Wood Section

8/2/2019 Wood Section

1/28

Alder Lumber

Grown on the west coast between Alaska andSouthern California Alder is commerciallyharvested in the moist regions of western Oregonand Washington. This Birch relative is fine-textured and light weight. The grain pattern issimilar to Birch, Cherry and Soft Maple; it can alsobe finished to blend with Walnut or Mahogany.

Ash Lumber

Best known for its stability and impact resistanceAsh lumber is widely used for ball bats, hockey sticksand tool handles. Ash is also well suited for furnitureuse and remains a popular wood for kitchencabinets. The heartwood ranges from tan to darkbrown and the sapwood will run white to off-white.

Basswood Lumber

Basswood can be found throughout most of theeastern United States and is one of the softesthardwood species in commercial use. Noted forfine, even grain its exceptionally stable.Heartwood is very light brown and the sapwood isnearly white. While its ideal for carving andturning Basswood is also used for picture framemouldings, wood novelties and other objects requiring a clean looking,light colored wood.

Beech LumberBeech is hard, heavy and strong. Its well suited forflooring, furniture and food containers. Beechaccepts stains and finishes well and can be used asan alternative to Hard Maple although darker in colorand slightly more coarse in texture. Heartwood runspale brown to reddish brown and the sapwood isusually distinct and light colored.

Birch Lumber

Birch is especially popular for furniture, fixtures,cabinetry and doors. The heartwood is cream or lightbrown and the sapwood is a yellowish white. Lumbercan also be sorted for White Birch (all sapwood oneface) or Red Birch (all heartwood one face). Birch ismoderately heavy, hard and strong.

Aromatic Cedar Lumber

The spicy cedar-like smell makes this specie widelyrecognized. Most commonly used in closets, storagecabinets and chests the lumber will have a white to creamcolored sapwood with light brown to red heartwood.Aromatic Cedar lumber is graded No. 1 Common and willhave 3-4 average widths and run 5-6 long.

Cherry Lumber

Cherry is considered one of the premier Americancabinet wood species. Its a fine-grained, hard and strongwood. Cherry can be finished to glass-like smoothnessand is exceptionally stable. Small gum pockets are anormal characteristic. Heartwood lumber will appearreddish-brown and the sapwood will be a lighter yellowbrown color.

Cypress Lumber

Lightweight, fine-grained and easily worked Cypress is used for millwork,cabinets, wall paneling, and furniture. It holds paint well and is resistant tochemicals, dampness and insects. Cypress lumber is light orange/brownin color.

Ref# Grade Thickness Ripped

44ALD superior surfaced straight line

44ALDC cabinet surfaced no


44ASH FAS 1 face & better surfaced straight line

84ASHNS FAS 1 face & better surfaced 1 no

Ref# Grade Thickness Ripped44BW select & better surfaced straight line

44BW1C #1 common surfaced straight line

44BW1CHH #1 common surfaced straight line

44BW78 select & better surfaced straight line

84BW select & better surfaced 1 straight line

84BWR select & better rough no


44BEECH select & 1 face better

44EB superior surfaced straight line


44BCH select & better surfaced straight line

84BCHR select & better rough no

White Birch

44BCHS select & better surfaced straight line


44ARC #1 common surfaced no

44ARCR #1 common rough no

Ref# Grade Surface Thickness Ripped44CH1C #1 common surfaced straight Line

44CH select & better surfaced straight line

44CH78 select & better surfaced straight line

44CHR select & 1 face better rough no

54CHR select & better rough no

64CHNS select & 1 face better surfaced 1 no


84CHNS select & 1 face better surfaced 1 no



44CYP select surfaced straight line

44CYPR select rough no


2/28

Hickory Lumber

Hickory is the hardest, heaviest and strongestAmerican wood. The heartwood is pale to reddishbrown and the sapwood is white. The grain is straightbut can be wavy or irregular and the texture is coarse.Most commonly used for furniture, cabinetry andflooring.

Hickory and Pecan are members of the Walnut family

and are so closely related that individual specimensof Hickory and Pecan cannot be identified with any certainty.

Mahogany Lumber

The heartwood of mahogany is pale brown or pink to dark reddish brown.

The grain is straight and the growth rings are distinct. Texture is mediumand uniform. Mahogany is easy to work and produces very good results inall operations. Most commonly used in furniture, cabinets and flooring.

Soft Maple Lumber

Soft maple heartwood varies from light to darkreddish brown and the sapwood is greyish white.The wood glues, screws, and nails satisfactory. Itsgrain is usually straight and can be stained to anexcellent finish. It is good for steam-bending and islow in stiffness and shock resistance.

Hard Maple Lumber

Hard maple heartwood varies from light to darkreddish brown and its sapwood creamy white with a

slight reddish brown tinge. The wood is hard andheavy with good strength properties. The wood hasa close fine, uniform texture and is generally straight-grained, but it can also occur as curly, fiddleback,and birds-eye figure. Hard maple screws and gluessatisfactory but pre-boring is recommended fornailing. Most commonly used for furniture, kitchen cabinets, butcherblocks, ballroom and gymnasium floor.


44HIC FAS 1 face & better surfaced straight line


African Mahogany

44AMAH FAS surfaced straight line

54AMAH FAS surfaced 1 no

64AMAH FAS surfaced 1 no84AMAH FAS surfaced 1 no

Genuine Mahogany

44HMAH FAS surfaced straight line

44HMAHPG FAS surfaced straight line

44HMAHPGR FAS -pattern rough no

44HMAHR FAS rough no

54HMAHPGR FAS -pattern rough no



84HMAHPGR FAS-pattern rough no



44SMAPS34 select & better surfaced straight line

44SMAPPT paint surfaced straight line

44SMAP select & better surfaced straight line

44SMAPPG paint rough no

44SMAP78 select & 1 face better surfaced straight line

44SMAP1516 select & better surfaced straight line

44SMAPR select & 1 face better rough no

54SMAPR select & better rough no

84SMAPNS select & 1 face better rough no

84SMAPR select & better rough no


44HMAP select & better surfaced straight line

44HMAP58NS select & better surfaced no

44HMAPPG paint surfaced straight line

44HMAPR select & better rough no

54HMAPR select & 1 face better rough no

64HMAPR select & better rough no

84HMAPR select & 1 face better rough no

84HMAPNS select & better surfaced 1 no

Curly Hard Maple

44CMAP pulled to figure surfaced straight line

Pacific Coast Maple

44PCMAP select & better surfaced straight line

Birdseye Maple

44BMAPR select & better rough no


3/28

Red Oak Lumber

Red Oak heartwood is a pinkish reddish brownand the sapwood is white to light brown. Thewood is hard and heavy, with medium bendingstrength. The grain is mostly straight andcourse textured. Pre-boring is recommendedwhen nailing and screwing. Red oak can bestained to a good finish and a wide range of

finish tones can be used.

White Oak Lumber

The name White Oak is a misnomer becausethe wood is not actually white in color butrather tan or light brown. The hard and heavywood is very good for steam bending and hasgreat wear resistance. The grain is mostlystraight and has a medium course texture. Itstains to a good finish and a wide range of

finish tones can be used.

Furniture Grade Pine Lumber

The sapwood of pine is white to pale yellow andthe heartwood is cream to light brown. Thewood is very workable when it comes to nailing,

gluing, sanding, and carving. Paint, stain orvarnish can be applied to a good finish. Tightsound knots are admitted without limit infurniture grade.

Pine Shelving

Pines sapwood is white to pale yellow and the heartwood is cream to lightbrown. The wood can be stained, varnished or painted to a good finish.When it comes to building shelves, pine is not only strong but very durabletoo. Pine shelving come in a variety of sizes but the standard is 12.


Red Oak

44RO FAS 1 face & better surfaced straight line

44RO10+ FAS 1 face & better surfaced straight line

44RO1516 FAS 1 face & better surfaced straight line

44RO1516NS FAS 1 face & better surfaced no

44RO1516X8 FAS 1 face & better surfaced gang

44RO1C #1 common rough no

44RO78 FAS 1 face & better surfaced straight line

44ROR FAS 1 face & better rough no

54RONAR FAS 1 face & better surfaced 1 straight line


54RONS FAS 1 face & better surfaced no

64RONS FAS 1 face & better surfaced 1 no64ROR FAS 1 face & better rough no

84RO FAS 1 face & better surfaced 1 straight line

84RONS FAS 1 face & better surfaced 1 no


Northern Appalachian Red Oak

44RONA FAS 1 face & better surfaced straight line

44RONA1C #1 common surfaced straight line

Red Oak Pink Color

44ROP FAS 1 face & better surfaced straight line

Quarter Sawn Red Oak

44ROQTRS select & better surfaced straight line

Rift Red Oak

44RORIFTR select & better rough no

Red Oak Wheat Color

44ROW FAS 1 face & better surfaced straight line


White Oak

44WO FAS 1 face & better surfaced straight line

54WOR FAS 1 face & better rough no

84WONS FAS 1 face & better surfaced 1 no

84WOR FAS 1 face & better rough no

Quarter Sawn White Oak

44WOQTRS FAS 1 face & better surfaced straight line


Eastern White Pine

44FGEP furniture surfaced straight line

44FGEP1516 furniture surfaced straight line

84FGEP furniture rough no

Ref# Grade Size

Ponderosa Pine

1122PP #2 common 1x12

1123PP #3 common 1x12

Sugar Pine

1122SP #2 common 12


4/28

Poplar Lumber

Poplar heartwood is pale yellowish brown to olivegreen and the sapwood is creamy white. Withexposure to light the olive green color heartwoodwill turn to brown. The medium density wood hasexcellent strength and stability. The grain isstraight and the texture is medium to fine. Poplarcan be painted and stained to an excellent finish.

Wide widths and long lengths are more abundantin this than almost any other domestic species.

Walnut Lumber

Walnut heartwood is light brown to dark chocolatebrown and the sapwood is creamy white. The grainis generally straight but can be wavy or curly. Itnails, glues, and screws well and can be stained to

an exceptional finish. Walnut is a tough hardwoodof medium density and is good for steam bending.Most commonly used for furniture, cabinets, doorsand flooring.

Surfaced 4 Sides Lumber

Dont have time or the equipment to runthe lumber through the planer for asmooth surface? Then our S4S stock(surfaced four sides) might be a solution.Available in a wide variety of sizes,thickness and species.


44POP FAS & 1 face better surfaced straight Line

44POP10+ FAS & 1 face better surfaced straight Line

44POP1C #1 Common surfaced straight Line

44POP34 FAS & 1 face better surfaced straight Line

44POP78 FAS & 1 face better surfaced straight Line44POPR FAS & 1 face better rough no

54POP FAS & 1 face better surfaced 1 straight Line

54POPR FAS & 1 face better rough no


64POPNS FAS & 1 face better surfaced 1 no



84POPNS FAS & 1 face better surfaced 1 no



44WAL FAS 1 face & better surfaced straight Line

64WALR FAS 1 face & better rough no

84WALR FAS 1 face & better rough no

Ref# Nominal Size Actual Thickness Actual Width

Alder

AL18S4S 1 X 8 7

Cherry

CHE16S4S 1 X 6 5

Hickory

HIC16S4S 1 X 6 5

Knotty Pine

KP16S4S 1 X 6 5

Hard Maple

HM16S4S 1 X 6 5

Soft Maple

MAP16S4S 1 X 6 5

MAP18S4S 1 X 8 7

Poplar

POP110S4S 1 X 10 9

POP112S4S 1 X 12 11

POP16S4S 1 X 6 5

POP18S4S 1 X 8 7

Red Oak

12RO X

34RO X

RO112S4S 1 X 12 11

RO16S4S 1 X 6 5

RO18S4S 1 X 8 7

RO24S4S 2 X 4 1 3

RO26S4S 2 X 6 1 5

RO28S4S 2 X 8 1 5

RO110S4S 1 X 10 9

Walnut

W16S4S 1 X 6 5


5/28

Faceplate

Face Frame cabinets are the most commonly builtcabinet style in the United States. To help yousave time in construction we offer the ready toassemble components. These S4S products comein a variety of species, sizes and are shipped inrandom lengths.

All items are 3/4 thick

Ref# Width

Alder

ALFP10* 10

ALFP125 1

ALFP2 2

ALFP225 2

ALFP325 3

ALFP4 4

ALFP425 4

ALFP525 5

ALFP625 6

Basswood

BWFP15 1

BWFIRRING 1

BWFP2 2

Cherry

CFP2 2

Maple

MFP10 10

MFP125 1

MFP2 2

MFP225 2

MFP325 3

MFP425 4

MFP525 5

MFP625 6

PoplarPOPFP10 10

POPFP125 1

POPFP15 1

POPFP2 2

POPFP225 2

POPFP325 3

POPFP425 4

POPFP525 5

POPFP625 6

Red Oak

ROFP10 10

ROFP125 1

ROFP15 1

ROFP2 2ROFP225 2

ROFP25 2

ROFP3 3

ROFP325 3

ROFP35 3

ROFP4 4

ROFP425 4

ROFP525 5

ROFP625 6

Ref# Width


6/28

Hardwood Plywood Core OptionsMost of our hardwood plywood inventory is Veneer, MDF or Particleboardconstruction. These are the most commonly used substrates. There arehowever alternative options available. Please contact your salesrepresentative for pricing and availability.

Veneer Core - Made up of wood veneer inner plies (usually Poplar),Veneer core is light in weight and offers good strength and stability. The

drawback is that thickness variance can be +0 / -3/64; this is the HPVAindustry standard specification. Veneer core remains the most popularoption because of the all wood construction and light weightcharacteristics.

Particleboard (PBC) - This is the least expensive of the core options.PBC offers a smooth, void-free surface for veneer lay-up. PBC providestight thickness tolerances but is heavy; a 3/4 panel can weigh as much as100lbs. PBC has the least amount of structural strength compared toother cores and is subject to the greatest amount of expansion if exposedto moisture.

Medium Density Fiberboard (MDF) - MDF offers great stability and isthe least likely to react when subjected to a measurable change inenvironment. It offers a very smooth, void-free surface for veneer lay-up.MDF has greater strength and screw holding properties than PBC. LikePBC however, MDF is one of the heavier core options. This core isespecially well suited for thin panel applications such as door inserts andpaneling.

Woodstalk - This composite core is manufactured from wheat-straw.There is no added formaldehyde in the raw materials or the resin used tobond the core. It offers a very smooth and void free surface. ColumbiaForest Products uses a no added formaldehyde glue line to bond theveneers to the core. Woodstalk with veneer overlay is offered exclusivelythrough Columbia Forest Products.

Classic Core I - Constructed of veneer core inner plies with PBC cross-bands. It offers similar strength and stability to veneer core but has thevoid-free surface quality of PBC. Excellent substrate for the thin slicedwoods and even rotary woods, reducing the potential for core transfer.This core tends to offer more consistent tolerances than standard veneercore.

Classic Core II - Similar to Classic Core I except the cross band is MDFrather than PBC. Columbia introduced this core in response to customersissues with the potential for chip out with Classic Core I.

Jaycore - The two biggest issues end-uses have had with veneer core inrecent years are thickness variation and core transfer. As a result,Columbia introduced a panel which addresses both of these challenges.Jaycore is a calibrated platform. The core is sent through a size sanderbefore laminating the face and back veneers. With Jaycore, voids are

repaired in crossbands.

Jay-Classic IV - This is the Best of all possible cores. Originallyengineered for a large OEM, this core has a thinner MDF crossband thanClassic Core II, thus an overall increased volume of veneer inner plies. Italso weighs less than other Classic Core options. When you examine theprofile of this panel it is very difficult to see the composite line. The corecomes with a 2-step sanded blank which offers tighter thicknesstolerances than standard veneer cores. Jay-Classic IV is the best coreoffered in terms of strength, stability, surface quality and thicknesstolerance.

Types of Veneer CutsThe manner in which a log segment is cut with relation to the annual ringswill determine the appearance of the veneer. The principal methods ofslicing veneers are Rotary, Plain Slicing (or Flat Slicing), Quarter Slicing(or Quarter Cut), and Rift Slicing (or Rift Cut).

Rotary

The log is centeredmounted on a lathe andpeeled along the generalpath of the growth rings likeunwinding a roll of paper,providing a generally boldrandom appearance. Rotarycut veneers may vary inwidth and matching atveneer joints is extremelydifficult. The only way in

which a whole piece faceveneer can be cut.

Plain Sliced

This slicing method is most oftenused to product veneers for highquality architecturalwoodworking. Slicing is doneparallel to a line through thecenter of the log. A combinationof cathedral and straight grainpatterns results, with a naturalprogression of pattern.


7/28

Matching Between Adjacent Veneer SegmentsIt is possible to achieve certain visual effects by the manner in whichveneer pieces are arranged. Rotary Cut veneers are usually whole pieceface, but if spliced, they are difficult to match. As a result, most matching isdone with sliced veneers. The most common types of matching are Book,Slip, and Random.

Book Matching

The most commonly used match in the industry. Every other piece ofveneer is turned over so adjacent pieces are opened like the pages of abook.

Slip Matching

Often used with quarter slicing and rift sliced veneers. Adjoining pieces

are placed (slipped out) in sequence without turning, resulting in all thesame face sides being exposed.

Random Matching

Veneer pieces are placed next to each other in a random order andorientation, producing a board-by-board effect in many species.

Rift Slicing

Rift veneers are produced mostoften in Red and White Oak, rarelyin other species. Note that riftveneers and rift sawn solid lumberare produced so differently that amatch between the two is highlyunlikely. In both cases the cuttingis done slightly off the radius linesminimizing the flake associatedwith quarter slicing.

Quarter Slicing

Quarter slicing simulates the quartersawing process of solid lumber,roughly parallel to a radius line throughthe log segment. In many species theindividual veneer segments are narrowas a result. A series of stripes isproduced, varying in density andthickness from species to species.Flake is a characteristic of thismethod in Red and White Oak.


8/28

Guide to Hardwood Plywood GradesWere proud to offer our customers one of the most diverse plywoodofferings in the industry. But unlike laminate, veneer plywood in everygrade has defects. The number and size of the defects will determinethe grade.

What we present here is a representative guide to each grade. Pleasenote that each species is subject to specific grade rules. Please consultyour sales representative for further information.

Face Grades A B C D

Birch, Ash, Maple, and Poplar: Rotary Cut, Quarter Cut, Plain Sliced

Pin Knots and SmallBurls, Comb. Avg.

10 -

4 can be1/4

16 -

8 can be1/4

No Limit No Limit

Conspicuous Burls,Max.

3/8 1/2 No Limit No Limit

Sound and RepairedKnots in Comb.

No 4 8 10

Repaired Knots No 4 to 1/8 4 to 1/2 5 to 3/4

Mineral Streak Slight Yes Yes Yes

Vine Slight Yes Yes Yes

Rough cut No Slight Two 8

Areas

5% of

PanelBlended RepairedTapering HairlineSplits

Two

1/16x6

Four

1/8x8

Four

3/16x8

Six

1/4x10

Face Grades A B C D

Red and White Oak; Rotary Cut, Quarter Cut, Plain Sliced

Pin Knots and SmallBurls, Comb. Avg.

12 -

10 can be1/4

24 -

16 can be1/4

No Limit No Limit

Sound and RepairedKnots in Comb.

No 4 8 10

Repaired Knots No 4 to 1/8 4 to 1/2 5 to 3/4

Mineral Streak Slight Few to 8 Yes to 12 Yes

Sap 5% Up to 20% Yes Yes

Blended Repaired

Tapering HairlineSplits

Two

1/16x6

Four

1/8x8

Four

3/16x8

Six

1/4x10

Back Grades 1 2 3 4

Sound Tight Knots 16

up to 3/8

16

up to 3/4

Max 16

1/2-1-1/2

Yes

Knotholes No AllRepaired

All 3/8with 10 upto 1

Up to 4

Repaired Knots No 8

up to 1/2

No No

Sound Tight Burls Yes Yes Yes Yes

Mineral/Sap Yes/Yes Yes/Yes Yes/Yes Yes/Yes

Rough Cut Two 8Dia. Areas

Yes Yes Yes

Splits or Joints Six

1/8x12Repaired

Six

3/16x12

Repaired

3/8x1/4

LOP

1 x 1/4LOP, 1/2to 1/2LOP, 1/4

to full LOP

Veneer Selection Select Veneer is composed entirely of heartwood or sapwood and ismatched for grain, pattern and color.

Uniform Veneer is also composed entirely of heartwood or sapwood,but is matched for color only.

Natural Veneer is composed of both heartwood and sapwood and isgenerally less expensive than select or uniform veneers

Paint Grade Veneer has a smooth enough finish so none of the wood

grain characteristics show through the paint. Stain Grade Veneer is meant to take a clear or tinted stain and still showthe natural characteristics of the wood.

Shop GradeShop Grade plywood is available in every species on an accumulatedbasis. When the mill has produced enough shop in a specific specieswere able to offer the product at a discount.Shop Grade plywood is the result of a manufacturing defect; press faults,veneer overlap, core gaps/laps, splice lines, sand thru, etc. Each sheetshould allow 85% yield however.Shop is produced in one of two ways; Falldown or Manufactured. Falldown

panels have been downgraded during the manufacturing process whileManufactured Shop is produced to be Shop from designated veneers.

Face Grade ApplicationsAA - The best quality face grade for high end use such as architecturalpaneling, doors, and cabinets, case goods and quality furniture.

A - Where AA is not required but excellent appearance is very importantas in cabinets and furniture.

B - Where the natural characteristics and appearance of the species are

desirable.C and D - Provide sound surfaces but allow unlimited color variation.Should be used in applications where the surface will be hidden or a morenatural appearance is desired.


9/28

COLUMBIA FOREST PRODUCTS

Alder Plywood

Alder has a color ranging from white to pinkish brown. The pattern is fine textured. Popular choice for cabinet and furniture of all types.


Ash Plywoods

Ash is similar to oak with its prominent, open grain. Its heartwood is light tan to brown in color and its sapwood is creamy white.


Birch Plywood

Rotary cut Birch is the most popular hardwood plywood. Available in select, uniform and natural veneers, birch ranges in color from cream to light brown.Adaptable as a paint or stain grade panel, top quality birch plywood is used for cabinets in many kitchens and in fine furniture. Lower grade panels areoften used for shelving and industrial furniture products.

Ref# Thickness Grade Cut Core Size

14ALDA4PS A-4 Plain Sliced Veneer 4 x 8

14ALDB4 B-4 Plain Sliced Veneer 4 x 8

34ALDA1PS A-1 Plain Sliced Veneer 4 x 8


34AA1N A-1 Rotary Veneer 4 x 8

34AA1N1 A-1 Rotary, Whole Piece Face Veneer 4 x 8

34AA1PS A-1 Select White Plain Sliced Veneer 4 x 8

14AG1SN B-4 Rotary Veneer 4 x 8

14AG1SPS B-4 Plain Sliced Veneer 4 x 8


18BG1S B-4 Rotary Veneer 4 x 8

14BB2W1FCBEAD B-2 Uniform White Rotary, Whole Piece Face, Beaded MDF 4 x 8

14BB2N1 B-2 Rotary, Whole Piece Face Veneer 4 x 8

14BB2NPBC B-2 Rotary Particle Board 4 x 8

14BEADBIR B-4 Rotary, Beaded MDF 4 x 8

14BB2W1 B-2 Uniform White Rotary, Whole Piece Face Veneer 4 x 8

14BB2W1FC B-2 Uniform White Rotary, Whole Piece Face MDF 4 x 8

14BG1S B-4 Rotary Veneer 4 x 8

14BG2SFC

B-2 Rotary MDF 4 x 814BREDG1S B-4 Red Rotary Veneer 4 x 8

14BC4W1 C-4 Even Tone Rotary, Whole Piece Face Veneer 4 x 8

14BREDC21FC C-2 Red Rotary, Whole Piece Face MDF 4 x 8

14BSH Shop Rotary Veneer 4 x 8

12BB2N B-2 Rotary Veneer 4 x 8


12BB2N1FC B-2 Rotary, Whole Piece Face MDF 4 x 8


12BREDB1FC B-1 Red Rotary MDF 4 x 8


10/28


Aromatic Cedar Plywood

Cedar has a sapwood that is nearly white and its heartwood is purplish to rose-red, matures to dull red or reddish brown. The pattern is straight grainedand fine textured. Cedar is most common in gift ware, furniture and cabinetwork.


12BREDB2 B-2 Red Rotary Veneer 4 x 8


12BD3 D-3 Rotary Veneer 4 x 8




34BA1N A-1 Rotary Veneer 4 x 8

34BA1N1 A-1 Rotary, Whole Piece Face Veneer 4 x 8

34BA1N1PB A-1 Rotary, Whole Piece Face Particle Board 4 x 8

34BA1NFC A-1 Rotary MDF 4 x 8

34BA1W1PF9 A-1 Select White Rotary, Whole Piece Face 9-Ply Veneer 4 x 8

34BREDA1 A-1 Red Rotary Veneer 4 x 8

34BREDA11 A-1 Red Rotary, Whole Piece Face Veneer 4 x 8

3410BN B-2 Rotary Veneer 4 x 10

3458BB2NFC B-2 Rotary MDF 5 x 8





34BB4NFC

B-4 Rotary MDF 4 x 834BREDB2 B-2 Red Rotary Veneer 4 x 8

34BREDB2FC B-2 Red Rotary MDF 4 x 8

34BREDBB B-B Red Rotary Veneer 4 x 8

34BC3N1 C-3 Rotary, Whole Piece Face Veneer 4 x 8


58BMSH Shop Rotary Veneer 4 x 8

34BD31 D-3 Rotary, Whole Piece Face Veneer 4 x 8


1BB2N1 1 B-2 Rotary, Whole Piece Face Veneer 4 x 8

1BD3 1 D-3 Rotary Veneer 4 x 8


14ARCG1S B-4 Plain Sliced Veneer 4 x 8

34AACEDAR A-A Plain Sliced Veneer 4 x 8



11/28


Cherry Plywood

A beautiful close grained wood traditionally used in fine furniture. Its heartwood color ranges from light to medium reddish brown. Transparent finishesbring out the incredibly rich luster. This elegant species is one that will darken with age and sunlight.


Hickory-Pecan Plywood

Hickory-Pecan is moderately heavy and hard. These extremely tough and resilient hardwoods are virtually impossible to tell apart. Its heartwood colorranges from creamy to pinkish brown, with dark streaks. The pattern is straight and close-grained.


14CHA1PSPBC A-1 Plain Sliced Particle Board 4 x 8

14CHA2PSPBC A-2 Plain Sliced Particle Board 4 x 8

14CHB1PSFC B-1 Plain Sliced MDF 4 x 8


14CHG1S B-2 Plain Sliced Veneer 4 x 8

14CHB2PSFCBEAD B-2 Plain Sliced, Beaded MDF 4 x 8

14CHG2S B-4 Plain Sliced Veneer 4 x 8

12CHB2PS B-2 Plain Sliced Veneer 4 x 8


1210CHB2PSFC B-2 Plain Sliced face with Rotary Cutback

MDF 4 x 10

34CHA1PS A-1 Plain Sliced Veneer 4 x 8

34CHA1PSFC A-1 Plain Sliced MDF 4 x 8

34CHA1PSFCSMN A-1 Plain Sliced, Sequence Matched &Numbered

MDF 4 x 8

3410CHA1PS A-1 Plain Sliced Veneer 4 x 10

3410CHB1PS B-1 Plain Sliced Veneer 4 x 1034CHB2PSPB B-2 Plain Sliced Particle Board 4 x 8

34CHB2PS B-2 Plain Sliced Veneer 4 x 8



34CHSH Shop Rotary Veneer 4 x 8

1CHB1PS 1 B-1 Plain Sliced Veneer 4 x 8


14HB2PS B-2 Plain Sliced Veneer 4 x 8

14HB2PSFC B-2 Plain Sliced MDF 4 x 8

14HG1S B-4 Plain Sliced Veneer 4 x 8

34HA1PS A-1 Plain Sliced Veneer 4 x 8


12/28


Mahogany Plywood

Mahogany has a firm open grain, rich warm appearance with excellent stability and decay resistance. Colors vary from light red to yellowish tan to a richgolden brown to dark red.


Maple Plywood

Pleasing, tight grained pattern suitable as both a stain and paint grade panel. Often used in combination with birch in cabinets and other fixtures. Colorranges from near white to reddish brown.


Genuine Mahogany

14HMG1S B-4 Plain Sliced Veneer 4 x 8

12HMB2PS B-2 Plain Sliced Veneer 4 x 8

34HMA1PS A-1 Plain Sliced Veneer 4 x 8

34HMA1PSFC A-1 Plain Sliced MDF 4 x 8

34HMA1PSFCSMN A-1 Plain Sliced, SequenceMatched & Numbered

MDF 4 x 8

34HMSH Shop Rotary Veneer 4 x 8

Sapele Mahogany

34SAPA1QTR A-1 Quarter Sawn Veneer 4 x 8

Khaya Mahogany

14KHG1S B-4 Plain Sliced Veneer 4 x 8

12KHB2PS B-2 Plain Sliced Veneer 4 x 8

34KHA1PS A-1 Plain Sliced Veneer 4 x 8

34KHA1PSFC A-1 Plain Sliced MDF 4 x 8


14MA1W1PBC A-1 Select White Rotary, Whole Piece Face ParticleBoard 4 x 8

14MB1W1FC B-1 Uniform White Rotary, Whole Piece Face MDF 4 x 8

14MUWB2BEAD B-2 Uniform White Rotary, Beaded 1 O.C. Veneer 4 x 8

14MB2N1 B-2 Rotary, Whole Piece Face Veneer 4 x 8

14MUWG2SFC B-2 Uniform White Rotary MDF 4 x 8

14MB2W1FCBEAD B-2 Uniform White Rotary, Whole Piece Face, Beaded MDF 4 x 8

14MB2WPSFC B-2 Uniform White Plain Sliced MDF 4 x 8

14MUWG2S

B-2 Uniform White Rotary Veneer 4 x 814MUWG1SBEAD B-4 Uniform White Rotary, Beaded 1 O.C. Veneer 4 x 8

14BEADMAP B-4 Uniform White Rotary, Beaded MDF 4 x 8

14MB4W1 B-4 Uniform White Rotary, Whole Piece Face Veneer 4 x 8

14MB4WPS B-4 Uniform White Plain Sliced Veneer 4 x 8

14MNG1S B-4 Rotary Veneer 4 x 8

14MUWG1S B-4 Uniform White Rotary Veneer 4 x 8

12MB2N B-2 Spliced Face Veneer 4 x 8


12MB2W B-2 Uniform White Rotary Veneer 4 x 8


13/28



12MB2WFC B-2 Uniform White Rotary Spliced MDF 4 x 8

1210MB2WFC B-2 Uniform White Rotary MDF 4 x 10

12MD31 D-3 Rotary, Whole Piece Face Veneer 4 x 8

34MA1N1 A-1 Rotary, Whole Piece Face Veneer 4 x 8

34MA1NFC A-1 Spliced Face MDF 4 x 8

34MA1PSW A-1 Select White Plain Sliced Veneer 4 x 8

3410MA1WFC A-1 Select White Plain Sliced MDF 4 x 10

3410MA1WPS A-1 Select White Plain Sliced Veneer 4 x 10

34MA1N1PB A-1 Rotary, Whole Piece Face ParticleBoard

4 x 8

34MA1PSWFC A-1 Select White Plain Sliced MDF 4 x 8

34MA1WPSFCSMN A-1 Select White Plain Sliced, Sequence Matched &Numbered

MDF 4 x 8

34MA1WPSPB A-1 Select White Plain Sliced ParticleBoard

4 x 8

34MUWA4PSPB A-4 Select White Plain Sliced ParticleBoard

4 x 8

34MB1WPS B-1 Uniform White Plain Sliced Veneer 4 x 8

3410MB2WFC B-2 Uniform White Spliced Face MDF 4 x 10

34MB2WFC B-2 Uniform White Spliced Face MDF 4 x 8

34410MB2WPSPB B-2 Uniform White Plain Sliced ParticleBoard

4 x 10

3458MB2WFC B-2 Uniform White Plain Sliced MDF 5 x 8

34MB2N B-2 Spliced Face Veneer 4 x 8


34MB2N1FC B-2 Rotary, Whole Piece Face MDF 4 x 8

34MB2W B-2 Uniform White Spliced Face Veneer 4 x 8



34MD31 D-3 Rotary, Whole Piece Face Veneer 4 x 8

34MSH Shop Rotary Veneer 4 x 8

1MA1N1 1 A-1 Uniform White Rotary, Whole Piece Face MDF 4 x 8

118MB2W1FC 1 B-2 Uniform White Rotary, Whole Piece face MDF 4 x 8




14/28


Red Oak Plywood

With its open and abundant heartwood, red oak varies from reddish tan to brown. Its consistent coloration from panel to panel makes a good choice for awide variety of furniture, cabinets and fixtures.


14ROA11 A-1 Rotary, Whole Piece Face Veneer 4 x 814ROA11PBC A-1 Rotary, Whole Piece Face Particle Board 4 x 8

3410ROA1PSFC A-1 Plain Sliced MDF 4 x 10

3410ROA2PS A-2 Plain Sliced Veneer 4 x 10

34ROA1 A-1 Rotary Spliced Veneer 4 x 8

34ROA11 A-1 Rotary, Whole Piece Face Veneer 4 x 8

34ROA1PS A-1 Plain sliced MDF 4 x 8

34ROA1PSFCSMN A-1 Plain Sliced, Sequence Matched & Numbered MDF 4 x 8

34ROAAPSPSFC A-A Plain Sliced MDF 4 x 8

34ROA1PSFC A-1 Plain Sliced MDF 4 x 8

1ROA1 1 A-1 Rotary Spliced Veneer 4 x 8

1ROAAPSPS 1 A-A Plain Sliced Veneer 4 x 8

14BEADRO B-4 Rotary, Beaded MDF 4 x 8

14ROB1PSFC B-1 Plain Sliced MDF 4 x 8

14ROPS B-4 Plain Sliced Veneer 4 x 8

14ROB21 B-2 Rotary, Whole Piece Face Veneer 4 x 8

14ROB21FCBEAD B-2 Rotary, Whole Piece Face, Beaded MDF 4 x 8

14ROB2BEAD B-2 Rotary, Beaded Veneer 4 x 8

14ROG1S B-4 Spliced Face Veneer 4 x 8

14ROG2S B-2 Spliced Face Veneer 4 x 8

14ROG1SBEAD B-4 Rotary, Beaded Veneer 4 x 8

14ROG2SFC B-2 Spliced Face MDF 4 x 8

1210ROB2FC B-2 Spliced Face MDF 4 x 10

12ROB2 B-2 Spliced Face Veneer 4 x 812ROB21 B-2 Rotary, Whole Piece Face Veneer 4 x 8

12ROB2FC B-2 Spliced Face MDF 4 x 8


58ROB21FC B-2 Rotary, Whole Piece Face MDF 4 x 8

34ROBBWPF2STS B-B Rotary, Whole Piece Face Veneer 4 x 8

3458ROB2FC B-2 Rotary Spliced MDF 5 x 8


34ROB21FC B-2 Rotary, Whole Piece Face MDF 4 x 8

34ROB2PSPB B-2 Plain Sliced Particle Board 4 x 8

34ROB2PSPBC B-2 Plain Sliced Particle Board 4 x 8

12ROSH Shop Rotary Veneer 4 x 8

34ROSH Shop Rotary Veneer 4 x 8

34ROD31 D-3 Rotary, Whole Piece Face Veneer 4 x 8

1ROSH 1 Shop Rotary Veneer 4 x 8



15/28


White Oak Plywood

White Oak has an open grain. Its hardness and strength making it a perennial favorite for furniture and fixtures. Varies considerably in color from lightgrayish tan to brown.


Knotty Pine Plywood

Knotty Pine plywood captures the appearance of pine timber whose rustic charm adds beauty. Veneers have yellowish brown color streaks and/or spots.It also has small conspicuous burls and pin knots.


Walnut Plywood

Walnut, a much sought after hardwood, has many interesting variations in its grain pattern that add to its distinctive nature. These become even morepronounced depending on how it is cut. Its heartwood varies from gray-brown to dark purplish-brown. It is mainly used in upscale homes and furniture.


14WOG1S B-4 Plain Sliced Veneer 4 x 8

34WOA1PS A-1 Plain Sliced Veneer 4 x 8


14KPB2PSFC B-2 Plain Sliced MDF 4 x 8

14KPG1S B-4 Plain Sliced Veneer 4 x 8

14KPG2S B-2 Plain Sliced Veneer 4 x 8

12KPB2KBFC B-2 Rotary, Tropical Back MDF 4 x 8

12KPB2PS B-2 Plain Sliced Veneer 4 x 8

34KPA1PS A-1 Plain Sliced Veneer 4 x 8

34KPB2KB B-2 Plain Sliced, Tropical Back Veneer 4 x 8

34KPB2KBFC B-2 Rotary, Tropical Back MDF 4 x 8

34KPB2PS B-2 Plain Sliced Veneer 4 x 8

34KPSH Shop Plain Sliced Veneer 4 x 8


14WPSG1S B-4 Plain Sliced Veneer 4 x 8

3484WA1PS A-1 Plain Sliced Veneer 8 x 4 cross-grain

34WA1PS A-1 Plain Sliced Veneer 4 x 8

34WA1PSFC A-1 Plain Sliced MDF 4 x 8

34WA1PSFCSMN A-1 Plain Sliced, Sequence Matched MDF 4 x 8



16/28


Prefinished PlywoodUV Prefinished

We have the prefinished hardwood plywood for any job. Well finish one or both sides to your specifications and before you even start, your work is par tiallydone.

By using UV finished plywood you can eliminate exposure to harmful VOC emissions. Choose from any combination of species, grade and core availablefor special order. Or select from our stock list below for prompt delivery.

Our UV plywood is perfect for use in cabinets, vanities, casegoods, end panels, shelving, drawer parts and any place a clean, durable clear finish isrequired.

Lowers sanding and finishing cost Improves productivity Quality - upgrade to a real wood interior Environmentally responsible

Ref# Thickness Grade Cut Core Size Prefinished

Birch

14BG1SUV1 B-4 Rotary Veneer 4 x 8 1 Side

12BB2N1UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side

12BB2N1UV2 B-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides

12BSHUV2 Shop Rotary Veneer 4 x 8 2 Sides

58BSHUV2 Shop Rotary veneer 4 x 8 2 Sides

34BB2N1UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side

34BB2N1UV2 B-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides

34BC3NUV1 C-3 Rotary Veneer 4 x 8 1 Side34BD31UV1 D-3 Rotary, Whole Piece Face Veneer 4 x 8 1 Side, Back

34BD31UV2 D-3 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides

34BSHUV1 Shop Rotary Veneer 4 x 8 1 Side

34BSHUV2 Shop Rotary Veneer 4 x 8 2 Sides

1BB2N1UV2 1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides

Cherry

14CHA4PSUV1 A-4 Plain Sliced Veneer 4 x 8 1 Side

34CHA1PSUV2 A-1 Plain Sliced Veneer 4 x 8 2 Sides

34CHB2PBCUV1B B-2 Plain Sliced Particle Board 4 x 8 1 Side, Back

Maple

14MB4N1UV1 B-4 Rotary, Whole Piece Face Veneer 4 x 8 1 Side

14MB4NUV1 B-4 Rotary Veneer 4 x 8 1 Side

14MC4NUV1 C-4 Rotary Veneer 4 x 8 1 Side

12MB2NUV2 B-2 Rotary Veneer 4 x 8 2 Sides

12MB2N1UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side12MC2NUV1 C-2 Rotary Veneer 4 x 8 1 Side, Face

12MD2NUV2 D-2 Rotary Veneer 4 x 8 2 Sides


58MC2NUV2 C-2 Rotary Veneer 4 x 8 2 Sides


34MB2N1PBCUV1B B-2 Rotary, Whole Piece Face Particle Board 4 x 8 1 Side, Back

34MB2N1UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side

34MB2N1UV2 B-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides

34MB2NPBCUV2 B-2 Rotary Particle Board 4 x 8 2 Sides



17/28

Import Plywood

Imported from China, domestic veneer species are presented on veneer core panels. Available in a variety of thicknesses, grades, and cuts, all panels are4x8.

34MB2NUV1 B-2 Rotary Veneer 4 x 8 1 Side

34MB2NUV2 B-2 Rotary Veneer 4 x 8 2 Sides


34MC2NUV2 C-2 Rotary Veneer 4 x 8 2 Sides

34MD2N1UV1 D-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side

34MD2N1UV2 D-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides34MD3N1UV1 D-3 Rotary, Whole Piece Face Veneer 4 x 8 1 Side

34MB2W1UV2 B-2 Uniform White Rotary, Whole Piece Face Veneer 4 x 8 2 Sides

Poplar

14POPUV1 BB-CC Rotary Veneer 4 x 8 1 Side

12POPUV2 BB-CC Rotary Veneer 4 x 8 2 Sides

34POPUV2 BB-CC Rotary Veneer 4 x 8 2 Sides

Red Oak14ROG1SUV1 B-4 Rotary Veneer 4 x 8 1 Side

12ROB21UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side

12ROB2UV2 B-2 Rotary Veneer 4 x 8 2 Side

34ROB21FCUV2 B-2 Rotary, Whole Piece Face MDF 4 x 8 2 Sides

34ROB21UV1 B-2 Rotary, Whole Piece Face Veneer 4 x 8 1 Side

34ROB21UV2 B-2 Rotary, Whole Piece Face Veneer 4 x 8 2 Sides

34ROB2PBUV1 B-2 Rotary Particle Board 4 x 8 1 Side, Back

34ROSHUV1 Shop Rotary Veneer 4 x 8 1 Side

34ROSHUV2 Shop Rotary Veneer 4 x 8 2 Sides

Ref# Species Thickness Grade Description

14BIRIMP Birch 5.2mm good 1 side Plain Sliced

12BIRIMP Birch 12mm C-2 Rotary Cut

12BIRIMPC3UV2 Birch 12mm C-3 Prefinished 2Sides

12WBIRIMP White Birch 12mm C-D Rotary Cut WPF

34BIRIMP Birch 18mm C-2 Rotary Cut

34BIRSP Birch 18mm C-3 Rotary Cut

34BIRIMPC2W White Birch 18mm C-2 Rotary Cut

34BIRIMPC3UV2 Birch 18mm C-3 Prefinished 2

Sides

34WBIRIMP White Birch 18mm C-D Rotary Cut WPF

14CHIMP Cherry 5.2mm good 1 side Plain Sliced

34CHA2IMP Cherry 18mm A-2 Plain Sliced

14MAPIMP Maple 5.2mm good 1 side Plain Sliced

14POP Poplar 5.2mm DBB-CC Rotary Cut

12POP Poplar 12mm DBB-CC Rotary Cut WPF

34POP Poplar 18mm DBB-CC Rotary Cut WPF

14OAKIMP Red Oak 5.2mm good 1 side Plain Sliced

34ROABIMP Red Oak 18mm A-B Plain Sliced


Baltic Birch Plywood


18/28

y

Baltic Birch is a multi-ply panel product made in Russia. It is available in a vast array of thicknesses and grades. Typically white in color, the multi-ply cross-bands have excellent screw-holding properties and provide a decorative edge when left uncovered.

Available in thicknesses ranging from 3mm to 25mm and panel sizes of 5x5 or 4x8, its most commonly used in furniture, casegoods, and cabinetry.

Baltic Birch is imported on GOST standards. We offer the following grades from stock:

Grade B-Select one-piece face veneer is generally light and even in color. Some small, closed, pin knots may be allowed, as well as some brownstreaks. NO patches or voids are allowed. The surface is well sanded.

Grade BB-One-piece face veneer is generally light and uniform in color. Occasional pin knots and mineral streaking is allowed. ALL open knots anddefects other than those allowed in grade B have been cut out and replaced with oval patches. The patch veneer is the same grade and specie, and istypically of the same color. The surface is sanded.

Grade C-This grade allows patches, open knots, and veneer splits. Grade C is not normally sanded.

Virola/Faviera Plywood

Faviera is a utility plywood produced in Latin America. It can be used as a substitute for Lauan/Meranti in most cases.

Faviera is an open grain wood that ranges in color from white to dark brown. Some mills are willing to sort for white wood. Its most commonly used forlamination and component build up.

Ref# Thickness Grade Core Size

185BB 3mm BB-BB Veneer Core 60 x 60

185BBB 3mm B-BB Veneer Core 60 x 60

4M5BB 4mm BB-BB Veneer Core 60 x 60


145BBB 5.2mm B-BB Veneer Core 60 x 60







125CC 12mm C-C Veneer Core 60 x 60585BB 15mm BB-BB Veneer Core 60 x 60


585CC 15mm C-C Veneer Core 60 x 60

15955BB 15.9mm BB-BB Veneer Core 60 x 60





14VIR 5.2mm OVL-BTR Veneer Core 48x96

12VIR 12mm BB-CC Veneer Core 48x96



34VIR4 18mm BB-CC Veneer Core 48x96

34XVIR 18mm PBB-CC Exterior Veneer Core 48x96

34VIRIND 18mm Industrial Veneer Core 48x96

Ivory Virola

14IVORY 5.2mm BB-CC Veneer Core 48x96

12IVORY 12mm BB-CC Veneer Core 48x96

34IVORY 18mm BB-CC Veneer Core 48x96

Feather White Virola

34FW 18mm BB-CC Veneer Core 48x96

Lauan/Meranti Plywood


19/28

y

Lauan/Meranti is a well-known species imported from both Malaysia and Indonesia. Suitable for and abundance of uses its related to Mahogany. Theopen grain can range in color from red to pink to white.

Common uses include lamination, underlayment, furniture parts, and casegoods.

Sande Plywood

Sande is golden white species from Latin America. Primarily used for case goods and paint applications. Sande is imported under IWPA standards.

Fir Plywood

Fir is valued for its strength, light weight and resistance to decay. The AC-Fir has a A grade face and a C grade back. Our marine grade panels arecommonly used in boats or other applications where the wood will be exposed to moisture.


Lauan/Meranti Plywood

18LAU 2.7mm OVL-BTR Veneer Core 48x96

14LAU 5.2mm OVL-BTR Veneer Core 48x96

14XLAU 5.2mm OVL-BTR Veneer Core 48x96

38LAU 9mm BB-CC Veneer Core 48x96




34LAULC 18mm BB-CC Lumber Core 48x96

Platforms

1116PLATFORM 17.46mm BB-CC Veneer Core 48x96

716PLATFORM 11.11mm BB-CC Veneer Core 48x96

Bending Lauan

14BGLAU 5.2mm 96 Veneer Core 96x48 cross-grain

38BGLAU 9.52mm BB-CC Veneer Core 96x48 cross-grain

38BGLAU48 9.52mm BB-CC Veneer Core 48x96


14SANDE 5.2mm OVL-BTR Veneer Core 48 X 96

12SANDE 12mm BB-CC Veneer Core 48 X 96

34SANDE 18mm BB-CC Veneer Core 48 X 96

Ref# Thickness Width Length

12MARGF 48 96

34MARGF 48 96

34ACF 48 96

1ACF 1 48 96

UNIBOARD


20/28

Panval Melamine

Whether your designing or manufacturing office furniture, store fixtures, kitchen cabinets or home furnishings, Panval thermofusedmelamine laminates set the industry standard for quality and performance. The Panval Collection offers you a choice of solids,woodgrains, abstracts and metallics to enhance the corporate, retail or home environment. For architects, manufacturers anddesigners alike, the Panval Collection opens up a whole new world of exciting possibilities.

Ref# Thickness (in.) Size Finish

1458251953P 5 x 8 Albany Oak/Captiva Maple

1448888920P 4 x 8 Almond

1248136P 4 x 8 Almond

1258136P 5 x 8 Almond

5848920P 4 x 8 Almond

5858136P 5 x 8 Almond

5859136P

5 x 9 Almond3448136P 4 x 8 Almond

3458136P 5 x 8 Almond

3459136P 5 x 9 Almond

3458810P 5 x 8 Antique White

3459810P 5 x 9 Antique White

1448810992P 4 x 8 Antique White/Hardrock Maple

3458175P 5 x 8 Bavarian Beech

1448175802P 4 x 8 Bavarian Beech/Willow Grey

3458809P 5 x 8 Blizzard

3448003P 4 x 8 Cabinet White

5848168P 4 x 8 Canadian Grey




11859168P 1 5 x 10 Canadian Grey

3458953P 5 x 8 Captiva Maple

3458176P 5 x 8 Caramel Cherry

3458123P 5 x 8 Charcoal

1448123176P 4 x 8 Charcoal/Caramel Cherry

1458123176P 5 x 8 Charcoal/Caramel Cherry

34PVCHPS992PBC 4 x 8 Cherry/Hardrock Maple

3449CHPS992P 4 x 9 Cherry/Hardrock Maple

34PVCHPS555PBC

4 x 8 Cherry/Nova White3458383FFP 5 x 8 English Brown Oak

1458383388FFP 5 x 8 English Brown Oak/Finnish Oak

1448383971P 4 x 8 English Brown Oak/Pear

3458388FFP 5 x 8 Finnish Oak

3458987P 5 x 8 Grey Glace

3458826P 5 x 8 Haze

3448421PPC 4 x 8 Honduras Mahogany

1248992P 4 x 8 Hardrock Maple




21/28






3458992PGBP 5 x 8 Hardrock Maple/Backer1458992555P 5 x 8 Hardrock Maple/Nova White

1448992555P 4 x 8 Hardrock Maple/White

1448M609968P 4 x 8 Imperial Maple

3458968P 5 x 8 Imperial Maple

3458704P 5 x 8 June Mahogany

3458832P 5 x 8 Limoges Pear

1258562P 5 x 8 Manitoba Maple

3458562P 5 x 8 Manitoba Maple

1448562978P 4 x 8 Manitoba Maple/Regal Cherry

3449MAPPS992P 4 x 9 Maple Veneer/Hardrock Maple

3449332555P 4 x 9 Maple/Nova White

3458806P 5 x 8 Marine

34PVBIRNRC555PBC 4 x 8 Natural Birch/Nova White

34PVMAPNRC555PBC 4 x 8 Natural Maple/Nova White

5848946P 4 x 8 Natural Oak

3458946P 5 x 8 Natural Oak

3458920P 5 x 8 New England Almond

1448888P 4 x 8 Nova Black




3448MDFPE888 4 x 8 Nova Black-MDF

3448888P 4 x 8 Nova Black3458888P 5 x 8 Nova Black


11859888P 1 5 x 10 Nova Black

1248888PGBP 4 x 8 Nova Black/Greenbay Twill

1448555P 4 x 8 Nova White

3458MDFPE555G1S 5 x 8 Nova White










341289491EBM 12 x 8 Nova White

148555P 1 4 x 8 Nova White



22/28

158555P 1 5 x 8 Nova White

1448555136P 4 x 8 Nova White/Almond

1448555920P 4 x 8 Nova White/Almond

5848555T604P 4 x 8 Nova White/Antique White

5848555PGBP 4 x 8 Nova White/Greenbay Twill

3448555PGBP 4 x 8 Nova White/Greenbay Twill3458555PGBP 5 x 8 Nova White/Greenbay Twill

1248555PGBP 4 x 8 Nova White/Greenbay Twill


3458971P 5 x 8 Pear

3448765FFP 4 x 8 Port Maple

1448765978FFP 4 x 8 Port Maple/Regal Cherry

1448M610959P 4 x 8 Provencal Maple

3458959P 5 x 8 Provencal Maple

34PVROPS992PBC 4 x 8 Red Oak/Hardrock Maple

34PVROPS555PBC 4 x 8 Red Oak/Nova White

3449330555P 4 x 9 Red Oak/Nova White

3448978FFP 4 x 8 Regal Cherry

3458978P 5 x 8 Regal Cherry

3458978959P 5 x 8 Regal Cherry/Provencal Maple

1448978555P 4 x 8 Regal Cherry/White

3458972FFP 5 x 8 Royal Maple

1458972992FFP 5 x 8 Royal Maple/Hardrock Maple

3459113P 5 x 9 Super White

3458385P 5 x 8 Sapelli Mahogany

1448385826P 4 x 8 Sapelli Mahogany/Haze

1458385826P 5 x 8 Sapelli Mahogany/Haze

3458385808P 5 x 8 Sapelli Mahogany/Provence

5848805P 4 x 8 Sunset Grey3448805P 4 x 8 Sunset Grey

3458805P 5 x 8 Sunset Grey

1448805168P 4 x 8 Sunset Grey/Canadian Grey

1448933TW31P 4 x 8 Sycamore/Texas Walnut

1448C601946P 4 x 8 Virginia Pine/Natural Oak

3448WH39P 4 x 8 White

34PVMAPPS555PBC 4 x 8 White Maple/Nova White

34PVMAPPS992PBC 4 x 8 White Maple/Hardrock Maple

3458802P 5 x 8 Willow Grey

Nevamar Melamine


23/28

MelaFace thermal fused melamine panels from Nevamar are value-engineered to provide durability and cost-efficiency,as well as distinctive design appeal.

The panels are highly resistant to moisture, stain, soiling, scuffing, and scratching. In manufacturing, panels are thermalfused under heat and pressure to permanently bond the super-saturated paper to the substrate. This eliminatesdelamination and provides a highly realistic, natural appearance.

Nevamar melamine panels provide a wide range of cost-efficient designs for furniture, fixture, and cabinet makers.

Ref# Thickness Size Color Substrate

14483341949M 4 x 8 Natural Oak - White Particle Board

14483346M 4 x 8 Natural Oak Particle Board

14484308948M 4 x 8 Hardrock Maple - White Particle Board

1448920M 4 x 8 Almond Particle Board

1448927961M 4 x 8 Folkstone - Fog Particle Board

1448949920M 4 x 8 White - Almond Particle Board

1248909MDF2S 4 x 8 Black MDF1248920M 4 x 8 Almond Particle Board

1248951M 4 x 8 Ultra White Particle Board

5848949M 4 x 8 White Particle Board


34489090M 4 x 8 Black Particle Board

3448909MDF2S 4 x 8 Black MDF



3448949PGBM 4 x 8 White - Glueable backer Particle Board


3448MDFLW1S 4 x 8 White - Raw Light MDF

3448MDFP949G1S 4 x 8 White - Raw MDF Plus

148951M 1 4 x 8 Premium White Particle Board

148MDF949G1S 1 4 x 8 White - Raw MDF



1258927M 5 x 8 Folkstone Particle Board



1258961M 5 x 8 Fog Particle Board

58581168M 5 x 8 Galaxy White Particle Board


5858920M

5 x 8 Almond Particle Board5858927M 5 x 8 Folkstone Particle Board



5858951MG1S 5 x 8 White - Raw Particle Board


34581097M 5 x 8 Antique White Particle Board

34583213M 5 x 8 Gunstock Walnut Particle Board

34581083M 5 x 8 California Almond Particle Board


34583346M 5 8 N t l O k P ti l B d

Ref# Thickness Size Color Substrate


24/28

Vinyl/Foil Panels


34584308M 5 x 8 Hard Rock Maple Particle Board



3458927M 5 x 8 Folkstone Particle Board

3458949M 5 x 8 White Particle Board3458949MR35M 5 x 8 White-Navy Particle Board

3458949PGBM 5 x 8 White - Glueable backer Particle Board

3458951C 5 x 8 Ultra White Particle Board



3458MDFP949G1S 5 x 8 White - Raw MDF Plus

158951M 1 5 x 8 Ultra White Particle Board

158949M 1 5 x 8 White Particle Board

3459951C 5 x 9 Ultra White Particle Board


118591097M 1 5 x 9 Antique White Particle Board


Ref# Thickness Front Back Core

48 X 96

14AV1SL Almond Raw Lauan

14BV1SMDF Black Raw MDF

14BV2SMDF Black Black MDF

14WV1SHBT White With Low Gloss Raw Fibrex

14WV1SL White With Low Gloss Raw Lauan

14WV1SMDF

White Raw MDF1848FIBREX Fibrex Raw Fibrex Raw Fibrex

1848WP1S White White Fibrex

1448WOF1S Western Oak Western Oak Fibrex

1448WP1S Pure White Pure White Fibrex

1448FOGF1S Fog Fog MDF

1448FIBREX Fibrex Raw Fibrex Raw Fibrex

1448300920F White St. Almond Fibrex

1448602F Hard Rock Maple Raw Fibrex

1448AF1S Almond Almond MDF

1448FOLF1S Folkstone Folkstone MDF

1448H1400F Cabinet Print Fibrex Raw Fibrex

1448BF1S Black Black MDF

1448WF1S White White Fibrex

1248311700G1SMDF Fairfield Maple Raw MDF

12WMOP1 White Raw Plywood

12WMOP2 White White Plywood

34WV1SL White Raw Veneer

34WMOP1IMP White Raw Import

Ref# Thickness Front Back Core


25/28

Particle Board

Particleboard is used as a core material in office furniture, shelving, and kitchen cabinets. The surface is excellent for application of any laminates,veneers or painting. Choose from a large range of thickness and panel sizes.

34WMOP1IMP White Raw Import

34WMOP2 White White Import Plywood Plat-form

5848451MDF Walnut Walnut MDF

60 X 96

1458WV1SMDF White Raw MDF


1458602F Hard Rock Maple Raw Fibrex

1458BF1S Black Black Fibrex


1458MAPF1S Fashion Maple Fashion Maple Fibrex

1458WP1S Pure White Pure White Fibrex

1458WF1S White White Fibrex

60 X 108

1459WF1S White White MDF


3848PB 49 97

1248PB 49 97

1258PB 61 97

583010PB 30 121

5848PB 49 97

5858PB 61 97

111648PB 49 97

111658PB 61 97

3448PB 49 97

34410PB 49 1213458PB* 61 109

3459PB* 61 97

34510PB* 61 121

34512PB 61 145

7848PB 49 97

151658PB 61 97

148PB 1 49 97

158PB 1 61 97

1512PB 1 61 145

118512PB 1 61 145

11848PB 1 49 97

11858PB 1 61 97

1316310PB 1 37 121

Cut To Size Particleboard

Our cut sizes of particleboard are designed to help reduce waste The smooth surface makes it highly suitable for all types of laminating Choose from a


26/28

Our cut sizes of particleboard are designed to help reduce waste. The smooth surface makes it highly suitable for all types of laminating. Choose from awide variety of thicknesses and panel sizes.

Medium Density FiberboardMDF

Medium density fiberboard (MDF) is an engineered wood product composed of wood fibers and a synthetic resin joined together under heat and pressureto form large panels. This product features a uniform density for smooth machining and low tool wear.The wide range of sealers, primers, and coatings canbe used on MDF to produce a hard durable surface.


34258PB 25 97

342510PB 25 121

342512PB

25 14534308PB 30 97

343010PB 30 121

343012PB 30 145

34368PB 36 97

343610PB 36 121

343612PB 36 145

15161128PB 1.5 97

118258PB 1 25 97

1182510PB 1 25 121

1182512PB 1 25 145

118308PB 1 30 97

1183012PB 1 30 145

Particle Board with Craft Paper Back

1182512PBCP 1 25 145

1183012PBCP 1 30 145

Particle Board Backsplash

58378PBBS 3.875 97


Weyerhaeuser Premier Plus

3848MDFP 49 97

3858MDFP 61 97

38510MDFP 61 121

1248MDFP ' 49 97

12510MDFP 61 121

1258MDFP 61 975848MDFP 49 97

5858MDFP 61 97

58510MDFP 61 121

71658MDFP 61 97

341216MDFP 11.25 193

3448MDFP 49 97

34510MDFP 61 121

34512MDFP 61 145

3458MDFP 61 97

3459MDFP 61 109



27/28

148MDFP 1 49 97

158MDFP 1 61 97

11848MDFP 1 49 97

11858MDFP 1 61 97

11458MDFP 1

61 9711258MDFP 1 61 97

Premier Lite

3458MDFL 61 97

158MDFL 1 61 97

Premier Ultra Lite

3448MDFL 49 97

34512MDFL 61 145

Thin MDF

1448MDF 49 97

West Fraser Ranger MDF

1248MDFR 49 97

3448MDFR 49 97

Beaded

14MDFBEAD 49 97

14MDFBEADP 49 97

Uniboard Panfiber

1248MDFUL 49 97

3448MDFUL 49

3458MDFUL 61 97

148MDFUL 1 49 97

1448MDFPE 49 97

1458MDFPE 61 97

3848MDFPE 49 97

5848MDFPE 49 97

5858MDFPE 61 97

58510MDFPE 61 121

1248MDFPE 49 97

12410MDFPE 49 121

1258MDFPE 61 97

3448MDFPE 49 97

34410MDFPE 49 121

3458MDFPE 61 97

3459MDFPE 61 109

3410MDFPE 61 121

34512MDFPE 61 145

148MDFPE 1 49 97

158MDFPE 1 61 97

Hardboards

Hardboard is chemically treated to make it very durable and ridged. Used for drawer bottoms and backs of cabinets it can also be made into a pegboard


28/28

when it is perforated with holes.

INTERIOR PRODUCTS

Timberflex

Timberflex is ideal for custom fabrication because it is the first and only high-quality 3/4 bendable panel that has three-plyItalian popular face ready to paint, stain or laminate without the need for patching or sanding. The panels can bend to a 5radius and are perfectly flat without dips, valleys and hard spots often found in bendable plywood.

INTERIOR PRODUCTS

Kerfkore

Choose Kerfkore for doing fast and accurate radius work. Kerfkore is a revolutionary substrate material that allows horizontal orvertical grade laminates, metals, 2-Ply and phenolic backed veneers to be laminated flat and then formed into virtually anyshape without stress cracks, delamination or telegraphing. Kerfkore provides for smooth and symmetrical inside and outside

radii up to 3-1/2 The face paper is a black lates impregnated paper.

INTERIOR PRODUCTS

EconoKore

Its a unique 2-Ply product that brings you the ability to form curves with less labor...and less cost.

Made of processed MDF core with High Density or Poplar overlay, youllfind it much easier and more economical to use than bending ply!

INTERIOR PRODUCTS

Flexboard

Flexboard is a low-cost alternative to bending plywood for radius application. Flexboard provides 10-inch radius fabrication

quickly and easily with no sanding, patching, multiple layers, special installation, or odor. The hardboard surface is ideal forpainting or laminating paper, vinyl, calibrated for uniform thickness throughout the manufacturing process.

Ref# Thickness Size Description

18TEMPHB 48x96 tempered hardboard

14PEGBD

48x96 pegboard14TEMPHB 48x96 tempered hardboard

Ref# Size12TIMBERFLEX in. 8 x 4

34TIMBERFLEX84 in. 8 x 4

Ref# Size

34KERFKORE1S in. Single Side 4 x 8

Ref# Size

38ECONO84 in. 8 x 4 MDF

38ECONOPOP84 in. 8 x 4 Poplar

Ref# Size

34FLEXBOARD84 in. 8 x 4

Documents

Wood Section