4.02.08updated

Wheeled Excavators Wacker Neuson Compact Excavator 6503 • 9503

Ultimate Urban ExcavatorsMobility that saves time and money

2_3 WACKER NEUSON INTRODUCTION

Wacker Neuson’s wheeled excavators are the most compact available and are the ultimate urban excavator. (Local regulations may vary, check with your local dealer regarding road travel) The compact size, speed and mobility make them the ideal machine for a variety of applications that require the excavator to move around the job site or to and from the job site in municipal areas. The 9503 and 6503 are the fastest mobile excavators in their class with 25 mph top speed for the 9503 and 19 mph for the 6503.

Wacker Neuson Facts:

•Savetimeandmoney!Gettoyourjobfaster, no need for a truck and driver.

•Hightravelspeedsimproveproductivity: 6503 up to 19 mph and 9503 up to 25 mph.

•Largefueltanks/lowconsumptionsaves time and money. 6503 - 22 gal tank and 9503 – 45 gal tank.

•Highspeeddrivepower.

•Dieselenginescomplywithallnoiseand exhaust standards.

Ultimate Urban ExcavatorsMobility that saves time and money

FUEL CONSUMPTION FOR THE 9503 : 2.0 GPH for 80 % excavating and 20 % driving

25 m

iles

In 12 minutes you can get to your job 5 miles away withnotrucking! •Withina25mileworkradius,

be anywhere in 1 hour.

•Notrailer/spacerestricts.

•Easyaccesstonarrowroads.

•Travelsonasphaltwithoutdamaging road.

•Navigatedowntownareaswith ease (no trailer).

Work smarter and more efficiently: The wheeled excavator advantage.

In the 60minutesittakestoload/unloadatrackexcavatorYOUCOULDBEDIGGING

How often do you move your machine each day?

With a wheeled excavator you can save 60 minutes everytime. That’s two hours for every roundtrip toonejobsite!

LOAD TIME UNLOAD TIME

25 m

iles

in o

ne h

our

4_5 WACKER NEUSON INTRODUCTION

60MINUTESOVER TRACK EXCAVATORS

SAVINGSOF APPROXIMATELY

In the 60minutesittakestoload/unloadatrackexcavatorYOUCOULDBEDIGGING

Wacker Neuson improves your bottom line:

Howmuchcanyouget accomplished in the 60 minutes saved?

Move quickly. Excavate precisely. Work economically: The Wacker Neuson hydraulics simply moves more.

The load sensing hydraulics offer quality performance: safe and precise excavation is routine for the 9503.

Moreover,theLUDVpressurescaleofthe9503ensuresoptimalprductivity.This makes it possible to carry out several movements at the same time withoutlossoftimeorperformance:Completeprecisionandbalanceisachieved with the first control impulse, regardless of function and load.

- Optimized work cycles for more performance per unit of time.- Bestdevelopmentofpower,justwhereitisespeciallyneeded.- Simplest handling and quick familiarity for professionals. - Additional hydraulics with hammer return pipe are standard.- Highestreliability.

Wacker Neuson Facts 9503 :

• Synchronized and smooth arm movements. • Highlymobileandversatile.• Comfortable operation for driver.• Fast on the road and powerful on the job.

6_7 WACKER NEUSON HYDRAULICS

The load pressure independent through flow distribution (LUDV System) ensures that each hydraulic cylinder is supplied with the same quantity of oil, even under differentloadings.Theresult:a constant working speed independent of the load, an optimal synchronisation of all movements and consistent movement of the joystick. This way the driver gets a feeling for the machine quickly.

Power control (6503).

The power control ensures an optimal exploitation of the performance of the diesel engine.

If the pressure in the hydraulic system increases due to greater loads, the power control ensures that the diesel engine does not become overloaded by reducing the discharge quantity of the variable displacement pump.

This allows the engine speed to remain constant for greater efficiency. Several work movements can be carried out simultaneously without a drop in performance of individual movements. The power control helps make the diesel engine durable.

Wacker Neuson Facts 6503 :

• Easy to operate for maximum productivity.• Simple and robust construction.• Large capacity diesel engine with optimally

tuned hydraulic system.• Highlyeconomicalwithalonglife.• Highoperatingcomfortforthedriver.

Stable. Fast. Agile.The Wacker Neuson 6503/9503 are well suited for any application.

The 6503 is unrivaled in size, power and superiority:

The high horsepower engine offers excellent performance and the pivot arm allows for operation in confined areas. Machine is fitted with twin tires and leveling blade at the rear as standard.

The 9503 is the sum of the technical possibilities. Perfectly combined.

Its high degree of stability is ensured by an optimal distribution of weight. Stabilizer brackets in the front and levelling blade on back guarantee maximum stability while working. Twin tires provide stability on the move as well as while digging and carrying loads.

THE WACKER NEUSON MOBILE EXCAVATORS 6503/9503 AREPOWERFULANDPROVENMULTIFUNCTIONALMACHINES,INWHICHALLWACKERNEUSONSKILLSAREUNITED:APOWERFULSYSTEMONASTABLEPLATFORMWITHADVANCEDENGINEERING;TESTEDCOMPONENTSANDINTELLIGENCEINEVERYDETAIL.

1 Arm System for the 6503/9503. Sensitively operated arm system for efficient excavation work up to a depth of 12 feet.

2 The individually controllable front stabilizers and rear blade on the 9503 ensure a stable standing even on difficult uneven ground. Working on curbs or on uneven ground is made secure and gives full freedom of movement.

3 The levelling blade of the 6503 and 9503 are installed at the back as standard for additional stability.

2

1

3

8_9 WACKER NEUSON POWER UNITS

The best can be found easily:Manueuverability is key.

Wacker Neuson is big in the compact class. 25 years of mobile excavators. Both models 6503/9503 keep their unique edge:

They are manueuverable, stable, powerful and simple to operate. Their minimal overhang at the back makes working in confined areas safer.

10_11 WACKER NEUSON MANUEVERABILITY

Wacker Neuson Facts:

• The6503/9503offerexcellenttravel on the road plus good off road performance.

• In drive mode, the front axle oscillates and when digging it locks for extra stability.

1 Simple automotive steering (6503/9503) with a agile design for traveling in road traffic.

2 The axle oscillation lock makes the machine more stable. The axle lock is switched on automatically by operating the main brake. It can also be locked manually for quicker movement of loads.

3 Machine sits firmly when working. The external brakes of the 9503 on the rear axle prevent wheel movement during excavating. Play in the shaft, bearings and pin joints can no longer cause destabilization.

1

2 3max.

16° for the

6503

max. 11° f

or the 9503

Intelligent performance management: The cost saving engine design.

Auto idle: After 5 seconds without movement the engine automatically switches to idle. This reduces fuel consumption and noise.

The particularly economical engines meet all the applicable environmental obligations.

Quality inside and out.Spacious and easy access for servicing. The greatest in the compact class.

1

Wacker Neuson Facts:

•Highstrengthsteel construction.•Heavyduty,hardened

steel, replaceable bushings on generously dimensioned bearings.

•Highqualitycomponents.• Tippable cab.

SPACE FOR HIGHEST PRODUCTIVITY: DESIGNEDWITHTHEGREATESTMOBILITY,SPEED,ANDINCREASEDPRODUCTIVITY.

Spaciousness and ergonomics pay for themselves: The cab design from Wacker Neuson.

- ROPS-, FOPS-, TOPS- certified safety concept.- Layout and design of the interior space for a car-like driving experience.- Wider entry, grip handles.- Adjustable driver’s seat, joystick, arm rests and steering wheel.- 5 way adjustable driver’s seat.- Controloftheinsidetemperaturewith;heat and air conditioning.- Low operating noise.

COMFORTABLE CAB INTERIOR

1 Easy access for servicing. The quickest way to save time and money.

- Tippable cab. - Large covers.

- Unobstructed access to all components.

2 New cab interior with ample head- and legroom and newly integrated storage areas. Also new: the stable joystick mounting, instrumentation mounting and pedals. Easy driver access thanks to wider and higher doorways. Armrests can be folded back.

12_13 WACKER NEUSON SERVICE, CABS

INNOVATIVE WINDSCREEN SYSTEMFORCOMFORT,COMMUNICATIONANDSECURITY:

1 Fully glazed front: Excellent visibility and perfect protection from wind and weather. A thoroughly tried-and-tested concept (tilted position).

2 The top sliding section: simply slides under the cab roof where it is safely stowed.

3 Dialogue position: The lower pane slides under the upper pane. This allows the driver to communicate with people outside the excavator.

4 Both sliding panes are stowed under the cab roof. There is no need to remove them or store them elsewhere. This reduces the likelihood of their damage.

2

The right excavators for the job.Mobility, powerful and proven.

14_15 WACKER NEUSON ON THE JOB

The right excavators for the job.Mobility, powerful and proven.

Versatile tool carrier:

•Hydraulicbreakers.• Swivel buckets to clean out ditches.• Move jersey barriers. (9503)• Place pipes and rocks.

Versatile tool carrier:

•Hydraulicbreakers.• Swivel buckets to clean out ditches.• Move jersey barriers. (9503)• Place pipes and rocks.

A = reach from turnstile center, B = load fixing height from ground level. The data (lbs) refer to the machine without digging equipment and are in compliance with ISO 10567. Overall length with dozer blade supported. Neither 75% of the static tilting load nor 87% of the hydraulic lifting power are exceeded.*The lifting power is hydraulically limited.

LIFTING POWER 6503 (Units: lbs)

16.5 ft 13 ft 10 ft 6.5 ft max.

0° 90° 0° 90° 0° 90° 0° 90° 0° 90°

10 ft - - 2524* 2888 - - - - 2546* 1973

6.5 ft 2668* 1984 3053* 2767 4101* 4222 - - 2624* 17973 ft 2888* 1929* 3627* 2646 5456* 3946 - - 2734* 1764

ground 2987* 1896* 3968* 2557 5986* 3814 - - 2877* -3 ft - - 3880* 2535 5754* 3803 9943* 7408 3031* 2094

-6.5 ft - - - - 4597* 3880 7562* 7573 3142* 2844

DIMENSIONS 6503a – Height of cab ft-in (mm) 9' 5" (2875)

b – Width ft-in (mm) 6' 7" (2465)

c – Transport length (boom down) ft-in (mm) 19' 3" (5880)

d – Max. digging depth ft-in (mm) 11' 7" (3540)d*– (long dipperstick) ft-in (mm) 12' 7" (3840)

e – Max. vertical digging depth ft-in (mm) 8' 4" (2540)e*– (long dipperstick) ft-in (mm) 9' 3" (2820)

f - Max. digging height ft-in (mm) 19' 7" (5975)f*- (long dipperstick) ft-in (mm) 20' 3" (6165)

g – Max. dumping height ft-in (mm) 14' 1" (4305)g*– (long dipperstick) ft-in (mm) 14' 9" (4495)

h - Max. digging radius ft-in (mm) 20' 6" (6240)h* - (long dipperstick) ft-in (mm) 21' 5" (6525)

i – Max. reach on the ground ft-in (mm) 19' 10" (6045)i*– (long dipperstick) ft-in (mm) 20' 10" (6345)

k - Tail swing radius ft-in (mm) 4' 10" (1465)

n – Max. blade lift above ground in (mm) 1' 7" (490)

o – Max. blade lift below ground in (mm) 11" (285)

p - Wheelbase ft-in (mm) 6' 11" (2100)

q – Max swing angle to right 51°

r – Max swing angle to left 75°

s - Min. boom radius ft-in (mm) 7' (2129)

Max. arm force lbf (kN) 5800 (25,8) (long dipperstick) lbf (kN) 5193 (23,1)

Max. bucket digging force lbf (kN) 8745 (38,9)

q

r

k

bl

m

f (f*)

d (d*)

g (g*)

e

a

i (i*)

h (h*)

cp

n

o

I- Excavator against the driving direction with stabilizer blade loweredII - Excavator against the driving direction with stabilizer blade raisedIII - Excavator in driving direction with stabilizer blade raisedIV - Excavator 90º to driving direction with stabilizer blade raised

A = reach from turnstile center B = load fixing height from ground level

LIFTING POWER 9503 (Units: lbs)

16.5 ft 13 ft 10 ft max.I II III VI I II III VI I II III VI I II III VI

10 ft 4641* 3351 4553 3461 5027* 4762 5027* 4949 - - - - 4575* 2833 3847 29215 ft 5490* 3164 4354 3274 7066* 4365 6096 4530 - - - - 4872* 2579 3538 2657

ground 5952* 3020 4200 3120 8113* 4101 5809 4266 12621* 6228 9248 6570 5302* 2701 3737 2789-3 ft - - - - 7716* 4057 5765 4222 11563 6162 9248 6559 5644* 3109 4332 3219

The data (lbs) refer to the machine without digging equipment and are in compliance with ISO 10567. Neither 75% of the static tilting load nor 87% of the hydraulic lifting power are exceeded.*The lifting power is hydraulically limited.

DIMENSIONS 9503a – Height of cab ft-in (mm) 9' 9" (2980)

b – Width ft-in (mm) 8' 3" (2509)

c – Transport length (boom down) ft-in (mm) 22' 6" (6847)

d – Max. digging depth ft-in (mm) 12' (3646)d*– (long dipperstick) ft-in (mm) 13' (3950)

e – Max. vertical digging depth ft-in (mm) 8' 6" (2596)e*– (long dipperstick) ft-in (mm) 9' 6" (2895)

f – Max. digging height ft-in (mm) 20' 6" (6237)f*– (long dipperstick) ft-in (mm) 20' 11" (6372)

g – Max. dumping height ft-in (mm) 13' 11" (4253)g*– (long dipperstick) ft-in (mm) 14' 5" (4388)

h – Max. digging radius ft-in (mm) 22' 5" (6827)h*– (long dipperstick) ft-in (mm) 23' 4" (7100)

i – Max. reach on the ground ft-in (mm) 21' 7" (6576)i*– (long dipperstick) ft-in (mm) 22' 6" (6864)

k – Tail swing radius ft-in (mm) 5' 1" (1550)

n – Max. blade lift above ground in (mm) 1' 8" (498)

o – Max. blade lift below ground in (mm) 5" (132)

p – Wheelbase ft-in (mm) 7' 3" (2200)

q – Max swing angle to right 63°

r – Max swing angle to left 67°

s – Min. boom radius ft-in (mm) 8' 4" (2528)

Max. arm force lbf (kN) 9069 (40.3) (long dipperstick) lbf (kN) 8170 (36.3)

Max. bucket digging force lbf (kN) 11,375 (50.6)

q

r

k

b

f

d

g

e

a

i

h

cp

n

o

Projection from the middle of the turntable

Load sling height above ground level

A

B

*Lifting force is restricted hydraulically. All values in the table are given in kg, at horizontal standing on hard ground and without bucket. If a bucket or other work tool is attached, the lifting power or tipping load is reduced by their weight. Basisofcalculations:asISO10567.Theliftingpowerofthecompactexcavatorislimitedbytheadjustmentofthepressure control valve and by the tipping security. Neither 75 % of the static tipping load nor 87 % of the hydraulic lif-ting power is exceeded.

without levelling blade support90° to direction of travel90°

with levelling blade supportin direction of travel0°

9503

GENERAL Twin tires (750 / 15) Mono arm Leveling blade Stabilizers Two wheel steering Max. driving speed 25 mph Power grab frame 12V-lighting installation Work floodlight on lifting arm Tool set incl. grease press and maintenance manual

MOTOR Water cooled DEUTZ-turbo diesel engine Engine speed automatic

CAB Glazed; tippable safety cab Air conditioning, cab heating, sliding window at the side,

windscreen can be lowered inwards, windscreen wiper washer system,fullylinedinternally,cabmeetstheROPS/FOPSandTOPS regulations.Prepared for radio (cabling, loudspeakers, aerial)Pre-cabled (cab headlight and swivel light)2 external mirrors (cab left, chassis right)

HYDRAULICS Variable displacement pump withLUDVcontrolandtotal

power control in connection with 2 x displacement gear pumps (workinghydraulics).Pumpperformance:167+2x38.5l/minDisplacement pumps in closed circuit with load limit control (drivinghydraulics)Pumpperformance:145l/minHydrostatic four wheel drive switchableunderload;withinfinitelyvariablespeedcontrolin2drivingranges;additionalhydraulic drive pedal for work mode.Hydraulic oil coolerHydraulic pre-control with joystick operationValve control as ISOAdditional hydraulic connections for 2 movement directions on bucket arm Front axle (hydraulically controlled planetary transmission axle suspended oscillating, with hydraulic locking device when operating the handbrake, with integrated multi disk brakes running in oil bath).Rear axle (rigid planetary transmission axle with inner no play lamella brakes)Enlarged pressureless hammer return pipeProportional auxiliary controlsFlat face couplersISO/SAE control patern switch valve

OPTIONS 9503

Long dipper stick

STANDARD EQUIPMENT 6503

GENERAL Twin tires (750 / 15) Max driving speed 19 mph Leveling blade Work floodlights lifting arm, front and rear Tool set incl. grease press and maintenance manual

MOTOR Water cooled YANMAR diesel engine Engine speed automatic

CAB Glazed safety cab Air conditioning, cab heating, sliding window at the side,

windscreen can be lowered inwards, windscreen wiper washer system,fullylinedinternally,joystick,armrests;cabmeetstheFOPS and TOPS regulations.Prepared for radio (cabling, loudspeakers, aerial)2 external mirrors (cab left, chassis right)Cabling (floodlight and swivel light)

HYDRAULICS Buzz power control Hydraulic oil cooler Hydraulic pre-control with joystick operation Valve control asISO,DIN,SAE,PCSAandEURO Parking brake for driving and swivelling gear Main brake Handbrake (hydraulic spring-operated brake) Hydraulically controlled front axle suspended oscillating with hydraulic locking device Rigid rear axle Additional hydraulic connections for 2 movement directions on bucket arm (1685 mm) 2 Speeds for off road and on road driving Pre-operated load holding valve for lifting arm cylinder Totalling function for lifting arm cylinder Hammer return pipe large

Proportional auxiliary controls Flat face couplers ISO/SAE control patern switch valve

OPTIONS 6503

Long dipper stick

Right reserved to make changes without notice. No guarantee for information. The contractual agreement is exclusively decisive.

TECHNICAL DATA 6503 Mono-/pivot arm 9503 Mono-/pivot armTransport weight Cab lbs (kg) 12,566 (5700) 21,495 (9750)

ENGINEMake / Model Yanmar4TNV98 DeutzTCD2012

Type water cooled Turbo-charged, water cooled 4 cylinder diesel engine 4 cylinder diesel engine

Max. operating power hp (kW) 58.2 (43,4) 100.4 (74,9) at operating speed rpm 2100 2400

Power rating specification ISO 3046 ISO 3046

Fuel tank capacity gal (l) 21.9 (83) 44.9 (170)

PERFORMANCEDrive speed 2-speed mph (kph) 0-6.2 (0-10) 0-8.1 (0-13) 0-18.6 (0-30) 0-24.9 (0-40)

Gradeability 24.9°/46.5% 38.7°/80%

Ground clearance in (mm) 10.6 (270) 14.2 (361)

StandardTires 7.5-15 14 PR twin tires 8.25-20 14 PR twin tires

Drive Hydrostaticall-wheeldrive Hydrostaticall-wheeldrive

Steering Front wheel steering Front wheel steering

Oscillation angle 16° 11°

Brakes working drum multiple disc parking mechanical mechanical

Blade width mm / in ft-in (mm) 6' 5" (1965) 8' 1" (2465)

Overall width of outriggers in (mm) max. lift above ground – 1' 4" (416) max. lift below ground – 4" (112)

HYDRAULICSPump Doublevariablecapacitypump+ Doublevariablecapacitypump+ double gear pump double gear pump

Pump capacity gal/min 16.9+16.9+12.7+2.7 38.3+44.1+2x10.2 (l/min) (64,1+64,1+48,0+10,3) (145+167+2x38,5)

Operating pressure for working and driving hydraulics psi (bar) 3263 (225) 6382 (440)

Operating pressure for slewing gear psi (bar) 3408 (235) 3553 (245)

Hydraulic tank capacity gal (l) 21.1 (80) 44.6 (169)

NOISE LEVELNoise level (LWA) (to 2000/14/EG) 98dB(A) 101dB(A)

4.02.08updated

www.wackerneuson.com

Wacker Neuson is a global manufacturer of light and compact equipment with a comprehensive portfolio. Wacker Neuson’s emphasis stands firmly on outstanding quality, innovative technology, personalized service and close customer contact.

In the United States and Canada, Wacker Neuson products are sold and rented by a network of over 4000 dealers and supported by an industry leading team of factory trained sales, application and service personnel. All parts are available through Wacker Neuson’s USA distribution center and are typically shipped within 24 hours of ordering.

WackerNeuson’slineofcompactequipmentfeaturesa24-month/2000hourbumper-to-bumper warranty. From excavators to wheel loaders to dumpers - two years of complete warranty coverage offers a great value to contractors. Valid in US and Canada only. See dealer for details.

Look no further than Wacker Neuson equipment and job site consulting for all phases of the construction process.

Wacker Neuson supports professional users in their daily work. Any time, any place.

Look no further than Wacker Neuson equipment and job site consulting for all phases of the construction process.

WARRANTYMONTH24

Helv Nue heavy extended

Helv Extra black condensed

Helv Nue heavy

0986

094/Fe

brua

ry-201

2/La

youtG

oesStudio/Prin

tingMarek

Group