Upload
others
View
7
Download
1
Embed Size (px)
Citation preview
WOOD FRAMING WALL+
SHOP DRAWINGS
Shop Drawings
Finish your modeling with built-in shop drawing
generator and deliver your wall framing
estimation the same hour. Build your complete
shop drawings with dimensioning, part lists and
material take-off automatically
Solution will collect all elements from one wall panel and make assembly with predefined views, add dimensions, add tags, make
sheets and put the views into the sheets
2
Shop Drawings
Shop drawing workflow consists of following steps:
1. Wall+ → define Shop Drawing Configuration
2. Wall+ → make shop drawings for one wall using Create Frame Assembly
3. Wall+ → sort frame members
4. Add shop drawing views into the sheet for one wall and save it as a template for the future walls
5. Wall+ → make shop drawings for other wall segments
6. Wall+ → update shop drawings if there are any changes in the model
3
Shop Drawing Configuration
3 tabs (Assembly Views, Schedules and Sheets) below go for assembly views setup, schedules setup and sheets setup
Shop Drawing
Configuration – the list of
saved shop drawing
configurations. Configurations
can be saved, duplicated,
renamed and deleted
4
Assembly Views
Assembly Views tab:
Create Assembly Views –
predefine assembly views,
view graphical presentment,
framing layers you want to
present
5
Assembly Views
Create new views by clicking button New
Click Duplicate to duplicate selected view. Full
row should be selected to activate this option
Click Delete to delete selected view
Select Move Up/Down to move view in
configuration dialog
6
Assembly Views
Create View –
select the views
you want to create
in the assembly
7
View – select the view type to create in the assembly. The list of view types comes from Revit. It can be: section, elevation, plan view,
legend, 3D view etc.
View Name – enter name for selected view
Framing Layer – select framing layer you want to filter in the view. It can be: main Frame, Vertical Nailer, Horizontal Siding,
Sheathing, Log etc. If None is selected then all layers will be visible in the view
View Template – select view template for every assembly view. View templates brings such information to the view, like scale,
graphical presentment etc. The list of view templates comes from your current Revit project. You can find and modify your project
view templates in Revit → View → Graphics → View Templates → Manage View Templates
Dimensioning Rules
Dimensioning Rule
– dimensioning rules
for the selected view.
Dimensioning rules
are saved under
separate name and
can be used for other
projects
8
Dimensioning rules can be created and modified under Edit Dimensioning Rules
Dimensioning Rules
Dimensioning rules can be saved, duplicated, renamed or deleted
Dimension Type – select dimension type which comes from your current project
Dimension Position – predefine how dimension should be added on the stud. Dimension can be added on the stud Left, Right, Location Point or Mixed position
9
Dimensioning Rules
Side – stud dimensions could be added at the
wall Top or Bottom
Relative Distance to Frame – distance index
from the frame to the first dimension chain.
It takes Dimension Line Snap Distance from
the dimension type and multiplies it by this
value, which is 1.5 by default
10
Tags
Elements in the views can be tagged. The list of tag families comes from your current project
Sample tags are loaded to your project using Load Families & Schedules
11
Structural Framing Tag – select a family for tagging all studs
and plates in the view
Sheathing Tag – select a family for tagging all sheathing panels
(Parts) in the view
Structural Connections Tag – select a family for tagging all
details, like anchors, clip angles etc. in the view
Tag Other – tags other elements, like electrical switches,
openings etc. in the view. Tag families comes from Annotate
tab → Tag All
Tags
12
Special Layer Filter
Layer Number – use
this option if there
are more than one
same layer used in
the wall type.
Before using this
option switch on Use
Layer Number
13
Layer number comes from the wall type
Single Layer – use this option if you need to show only selected wall layer without other layers. For example, the front side view with
a sheathing will be shown with main frame by default. If this option is switched on then only sheathing will be visible
Insert Grids
Insert Grids – adds Grid symbol into assembly views with shop drawings
14
Insert Grids
Original grids need to be created by the
location line of the wall in the plan view
15
Insert Grids
Grid symbol is a special family that we created. You will be able to predefine
its design, end segment length, head radius, etc.
16
Detail Views
Create Detail View – whereas with a simple
assembly view, you see only the assembly itself –
in isolation from other parts with which it interacts
– Detail Views lets you see how a given assembly
relates to other pieces of the pie, like walls, floors,
elevations, grids, etc.
17
Schedules
Wall+ will create schedules in the wall assembly by
predefined settings
Schedule Template – select a schedule from your
current project to be a template for the assembly part
list, material takeoff and other schedules
18
Select any regular schedule from a project to use it as
Schedule template in assembly Check schedules created in assembly views
Sample schedules will be loaded with Load
Families & Schedules. You can modify it or create
your own with your own columns, filters etc.
The software automatically create additional
parameters that can be used in schedules. For
example, Framing Member Mass – will show the
mass (weight) for every element
Note: elements needs to have material assigned
with a Density value
Materials can be assigned to the element
subcategory in Manage → Object Styles
Schedules
19
Sheets
Wall+ will create sheets in the wall assembly by
predefined settings
Titleblock – select the titleblock family to apply for
assemblies. Titleblock family list comes from your current
project
20
Sheets
Create first assembly → add views to the sheet manually → open
Shop Drawing Configuration → Sheets → select a sheet to be as a
template for other walls
W-100 1 Sheet
Newly created
assembly sheet
21
Create Frame Assembly
Create Frame Assembly – makes shop drawings for selected walls. Select any frame from the wall and
after pressing Create Frame Assembly the software will create shop drawings according to predefined
configuration
22
Update Frame Assembly
Update Frame Assembly – updates assembly of selected wall if any changes are made in Shop
Drawing Configuration
For example, dimension type was changed in configuration. Result after update process
23
Sort Structural Connections by Mark
Sort Structural Connections or
Framing – sorts framing
members for proper element
tagging. You can find parameter
with sorted values in Properties
→ Identity Data
The software uses Marks from
Framing Configuration
FM SortMark – parameter with
sorted values. It contains
Framing Member Mark values
and a number that is sorted by
framing length
24
Other features
Select Elements in Frame
Select Elements in Frame – selects all framing members of the same type in a framing. For example,
select a Stud → Select Elements in Frame → all Studs from a wall will be selected
26
Select Elements in all Frames
Select Elements in all Frames – selects all framing members of the same type in all the framings from the
project. For example, select a Stud → Select Elements in all Frames → all Studs from all walls will be
selected
27
Select Elements in all Frames by Level
Select Elements in all Frames by Level – selects all framing members of the same type in all the
framings from the same level. For example, select a Stud → Select Elements in all Frames by Level →
all Studs from all walls from the same level will be selected
28
Select all Frame Elements
Select all Frame Elements – selects all framing members from a wall. For example, select a Stud →
Select all Frame Elements → all elements, including frames, nailers, sidings from a wall will be selected
29
AGA CAD Ltd
T: +370 618 55671 | E: [email protected] | W: www.aga-cad.com
ENJOY WORKING WITH OUR PRODUCTS!