WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

EXTERIOR SHEATHING

INSTALL BUG SCREENAS NECESSARY

WOOD RAINSCREEN FURRING(3/8" THICK MIN)

1/4" GAP, DO NOT CAULK

APRON FLASHING (OPTIONAL)

MIN. 6" GRADE CLEARANCE

MAX. 2" OVERHANG

GRADE

NOTE:APRON FLASHING OR BOX FLASHINGDESIGNED TO MITIGATE WATER WITHA 15 SLOPE PROVIDES BETTERAESTHETICS.

FOUNDATION

INSULATIONWHERE REQ'D

INTERIOR SHEATHINGWOOD FRAMING

DETAIL:

GRADE CLEARANCE - RAINSCREEN

HARDIE® TEXTURED PANEL

HARDIE® Textured Panel on Wood Framing• Wood Framing with Wood Rainscreen Furring• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.01a

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

EXTERIOR SHEATHING

1/4" GAP

MIN. 6" GRADE CLEARANCE

GRADE

FOUNDATION

INSULATIONWHERE REQ'D

INTERIOR SHEATHINGWOOD FRAMING

DETAIL:

GRADE CLEARANCE - RAINSCREEN

HARDIE® TEXTURED PANEL

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.01b

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

INSTALL BUG SCREENAS NECESSARY

WOOD RAINSCREEN FURRING(3/8" THICK MIN)

• Wood Framing with Wood Rainscreen Furring

NOTE:APRON FLASHING OR BOX FLASHINGDESIGNED TO MITIGATE WATER WITHA 15 SLOPE PROVIDES BETTERAESTHETICS.

INSTALL BUG SCREENAS NECESSARY

WOOD RAINSCREEN FURRING(3/8" THICK MIN)

INTERIOR SHEATHING

WOOD FRAMING

INSULATIONWHERE REQ'D

BOTTOM PLATE

MOISTURE BARRIER

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

EXTERIOR SHEATHING

1/4" GAP, DO NOT CAULK

MIN. 1" - 2" CLEARANCEDEPENDING ON SPECIFICHARDIE ZONE

PATH / DRIVEWAY / SLABAPRON FLASHING(OPTIONAL)

NOTE:APRON FLASHING OR BOXFLASHING DESIGNED TOMITIGATE WATER WITH A 15SLOPE PROVIDES BETTERAESTHETICS.

CONCRETE SLAB /MASONRY FOOTING

DETAIL:

HARDSCAPE CLEARANCE

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.02a

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® TEXTURED PANEL

• Wood Framing with Wood Rainscreen Furring

INTERIOR SHEATHING

WOOD FRAMING

INSULATIONWHERE REQ'D

BOTTOM PLATE

MOISTURE BARRIER

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

EXTERIOR SHEATHING

1/4" GAP, DO NOT CAULK

MIN. 1" - 2" CLEARANCEDEPENDING ON SPECIFICHARDIE ZONE

PATH / DRIVEWAY / SLAB

NOTE:APRON FLASHING OR BOXFLASHING DESIGNED TOMITIGATE WATER WITH A 15SLOPE PROVIDES BETTERAESTHETICS.

CONCRETE SLAB /MASONRY FOOTING

DETAIL:

HARDSCAPE CLEARANCE

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.02b

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® TEXTURED PANEL

• Wood Framing with Wood Rainscreen Furring

INSTALL BUG SCREENAS NECESSARY

WOOD RAINSCREEN FURRING(3/8" THICK MIN)

EXTERIOR SHEATHING

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

RAINSCREEN AIR GAP

LOW PROFILE INSIDECORNER TRIM

HARDIE® TEXTURED PANEL

INSULATIONWHERE REQ’D

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

DETAIL:

INSIDE CORNER - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.03a

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

• Wood Framing with Wood Rainscreen Furring

EXTERIOR SHEATHING

HARDIE® TEXTURED PANEL

INSULATIONWHERE REQ’D

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

DETAIL:

INSIDE CORNER - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.03b

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

W INSIDE CORNER TRIM

RAINSCREEN AIR GAP

• Wood Framing with Wood Rainscreen Furring

EXTERIOR SHEATHING

HARDIETRIM® BOARDS

INSULATIONWHERE REQ’D

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

DETAIL:

INSIDE CORNER - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.03c

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® TEXTURED PANEL

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

RAINSCREEN AIR GAP

LEAVE APPROPRIATEGAP AND CAULK

HARDIETRIM® BOARDS

LEAVE APPROPRIATEGAP AND CAULK

EXTERIOR SHEATHING

INSULATIONWHERE REQ’D

WATER RESISTIVE BARRIER

RAINSCREEN AIR GAP

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

(HardieWrap™ or Equivalent)

DETAIL:

INSIDE CORNER - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.03d

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® TEXTURED PANEL

• Wood Framing with Wood Rainscreen Furring

EXTERIOR SHEATHING

WATER RESISTIVE BARRIER (HardieWrap™ or Equivalent)

DETAIL:

OUTSIDE CORNER - RAINSCREEN

HARDIE® TEXTURED PANEL

HARDIE® TEXTURED PANEL

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.04a

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

RAINSCREEN AIR GAP

LOW PROFILE OUTSIDECORNER TRIM

HARDIETRIM® BOARDS

EXTERIOR SHEATHING

WATER RESISTIVE BARRIER (HardieWrap™ or Equivalent)

DETAIL:

OUTSIDE CORNER - RAINSCREEN

HARDIE® TEXTURED PANEL

HARDIE® TEXTURED PANEL

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.04b

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

RAINSCREEN AIR GAP

LEAVE APPROPRIATEGAP AND CAULK

HARDIETRIM® BOARDS

LEAVE APPROPRIATEGAP AND CAULK

EXTERIOR SHEATHING

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

DETAIL:

OUTSIDE CORNER - RAINSCREEN

HARDIE® TEXTURED PANEL

HARDIE® TEXTURED PANEL

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.04c

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

RAINSCREEN AIR GAP

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

EXTERIOR SHEATHING

HARDIE® TEXTURED PANEL

HORIZONTAL ZFLASHING TRIM

NOTE:3/8" MINIMUM GAP IS RECOMMENDED TOACCOUNT FOR STRUCTURAL MOVEMENTBETWEEN FLOOR JOINTS.

DETAIL:

HORIZONTAL BREAK @ FLOOR TRANSITION - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.05a

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

1/4" GAP, DO NOT CAULK

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

INSTALL BUG SCREENAS NECESSARY

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

EXTERIOR SHEATHING

HARDIE® TEXTURED PANEL

HORIZONTAL ANGLEDT-FLASHING TRIM

NOTE:3/8" MINIMUM GAP IS RECOMMENDED TOACCOUNT FOR STRUCTURAL MOVEMENTBETWEEN FLOOR JOINTS.

DETAIL:

HORIZONTAL BREAK @ FLOOR TRANSITION - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.05b

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

1/4" GAP, DO NOT CAULK

CAULK

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

INSTALL BUG SCREENAS NECESSARY

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

EXTERIOR SHEATHING

HARDIE® TEXTURED PANEL

NOTE:3/8" MINIMUM GAP IS RECOMMENDED TOACCOUNT FOR STRUCTURAL MOVEMENTBETWEEN FLOOR JOINTS.

DETAIL:

HORIZONTAL BREAK @ FLOOR TRANSITION - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.05c

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

1/4" GAP, DO NOT CAULK

Z-FLASHING

HARDIETRIM® BOARDS

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

INSTALL BUG SCREENAS NECESSARY

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

EXTERIOR SHEATHING

HARDIE® TEXTURED PANEL

NOTE:3/8" MINIMUM GAP IS RECOMMENDED TOACCOUNT FOR STRUCTURAL MOVEMENTBETWEEN FLOOR JOINTS.

DETAIL:

HORIZONTAL BREAK @ FLOOR TRANSITION - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.05d

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

1/4" GAP, DO NOT CAULK

Z-FLASHING

LEAVE APPROPRIATE GAPAND CAULK

HARDIETRIM® BOARDS

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

INSTALL BUG SCREENAS NECESSARY

FOAM SEALANT SEALANT

EXTERIOR SHEATHING

SEALANT W/BACKER ROD

WATER RESISTIVE BARRIER(HardiWrap™ or Equivalent)

PIPE 1-1/2" OR LESS

DETAIL:

1-1/2" OR LESS PENETRATION TREATMENT - RAINSCREEN

HARDIE® TEXTURED PANEL

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.06

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

BLOCKING AS REQ'D

VENT OPENING

WATER RESISTIVE BARRIERHardieWrap™ or Equivalent

EXTERIOR SHEATHING

1/4" GAP, DO NOT CAULK

FLASHING

TRIM AROUND OPENING

TRIM AROUND OPENING

LEAVE APPROPRIATE GAPAND CAULK

DETAIL:

FIXTURE PENETRATION - RAINSCREENThese drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.07

4/2021

HARDIE® TEXTURED PANEL

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

HEADER

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

EXTERIOR SHEATHING

1/4" GAP, DO NOT CAULK

Z-FLASHINGNOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION

WINDOW FRAME

DETAIL:

WINDOW / DOOR HEAD - RAINSCREEN

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE®

Textured Panel

1.08a

4/2021

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE® TEXTURED PANEL

• Wood Framing with Wood Rainscreen Furring

INSTALL BUG SCREEN AS NECESSARY

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

HEADER

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

EXTERIOR SHEATHING

1/4" GAP, DO NOT CAULK

Z-FLASHING

HardieTrim® Boards

NOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION

WINDOW FRAME

DETAIL:

WINDOW / DOOR HEAD - RAINSCREEN

HARDIE® TEXTURED PANEL

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.08b

4/2021

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

INSTALL BUG SCREEN AS NECESSARY

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

NOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.

EXTERIOR SHEATHING

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

FLASH WINDOW PER MANUFACTURERRECOMMENDATION (If trim is protrudingbeyond window sill it must be flashed.)

WINDOW FRAME

WOOD FRAMING

INTERIOR SHEATHING

HARDIE® TEXTURED PANEL

DETAIL:

WINDOW SILL - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.09a

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

• Wood Framing with Wood Rainscreen Furring

NOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.

EXTERIOR SHEATHING

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

FLASH WINDOW PER MANUFACTURERRECOMMENDATION (If trim is protrudingbeyond window sill it must be flashed.)

WINDOW FRAME

J-TRIM

WOOD FRAMING

INTERIOR SHEATHING

HARDIE® TEXTURED PANEL

DETAIL:

WINDOW SILL- RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.09b

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

NOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.

EXTERIOR SHEATHING

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

FLASH WINDOW PER MANUFACTURERRECOMMENDATION (If trim is protrudingbeyond window sill it must be flashed.)

WINDOW FRAME

WOOD FRAMING

INTERIOR SHEATHING

DETAIL:

WINDOW SILL - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.09c

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® TEXTURED PANEL

HARDIETRIM® BOARDS

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

NOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.

EXTERIOR SHEATHING

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

FLASH WINDOW PER MANUFACTURERRECOMMENDATION (If trim is protrudingbeyond window sill it must be flashed.)

WINDOW FRAME

WOOD FRAMING

INTERIOR SHEATHING

LEAVE APPROPRIATE GAP AND CAULK

DETAIL:

WINDOW SILL - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.09d

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® TEXTURED PANEL

HARDITRIM® BOARDS

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)

EXTERIOR SHEATHING

FLASHING TAPE

DOOR / WINDOWJAMB

LEAVE APPROPRIATEGAP AND CAULK

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

NOTE:REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.

WOOD RAINSCREENFURRING (3/8˝ THICK MIN)

RAINSCREENAIR SPACE

DETAIL:

DOOR/WINDOW JAMB

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.10a

4/2021

HARDIE® TEXTURED PANEL

• Wood Framing with Wood Rainscreen Furring

EXTERIOR SHEATHING

FLASHING TAPE

DOOR / WINDOWJAMB

LEAVE APPROPRIATE

J-TRIM

GAP AND CAULK

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

NOTE:REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.

DETAIL:

DOOR/WINDOW JAMB

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.10b

4/2021

HARDIE® TEXTURED PANEL

WOOD RAINSCREENFURRING (3/8˝ THICK MIN)

• Wood Framing with Wood Rainscreen Furring

RAINSCREENAIR SPACE

EXTERIOR SHEATHING

FLASHING TAPE

DOOR / WINDOWJAMB

LEAVE APPROPRIATEGAP AND CAULK

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

NOTE:REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.

DETAIL:

DOOR/WINDOW JAMB

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.10c

4/2021

HARDIE® TEXTURED PANEL

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREENFURRING (3/8˝ THICK MIN)

RAINSCREENAIR SPACE

EXTERIOR SHEATHING

FLASHING TAPE

DOOR / WINDOWJAMB

LEAVE APPROPRIATEGAP AND CAULK

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

NOTE:REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.

DETAIL:

DOOR/WINDOW JAMB

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.10d

4/2021

HARDIE® TEXTURED PANEL

• Wood Framing with Wood Rainscreen Furring

RAINSCREENAIR SPACE

WOOD RAINSCREENFURRING (3/8˝ THICK MIN)

SOFFIT

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

INSULATIONWHERE REQ’D

EXTERIOR SHEATHING

CAULK

HARDIE® TEXTURED PANEL

WOOD RAINSCREEN FURRING(3/8" THICK MIN)

DETAIL:

WALL & SOFFIT - VENTED RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.11a

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

• Wood Framing with Wood Rainscreen Furring

SOFFIT

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

INSULATIONWHERE REQ’D

EXTERIOR SHEATHING

CAULKJ-TRIM

HARDIE® TEXTURED PANEL

DETAIL:

WALL & SOFFIT - VENTED RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.11b

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

• Wood Framing with Wood Rainscreen Furring

WOOD RAINSCREEN FURRING(3/8" THICK MIN)

NOTE:DO NOT USE HARDIE TRIMOR BOARD AS CAP FLASHING

METAL CAPPING

UNDERLAY TO PROVIDEISOLATION OF METAL

FLASHING TO FRAMING

WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)

INSULATION

HARDIE® TEXTURED PANEL

WOOD RAINSCREEN FURRING(3/8" THICK MIN)

WHERE REQ’D

EXTERIOR SHEATHING

DETAIL:

PARAPET WALL - RAINSCREEN

HARDIE® Textured Panel on Wood Framing

• OSB or Plywood Sheathing

HARDIE®

Textured Panel

1.12

4/2021

These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.

For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.

• Wood Framing with Wood Rainscreen Furring

INSTALL BUG SCREENAS NECESSARY