WOLF Ex-PENLITE PL-01mega-ex.com/product_hazardous/Electrical Equipment/Wolf...temperature class, in zone 1 & 2 (category 2) hazardous areas. The Wolf Ex-Penlite has a brass body with

Uniform illumination for close

proximity work

Pen-size pocket portability

High quality robust brass

construction

Explosion-protected to new

ATEX directive

High energy alkaline cells

Certified

Single handed switch operation

WOLF Ex-PENLITE PL-01

ATEX

94/9/EC Directive

Compliant

Ex-Penlite PL-010.56w wide angle beam (approx 30°)Peak luminous intensity at 1m 9 lux, at 2.5m 2 lux

146mm

11mm

1180

WOLF SAFETY LAMP COMPANYSaxon Road Works, Sheffield S8 0YA, EnglandTel: +44 114 255 1051 Fax: +44 114 255 7988E-mail: [email protected] Website: www.wolf-safety.co.ukMMD/N/.4.03/6K

Wolf Safety Lamp Company

The Wolf Ex-Penlite PL-01 is a

small, robust light source, certified

for safe use in potentially explosive

atmospheres. It is ideal for use in

many hazardous area applications,

such as gas meter reading, and by

systems and instrument engineers

as an essential and convenient

mini-torch for close inspection and

maintenance work. It can also be

provided as an escape light for

personnel in confined spaces if

faced with an emergency situation.

Approved by German test house

TÜV, the Wolf Ex-Penlite is CE

marked in compliance with the

94/9/EC Explosive Atmospheres

(ATEX) Directive for use in a wide

range of potentially explosive

atmospheres. The Wolf Ex-Penlite

has been approved to Apparatus

group IIC, allowing use in all

potentially explosive gases,

vapours and mists, up to T4

temperature class, in zone 1 & 2

(category 2) hazardous areas.

The Wolf Ex-Penlite has a brass

body with satin plated finish, and a

threaded lens cap with plastic lens,

removable for bulb and battery

replacement. A push button switch

is fitted on the end for easy, single

handed, operation. A pen clip is

also incorporated in the design,

allowing the Ex-Penlite to be

securely retained in a pocket, and

preventing roll on a flat surface.

Electro-static hazards are avoided

with the use of a metal body.

Utilising a 2.25V, 0.25A lensed

bulb, the Wolf Ex-Penlite emits

an excellent uniform, wide angled

beam, ideally suited to short

distance work. Approvals allow the

use of all R03 (AAA) standard and

specified LR03 high power alkaline

cells; alkaline cells providing a

continuous duration of up to five

hours. Use of rechargeable cells

is prohibited.

The Wolf Ex-Penlite is supplied

complete with cells, an EC

Declaration of Conformity and

user instructions. A copy of the

Wolf Ex-Penlite EC Type

Examination Certificate is

available upon request.

Wolf Ex-Penlite PL-01Technical Specification

Product reference PL-01Product description Safety penlite, primary cell powered

Code II 2 G EEx e ia IIC T4

Apparatus standards EN 50014, EN 50019, EN 50020

Equipment category 2G

Type of protection ‘e’ increased safety, ‘ia’ intrinsic safety

Apparatus classification zones 1 & 2 , gas groups IIA, IIB and IIC

Temp. classification T4

Ambient temperature -20°C to +40°C

Certification TÜV00ATEX1529

Enclosure brass, plated

Lens plastic

Beam type wide angle

Light source: Wolf Pt. no. PL-11Type Vacuum filament bulb, lensed, Type 222

Volts 2.25V

Watts (amps) 0.56W (0.25A)

Output 5 lm

Life 5 hrs

Power source: Wolf Pt. no. LT-401 x 2Type AAA primary cells (LR03 recommended)

Volts 2 x 1.5v

Light duration 5 hrs

Ingress Protection IP54 minimum

Weight (incl. cells) 60 g

Note: All information has been gathered under laboratory conditions, the user must regard thevalues given as approximate. The Company reserves the right to alter product specifications withoutprior notice.

Model MicroLite M-10 MiniLite M-20 MiniLite M-40 MiniLite M-60

Description LED Micro Torch Xenon Mini Torch LED Mini Torch 1 watt LED Mini Torch

Code II 1 G

Ex ia IIC T5 (Tamb=50oC)

II 2 G Ex ib IIC T4

II 1 G Ex ia IIC T4

(Tamb=50oC)

II 1 G Ex ia IIC T4

Equipment Category 1 G 2 G 1 G 1 G

Apparatus Standard EN50020, EN60079-0

Type of Protection Intrinsic Safety Area of Classification (gas) Zones 0, 1 & 2 Zones 1 & 2 Zones 0, 1 & 2 Zones 0, 1 & 2

Temperature Class (gas) T5 T4

Ambient Temperature -200C to + 500C -200C to + 400C -200C to + 500C -200C to + 400C

Certificate Baseefa06ATEX0084

Enclosure Impact resistant thermoplastic, electrostatic non-hazardous

Lens Polycarbonate

Beam Type Medium Spot Narrow Spot Medium Spot Medium Spot

Part No. - M-201 - -

Type 1x5mm LED White Xenon filled filament bulb 3 x 5mm LED White 1 x 1Watt LED

White Rating - 2.3V 0.3A - 1 Watt

Output 18 cd 15 lumens 3 x 18 cd 30 lumens

Light Source

Life 50,000 hours 30 hours 50,000 hours 50,000 hours

Part No. 4 x M-102 2 x M-202 3 x M-402 3 x M-402

Type LR44 primary cells to IEC60086

LR03 primary cells to IEC60086



Power Supply

Volts 4 x 1.5V 2 x 1.5V 3 x 1.5V 3 x 1.5V

Light Duration 2 hours 2.3 hours 10 hours 10 hours

Ingress Protection IP67 to EN60529:1992

Weight (including cells) 25gms 60gms 60gms 60gms

T6 and T4 models

Simple, robust design

Ultimate halogen light

output

High energy alkaline cell

certified

ATEX explosive gas and

dust approval

Low power indicator option

0.45m

5m

WOLF ATEX SAFETY TORCHES

1180

200mm

60mm 80mm

195mm

TS-26 & TR-261.2W beam (approx 5°)Peak luminous intensity at 5m, 170 lux

TS-24 & TR-241.7W beam (approx 5°)Peak luminous intensity at 5m, 230 lux

TS-24+ & TR-24+2.0W beam (approx 5°)Peak luminous intensity at 5m, 280 lux

The Wolf ATEX Safety Torch rangeoffers the perfect answer for everyEx application, with reliable, simpleand cost effective solutions. Therange includes T4 and T6 modelswith straight or right-angle bodystyle.

T4 models give outstanding lightoutput using advanced, long lifehalogen or xenon bulbs, set in a high quality parabolic reflector,coupled with alkaline cell approval,giving up to 12 hours of light output.The T4 halogen models are fittedwith a low power warning circuit,illuminating a red indicator whenbattery voltage is low. AlternativelyT6 approval allows use in any Zone1 or 2 atmospheres, with optimumlight output in this temperatureclass, and a 5 hour duration.

The Wolf ATEX Torch range is CEmarked compliant with the 94/9/ECATEX Explosive AtmospheresEquipment Directive. BASEEFACertification is to the lateststandards, for use in potentiallyexplosive gas, vapour and mistatmospheres, zones 1 and 2,temperature class T6 or T4. Dustignition protection covers use inzones 21 and 22, with the certifiedmaximum surface temperatures of65°C or 95°C. Temperature ambientuse is from – 20°C to a maximum of 40°C or 55°C, as specified in the instructions.

The compact Wolf ATEX Torchdesign has a high-grip ergonomicform with easy single handedswitching, even with gloved hands.The torch body offers high strength,

and proven impact resistance evenat sub zero temperatures, usingcarefully selected thermoplasticresins with excellent chemicalresistance. Additionally, the rubberarmoured lens ring and end cap giveenhanced grip and shock protection.The shatterproof polycarbonate lenshas a scratch and chemical resistantcoating. The Wolf ATEX Torch rangeis sealed dust tight and protectedfrom water immersion, with acertified IP67 enclosure. Right anglemodels incorporate a replaceablehigh strength thermoplastic belt clipfor hands free use. Both modelsallow straightforward battery andbulb replacement, a spare bulb isfitted in the bulbholder for quick and convenient replacement. Allmodels are supplied with wriststraps and clip rings.

Wolf ATEX Safety TorchesTechnical Specification

Model TS-26 TR-26 TS-24 TR-24 TS-24+ TR-24+Description Safety Torch, Primary Cell Powered, Straight or Right-Angle

Straight T6 R/Angle T6 Straight T4 R/Angle T4 Straight T4+ R/Angle T4+with indicator with indicator

Code II 2 GD EEx e ib IIC T6 II 2 GD EEx e ib IIC T4 (Tamb = 40/55°C)IP67 T65°C IP67 T95°C (Tamb = 55°C)

Equipment category 2 GDApparatus standard EN50014, EN0019, EN50020, EN50281-1-1Type of protection Increased safety, intrinsic safetyArea of classification (gas) Zones 1 & 2 Gas Groups IIA, IIB, IICTemperature class (gas) T6 T4Ambient temperature (gas) -20°C to +40°C -20°C to +40°C/+55°CArea of classification (dust) Zones 21 and 22Temperature class (dust) 65°C 95°CAmbient temperature (dust) -20°C to +40°C -20°C to +55°CCertificate BAS 02 ATEX 2220XEnclosure Impact resistant thermoplastic, electrostatic non-hazardousLens Polycarbonate, impact resistant with hard coatBeam type Medium spot Light source: Pt. no. TP-406 TP-404 TP-402

Type Vacuum filament bulb Xenon filled filament bulb Halogen filled filament bulbRating 2.4V, 0.5A 2.4V, 0.7A 2.4V, 0.83AOutput 11.4 lm (at nom voltage) 15 lm (at nom voltage) 23 lm (at nom voltage)Life 15 hrs 50 hrs 30 hrsSpare bulb TP-406 TP-404 TP-404

Power supply Pt. no. T-20 H-20Type R20 primary cells to IEC60086 R20/LR20 primary cells to IEC60086Volts 2 x 1.5v 2 x 1.5v

Light duration Up to 5 hrs Up to 12 hrs Up to 10 hrsIngress protection IP67 to EN60529: 1992Weight (without cells) 150g 190g 150g 190g 150g 190g



Note: All information has been gathered under laboratory conditions, the user must regard the values given as approximate. The Company reserves the right to alter product specifications without prior notice.

Unique Variable Beam

Adjustment

Modular Construction for

Flexible Options

Twin Concept Ex. Enclosure

Self Re-locking Bulb

Enclosure

0.5A High Efficiency

Krypton or Xenon Bulb

Moulded in High Impact

Thermoplastic Resin

Right angle models with

clip available for

‘hands-free’ operation

CE marked to ATEX

Directive

WOLF INTRINSICALLY SAFE TORCH

2.2m

0.4m

5m

T-2DC & T-2DCRA1.2w variable beamPeak luminous intensity for spot beam (approx 4.5°) at 5m 200luxPeak luminous intensity for wide beam (approx 25°) at 5m 30lux

T-3DC & T-3DCRA1.8w variable beamPeak luminous intensity for spot beam (approx 4.50) at 5m 300luxPeak luminous intensity for wide beam (approx 250) at 5m 40lux

65

250205190

75

265

65 75

1180

The Wolf Intrinsically Safe Torchrange comprises four modelsdesigned to meet a wide scope of requirements. The robustlyconstructed torches are moulded in high impact thermoplastic resinfor lasting durability and servicerequirements. Compact and simpleto use, the torches are designed for use in potentially explosiveatmospheres, emergency situationsor wherever the need arises for a handheld safety torch.

The range complies with the94/9/EC ATEX Directive asCategory 2 equipment, and isapproved to the latest European“EN” Standards for “Electricalapparatus for potentially explosiveatmospheres”. This allows for use in Group II applications, Zones 1and 2, IIA and IIB gases where T4 temperature class permits.

Common uses are in Fire-fightingas Breathing Apparatus (BA)torches, Gas distribution, Watertreatment, and wherever explosivegases and vapours accumulate in confined spaces.

A unique and highly acclaimedfeature of the torches is the OpticalFocusing System. The parabolicmirror is computer designed toprovide variable beam adjustmentfrom a powerful spot to broaderfloodlit illumination, through the high impact lens.

The torches are available as two cellstraight head (T-2DC), two cell right

angle head (T-2DCRA), three cellstraight head (T-3DC) and three cell right angle head (T-3DCRA).

The 0.5A bulbs used (2.4v in twocell, 3.6v in three cell models) arehigh efficiency bulbs giving a highlevel of light output.

The Ex. construction is also unique,incorporating two separateexplosion protected enclosures; a lockable ‘Increased Safety’enclosure containing the internal

rotating switch and bulb, and an‘Intrinsically Safe’ enclosure for the primary cells.

Each torch comes complete with a lock release pin, wrist lanyard and maintenance instructions.Certification is for any Zinc R20 size type primary cell.

Alkaline Manganese Cells of anydescription may not be used inthis product.


Wolf Intrinsically Safe Primary Cell TorchTechnical Specification

Product reference T-2DC T-2DCRA T-3DC T-3DCRAProduct description 2 cell 2 cell 3 cell 3 cell

safety torch safety torch safety torch safety torchstraight head r/angle head straight head r/angle head

Code II 2G EEx e ib IIB T4Apparatus standard EN50014, EN50019, EN50020Type of protection “e” increased safety, “ib” intrinsic safetyArea of class (gas) Zones 1 and 2, gas groups IIA and IIBTemp. class (gas) T4Ambient temperature -20°C to +40°CCertificate Baseefa02ATEX0181Enclosure High impact thermoplastic resinLens PolycarbonateBeam type VariableLight source: Pt. no. T-203 T-303

Type Krypton/Xenon filled filament bulbVolts 2.4V 3.6VWatts 1.2W 1.8WOutput 12 lm 25 lmLife 10 hrs 20 hrs

Power source: Pt. no. 2 x T-20 3 x T-20Type R20 D size zinc primary cells only

Light duration up to 5 hoursIngress protection IP 66 to EN60529:1992Weight (excl. cells) 200g 225g 215g 240g

WOLF SAFETY LAMP COMPANYSaxon Road Works, Sheffield S8 0YA, EnglandTel: +44 114 255 1051 Fax: +44 114 255 7988E-mail: [email protected] Website: www.wolf-safety.co.ukMMD/N/4K/2.03


ATEX approved for explosive

gas and dust atmospheres

High power LED or Halogen

bulb versions for outstanding

light output

Compact and lightweight

ergonomic torch design

Two levels of light output give

up to six hours duration

Battery state-of-charge indicator

Utilises latest battery

technology, eliminates

‘memory’ affect

Very low maintenance, quick

and easy parts replacement

Mains and vehicle quick

charge options.

WOLF RECHARGEABLE TORCH

60mm

80mm

195mm

R-304W beam (approx 6°)Peak luminous intensity at 5m, 340lux

R-503W LED beam (approx 6°)Peak luminous intensity at 5m, 360lux

ATEX

94/9/EC Directive

Compliant

PROVI

SIONAL

1180

WOLF SAFETY LAMP COMPANYSaxon Road Works, Sheffield S8 0YA, EnglandTel: +44 114 255 1051 Fax: +44 114 255 7988E-mail: [email protected] Website: www.wolf-safety.co.ukSL007 issue 01

MMD/PC/04.05/3K



Wolf Rechargeable TorchTechnical Specification

Product reference R-30 R-50Product description Rechargeable safety torch, right-angle

Halogen light source LED light sourceCode II 2GD EEx e ib IIC T4 IP67 T135°C II 2GD EEx ib IIC T4 IP67 T135°CEquipment category 2 GDApparatus standards EN50014, EN50019, EN50020, EN50281-1-1Type of protection “e” increased safety, “ib” intrinsic safetyArea of classification (Gases) Zone 1 and 2, Gas groups IIA, IIB and IICTemp. classification (Gases) T4Area of classification (Dust) Zones 21 and 22Max surface temp. (Dusts) T135°CAmbient temperature -20°C to +40°CCertificate Baseefa05ATEX0068 Baseefa05ATEX0069Enclosure Impact resistant thermoplastic, electrostatic non-hazardousLens Polycarbonate, impact resistant with hardcoatBeam type Medium SpotLight source: Pt. no. R-451 Non replaceable

Type Halogen filled filament bulb High power LEDVolts 6.0V n/aWatts 4W 3WOutput 54 lm 65 lmLife 300 hours 25000 hours

Power source: Pt. no. R-271Type Rechargeable battery, Lithium-IonVolts 7.4VCapacity 2.2AhLife Up to 500 recharge cycles

Light duration high/low 3.5/6.5 hrs 3.0/5.5 hrsIngress protection IP67 to EN60529: 1992Weight (incl. cells) 0.325 kg 0.375 kgCompatible charger RC-200 12-24Vdc (e11 compliant)

RC-200 + RC-300 110/230VacRecharge time 2.5 hrs

The high-tech ATEX approved Wolf Rechargeable Torch rangeuses the latest technology to giveexcellent performance, robustnessand reliability in the most extremeconditions.

The Wolf Rechargeable Torch is CE marked to the ATEX Directive,allowing use in zones 1 and 2potentially explosive gas, vapour,mist and dust atmospheres, where a T4 temperature class permits.

The compact and lightweight WolfRechargeable Torch design has a high-grip ergonomic form with easy single handed switching, even with gloved hands. The highstrength torch body has provenimpact resistance even at sub zero temperatures. The rubberarmoured lens ring and end capgive enhanced grip and shock

protection. The shatterproof polycarbonate lens has a scratchand chemical resistant coating. Theenclosure is sealed dust tight andprotected from water immersion,with a certified IP67 enclosure. The right-angle body arrangementincorporates a replaceable highstrength thermoplastic belt clip for hands free use.

Unique optics deliver a piercingbeam with outstanding light outputfrom the high power LED or thehalogen bulb versions. Duration is over 3 hours; selecting lowpower doubles this duration. Stateof battery charge is indicated witha bar of high intensity red LEDs,which go out as battery chargediminishes. Towards the end ofdischarge, the beam flashes offrepeatedly, warning recharging is required. Use of the latest

lithium-ion battery technologyimproves reliability and eliminates‘memory’ affect.

The RC-200 Charger is configuredas a torch holder, and will ‘quick’charge a torch in 2.5 hours. Amajor feature is the single-handed,‘snap-in/snatch-out’ function, forquick release but secure retention,even with vehicle vibration. Thecharger is powered from vehiclevoltages, but can run from mainsvoltage when used with the RC-300 mains power supply.

Very low maintenance and quickcomponent replacement are keybenefits of this product range. The LED light source is expected to last the product lifetime; the bulbis long life, a spare is supplied inthe torch. All models are suppliedwith wrist straps and clip rings.

CE marked to ATEX Directive

Explosive gas, vapour and mist

certified for zones 1 & 2, up to

T4 temperature class

Dust ignition protected for

zones 21 and 22, for dusts

with ignition temperatures

over 135°C

Increased light output from

halogen bulb

Alkaline cell approval giving

20 hour duration

Robust anti-static

thermoplastic lamp enclosure

Ingress protection to IP66

Lloyd’s Register Type Approved

Supplied with detachable

shoulder strap

WOLFLITE HANDLAMP H-4DCA

Wolflite H-4DCA 2.4w spot beam (approx 3.5°)Peak luminous intensity at 5m 960lux

0.18m

5m

185130

140

ATEX

94/9/EC Directive

Compliant

1180

The Wolflite H-4DCA primary cellpowered safety handlamp is one of the latest versions of the highlysuccessful, industry standard rangeof Wolflite Ex handlamps, from The Wolf Safety Lamp Company.

Approved by BASEEFA, the WolfliteH-4DCA has been ‘CE’ marked in compliance with the 94/9/EC‘Explosive Atmospheres’ (ATEX)Directive, for use in a wide range of potentially explosive gases,vapours, mists and dusts.Conformance to the ATEX directivewill reassure the user that the H-4DCA handlamp has beendesigned and approved to the verylatest editions and interpretations ofthe relevant European standards,that it complies with all ‘essentialsafety requirements’, and has been designed with due regard to state-of-the-art technology. ATEX Directive Approval alsoensures continuity of supply beyond the year 2003.

Additionally the H-4DCA handlamphas both a Lloyd’s and an MCA type approval for use in explosiveatmospheres in marine applications.

The lamp is constructed from anew, exceptionally robust andhighly durable thermoplasticmaterial, well able to withstand the effects of heavy industrial use. In addition to this, the material isanti-static, preventing the build upof potentially dangerous electro-static charges. A 6mm thick,toughened, scratch resistant glasslens with rubber seal, together witha second seal fitted at the lens ringand lamp body joint, ensure that

the lamp is protected from ingressof dusts and liquids and cantherefore be used in the dustiestand wettest conditions possible.

The outstanding light output fromthis relatively small and compacthandlamp is achieved with the useof a high output, high efficiencyhalogen bulb, rated at 4.8V 0.5A,focused within a 100mm diameterparabolic reflector. This provides theuser with an extremely well definedbeam of intense white colour.

The H-4DCA handlamp has beenapproved for use with alkalinemanganese, zinc chloride or zinccarbon primary cells. The use ofalkaline manganese cells isrecommended because of theirsignificantly greater capacity,delivering a brighter white light forup to 20 hours duration from oneset of cells; by comparison, nearlyfour times the duration of zinc Dcells. The H-4DCA is suppliedcomplete with a convenientremovable shoulder strap.

WOLF SAFETY LAMP COMPANYSaxon Road Works, Sheffield S8 0YA, EnglandTel: +44 114 255 1051 Fax: +44 114 255 7988E-mail: [email protected] Website: www.wolf-safety.co.ukMMD/N/4.03/4.5K

Note: All information has been gathered under laboratory conditions, the user must regard thevalues given as approximate. The Company reserves the right to alter product specifications without prior notice.

Wolf Safety HandlampTechnical Specification

Product reference H-4DCAProduct description Safety handlamp, primary cell poweredCode II 2 GD EEx e ib IIC T4 IP66 T135°CEquipment category 2 GDApparatus standards EN50014, EN50019, EN50020, EN50281-1-1Type of protection “e” increased safety, “ib” intrinsic safetyArea of classification (gases) Zones 1 and 2, Gas Groups IIA, IIB and IICTemp. classification (gases) T4Area of classification (dusts) Zones 21 and 22Max. surface temp. (dusts) 135°CAmbient temperature -20°C to +40°CCertificate BAS00ATEX2203Enclosure Impact resistant thermoplastic,

electrostatic non-hazardousLens Toughened glass (6mm)Beam type SpotLight source: Pt. no. H-141 only

Type Halogen filled filament bulbVolts 4.8VWatts (Amps) 2.4W (0.5A)Output 37 lm (at nominal voltage)Life 20 hrs (at nominal voltage)

Power source: Pt. no. 4 x H-20 (LR20)Type LR20/R20 primary cells, to IEC 60086Volts 4 x 1.5V

Light duration Up to 20 hoursIngress protection IP66 to EN60529 : 1992Weight (incl. cells) 1.45kg



Explosive gas, vapour and

mist certified for zones 1 & 2,

up to T4 temperature class

Dust ignition protected for

zones 21 and 22, for dusts

with ignition temperatures

over 135°C

Electronic current limited

battery with power fail

operation and deep

discharge protection

Enhanced light output from

halogen bulb

Robust anti-static

thermoplastic lamp enclosure

Ingress Protection to IP66

For use with Wolf C-251HV/LV

chargers

Lloyd’s Register Type

Approved

Supplied with detachable

shoulder strap

WOLFLITE HANDLAMP H-251A

0.35m

5m

Wolflite H-251A2.8w spot beam (approx 4°) Peak luminous intensity at 5m 700lux

130

140

185

ATEX

94/9/EC Directive

Compliant

1180

The H-251A Wolflite is ideal for use as a general purpose safety lamp forinspection and work tasks in explosiveatmospheres. Rechargeable batteryoperation offers a convenient andcost-effective solution for Exapplications where a handlamp isfrequently required for long periods.

CE marking of the H-251A Wolfliteis in compliance with the 94/9/EC‘Explosive Atmospheres’ (ATEX)Directive and the EMC Directive.BASEEFA approval is to the verylatest European ‘EN’ standards for use in potentially explosiveatmospheres. The H-251A alsohas both a Lloyd’s and an MCAType Approval for use in potentiallyexplosive atmospheres in marineapplications.

The H-251A Wolflite Handlampoffers the same extreme robustnessand reliability for use in harshenvironments found with all WolfliteHandlamps. The scratch and impactresistant lens is made from 6mmtoughened glass. The handlampbody and lens ring is moulded in ahighly resilient thermoplastic materialable to withstand the drop andimpact expected from heavyindustrial use, even at sub-zerotemperatures. Additionally thematerial is electrostatic non-hazardous, ensuring there is no risk of a dangerous build up of static charges. The lamp enclosureis sealed to IP66, preventing theingress of dust and sealing against water in all conditions except submersion.

The outstanding light output isachieved with the use of a highoutput, high efficiency long life halogen bulb, focused within a 100mm diameter parabolicreflector giving the user anextremely well defined beam of intense white light.

The battery pack, rechargedinternally within the H-251AHandlamp, uses the same highlyreliable sealed lead acid system as all rechargeable WolfliteHandlamps, but is enhanced withelectronic protection and controls.The battery is rendered intrinsicallysafe by the use of a fast switchingshort-circuit protection circuit. A low voltage cut-off featureautomatically switches the lamp offwhen all useful battery capacity hasbeen used, protecting the battery

from damage through deepdischarge. Power-failure modeallows the handlamp to be used as an escape light, automaticallyilluminating if power to the charger is interrupted.

The H-251A is recharged in thestandard Wolflite Lamp chargers,the C-251HV mains charger andthe C-251LV vehicle charger.

The H-251A is supplied with aconvenient removable shoulder strap.


MMD/WK/10.04/3K



Wolf Safety HandlampTechnical Specification

Product reference H-251AProduct description Rechargeable safety handlamp

Code II 2 GD EEx e ib IIC T4 IP66 T135°C

Equipment category 2 GD

Apparatus standards EN50014, EN50019, EN50020, EN50281-1-1

Type of protection “e” increased safety, “ib” intrinsic safety

Area of classification (Gases) Zones 1 and 2, Gas Groups IIA, IIB and IIC

Temp. classification (Gases) T4

Area of classification (Dusts) Zones 21 and 22

Max. surface temp. (Dusts) 135°C


Certificate BAS00ATEX2176

Enclosure Impact resistant thermoplastic,

electrostatic non-hazardous

Lens Toughened glass (6mm)

Beam type Spot

Light source: Pt. no. H-69Type Halogen filled filament bulb

Volts 3.75V

Watts 2.8W

Output 39 lm (at 3.75V)

Life 100 hrs

Power source: Pt. no. H-66Type Rechargeable battery, sealed lead acid

Volts 4V

Capacity 5Ah

Life Up to 500 recharge cycles

Light duration Up to 7 hours

Ingress protection IP66 to EN60529 : 1992

Weight (incl. cells) 1.75kg

Compatible charger C-251 HV or C-251 LV

0.35m

5m

130 185

140

Wolflite H-2513.6w spot beam (approx 3°)Peak luminous intensity at 5m 900lux

Market Leading Rechargeable

Handlamp

Long-life, high output

Krypton Bulb

Design Council Awarded

Sealed Lead Acid Reliability

User and Maintenance Friendly

Reliable Efficient Chargers

Lloyd’s Register Type Approved

WOLFLITE HANDLAMP H-251 Mk1/Mk2

The Wolflite H-251 is arechargeable Handlamp approvedto European and BASEEFAstandards and suitable for use inhazardous zones 1 and 2. Since its launch in 1980 the Wolflite hasfound a place as the market leaderin hazardous area portable lightingequipment. Applications include the Petrochemical and Offshoreindustries, Fire-fighting, Gas and Water distribution, in shortwherever a potentially explosiveatmosphere may occur.

The Wolflite is constructed in ahighly durable polymer, designed to withstand the effects of heavyindustrial use. The glass lens isscratch and scuff resistant and willnot discolour when in contact withchemicals. The entire product hasbeen ‘drop’ tested for damage and both the outer and innercomponents proved equally highly resilient.

Many unique design features are incorporated in the H-251Handlamp, including; an interlockmechanism preventing internalaccess when the lamp is in use,short circuit protection via aceramic fuse and a magneticallyoperated, hermetically sealed Reed Switch to avoid open internal sparking.

The rechargeable battery pack ismade up of two sealed lead acidcells assembled into a robustcasing. This battery pack has a recharge/discharge life ofapproximately 500 cycles.

Available in two versions, the H-251Mk1 has a removable battery pack

and remote battery charging unit sothat, if the user has two or morebattery packs, the lamp can alwaysbe available for use. The H-251Mk2 has charging contacts on thebase of the lamp to enable batterycharging ‘in situ’ using the lampcharger. The H-251 Mk2 Lampchargers are available for mains(120/230v) input or low voltage (12-32v) input for use in vehicles. All chargers have Light EmittingDiodes which indicate state ofcharge, a rating plate on the chargerexplains the sequence of this.

The Wolflite H-251 Handlampsconform with the DOT Class I‘Safety Lamp’ specification,Regulation 17 of the SOLASprotocol and have been issued with a Lloyds Register of ShippingType Approval Certificate.

The Wolflite H-251 is suppliedcomplete with battery pack, lockkey and shoulder lanyard, togetherwith maintenance instructionsgiving comprehensive details ofspares available and guidance for installation.

WOLF SAFETY LAMP COMPANYSaxon Road Works, Sheffield S8 0YA, EnglandTel: +44 114 255 1051 Fax: +44 114 255 7988E-mail: [email protected] Website: www.wolf-safety.co.ukMMD/N/12.03/2K



Wolflite H-251 Safety HandlampsTechnical Specification

Product reference H-251 Mk1 H-251 Mk2Product description Rechargeable safety Rechargeable safety

handlamp, battery handlamp, batterycharged externally charged internally

Code EEx e s II T3

Apparatus standard EN50 014, EN50 019, SFA 3009:1972

Type of protection “e” increased safety, “s” special protection

Area of classification Zones 1 and 2, gas groups IIA, IIB and IIC



Certification BASEEFA Certificate No. Ex 81142

Enclosure High impact polymer

Lens Toughened glass (6mm)

Beam type SpotLight source: Pt. no. H-26

Type Krypton filled filament bulbVolts 3.6vWatts 3.6wOutput 80 lm (at 4.1v)Life 100hrs

Power source: Pt. no. H-16EType Rechargeable battery, sealed lead acidVolts 4vCapacity 5AhLife up to 500 recharge cycles

Light duration 4-5 hours

Ingress protection IP 66 IP 54

Weight 1.5kg

Compatible charger C-251 C-251 HV or C-251 LV

Certified to ATEX Directive

IECEx Scheme Certified


certified for zones 0,1 & 2

Up to T4 temperature class

Seven ‘Everlasting’ High intensity

LEDs

Push button switchable three,

five or seven LEDs

Long 50 hour duration at full

brightness

Robust anti-static thermoplastic

enclosure

Fitted with fabric head band

Supplied with Rubber helmet band

for hard hat use

WOLF ‘ZONE 0’ HEADTORCH HT-200

1180

Wolf ‘Zone 0’ Headtorch HT-200Seven high output LEDs (approx 28°)Peak luminous intensity at 1m 114 lux, at 2.5m 19 lux

2.5m

1m

1m 2.6m

86mm

112mm

49mm

34mm

94mm

ATEX

94/9/EC Directive

Compliant


MMD/PC/04.05/3K



Wolf ‘Zone 0’ HeadtorchTechnical Specification

Product reference HT-200Product description Safety headtorch, primary cell poweredCode II 1 G EEx ia IIC T4/T3

Ex ia IIC T4/T3Apparatus standards EN50014, EN50020,

IEC60079-0, IEC60079-11Type of protection “ia” intrinsic safetyArea of classification (Gases) Zones 0, 1 and 2, Gas groups IIA, IIB, IICTemp. classification (Gases) T4/T3Ambient temperature -20°C to +40°CCertificate Baseefa04 ATEX0398

IEC Ex Bas 04.0053Enclosure Thermoplastic, anti-staticLens Antistatic coated polycarbonateBeam type Wide angleLight source: Type Seven white high intensity LEDs

Life 100,000 hours (typical)Power source: Pt. no. 3 x HT-210 (LR6)

Type LR6/R6 primary cells, to IEC 60086 (T4/T3 see instructions)Volts 3 x 1.5v

Light duration Up to 240 hours (50 hours at full brightness)Ingress protection IP54

Weight (incl. cells) 215g

The Wolf ‘Zone 0’ Headtorch HT-200 is a primary cell poweredhead lamp with LED light source. It is ATEX approved for safe use in Zone 0 Hazardous Areas and isideal for applications where handsfree lighting is essential, particularlywhere access is difficult, requiringclimbing or crawling.

The HT-200 Headtorch has beenCertified by Baseefa for use inexplosive atmospheres. It is CEmarked in compliance with the94/9/EC (ATEX Equipment)Directive, for use in shore-basedhazardous area activities within the EU. In addition it has an IECExScheme certificate for use in othercountries throughout the world.The approval code allows theHeadtorch to be used in zones 0, 1 & 2 hazardous areas, in all groupII (industrial) gas apparatus groups,for potentially explosive gases,vapours and mists up to T4 or T3

temperature class, dependant oncell type used.

The Wolf ‘Zone 0’ Headtorch has a compact, lightweight design and is constructed from a robustand highly durable thermoplasticmaterial, which is inherently anti-static, minimising the risk of ignitionfrom static charges. The lens istreated with a scratch resistantanti-static coating and the lensmodule is fitted with a rubbershroud, protecting the product fromimpact damage, ensuring suitabilityin industrial applications. The HT-200 has a metal locking clasp,securing the headtorch batteryenclosure to prevent accidentalopening in the hazardous area, but designed for quick removalallowing easy cell replacement.

Seven high intensity, everlasting,white LEDs give 50 hours durationat full brightness from one set of

three AA alkaline primary cells (upto 240 hours with reduced output).The use of primary cells makes the product a more economicalsolution for personal lightingrequirements in many applicationsarising in Hazardous Area confinedspaces. Three switching levels,selected using the push buttonintegral to the rubber shroud,ensure a wide range of options for duration and brightness. The lamp head can be pivoted,allowing for easy control of thelight output direction up or down.

The HT-200 is designed to give theuser effective hands free lighting. It is supplied fitted with a fabrichead band and padded lampbacking, allowing the headtorch to be comfortably worn directly on the head for extended periods.Alternatively, a rubber head bandis supplied and can be fitted foreffective use on hardhats.

Completely hands free

For head or hardhat use

Pivoting head unit for accurate

beam positioning

Selectable LED or incandescent

light source



certified for zones 1 & 2

Rechargeable, supplied with

“quick” battery charger

Robust, ergonomic design

Up to 7 hour battery duration

when using bulb

DUO ATEX HEADLAMP

0035

ATEX Duo HT-012W variable beam Peak luminous intensity for spot beam (approx 4.5º) at 5m, 31luxPeak luminous intensity for wide beam (approx 13.5º) at 5m, 14lux0.5w LED BEAMPeak luminous intensity (approx 27º) at 2.5m, 6.5lux

ATEX

94/9/EC Directive

Compliant

Quick

Cha

rge

Long

Dur

atio

n

The Duo ATEX is a rechargeableheadband lamp approved for safeuse in potentially explosive gas,vapour and mist atmospheres. It is the ideal lighting solution forworkers in confined spaces andhazardous areas, needing a ‘handsfree’ lamp, which will direct abeam of light wherever they look.

CE marking in compliance with the94/9/EC explosive atmospheres‘ATEX’ Directive confirms that theDuo ATEX is compliant with thelatest European legislation, and is safe for use in zone 1 and 2hazardous areas, where the T3 temperature class permits.

The Duo ATEX comprises of ahead unit and a battery box joinedby a cable, and mounted on an

elastic headband. Both head unitand battery box are sealed ‘waterresistant’ and are constructed from high quality impact resistantplastic materials. The lens isshatterproof polycarbonate. The headband is adjustable, for use on a head or a hardhat. Helmet clips are available for hardhatuse, as additional items, to securethe elasticated straps in place.

The Duo ATEX incorporates twolight sources, selected using anexternally mounted switch withlock feature to prevent accidentalswitching. The 2 watt filament bulbhas a ‘zoom’ function, allowingbeam adjustment from narrow spot to wide angle flood and gives a duration of up to 7 hours.

Alternatively, the bright, white LEDlight source offers energy efficientclose-up illumination for up to 24hours. The LEDs will run for up to160 hours, but at a reduced lightoutput. The head unit will pivot up or down for accurate beampositioning. A spare bulb issupplied, fitted inside the head unit.

The rechargeable battery pack is short-circuit protected tointrinsically safe levels and is safeto be removed and replaced in thehazardous area. The Duo ATEX is supplied with a mains “quick”charger, fully charging a completelydischarged battery pack in 4 hours.Alternatively a vehicle charger isavailable to charge the battery from a 12v vehicle supply.


MMD/WK/10.04/3K



Duo ATEX HeadlampTechnical Specification

Product reference HT-01Product description Rechargeable safety headband lamp E61L5UK Code II 2 G EEx e ia IIC T3Equipment category 2 GApparatus standards EN50014, EN50019, EN50020Type of protection “e” increased safety, “ib” intrinsic safetyArea of classification (Gases) Zone 1 and 2, Gas groups IIA, IIB, IICTemp. classification (Gases) T3Ambient temperature -5°C to +40°CCertificate INERIS02ATEX0056Enclosure High impact thermoplasticLens PolycarbonateBeam type Switchable from variable bulb to fixed LEDLight source: Pt. no. HT-02 HT-06

Type Main vacuum bulb 5 x White LEDVolts 6V 6VWatts 2W 0.5W

Power source: Pt. no. HT-08Type Ni MHVolts 4.8VCapacity 2.7AhLife 500 cycles

Light duration Up to 7 hrs Up to 24 hrsIngress protection IP54Weight (incl. battery) 0.325 kgCharger reference Supplied with HT-01 HT-20Product description E65200 2UK, E65300,

230V Mains charger 12V Vehicle chargerInsulation class II IIIEnclosure Plastic PlasticInput voltage 230V 12VRecharge time 4 hrs 14 hrsIngress protection IP20 IP20

• ATEX approval for use in zones1 & 2 explosive atmospheres

• Uses standard 60 watt GLSrough service ES lamps

• Robust construction withrubber handle and impact ring

• Toughened glass cover withsteel cage

• Cast iron locking ring

• Convenient integral hanging hook

• Ingress protection to IP54

• Can be supplied, fitted with cable

WOLF Ex GLS LEADLAMP

330

145

The Wolf Ex GLS Leadlamp is acost effective explosionproof lampfor use in many hazardous areaapplications. It is ideal for localisedinspection and maintenanceoperations over extended periods.

The Ex GLS Leadlamp is ATEXcompliant and approved for use inzones 1 and 2 hazardous areas,for IIA gases where a T3temperature class permits. This gives the lamp the versatility of use in many potentially explosiveatmospheres including methane,petroleum and propane.

The lamp for the Ex GLS Leadlampis a standard 230V 60W GLSrough service ES. This gives a good ambient light, ideal for plantinspection and maintenance duties.

The Ex GLS Leadlamp light sourceis protected by a toughened glassdome, which is able to withstandchanges in temperature, preventingthe risk of failure from thermalshock. A steel cage guard with castiron locking ring minimises the riskof direct impact damage, furtherprotecting the glass. The guard and ring are plated to prevent

corrosion. Finally, the resilientrubber construction incorporatestwo rubber rings on both the topand bottom of the steel guard.These are ideal for absorbing thegeneral impact expected fromindustrial use.

User benefits in operating theLeadlamp include a rubber handlefor enhanced grip, a convenient

retractable hook incorporated in the steel guard by which thehandlamp can be hung, and aweight of just over 2Kg.

The Ex GLS Leadlamp is sealed toIP54, protecting against the ingressof dust and rendering the enclosureweatherproof. It is supplied fittedwith 10 metres of cable, but issupplied without a lamp.

Wolf Ex GLS LeadlampTechnical Specification

Product reference LL-01EProduct description Explosionproof handheld leadlamp 439/GKCode II 2 G EEx d e llA T3Equipment category 2 GApparatus standards EN50014, EN50018, EN50019Type of protection ‘d’ flameproof, ‘e’ increased safetyArea of classification (gases) Zones 1 and 2, gas group IIATemp. classification (gases) T3Ambient temperature - 20°C to +40°CCertificate IBExU03ATEX1018XEnclosure Rubber with steel guard and cast iron lock ringLens Moulded glass, toughened and resistant to thermal shockLight source: Pt. no. LL-436

Type GLS rough service ES lampVolts 230VWatts 60WBeam 360°

Power source: Insulation Class IIVoltage 230Vac/dc

Ingress protection IP54 minimumWeight 2.1kg (excluding cable)




WOLF FLAMEPROOF LEADLAMP

ATEX

94/9/EC Directive

Compliant

0158

Complies with ATEX Directive

94/9/EC

High output halogen light,

up to 70 watts

Lightweight alloy construction for

single handed portability

Zone 1 & 2, Gas group IIC T3/T4

certified

Designed for quick and easy re-

lamping and maintenance

12, 24 or 42 Volts models available

Integral operation switch

Oil resistant rubber guard for drop

and impact protection

Ideal for cleaning, grit blasting and

painting operations

Wolf Flameproof Leadlamp LL-1255w with flood beam (approx 100°)Peak Luminous Intensity at 5m 180 lux



235 350

205


MMD/WK/10.04/3K



The Wolf Flameproof Leadlampis a lightweight portableFloodlight for use in potentiallyexplosive atmospheres. It complies with the ATEXDirective (94/9/EC) and has been certified to the EuropeanEN50014 series of standards bythe German test house DMT, foruse in zones 1 and 2, group II(surface industry) hazardous area applications. It is approved for safe use in all potentiallyexplosive gas, vapour and mistatmospheres to gas group IIC,where the T3/T4 temperatureclass permits.

Three different versions of theLeadlamp are available, with theoption of powering from a 12, 24or 42 Volt supply. Bulb ratingsvary from 55 to 70 Watts, allversions offering unparalleledlight output over an extremelywide 100° solid cone of light,ideal for confined spaceoperations.

The Flameproof Leadlamp has a die cast aluminium alloyconstruction making the productlightweight and portable, ideal forcarrying during extended shifts in offshore and onshore cleaningoperations. The Leadlamp isconstructed as a flameproofenclosure, containing thehalogen bulb, switch andconnecting wires. A flameproofthreaded joint allows internalaccess, making bulbreplacement and other minormaintenance a quick and simple

operation. A large hexagonalrubber moulded guard is fitted to the outside of the head of thelamp, ensuring the glass lens andthe flameproof threaded joint areboth protected from drop orimpact damage. The handle ismoulded in tough high impactplastic and fitted with a cableclamp, and provides protectionfor the increased safety clampedcable terminals.

Flameproof leadlamps are usedextensively in many explosiveatmosphere applications,particularly in cleaning, grit

blasting and painting operationsin tanks, silos and pipelines.

Cables and plugs of theappropriate rating and duty must be used. In explosiveatmospheres ‘Ex’ componentcertified plugs, sockets andsuitable fusing are required.

A leather carrying strap issupplied with each Lamp unit.

Wolf Flameproof LeadlampTechnical Specification

Product reference LL-12 LL-24 LL-42Product designation KHLE 70 EN

Product description High power halogen floodlight leadlamp

Code II 2 G EEx d e IIC T3/T4


Apparatus standard EN50014, EN50018, EN50019

Type of protection ‘d’ flameproof, ‘e’ increased safety

Area of classification (gases) Zones 1 and 2, gas groups IIA, IIB and IIC

Temp. classification (gases) T4 T3 T3


Certification DMT03ATEXE279

Enclosure Light alloy, high impact plastic, oil resistant rubber

Lens Toughened glass

Light source: Pt. no. LL-230 LL-232 LL-234Type Halogen filament lamp

Volts 12V 24V 42V

Watts 55W 70W 65W

Beam 100° wide angle flood

Life Up to 1000 hrs

Power source: Insulation Class III

Voltage 12 Vac/dc 24 Vac/dc 42 Vac/dc

Ingress Protection IP54 minimum

Weight 2.5 Kg (excluding cable)

A-TL45A/B

A-TL44A/B

5m

2.2m

0.9m

CE marked to ATEX Directive,

for use in zones 1 and 2

Hazardous Areas

Aluminium super-lightweight

construction

250 watt Halogen light output

Safe compressed air power source

Re-designed for greater reliability

Fitted with stainless steel

exhaust silencer

Dust ignition protected for zones

21 and 22 using remote exhaust

Group I Mining approval with

alternative brass construction

US Factory Mutual dual

marking approval

WOLF ATEX TURBOLITE

ATEX

94/9/EC Directive

Compliant

1180Alu

min

ium

supe

r-lig

htwei

ght

cons

truc

tion

Wolf Turbolite A-TL44A/B250w with ball glass for all roundilluminationPeak luminous intensity at 2.5mradius 70lux

Wolf Turbolite A-TL45A/B250w with polished reflectorspot beam (approx 10°)Peak luminous intensity at 5m2000lux

Wolf Turbolite A-TL45A/B250w with matt reflector floodbeam (approx 25°)Peak luminous intensity at 5m950lux

240

180

220

280

180

170

Wolf ATEX Turbolite lamps are highpower compressed air driven unitsfor use in potentially explosiveatmospheres. With a safety recordof 75 years, Wolf Airlamps are oneof the safest high power portablelamps for hazardous areas.

The new generation ATEX Turbolitemeets EN 1127 – 'Explosionprevention and protection’, forEurope; and in the USA, FM Class3600 ‘Electrical Equipment for use inHazardous (Classified) Locations’.

Used extensively in the petrochemical,oil and marine industries, WolfAirlamps provide illumination in manyapplications including shotblasting,cleaning and coating of storagetanks and vessels, and for pipelineand structural engineering activities,offering a safer alternative to mainsand low voltage lighting whereexplosive atmospheres present a serious risk to the workforce.

The standard range consists of two models, both produced in

high strength aluminium alloy. The A-TL44A ‘Bay Light’ versionprovides a high level of all-roundgeneral illumination. The A-TL45A‘Floodlight’ version has a reflectorhead with a matt reflector giving awide-angle diffused beam.

The ‘A’ suffix denotes ATEXlightweight aluminium models,reducing Turbolite weight toapproximately half that of thebrass airlamps. Alternative ‘B’ suffixmodels A-TL44B and A-TL45B arealso ATEX but with brass housings,usable in gassy mines. All lamps are nickel plated to protect againstcorrosion and are supplied with a bridle and safety hook fitted.

The Turbolite is powered, purged,pressurised and cooled bycompressed air controlled by anintegral regulator, which passesthrough the lamp head and drivesthe turbine wheel by means of threenozzle plates. The turbine drives amagnet rotor within windings,

generating the 24 Volt ac electricalsupply which powers the 250 Watthalogen bulb.

Major improvements over theexisting models, include sealedbearings, a refined regulator, greateruse of stainless steel components, a bulb-life enhancing device and a new silencer, incorporating aparticle trap.

Special conditions of certificationfor all Turbolites are that clean, drycompressed air and anti-static airhose are used to operate the lamp,minimising contamination inside thelamp and dangerous accumulationof static electricity. When used in potentially explosive dustatmospheres a ‘remote exhaust’must be used, exhausting air to the safe area.

A full range of accessories isavailable, including anti-static hose,filters, filter stands, airlamp tripodsand setting and testing devices.

Wolf ATEX TurboliteTechnical Specification

Product reference A-TL44A A-TL44B A-TL45A A-TL45BProduct description Safety bay light, compressed air powered Safety flood light, compressed air poweredCode ATEX Industrial II 2 GD II T4 (Tamb = 55°C) T135°C

ATEX Mining I M2 I M2FM Class 1 Div 1 Groups A, B, C, D. T4 Ta = 55°C

Equipment category 2 GD M2 M2

Apparatus standards EN1127:1998Type of protection Technical FileArea of classification (gases) Zones 1 and 2, Gas Groups IIA, IIB, IICTemp. classification (gases) T4Area of classification (dusts) Zones 21 and 22Max surface temp. (dusts) T135°CAmbient temperature -20°C to +40°CCertificate SIRA02ATEX5099XEnclosure Aluminium Brass Aluminium BrassLens Ball glass/plastic dome Toughened glass (15mm)Beam type All-around 360°C illumination Flood (as standard) or spot to orderLight source: Pt. no. A-129 (as standard)/A-159 (alternative)

Type Halogen filled filament bulbVolts 24vWatts 250wOutput 6000 lm/9000 lmLife 2000 hrs/200 hrs

Power source: Type Compressed air driven turbo-alternatorAir pressure 5.0-8.0 barConsumption 0.75m3/min

Ingress protection Once pressurised, may be used underwaterWeight 5.5kg 9.4kg 7.1kg 13.5kg

Special A clean dry air supply must be usedcertification conditions Supply hose must be anti-static

Lamps used in explosive dust atmospheres must have a remote exhaust hose to the safe area


MMD/WK/10.04/3K



Multi-functional, selectable

torch-flash-strobe output

ATEX approved for use in

explosive atmospheres

Can be used as a Zone 0

mini torch

Up to 10hrs duration in

torch mode

Enhanced user conspicuity

in dark conditions

High intensity LED light source

High strength polycarbonate

case

Small and lightweight

IP67 watertight and dust tight

WOLF ATEX LITETRACKER & BIKELITE

1180

ATEX

94/9/EC Directive

Compliant

LiteTracker LT-131 and Bikelite LT-131BLED medium angle beam (approx 15°)Peak luminous intensity at 1m 14 lux, at 2.5m 2 lux

45 25

65

4025

The LT-2000 series LiteTracker, and LiteTracker Bikelite are thelatest developments from theLiteTracker range for indication and illumination in explosiveatmospheres.

The LiteTracker is ideal as apersonal indicator to identify theposition of workers in confinedspaces. Alternatively, it can beswitched to torch mode and used as a mini flashlight for close inspection work.

The LiteTracker Bikelite is adevelopment for bicycle users onchemical sites. It can be fitted to a bicycle frame and will highlight a cyclists’ position, maximisingvisibility in low light and night time conditions.

All LiteTracker versions arecompliant with the 94/9/EC ATEXDirective for use in potentiallyexplosive atmospheres, and can be used in Zones 0, 1 & 2hazardous areas, within T4temperature classification.

All models utilise a high intensity LEDlight source that can be seen at nighttime from distances of up to onekilometre, and will last the life of theproduct. The LiteTracker is availablein five different colours, the mainapplication being for the white LT-131model, for use as a Zone 0 mini torch.The LiteTracker Bikelite is available in white (front) and red (rear).

Low running cost is guaranteed with the use of two standard alkalineLR03 (AAA) batteries, delivering an

8 – 10 hour duration on torch mode,up to 50 hour on flash sequence, or a 30 hour strobe light output.Different outputs (torch-flash-strobe)can be selected using the topmounted push-button switch.

The LiteTracker has a high strengthpolycarbonate casing with a metalgrip clip and D ring fitting forattachment to webbing or clothing.The LiteTracker Bikelite is suppliedwith a stainless steel bracketattached to the polycarbonate case, and a bicycle frame bracket towhich the Bikelite can be easily fitted,or removed for storage in a pocket.

Weighing only 100g, including cellsand sealed to IP67, all LiteTrackerversions will be unaffected byexcessively wet conditions.

WOLF SAFETY LAMP COMPANYSaxon Road Works, Sheffield S8 0YA, EnglandTel: +44 114 255 1051 Fax: +44 114 255 7988E-mail: [email protected] Website: www.wolf-safety.co.ukMMD/N/12.03/4K


Note: this product is intended to enhance the visibility of bicycle users on private roads. Users should establish suitability for use on public roads withregard to legal requirements, etc.

All information has been gathered under laboratory conditions, the user must regard the values given as approximate. The Company reserves the right to alter product specifications without prior notice.

Wolf LiteTracker & Bikelite – LT2000 seriesTechnical Specification

Product reference LT-131 LT-133 LT-135 LT-137 LT-139 LT-131B LT-135BProduct description Personal “Ex” mini torch/strobe light “Ex” Bikelite Code II 1 G EEx e ib IIC T4Equipment category 1GApparatus standards EN50014, EN50020Type of protection Intrinsic safetyArea of classification (Gases) Zone 0, 1 and 2, gas groups IIA, IIB and IICTemp. classification T4Ambient temperature -20 °C to +40°CCertificate BAS99ATEX1017Enclosure PolycarbonateLens Internal prismatic light multiplier/diffuserLight source: Type Solid state LED

Colour white amber red blue green white redPower source: Pt. no. 2 x LT-401

Type AAA (LR03 recommended)Volts 2 x 1.5v

Light duration: Glow 8-10 hrsFlash Up to 50 hrsStrobe Up to 30 hrs

Ingress protection IP67 to EN60529:1992Weight (incl. cells) 100g

1180

ATEX Certified intrinsically

safe “ia” for safe use in

Zones 0, 1 or 2

Flashing or static output

selectable from exterior

mounted operation switch

Continuous operation in

flashing mode of up to two

months, flash rate 60/min

Daylight cut-out mode

selectable from internally

mounted switch

Ultra-bright L.E.D. light

source

180° bi-directional lens

arrangement

Highlighting obstacles and

dangers in the hazardous

area

Effective demarcation of

hazardous area zones

Short term hazardous area

warning, ie Road traffic

accidents, Petroleum

tanker discharge

WOLF HAZARD LAMP HL-95

355

165 180

ATEX

94/9/EC Directive

Compliant

The HL-95 Wolf Hazard Lamp is asemi-portable, free standingilluminated warning device for usein zone 0, 1 or 2 hazardous areas.Approved to the European EN50range of standards called up in theATEX Directive for “ElectricalApparatus for Potentially ExplosiveAtmospheres” and carrying the CEmark with Baseefa (2001) NotifiedBody number. The Wolf HazardLamp is a unique product amongstportable “Ex” lighting equipment.

The HL-95 is powered by an air-depolarised primary cell battery.The use of this battery technologyis ideal in such an application dueto the exceptionally high capacityavailable from the relatively small,light weight package size. A singlebattery, used in the flashing lightoutput mode, provides continuousduration for up to 1500 hours, ortwo months. In static mode wherethe lamp is continuously lit, theduration will be up to 500 hours.Operation of the lamp andselection of flashing or static modeis made from a single three positiontoggle switch mounted on theoutside of the lamp. A furtherextension to the duration of thebattery output can be achieved byselecting “daylight cut-out mode”via the internally mounted selectionswitch. If the lamp is being usedout of doors a light dependantresistor will detect when darknessfalls and accordingly activate the lamp. Equally, when light levels increase, the lamp willautomatically switch off, conservingbattery energy. It is estimated that a lamp set to flashing and in daylight cut-out mode couldoperate for up to six months from a single battery.

The HL-95 has two lensespositioned “back to back”. Light isprovided by a pair of “everlasting”light emitting diodes. The use ofsuch solid state devices allows thelamp to be sited in zone 0, 1 or 2hazardous areas. The light emittingdiodes are coloured amber asstandard or red to special orderand are positioned behind atransparent plastic lens, coloured tocorrespond with the light emitted.

The lens is protected from damageby a stainless steel guard fitteddirectly to the impact resistantpolypropylene lamp body.

Maintenance and user instructionsand a lock key are supplied witheach lamp.




Wolf HL-95 Safety Hazard LampTechnical Specification

Product reference HL-95

Product description Primary batteryoperated safety

hazard lamp

Code II 1 G EEx ia IIC T4


Apparatus standard EN50 014, EN50 020

Type of protection “ia” intrinsic safety

Area of classification Zones 0, 1 and 2, gas groups IIA, IIB and IIC



Certification BAS99ATEX1044

Enclosure Polypropylene with stainless steel lens guard

Lens Transparent plastic, colour as light source

Light output ≈ 2 cd, comparable to requirements for BS 3143:pt2, Road danger lamps

Light source: Type Solid state L.E.D.

Colour Amber as standard, red to order

Power source: Pt. no. HL-3155X

Type Air-depolarised primary cell battery

Volts 5.6v

Capacity 50Ah

Weight 1.7kg

Dimensions L 110 x W 110 x H 140mm

Light duration 1500hrs flashing mode, 500hrs static mode

Ingress protection IP 21

Weight (incl. battery) 2.9kg

Documents

WOLF Ex-PENLITE PL-01mega-ex.com/product_hazardous/Electrical Equipment/Wolf...temperature class, in zone 1 & 2 (category 2) hazardous areas. The Wolf Ex-Penlite has a brass body with