Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Wolff Industries Inc.2016/2017
Scissors, Knives,
Rotary and Round BladeSharpeners
andAccessories
Catalog
(800) 888-3832107 Interstate Park • Spartanburg, SC 29323
www.wolffind.com
2
Wolff Industries, Inc.Who We Are
Wolff Industries, Inc. is the world’s largest manufacturer of commercial scissors sharpeners. Wolff specializes in finding the correct angle, edges, and scissors style for your difficult cutting needs. Wolff ’s R&D department is constantly working to improve the cutting tools our customers use, along with improving ways to maintain these tools. Send us samples of your hard-to-cut materials and we will help you find the best tool for the job. Technical advice on all our products
is available at:
(800) 888-3832 or (864) 587-6008
E-mail: [email protected]
Monday-Friday, 8-5 Eastern Standard Time.
The hisTory of Wolff indusTries, inc.In 1957, Lee Wolff started a sewing machine, sales, and service business. Fabrics and a complete line of sewing needs were added in 1963 and the number of employees grew to 25 to handle the volume. During those years, Lee did a great deal of scissors sharpening and repair. He also made important modifications on the available scissors sharpening equipment.
Wolff Industries has continued this tradition and in the last few years has developed the rotary blade and round knife sharpener., Hira-To®, and Corru-Gator sharpening machines. Hand held sharpeners have also been developed, including the RPT-Kinectics and double bladed knife sharpener.
TWICE AS SHARP®, WOLFF®, OOKAMI GOLD®, ERGONOMIX®, and HIRA-TO®are registered trademarks of WOLFF INDUSTRIES, INC.
Any uses are forbidden without written permission.
Who W
e A
re
3
Index
Wolff Scissors Tester . . . . . . . . . . . . . . . . . 4
Dust Collector . . . . . . . . . . . . . . . . . . . . . 5
Twice as Sharp® . . . . . . . . . . . . . . . . . . 6-7
Corru-Gator . . . . . . . . . . . . . . . . . . . . . 8-9
Ookami Gold® . . . . . . . . . . . . . . . . . 10-11
Hira-To® . . . . . . . . . . . . . . . . . . . . . . . 12-15
Wheels . . . . . . . . . . . . . . . . . . . . . . . 16-19
Wheel Accessories . . . . . . . . . . . . . . . . 20
Wolff’s Training Course . . . . . . . . . . . . . 21
Clamps and Replacement Parts . . 22-25
Ookami® Convexing Clamp . . . . . . . . 25
Instructional DVDs . . . . . . . . . . . . . . . . . 26
Twice as Sharp® Arms . . . . . . . . . . . . . . 27
RPT-Kinetics Knife Sharpener . . . . . . . . 28
Sharpener Case . . . . . . . . . . . . . . . . . . 29
Sharpening Accessories . . . . . . . . . 29-35
Safety Equipment . . . . . . . . . . . . . . . . . 35
Specialty Tools . . . . . . . . . . . . . . . . . 36-39
Clipper Blade Sharpener . . . . . . . . . . . 40
Clipper Sharpening Accessories . . . . . 41
Tru Hone® Knife Sharpener . . . . . . . . . . 42
Friedr Dick® Knife Sharpener . . . . . . . . 43
Rotary Blade Sharpener . . . . . . . . . 44-45
Clipper Shack’s Nail Nipper Sharpener. . 45
Corru-Gator . . . . . . . . . . . . . . . . . . . . . . 46
Ookami Gold® . . . . . . . . . . . . . . . . . . . . 47
Dust Collector . . . . . . . . . . . . . . . . . . . . 48
All prices FOB Spartanburg, SC.Prices and specifications are subject to
change without notice.
Order by 1pm EST for Same Day Shipping
(on most orders)
Shipping ChargesAll Orders ................... actual freight
30 Day Money-Back GuaranteeIf you are not completely satisfied, return the items within 30 days and receive a
prompt refund.
Return items to:Wolff Industries, Inc.107 Interstate Park
Spartanburg, SC 29303
Upon prior approval,returns after 30 days are subject
to a restocking fee.
Order Online at:
www.wolffind.com
4
Wolff Scissors Tester
quality control for your scissors
• Certify the quality of your scissors sharpening
• Measures the cutting pressure the full length of the blade from pivot to tip
• Plots cutting pressure on graph comparing to standards
• Test material simulates cutting through 1 ½” thickness of chicken
• Know when to sharpen your scissors
• Verify online sharpening methods improve the cutting edge
• Data from test is saved and available for review from secure website
Order part # WST-1000
WO
LF
F S
ciss
ors
Tes
ter
800-888-3832 www.wolffind.com
Made in the U.S.A.
5
Du
st Collecto
rDust Collector
# DC-1000
Made in the U.S.A.
• Cyclonic dust collection system
• Merv 8 filter traps 70% - 85% particles size of 3 – 10 microns
• Plenum and ducting for Twice As Sharp® (new red model)
• Keeps shop cleaner and reduces health risks
• 60 Hz • 110V 3.7A • 407W
• Box of 12 Filters#DC-FILTER
6
Scissors Sharpening System
Features• Free-floating arm system and sealed bearings provide years of maintenance free
use.
• Eye shields, wheel covers, and finger guards for safety.
• Honing wheel or standard buffing wheel produces shears 2-6 times sharper-than-new.
• Shears-Lock clamp opens wide for thick blades and self-adjusts for blade taper.
• ½ inch wide sharpening wheel, 100 grit friable aluminum oxide grain structure prevents burning.
Accessories Furnished• safety glasses • dust mask
• scissors lubricant • operator’s manual • pink hone • wheel dresser • sales poster
• eye shields • hex wrench • angle gage • training DVD
WO
LF
F T
wic
e as
Sharp
®
Full Two Year
Warranty
Covers parts and labor on
defects in workmanship and
materials.
TwiceAsSharp.com
TwiceAsSharp.com
7
Specifications• 14 inch stroke without reclamping• WEIGHT: Boxed 14 pounds, unit only 12 pounds• VOLTAGE: 110-130 a.c. 60 cycle. Wattage 375, 3450 rpm can be set to run on 220-240
a.c. 50 cycle 3000 rpm.• MOTOR: ¼ H.P. condenser run. TENV 100% duty cycle.• BEARINGS: Precision ball bearings. Double-sealed (SKF 6202-2RS1 or equivalent).• ARMS: Double-sealed Rulon® bearings, no maintenance required.• SHARPENING WHEEL: 5 in. x ½ in. x ½ in. 100 grit fine grain friable aluminum oxide.• HONING WHEEL: Cotton impregnated with fine silicon carbide.• BUFFING WHEEL: Nylon impregnated with fine silicon carbide.• SHARPENING ANGLES: 0 to 57 degrees.• CLAMP OPENING: .6 in.
WO
LF
F T
wice a
s Sharp
® Models
• THE PROFESSIONAL MODEL This model comes with all the accessories as listed on page 6, plus a professional honing wheel, which sharpens pet grooming, high quality fabric shears, and low priced barber and beauty shears.
Part # PRO-TAS Part # PRO-W-TAS (with wide clamp)
• THE INDUSTRIAL MODEL This model comes with all the accessories as listed on page 6, plus an industrial honing wheel, which sharpens industrial shears quickly without a shiny cosmetic edge.
Part # IND-TAS Part # IND-W-TAS (with wide clamp)
• THE STANDARD MODEL This model comes with all the accessories as listed on page 6, plus a buffing wheel, which sharpens fabric, home, and industrial shears.
Part # STD-TAS Part # STD-W-TAS (with wide clamp)
• NO WHEELS MODEL This model comes with eye shields, wheel covers, and finger guards. It also includes the arm system and clamp needed for the person purchasing an additional motor.
Part # NW-TAS
Models
800-888-3832 www.wolffind.com
U.S. Patent # 4,528,778German Patent # DE 3490 065 C2
Canadian Patent # 1 243 487Specifications subject to change without notice.
8
The
Corru
-Gato
r
800-888-3832 www.wolffind.com
The Corru-Gator offers the fastest, easiest, and most efficient method of corrugating your scissors and shears.
• 3/4 in. Diamond plated spiral corrugating wheel.• 0.21 Amp impedence protected cooling fan.• 1 Amp, 1700 RPM motor, 377 RPM for the corrugating wheel.• Used in conjunction with the Twice As Sharp® scissors sharpener.• Cogged belt with step down gear.• Comes with standard Twice as Sharp® free-floating arm system.• Shears-lock clamp included with the Corru-Gator opens wide for thick blades and
self-adjusts for blade taper.• Accessories pack included.• U.S. Patent # 7465220
TheCorru-GatorUsed in conjunction
with the
Twice As Sharp®
# CGTR-110 110 volt corrugator that cuts fine teeth# CGTR-230 220 – 240 volt corrugator that cuts fine teeth# CGTR-110C 110 volt corrugator that cuts course teeth# CGTR-230C 220 – 240 volt corrugator that cuts course teeth
Corru-Gator.com
9
The C
orru
-Gato
r
800-888-3832 www.wolffind.com
See page 27 if you need a replacement arm. See pages 22-25 if you need a replacement clamp or clamp parts.
Fine Tooth Corrugating Wheel• Diamond plated• 3/4 in.• Approximately 72 teeth per inch• Typically lasts for 100-200 scissors
# 7002270
Example of corrugated blade
Course Tooth Corrugating Wheel • Diamond plated• 3/4 in.• Approximately 48 teeth per inch• Typically lasts for 100-200 scissors
# 7002271
10
OO
KA
MI
GO
LD
®
OOKAMI GOLD® Complete package
includes:
• OOKAMI GOLD® sharpener• OOKAMI GOLD® polishing
wheel• OOKAMI GOLD® polishing
compound• OOKAMI GOLD® honing
block kit• Diamond sharpening wheel
800 grit• Practice beauty shears • Shears-lock clamp• Deluxe screw pliers kit• Set adjusting tool• Repair parts kit• Angle gage• UFO pivot adjusting tool• Fine white hone• Standard sharpening wheel• Professional honing wheel• OOKAMI GOLD® and
industrial instructional DVDs• Professional operator’s and
OOKAMI GOLD® manuals
Scissors Sharpening System
Model # OGC-TAS
Suggested Add-on:
Complete OOKAMI® Convexing Clamp# 30009
OOKAMI GOLD® convexing clamp is used to speed up the sharpening process on Japanese
style convex edge beauty shears.
See page 25 for more information
®
11
OO
KA
MI G
OL
D® P
ack
ages
OOKAMI GOLD® Packages include:
OGC-TAS OGA-TAS OGS-TAS OGU-TAS
OOKAMI GOLD® Sharpener X X XOOKAMI GOLD® DVD X X X XOOKAMI GOLD® Manual X X X XOOKAMI GOLD® Polishing Wheel X X X XOOKAMI GOLD® Polishing Compound X X X XOOKAMI GOLD® Honing Block Kit X X XDiamond Sharpening Wheel 800 grit X X X XPractice Beauty Shears X X X XShears Lock Clamp X X XDeluxe Screw Pliers Kit X X XSet Adjusting Tool X X XRepair Parts Kit X X XAngle Gage X X X XFine White Hone X X X XWheel Dressing Brick XStandard Sharpening Wheel XProfessional Honing Wheel XIndustrial Instructional DVD XProfessional Operators Manual X
The OOKAMI GOLD® upgrade package is for the sharpener who wants to sharpen convex shears and does not need an additional motor. The wheels and parts of this package fit on the “Twice as Sharp® scissors sharpening system. This package con-tains all the special tools needed to sharpen convex shears.
# OGU-TAS
These items are included in the upgrade kit
12
Hir
a-T
o®
The Ultimate in Beauty Shear Sharpening!
Convex faster and easier with Wolff’s Hira-To® flat hone
Features• Forward, stop, and reverse switching• 0-2500 RPM variable speed• Electronic shaft break• LED quick connect lamp• Patented flat hone fixture• Arm technology is licensed from Roger Kaye-Rapid Edge, Inc.• Manufactured by Wolff Industries, Inc.• Rotating head and shaft contoured for comfort• Engraved angle settings from 25° to 65° • Sharpens both right and left hand shears
HIRA-TO®
# HIRA-TO-PSA 110 volt with pressure sensitive adhesive disc
# HIRA-TO-HL 110 volt with hook and loop disc
# HIRA-TO-PSA-240 220 – 240 volt with pressure sensitive adhesive disc
# HIRA-TO-HL-240 220 – 240 volts with hook and loop disc
13
Hir
a-T
o®
Ergonomically Correct
LED Lamp
Accurate Angle Every Time
Variable Speed
Accessories
Create a factory look and a
factory edge!
Right & Left Fixture
THE MOST ADVANCED SINGLE HEAD FLAT HONE ON THE MARKET!
14
Hir
a-T
o® A
cces
sorie
s
Hira-To® comes with:• 80 micron discs (6) • Laser cut plates• 60 micron discs (6) • Practice shears• 30 micron discs (6) • Shears lube• 15 micron discs (6) • Training DVD• 9 micron discs (6) • Owner’s manual• 1 felt pad with diamond paste • Ceramic water stone• Safety goggles • Dust mask
All discs available in PSA(Pressure Sensitive Adhesive) or Hook & Loop
Hira-To® Accessories
HIRA-TO®
Fixture AssemblyFor use with other flat hone systems to sharpen
convex edge Japanese beauty shears.
# Hira-To Fixture
Waterstone Holder
#FH-50500
Waterstone
#FH-50503
800-888-3832 www.wolffind.com 15
• Felt Pad# FH-FP• Diamond Paste# FH-DP
Hir
a-T
o® A
ccessories
• 9 Micron 3M Disc# FH-PSA-9 (PSA)# FH-HL-9 (Hook & Loop)
• 15 Micron 3M Disc# FH-PSA-15 (PSA)# FH-HL-15 (Hook & Loop)
• 30 Micron 3M Disc# FH-PSA-30 (PSA)# FH-HL-30 (Hook & Loop)
• Korean 15 Micron Disc# FH-PSA-1200 (PSA)# FH-HL-1200 (Hook & Loop)
• Korean 9 Micron Disc# FH-PSA-2000 (PSA)# FH-HL-2000 (Hook & Loop)
• 60 Micron 3M Disc# FH-PSA-60 (PSA)# FH-HL-60 (Hook & Loop)
• 80 Micron 3M Disc# FH-PSA-80 (PSA)# FH-HL-80 (Hook & Loop)
• Back-Up Pad• For PSA# FH-7303 (PSA back-up pad only)# FH-PSA-PLATE (with metal plate)
• Back-Up Pad• For Hook & Loop# FH-7304 (hook & loop back-up pad only)# FH-HL-PLATE (with metal plate)
* Add -PK to end of part number for 25 piece pack of Micron Discs
• Korean 30 Micron Disc# FH-PSA-500 (PSA)# FH-HL-500 (Hook & Loop)
16
• Standard Sharpening Wheel• Best sharpening results - stainless and carbon
steel scissors: 100-120 grit• Save 10% when you purchase 10 or more
sharpening wheels
• Standard Buffing Wheel• Good for: Fabric and home use scissors• Excellent for polishing burrs off sewing hooks and
other items
• Industrial Honing Wheel• Great for honing larger shears (8 in. to 12 in.)• Quick and easy to use• Recommended for industrial use
• Professional Honing Wheel• Recommended for: Pet grooming Fabric Lower priced barber and beauty shears• Outlasts 2-3 standard buffing wheels
Whee
ls
# 27000
# 25000
# 25280
# 25200
17
Wheels
• Diamond Sharpening Wheel• Good for: Small scissors Carbide Inserted medical scissors Barber/Beauty shears
• Less metal removed with fine grit size of wheel
• Uses: 400 grit: General purpose 800 Grit: Expensive, finely finished barber and beauty shears
• 5 in. x ½ in. x ½ in.• Comes with surface ground flange and aluminum oxide cleaning stick
Grit Size Part Number 240 # 27324 400 # 27340 600 # 27360 800 # 27380
800-888-3832 www.wolffind.com
• Lawnmower Blade Sharpening Wheel• 46 Grit silicon carbide - removes stock quickly
• OOKAMI GOLD® Polishing Wheel• Replacement polishing wheel for OOKAMI GOLD®
sharpening system
• For use with Ookami® polishing compound, see page 30
Free Technical SupportIf you have any sharpening questions, call us toll free at 800-888-3832. Our staff has many years of sharpening and scissors manufacturing experience and we can answer most sharpening questions. We also have an excellent research department that can analyze and make recommendations to solve most any cutting problem.
# 25100
# 27146
18
Whee
ls
• 220 Grit Wheel Set• Manufactured by Wolff Industries to fit
the Tru Hone® knife sharpener
# 51000
• 100 Grit Wheel Set• Manufactured by Tru Hone® to fit
the Tru Hone® knife sharpener
# 51100
• Friedr Dick® Ceramic Wheels
# FD-150-CER
• Friedr Dick® Diamond Wheels
# FD-150-DIA
To fit the Friedr Dick® Knife Sharpener
To fit the Tru Hone Sharpener
19
Wheels
800-888-3832 www.wolffind.com
• 240 Grit Diamond Wheels• Manufactured by Tru Hone® to fit the
Tru Hone® knife sharpener
# 51222
• 1000 Grit Ceramic Wheels• Manufactured by Tru Hone® to fit
the Tru Hone® knife sharpener
# 51221
• Dress the wheels for the Tru Hone® Knife Sharpener• Brings back the smooth, even cutting you had when the wheels were
new, 100/220 grit only# WHL DRESS
Send your bumpy, out-of-round wheels to Wolff Industries and we will make
them round again. Wheels measuring 2 ¼ in. or less are too small.
20
• T-Bar Wheel Dresser• Diamond plated• Used to dress out-of-round wheels# T-BAR
• Dressing Brick• Used to dress out-of-round wheels
# 20620
• Rust Eraser• Used to remove rust
# ERASER
• Diamond Wheel Cleaning Stick• Made of aluminum oxide• ½ in. x ½ in. x 3 in.• Used to clean diamond wheels
# 20625
Whee
l A
cces
sorie
s
The T-BAR and
Dressing Brick are not for use on diamond
wheels
21
Professional Scissors Sharpening TrainingWolff Industries’ Training Center provides a “hands on” scissors sharpening course. The Training Center is staffed and equipped to provide training to those wishing to acquire professional scissors sharpening and reconditioning skills. We maintain a SMOKE FREE environment and limit class attendance to ensure an enjoyable and beneficial course of personalized, individual instruction. This is an excellent opportunity to learn how to sharpen for profit, to hone your sharpening skills, and to have your sharpening questions answered.
Instruction available on:• Types and styles of shears• Safety while sharpening
• Operation of Twice as Sharp® Scissors Sharpener• Operation of OOKAMI GOLD® Scissors Sharpener
• Operation of Hira-To® Flat Hone Sharpener• Operation of Corru-Gator Sharpener
• Clipper Blade Sharpening• Sharpener maintenance
• Sales and marketing
*See price list for Course fee.
This is a one or multi day course, tailored to fit your individual needs!
8:30 am - 4:30 pm
Call us for class dates and times at 1-800-888-3832
Wolff’s T
rain
ing C
ou
rse
Glen Burke Jim O’Donnell
22
Cla
mps
• Shears-Lock Clamp
• Original Twice as Sharp® clamp • Adjusts to various tapers of scissors
blades
# 30004
• Narrow Clamp
• Great for small surgical, embroidery, and curved scissors
# 30005
• Wide Clamp
Holds:• Chisels, osteotomes, and other
similar tools up to ½ in. thick and 1 ½ in. wide
• Lawnmower blades• Paper cutter blades• Larger shears (10 in. to 12 in.)
# 30003
23
• Ergonomic Shears-Lock Clamp
# 30007
• Ergonomic knob
• Covered with soft rubber
• Comfortable fit in hand
• Requires less pressure to tighten
Cla
mps
800-888-3832 www.wolffind.com
For our OOKAMI® Convexing Clamp, see page 25
• Ergonomic Narrow Clamp
# 30008
• Ergonomic Wide Clamp
# 30006
24 800-888-3832 www.wolffind.com
Cla
mps
• Upper Jaw for Narrow Clamp# 32005
• Upper Jaw for Wide Clamp# 32003
• Lower Jaw for Shears-Lock Clamp# 33004
• Lower Jaw for Wide Clamp# 33003
• Lower Jaw for Narrow Clamp# 33005
• Upper Jaw for Shears-Lock Clamp# 32004
• Large Regular Knob for Clamp• Spacers and spring included
# 36000
• Small Knob for Upright• Spacers included
# 36500
25
Cla
mps
• Ergonomic Knob• Covered with soft rubber• Comfortable fit in hand• Requires less pressure to tighten• Spacers and spring included
# 36001
• Upright with Knob and Spacers# 34000
OOKAMI GOLD® Convexing Clamp Replacement Parts
Upper jaw and detent
# 32009Detent block with stop and set screws
# 31009
* Also availablePivot shaft with nylon washer, e ring, and c washer
# 34009
Lower jaw
# 33009
OOKAMI GOLD® Convexing Clamp
For sharpening Japanese style convex edge beauty shears.
• The Ookami Gold® Convexing Clamp allows a convex shear to be polished all the way up the spine.
• It has been designed with a stopping point that allows you to set a specific angle and then rotate up from that stopping point to the top of the spine.
• Allows you to use a step up grind with the clamp in 3º or 4º increments and with free rotation of the clamp.
Complete OOKAMI® Convexing Clamp
# 30009
26
Inst
ru
ctio
nal
Vid
eos
and M
anu
als
*All manuals are available online (as a pdf) and can be found in the information section of the website.
Videos Part #Classic Twice As Sharp® Industrial DVD- Original 55 minute DVD by Lee Wolff # 28105-D
Industrial Twice As Sharp® Instructional DVD - 23 minute training DVD
# 28105-ID
Huff’s Clipper Repair DVD# HUF-DVD-Stewart# HUF-DVD-59 (OSTER Finishes)
Huff’s Extreme Machine Clipper Blade Sharpener DVD # HUF-DVD-21
Hira-To® Instructional DVD # FH-DVD
Rotary Sharpener Instructional DVD # RS-VIDD
OOKAMI GOLD® Industrial DVD - 50 minute training DVD # 28401-D
Clipper Blade Sharpener Industrial DVD # Video-101D
The Corru-Gator Instructional DVD # 702600
Manuals Part # Twice As Sharp® Operator’s Manual
# TAS-12000# TAS-12000S (Spanish)
Hira-To® Operator’s Manual # FH-MANUAL
OOKAMI GOLD® Operator’s Manual # 13000
Corru-Gator Operator’s Manual # 7002500
Rotary Sharpener Operator’s Manual # RS-MAN
Instructional DVD’s
TWICE AS SHARP
Scissors Sharpening System
Customer Service 1-800-888-3832
Professionally Sharpen Scissors
manufactured by WOLFF
INDUSTRIES
Operator’s Manuals
27
• Long Arms• Great for sharpening items 14 in. to 32 in. long• Good for paper cutting blades
# 49000 for teal TAS®
# 49000-15 for red TAS®
• Arm Screws and Washers• Washers to adjust the arm height
# 44901 for teal TAS®
# 44901-15 for red TAS®
The use of machinery or parts made by Wolff Industries, Inc. on other machinery or in connection with parts not made by
Wolff Industries, Inc. can expose the user to bodily injury.
Some manufacturers make machinery with reversible motors which could eject sharpened shears or throw grit, metal, or
other harmful objects into the eyes or face of the user.
• Replacement Arm Set• Exchange only• $40.00 credit when “worn” arm
is returned
# 40000 for teal TAS®
# 40000-15 for red TAS®
Our policy is not to sell replacement arms separate from the sharperner. They are not made to be used on any other type of equipment. Any such use will
void the warranty.
The arms can wear after several years of use. We know that you cannot be without your sharpener, so we offer you a trade in plan.
Return worn arm for a $40 credit.
Warning
Tw
ice As S
harp
® Arm
s
28
RP
T-K
inet
ics
Knif
e S
harpen
er
800-888-3832 www.wolffind.com
RPT-Kinetics Knife Sharpener •The best knife sharpener for all your kitchen, santoku, hunting, and
pocket knives.
Hot Pink with Grey Handle
#RPT-PNK-GRYWhite with Blue
Handle# RPT-WHT-BLU
Red with Black Handle
# RPT-RED-BLK
Yellow with Green Handle
# RPT-YLW-GRN
• Made in the USA.
• Simple 3 step process.
• Utilizes reverse polarity technology.
• Sharpens both straight edge and serrated knives
• Can be used both in the kitchen AND while you’re hunting in the field.
29
Wolff Carrying Case• Made of reinforced ballistic material• Wolff machine logos screen printed on front• Customizable foam insert to fit any Wolff sharpening machine and
accessories• Additional storage pockets inside case• Interior tie down strap securely holds machine in place• Case is fitted with a handle and shoulder strap• 20” wide x 14” deep x 12” high
Sharpen
ing A
ccessories
Foam can be pulled out for custom fits
Case with foam: # 24950
Foam insert only: # 24955
30
Sharpen
ing A
cces
sorie
s
• OOKAMI GOLD® Honing Block Kit
# 20651
Also Available:(sold separately)OOKAMI GOLD®
• Honing block (1) # 20650• Deburr cloth (1) #20660• Finish cloth (1) # 20665
• Chamois Scissors Wipes
• 3 pieces 5 in. x 7 in.
# 23510
• OOKAMI GOLD® Polishing Compound• 1 pound• Use on OOKAMI
GOLD® polishing wheel
# 23201
• FLITZ®
• Metal polish, fiberglass, and paint restorer. Lasts up to 6 months!
• Non-Abrasive• Non-Toxic• Non-Flammable
# FLITZ-50 (50 gram tube)
MSDS information can be found on Wolff’s website.
31
Sharpen
ing A
ccessories
• Scissors Repair Parts Kit - Plastic Case• Assortment of 24
repair parts
# 21600• Scissors Repair Parts Kit• Assortment of bumpers, rides,
and washers
# 21500
• Ickee Stickee Unstuck• Fresh citrus scent• Non-solvent; 100%
biodegradable• Removes spray adhesive,
gum, tar, oil, and marker
# 20900
• Scissors Lubricant 1.25 ounces
• Washes away dirt and debris from under the pivot and leaves a waxy coating
# 20700# 20715 (empty bottle)
• Thread and Nut Lock 0.338 ounces
• Locks screws in place, but still adjustable. Screw will not work loose with normal use.
• Cure time 24 hours
# 23301
• Scissors Lubricant 16 ounce refill
# 20800# 20800C(California Only)
800-888-3832 www.wolffind.com
*MSDS information can be found on Wolff’s website.
32
• String Tags• Keeps scissors matched
to your customer• Tags include serial numbers and
are perforated.• 500 tags per package
# 23010
Sharpen
ing A
cces
sorie
s
• Hone (pink)• Made of pink diamonite• Removes damage on inside of
cutting edge of scissors
# 20600
• Fine Hone (white)• Fine ceramic hone that removes
burrs without damaging the cutting edge
• Good for high quality barber and beauty shears
# 20601
• Magni-Focuser® Model 104: Power of 2.00 x 10 in. working distance Diopter or +4D
• Shatter resistant optical quality acrylic lens• Adjustable contoured padded vinyl
headband• Lightweight binocular magnifier
# MAG104Styles and color may vary based on Manufacturer’s availability
“Iron sharpens iron, So one man sharpens another.”
Proverbs 27:17 (NASB)
33
Sharpen
ing A
ccessories
• 100 Watt Lamp• Good light source for seeing burrs and cutting edges
• 24 in. flexible arm• 3 mounting options
• Attaches to Twice As Sharp®
# 23501 Color may vary
• Dual Lens Magnifier• 18 in. flexible arm• Dual power lens (2x and 4x)• Attaches to Twice As
Sharp®# 23503
Color may vary
• Mounting stud pack for 23501 and 23503
# 23504
800-888-3832 www.wolffind.com
Magnifier Shade LampThe 100 Watt Lamp is pictured here with the single lens shade mount. A dual lens shade mount is also available and is attached to the lamp the same way as the single lens.
• Magnifier Dual Lens (2x and 4x) shade mount for 23501
# 23505• Magnifier Single Lens (2x) shade mount for
23501
# 23506Color may vary
34 800-888-3832 www.wolffind.com
Sharpen
ing A
cces
sorie
s
• Deluxe Pliers Kit• Contains pliers, 8 bits, and thread
and nut lock.• Protective plastic case
# 20940
Deluxe Pliers Box Only#20941
• Standard Pliers Kit
• Designed to turn the screw without slipping or damaging
the slotted head• Includes pliers and 2 bits (9/64 in. and
7/32 in.)• Resealable plastic sleeve
# 20920
• 8 Piece Standard Fluted Bit Set# 20959
Bit Size Part Number
0-1 7/64 in. 209501-2 1/8 in. 209512-3 9/64 in. 209523-4 5/32 in. 209534-5 3/16 in. 209545-6 7/32 in. 209556-8 1/4 in. 20956
8-10 9/32 in. 20958
Order Online at:
www.wolffind.com
• Angle Gage• The “Golden Rule” for cutting angle measurements• Quick reference chart for industry cutting angle standards
# 23000
35
Safety
Equ
ipm
ent
• Safety Glasses• Protects your eyes while sharpening
# 20300Styles may vary based on manufacturer’s availability
• Face Mask• Protects your lungs while sharpening
# 20200Styles may vary based on manufacturer’s availability
• 4 ½ in. Adjustable Pliers• Works well on slotted nuts on pinking shears
# 20910
“If the axe (iron) is dull
and he does not sharpen its edge,
then he must exert more strength.
Wisdom has the advantage
of giving success.”
Ecclesiastes 10:10 (NASB)
36
Spec
ialt
y T
ools • Diamond Corrugating File
# 22200
• Diamond File • Fits corrugating fixture
# 22201
• Course Diamond File# 22300
• Course Diamond File • Fits corrugating fixture
# 22301
• # 2 Chequering File• Course teeth• Good for fabric or
industrial style shears
# 22110
Example of Corrugations on Scissors Blade
• Sales Poster• Durable, fade resistant, heavy
weight plastic• Brightly colored in red and white
# 20400
• Sharpening Poster• Laminated 18 in. x 26 in. poster• Outlines scissors sharpening steps• Spanish version on opposite side
# PSP100
37
Specia
lty T
ools
800-888-3832 www.wolffind.com
• Panavise®
• Nylon jaws to prevent scratching• Tilts, rotates, or turns in any direction to match
the angle on scissors to be corrugated• Screws to work bench for easy access
# 23400
• Panavise® Low Base
• Base is 1 in. lower than the standard one
# 23410
• Replacement Nylon Jaws
• Prevents scratching fine scissors
# 23441
• Replacement Head• To replace your Panavise®
# 23440
• Panavise® Bench Clamp
• Vise screws to the clamp which can be attached to any work surface
# 23420
38
Spec
ialt
y T
ools
Scissors Press Accessory-Complete• Use to put set in larger scissors• Complete accessory includes 1 Ton Arbor Press by
Dayton
Press is drop shipped from Grainger® (Contiguous USA only)Kit is shipped from Wolff Industries
# SPA111Manufacturer may substitute a newer model with a different design but same function
Scissors Press Accessory (without press)• Kit includes: hardened pin, plate, and neoprene block.• Install on your own 1 Ton Press made by Dayton available from Grainger®: Part # 4Z328
# SPA110
No Good - No gap under the pivot. One blade is straight and the other has too much set (curve).
No Good - The blades come together in the middle and leave a gap near the tips that will not cut.
Good - There is gap under the pivot and proper set to the tips. Gap = 0.006 - 0.012 in. (2-4) Sheets of paper.
• Set Adjusting Tool• Perfect for adjusting the set of smaller
scissors blades• Ideal for barber, beauty, and grooming
shears• Durable and tough polyurethane• Does not damage finish on edges• Screw to work bench for use
# 23110
• Brass Set Adjusting Tool• Ideal for industrial shears• Durable brass• Does not damage finish on edges• Screw to work bench for use
# 23111
39
Specia
lty T
ools
• Handle Bender• Easily bends shears handles to match tips• Use on small metal handled scissors or shears• Reduces chance of handle breakage
# HB-01
• Brass Hammer• Weighs 26 ounces• Soft brass will not damage the
finish on shears• Use for set adjusting and sizing
handles
# 23100
• Small Drill Bit - 2.2 mm# 21590
• Small Drill Bit - 2.45 mm• Right size for reaming or drilling holes for
bumpers and silencers
# 21591
• 5/32 in. Allen Wrench• Use to adjust arm assembly
# 20500
40
Cli
pper
Bla
de
Sharpen
er
800-888-3832 www.wolffind.com
Available in the following models and sizes:
# CS-101 – Base model with 14” cut aluminum plate
# CS-101-220 – 220 volt base model with 14” cut aluminum plate
# CS-101-16 – Base model with 16” cast aluminum plate
# CS-101-21K – Ultimate model with 21” cast aluminum plate for high volume sharpening
# CS-102 – Small portable 10” model best suited for the stylist industry
# CS-102-220 - 220 volt small portable 10” model best suited for the stylist industry
CS-101Professional Clipper Blade Sharpener
• Take the guess work out of sharpening hollow ground blades
• Sharpen 800-1000 blades on each side of the plate
• 14” double-sided precision ground aluminum plate included
• 16” double-sided cast aluminum plate available for increased production
• Manufactured and drop shipped from Nebraska Blades
• 90 minute training DVD included
• Accessories included
• Dust guard available
41
Clip
per
Bla
de S
harpen
er A
ccessories
new!Spring Tension Adjusting Tool
(STAT)for adjusting clipper blades
Easily slip cutter blade back into place
Add tension to each side of spring• Add tension to a clipper blade’s spring
without having to take the whole clipper blade apart
• T-Bar design of the tool allows you to apply force with little effort
• Great time saving tool
# WCL0001
# DC-101 – Dust Collector
CS-101Dust Collector
• For a cleaner and safer sharpening experience
• Compatible only with CS-101 models
• De-Magnetizer• Removes small magnetized metal
particles from clipper blades• 110 Volt• Drop ships from supplier
# DM-101
• Grit Applicator Pad• Used to apply grit to
clipper blade sharpener
# GAP-101
42
Tru
Hone®
Knif
e S
harpen
er
• Tru Hone® Knife Sharpener• Variable speed
• Professionally sharpens knives
# TRUHONE (110 volt)# TRUHONE2 (220 volt)
• Tru Hone® Accessories
• Knife Sharpening Poster
# 51215
• Drive Belt Replacement Tool
# 51211
• Drive Belt for Tru Hone®
# 51210
• Dress the wheels for the Tru Hone® Knife Sharpener• Brings back the smooth, even
cutting you had when the wheels were new. 100/220 grit only.
# WHL DRESS
Send your bumpy, out-of-round
wheels to Wolff Industries and we will make them round again.
Wheels measuring 2 ¼ in. or less are too small.
Other replacement parts are available for your Tru Hone®.
Call Wolff for more info.
See pages 18 and 19 for replacement wheels.
43
Fried
r D
ick® K
nife S
harpen
er
# FD-150DUO• The RS-150 DUO Knife Sharpener
• Easy and safe to operate with heavy duty design• Honing wheels produce ultra-smooth edge • High edge retention guaranteed• Optimum grinding angle is already set on the machine• Knives are quickly reground by the grinding wheels• Low rotation speed of wheels ensures that the knife blade does not
get too hot during the grinding process• Counter running grinding wheels for high precision and safety• See page 18 for replacement wheels
Order by 1pm EST for Same Day Shipping
(on most orders)
30 Day Money-Back GuaranteeIf not completely satisfied, return the items
within 30 days and receive a prompt refund.
44
Rota
ry
Bla
de
Sharpen
er
Rotary Blade Sharpener RSQ-FIX RSQ-COM RSQ-PRO RSL-FIX RSL-COM RSL-PRO
A Rotary Blade Sharpening Fixture(Includes plate, rails, and head assembly)
X X X X X X
B RS-0212 Gold Holder X X X X X XC RS-0211 Blue Holder X X X X X XD RS-0214 Green Holder X X X X X XE RS-0213 Red Holder X X X X X XF RS-0216 28mm Holder X X X X X XG Motor X XH RS-0201 Riser Blocks (2) X X XI RS-DUSEN Dusenbury Holders X X XJ Large Blade Holders - 2 sizes X X X Pro Honing Wheel X X Ookami Gold® Polishing Wheel X X X X Compound X X X X PRO-TAS (includes motor, sharpening wheel, and honing wheel)
X X
27000 Sharpening Wheel X
*Letters correspond to pictured parts.
# RS-Custom - Send us your large round knives and we willl make a custom sharpener for you.
Rotary Blade SharpenerSharpen 28mm, 45mm,
and 60mm rotary blades
• RSQ-FIX fixture only for sharpening quilting blades using your current Twice As Sharp® machine.
• RSQ-COM fixture, motor, and wheels• RSQ-PRO fixture and professional Twice As Sharp®
scissors sharpener
Sharpen 4” – 17” blades• RSL-FIX fixture only for sharpening larger
blades, includes riser and adaptors for quilting blades
• RSL-COM fixture, motor, and wheels for all rotary blades
• RSL-PRO fixture and professional Twice As Sharp® scissors sharpener
U.S. Patent 7,008,308,307A
G
45
Rota
ry
Bla
de S
harpen
er
Rotary sharpener sharpening large blade
Rotary sharpener sharpening 28mm quilting blade
Call Wolff Industries, Inc. at 1-800-888-3832 for more information and for
help with blade specifications.
B
C
J
D
E
F
H
I
Clipper Shack’s Nail Nipper Sharpening System
Add to your sharpening business by sharpening podiatry and
cuticle nippersIncludes:
• Nipper sharpening system with its motor
• Foot controller
• Two clamps
• You also get the “Y” slide
• Doubled sided sharpening disk
• 40 minute detailed instructional DVD
• Anvil and a spacer
• Owners manual, warranty cards, written instructions, and tips sheets
• The sharpening wheel
# NIPPER110 (110 Volt)# NIPPER220 (220 Volt)
The sharpening wheel will last approximately 1,500 to 3,000 nipper sharpenings (if used properly).
46
Reversable
for left hand
scissors
The Corru-GatorCorru-Gator.com
See page 8 for more details.
The Corru-Gator offers the fastest, easiest
and most efficient method of corrugating your scissors and shears!
46
For sharpening the
world’s finest scissors
and shears!
OOKAMI GOLD® Completew
ww
.wolffind
.com
See pages 10-11 for more details.OokamiGold.com 47
Dust CollectorOptimized to work with your Twice As Sharp® to keep your
shop cleaner and safer!
See page 5 for more details.