: General guidance (ISO 15791-1:2014)

27. EN ISO 17556:2012 Plastics - Determination of the ultimate aerobic biodegradability of plastic

materials in soil by measuring the oxygen demand in a respirometer or the

amount of carbon dioxide evolved (ISO 17556:2012)

28. EN 16296:2012 Imperfections in thermoplastics welded joints - Quality levels

29. EN 13100-4:2012 Non destructive testing of welded joints of thermoplastics semifinished

products - Part 4: High voltage testing

30. CEN/TS 16398:2012 Plastics - Template for reporting and communication of bio-based carbon

content and recovery options of biopolymers and bioplastics - Data sheet

31. EN ISO 11963:2012 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO

11963:2012)

32. EN ISO 1628-1:2009/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using

capillary viscometers - Part 1: General principles - Amendment 1 (ISO 1628-

1:2009/Amd 1:2012)

33. EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination

of properties of crosslinked epoxy resins (ISO 3673-2:2012)

34. EN 438-9:2010+A1:2013 High-pressure decorative laminates (HPL) - Sheets based on thermosetting

resins (Usually called Laminates) - Part 9: Classification and specifications for

alternative core laminates

Technical Committee No. 250 “Structural Eurocodes”, 53 standards


1. EN 13391:2004 Mechanical tests for post-tensioning systems

2. EN 1995-1-1:2004 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and

rules for buildings

3. EN 1997-1:2004 Eurocode 7: Geotechnical design - Part 1: General rules

59

4. EN 1994-1-2:2005 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2:

General rules - Structural fire design

5. EN 1995-1-2:2004 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire

design

6. EN 1996-1-2:2005 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural

fire design

7. EN 1994-2:2005 Eurocode 4 - Design of composite steen and concrete structures - Part 2: General

rules and rules for bridges

8. EN 1995-2:2004 Eurocode 5: Design of timber structures - Part 2: Bridges

9. EN 1998-3:2005 Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment

and retrofitting of buildings

10. EN 1998-6:2005 Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers,

masts and chimneys

11. EN 1994-1-1:2004 Eurocode 4: Design of composite steel and concrete structures - Part 1-1:

General rules and rules for buildings

12. EN 1996-2:2006 Eurocode 6 - Design of masonry structures - Part 2: Design considerations,

selection of materials and execution of masonry

13. EN 1996-3:2006 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation

methods for unreinforced masonry structures

14. EN 1998-4:2006 Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks

and pipelines

15. EN 1999-1-1:2007 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules

16. EN 1999-1-2:2007 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design

17. EN 1997-2:2007 Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing

18. EN 1999-1-3:2007 Eurocode 9: Design of aluminium structures – Part 1-3: Structures susceptible to

fatigue

19. EN 1999-1-4:2007 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural

sheeting

20. EN 1999-1-5:2007 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures

21. CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete - Part 4-1: General

22. CEN/TS 1992-4-2:2009 Design of fastenings for use in concrete - Part 4-2: Headed Fasteners

23. CEN/TS 1992-4-3:2009 Design of fastenings for use in concrete - Part 4-3: Anchor channels

24. CEN/TS 1992-4-4:2009 Design of fastenings for use in concrete - Part 4-4: Post-installed fasteners -

Mechanical systems

25. CEN/TS 1992-4-5:2009 Design of fastenings for use in concrete - Part 4-5: Post-installed fasteners -

Chemical systems

26. EN 1995-1-1:2004/A1:2008 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and

rules for buildings

27. EN 1995-1-1:2004/AC:2006 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and

rules for buildings

28. EN 1994-1-2:2005/AC:2008 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2:


29. EN 1994-2:2005/AC:2008 Eurocode 4 - Design of composite steel and concrete structures - Part 2: General

rules and rules for bridges

30. EN 1999-1-1:2007/A1:2009 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules

31. EN 1994-1-1:2004/AC:2009 Eurocode 4: Design of composite steel and concrete structures - Part 1-1:

60

General rules and rules for buildings

32. EN 1997-1:2004/AC:2009 Eurocode 7: Geotechnical design - Part 1: General rules

33. EN 1995-1-2:2004/AC:2009 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire

design

34. EN 1999-1-2:2007/AC:2009 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design

35. EN 1999-1-4:2007/AC:2009 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural

sheeting

36. EN 1999-1-5:2007/AC:2009 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures

37. EN 1996-2:2006/AC:2009 Eurocode 6 - Design of masonry structures - Part 2: Design considerations,

selection of materials and execution of masonry

38. EN 1996-3:2006/AC:2009 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation

methods for unreinforced masonry structures

39. EN 1996-1-2:2005/AC:2010 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural

fire design

40. EN 1997-2:2007/AC:2010 Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing

41. EN 1999-1-3:2007/A1:2011 Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to

fatigue

42. EN 1999-1-4:2007/A1:2011 Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural

sheeting

43. EN 1998-1:2004/A1:2013 Eurocode 8: Design of structures for earthquake resistance - Part 1: General

rules, seismic actions and rules for buildings

44. EN 1996-1-1:2005+A1:2012 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for

reinforced and unreinforced masonry structures

45. EN 1993-1-1:2005/A1:2014 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for

buildings

46. EN 1994-1-2:2005/A1:2014 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2:


47. EN 1997-1:2004/A1:2013 Eurocode 7: Geotechnical design - Part 1: General rules

48. EN 1999-1-1:2007/A2:2013 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules

49. EN 1991-1-6:2005/AC:2013 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during

execution

50. EN 1991-1-2:2002/AC:2013 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on

structures exposed to fire

51. EN 1998-3:2005/AC:2013 Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment

and retrofitting of buildings

52. EN 1991-1-7:2006/A1:2014 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental

actions

53. EN 1995-1-1:2004/A2:2014 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and

rules for buildings

61

Technical Committee No. 256 “Railway applications”, 11 standards


1. EN 16334:2014 Railway applications - Passenger Alarm System - System requirements

2. EN 16507:2014 Railway applications - Ground based service - Diesel refuelling equipment

3. EN 16207:2014 Railway applications - Braking - Functional and performance criteria of

Magnetic Track Brake systems for use in railway rolling stock

4. EN 16272-6:2014 Railway applications - Track - Noise barriers and related devices acting on

airborne sound propagation - Test method for determining the acoustic

performance - Part 6: Intrinsic characteristics - In situ values of airborne sound

insulation under direct sound field conditions

5. EN 16272-3-2:2014 Railway applications - Track - Noise barriers and related devices acting on

airborne sound propagation - Test method for determining the acoustic

performance - Part 3-2: Normalized railway noise spectrum and single number

ratings for direct field applications

6. EN 15380-5:2014 Railway applications - Classification system for railway vehicles - Part 5:

System Breakdown Structure (SBS)

7. EN 16431:2014 Railway applications - Track - Hollow sleepers and bearers

8. CEN/TS 16635:2014 Railway application - Design for PRM Use - Equipment and Components

onboard Rolling Stock - Toilets

9. EN 13146-1:2012+A1:2014 Railway applications - Track - Test methods for fastening systems - Part 1:

Determination of longitudinal rail restraint

10. EN 13146-4:2012+A1:2014 Railway applications - Track - Test methods for fastening systems - Part 4:

Effect of repeated loading

11. EN 12561-3:2011/AC:2014 Railway applications - Tank wagons - Part 3: Bottom filling and emptying

devices for gases liquefied under pressure

Technical Committee No. 261 “Packaging”, 19 standards


1. CR 1460:1994 Packaging - Energy recovery from used packaging

2. EN ISO 13127:2012 Packaging - Child resistant packaging - Mechanical test methods for reclosable

child resistant packaging systems (ISO 13127:2012)

3. EN 16063:2011 Packaging - Rigid plastic containers - Nomenclature of plastic finishes

4. EN 16210:2013 Transportation loads - Measurement and evaluation of climatic and other loads

- Data acquisition and general requirements for measuring equipment

5. EN 16289:2013 Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish

6. EN ISO 16495:2013 Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish

7. EN ISO 13274:2013 Packaging - Transport packaging for dangerous goods - Test methods (ISO

16495:2013)

62

8. CEN/TR 16353:2012 Packaging - Transport packaging for dangerous goods - Plastics compatibility

testing for packaging and IBCs (ISO 13274:2013)

9. EN 16283:2013 Packaging - Safety guidelines for flexible plastic packaging to minimize the risk

of suffocation to children

10. EN 16284:2013 Packaging - Flexible aluminium tubes - Test method to measure the force to

pierce the membrane

11. EN 16285:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the

adhesive strength of the membrane

12. EN 16291-1:2013 Packaging - Flexible aluminium tubes - Test method to measure the

deformation of the aluminium tube body (Guillotine test)

13. EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass

MCA 2 finish

14. EN 16292:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass

MCA 2 finish

15. EN 16293:2013 Glass packaging - Screw finishes - Depressed threads

16. EN ISO 8611-3:2012 Packaging - Glass Packaging - Deep BVS finishes for still wines

17. EN ISO 8611-1:2012 Pallets for materials handling - Flat pallets - Part 3: Maximum working loads

(ISO 8611-3:2011)

18. EN ISO 8611-2:2012 Pallets for materials handling - Flat pallets - Part 1: Test methods (ISO 8611-

1:2011)

19. EN ISO 13127:2012/AC:2012 Packaging - Child resistant packaging - Mechanical test methods for reclosable

child resistant packaging systems - Technical Corrigendum 1 (ISO

13127:2012/Cor 1:2012)

Technical Committee No. 269 “Heating boilers, gas cylinders and pressure equipments”,

57 standards


1. EN 13445-1:2014 Unfired pressure vessels - Part 1: General

2. EN 13445-1:2014/A1:2014 Unfired pressure vessels - Part 1: General

3. EN 13445-2:2014 Unfired pressure vessels - Part 2: Materials

4. EN 13445-3:2014 Unfired pressure vessels - Part 3: Design

5. EN 13445-4:2014 Unfired pressure vessels - Part 4: Fabrication

6. EN 13445-5:2014 Unfired pressure vessels - Part 5: Inspection and testing

7. EN 13445-6:2014 Unfired pressure vessels - Part 6: Requirements for the design and fabrication

of pressure vessels and pressure parts constructed from spheroidal graphite

cast iron

8. EN 13445-8:2014 Unfired pressure vessels - Part 8: Additional requirements for pressure vessels

of aluminium and aluminium alloys

9. EN 1643:2014 Safety and control devices for gas burners and gas burning appliances - Valve

proving systems for automatic shut-off valves

10. EN 16340:2014 Safety and control devices for burners and appliances burning gaseous or

63

liquid fuels - Combustion product sensing devices

11. EN 12516-1:2014 Industrial valves - Shell design strength - Part 1: Tabulation method for steel

valve shells

12. EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel

valve shells

13. EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve

shells manufactured in metallic materials other than steel

14. EN 203-1:2014 Gas heated catering equipment - Part 1: General safety rules

15. EN 203-2-7:2014 Gas heated catering equipment - Part 2-7: Specific requirements - Salamanders

and rotisseries

16. EN 488:2011+A1:2014 District heating pipes - Preinsulated bonded pipe systems for directly

17. EN 1048:2014 Heat exchangers - Air cooled liquid coolers ('dry coolers') - Test procedures for

establishing the performance

18. EN 327:2014 Heat exchangers - Forced convection air cooled refrigerant condensers - Test

procedures for establishing performance

19. EN 328:2014 Heat exchangers - Forced convection unit air coolers for refrigeration - Test

procedures for establishing the performance

20. EN 442-1:2014 Radiators and convectors - Part 1: Technical specifications and requirements

21. EN 13141-8:2014 Ventilation for buildings - Performance testing of components/products

22. EN 14432:2014 Tanks for the transport of dangerous goods - Tank equipment for the transport

of liquid chemicals and liquefied gases - Product discharge and air inlet valves

23. EN 14433:2014 Tanks for the transport of dangerous goods - Tank equipment for the transport

of liquid chemicals and liquefied gases - Foot valves

24. EN 14116:2012+A1:2014 Tanks for transport of dangerous goods - Digital interface for product

recognition devices for liquid fuels

25. EN ISO 4126-6:2014 Safety devices for protection against excessive pressure - Part 6: Application,

selection and installation of bursting disc safety devices (ISO 4126-6:2014)

26. EN ISO 22975-3:2014 Solar energy - Collector components and materials - Part 3: Absorber surface

durability (ISO 22975-3:2014)

27. EN ISO 6974-5:2014 Natural gas - Determination of composition and associated uncertainty by gas

chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to

C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014)

28. EN ISO 16960:2014 Natural gas - Determination of sulfur compounds - Determination of total

sulfur by oxidative microcoulometry method (ISO 16960:2014)

29. ISO 13325:2003 Tyres - Coast-by methods for measurement of tyre-to-road sound emission

30. ISO 13326:1998 Test methods for measuring tyre uniformity

31. ISO 16392:2007 Tyres - Electrical resistance - Test method for measuring electrical resistance of

tyres on a test rig

32. ISO 18164:2005 Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling

resistance

33. ISO 28580:2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance -

Single point test and correlation of measurement results

34. ISO 3877-1:1997 Tyres, valves and tubes - List of equivalent terms - Part 1: Tyres

35. ISO 3877-2:1997 Tyres, valves and tubes - List of equivalent terms - Part 2: Tyre valves

36. ISO 3877-3:1978 Tyres, valves and tubes - List of equivalent terms - Part 3: Tubes

37. ISO 3877-4:1984 Tyres, valves and tubes - List of equivalent terms - Part 4: Solid tyres

64

38. ISO 4223-1:2002 Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres

39. ISO 4223-1:2002/Amd 1:2011 Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres

40. ISO 4223-2:1991 Definitions of some terms used in the tyre industry - Part 2: Solid tyres

41. ISO 6552:1980 Automatic steam traps - Definition of technical terms

42. ISO 6552:1980/Cor 1:2009 Automatic steam traps - Definition of technical terms

43. ISO 10494:1993 Gas turbines and gas turbine sets - Measurement of emitted airborne noise -

Engineering/survey method

44. ISO 11042-2:1996 Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring

45. ISO 11086:1996 Gas turbines - Vocabulary

46. ISO 19860:2005 Gas turbines - Data acquisition and trend monitoring system requirements for

gas turbine installations

47. ISO 21789:2009 Gas turbine applications - Safety

48. ISO 26382:2010 Cogeneration systems - Technical declarations for planning, evaluation and

procurement

49. ISO 3977-1:1997 Gas turbines - Procurement - Part 1: General introduction and definitions

50. ISO 3977-2:1997 Gas turbines - Procurement - Part 2: Standard reference conditions and ratings

51. ISO 3977-3:2004 Gas turbines - Procurement - Part 3: Design requirements

52. ISO 3977-4:2002 Gas turbines - Procurement - Part 4: Fuels and environment

53. ISO 3977-7:2002 Gas turbines - Procurement - Part 7: Technical information

54. ISO 3977-8:2002 Gas turbines - Procurement - Part 8: Inspection, testing, installation and

commissioning

55. ISO 3977-9:1999 Gas turbines - Procurement - Part 9: Reliability, availability, maintainability and

safety

56. ISO/TR 16377:2012 Further clarification of ISO 28580

57. ISO/TR 29846:2008 Tyres, valves and tubes - kPa/psi equivalencies for inflation pressures

Technical Committee No. 275 “Food product analysis. Containers in contact with food”,

12 standards


1. CEN ISO/TR 6579-3:2014 Microbiology of the food chain - Horizontal method for the detection,

enumeration and serotyping of Salmonella - Part 3: Guidelines for serotyping of

Salmonella spp. (ISO/TR 6579-3:2014)

2. CEN/TR 16699:2014 Foodstuffs - Determination of pesticide residues by GC-MS/MS - Tandem mass

spectrometric parameters

3. EN 13805:2014 Foodstuffs - Determination of trace elements - Pressure digestion

4. CEN/TS 16731:2014 Foodstuffs - Determination of hydride-reactive arsenic compounds in rice by

atomic absorption spectrometry (Hydride-AAS) following acid extraction

5. CEN/TS 16707:2014 Foodstuffs - Methods of analysis for the detection of genetically modified

organisms and derived products - Polymerase chain reaction (PCR) based

screening strategies

6. ISO 16050:2003 Foodstuffs - Determination of aflatoxin B1, and the total content of aflatoxins

65

B1, B2, G1 and G2 in cereals, nuts and derived products - High-performance

liquid chromatographic method

7. ISO 16634-1:2008 Food products - Determination of the total nitrogen content by combustion

according to the Dumas principle and calculation of the crude protein content -

Part 1: Oilseeds and animal feeding stuffs

8. ISO 21570:2005/Cor 1:2006

9. ISO 5498:1981 Agricultural food products - Determination of crude fibre content - General

method

10. ISO 6541:1981 Agricultural food products - Determination of crude fibre content - Modified

Scharrer method

11. ISO 7002:1986 Agricultural food products - Layout for a standard method of sampling from a

lot

12. ISO/AWI 19657 Definition of criteria for a food ingredient to be considered as 'natural' -

Guidelines on technical definitions and criteria for natural food ingredients

Technical Committee No. 286 “Liquefied petroleum gas equipment”, 19 standards


1. EN 15888:2014 Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing

2. EN 16509:2014 Transportable gas cylinders - Non-refillable, small transportable, steel cylinders

of capacities up to and including 120 ml containing compressed or liquefied

gases (compact cylinders) - Design, construction, filling and testing

3. EN 12186:2014 Gas infrastructure - Gas pressure regulating stations for transmission and

distribution - Functional requirements

4. EN 14140:2014 LPG equipment and accessories - Transportable refillable welded steel

cylinders for LPG - Alternative design and construction

5. EN 13175:2014 LPG Equipment and accessories - Specification and testing for Liquefied

Petroleum Gas (LPG) pressure vessel valves and fittings

6. EN 14334:2014 LPG equipment and accessories - Inspection and testing of LPG road tankers

7. EN 12493:2013+A1:2014 LPG equipment and accessories - Welded steel pressure vessels for LPG road

tankers - Design and manufacture

8. EN ISO 14246:2014 Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO

14246:2014)

9. EN ISO 10297:2014 Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014,

Corrected version 2014-11-01)

10. EN ISO 7866:2012/AC:2014 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design,

construction and testing - Technical Corrigendum 1 (ISO 7866:2012/Cor 1:2014)

11. CEN/TR 14473:2014 Transportable gas cylinders - Porous materials for acetylene cylinders

12. ISO 6790:1986 Equipment for fire protection and fire fighting - Graphical symbols for fire

protection plans - Specification

13. ISO 8421-1:1987 Fire protection - Vocabulary - Part 1: General terms and phenomena of fire

14. ISO 8421-2:1987 Fire protection - Vocabulary - Part 2: Structural fire protection

15. ISO 8421-3:1989 Fire protection - Vocabulary - Part 3: Fire detection and alarm

66

16. ISO 8421-4:1990 Fire protection - Vocabulary - Part 4: Fire extinction equipment

17. ISO 8421-5:1988 Fire protection - Vocabulary - Part 5: Smoke control

18. ISO 8421-6:1987 Fire protection - Vocabulary - Part 6: Evacuation and means of escape

19. ISO 8421-7:1987 Fire protection - Vocabulary - Part 7: Explosion detection and suppression

means

Technical Committee No. 288 “Execution of special geotechnical works”, 2 standards


1. EN ISO 17892-1:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 1:

Determination of water content (ISO 17892-1:2014)

2. EN ISO 17892-2:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 2:

Determination of bulk density (ISO 17892-2:2014)

Technical Committee No. 298 “Pigments and varnishes”, 35 standards


1. EN 13900-6:2012 Pigments and extenders - Methods of dispersion and assessment of

dispersability in plastics - Part 6: Determination by film test

2. EN ISO 4623-2:2004 Paints and varnishes - Determination of resistance to filiform corrosion - Part 2:

Aluminium substrates (ISO 4623-2:2003)

3. EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass

distribution of polymers using size-exclusion chromatography - Part 5: Method

using light-scattering detection (ISO 16014-5:2012)

4. EN ISO 2409:2013 Paints and varnishes - Cross-cut test (ISO 2409:2013)

5. EN ISO 4628-8:2012 Paints and varnishes - Evaluation of degradation of coatings - Designation of

quantity and size of defects, and of intensity of uniform changes in appearance

- Part 8: Assessment of degree of delamination and corrosion around a scribe or

other artificial defect (ISO 4628-8:2012)

6. EN ISO 20566:2013 Paints and varnishes - Determination of the scratch resistance of a coating

system using a laboratory-scale car-wash (ISO 20566:2013)

7. EN 16402:2013 Paints and varnishes - Assessment of emissions of substances from coatings

into indoor air - Sampling, conditioning and testing

8. EN 927-3:2012 Paints and varnishes - Coating materials and coating systems for exterior wood

- Part 3: Natural weathering test

9. EN ISO 3233-1:2013 Paints and varnishes - Determination of the percentage volume of non-volatile

matter - Part 1: Method using a coated test panel to determine non-volatile

matter and to determine dry film density by the Archimedes principle (ISO

3233-1:2013)

67

10. EN ISO 9038:2013 Determination of sustained combustibility of liquids (ISO 9038:2013)

11. EN ISO 9117-5:2012 Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO

9117-5:2012)

12. EN ISO 9117-4:2012 Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder

(ISO 9117-4:2012)

13. EN ISO 13076:2012 Paints and varnishes - Lighting and procedure for visual assessments of

coatings (ISO 13076:2012)

14. EN ISO 2812-3:2012 Paints and varnishes - Determination of resistance to liquids - Part 3: Method

using an absorbent medium (ISO 2812-3:2012)

15. EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions

- Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)

16. EN ISO 1524:2013 Paints, varnishes and printing inks - Determination of fineness of grind (ISO

1524:2013)

17. EN ISO 9117-6:2012 Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012)

18. EN ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO

15528:2013)

19. EN ISO 16474-2:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2:

Xenon-arc lamps (ISO 16474-2:2013)


Fluorescent UV lamps (ISO 16474-3:2013)

21. EN ISO 20567-3:2012 Paints and varnishes - Determination of stone-chip resistance of coatings - Part

3: Single-impact test with a free-flying impact body (ISO 20567-3:2012)

22. EN 13438:2013 Paints and varnishes - Powder organic coatings for hot dip galvanised or

sherardised steel products for construction purposes

23. EN ISO 13129:2012 Paints and varnishes - Electrochemical measurement of the protection provided

to steel by paint coatings - Current interrupter (CI) technique, relaxation

voltammetry (RV) technique and DC transient (DCT) measurements (ISO

13129:2012)

24. EN ISO 15091:2012 Paints and varnishes - Determination of electrical conductivity and resistance

(ISO 15091:2012)

25. EN ISO 15110:2013 Paints and varnishes - Artificial weathering including acidic deposition (ISO

15110:2013)

26. EN ISO 15184:2012 Paints and varnishes - Determination of film hardness by pencil test (ISO

15184:2012)

27. EN ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for

colour measurement (ISO 13632:2012)


General guidance (ISO 16474-1:2013)

29. CEN/TS 16358:2012 Paints and varnishes - Coating materials and coating systems for exterior wood

- Assessment of air inclusions/microfoam in coating films


- Assessment of knot staining resistance of wood coatings


- Assessment of film extensibility by indentation of a coating on a wooden

substrate


68

- Assessment of tannin staining


- Resistance to blocking of paints and varnishes on wood

34. EN ISO 11664-3:2013 Colorimetry - Part 3: CIE tristimulus values (ISO 11664-3:2012)

35. EN ISO 11890-2:2013 Paints and varnishes - Determination of volatile organic compound (VOC)

content - Part 2: Gas-chromatographic method (ISO 11890-2:2013)

Technical Committee No. 302 “Milk, meet and their products”, 7 standards


1. EN ISO 11816-1:2013 Milk and milk products - Determination of alkaline phosphatase activity - Part

1: Fluorimetric method for milk and milk-based drinks (ISO 11816-1:2013)

2. EN ISO 8968-1:2014 Milk and milk products - Determination of nitrogen content - Part 1: Kjeldahl

principle and crude protein calculation (ISO 8968-1:2014)

3. EN ISO 5534:2004/AC:2013 Cheese and processed cheese - Determination of the total solids content

(Reference method) - Technical Corrigendum 1 (ISO 5534:2004/Cor 1:2013)

4. EN ISO 16297:2014 Milk - Bacterial count - Protocol for the evaluation of alternative methods (ISO

16297:2013)

5. ISO 12875:2011 Traceability of finfish products - Specification on the information to be recorded

in captured finfish distribution chains

6. ISO 12877:2011 Traceability of finfish products - Specification on the information to be recorded

in farmed finfish distribution chains

7. ISO 12878:2012 Environmental monitoring of the impacts from marine finfish farms on soft

bottom

Technical Committee No. 304 “Documentation and information”, 14 standards


1. EN 16425:2014 Simple Publishing Interface

2. EN ISO 19101-1:2014 Geographic information - Reference model - Part 1: Fundamentals (ISO 19101-

1:2014)

3. EN ISO 3952-1:1994/A1:2004 Kinematic diagrams - Graphical symbols - Part 1: Amendment 1 (ISO 3952-

1:1981/Amd 1:2002)

4. EN ISO 7010:2012/A1:2014 Graphical symbols - Safety colours and safety signs - Registered safety signs

(ISO 7010:2011/Amd 1:2012)


(ISO 7010:2011/Amd 2:2012)


(ISO 7010:2011/Amd 3:2012)

69


8. EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part

1: Country codes (ISO 3166-1:2013)

9. EN ISO/IEC 19788-5:2014 Information technology - Learning, education and training - Metadata for

learning resources - Part 5: Educational elements (ISO/IEC 19788-5:2012)

10. CWA 15660:2007 Providing good practice for E-Learning quality approaches

11. CWA 15661:2007 Providing E-Learning supplies transparency profiles

12. CWA 15903:2008 Metadata for Learning Opportunities (MLO) - Advertising

13. CWA 16076:2010 ECTS Information Package/Course Catalogue MLO Application Profile

14. CWA 16133:2010 Guidelines on a European Learner Mobility model

Technical Committee No. 305 “Potentially explosive atmospheres. Explosion prevention and

protection”, 3 standards


1. EN 16264:2014 Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder

actuated tools

2. EN 16447:2014 Explosion isolation flap valves

3. EN 1127-2:2014 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic

concepts and methodology for mining

Technical Committee No. 307 “Food oils and fats. Oilseeds”, 7 standards


1. EN ISO 12966-1:2014 Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl

esters - Part 1: Guidelines on modern gas chromatography of fatty acid methyl

esters (ISO 12966-1:2014)

2. EN ISO 12228-1:2014 Determination of individual and total sterols contents - Gas chromatographic

method - Part 1: Animal and vegetable fats and oils (ISO 12228-1:2014)

3. EN ISO 12228-2:2014 Determination of individual and total sterols contents - Gas chromatographic

method - Part 2: Olive and olive pomace oils (ISO 12228-2:2014)

4. EN ISO 5555:2001/A1:2014 Animal and vegetable fats and oils - Sampling - Amendment 1: Flexitanks (ISO

5555:2001/Amd 1:2014)

5. ISO 5498:1981 Agricultural food products - Determination of crude fibre content - General

method

6. ISO 6541:1981 Agricultural food products - Determination of crude fibre content - Modified

Scharrer method

7. ISO 7002:1986 Agricultural food products - Layout for a standard method of sampling from a

lot

70

Technical Committee No. 309 “Footwear and leather”, 1 standard


1. EN ISO 16177:2012 Footwear - Resistance to crack initiation and growth - Belt flex method (ISO

16177:2012)

Technical Committee No. 320 “Transport. Logistics and services”, 91 standards


1. EN 12312-14:2014 Aircraft ground support equipment - Specific requirements - Part 14:

Disabled/incapacitated passenger boarding vehicles

2. EN ISO 18541-1:2014 Road vehicles - Standardized access to automotive repair and maintenance

information (RMI) - Part 1: General information and use case definition (ISO

18541-1:2014)


information (RMI) - Part 2: Technical requirements (ISO 18541-2:2014)


information (RMI) - Part 3: Functional user interface requirements (ISO 18541-

3:2014)

5. EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure

and/or inflation / deflation of tyres for motor vehicles - Metrology,

requirements and testing

6. EN 16352:2013 Logistics - Specifications for reporting crime incidents

7. CEN/TR 16412:2012 Supply chain security (SCS) - Good practice guide for small and medium

8. EN ISO 6185-3:2014 Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor

rating of 15 kW and greater (ISO 6185-3:2014)

9. EN ISO 12215-

5:2008/A1:2014

Small craft - Hull construction and scantlings - Part 5: Design pressures for

monohulls, design stresses, scantlings determination - Amendment 1 (ISO

12215-5:2008/Amd 1:2014)

10. EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of

tubes

11. EN 3417:2012 Aerospace series - Rivets, solid, universal head, in nickel base alloy NI-P11,

metric series

12. EN 4608-003:2012 Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore

assembly, screened (braided) and jacketed - Operating temperatures between -

65 °C and 260 °C - Part 003: DN family - Lightweight - UV Laser printable -

Product standard

13. EN 3724:2004 Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in

titanium alloy TI-P64001, MoS2 coated - Strength Class: 1 100 MPa (at ambient

temperature)

71

14. EN 4644-002:2012 Aerospace series - Connector, electrical and optical, rectangular, modular,

rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part

002: Specification of performance and contact arrangements



001: Technical specification

16. EN 4677-001:2012 Aerospace series - Welded and brazed assemblies for aerospace construction -

Joints of metallic materials by electron beam welding - Part 001: Quality of

welded assemblies

17. EN 4632-004:2012 Aerospace series - Weldability and brazeability of materials in aerospace

constructions - Part 004: Welding and brazing of homogeneous assemblies of

high alloyed steels

18. EN 9300-003:2012 Aerospace series - LOTAR - Long term archiving and retrieval of digital

technical product documentation such as 3D, CAD and PDM data - Part 003:

Fundamentals and concepts

19. EN 3155-076:2012 Aerospace series - Electrical contacts used in elements of connection - Part 076:

Contacts, electrical, male, type A, crimp, class R - Product standard


Contacts, electrical, female, type A, crimp, class R - Product standard

21. EN 9137:2012 Quality management systems - Guidance for the Application of AQAP 2110

within an EN 9100 Quality Management System



142: Size 4 receptacle for rack and panel application - Product standard

23. EN 4268:2012 Aerospace series - Metallic materials - Heat treatment facilities - General

requirements

24. EN 4050-1:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of

bars, plates, forging stock and forgings - Part 1: General requirements


bars, plates, forging stock and forgings - Part 2: Performance of test


bars, plates, forging stock and forgings - Part 3: Reference blocks


bars, plates, forging stock and forgings - Part 4: Acceptance criteria

28. EN 2997-002:2012 Aerospace series - Connectors, electrical, circular, coupled by threaded ring,

fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C

continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of

performance and contact arrangements

29. EN 3475-505:2012 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505:

Tensile test on conductors and strands

30. EN 3375-002:2012 Aerospace series - Cable, electrical, for digital data transmission - Part 002:

General

31. EN 6059-503:2012 Aerospace series - Electrical cables, installation - Protection sleeves - Test

methods - Part 503: Temperature rise due to rated current injected on the sleeve

32. EN 4608-005:2012 Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore

assembly, screened (braided) and jacketed - Operating temperatures between -

72

65 °C and 260 °C - Part 005: DW family - Lightweight two-core gauge 24 for

data transmission - UV laser printable - Product standard

33. EN 4531-003:2012 Aerospace series - Connectors, optical, circular, single and multipin, coupled by

triple start threaded ring - Flush contacts - Part 003: Square flange receptacle -

Product standard


triple start threaded ring - Flush contacts - Part 004: Jam nut receptacle -

Product standard


triple start threaded ring - Flush contacts - Part 005: Plug - Product standard

36. EN 2245:2012 Aerospace series - Pipelines for liquids and gases - Definitions

37. EN 4443:2012 Aerospace series - Nuts, elliptical clinch, self-locking, MJ threads, in heat

resisting steel FE-PA2601 (A286), MoS2 coated, Classification: 900 MPa (at

ambient temperature)/ 425 °C

38. EN 3278:2012 Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting

steel, passivated (0,25 mm wall thickness)

39. EN 3706:2012 Aerospace series - Headless threaded plugs, cross recess, in aluminium alloy

5086

40. EN 3707:2012 Aerospace series - Headless threaded plugs - Installation holes

41. EN 3768:2012 Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series,

with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100

MPa (at ambient temperature)/315 °C

42. EN 4611-002:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore

assembly - XLETFE Family - Part 002: General


assembly - XLETFE Family - Part 003: Tin plated copper - Operating

temperatures, between -65 °C and 135 °C - Single extruded wall for enclosed

applications - UV laser printable - Product standard


assembly - XLETFE Family - Part 004: Tin plated copper - Operating

temperatures, between –65 °C and 135 °C - Dual extruded wall for open



assembly - XLETFE Family - Part 005: Silver plated copper — Operating

temperatures, between –65 °C and 150 °C - Single extruded wall for enclosed



assembly - XLETFE Family - Part 006: Silver plated copper - Operating




assembly - XLETFE Family - Part 007: Nickel plated copper - Operating




assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating

73


applications with additional protection in areas of high vibration, cable flexing

and fluid contamination - UV laser printable - Product standard


assembly - XLETFE Family - Part 009: BJ - Nickel plated copper - Operating

temperatures, between –65 °C and 150 °C - Single extruded wall for use as cable

cores or within equipment in areas of high vibration, cable flexing and fluid

contamination - UV laser printable - Product standard


triple start threaded ring - Flush contacts - Part 002: Specification of

performance and contact arrangements


triple start threaded ring - Flush contacts - Part 101: Optical contact for EN

4641-100 cable - 55 °C to 125 °C - Product standard


triple start threaded ring - Flush contacts - Part 901: Filler plugs - Product

standard


Contacts, electrical, triaxial, size 08, female, type D, crimp, class R - Product

standard

54. EN 3373-007:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric

conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on

nickel plated aluminium cable for inch series studs - Product standard

55. EN 3373-008:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric

conductors - Part 008: Copper lugs nickel plated ring shaped for copper

conductors nickel plated for inch series studs up to 340 °C - Product standard


triple start threaded ring - Flush contacts - Part 001: Technical specification

57. EN 6049-006:2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-

aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post

installation - Product standard

58. EN 6049-007:2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-

aramid fibres - Part 007: Self-wrapping mechanical and electrical protective

sleeve, flexible post installation operating temperature from - 55 °C to 260 °C -

Product standard

59. EN 2311:2012 Aerospace series - Bushes with self-lubricating liner - Technical specification

60. EN 4704:2012 Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and

aluminium wrought alloys for corrosion protection and paint pre-treatment

(TSA)

61. EN 3745-301:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part

301: Attenuation

62. EN 4687:2012 Aerospace series - Paints and varnishes - Chromate free non corrosion

inhibiting two components cold curing primer for military application

63. EN 4688:2012 Aerospace series - Paints and varnishes - Corrosion inhibiting two components

cold curing primer for military application

64. EN 4689:2012 Aerospace series - Paints and varnishes - Two components cold curing

74

polyurethane finish - High flexibility and chemical agent resistance for military

application



continuous, 200 °C continuous, 260 °C peak - Part 003: Square flange receptacle

- Product standard



continuous, 200 °C continuous, 260 °C peak - Part 005: Hermetic square flange

receptacle - Product standard

67. EN 4681-001:2012 Aerospace series - Cables, electric, general purpose, with conductors in

aluminium or copper-clad aluminium - Part 001: Technical specification

68. EN 4681-002:2012 Aerospace series - Cables, electric, general purpose, with conductors in

aluminium or copper-clad aluminium - Part 002: General

69. EN 2267-002:2012 Aerospace series - Cables, electrical, for general purpose - Operating

temperatures between - 55 °C and 260 °C - Part 002: General

70. EN 2714-002:2012 Aerospace series - Cables, electrical, single and multicore for general purpose -

Operating temperatures between - 55 °C and 260 °C - Part 002: Screened and

jacketed - General

71. EN 2591-214:2012 Aerospace series - Elements of electrical and optical connection - Test methods -

Part 214: Lightning strike, current and voltage pulse

72. EN 4817:2012 Aerospace series - Passive UHF RFID tags intended for aircraft use

73. EN 4818:2012 Aerospace series - Passive HF RFID tags intended for aircraft use

74. EN 4819:2012 Aerospace series - Contact Memory Button (CMB) tags intended for aircraft use

75. EN 3682-003:2012 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,

interchangeable insert type, rack to panel, operating temperature 150 °C

continuous - Part 003: Inserts - Product standard

76. EN 4697:2012 Aerospace series - General and installation requirements for passenger seat

fittings


Part 307: Salt mist


Part 402: Shock


Part 403: Sinusoidal and random vibration


405: Low/High temperature bend test


510: Bending test


515: Buffer insertion force


516: Severe cable bend test


517: Cable tie clamping test

85. EN 3456:2012 Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and

75

strip, hot rolled - a ≤ 6 mm

86. EN 3464:2012 Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate - 6 mm < a ≤ 100

mm

87. EN 3682-004:2012 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,

interchangeable insert type, rack to panel, operating temperature 150 °C

continuous - Part 004: Size 2 receptacle - Product standard

88. EN 4500-001:2012 Aerospace series - Metallic materials - Rules for drafting and presentation of

material standards - Part 001: General rules


material standards - Part 003: Specific rules for heat resisting alloys


material standards - Part 004: Specific rules for titanium and titanium alloys


material standards - Part 005: Specific rules for steels

Technical Committee No. 336 “Bituminous binders. Road materials”, 11 standards


1. EN 12592:2014 Bitumen and bituminous binders - Determination of solubility

2. EN 12607-3:2014 Bitumen and bituminous binders - Determination of the resistance to hardening

under influence of heat and air - Part 3: RFT method


under influence of heat and air - Part 2: TFOT method

4. EN 12594:2014 Bitumen and bituminous binders - Preparation of test samples

5. EN 12595:2014 Bitumen and bituminous binders - Determination of kinematic viscosity


under influence of heat and air - Part 1: RTFOT method

7. EN 12596:2014 Bitumen and bituminous binders - Determination of dynamic viscosity by

vacuum capillary

8. EN 12697-43:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to

fuel

9. CEN/TS 15901-15:2014 Road and airfield surface characteristics - Part 15: Procedure for determining

the skid resistance of a pavement surface using a device with longitudinal

controlled slip (LFCI): The IMAG

10. CEN/TS 13286-54:2014 Unbound and hydraulically bound mixtures - Part 54: Test method for the

determination of frost susceptibility - Resistance to freezing and thawing of

hydraulically bound mixtures

11. CEN/TS 12633:2014 Method of polishing specimens prior to the measurement of slip and skid

resistance

76

Technical Committee No. 360 “Fresh fruit and vegetables”, 12 standards


1. EN ISO 11747:2012 Rice - Determination of rice kernel resistance to extrusion after cooking (ISO

11747:2012)

2. EN 16378:2013 Cereals - Determination of impurities content in maize (Zea mays, L.) and

sorghum (Sorghum bicolor, L.)

3. CEN/TR 16324:2012 Technical report of the interlaboratory study for the determination of Besatz in

common wheat, rye and durum wheat

4. EN 15587:2008+A1:2013 Cereals and cereal products - Determination of Besatz in wheat (Triticum

aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and

feed barley (Hordeum vulgare L.)

5. CEN/TS 16640:2014 Bio-based products - Determination of the bio based carbon content of products

using the radiocarbon method

6. CEN/TR 16721:2014 Bio-based products - Overview of methods to determine the bio-based content

7. EN 16575:2014 Bio-based products - Vocabulary

8. EN ISO 9235:2013 Aromatic natural raw materials - Vocabulary (ISO 9235:2013)

9. EN 16466-1:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 1: 2H-NMR analysis of

acetic acid

10. EN 16466-2:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 2: 13C-IRMS analysis

of acetic acid

11. EN 16466-3:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 3: 18O-IRMS analysis

of water in wine vinegar

12. EN ISO 927:2009/AC:2012 Spices and condiments - Determination of extraneous matter and foreign matter

content - Technical Corrigendum 1 (ISO 927:2009/Cor 1:2012)