This page is intentionally left blank.

G.5.1V16.2

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C

Lattice Doors

Lattice Doorwith CPL100

• ½" x ½" [12.7mm x 12.7mm]Over Lapped Lattice Openings.

• Slat Width = 7/16" (0.4606")[11.1mm].

Lattice Doorwith CPL200

• 1" x 1" [25.4mm x 25.4mm]Half Lapped Lattice Openings.

• Slat Width = ⅜" (0.375")[9.5mm].

Lattice Center Panels & Lattice Sheet StockDesign Options

G

Lattice Spacer Molding #1630PC: AM102 Multiplier: .70

SR107 SR107

Lattice Sheet Stock

CPL100• ½" x ½" [12.7mm x 12.7mm]

Over Lapped Lattice Openings.

• Slat Width = 7/16" (0.4606")[11.1mm].

• Sheet Size = 23⅝" x 47¼".[600.1mm x 1200.2mm]

CPL200• 1" x 1" [25.4mm x 25.4mm]

Half Lapped Lattice Openings.

• Slat Width = ⅜" (0.375")[9.5mm].

• Sheet Size: 24" x 36"[609.6mm x 914.4mm].

Ordering & Pricing Notes: Lattice Center Panels & Lattice Sheet StockOrdering Guidelines

1 Order FormsFor doors and/or drawer fronts with lattice center panels, please use Door and/or Drawer Front Order Forms (E•Z Forms #2 and #3).For lattice sheet stock, please use the Molding & Miscellaneous Order Form (E•Z Form #5).Pricing

1 Pricing Please see Section G.5 of the Wholesale Pricing Catalog.Notes Continued on Next Page...

► For PRICING ► See Section G.5 in our Wholesale Pricing Catalog.

G.5.2V16.2.com

®® 99.7% American MadeC

Design Options

G

Lattice Center Panels & Lattice Sheet Stock

Technical Notes: Lattice Center Panels & Lattice Sheet StockDesign Options (Chapter G)

1 Lattice Pattern Only available with a diagonal lattice pattern, in the wood species and grades noted in Section G.5 of the Wholesale Pricing Catalog.

Finish Options (Chapter R)1 Finishing Finishing is an available option.2 Glazing Flow Pen Glaze is not an available option.

Molding Options (Chapter N)

1 Lattice Spacer MoldingWhen choosing a Lattice door with the CPL100 lattice center panel, Lattice Spacer Molding #1630 is used to help secure the lattice in the door frame. This molding is not needed when using the CPL200 lattice center panel.

Profile Options (Chapter E)1 Stile & Rail Profiles Doors with Lattice Center Panels can be produced using all stile and rail profiles, in almost any door style.

Wood Specie Options (Chapter S)1 Wood Species Natural White Oak lattice may be used with Select Red Oak stiles and rails.

► For PRICING ► See Section G.5 in our Wholesale Pricing Catalog.