witeg GER100920-1 - PMI-Labortechnik · Fuzzy Control System 4, 5 - Digital Intelligence, Maximum Efficiency - Autoclaves - Steam Sterilizer WiseClave 8~11 Baths 12~34 Circulation

witeg

Laboratory Instruments

Gel Doc. SystemPage. 38~41

HomogenizersPage. 64~68

Heating & Cooling BlockPage. 45~49

Digital RotatorPage. 132

Vortex MixerPage. 133

ULT(Deep) FreezersPage. 120~129

Hotplate StirrersCompact & Round-plate Page. 75, 78, 79

Heating MantlePage. 50~63

ISO 9001:2000 CertifiedISO 13485 Certified Products

CE-Marked ProductsCE-MDD Marked Products

Validation (IQ, OQ & PQ) Service

www.witeg.de

ww

w.w

iteg

.de

ISO 9001 : 2000 CertifiedISO 13485 Certified ProductsCE-Marked ProductsCE-MDD Marked ProductsValidation (IQ, OQ & PQ) Service

www.witeg.de

GER100920

GER

100920

witeg Labortechnik GmbHAm Bildacker 16 ● D-97877 WertheimP.O.Box16 63 ● D-97866 Wertheimphone : +49 (0) 9342 / 9301-0fax : +49 (0) 9342 / 9301-77Internet :www.witeg.deE-mail : [email protected]

DIN ISO 9001

Quality-assurance at the users, an additionalachievement at no cost... from witeg

Together with witeg into the future

It is our aim to keep on translating our company’s philosophy into reality,

preliminarily quality to the benefit of our customers. We permanently

perform investment of qualified and engaged collaboration in order to reach

the optimum level of quality.

Furthermore, we stress to make use of the latest computer-aided

equipment and technique which is necessary to obtain best performance

and utmost quality.

witeg-qualitycertified according to DIN 9001 at a very early stage

Already in May 1994 we obtained the Certification "ISO 9001 "

ensuring officially that witeg complies with the highest international

standards of requirement.

To our business partners this means confidence and reliability for a

common safety handling of our products in the future. In order to offer high

value instruments, in a period of tough international competition, it is

important to rely on rational quality-ensuring economical processes.

Eventually, we wish to remain powerful pricewise.

Whenever you work according to EN ISO9000 et seq., with the products of witeg

you process it easily. Quality is our target tothe benefit of our partnership. Quality

SafetyEnvironment Management

●CE-marks EMC & LVD Compliance.

The certified Laboratory Instruments are

specified in this catalog

●ISO 9001:2000 System Certification

Design, Development, Manufacture & Servicing

for All Laboraory Instruments.

www.witeg.de

Certificates

CERTIFICATES

3

Legal notice

Factory 1 - Production & ManagementAm Bildacker 16D-97877 Wertheim

Factory 2 - Stock & ForwardingHüttenweg 3D-97877 Wertheim

phone : +49 (0) 9342 / 9301 - 0fax : +49 (0) 9342 / 9301 - 77Internet: www.witeg.deE-mail: [email protected]

�� copyright 2010 witeg Labortechnik GmbH

Digital Fuzzy Control System - Digital Feedback control by High-Performance

Microprocessor- Superior control accuracy for Temperature & RPM

Easy-to-Use- Compact Design and Simplest User-Interface- 1 or 2 Mode Buttons + Jog-Shuttle Switch

Patented User-Interface- Specially Designed Operation Mode Mechanism

for Intuitive Setting & Control

- Simple Mode Transition (eg. Set Temp Mode �

Set RPM Mode � Set Timer Mode � Locking Mode)

Digital LCD Display- High-Quality LCD with Back-Light Function

- Displays Set Value, Present Value and Operation Status

Intuitive Operation Lamps- Indicates Operation Status of the Machine

Heating, Stirring, Timer, Refrigeration, etc.

Jog-Shuttle (Turn + Push)Unified Controlling Knob for All Operation of the Unit- Input of Set Value, Start & Stop of Operation,

Storage of Set Values

Fuzzy Control SystemDigital Intelligence, Maximum Efficiency

Multi-Functional Digital Feedback Controllerincorporated into all witeg Digital Instruments

Innovative Laboratory Instruments with Intelligent Digital Control Technology

◀

◀

◀

▶

▶

▶

Fuzzy ControlD

igit

al I

nte

llig

ence

,M

axim

um

Eff

icie

ncy

4

WiseBath�� Water Baths, Extraction Baths, High-temp Baths,Shaking Water Baths and Viscosity Baths

WiseCircu�� Circulation Water Baths, High-temp Bath Circulators,Refrigerated Bath Circulators and Cold Trap Baths

WiseClave�� Autoclaves (Steam Sterilizers)WiseCryo�� Freezers & Ultra Low Temperature FreezersWiseCube�� Incubators, Cold Lab Chambers, Growth Chambers and Temp./Humidity

ChambersWiseDoc�� Gel Documentation SystemWiseMix�� Mills, Mixers, Rockers, Rotators and Vortex MixerWiseShake�� ShakersWiseStir�� Magnetic Stirrers, Overhead Stirrers and Jar TestersWiseTherm�� Furnaces, Heating Mantles, Hotplates and Thermo BlocksWiseTis�� HomogenizersWiseUv�� TransilluminatorsWiseVen�� Ovens

Registered Trademarks for Intelligent LaboratoryInstruments made by witeg Labortechnik GmbH▶▶

www.witeg.de 5

Family

Fuzzy Control System 4, 5- Digital Intelligence, Maximum Efficiency -

Autoclaves - Steam Sterilizer WiseClave� 8~11Baths 12~34

Circulation Water Baths WiseCircu� 15, 16Cold Trap Baths WiseCircu� 30Extraction Water Baths WiseBath� 18, 19General Purpose Water Baths WiseBath� 13, 14 High Temperature Circulators WiseCircu� 24, 25High Temperature Oil Baths WiseBath� 22, 23Immersion Circulator Head WiseCircu� 17Multi - Chamber Water Baths WiseBath� 20, 21Refrigerated Bath Circulators WiseCircu� 26~29Shaking Water Baths WiseBath� 31, 32Viscosity Water Baths WiseBath� 33, 34

Centrifuges WiseSpin� 35Dry Bath-Heating & Cooling WiseTherm� 45~49Electrophoresis 36~41

Gel Documentation Systems WiseDoc� 38~41UV Transilluminators WiseUV � 37

Freezers WiseCryo� 117~129Lab Freezers 119Ultra Low Temperature Freezer WiseCryo� 120~129

Upright Type 122~126Chest Type 127Personal Type 128, 129

Furnaces WiseTherm� 42~44Heating Mantles WiseTherm� 50~63

Beaker Heating Mantles 56, 57Digital Controller for Heating Mantles 62, 63Heating Tapes 63Multi Heating Mantles 61Reaction Vessel Heating Mantles 58~60Spherical Flask Heating Mantles 52~55

Homogenizers WiseTis� 64~68Hotplates WiseTherm� 70~73Hotplate Stirrers WiseStir � 74~80

Multi-Hotplate Stirrer 80Round-plate Hotplate Stirrer 75, 78, 79Square-plate Hotplate Stirrer 74, 76, 77

Incubators WiseCube� 81~104

6

Environmental(Temp./Humidity) Chambers 88~91Gravity/Natural-Flow, Incubators 84, 85Horizontal/Forced-Flow, Incubators 82, 83Low Temperature(BOD) Incubators 96, 97Multi-Room Incubators 86, 87Plant Growth / Environmental Chambers 92~95Shaking Incubators 98~103

Jar Tester for Flocculation Test WiseStir� 159Mill - Ball Mills WiseMix� 104Ovens WiseVen� 105~116

Gravity / Natural-Flow Ovens 110, 111Hi-Clean Air Ovens 106, 107Industrial Ovens 112, 113Mechanical / Forced-Air (Horizontal-flow) 108, 109Vacuum Ovens 114, 115Vacuum Pumps 116

Refrigerators WiseCryo� 117~129Cold Lab Chambers WiseCube� 118Lab Freezers 119Ultra Low Temperature Freezer WiseCryo� 120~129

Upright Type 122~126Chest Type 127Personal Type 128, 129

Rockers WiseMix� 131Rotators WiseMix� 132Shakers WiseShake� 134~137

Orbital Shakers 134, 135Reciprocating Shakers 136, 137

Stirrers, Magnetic WiseStir� 138~148Stirring only 139~141With Heating (Hotplate Stirrer) 74~80/142~148

Stirrers, Overhead WiseStir� 149~158High - Speed Models 150~152High - Torque Models 153~1556-Paddle Stirrer / Jar Tester 159Accessories 156, 157Selection Guide 158

Ultrasonic Cleaners WiseClean� 160~162UV Transilluminators WiseUV� 37Validation Service (IQ,OQ & PQ) 168Vortex Mixer WiseMix� 133

Product Lines 163~167Certificates 171

7www.witeg.de

●● Steam Sterilizers Digital Fuzzy-Controlled Autoclaves.

- Complete Safety Pressure Mechanism.

- Strong and Safety Screw Handle Door.

- Special Steam Condensing Mechanism for User Safety.

WAC-60

▶▶Steam Sterilizer Digital Fuzzy-Controlled Autoclave

WiseClave��

AutoclavesAutoclaves

8

www.witeg.de 9

10

Autoclaves, Steam Sterilizer Au

SpecificationModel WAC-47 WAC-60 WAC-80

Controller Digital Fuzzy-Control System (Fully Automatic)

Dimension(w××d××h)

Inner (mm) Φ300×h670 Φ350×h650 Φ400×h650

Outer (mm) 680×470×880 680×470×900 780×580×900

Dimension of Basket Φ 270×h 250 Φ 320×h 250 Φ 370×h 250

Heater 2 kW 3 kW 2 kW ×2

Capacity 47 Lit. 60 Lit. 80 Lit.

Temp.Range Ambient 5 ℃ to 132 ℃

Accuracy ±0,5 ℃ at 121 ℃

Sterilization mode Liquid or Solid mode

Display Digital LCD Display with Back-Light Function

Timer 99 hr 59 min 59 sec

Pressure 1,2 Kgf / cm2 at 121 ℃, 2,0 Kgf / cm2 at 132 ℃

Gauge 0 ~ 3 kgf / cm2

MaterialPressure Vessel Stainless Steel (＃304)

External Powder Coated Steel

Door Locking One Touch Pressure Handle Type

Safety Device

Over Temp., Over Pressure and Over Current ProtectorElectronic Door Lock Sensing System

Steam Condensing SystemAlarm (Error Status)

Basket 2 ea of Wire Baskets Included

Others CE-MDD (Medical Device Directive)

Packing Dimension(w××d××h) (mm) 800×700×1.280 940×800×1.350

Gross Weight 116 kg 171 kg

Power Consumption 2 kW 3 kW 4 kW

Power plug type Hybrid E+F 3~ 16A CEE

Power Supply� AC 230 V, 50 / 60 Hz 3~, AC 230 V, 50 / 60 Hz

Digital Fuzzy-Controlled Autoclave (WAC-60)

** OOtthheerr SSppeecciiffiiccaattiioonnss aarree aavvaaiillaabbllee uuppoonn CCuussttoommeerr’ss RReeqquueesstt..

““witeg””WiseClave��WAC Steam Sterilizers, Digital Fuzzy-controlled Autoclaveswith Steam Condensing Mechanism, 2×Wire Basket, up to 132℃, Max.2 Kgf/cm2,47- /60- /80- Lit.

Strong and Safety-Screw Handle DoorStrong and Safety-Screw Handle Door

Digital Fuzzy Controller

Manual VentilationValve

Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System

Steam Condensing Mechanism &Complete Safety Pressure Mechanism

■■ Special Steam Condensing Mechanism■■ Patented Jog-Shuttle Control System■■“CE-MDD (CE 0470-Medical Device Directive)

Application & Features� Ideal for Biotechnology, Clinical, Environmental, Medical and Food Industry.� Innovative Easy-to-Use Digital Fuzzy Controller. � Top-loading type Sterilizer for Easy Loading of Large Working Volume.� Casters equipped for Excellent Mobility. � Digital LCD Display with Back-Light Function.� Digital Timer Function -‘Delay Time’and ‘Operation Time’can be Controlled.� Solid / Liquid Mode can be chosen considering a Sample Phase.� Strong and Safety Screw Handle Door. � Complete Safety Pressure Mechanism.� Over-Temperature/-Pressure/-Current protection, Sensor Error Detection, Automatic Over

Pressure Release Valve Ensure User Safety.� Electronic Door Lock Sensing System for User Safety.� Special Steam Condensing Mechanism-/ Heat-Protective Lid Cover for User Safety.� Patented Jog-Shuttle Control System.�“CE-MDD (CE 0470 -Medical Device Directive).

Patented Control System(No. 10-0554098)

1 or 2 Mode Buttons + Jog Shuttle Switch

Reeaalliizzee ““Eaassyy ttoo Ussee””

0470

<Continued on Next page>

witeg Labortechnik GmbH

www.witeg.de 11

AuAutoclaves, Steam Sterilizer

Stainless SteelBottom Perforated Basket

: Option

Stainless SteelWire Basket

: Spare

Ordering Information

DH.WAC01047� Autoclave, WAC-47, 47 Lit.DH.WAC01060� Autoclave, WAC-60, 60 Lit.DH.WAC01080� Autoclave, WAC-80, 80 Lit.

�2×Wire basket Included

Spare AccessoriesDH.WAC10047 Wire Basket, Stainless Steel, WAC10047,

Φ 270×h 250 mm, for 47 Lit.DH.WAC10060 Wire Basket, Stainless Steel, WAC10060,

Φ 320×h 250 mm, for 60 Lit.DH.WAC10080 Wire Basket, Stainless Steel, WAC10080,

Φ 370×h 250 mm, for 80 Lit.

Optional AccessoriesDH.WAC20047 Perforated Basket, Stainless Steel, WAC20047,

Φ 270×h 250 mm, for 47 Lit.DH.WAC20060 Perforated Basket, Stainless Steel, WAC20060,

Φ 320×h 250 mm, for 60 Lit.DH.WAC20080 Perforated Basket, Stainless Steel, WAC20080,

Φ 370×h 250 mm, for 80 Lit.

Validation (IQ, OQ & PQ) ServiceDH.WAC30047 Validation Service(IQ, OQ & PQ), ACV47, for WAC-47DH.WAC30060 Validation Service(IQ, OQ & PQ), ACV60, for WAC-60DH.WAC30080 Validation Service(IQ, OQ & PQ), ACV80, for WAC-80

<Continued from...““witeg””WiseClave��WAC Steam Sterilizers, Digital Fuzzy-controlled Autoclaves>

PPoowweerreedd bbyy FFuuzzzzyy CCoonnttrrooll SSyysstteemm

●● General Purpose Water Baths ●● Circulation Water Baths ●● Extraction Water Baths●● Multi- Chamber Water Baths●● High Temperature Oil Baths●● High Temperature Bath Circulators●● Refrigerated Bath Circulators●● Cold Trap Baths●● Shaking Water Baths●● Viscosity Water Baths

- Digital Fuzzy Controller Implementing Maximum Temperature Accuracy.

- Stainless Steel Bath for Superior Durability & High Thermal Efficiency.

WVB-30

▶▶Refrigerated Bath Circulators

▶▶High Temperature Bath Circulators

▶▶General Purpose Water Bath

▶▶Viscosity Water Bath

WB-11

WiseBath��& WiseCircu��

BathsBaths

WCH-12

WCH-8

WCR-P8WCR-P12

12

www.witeg.de 13

BaBaths, General Purpose

■■ Digital Fuzzy Controller Implementing Maximum Temp. Accuracy■■ Patented Jog-Shuttle Control System and Digital LCD Display

with Back-Light Function■■ CE Certified

Application & Features� Ideal for Biotechnology, Clinical, Environmental, Medical, Petroleum, Food Industry,

Pharmaceutical and Industrial Applications.�Digital Fuzzy Controller Implementing Maximum Temperature Accuracy.�User's Self-Compensation Function to Control Difference Between Real Temperature and

Indicated Temperature. (±10,0 ℃)�Stainless Steel Bath for Superior Durability & High Thermal Efficiency.�Stainless Steel Lid prevents Evaporation and keeps Constant Temperature.�Over Temperature & Over Current Protection, Sensor Error Detection.�Digital Timer Function(99 hr 59 min) :‘Delay Time’and ‘Operation Time’can be Controlled.�Storage Function for the Set Values of Temperature and Timer.�Alarm Function : Error Status and Timer-end.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.

Model WB - 6 WB - 11 WB - 22


Bath (mm) 300×155×150 302×240×150 500×295×150

External (mm) 325×180×260 325×265×260 535×330×260

Heater 800 W 1 kW 2 kW


Temp.

Range Ambient ＋5 ℃~ 100 ℃

Accuracy ± 0,1 ℃

Uniformity ± 1,0 ℃

Sensor PT100

Controller Digital Fuzzy Controller with Jog - Shuttle Switch (Turn＋Push)


Timer 99hr 59min (Delay & Continuous Function Included)

Safety Device Over Temp. and Over Current Protector, Sensor Error Detector

MaterialInternal Stainless Steel (＃304)


Lid Stainless Steel Flat Lid (included), Dome Lid (optional)

Drain None Included

Others

CE CertifiedStorage Function (Temp.& Timer)

Locking Mode (Jog-Shuttle Input Disabled)User Self - Compensation Function

Alarm (Error Status and Timer - end)

Packing Dimension(w××d××h) (mm) 350×210×310 350×300×310 570×360×310

Gross Weight 8 kg 10 kg 14 kg

Power Consumption 800 W 1 kW 2 kW

Power plug type Hybrid E+F

Power Supply� AC 230 V, 50 / 60 Hz


Specification

Digtal Precise Water Bath (WB-11)

““witeg””WiseBath��WB Digital Precise Water Bath, 6-/11-/22- Lit.with Digital Fuzzy Control System & Stainless Steel Flat Lid, Back Light LCD, up to100 ℃, ±0,1 ℃

Back Light LCD






witeg Labortechnik GmbH14

Baths, General Purpose Ba


DH.WB000106� Water Bath, WB-6 , 6 Lit.DH.WB000111� Water Bath, WB-11, 11 Lit.DH.WB000122� Water Bath, WB-22, 22 Lit.

�1×Stainless Steel Flat Lid Included

Spare AccessoriesDH.WB010106 Flat lid, Stainless Steel, BF106, for 6 Lit., w 325×d 176 mmDH.WB010111 Flat lid, Stainless Steel, BF111, for 11 Lit., w 325×d 265 mmDH.WB010122 Flat lid, Stainless Steel, BF122, for 22 Lit., w 530×d 325 mm

Optional AccessoriesDH.WB010206 Dome Lid, Stainless Steel, BD206, for 6 Lit.,

w 324×d 176×h 100 mmDH.WB010211 Dome Lid, Stainless Steel, BD211, for 11 Lit.,


w 533×d 328×h 100 mm

DH.WB020106 Rack, Test tube, 36ea of Φ 17 mm Hole, BTH106, for 6 Lit., SUS, w 220×d 125×h 78,5 mm


DH.WB020111 Rack, Test tube, 63ea of Φ 17 mm Hole, BTH111, for 11/22 Lit., SUS, w 220×d 205×h 78,5 mm

DH.WB020211 Rack, Test tube, 25ea of Φ 32 mm Hole, BTH211, for 11/22 Lit., SUS, w 220×d 205×h 78,5 mm

DH.WB030106 Lid with Concentric Ring Cover Sets 2ea, Stainless Steel, BFC106, for 6 Lit., 330×182×20 mm



Validation (IQ, OQ & PQ) ServiceDH.WB040106 Validation Service(IQ, OQ & PQ), BV106, for WB-6. DH.WB040111 Validation Service(IQ, OQ & PQ), BV111, for WB-11. DH.WB040122 Validation Service(IQ, OQ & PQ), BV122, for WB-22.

Dome Lid (Optional)Flat Lid (Included)

Lid with Concentric RingCover Sets for 11Lit.

(BFC111)

Lid with Concentric RingCover Sets for 6Lit. (BFC106)

Test Tube RackLid with Concentric RingCover Sets for 22Lit. (BFC122)

<Continued from...““witeg””WiseBath��WB Digital Precise Water Bath>

※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ttuubbeess iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 222244--222277..

www.witeg.de 15

BaBaths, Circulation

Digtal Precise Circulation Water Bath (WCB-22)


Flat Lid

Powerful Circulation Pump assures Temp. Uniformity. for both Internal and External Circulation





““witeg””WiseCircu��WCB Digital Precise Circulation Water Bath, 6-/11-/22- Lit.with Digital Fuzzy Control System & Stainless Steel Flat Lid, Back Light LCD, up to100 ℃,±0,1 ℃, 5 Lit./min

■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ Patented Jog-Shuttle Control System and Digital LCD Display with

Back-Light Function■■ CE Certified

Application & Features� Ideal for Biotechnology, Clinical, Environmental, Medical, Petroleum, Food Industry,

Pharmaceutical and Industrial Applications.� Innovative Easy-to-Use Digital Fuzzy Controller.�Digital Timer Function :‘Delay Time’and ‘Operation Time’can be Contolled.�Warning and Automatic Stop Function in case of Liquid Shortage.�User's Self-Compensation Function to Control Difference between Real Temp.

and Indicated Temp. (±10,0 ℃)�Powerful Circulation Pump Assures Temp. Uniformity.: Internal and External Circulation. �Stainless Steel Bath(＃304) for Superior Durability & High Thermal Efficiency.�Stainless Steel Lid Prevents Evaporation and keeps Constant Temperature. �Connection with Evaporators and Viscometers is applicable.�Over Temperature & Over Current Protection, Sensor Error & Low Level Detection.�Storage function for the Set Values of Temperature and Time.� Alarm function : Error Status and Timer-end.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.

SpecificationModel WCB- 6 WCB - 11 WCB - 22


Bath (mm) 300×155×150 302×240×150 500×295×150

External (mm) 330×185×385 335×275×385 540×335×410

Heater 800 W 1 kW 2 kW


Temp.

Range Ambient＋5 ℃~ 100 ℃

Accuracy ±0,1 ℃

Uniformity ±0,2 ℃

Sensor PT100

Pump 5 Lit. / min (Internal / External)

Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn＋Push)


Timer 99hr 59min (Delay & Continuous function included)

Safety Device Over Temp. and Over Current Protector, Sensor Error and Low Level Detector



Lid Stainless Steel Flat Lid included

Drain None Included

Nozzle i.d. 7 mm o.d. 11 mm (i.d. 9 mm o.d. 12 mm silicon tube connected for inner circulation)

Others

CE CertifiedStorage Function (Temp.& Timer)

Locking Mode (Jog-Shuttle Input disabled)User Self - compensation function


Packing Dimension(w××d××h) (mm)

350×210×410 360×300×420 580×380×470


Power Consumption 800 W 1 kW 2 kW






Baths, CirculationBa

Efficient Use of Bathwith Level-Sensor


DH.WCB00106� Circulation Water Bath, WCB-6 , 6 Lit.DH.WCB00111� Circulation Water Bath, WCB-11, 11 Lit.DH.WCB00122� Circulation Water Bath, WCB-22, 22 Lit.

�1×Stainless Flat Steel Lid Included

Spare AccessoriesDH.WCB10106 Flat Lid, Stainless Steel, CBF106, for 6 Lit., w 134×d 180 mmDH.WCB10111 Flat Lid, Stainless Steel, CBF111, for 11 Lit., w 186×d 273 mmDH.WCB10122 Flat Lid, Stainless Steel, CBF122, for 22 Lit., w 391×d 333 mm

Optional AccessoriesDH.WCB20106 Dome Lid, Stainless Steel, CBD106, for 6 Lit.,

w 132×d 182×h 121 mm DH.WCB20111 Dome Lid, Stainless Steel, CBD111, for 11 Lit.,

w 184×d 274×h 121 mm DH.WCB20122 Dome Lid, Stainless Steel, CBD122, for 22 Lit.,

w 389×d 334×h 121 mm

Validation (IQ, OQ & PQ) ServiceDH.WCB30106 Validation Service(IQ, OQ & PQ), CBV106, for WCB-6DH.WCB30111 Validation Service(IQ, OQ & PQ), CBV111, for WCB-11DH.WCB30122 Validation Service(IQ, OQ & PQ), CBV122, for WCB-12

Dome Lid (Optional)

<Continued from...““witeg””WiseCircu��WCB Digital Precise Circulation Water Bath>

www.witeg.de 17

BaBaths, Circulation

Model WCB - 11H WCB - 22H

Dimension (w××d××h) (mm) 130×165×320

Heater 1 kW 2 kW

Capacity 11 Lit. 22 Lit.

Temp.Range Ambient＋5 ℃ ~ 100 ℃

Sensor PT100

Pump 5 Lit. / min

Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn＋Push)


Timer 99 hr 59 min (Delay & Continuous Function included)

Safety Device Over Temp. and Over Current Protector, Sensor Error and Low Level Detector

Others

CE CertifiedPL(Product Liability) Insurance

Storage Function (Temp.& Timer)Locking Mode (Jog-Shuttle Input disabled)

User Self - Compensation FunctionAlarm (Error Status and Timer - end)

Packing Dimension(w××d××h) (mm) 400×280×200


Power Consumption 1 kW 2 kW




““witeg””WiseCircu��WCB-H Digital Precise Immersion Circulator Head, 11-/22- Lit.Digital Fuzzy Control System, Back Light LCD, up to 100 ℃, 5 Lit./min

■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ Warning and Automatic Stop Function in case of Liquid Shortage■■ Patented Jog-Shuttle Control System and Digital LCD Display with


Application & Features� Innovative Easy-to-Use Digital Fuzzy Controller.�Digital Timer Function : ‘Delay Time’ and ‘Operation Time’ can be Controlled.�Warning and Automatic Stop Function in case of Liquid Shortage.�User’s Self-Compensation Function to Control Difference between Real Temp.

and Indicated Temp. (±10,0 ℃)�Over Temperature & Over Current Protection, Sensor Error & Low Level Detection.�Storage Function for the Set Values of Temperature and Timer.�Alarm Function : Error Status and Timer-end.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.

Specification





320mm

130mm115mm

Ordering InformationDH.WCB10011 Immersion Circulator Head, WCB-11HDH.WCB10022 Immersion Circulator Head, WCB-22H

Digtal Precise Immersion Circulator Head (WCB-11H)


Digtal Precise ImmersionCirculator Head


Baths, ExtractionBa

Model WEB - 4 WEB - 6 WEB - 8

No. of Extraction Holes 4 Places 6 Places 8 (4×2) Places

Top Opening Dia. (mm) Φ 110 Φ 110 Φ 110


Bath (mm) 610×160×160 910×140×160 610×290×160

External (mm) 720×245×275 975×245×275 720×375×275

Heater 1,4 kW 1,8 kW 1,4 kW×2

Temp.

Range Ambient +5 ℃ to 100 ℃

Accuracy ±0,2 ℃


Sensor PT100

Material

Internal Stainless Steel (＃304)


Stand Stainless Steel Frame

Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)


Timer 99hr 59min (Delay & Continuous function included)

Lid Concentric Ring Cover included

Drain Available

Safety Device Over Temp. and Over Current Protector,Sensor Error Detector, Leakage Breaker

Others

CE-CertifiedStorage Function (Temp.& Timer)

Locking Mode (Jog-Shuttle Input disabled)User Self - Compensation Function



710×310×300 1.030×320×370 880×420×300


Power Consumption 1,4 kW 1,8 kW 2,8 kW



Specification

Multi-purpose Extraction Water Bath (WEB-4) With Holding Frame


““witeg””WiseBath��WEB Multi-purpose Extraction Water Bath, 4- /6- /8- Placeswith Digital Fuzzy Control System, Back Light LCD, and Holding Frame, up to 100 ℃, ± 0,2 ℃

■■ Concentric Ring Cover Sets make Effective Steaming Work■■ Ideal for Gentle Extraction, Soxhlet Extraction and Determination of COD■■ Digital Fuzzy Controller Implementing Maximum Temp. Accuracy■■ Patented Jog-Shuttle Control System and Digital LCD Display with


Application & Features� Ideal for Gentle Extraction,Soxhlet Extraction and Determination of COD.�Concentric Ring Cover Sets make Effective Steaming Work.� 4, 6, 8 Extraction Places are available.�Digital Fuzzy Controller Implementing Maximum Temp. Accuracy.�User's Self-compensation Function to Control Difference between Real Temperature and

Indicated Temperature. (±10,0 ℃)�High Quality Stainless Steel Bath and Holding Frame for Superior Durability.�Over Temperature & Over Current Protection, Sensor Error Detection and Leakage Breaking.�Digital Timer Function(99 hr 59 min) : ‘Delay Time’and ‘Operation Time’can be Controlled.�Storage Function for the Set Values of Temperature and Timer.�Alarm Function : Error Status and Timer-end. � Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.




1.000 mm


www.witeg.de 19

BaBaths, Extraction


Concentric Ring Cover Sets


DH.WEB01004� Extraction Water Bath, WEB-4, 4×Places, 4×Open-Top, Φ 110 mmDH.WEB01006� Extraction Water Bath, WEB-6, 6×Places, 6×Open-Top, Φ 110 mmDH.WEB01008� Extraction Water Bath, WEB-8, 8(4×2)×Places, 8×Open-Top, Φ 110 mm

�Concentric Ring Cover Sets and Holding Frame Included

Spare AccessoriesDH.WEB11000 Concentric Ring Cover Sets, Stainless Steel,

EBC100, for all WEB modelsDH.WEB21004 Holding Frame Set, EBF100, for WEB-4,

2 ea×1 m Pole & 2 ea×700 mm PoleDH.WEB21006 Holding Frame Set, EBF200, for WEB-6

2 ea×1 m Pole & 2 ea×1.020 mm PoleDH.WEB21008 Holding Frame Set, EBF300, for WEB-8

4 ea×1 m Pole & 4 ea×740 mm Pole

Validation (IQ, OQ & PQ) ServiceDH.WEB30004 Validation Service(IQ, OQ & PQ), EBV004, for WEB-4DH.WEB30006 Validation Service(IQ, OQ & PQ), EBV006, for WEB-6DH.WEB30008 Validation Service(IQ, OQ & PQ), EBV008, for WEB-8

Back Light LCD

<Continued from...““witeg””WiseBath��WEB Multi-purpose Extraction Water Bath>



Baths, Multi-ChamberBa

Model WMB-306 WMB-311


Bath (mm) (300×155×150)×3 Baths (300×240×150)×3 Baths

External (mm) 655×450×360 840×450×360

Capacity 6 Lit×3 Baths 11 Lit.×3 Baths

Heater 800 W×3 Baths 1 kW×3 Baths

Temp.


Accuracy ± 0,1 ℃

Uniformity ± 1,0 ℃

Sensor PT100




Safety Device Over Temp. and Over Current Protector, Sensor Error Detector, Leakage Breaker




Drain Available

Others





880×470×380


Power Consumption 2,4 kW 3 kW




““witeg””WiseBath��WMB Digital Multi -Chamber Water Bath, 3×6 Lit. /3×11 Lit.with 3 Chambers & 3×Stainless Steel Flat Lid, Independent Digital Fuzzy Control System, up to 100 ℃, ± 0,1℃

Specification




Independent Digital Fuzzy Control System

Digtal Multi-Chamber Water Bath (WMB-306)

Individual Control of each Chamber

■■ Individual Control of each Chamber - Temperature and Time■■ Digital Fuzzy Controller Implementing Maximum Temp. Accuracy■■ Patented Jog-Shuttle Control System and Digital LCD Display with


Application & Features� Ideal for Biotechnology, Clinical, Environmental, Medical, Petroleum, Pharmaceutical and

Industrial Applications.�Temp. and Time in each Chamber are Controlled independently.�Digital Fuzzy Controller Implementing Maximum Temp. Accuracy.�User's Self-Compensation Function to Control Difference between Real Temperature

and Indicated Temperature.�Stainless Steel Bath for Superior Durability & High Thermal Efficiency.�Stainless Steel Lid Prevents Evaporation and keeps Constant Temperature.�Over Temperature & Over Current Protection, Sensor Error Detection and Leakage Breaking.�Storage Function for the Set Values of Temperature and Timer.�Alarm Function : Error Status and Timer-end. � Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.


www.witeg.de 21

BaBaths, Multi-Chamber


DH.WMB01306� Multi-Chamber Water Bath, WMB-306, 3× 6 Lit. BathsDH.WMB01311� Multi-Chamber Water Bath, WMB-311, 3×11 Lit. Baths


Spare AccessoriesDH.WB010106 Flat Lid, Stainless Steel, BF106, for 6 Lit.,

w 176×d 325 mmDH.WB010111 Flat Lid, Stainless Steel, BF111, for 11 Lit.,

w 265×d 325 mm

Optional AccessoriesDH.WB010206 Dome Lid, Stainless Steel, BD206, for 6 Lit.,


w 263×d 324×h 100 mm

DH.WB020106 Rack, Test tube, 36 ea of Φ 17 mm Hole, BTH106, for 6 Lit., SUS, w 220×d 125×h 78,5 mm






Validation (IQ, OQ & PQ) ServiceDH.WMB40106 Validation Service(IQ, OQ & PQ), MBV106, for WMB-306 DH.WMB40111 Validation Service(IQ, OQ & PQ), MBV111, for WMB-311




Test Tube Rack

<Continued from...““witeg””WiseBath��WMB Digital Multi -Chamber Water Bath>



Baths, High Temp. OilBa

Specification


Model WHB-6 WHB-11 WHB-22


Bath (mm) 270×180×150 300×250×150 400×300×180

External (mm) 425×305×340 425×375×340 525×425×370


Heater 2 kW 2,5 kW 3 kW

Temp.

Range Ambient + 5 ℃ to 250 ℃

Accuracy ±1,5 ℃


Sensor PT 100

Material



Insulation Ceramic Fiber 50 mm Thickness




Lid Stainless Steel Flat Lid Included

Drain Valve Available

Safety Device Over Temp. “Cut-Off”

Others





470×400×500 600×490×500


Power Consumption 2 kW 2,5 kW 3 kW



Digital High Temperature Oil Bath (WHB-11)

““witeg””WiseBath��WHB Digital High Temperature Oil Bath, 6- /11- /22- Lit.Digital Fuzzy Control System, Stainless Steel Flat Lid, Back Light LCD, up to 250 ℃, ±1,5 ℃

■■ Corrosion Resistant Stainless Steel Bath of 1,2 mm Thickness and CeramicFiber Insulator of 50 mm Thickness are used for High Temperature

■■ Digital Fuzzy Controller Implementing Maximum Temp. Accuracy■■ Patented Jog-Shuttle Control System and Digital LCD Display with


Application & Features�Digital Fuzzy Controller Implementing Maximum Temperature Accuracy.�Digital Timer Function(99 hr 59 min) :‘Delay Time’and ‘Operation Time’can be controlled.�User's Self-Compensation Function to Control Difference between Real Temperature

and Indicated Temperature.�Corrosion Resistant Stainless Steel Bath and of 1,2 mm Thickness and Ceramic Fiber Insulator of

50 mm Thickness are used for High Temperature. �Over Temperature and Over Current Protection, Sensor Error Detection.�Storage Function for the Set Values of Temperature and Timer.�Alarm Function : Error Status and Timer-end. � Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.




Patented Jog-ShuttleControl System

Back Light LCD



www.witeg.de 23

BaBaths, High Temp. Oil

Ordering InformationDH.WHB00106� High Temp. Oil Bath, WHB-6 , 6 Lit.DH.WHB00111� High Temp. Oil Bath, WHB-11, 11 Lit.DH.WHB00122� High Temp. Oil Bath, WHB-22, 22 Lit.


Spare AccessoriesDH.WHB10106 Flat Lid, Stainless Steel, HBF106, for 6 Lit., w 306×d 216 mmDH.WHB10111 Flat Lid, Stainless Steel, HBF111, for 11 Lit., w 336×d 286 mmDH.WHB10122 Flat Lid, Stainless Steel, HBF122, for 22 Lit., w 436×d 336 mm

Optional AccessoriesDH.WHB20106 Dome Lid, Stainless Steel, HBD106, for 6 Lit.

w 306×d 216×h 100 mmDH.WHB20111 Dome Lid, Stainless Steel, HBD111, for 11 Lit.

w 336×d 286×h 100 mmDH.WHB20122 Dome Lid, Stainless Steel, HBD122, for 22 Lit.

w 436×d 336×h 100 mm



DH.WB020111 Rack, Test tube, 63ea of Φ 17 mm Hole, BTH111, for 11 / 22 Lit., SUS, w 220×d 205×h 78,5 mm

DH.WB020211 Rack, Test tube, 25ea of Φ32mm Hole, BTH211, for 11 / 22 Lit., SUS, w 220×d 205×h 78,5 mm

DH.WHB030122 Lid with Concentric Ring Cover Sets 4ea, Stainless Steel, HBFC122, for 22 Lit., 539×334×20 mm

Validation (IQ, OQ & PQ) ServiceDH.WHB40106 Validation Service(IQ, OQ & PQ), HBV106, for WHB-6DH.WHB40111 Validation Service(IQ, OQ & PQ), HBV111, for WHB-11DH.WHB40122 Validation Service(IQ, OQ & PQ), HBV122, for WHB-22


Test Tube RackLid with Concentric RingCover Sets for 22Lit.

(HBFC122)

<Continued from...““witeg””WiseBath��WHB Digital High Temperature Oil Bath>



Baths, High-Temp. Bath CirculatorsBa

Model WCH-8 WCH-12 WCH-22 WCH-30


Bath (mm) 180×320×155 250×320×155 340×440×155 340×440×200

External (mm) 440×300×450 440×370×450 560×460×450 560×460×495

Heater 0,8 kW 1,0 kW 2,0 kW 2,0 kW

Capacity 8 Lit 12 Lit. 22 Lit 30 Lit.

Temp.

Range Ambient＋5 ℃ ~ 250 ℃

Accuracy ±0,1 ℃


Sensor PT100

Material



Insulation Ceramic Fiber 50mm Thickness

Pump 15 Lit. / min (Internal / External)



Timer 99 hr 59 min (Delay & Continuous Function)

Safety Device Over Temp. and Over Current Protector,Sensor Error Detector


Nozzle i.d. 6 mm×o.d. 10 mm(i.d. 7 mm o.d.11 mm Silcon tube Connected for inner Circulation)

Drain Valve Included

Others


Locking Mode (Jog-Shuttle Input Disabled)User Self - compensation Function



470×400×500 470×400×500 600×490×500 600×490×500

Gross Weight 19 kg 21 kg 23 kg 37 kg

Power Consumption 800 W 1 kW 2 kW 2 kW


Power Supply* AC 230 V, 50 / 60 Hz

““witeg””WiseCircu��WCH High Temperature Bath Circulator, 8- /12- /22- /30- Lit.Digital Fuzzy Control, Powerful Circulation Pump, Back Light LCD, up to 250 ℃, ±0,1 ℃

SpecificationHigh Temperature Bath Circulators

■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ Powerful Circulation Pump ensures Temp. Uniformity

: Internal and External Circulation ■■ Patented Jog-Shuttle Control System■■ CE Certified

Application & Features� Innovative Easy-to-Use Digital Fuzzy Controller.�Digital Timer Function : ‘Delay Time’and‘Operation Time’can be controlled.�Stainless Steel Bath and Lid for Superior Durability and High Thermal Efficiency.�Powerful Circulation Pump Assures Temp. Uniformity. : Internal and External Circulation. �User’s Self-Compensation Function to Control Difference between Real Temp. and Indicated Temp. �Over Temperature-/Over Current-/Low Level-Protection, Sensor Error.�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.


WCH-8

WCH-12


Flat Lid





www.witeg.de 25

BaBaths, High-Temp. Bath Circulators

Efficient Use of Bathwith Level Sensor

Innovative Digital FuzzyController

Dome Lid (Optional)


Ambient +5 ℃℃~250 ℃℃ CirculatorsDH.WCH00108� High Temp. Circulator, WCH-8 , 8 Lit.DH.WCH00112� High Temp. Circulator, WCH-12, 12 Lit.DH.WCH00122� High Temp. Circulator, WCH-22, 22 Lit.DH.WCH00130� High Temp. Circulator, WCH-30, 30 Lit.


Spare AccessoriesDH.WCH10108 Flat Lid, Stainless Steel, CHBF108, for 8 Lit., w 288×d 158 mmDH.WCH10112 Flat Lid, Stainless Steel, CHBF112, for 12 Lit., w 358×d 158 mmDH.WCH10122 Flat Lid, Stainless Steel, CHBF122, for 22 Lit., w 448×d 278 mmDH.WCH10130 Flat Lid, Stainless Steel, CHBF130, for 30 Lit., w 448×d 278 mm

Optional AccessoriesDH.WCH20108 Dome Lid, Stainless Steel, CHBD108, for 8 Lit.,

w 288×d 158×h 121 mmDH.WCH20112 Dome Lid, Stainless Steel, CHBD112, for 12 Lit.,



w 448×d 278×h 121 mm

Validation (IQ, OQ & PQ) ServiceDH.WCH30108 Validation Service(IQ, OQ & PQ), CHBV108, for 8 Lit. DH.WCH30112 Validation Service(IQ, OQ & PQ), CHBV112, for 12 Lit.DH.WCH30122 Validation Service(IQ, OQ & PQ), CHBV122, for 22 Lit.DH.WCH30130 Validation Service(IQ, OQ & PQ), CHBV130, for 30 Lit.

<Continued from...““witeg””WiseCircu��WCH High Temperature Bath Circulator >


Baths, Refrigerated Bath CirculatorsBa

■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ RS232C Interface for Remote Monitoring and Controlling with PC■■ CFC-free (404A) Refrigeration System■■ Patented Jog-Shuttle Control System and Digital LCD Display with


Application & Features� Ideal for Direct Immersion of Samples or External Circulating System in the field of

Biotechnology and Laboratories.� Innovative Easy-to-Use Digital Fuzzy Controller.�RS232C Interface for Remote Monitoring and Controlling with PC.�Digital Timer Function :‘Delay Time’and‘Operation Time’can be Controlled.�Stainless Steel Bath(＃304) for Superior Durability & High Thermal Efficiency.�Powerful Circulation Pump ensures Temp. Uniformity : Internal and External Circulation. �Connection with Evaporator or Viscometer is applicable.�User’s Self-compensation Function to Control Difference between Real Temperature and

Indicated Temperature. (±10,0 ℃) �Warning and Auto-Stop Function in case of Liquid Shortage.�Auto-controlled Refrigeration System for Compressor Protection and Power Saving.�Over Temperature & Over Current Protection, Sensor Error & Low Level Detection, Leakage Breaking.�CFC-free (404A) Refrigeration System. �Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.

Digital Precision Refrigerated Bath Circulators (WCR-P6 & WCR-P12 )

““witeg””WiseCircu��WCR Digital Precise Refrigerated Bath Circulator Digital Fuzzy Control, Back Light LCD, CFC-free Refrigeration, 6- /8- /12- /22- /30- Lit.,－－20 ℃~100 ℃,±0,1 ℃






CFC-free (404A) Refrigeration System



Model WCR - P6 WCR - P8 WCR-P12 WCR-P22 WCR-P30


Effective Space (mm) 180×83×150 180×143×150 250×150×150 350×250×150 350×250×230

Bath (mm) 180×250×150 180×310×150 250×320×150 350×420×150 350×420×250External (mm) 262×468×630 262×468×630 372×460×750 455×545×770 455×545×845

Capacity 6 Lit. 8 Lit. 12 Lit. 22 Lit. 30 Lit.Heater 800 W 1 kW 1,5 kW 2 kW 2,2 kW

CoolingCapacity

10 ℃℃ 1,5 kW 1,5 kW 1,5 kW 2,8 kW 3,3 kW0 ℃℃ 1,2 kW 1,2 kW 1,2 kW 2,1 kW 2,6 kW

－－20 ℃℃ 490 W 490 W 490 W 910 W 1,2 kWRefrigerator 245 W 245 W 245 W 552 W 643 W

Temp.

Range －20 ℃ ~ 100 ℃Accuracy ±0,1 ℃Uniformity ±0,2 ℃ at －10 ℃Sensor PT100

Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)Display Digital LCD Display with Back-Light FunctionTimer 99hr 59min (Delay & Continuous Function Included)

MaterialInternal Stainless Steel (＃304)External Powder Coated SteelInsulation Polystyrene (20 mm)

Pump 15 Lit. / min (Internal / External)Compressor Control Intelligent Control of Refrigerator for preventing Overload of CompressorRefrigerant CFC -Free(404A) Refrigeration System

Safety Device Over Temp. and Over Current Protector,

Sensor Error and Low Level Detector, Leakage BreakerDrain IncludedLid Stainless Steel Flat Lid includedNozzle i.d. 10 mm×o.d. 12 mm(i.d. 10 mm o.d.18 mm Silcon tube Connected for inner Circulation)

Others

CE Certified, Storage Function (Temp.& Timer)Locking Mode (Jog-Shuttle Input Disabled)

User Self - Compensation FunctionAlarm (Error Status and Timer - end)

Packing Dimension(w××d××h) (mm) 530×370×700 600×500×950 620×580×960 640×600×1.040

Gross Weight 50 kg 54 kg 65 kg 76 kg 83 kg

Power Consumption 1,4 kW 1,6 kW 2,1 kW 3,4 kW 3,8 kWPower plug type Hybrid E+F 3~ 16A CEE

Power Supply* AC 230 V, 50 / 60 Hz 3~, AC 230 V, 50 / 60 Hz

Specification


www.witeg.de 27

BaBaths, Refrigerated Bath Circulators


－20 ℃℃ ~ +100 ℃℃ CirculatorsDH.WCR00206� Refrigerated Circulator, －20 ℃, WCR-P6, 6 Lit.DH.WCR00208� Refrigerated Circulator, －20 ℃, WCR-P8, 8 Lit.DH.WCR00212� Refrigerated Circulator, －20 ℃, WCR-P12, 12 Lit.DH.WCR00222� Refrigerated Circulator, －20 ℃, WCR-P22, 22 Lit.DH.WCR00230� Refrigerated Circulator, －20 ℃, WCR-P30, 30 Lit.


Spare AccessoriesDH.WCR10206 Flat Lid, Stainless Steel, CRBF106, for 6 Lit., w 245×d 98 mmDH.WCR10208 Flat Lid, Stainless Steel, CRBF108, for 8 Lit., w 245×d 158 mmDH.WCR10212 Flat Lid, Stainless Steel, CRBF112, for 12 Lit., w 316×d 165 mmDH.WCR10222 Flat Lid, Stainless Steel, CRBF122, for 22 Lit. / 30Lit., w 416×d 265 mm

Optional AccessoriesDH.WCR20206 Dome Lid, Stainless Steel, CRBD106, for 6 Lit.,

w 245×d 98×h 121 mmDH.WCR20208 Dome Lid, Stainless Steel, CRBD108, for 8 Lit.,


w 316×d 165×h 121 mmDH.WCR20222 Dome Lid, Stainless Steel, CRBD122, for 22 Lit. / 30Lit.,

w 416×d 265×h 121 mm

Validation (IQ, OQ & PQ) ServiceDH.WCR30206 Validation Service(IQ, OQ & PQ), CRBV106, for WCR-P6DH.WCR30208 Validation Service(IQ, OQ & PQ), CRBV108, for WCR-P8DH.WCR30212 Validation Service(IQ, OQ & PQ), CRBV112, for WCR-P12DH.WCR30222 Validation Service(IQ, OQ & PQ), CRBV122, for WCR-P22DH.WCR30230 Validation Service(IQ, OQ & PQ), CRBV130, for WCR-P30

<Continued from...““witeg””WiseCircu��WCR Digital Precise Refrigerated Bath Circulator >

Dome Lid (Optional)

Flat Lid (Included)

WiseRemote�� Remote Control Software - standard delivery

Connection of Temperature Devices with Interface RS232C to a PC Export Recorded Data (Excel Spreadsheet)

Main Screen RS232C Cable & Software


Baths, Ultra Low Refrigerated Bath CirculatorsBa

Specification

■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ CFC-free (404A) Refrigeration System.■■ Patented Jog-Shuttle Control System and Digital LCD Display

with Back-Light Function■■ CE Certified

Application & Features� Ideal for Direct Immersion of Samples or External Circulating System in the Field of

Biotechnology and Laboratories.� Innovative Easy-to-Use Digital Fuzzy Controller.�RS232C Interface for Remote Monitoring and Controlling with PC.�Digital Timer Function :‘Delay Time’and‘Operation Time’can be controlled.�Stainless Steel Bath(＃304) for Superior Durability & High Thermal Efficiency.�Stainless Steel Lid Prevents Evaporation and keeps Constant Temperature. �Powerful Circulation Pump ensures Temp. Uniformity. : Internal and External Circulation. �Connection with Evaporator or Viscometer is applicable.�User’s Self-compensation Function to Control Difference between Real Temperature and

Indicated Temperature. (±10,0 ℃) �Warning and Auto-Stop function in case of Liquid Shortage.�Auto-controlled Refrigeration System for Compressor Protection and Power Saving.�Over Temperature & Over Current Protection, Sensor Error & Low Level Detection, Leakage Breaking.�CFC-free (404A) Refrigeration System. �Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.Ultra Low-Temperature Bath Circulators

(WCL-P12 & WCL-P30 )


““witeg””WiseCircu��WCL Ultra Low-Temperature Refrigerated Bath CirculatorDigital Fuzzy Control, Back Light LCD, CFC-free Refrigeration System, 6- /8- /12- /22- /30- Lit., －－40 ℃~100 ℃,±0,1 ℃




CFC-free (404A) Refrigeration System





Model WCL- P6 WCL- P8 WCL-P12 WCL-P22 WCL-P30


Effective Space (mm) 180×83×150 180×143×150 250×150×150 350×250×150 350×250×230

Bath (mm) 180×250×150 180×310×150 250×320×150 350×420×150 350×420×250External (mm) 372×468×750 372×468×750 372×460×750 455×545×770 455×545×845

Capacity 6 Lit. 8 Lit. 12 Lit. 22 Lit. 30 Lit.Heater 800 W 1 kW 1,5 kW 2 kW 2,2 kW

CoolingCapacity

－－10℃℃ 1,2 kW 1,2 kW 1,2 kW 1,5 kW 3,3 kW－－20℃℃ 770 W 770 W 770 W 930 W 2,6 kW－－40℃℃ 150 W 150 W 150 W 180 W 1,2 kW

Refrigerator 276 W 276 W 368 W 552 W 643 W

Temp.

Range －－40 ℃℃ ~ 100 ℃℃Accuracy ±0,1 ℃℃Uniformity ±0,2 ℃℃ at －20 ℃℃Sensor PT100

Controller Digital Fuzzy Controller with Jog-Shuttle Switch (Turn+Push)Display Digital LCD Display with Back-Light FunctionTimer 99hr 59min (Delay & Continuous Function Included)

MaterialInternal Stainless Steel (＃304)External Powder Coated SteelInsulation Polystyrene (40 mm)

Pump 15 Lit. / min (Internal / External)Compressor Control Intelligent Control of Refrigerator for preventing Overload of CompressorRefrigerant CFC -Free(404A) Refrigeration System

Safety Device Over Temp. and Over Current Protector,Sensor Error and Low Level Detector, Leakage Breaker

Drain IncludedLid Stainless Steel Flat Lid includedNozzle i.d.10 mm×o.d.12 mm(i.d. 10 mm o.d.18 mm Silcon tube Connected for inner Circulation)

Others

CE Certified, Storage Function (Temp.& Timer)Locking Mode (Jog-Shuttle Input Disabled)

User Self - compensation FunctionAlarm (Error Status and Timer - end)

Packing Dimension(w××d××h) (mm) 530×370×700 600×500×950 620×580×960 640×600×1,040

Gross Weight 58 kg 62 kg 66 kg 73 kg 80 kg

Power Consumption 1,5 kW 1,7 kW 2,4 kW 3,4 kW 3,8 kWPower plug type Hybrid E+F 3~ 16A CEE

Power Supply* AC 230 V, 50 / 60 Hz 3~, AC 230 V, 50 / 60 Hz

www.witeg.de 29

BaBaths, Ultra Low Refrigerated Bath Circulators

<Continued from...““witeg””WiseCircu��WCL Ultra Low-Temperature Refrigerated Bath Circulator>


－40 ℃℃~+100 ℃℃ CirculatorsDH.WCL00206� Refrigerated Circulator, －40 ℃, WCL-P6 , 6 Lit.DH.WCL00208� Refrigerated Circulator, －40 ℃, WCL-P8 , 8 Lit.DH.WCL00212� Refrigerated Circulator, －40 ℃, WCL-P12, 12 Lit.DH.WCL00222� Refrigerated Circulator, －40 ℃, WCL-P22, 22 Lit.DH.WCL00230� Refrigerated Circulator, －40 ℃, WCL-P30, 30 Lit.


Spare AccessoriesDH.WCR10206 Flat Lid, Stainless Steel, CRBF106, for 6 Lit., w 245×d 98 mmDH.WCR10208 Flat Lid, Stainless Steel, CRBF108, for 8 Lit., w 245×d 158 mmDH.WCR10212 Flat Lid, Stainless Steel, CRBF112, for 12 Lit., w 316×d 165 mmDH.WCR10222 Flat Lid, Stainless Steel, CRBF122, for 22 Lit. / 30 Lit., w 416×d 265 mm

Optional AccessoriesDH.WCR20206 Dome Lid, Stainless Steel, CRBD106, for 6 Lit.,



w 316×d 165×h 121 mmDH.WCR20222 Dome Lid, Stainless Steel, CRBD122, for 22 Lit. / 30 Lit.,

w 416×d 265×h 121 mm

Validation (IQ, OQ & PQ) ServiceDH.WCL30206 Validation Service(IQ, OQ & PQ), CLBV106, for WCL-P6DH.WCL30208 Validation Service(IQ, OQ & PQ), CLBV108, for WCL-P8DH.WCL30212 Validation Service(IQ, OQ & PQ), CLBV112, for WCL-P12DH.WCL30222 Validation Service(IQ, OQ & PQ), CLBV122, for WCL-P22DH.WCL30230 Validation Service(IQ, OQ & PQ), CLBV130, for WCL-P30

Dome Lid (Optional)

Flat Lid (Included)

WiseRemote�� Remote Control Software - standard delivery

Connection of Temperature Devices with Interface RS232C to a PC Export Recorded Data (Excel Spreadsheet)

Main Screen RS232C Cable & Software


Baths, Cold TrapBa

Model WCT- 40 WCT- 80


Bath (mm) 220×220×210

External (mm) 377×453×705

Capacity 10 Lit.

Type Glass Trap

Temp. Range Down to - 40 ℃ Down to - 80 ℃

Controller PID Controller

Material

Internal Stainless Steel

External Powder Coated Steel, 1,2 t, Doublepaint & Baked

Insulation Polyurethane Foam (20 mm)

Refrigerator 368 W 736 W

Refrigerant 404A

Drain Valve Available

Safety Device Over Current Protector, Sensor Error Detector, Leakage Breaker

Others CE-Certified

Packing Dimension(w××d××h) (mm) 560×500×1.010 680×640×1.130


Power Consumption 900 W 1,8 kW



Specification

Digital Precision Cold Trap Bath (WCT-40)


““witeg””WiseCircu��WCT Digital Precision Cold Trap Bath, --40 ℃ //--80 ℃with Glass-Trap, Digital PID Control System, CFC-free Refrigeration System, 10 Lit.

■■ Ideal for Exceptional Cooling System.■■ Digital PID Controller.■■ CFC-free (404A) Refrigeration System.■■ Patented Jog-Shuttle Control System and Digital LCD Display with


Application & Features� Ideal for Exceptional Cooling System like Collecting Evaporation Vapor or Hazardous

Vapor from Vacuum Line.�Digital PID Controller. �Durable Stainless Steel Bath and Powder Coated Steel.�Over Current Protection, Sensor Error Detection, Leakage Breaking.�CFC-free (404A) Refrigeration System. �Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.




Ordering InformationDH.WCT00140 Cold Trap Bath, WCT-40, 10 Lit., －40 ℃, with Glass Cold TrapDH.WCT00180 Cold Trap Bath, WCT-80, 10 Lit., －80 ℃, with Glass Cold Trap

Spare AccessoriesDH.WCT11000 Cold Trap, CTG1000,

2 ea of DURAN� Borosilicate Glass α3,3 Safety-Pressure Resistant 1,5 bar at 250 ℃, for WCT, Φ 106×h 249 mm �Other specifications are available upon costumers request

Validation (IQ, OQ & PQ) ServiceDH.WCT20140 Validation Service(IQ, OQ & PQ), CTBV106, for WCT-40DH.WCT20180 Validation Service(IQ, OQ & PQ), CTBV108, for WCT-80

※※ RReeccoommmmeennddaattiioonn :: CCoommbbiinnaattiioonn ooff tthhee CCoolldd TTrraapp BBaatthh((WWCCTT))wwiitthh tthhee VVaaccuuuumm OOvveenn((WWOOVV)) aanndd VVaaccuuuumm PPuummpp ((RReeffeerr ttoo ppaaggee 111144~~111166))

Glass Cold Trap

PID Control System


Glass Cold Trap(CTG1000)

www.witeg.de 31

BaBaths, Shaking

SpecificationModel WSB-18 WSB-30 WSB-45


Bath (mm) 300×300×200 500×300×200 600×380×200

External (mm) 563×353×340 763×353×340 863×433×340


Heater 1,4 kW 1,8 kW 2,4 kW

Max.Shaking Capacity(Elermeyer Flask) 250 ml×4 ea 250 ml×8 ea 250 ml×15 ea

Temp.


Accuracy ±0,1 ℃


Sensor PT100


ShakingSpeed 20 to 250 Stroke / min

Stroke 20 mm as Factory DefaultWhen you place your order, 10, 15 and 30mm, you can choose one.


Timer 99 hr 59 min (Delay & Continuous Function Included)



Rack Stainless Steel Spring Rack : Universal-type

Drain Included


Others




Packing Dimension(w××d××h) (mm) 620×420×450 820×420×450 920×500×450


Power Consumption 1,4 kW 1,8 kW 2,4 kW




““witeg””WiseBath��WSB Digital Precise Shaking Water Bath, 18- /30- /45- Lit.Digital Fuzzy Control, Spring Rack, Reciprocating Motion, 20 ~ 250 rpm, to 100 ℃,± 0,1 ℃, up to 2 Lit Flask




Digital Precise Shaking Water Bath (WSB-18)

■■Electronically Controlled Shaking Mechanism Provides QuietReciprocating Motion and Precise Speed Control.

■■Patented Shaking Mechanism : Minimum Noise and Vibration■■Patented Jog-Shuttle Control System and Digital LCD Display with

Back-Light Function■■CE Certified

Application & Features�Stainless Steel Bath for Superior Durability & High Thermal Efficiency.� Innovative Easy-to-Use Digital Fuzzy Controller.�Digital Timer Function :‘Delay Time’and‘Operation Time’can be Controlled.�Electronically Controlled Shaking Mechanism Provides Quiet Reciprocating Motion and

Precise Speed Control. �Universal Stainless Steel Spring Rack Included : for various kind of Flasks and Tubes (up to 2ℓ)�User’s Self-Compensation Function to Control Difference between Real Temperature and

Indicated Temperature. (±10,0 ℃)�Over Temperature & Over Current Protection, Sensor Error Detection.�Patented Shaking Mechanism : Minimum Noise and Vibration. �Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.

Stainless SteelSpring RackStainless SteelSpring Rack

Electronically Controlled Shaking Mechanism




Baths, ShakingBa

Spring Rack (Standard Delivery)

Ordering InformationDH.WSB01018� Shaking Water Bath, WSB-18, 20~250 rpm, 100 ℃, 18 Lit. DH.WSB01030� Shaking Water Bath, WSB-30, 20~250 rpm, 100 ℃, 30 Lit. DH.WSB01045� Shaking Water Bath, WSB-45, 20~250 rpm, 100 ℃, 45 Lit.

�1×Stainless steel Spring Rack Included

Spare AccessoriesDH.WSB51018 Universal Spring Rack, SBR018, for 18 Lit., w 245×d 270×h 110 mm DH.WSB51030 Universal Spring Rack, SBR030, for 30 Lit., w 445×d 270×h 110 mm DH.WSB51045 Universal Spring Rack, SBR045, for 45 Lit., w 545×d 350×h 110 mm

Optional AccessoriesDH.WSB02018 Dome Lid, Stainless Steel, SBD018, for 18 Lit.

w 363×d 353×h 69 mm DH.WSB02030 Dome Lid, Stainless Steel, SBD030, for 30 Lit.

w 563×d 353×h 69 mmDH.WSB02045 Dome Lid, Stainless Steel, SBD045, for 45 Lit.

w 663×d 433×h 69 mm

Validation (IQ, OQ & PQ) ServiceDH.WSB31018 Validation Service(IQ, OQ & PQ), SBV018, for 18 Lit.DH.WSB31030 Validation Service(IQ, OQ & PQ), SBV030, for 30 Lit.DH.WSB31045 Validation Service(IQ, OQ & PQ), SBV045, for 45 Lit.

<Continued from...““witeg””WiseBath��WSB Digital Precise Shaking Water Bath >

Dome Lid (Optional)

※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ffllaasskkss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 3344,, 229944,, 229955,, 229988,, 229999,, 330088..

www.witeg.de 33

BaBaths, Viscosity


Model WVB-30 WVB-52


Bath (mm) 350×300×300 500×300×350

External (mm) 585×375×420 730×380×470

Capacity 30 Lit 52 Lit.

Heater 2 kW 3 kW

Temp.


Accuracy ±0,1 ℃


Sensor PT100



Pump Magnetic Drive, Max. Flow 30 Lit. / min

Material



Window Vacuum Sealed and Tempered Safety Pair Glasses



Drain Included

Viewing Window Size(mm) 230×180

Others



Alarm (Error Status and Timer -end)

Packing Dimension(w××d××h) (mm) 640×450×500 800×450×550


Power Consumption 2 kW 3 kW



Specification

■■ Used for Precise Measurement with Capillary Viscometers■■ Innovative Easy-to-Use Digital Fuzzy Controller■■ Powerful Circulation Pump ensures Highest Uniformity of Temperature■■ Patented Jog-Shuttle Control System and Digital LCD Display with

Back-Light Function.■■ CE Certified

Application & Features�Powerful Circulation Pump (30 Lit. / min) ensures Highest Uniformity of Temperature in the Bath.�Used for Precise Measurement with Capillary Viscometers.�Stainless Steel(#304) made inner bath.� Innovative Easy-to-Use Digital Fuzzy Controller. �Stainless Steel Lid Contains Five Holes for Insertion of Viscometer Holders. �Digital Timer Function : ‘Delay Time’ and ‘Operation Time’ can be Controlled.�User’s Self-compensation Function to Control Difference between Real Temperature and

Indicated Temperature.�Over Temperature & Over Current Protection, Sensor Error Detection.�Storage Function for the Set Values of Temperature and Time.�Alarm Function : Error Status and Timer-end.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.

Digital Precise Viscosity Bath (WVB-30)

““witeg””WiseBath��WVB Digital Precise Viscosity Bath, 30- & 52-Lit.with Transparent Window, Stainless Steel Lid for Viscometer Holder, Digital Fuzzy Control System, up to 100 ℃, ± 0.1 ℃


Transparent Window


Viscometer HolderPatented Control System(No. 10-0554098)





Baths, ViscosityBa

Stainless Steel Lid has 5 Holes for Insertion of Viscometer Holders

(WVB-30, 30Lit.)


DH.WVB01030 Viscosity Bath, WVB-30, 30 Lit.DH.WVB01052 Viscosity Bath, WVB-52, 52 Lit.

�1×Stainless Steel Lid for Viscometer Holder Included

Spare AccessoriesDH.WVB11030 Flat Lid, for Viscometer Holder, Stainless Steel, VBF030,

for 30 Lit., w 380×d 330, Φ 50 mm 5 HolesDH.WVB11052 Flat Lid, for Viscometer Holder, Stainless Steel, VBF052,

for 52 Lit., w 530×d 330, Φ 50 mm 9 Holes

Optional AccessoryDH.WVB02010 Viscometer Holder, WVB02010

Validation (IQ, OQ & PQ) ServiceDH.WVB31030 Validation Service(IQ, OQ & PQ), VBV030, for WVB-30 DH.WVB31052 Validation Service(IQ, OQ & PQ), VBV052, for WVB-52

Viscometer Holder

<Continued from...““witeg””WiseBath��WVB Digital Precise Viscosity Bath>

Viscometer Holder

www.witeg.de 35

CeCentrifuges, Micro


Ordering InformationDH.WCF00010� Microcentrifuge, CF-10 Set, Max.13.500 rpm,

including Rotor CFAR1512, 230VDH.WCF00011� Microcentrifuge, CF-10 Set, Max.13.500 rpm,

including Rotor CFAR1512, 110V�12 ea×0,2 ml Tube Adapters and 12 ea×0,5 ml Tube Adapters are included

Spare AccessoryDH.WCF00100 Fixed Angle Rotor, CFAR1512, 12×1,5 / 2,0 ml TubesDH.WCF00200 0,2 ml Tube Adapter-sets, 12 ea Adapter / 1 set, CFTA1 for CF-10DH.WCF00300 0,5 ml Tube Adapter-sets, 12 ea Adapter / 1 set, CFTA2 for CF-10

■■ Unbelievably Quiet Operation - Brushless DC motor ■■ High Performance - Digital Feedback Speed Control,

Max. 13.500 rpm, 12.225××g■■ Useful Exclusive Spin Down Button■■ 0,2 ml (0,5 ml) PCR Tube Adapter (12 ea), Angle Rotor CFAR1512

(1,5 / 2,0 ml××12 Tubes)■■ Patented Jog-Shuttle Control System and Digital LCD with Back-Light Function■■ CE Certified

Application & Features�Unbelievably Quiet Operation - Brushless DC motor. �Unnecessary Rotor Lid for Running and Reduced Noise. (≤57dB at Max. RPM)�High Performance - Digital Feedback Speed Control, Max. 13.500 rpm, 12.225×g.�Realize Extremely Compact Design, with Exceptionally Small Footprint. �Acceleration and Braking Times Lower than 15 sec. (for Max. Speed)�Digital Timer Function with Continuous Running Mode. (99 min 59 sec)�Storage Function for the Set Values : RPM & Time.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be disabled)�Safety System for Motor Error. �Electric Door Lock Function Safety.�Safety Electronic Lid Lock System : Opening the Lid is impossible during Operation.�Simple Operation for Repetitive use of ‘Spin Down’ Function.�Angle Rotor CFAR1512. (1,5 / 2,0 ml×12 Tubes) �Using Adapters Accommodates 0,2 ml or 0,5 ml PCR Tubes.�Patented Jog-Shuttle Control System and Digital LCD with Back-Light Function.�CE Certified.

SpecificationModel CF-10

Operating RPM 1.000~13.500 RPM

Max. RCF 12.225×gMax. Capacity 1,5 ml (2,0 ml)×12 TubesControl Digital Feedback Control with Jog Shuttle Switch (Turn+Push)

Display Digital Back-Light LCD

Timer 99 min. 59 sec. (Continuous Mode Available)

Cooling Device Air CoolingDrive System Brushless DC motor, Direct drive

Acceleration Time ≤≤15 sec (at Max. speed)Braking Time ≤≤15 sec (at Max. speed)

Safety System Motor Error Detector, Auto Stop when Opening DoorElectronic Safety Lid Lock System

Noise Level ≤≤57 dB

Dimension (w××d××××h) (mm) 170×226×183Weight 2,3 kg

Others CE Certified


290×240×220

Gross Weight 5 kg

Power Consumption 90 W

Power plug type Hybrid E+FPower Supply* AC 230 V, 50 / 60 Hz

““witeg””WiseSpin��CF-10 High-Performance Microcentrifuge Set, 12×0,2 / 0,5 /1,5 / 2,0 ml TubesCompact, Unbelievably Quiet, Safety System, Easy-to-Use Fixed-Angle Rotor Included, Max. 13.500 rpm, 12.250×g

High-PerformanceExtremely Compact

Unbelievably Quiet OperationHigh-Performance Microcentrifuge

High Performance Microcentrifuge (CF-10)with 12××1,5 / 2,0mmll Tubes Fixed-Angle Rotor (CFAR1512)


Digital BackLight LCD

■■Fixed-Angle Rotor CFAR1512■■Unnecessary Rotor Lid for Running■■12××1,5 / 2,0ml Tubes

※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ttuubbeess iinn oouurr ggeenneerraall ccaattaalloogguuee oonn ppaaggee :: 337722..

●● UV Transilluminators●● Portable Gel Documentation System●● Unified Gel Documentation System

For Gel Documentation and Analysis, you can find WiseDoc��

Range is the Best Choice Based on it`s Cost-effective, FlexibleConfiguration and High Specification.The Compact 1,5M Pixel Camera, Safe Darkroom and Built-in Transilluminator Implement an Innovation in DNA Imaging Labs.You can use the System with PC Through USB Interface.

WGD-20

WGD-30

WUV-L50

▶▶Portable Gel Documentation System

▶▶Unified Gel Documentation System

▶UV Transilluminator

WiseDoc��& WiseUv��

Gel DocumentationSystemGel DocumentationSystem

36

www.witeg.de 37

ElElectrophoresis, Transilluminators

Model WUV-L10 WUV-L20 WUV-L50 WUV-M10 WUV-M20

Filter Size (mm) 200×200

Wave Length(nm)

Single365

Single312

Dual365+312

Single365

Single312

UV Lamps 15 W×6 ea (90 W) 8 W×6 ea (48 W)

Dimension(w××d××h) (mm)

495×330×95 350×275×95

Weight 10 kg 8 kg

Others CE Certified

Packing Dimension(w××d××××h) (mm) 520×380×220 380×320×220


Power Consumption 90 W 48 W


Power AC 230 V, 50 / 60 Hz


““witeg””WiseUv��WUV UV Transilluminators, Standard - and Compact-Case ModelsEconomical, Robust, Versatile, Hinged UV-Blocking Safety Cover, 20×20 cm Filter, 48 W / 90 W, 312 nm /365 nm /312+365 nm

■■ Low Cost, Robust, Versatile, Affordable & Gentle Excitation■■ Hinged UV-Blocking Safety Cover Protects User from UV Radiation■■ Stainless-Steel Frame and Robust Steel Housing■■ Increased UV Intensity and Homogeneity■■ CE Certified

Application & Features� Low Cost, Robust, Versatile, Affordable & Gentle Excitation.�Hinged UV-Blocking Safety Cover Protects User from UV Radiation.� Long-Life Electronic. (Low Heat, no Flickering)�Stainless-Steel Frame and Robust Steel Housing.� Increased UV Intensity and Homogeneity. �Used for Standard Gel Documentation and Preparative Work.� Ideal for Detecting Very Small Amount of DNA & RNA Stained by EtBr.�High (100 %) / Low (75 %) Intensity Switch.�CE Certified.

Specification

Ordering InformationStandard Case ModelDH.WUV00010 Transilluminator, WUV-L10, 20×20 cm Filter, 365 nm, 15 W×6 eaDH.WUV00020 Transilluminator, WUV-L20, 20×20 cm Filter, 312 nm, 15 W×6 eaDH.WUV00050 Transilluminator, WUV-L50, 20×20 cm Filter, 365 nm＋312 nm, 15 W×6 ea

Mini Case ModelDH.WUV00110 Transilluminator, WUV- M10, 20×20 cm Filter, 365 nm, 8 W×6 eaDH.WUV00120 Transilluminator, WUV- M20, 20×20 cm Filter, 312 nm, 8 W×6 ea

Spare AccessoriesDH.WUV01010 UV Lamp, UVL365, for WUV-L10/-L50, 365 nm, 15 WDH.WUV01020 UV Lamp, UVL312, for WUV-L20/-L50, 312 nm, 15 W

DH.WUV01110 UV Lamp, UVM365 for WUV-M10, 365 nm, 8 WDH.WUV02110 UV Lamp, UVM312 for WUV-M20, 312 nm, 8 W

Transilluminator, Standard Type (WUV-L50)

Transilluminator, Mini Type (WUV-M20)

UV Filter

UV Filter


Electrophoresis, Gel Documentation SystemsEl


Model WGD-20

CCDModule

Image Area Size 1 / 2 � CCD

Max. Resolution 1.360×1.024

Pixel Size 4,65×4,65 um

Lens Mount C mount

Power Supplied USB

Optical Size 7,6×6,2 mm

Connect to PC USB 2,0

ManualZoomLens

Iris F1.0 - Close

Focal Length 8~48mm

Operation Temp. - 10 ℃ to + 50 ℃

Overall

Dimension(w××d××h) (mm)

260×260×430

Weigth 9 kg

Software Capability Windows XP, Vista & 7


Others CE Certified

Gross Weight 18 kg

Power Supply* USB Only

““witeg””WiseDoc��WGD-20 Portable Gel Documentation System, 1.5M PixelCompact & Cost-Effective System, Real-Time Image through USB Interface, WiseCaptureⅡⅡTM Capture Software, Portable Darkroom Hood with Digital CCD Camera & Optical Lens, TotalLabTM DNA Analysis Software

Portable Gel Documentation System (WGD-20)

Digital CCD Camera

Optical Lens

DarkroomHood

■■ The Most Cost-Effective System in the Market■■ High Precise and Large Caliber Optical Lens with Zoom,

Focus and Iris Control are Used■■ CE Certified

Application & Features� The Most Cost-Effective System in the Market.�Digital CCD Camera (Resolution 1.5 Million pixel) with Portable Darkroom is Offered.� 1.360×1.024, 10-bit CCD, Avilable for 8-bit Gray Level Image Capturing.�External Dimension : 260×260×430 mm�Weight : 9 kg�Power Consumption : N/A �Very Compact Portable Darkroom System Enables the Existing Transilluminators in the Lab to be

used together with. High Flexibility in use is Offered.�High-Precision and Large Caliber Optical Lens with Zoom, Focus and Iris Control is used.�USB 2,0 Interface is Available, through which Real-Time Images are Transferred Directly to PC. �WiseCaptureⅡTM Software : Easy and Fast Capture of Gel Image.�TotalLabTM Software : Fully Automatic, Single Button Press Complete Image Analysis

within Area of Interest. (Optional)�CE Certified.

WiseCaptureⅡTM :: Real-Time Image Viewing, Capture, Manipulate and Save Images

※ Computer System Reqirements

- Intel Chipset, USB 2,0 Support Mainboard- Over Pentium 4 Processor- Over 256 MB Main Memory- Over 60 MB Space of HDD for Installation and Running- Windows XP and Vista OS


Specification

www.witeg.de 39

ElElectrophoresis, Gel Documentation Systems

TotalLabTM Quant■Automatic and Manual Lane Detection

Background SubtractionFully Automatic Band DetectionMolecular Size / pI CalibrationQuantity CalibrationNormalization

Phoretix 1D (additional function)■Band Matching, Band Picking, Dendrograms

Intensity Calibration

Phoretix 1D Pro (additional function)■Match Band Data Patterns across Large Groups of Lanes

Choice of Algorithms to Generate Dendrograms: NeighborJoining, UPGMA, Complete Linkage, Single Linkage, WardLibrary, Queries Function

TotalLabTM Software

Lane & BandOne Stop Analysis

Band Pattern AnalysisBand Matching


DH.WGD00020 Gel Doc. System, WGD-20, with a Camera, Portable Darkroom Hood and WiseCaptureⅡTM

DH.WGD00024 Gel Doc. System, WGD-20S, with a Camera, Portable Darkroom Hood,TotalLabTM Quant, DNA Analysis S/W and WiseCaptureⅡTM

Spare & Optional AccessoriesDH.WUV00020 Transilluminator, WUV-L20, 20×20 cm Filter, 312 nm, 15 W×6 eaDH.WUV00050 Transilluminator, WUV-L50, 20×20 cm Filter, 365 nm＋312 nm, 15 W×6 ea DH.WUV00120 Transilluminator, WUV- M20, 20×20 cm Filter, 312 nm, 8 W×6 ea

DH.WGD00100 TotalLabTM Quant, DNA Analysis S/WDH.WGD00120 Phoretix 1D, DNA Analysis S/WDH.WGD00121 Phoretix 1D Pro, DNA Analysis S/WDH.WGD00200 LapTop Computer for WGD Gel Doc.System, WGD-Laptop

<Continued from...““witeg””WiseDoc��WGD-20 Portable Gel Documentation System >

Model WGD-30

CCDModule

Image Area Size 1 / 2 � CCD

Max. Resolution 1.360×1.024

Pixel Size 4,65×4,65 um

Lens Mount C mount

Power Supplied USB

Optical Size 7,6×6,2 mm

Connect to PC USB 2,0

ManualZoomLens

Iris F1,0 - Close

Focal Length 8~48 mm

Operation Temp. -10 ℃ to +50 ℃

Transilluminater

Filter Size 200×200 mm

Wave Length Single 312 um

UV Lamps 8 W×6 ea

Overall

DaylightFluorescent Lamps 7 W×2 ea

Dimension (w××d××h) (mm) 395×393×676,5

Weigth 19 kg

Power AC 110V, 60 Hz or 220 V, 50 / 60 Hz


Software Capability Windows XP, Vista & 7

Others CE Certified


Gross Weight 23 kg


Electrophoresis, Gel Documentation SystemsEl


““witeg””WiseDoc��WGD-30 Unified Gel Documentation System, 1,5M PixelComplete System, Real-Time Image through USB Interface, WiseCaptureⅡⅡTM Capture Software, Unified Darkroom System in-Built Sliding Transilluminator with Digital CCD Camera &Optical Lens, TotalLabTM DNA Analysis Software

Unified Gel Documentation System (WGD-30)

Digital CCD Camera

■■ Complete System with Digital CCD Camera, Safety Darkroom Hood and in-built Transilluminator is Offered

■■ High-Quality Optical Lens with Zoom, Focus and Iris Control is Used■■ CE Certified

Application & Features�Complete System with a Digital CCD Camera, Safety Darkroom Hood and in-built

Transilluminator is Offered. �Unified Darkroom System with in-built Sliding Transilluminator offers very High Safety in use.�Transilluminator: 312 nm, 8 W×6 UV lamps. (WUV-M20)� External Dimension : 395×393×676,5 mm� Internal Dimension : 350×275×400 mm�Door Size : 343×257 �Weight : 19 kg�White Light : 2 ×Fluorescent lamp. �Power Consumption : 60 W�Digital CCD Camera. (Resolution 1.5 Million pixel)� 1.360×1.024, 10-bit CCD, Avilable for 8-bit Gray Level Image Capturing.�High-Quality Optical Lens with Zoom, Focus and Iris Control (Manual Adjust) is used.�USB 2.0 Interface is available, through which Real-time Images are Transferred Directly to PC. �WiseCaptureⅡTM Software : Easy and Fast Capture of Gel Image. (Included)� TotalLabTM Software : Fully Automatic, Single Button Press Complete Image Analysis

within Area of Interest.�CE Certified.

WiseCaptureⅡTM :: Real-Time Image Viewing, Capture, Manipulate and Save Images

※ Computer System Reqirements

- Intel Chipset, USB 2.0 Support Mainboard- Over Pentium 4 Processor- Over 256MB Main Memory- Over 60MB Space of HDD for Installation and Running- Windows XP and Vista OS

Transilluminator 312nm, 8W××6 UV lamps

Optical Lens


Specification

www.witeg.de 41

ElElectrophoresis, Gel Documentation Systems


DH.WGD00030 Gel Doc. System, WGD-30, with a Camera (1,5M Pixel), Darkroom Hood, in-built WUV-M20 Transilluminator and WiseCaptureⅡTM

DH.WGD00034 Gel Doc. System, WGD-30S, with a Camera (1,5M Pixel), Darkroom Hood,in-built WUV-M20 Transilluminator, WiseCaptureⅡTM andTotalLabTM Quant DNA Analysis S/W

Spare & Optional AccessoriesDH.WGD00100 TotalLabTM Quant, DNA Analysis S/WDH.WGD00120 Phoretix 1D, DNA Analysis S/WDH.WGD00121 Phoretix 1D Pro, DNA Analysis S/WDH.WGD00200 LapTop Computer, for WGD Gel Doc.System

DH.WUV01110 UV Lamp, UVM365 for WUV-M10, 365 nm, 8 WDH.WUV02110 UV Lamp, UVM312 for WUV-M20, 312 nm, 8 W

WGD-20 / 30 Lens System

USB Interface

A standard High-Throughput PC Interface Enables High-SpeedTransfer of Real-Time Images from CCD Camera.(NOTE) Only the USB version 2,0 is Supported.

WGD-20/-30 Lens

Iris ControlExcellent Bright Zoom Lens (F 1,0 - Close)

Zoom ControlWide Range & Easy to Control Focal Length Availble on about 8 - 16mm

Focus ControlHigh Precision Large Caliber Zoom Lens

<Continued from...““witeg””WiseDoc��WGD-30 Unified Gel Documentation System >

●● Digital Muffle Furnaces●● Programmable Digital Muffle Furnaces

▶▶ Digital Muffle Furnace 1.000℃ / 1.200℃

▶▶ Programmable Muffle Furnace1.000℃ / 1.200℃

WiseTherm��

FurnacesFurnaces

42

FP-14

F-14

www.witeg.de 43

FuFurnaces

Specification

““witeg””WiseTherm��F/FH High Performance Digital Muffle Furnaces, 1.000 ℃/1.200 ℃with Patented PID Jog-Shuttle Control System, BackLightLCD, Short Heat-up Time, Ceramic Fiber with Heating Wire, 4-Side Heating, 3~14, 27, 63 Lit.



Reeaalliizzee ““Eaassyy ttoo Ussee””Ordering Information3~14 Lit. / 1.000 ℃ Standard Furnace DH.WF11.03 Furnace, F-03, 1.000 ℃, 3 Lit.DH.WF11.05 Furnace, F-05, 1.000 ℃, 4,5 Lit.DH.WF11.12 Furnace, F-12, 1.000 ℃, 12 Lit.DH.WF11.14 Furnace, F-14, 1.000 ℃, 14 Lit.

27& 63 Lit. / 1.000 ℃, Large Volume FurnaceDH.WF11.27 Furnace, large volume, F-27, 1.000 ℃, 27 Lit.DH.WF11.63 Furnace, large volume, F-63, 1.000 ℃, 63 Lit.

3~14 Lit. / 1.200 ℃, Standard Furnace DH.WFH12.03 Furnace, FH-03, 1.200 ℃, 3 Lit.DH.WFH12.05 Furnace, FH-05, 1.200 ℃, 4,5 Lit.DH.WFH12.12 Furnace, FH-12, 1.200 ℃, 12 Lit.DH.WFH12.14 Furnace, FH-14, 1.200 ℃, 14 Lit.

27& 63 Lit. / 1.200 ℃, Large Volume FurnaceDH.WFH12.27 Furnace, Large Volume, FH-27, 1.200 ℃, 27 Lit.DH.WFH12.63 Furnace, Large Volume, FH-63, 1.200 ℃, 63 Lit.

Validation (IQ, OQ & PQ) ServiceDH.WF311.03 Validation Service(IQ, OQ & PQ), FV1103, for F-03 DH.WF311.05 Validation Service(IQ, OQ & PQ), FV1105, for F-05 DH.WF311.12 Validation Service(IQ, OQ & PQ), FV1112, for F-12 DH.WF311.14 Validation Service(IQ, OQ & PQ), FV1114, for F-14 DH.WF311.27 Validation Service(IQ, OQ & PQ), FV1127, for F-27DH.WF311.63 Validation Service(IQ, OQ & PQ), FV1163, for F-63 DH.WFH312.03 Validation Service(IQ, OQ & PQ), FHV1203, for FH-03 DH.WFH312.05 Validation Service(IQ, OQ & PQ), FHV1205, for FH-05 DH.WFH312.12 Validation Service(IQ, OQ & PQ), FHV1212, for FH-12DH.WFH312.14 Validation Service(IQ, OQ & PQ), FHV1214, for FH-14DH.WFH312.27 Validation Service(IQ, OQ & PQ), FHV1227, for FH-27DH.WFH312.63 Validation Service(IQ, OQ & PQ), FHV1263, for FH-63

Digital Muffle Furnace (F-14)

■■ Ceramic Fiber embeded Heating Wire, 4-Side Heating■■ Digital PID Controller ■■ Patented Jog-Shuttle Control System and Digital LCD Display with

Back-Light Function ■■ CE Certified

Application & Features�Designed for Ash-Determinations, Enameling, Fusions, Ignitions, and Precipitate Drying.�Digital PID Controller. �Ceramic Fiber embeded Heating Wire, 4-Side Heating.�Ceramic Plate is Provided. (FH-model only) �Short Heating-Up Time.�Over Temperature & Over Current Protection, Sensor Error Detection� Low Weight and High Grade Insulation. �High Quality / Low Price. �CE Certified. �Digital Timer Function : 99 hr 59 min�Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.

Model F-03 F-05 F-12 F-14 F-27 F-63Temp. Range Max. 1.000 ℃

Model FH-03 FH-05 FH-12 FH-14 FH-27 FH-63Temp. Range Max. 1.200 ℃Dimension(w××d××h)

Internal (cm) 13×25×9 15×30×10 20×30×20 25×35×16 30×30×30 40×40×40External (cm) 39×48×53 42×53×55 48×55×66 53×58×62 58×59×76 63×71×79

Capacity 3 Lit. 4,5 Lit. 12 Lit. 14 Lit. 27 Lit. 63 Lit.Required time to be reached 800℃℃ 16 min 20 min 23 min

Temp.Internal Ceramic Fiber with Heating WireExternal Powder Coated SteelInsulation Ceramic Fiber

Controller Digital PID Controller with Jog-Shuttle Switch (Turn+Push) Display Digital LCD Display with Back-Light FunctionTimer 99 hr 59 min (Continuous Function Included)Thermocouple K-typeHeater (Kantal A1) Ceramic Fiber with Heating Wire, 4-Side HeatingSafety Device Over Temp. and Over Current Protector, Sensor Error DetectorOthers CE CertifiedPower Consumption 1,4 kW 1,8 kW 3,6 kW 4,0 kW 4,6 kW 9 kWPower plug type Hybrid E+F 3~ 16A CEEPower Supply� AC 230 V, 50 / 60 HzPacking Dimension(w××d××h) (cm) 62×53×74 68×58×76 67×62×90 72×68×84 74×74×105 116×90×110

Weight 35 kg 38 kg 47 kg 56 kg 62 kg 80 kgGross Weight 54 kg 62 kg 82 kg 88 kg 104 kg 225 kg

for Inner Chamber of FH-ModelCeramic Fiber with Heating Wire


Short Heat-up Time



FurnacesFu

Specification


■■ Digital PID Programmable Controller : 3 Patterns with 16 Segments■■ CE Certified

Application & Features�Designed for Ash-Determinations, Enameling, Fusions, Ignitions, and Precipitate Drying.�PID Programmable Controller : 3 Patterns with 16 Segments.�Short Heating-Up Time.�Programmable Timer : 99 hr 59 min �Resolution : 1 ℃, 1 min�Ceramic Fiber embeded Heating Wire, 4-Side Heating.�Ceramic Plate is Provided. (FHP-model only)�Over Temperature & Over Current Protection, Sensor Error Detection.� Low Weight and High Grade Insulation. �High Quality / Low Price. �CE Certified.

““witeg””WiseTherm��FP/FHP Programmable Digital Muffle Furnaces, 1.000 ℃/1.200 ℃Digital PID Programmable Controller, Short Heat-up Time, Ceramic Fiber with Heating Wire, 4-Side Heating, 3~14, 27-/63- Lit.

Programmable Digital Muffle Furnace (FP-14)

Digital PID Controller: 3 Patterns with 16 Segments

inner chamber of FHP-modelCeramic Fiber with Heating Wire

Model FP-03 FP-05 FP-12 FP-14 FP-27 FP-63

Temp. Range Max. 1.000 ℃Model FHP-03 FHP-05 FHP-12 FHP-14 FHP-27 FHP-63

Temp. Range Max. 1.200 ℃Dimension(w××d××h)

Internal (cm) 13×25×9 15×30×10 20×30×20 25×35×16 30×30×30 40×40×40External (cm) 39×48×53 42×53×55 48×55×66 53×58×62 58×59×76 63×71×79

Capacity 3 Lit. 4,5 Lit. 12 Lit. 14 Lit. 27 Lit. 63 Lit.Required time to be reached 800℃℃ 16 min 20 min 23 min

MaterialInternal Ceramic Fiber with Heating WireExternal Powder Coated SteelInsulation Ceramic Fiber

Controller Programmable PID Controller : 3 Patterns 16 SegmentsDisplay LEDThermocouple K-typeHeater (Kantal A1) Ceramic Fiber with Heating Wire, 4-Side HeatingSafety Device Over Temp. and Over Current Protector, Sensor Error DetectorOthers CE CertifiedPower Consumption 1,4 kW 1,8 kW 3,6 kW 4.0 kW 4.6 kW 9 kWPower plug type Hybrid E+F 3~ 16A CEEPower Supply� AC 230 V, 50 / 60 HzPacking Dimension(w××d××h) (cm) 62×53×74 68×58×76 67×62×90 72×68×84 74×74×105 116×90×110

Weight 35 kg 38 kg 47 kg 56 kg 62 kg 80 kg

Gross Weight 54 kg 62 kg 82 kg 88 kg 104 kg 225 kg

Short Heat-up Time

Ordering Information3~14 Lit., / 1.000 ℃, Standard Programmable FurnaceDH.WF11.P03 Furnace, Programmable, FP-03, 1.000 ℃, 3 Lit.DH.WF11.P05 Furnace, Programmable, FP-05, 1.000 ℃, 4,5 Lit.DH.WF11.P12 Furnace, Programmable, FP-12, 1.000 ℃, 12 Lit.DH.WF11.P14 Furnace, Programmable, FP-14, 1.000 ℃, 14 Lit.

27 & 63 Lit., / 1.000 ℃, Large Volume Programmable FurnaceDH.WF11.P27 Furnace, Programmable, Large Volume, FP-27, 1.000 ℃, 27 Lit.DH.WF11.P63 Furnace, Programmable, Large Volume, FP-63, 1.000 ℃, 63 Lit.

3~14 Lit. / 1.200 ℃, Standard Programmable FurnaceDH.WFH12.P03 Furnace, Programmable, FHP-03, 1.200 ℃, 3 Lit.DH.WFH12.P05 Furnace, Programmable, FHP-05, 1.200 ℃, 4,5 Lit.DH.WFH12.P12 Furnace, Programmable, FHP-12, 1.200 ℃, 12 Lit.DH.WFH12.P14 Furnace, Programmable, FHP-14, 1.200 ℃, 14 Lit.

27 & 63 Lit. / 1.200 ℃, Large Volume Programmable FurnaceDH.WFH12.P27 Furnace, Programmable, Large Volume, FHP-27, 1.200 ℃, 27 Lit.DH.WFH12.P63 Furnace, Programmable, Large Volume, FHP-63, 1.200 ℃, 63 Lit.

Validation (IQ, OQ & PQ) ServiceDH.WF311.P03 Validation Service(IQ, OQ & PQ), FPV1103, for FP-03 DH.WF311.P05 Validation Service(IQ, OQ & PQ), FPV1105, for FP-05 DH.WF311.P12 Validation Service(IQ, OQ & PQ), FPV1112, for FP-12 DH.WF311.P14 Validation Service(IQ, OQ & PQ), FPV1114, for FP-14 DH.WF311.P27 Validation Service(IQ, OQ & PQ), FPV1127, for FP-27DH.WF311.P63 Validation Service(IQ, OQ & PQ), FPV1163, for FP-63 DH.WFH312.P03 Validation Service(IQ, OQ & PQ), FHPV1203, for FHP-03 DH.WFH312.P05 Validation Service(IQ, OQ & PQ), FHPV1205, for FHP-05 DH.WFH312.P12 Validation Service(IQ, OQ & PQ), FHPV1212, for FHP-12 DH.WFH312.P14 Validation Service(IQ, OQ & PQ), FHPV1214, for FHP-14 DH.WFH312.P27 Validation Service(IQ, OQ & PQ), FHPV1227, for FHP-27DH.WFH312.P63 Validation Service(IQ, OQ & PQ), FHPV1263, for FHP-63

●● High Performance Dry Bath - Heating ●● High Performance Dry Bath - Heating & Cooling

- Designed for Multi-functional Dry Bath.- Ideal for Enzyme Reactions, Inactivation of Sera, Incubation, and Other Laboratory Procedures.

- Precise Temperature Control : ±0,2 ℃ Accuracy.

HB-48-Set

HB-R48-Set

HB-96-Set-Double Size

HB-96D-Set-Dual type

▶▶Dry Bath - Heating

▶▶Dry Bath - Heating & Cooling

WiseTherm��

Dry BathDry Bath

45www.witeg.de


Heating, Block/Dry BathHe

■■ Designed for Multi-functional Dry Bath ■■ Patented Jog-Shuttle Control System and Digital LCD Display with


Application & Features�Designed for Multi-functional Dry Bath. �Modular Block.� Ideal for Enzyme Reactions, Inactivation of Sera, Incubation and Other Laboratory Procedures.� Precise Temperature Control : Ambient +5 ℃ ~ 150 ℃ with ±0,2 ℃ Accuracy.� User’s Self-Compensation Function for Temperature. (±10,0 ℃) �Over Temperature & Over Current Protection and Sensor Error Detection.� Digital Timer Included : up to 99 hr 59 min. (Operation Time + Delay Time)� Storage function for the Set Values of Temperature and Timer.� Alarm Function : Error Status and Timer-end. � Various kind of Blocks are offered. (Optional)� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)� The Block Extraction Tongs Included for Easy Handing. � Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.� CE Certified.

High Performance Dry Bath-HeatingHB-48-Set (with BLC548 Block)

““witeg””WiseTherm��HB High-performance Dry Bath-HeatingPrecise Temperature Control, Modular Blocks, Digital Timer & PID-Control System, Acrylic Lid, up to 150 ℃, ±0,2 ℃




Block 1,5㎖㎖ tubes, 48 holes(BLC548)

Dry Bath-Heating PackageHB-96-Set (with 2 ea of BLC548 Blocks)

Dry Bath-Heating Dual ControlHB-96D-Set (with 2 ea of BLC548 Blocks)

2×BLC548 Blocks included

Acrylic LidsDual PID Controller


uupp ttoo 115500 ℃℃


Model HB-48-Set HB-96-Set HB-96D-Set


Block (mm) 90×120×60 (90×120×60)×2 ea (90×120×60)×2 ea

External (mm) 180×220×155 240×255×155 285×250×155

Capacity (1.5ml Tube) 48 ea 96 ea

Heater 150 W×2(Cartridge Heater) 150 W×4 (Cartridge Heater)

Temp.Range Ambient ＋5 ℃ to 150 ℃

Accuracy ±0,1 ℃ at 37 ℃, ±0,2 ℃ at 90 ℃, ±0,4 ℃ at 135 ℃

Heat-Up Speed Approx. 5 ℃/min

Controller Single Digital PID Controller Dual Digital PID Controller

Display Digital LCD with Back-Light Function

Sensor PT100

Material



Block Anodized Aluminum



Others

CE CertifiedStorage Function (Temp., Timer), Locking Mode




Power Consumption 300 W 600 W


Power Supply�� AC 230 V, 50 / 60 Hz

Specification


www.witeg.de 47

HeHeating, Block/Dry Bath


DH.WHB00148 Dry Bath-Heating, HB-48 Unit OnlyDH.WHB00149� Dry Bath-Heating Package, HB-48-Set

with BLC548 Block for 1,5 ml Tubes, 48 holes

DH.WHB00196 Dry Bath-Heating, HB-96 Unit OnlyDH.WHB00197� Dry Bath-Heating Package, HB-96-Set

with Two BLC548 Blocks for 1,5 ml Tubes, 96 holes

DH.WHB00198 Dry Bath-Heating Dual Control, HB-96D Unit OnlyDH.WHB00199� Dry Bath-Heating HB-96D-Set

with Two BLC548 Blocks for 1,5 ml tubes, 96 holes

Optional AccessoriesDH.WHB510596� Block, BLC596, 0,2 ml PCR Tube, 96 holes

DH.WHB510570� Block, BLC570, 0,5 ml Centrifuge Tube, 63 holes DH.WHB511548� Block, BLC548, 1,5 ml Centrifuge Tube, 48 holes

DH.WHB521248� Block, BLT248, for Φ12 mm Test Tube, 48 holes DH.WHB521335� Block, BLT335, for Φ13 mm Test Tube, 30 holes DH.WHB521535� Block, BLT535, for Φ15 mm Test Tube, 30 holesDH.WHB521628� Block, BLT628, for Φ16,5 mm Test Tube, 24 holesDH.WHB521828� Block, BLT828, for Φ18 mm Test Tube, 24 holes

DH.WHB531515� Block, BLC515, 15 ml Conical Tube, 15 holes DH.WHB535008� Block, BLC008, 50 ml Conical Tube, 8 holes

DH.WHB500101 Block Extraction Tongs, BLE101�1×Block Extraction Tongs, BLE101 included

※ If you order BLT series Block, please make sure your test tube size is exact same with your order one.

Validation (IQ, OQ & PQ) ServiceDH.WHB30148 Validation Service(IQ, OQ & PQ), DBV148, for HB-48DH.WHB30196 Validation Service(IQ, OQ & PQ), DBV196, for HB-96 DH.WHB30198 Validation Service(IQ, OQ & PQ), DBV198, for HB-96D

<Continued from...““witeg””WiseTherm��HB High-performance Dry Bath-Heating >

BLC596 BLC570 BLC548 BLT248 BLT335

BLT535 BLT628 BLT828 BLC515 BLC008

BLE101

▶ Optional Accessories

※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ttuubbeess iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 222233--222255,, 226633--226655,, 337711,, 337722..


Heating Block Heating & CoolingHe

Model HB -R48-Set


Block (mm) 90×120×60

External (mm) 185×230×220

Capacity (1.5ml Tube) 48 ea

Cooling Two Peltier Modules

Heater 150 W×2 (Cartridge Heater)

Temp.Range - 5 ℃ to 95 ℃

Accuracy ±0,15 ℃ at 37 ℃, ±0,15 ℃ at 90 ℃

Heat-Up Speed Approx. 5 ℃/ min

Cool-Down Speed 2,3 ℃ / min. between 95 ℃ to 25 ℃, 0,5 ℃ / min. between 25 ℃ to -5 ℃

Controller Digital PID Controller


Sensor PT100

Material



Block Anodized Aluminum



Option Blocks and Extraction Tong

Others

CE CertifiedStorage Function (Temp., Timer), Locking Mode



Gross Weight 10 kg



Power Supply�� AC 230 V, 50 / 60 Hz

““witeg””WiseTherm��HB-R High-performance Dry Bath-Heating && CoolingPrecise Temperature Control, Peltier Cooling System, Digital Timer & PID-Control System, Acylic Lid, -5 ℃~95 ℃, ±0,15 ℃




Block 1,5㎖㎖ tubes, 48 holes (BLC548)

Back Light LCD

High Performance Dry Bath-Heating & CoolingHB-R48-Set (with BLC548 Block)

■■ Designed for Multi-function Digital Dry Bath-Heating & Cooling■■ Patented Jog-Shuttle Control System and Digital LCD Display with


Application & Features� Designed for Multi-function Digital Dry Bath-Heating & Cooling.�Modular Block.� Ideal for Enzyme Reactions, Inactivation of Sera, Incubation and Other Laboratory procedures.� Precise Temperature Control : -5 ℃ ~ 95 ℃ with ±0,15 ℃ Accuracy.�User’s Self-Compensation Function for Temperature. � Peltier Cooling System.� Digital Timer Included : up to 99 hr 59 min (Operation Time + Delay Time)� Storage Function for the Set Values of Temperature and Timer.�Over Temperature & Over Current Protection and Sensor Error Detection.� Alarm Function : Error Status and Timer-end.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)� The Block Extraction Tongs Included for Easy Handing.� Various kind of Blocks are Offered. (Optional) � Patented Jog-Shuttle Control System and Digital LCD Display with Back-Light Function.�CE Certified.

-- 55 ℃℃~~ 9955 ℃℃


Specification



www.witeg.de 49

HeHeating Block Heating & Cooling


DH.WHB00248 Dry Bath-Heating & Cooling, HB-R48 Unit OnlyDH.WHB00249� Dry Bath-Heating & Cooling Package, HB-R48-Set

with BLC548 Block for 1,5 ml Tubes, 48holes

Optional AccessoriesDH.WHB510596� Block, BLC596, 0,2 ml PCR Tube, 96 holes

DH.WHB510570� Block, BLC570, 0,5 ml Centrifuge Tube×63 holes DH.WHB511548� Block, BLC548, 1,5 ml Centrifuge Tube×48 holes

DH.WHB521248� Block, BLT248, for Φ12 mm Test Tube, 48 holes DH.WHB521335� Block, BLT335, for Φ13 mm Test Tube, 30 holesDH.WHB521535� Block, BLT535, for Φ15 mm Test Tube, 30 holesDH.WHB521628� Block, BLT628, for Φ16,5 mm Test Tube, 24 holesDH.WHB521828� Block, BLT828, for Φ18 mm Test Tube, 24 holes

DH.WHB531515� Block, BLC515, 15 ml Conical Tube, 15 holesDH.WHB535008� Block, BLC008, 50 ml Conical Tube, 8 holes

DH.WHB500101 Block Extraction Tongs, BLE101�1×Block Extraction Tongs, BLE101 included

※ If you order BLT series Block, please make sure your test tube size is exact same with your order one.

Validation (IQ, OQ & PQ) ServiceDH.WHB30248 Validation Service(IQ, OQ & PQ), DBRV248, for HB-R48

<Continued from...““witeg””WiseTherm��HB-R High-performance Dry Bath-Heating && Cooling >

BLC596 BLC570 BLC548 BLT248 BLT335

BLT535 BLT628 BLT828 BLC515 BLC008

BLE101

▶ Optional Accessories

※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ttuubbeess iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 222233--222255,, 226633--226655,, 337711,, 337722..

50

FFoorr SSpphheerriiccaall ffllaasskk●● Aluminum-case Heating Mantles with Controller.●● Aluminum-case Stirrer Heating Mantles with Controller.●● Aluminum-case Heating Mantles.●● 10~100 Lit., Large Capacity Heating Mantles, with Steel case.●● High-temperature Aluminum-case Heating Mantles.●● Fabric-housed Heating Mantles.

FFoorr BBeeaakkeerr●● Aluminum-case Beaker Heating Mantles with Controller.●● Aluminum-case Stirrer Beaker Mantles with Controller.●● Aluminum-case Beaker Heating Mantles.●● Fabric-housed Beaker Heating Mantles.

FFoorr RReeaaccttiioonn VVeesssseell●● Reaction Vessel Heating Mantles.●● Reaction Vessel Mantle with Bottom-Outlet.●● Aluminum-case Stirrer Reaction Vessel Mantles,

with Controller.●● Fabric-housed Reaction Vessel Mantles.

FFoorr AAllll HHeeaattiinngg IInnssttrruummeennttss CCoonnttrrooll●● Analog Compact Controller.●● Digital Feedback Controller.●● Analog Aluminum-case Multi Heating Mantles,

with 3 & 6 Places.●● Fabric Heating Mantle Tops.●● Pear-shape Flask Micro-Heating Mantles.●● Heating Tapes, Standard-type.●● Customized Heating Mantles & Insulation.

High Quality !

WHM12034

Stirrer Heating Mantle

WHM12073

Large CapacityHeating Mantle

WHM12094

High-Temp. Heating Mantle

WHM121606

Stirrer Beaker Heating Mantle

WHM12217

Reaction VesselHeating Mantle

WHM722101

Reaction Vessel HeatingMantle with Controller

WHM-C10A

Analog Compact Controller

WHM-C10D

Digital Feedback Controller

WHM12293

Analog 6 places Heating Mantle

WiseTherm��

HeatingMantles

HeatingMantles

Jump into the World!

WiseTherm�� WHM-seriesHigh-Quality Heating Mantles

Full choices of Vessel, Capacity, Housing and Control are Offered !!■Covering All Kind of Vessels : Spherical (Round) Flask Mantles, Pear-shape Flask Mantles,

Beaker Mantles, Reaction Vessel Mantle and Heating Tapes.■Covering All Sizes of Vessels :

- 50, 100, 250, 500, 1.000, 2.000, 3.000, 5.000, 6.000, 10.000, 20.000 ml Round Flasks.- 10, 20, 50, 100 L Large Capacity Round Flasks.- 100, 250, 400, 600, 800, 1.000, 2.000, 3.000, 4.000, 5.000 ml Beakers.- 500, 1.000, 2.000, 3.000, 5.000, 6.000, 7.000, 10.000 ml Reaction Vessels.- 10, 20, 50, 100 L Large Capacity Reaction Vessels.- 10, 25, 50, 100, 250 ml Pear-shape Flasks.

■Covering All Brands of Vessels : Schott-DURAN, IWAKI, PYREX and Kimble.■Various Choices of Housing : Aluminum housed Mantles, Fabric Mantles, Steel Housed

Mantles for Large Capacity Vessels.■Various Choices of Functionality : Mantle -only, Mantle with Heating Control, Mantle with

Heating/Stirring Control, Remote Digital Feedback Thermo Controller.

Powered by Digital Control Technology

■Maximum Temperature : 450 ℃ (Standard Model) or 650 ℃ (High-Temp∙Model).■Highly-processed Aluminum Case offers Robust Standing, Easy Handling and Usability on

the Magnetic Stirrer.■Optional Remote Thermo Controllers are Available (Analog or Digital).■Nickel Chrome Heating Element - Coil Type : Acid-Resistant, Long Life Time.■K-type Thermo Sensor is Basically Embedded (except Fabric Mantles)

which Enables Precise Control of the Mantles when used Together with Remote Digital Controller.

■Feedback Temperature Control is Supported with Remote Digital Controller.■External Thermo Sensor is available, which Enables Precise Control

of the Temperature of Liquid Sample in the Vessel when used Together with Remote Digital Controller.

51www.witeg.de


Heating, Electric Mantle He

Heating Mantle with Controller for Round Flasks (WHM12014)

Stirrer Heating Mantle with Controllerfor Round Flasks (WHM12034)

■ Full Choices of Vessel, Capacity, Housing and Control are Offered! ■ Nickel Chrome Heating Element - Coil Type

: Acid-Resistant, Long Life Time

■ Built-in Temperature Controller■ All Kinds of Round Flasks can be used - DURAN/Kimax/Pyrex/Iwaki■ CE Certified

Heating Mantlewith Controller

Stirrer Heating Mantlewith Controller

Oval-type Stirrer Bar

450 ℃ 50~750 rpm, 450 ℃

““witeg””WiseTherm��WHM Aluminum-case Heating Mantles with ControllerNickel Chrome Heating Element, Built-in Temperature Controller, for Spherical Flask, 50~20.000 ml, 450 ℃

““witeg””WiseTherm��WHM Aluminum-case Stirrer Heating Mantles with ControllerNickel Chrome Heating Element, Stirring & Temperature Controller, for Spherical Flask, 50~6.000 ml, 450 ℃, 50~750 rpm

■ Full Choices of Vessel, Capacity, Housing and Control are Offered!■ Nickel Chrome Heating Element - Coil Type


■ Built-in Temperature Controller■ All Kinds of Round Flasks can be used - DURAN/Kimax/Pyrex/Iwaki ■ CE Certified

※※ 2 pcs of PTFE Magnetic Stirrer Bars Offered : Oval-Type, Φ 6,0×L 15 mm(CW.001.615) and Φ10×L25 mm(CW.001.625.10) one each

※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex※※ Available for “Iwaki” Flask 3.000 ml

☆-Marked 10.000 ml & 20.000 ml Mantle Steel-case / Magnetic Stirring is not Available ※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex

Catalog No. FlaskCapacity

(ml)

Flask Dia. ΦΦ(mm)

Watts(W)

Inside Depth(mm)

Mantle OutsideΦΦ××H (mm)

Support Rod

ΦΦ××H (mm)

Application (Flask-brand)with 230 V with 110 V

DH.WHM12030 DH.WHM12040 50 49 ~ 52 80 40 Φ 145×H 140 Φ 13×H 440 Common-use




DH.WHM12034 DH.WHM12044 1.000 130 ~ 133 350 75 Φ 190×H 165 Φ 13×H 440 Common-use

DH.WHM12035 DH.WHM12045 2.000 165 ~ 169 450 100 Φ 270×H 200 Φ 13×H 660 for DU/Iw.

DH.WHM120351 DH.WHM120451 2.000 161 ~ 164 450 100 Φ 270×H 200 Φ 13×H 660 for Ki/Py.

DH.WHM12036 DH.WHM12046 3.000 184 ~ 187 550 105 Φ 270×H 200 Φ 13×H 660 for DU/Ki.




(ml)

Flask Dia. ΦΦ(mm)

Watts(W)

Inside Depth(mm)


Support Rod

ΦΦ××H (mm)


DH.WHM12010 DH.WHM12020 50 49 ~ 52 80 40 Φ 145×H 140 Φ 13×H 440 Commom-Use




DH.WHM12014 DH.WHM12024 1.000 130 ~ 133 350 75 Φ 190×H 165 Φ 13×H 440 Commom-Use

DH.WHM12015 DH.WHM12025 2.000 165 ~ 169 450 100 Φ 270×H 200 Φ 13×H 660 for DU./Iw.

DH.WHM120151 DH.WHM120251 2.000 161 ~ 164 450 100 Φ 270×H 200 Φ 13×H 660 for Ki./Py.

DH.WHM12016 DH.WHM12026 3.000 184 ~ 187 550 105 Φ 270×H 200 Φ 13×H 660 for DU./Ki.

DH.WHM12017 DH.WHM12027 5.000 221 ~ 224 800 131 Φ 325×H 226 Φ 13×H 800 Commom-Use

DH.WHM12018 DH.WHM12028 6.000 234 ~ 237 800 131 Φ 325×H 226 Φ 13×H 800 for DU./Ki.

DH.WHM12019 DH.WHM12029 10.000 ☆ 278 ~ 282 1.400 150 Φ 390×H 240 Φ 13×H 800 for DU.


www.witeg.de 53

HeHeating, Electric Mantle

■ Full Choices of Vessel, Capacity, Housing and Control are offered !■ Nickel Chrome Heating Element - Coil Type

: Acid-resistant, Long Life Time■ Steel Case : Magnetic Stirring is not available

■ Optional Remote Thermo Controllers are Available(Analog : WHM-C10A, Digital : WHM-C10D)

■ K-type Thermo Sensor is Basically Embedded■ CE Certified

““witeg””WiseTherm��WHM Aluminum-Case Heating Mantles, 450 ℃, 50 ~ 6.000 ml Nickel Chrome Heating Element, Can be used with Magnetic Stirrers, for Spherical Flask, K-type Thermo-Sensor Integrated

““witeg””WiseTherm��WHM Large Capacity Steel Case Heating Mantles, 450 ℃, 10 ~ 100 LitNickel Chrome Heating Element, for Spherical Flask, K-type Thermo-sensor Integrated

■ Full Choices of Vessel, Capacity, Housing and control are offered !■ Highly-processed Aluminum Case Offers Robust Standing,

Easy Handling and Usability on the Magnetic Stirrer■ Optional Remote Thermo Controllers are Available

(Analog : WHM-C10A, Digital : WHM-C10D)

■ Nickel Chrome Heating Element - Coil Type : Acid-Resistant, Long Life Time

■ K-type Thermo Sensor is Basically Embedded ■ CE Certified

※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex

Heating Mantle for Round Flasks (WHM12054)

Large Capacity Heating Mantle for Round Flasks (WHM12073)

WHM-C10D

Realize Precise Temperature Control by integrated K-type Thermo-sensor

Integrated White K-type Thermo-sensor

Nickel ChromeHeating Element- Coil Type Al-Case

Heating Mantle Steel-CaseHeating Mantle


450 ℃

450 ℃

(Deal Drawing)(Deal Drawing)

WHM - C10A

Analog Compact Controller &Digital Feedback Controller (Optional, See page 62)


(ml)

Flask Dia. ΦΦ(mm)

Watts(W)

Inside Depth(mm)


Support Rod

ΦΦ××H (mm)













(Lit.)

Flask Dia. ΦΦ(mm)

Watts(W)

Inside Depth(mm)


Support Rod

ΦΦ××H (mm)


DH.WHM12073 DH.WHM12083 10 278 ~ 282 1.400 160 Φ 390×H 240 Φ 13×H 800 for DU.

DH.WHM12074 DH.WHM12084 20 344 ~ 348 2.000 200 Φ 470×H 260 Φ 13×H 800 for DU.

DH.WHM12075 DH.WHM12085 50 489 ~ 494 4.000 282 Φ 680×H 360 Φ 13×H 800 Common-use

DH.WHM12076 DH.WHM12086 100 609 ~ 614 6.000 350 Φ 840×H 440 n/a Common-use



““witeg””WiseTherm��WHM High-Temperature Aluminum-case Heating Mantles, 650℃,100~10.000 mlNickel Chrome Heating Element, Can be used with Magnetic Stirrers, for Spherical Flask, K-type Thermo-sensor Integrated

““witeg””WiseTherm��WHM Fabric-Housed Heating Mantles, Self-StandingNickel Chrome Heating Element, for Spherical Flask, 450℃, 50 ~10.000 ml

☆-Marked 10.000 ml Mantle Steel-case / Magnetic Stirring is not Available ● Option : Digital Feedback Controller or Analog Controller (See Page 62)

High-temp. Heating Mantle for Round Flasks (WHM12094)

Fabric-housed Heating Mantlefor Round Flasks (WHM12114)

High-Temp.Heating Mantle

Fabric-housed Heating Mantle

※※ Remarks : DU. : DURAN Ki. : Kimax Iw. : Iwaki Py. : Pyrex ※※ Available for “Iwaki” Flask 3.000 ml

● Option : Digital Feedback Controller or Analog Controller (See Page 62)

650 ℃ 450 ℃

■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Nickel Chrome Heating Element - Coil Type



■ CE Certified

WHM-C10D

Realize Precise Temperature Control by integrated K-type Thermo-sensor


Nickel Chrome Heating Element -Coil Type

(Deal Drawing)

WHM - C10A

Analog Compact Controller &Digital Feedback Controller (Optional, See page 62)

(Deal Drawing)


(ml)

Flask Dia. ΦΦ(mm)

Watts(W)

Inside Depth(mm)


Support Rod

ΦΦ××H(mm)









DH.WHM12097 DH.WHM12107 5.000 221 ~ 224 1.200 140 Φ 325×H 165 Φ 13×H 800 Common-use

DH.WHM12098 DH.WHM12108 6.000 234 ~ 237 1.200 140 Φ 325×H 165 Φ 13×H 800 for DU/Ki.


Catalog No.Flask

Capacity (ml)Flask

Dia. ΦΦ(mm) Watts

(W)Inside

Depth (mm)Mantle OutsideΦΦ××H (mm)


DH.WHM12110 DH.WHM12120 50 49 ~ 52 80 30 Φ 80×H 55 Common-use




DH.WHM12114 DH.WHM12124 1.000 130 ~ 133 350 75 Φ 191×H 100 Common-use

DH.WHM12115 DH.WHM12125 2.000 165 ~ 169 450 95 Φ 226×H 120 ideal for DU./Iwa.

DH.WHM121151 DH.WHM121251 2.000 161 ~ 164 450 95 Φ 226×H 120 ideal for Kim./Py.

DH.WHM12116 DH.WHM12126 3.000 184 ~ 187 550 105 Φ 255×H 130 ideal for DU./Kim.

DH.WHM12117 DH.WHM12127 5.000 221 ~ 224 800 130 Φ 293×H 155 Common-use

DH.WHM12118 DH.WHM12128 6.000 234 ~ 237 800 135 Φ 310×H 160 for DU/Kim.

DH.WHM12119 DH.WHM12129 10.000 278 ~ 282 1.400 160 Φ 365×H 185 for DU.

■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Highly-processed Aluminum Case Offers Robust Standing,

Easy Handling and Usability on the Magnetic Stirrer



www.witeg.de



■ External Thermo Sensor is (K-type) Available, which enablesPrecise Control of the Temperature of Liquid Sample in the Vesselwhen used together with Remote Digital Controller

■ CE Certified

55


““witeg””WiseTherm��WHM Fabric Heating Mantle Tops, 450 ℃Nickel Chrome Heating Element, For the Upper Half of 1- /2- /3- neck Flasks, Universal Type

““witeg””WiseTherm��WHM Pear-shape Flask Micro-Heating Mantles, 10~250 ml, 450 ℃NickelChrome Heating Element

● Option : Digital Feedback Controller or Analog Controller (Analog : WHM-C10A, Digital : WHM-C10D / See page 62)

Pear-Shape Flask Micro-Heating Mantles(WHM12273)Analog Compact Controller &

Digital Feedback Controller(Optional, See page 62)

WHM-C10D

WHM - C10A

Fabric Heating Mantle and Top (WHM12114 & WHM121303)

Fiabric Heating Mantle Top

※ Customized Vessel like Diameter (Φ)×Height (cm) or Inside Depth (mm) can be Offered※ We recommend to use a matching power supply with 30 V, 60 V, or 110 V output.

450℃ 450℃


: Acid-Resistant, Long Life Time■ Optional Remote Thermo Controllers are Available


■ External Thermo Sensor is (K-type) Available, which enablesPrecise Control of the Temperature of Liquid Sample in the Vesselwhen used together with Remote Digital Controller

■ Can be used with both Mantles of Fabric-case and Metal-case■ CE Certified

Pear-Shape FlaskMicro-Heating Mantle

Catalog No.Flask

Capacity (ml)Flask

Dia. ΦΦ(mm)Watts & Voltage

Inside Depth (mm)


DH.WHM12271 10 30 ~ 33 20 W, 30 V � 35 Φ 45×H 40DH.WHM12272 25 40 ~ 43 20 W, 60 V � 40 Φ 60×H 50DH.WHM12273 50 50 ~ 53 85 W, 60 V � 50 Φ 70×H 60DH.WHM12274 100 59 ~ 62 80 W, 110 V � 55 Φ 90×H 70

DH.WHM12275 250 80 ~ 83 140 W, 110 V � 65 Φ 120×H 80

Catalog No.Flask

Capacity (ml)Flask

Dia. ΦΦ (mm)Watts

(W)Inside

Depth (mm)Mantle OutsideΦΦ××H (mm)


DH.WHM121301 DH.WHM121311 250 83 ~ 86 100 100 120 Common-use

DH.WHM121302 DH.WHM121312 500 102 ~ 105 140 140 140 Common-use

DH.WHM121303 DH.WHM121313 1.000 130 ~ 133 240 240 180 Common-use





DH.WHM121308 DH.WHM121318 20.000 344 ~ 348 1.600 1.600 430 Common-use




(ml)

Flask Dia. ΦΦ (mm)

Watts(W)

Inside Depth(mm)


Support Rod

ΦΦ××H (mm)




DH.WHM12143 DH.WHM12153 400 79 ~ 81 240 70 Φ 145×H 140 Φ 13×H 440 for DU.

DH.WHM121431 DH.WHM121531 400 76 ~ 78 240 75 Φ 145×H 140 Φ 13×H 440 for Iw/Ki/Py.







DH.WHM12149 DH.WHM12159 5.000 169 ~ 171 800 160 Φ 270×H 235 Φ 13×H 660 for DU.


(ml)


Watts(W)

Inside Depth(mm)


Support Rod

ΦΦ××H (mm)


DH.WHM121601 DH.WHM121611 100 50 ~ 52 80 45 Φ145×H140 Φ13×H440 Common-use


DH.WHM121603 DH.WHM121613 400 79 ~ 81 240 70 Φ190×H165 Φ13×H440 for DU.

DH.WHM121604 DH.WHM121614 400 76 ~ 78 240 70 Φ190×H165 Φ13×H440 for Iw/Ki/Py.


DH.WHM121606 DH.WHM121616 1.000 105 ~ 108 350 105 Φ270×H200 Φ13×H440 Common-use

DH.WHM121607 DH.WHM121617 2.000 130 ~ 132 450 140 Φ270×H235 Φ13×H660 Common-use

DH.WHM121608 DH.WHM121618 3.000 151 ~ 153 550 140 Φ270×H235 Φ13×H660 for DU/Iw.

DH.WHM121609 DH.WHM121619 4.000 160 ~ 162 700 170 Φ325×H270 Φ13×H660 for Ki/Py.

DH.WHM121610 DH.WHM121620 5.000 169 ~ 171 800 170 Φ325×H270 Φ13×H660 for DU.



““witeg””WiseTherm��WHM Aluminum-case Beaker Heating Mantles with ControllerNickel Chrome Heating Element, Built-in Temperature Controller, 100 ~ 5.000 ml, 450 ℃

““witeg””WiseTherm��WHM Aluminum-case Stirrer Beaker Mantles with ControllerNickel Chrome Heating Element, Stirring & Temperature Controller, 100 ~ 5.000 ml, 450 ℃

Beaker Heating Mantles with Controller (WHM12146)

Stirrer Beaker Heating Mantleswith Controller (WHM121606)

Beaker Heating Mantle with Controller

Stirrer Beaker Heating Mantle with Controller

Plain-type Stirrer Bars

450℃ 50~750rpm, 450℃

■ Full Choices of Vessel, Capacity, Housing and Control are Offered!■ Nickel Chrome Heating Element - Coil Type


■ Built-in Temperature Controller■ All Kinds of Round Flasks Can be used - DURAN/Kimax/Pyrex/Iwaki■ CE Certified




■ Built-in Stirring & Temperature Controller■ All Kinds of Round Flasks Can be used - DURAN/Kimax/Pyrex/Iwaki■ CE Certified

※※ 2 pcs of PTFE Magnetic Stirrer Bar Offered : Oval-type, Φ 6,0×L 15 ㎜

(CW.001.615) and Φ10×L25 ㎜(CW.001.625.10) one each


www.witeg.de


(ml)


Watts(W)

Inside Depth(mm)


Support Rod

ΦΦ××H (mm)













DH.WHM121791 DH.WHM121891 10.000☆ 216 ~ 219 1.400 245 Φ 325×H 270 Φ 13×H 660 for DU.

57


““witeg””WiseTherm��WHM Aluminum-case Beaker Heating Mantles, 450 ℃Nickel Chrome Heating Element, Can be used with Magnetic Stirrers, K-type Thermo-sensor Integrated, 100 ~ 10.000 ml

““witeg””WiseTherm��WHM Fabric-Housed Beaker Heating Mantles, 450 ℃Nickel Chrome Heating Element, for Beakers, Self-Standing 50 ~ 5.000 ml


☆-Marked 10.000 ml Mantle Steel-case / Magnetic Stirring is not available ● Option : Digital Feedback Controller or Analog Controller (Analog : WHM-C10A, Digital : WHM-C10D / See page 62)


Beaker Heating Mantles(WHM12173)

Fabric-Housed Beaker Heating Mantles(WHM12196)

Al-Case BeakerHeating Mantle

Fabric-housedHeating Mantle

450℃ 450℃




■ CE Certified

■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Highly-processed Aluminum Case Offers Robust Standing,

Easy Handling and Usability on the Magnetic Stirrer■ Optional Remote Thermo Controllers are Available




WHM-C10D


Nickel ChromeHeating Element -Coil Type

(Deal Drawing)

WHM - C10A

Analog Compact Controller &Digital Feedback Controller

(Optional, See page 62)

(Deal Drawing)

Realize Precise TemperatureControl by Integrated

K-type Thermo-sensor


(ml)


Watts(W)

Inside Depth(mm)


Support Rod

ΦΦ××H (mm)

Application (Flask-brand)with 230V with 110V














(ml)

Flask Dia. ΦΦ (cm)

Watts(W)

Inside Depth (mm)


Support Rod ΦΦ××H (mm)with 230 V with 110 V

DH.WHM12211 DH.WHM12221 500 Φ 11×H 10 240 80 Φ 145×H 105 Φ 13×H 660

DH.WHM12212 DH.WHM12222 1.000 Φ 11×H 15 350 115 Φ 145×H 140 Φ 13×H 660




DH.WHM12216 DH.WHM12226 6.000 Φ 21,5×H 24 800 210 Φ 270×H 235 Φ 13×H 800DH.WHM122161 DH.WHM122261 7.000 Φ 21,5×H 25 850 210 Φ 270×H 235 Φ 13×H 800

DH.WHM12217 DH.WHM12227 10.000 Φ 21,5×H 33 1.400 245 Φ 325×H 270 Φ 13×H 800

DH.WHM122171 DH.WHM122271 10.000 Φ 24×H 31 1.400 245 Φ 325×H 270 Φ 13×H 800


(Lit.)


Watts(kW)

Inside Depth (mm)


Support Rod ΦΦ××H (mm)with 230V with 110V



DH.WHM12219 DH.WHM12229 50 Φ 31,5×H 81 4 720 Φ 470×H 800 Φ 13×H 800

DH.WHM12220 DH.WHM12230 100 Φ 41,5×H 91 6 800 Φ 570×H 900 Φ 13×H 800



““witeg””WiseTherm��WHM Reaction Vessel Heating Mantles, 450 ℃Aluminum Exterior with Fabric Interior, for Cylindrical, K-type Thermo-sensor Integrated, 0,5 ~ 100 Lit■ Full Choices of Vessel, Capacity, Housing and Control are Offered !■ Highly-processed Aluminum Case Offers Robust Standing,

Easy Handling and Usability on the Magnetic Stirrer■ Nickel Chrome Heating Element - Coil Type

: Acid-Resistant, Long Life Time■ Optional Remote Thermo Controllers are available


■ K-type Thermo Sensor is Basically Embedded (Except Fabric Mantles) which Enables Precise Control of the Mantles when used together with Remote Digital Controller

■ External Thermo Sensor is Available, which Enables Precise Control of the Temperature of Liquid Sample in the Vessel when used together with Remote Digital Controller

■ CE Certified

Reaction Vessel Heating Mantles(WHM12217)


(Optional, See page 62) WHM-C10D WHM-C10A




Nickel Chrome HeatingElement - Coil Type

Reaction VesselHeating Mantle

With Steel Case, 20~100 Lit., Not available to use with Magnetic Stirrers

※ Customized Vessel like Diameter (Φ)×Height (cm) or Inside Depth (mm) can be Offered

450 ℃




With Aluminum Case, 0,5~10 Lit., Can be used with Magnetic Stirrers

www.witeg.de


(ml)

Flask Dia. ΦΦ(cm)

Watts(W)

Inside Depth(mm)


BottomOutlet

(Hole)L××w (mm)

Support Rod

ΦΦ××H (mm)with 230 V with 110 V

DH.WHM12231 DH.WHM12241 500 Φ11×H10 240 80 Φ 145×H 105 L 72×w 40 Φ 13×H 660

DH.WHM12232 DH.WHM12242 1.000 Φ11×H15 350 115 Φ 145×H 140 L 72×w 40 Φ 13×H 660

DH.WHM12233 DH.WHM12243 2.000 Φ13×H19 450 140 Φ 190×H 165 L 72×w 40 Φ 13×H 800

DH.WHM12234 DH.WHM12244 3.000 Φ13×H28 550 210 Φ 270×H 235 L 120×w 70 Φ 13×H 800DH.WHM12235 DH.WHM12245 5.000 Φ16×H29 800 210 Φ 270×H 235 L 120×w 70 Φ 13×H 800

DH.WHM12236 DH.WHM12246 6.000 Φ21,5×H24 800 210 Φ 270×H 235 L 120×w 70 Φ 13×H 800

DH.WHM122361 DH.WHM122461 7.000 Φ21,5×H25 850 210 Φ 270×H 235 L 120×w 70 Φ 13×H 800

DH.WHM12237 DH.WHM12247 10.000 Φ21,5×H33 1.400 250 Φ 325×H 270 L 120×w 70 Φ 13×H 800

DH.WHM122371 DH.WHM122471 10.000 Φ24×H31 1.400 250 Φ 325×H 270 L 120×w 70 Φ 13×H 800


(Lit.)

Flask Dia. ΦΦ(cm)

Watts(kW)

Inside Depth(mm)


BottomOutlet

(Hole)L××w (mm)

Support Rod

ΦΦ××H (mm)with 230 V with 110 V

DH.WHM12238 DH.WHM12248 20 Φ27×H45 2 360 Φ 390×H 410 L 120×w 70 Φ 13×H 800DH.WHM122381 DH.WHM122481 20 Φ29×H42 2 360 Φ 390×H 410 L 120×w 70 Φ 13×H 800

DH.WHM12239 DH.WHM12249 50 Φ31,5×H81 4 720 Φ 470×H 800 L 120×w 70 Φ 13×H 800

DH.WHM12240 DH.WHM12250 100 Φ41,5×H91 6 800 Φ 570×H 850 L 120×w 70 Φ 13×H 800

59


““witeg””WiseTherm��WHM Reaction Vessel Heating Mantle with Bottom-Outlet Nickel Chrome Heating Element, for Cylindrical, K-type Thermo-sensor Integrated, 0,5 ~ 100 Lit. 450 ℃


(Optional, See page 62)WHM-C10D WHM-C10A

With Aluminum Case, 0.5~10 Lit.

With Steel Case, 20~100 Lit., Not available to use with Magnetic Stirrers

※ Customized Vessel Like Diameter (Φ)×Height (cm) or Inside Depth (mm) can be Offered


: Acid-Resistant, Long Life Time■ Optional Remote Thermo Controllers are available

(Analog : WHM-C10A, Digital : WHM-C10D)■ CE Certified

■ K-type Thermo Sensor is Basically Embedded (Except Fabric Mantles) which Enables Precise Control of the Mantles when used together with Remote Digital Controller

■ External Thermo Sensor is Available, which Enables Precise Control of the Temperature of Liquid Sample in the Vessel when used together with Remote Digital Controller

Reaction Vessel Heating Mantle with Bottom-Outlet(WHM12233)



Integrated White K-type Thermo-sensor(Deal Drawing)

Nickel Chrome HeatingElement - Coil Type

Reaction Vessel Heating Mantle

with Bottom Outlet

450 ℃




Prices are Subject to Change without Notice. 60

““witeg””WiseTherm��WHM Aluminum-case Stirrer Reaction Vessel Heating Mantles with ControllerNickel Chrome Heating Element, Stirring & Temperature Controllers, For Cylindrical, 500 ~ 7.000 ml, 450 ℃

““witeg””WiseTherm��WHM Fabric-Housed Reaction Vessel MantlesNickel Chrome Heating Element, for Cylindrical 0,5 ~ 7 Lit, 450 ℃

Stirrer Reaction Vessel Mantles with Controller(WHM722101)

Fabric-Housed Reaction Vessel Mantles(WHM12252)

Al-Case Stirrer Reaction Vessel Heating Mantle with Controller

Fabric-housed Reaction Vessel Mantle

50~750rpm, 450℃ 450℃


: Acid-Resistant, Long Life Time■ CE Certified

■ External Thermo Sensor is (K-type) Available, which EnablesPrecise Control of the Temperature of Liquid Sample in the Vesselwhen used together with Remote Digital Controller


: Acid-Resistant, Long Life Time■ Optional Remote Thermo Controllers are Available


■ External Thermo Sensor is (K-type) Available, which EnablesPrecise Control of the Temperature of Liquid Sample in the Vesselwhen used together with Remote Digital Controller

■ CE Certified

Analog Compact Controller &Digital Feedback Controller(Optional, See page 62)

WHM-C10D

WHM - C10A



(ml)


Watts(W)

Inside Depth (mm)


Support Rod ΦΦ××H (mm)with 230 V with 110 V

DH.WHM722100 DH.WHM12210A 500 Φ 11×H 10 240 72 Φ 190×H 165 Φ 13×H 660

DH.WHM722101 DH.WHM12210B 1.000 Φ 11×H 15 350 107 Φ 270×H 200 Φ 13×H 660

DH.WHM722102 DH.WHM12210C 2.000 Φ 13×H 19 450 142 Φ 270×H 235 Φ 13×H 660

DH.WHM722103 DH.WHM12210D 3.000 Φ 13×H 28 550 177 Φ 325×H 270 Φ 13×H 800DH.WHM722104 DH.WHM12210E 5.000 Φ 16×H 29 800 177 Φ 325×H 270 Φ 13×H 800

DH.WHM722105 DH.WHM12210F 6.000 Φ 21,5×H 24 800 177 Φ 325×H 270 Φ 13×H 800

DH.WHM722106 DH.WHM12210G 7.000 Φ 21,5×H 25 850 177 Φ 325×H 270 Φ 13×H 800

Catalog No.Vessel

Capacity (ml)Vessel dia.

ΦΦ××height (cm)Watts(W)

Inside Depth (mm)

Mantle OutsideΦΦ××H (mm)with 230 V with 110 V

DH.WHM12251 DH.WHM12261 500 Φ 11×H 10 240 75 Φ 160×H 100

DH.WHM12252 DH.WHM12262 1.000 Φ 11×H 15 350 115 Φ 160×H 140

DH.WHM12253 DH.WHM12263 2.000 Φ 13×H 19 450 145 Φ 185×H 165

DH.WHM12254 DH.WHM12264 3.000 Φ 13×H 28 550 210 Φ 185×H 235

DH.WHM12255 DH.WHM12265 4.000 Φ 16×H 26 700 210 Φ 220×H 235

DH.WHM12256 DH.WHM12266 5.000 Φ 16×H 29 800 210 Φ 220×H 235

DH.WHM12257 DH.WHM12267 6.000 Φ 21,5×H 24 800 210 Φ 290×H 235

DH.WHM12258 DH.WHM12268 7.000 Φ 21,5×H 25 850 210 Φ 290×H 235


www.witeg.de 61

““witeg””WiseTherm��WHM Analog Aluminum-case Multi Heating Mantles, with 3 & 6 PlacesBuilt-in Analog Controller, Lower Profile, Indel for Extracting∙Refluxing∙Distilling Applictions, 250~1.000 ml, 450 ℃

■ Lower Profile for Space-saving Convenience■ Ideal for Repetitive Extracting(Kjeldahl, Soxhlet, and other Extraction

Procedure), Refluxing and Distilling Laboratory Applications■ Analog Controller Built-in System■ Rods and Clamps are Offered as Standard■ Ideal for DURAN/Kimax /Pyrex & Iwaki-brand Round Flasks

■ Highly-processed Aluminum Case Offers Robust Standing, Easy Handling


■ CE Certified

Analog 6 places Heating Mantles(WHM12293)

Analog 3 places Heating Mantles (WHM12391)

Premium Analog Multi Heating Mantles

Highly-processed Aluminum CaseNickel Chrome Heating Element

6 places Analog Multi Heating Mantle, 250 ml, 300 ml & 500 ml, 450 ℃

3 places Analog Multi Heating Mantle, 500 ml & 1.000 ml, 450 ℃


1.000 mm

Catalog No.Flask Capacity

(ml)

Flask

Watts(W)Inside

Depth (mm)Dimension

W××D××H (mm)with 230V with 110V Max.Dia. ΦΦ (mm)

Bottom

DH.WHM12291 DH.WHM12292 250/300 83 ~ 86 Flat 840 50 800××240××110DH.WHM12293 DH.WHM12294 250/300 83 ~ 86 Round 840 50 800××240××110

DH.WHM12295 DH.WHM12296 500 102 ~ 105 Round 1.440 65 950××270××130

Catalog No.Flask Capacity

(ml)

Flask

Watts(W)Inside

Depth (mm)Dimension

W××D××H (mm)with 230V with 110VMax.

Dia. ΦΦ (mm)Bottom

DH.WHM12391 DH.WHM12392 500 102 ~ 105 Round 720 65 550××270××130

DH.WHM12393 DH.WHM12394 1.000 130 ~ 133 Round 1.050 75 690××340××170




““witeg””WiseTherm��WHM-C10A Analog Compact Temperature ControllerEconomical Controller for All-Purpose Heating Instruments, Solid State, Proportional Voltage Power Control (5~100 %)

Analog Compact Controller (WHM - C10A)

Analog Compact Controller■■ Small Footprint, Compact Analog Temperature Controller ■■ Precise Manual Control of Heating Mantles, Tapes, Cords and Other

Resistive Loads up to 1,2 kW■■ CE Certified

Application & Features� Small Footprint, Compact Analog Temperature Controller. � Safe and Durable Design.� Solid state, Proportional Voltage Power Control. (5~100 % or Rated Voltage)� Precise Manual Control of Heating Mantles, Tapes, Cords and Other Resistive Loads up to 1,2 kW.� CE Certified.

Model WHM-C10A

Control Range 5~100 % of Rated VoltageController Analog Phase ControllerControl Capacity Up to 1,2 kW

Dimension (w××d××h) (mm) 160×128×145Weight 1 kgOthers CE Certified

Packing Dimension (w××d××h) (mm) 190×160×130Gross Weight 2 kgPower plug type Hybrid E+F



Specification

Ordering InformationDH.WHM13500 All-Purpose Analog Controller, WHM-C10A,

5~100 % of Rated Voltage, for up to 1,2 kW Heating Instruments

““witeg””WiseTherm��WHM-C10D Digital Feedback Temperature Controllerwith External Direct Contact Temperature Sensor(Optional), for All-purpose Heating Instruments

<Temp. K-type Sensor : SS300/SS310/SS400/SS410>

<Stand Rod:RD300>

<Holder +Clamp:CL220>

Example of Heating Mantle Set with the Digital Controller

Example of Heating Mantle Set with the Analog Controller

Digital Feedback Controller (WHM-C10D)

Mode Button

Two Line Back LightLCD Display

Turn+PushJog-Shuttle

Ambient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ ControlAmbient + 5~750 ℃ Control

Model WHM-C10D

Temp.Range Ambient +5 ~ 750 ℃Accuracy ±1 ℃ at Set Temperature

Temp. Control Resolution 1 ℃Controller Digital Feedback Controller with Jog Shuttle Switch (Turn+Push)Control Capacity Up to 2 kWDisplay Digital LCD Display with Back Light Function (Temp., Timer)Timer 99 hr 59 min, (Continuous function included)Dimension (w××d××h) (mm) 206×307×99Weight 2,8 kg

Others

CE Certified, Storage Function (Temp., Timer),Locking Mode (Jog-Shuttle Input disabled)

User Self-compensation functionAlarm ( Error Status and Timer-end )

Packing Dimension (w××d××h) (mm) 280×250×110Gross Weight 4 kgPower plug type Hybrid E+FPower Supply� AC 230 V, 50 / 60 Hz

■■ User’s Self-compensation Function : to Control Difference Between Real Temp. and Indicated Temp. (±±10,0 ℃℃)

■■ Patented Jog-Shuttle Control System ■■ CE Certified

Application & Features� Digital Feedback Control by High-Performance Microprocessor.� Digital LCD Display with Back-Light Function.� Small Footprint and User-Friendly Design. � Heating Instruments can be controlled up to 2 kW.� Accurate Temp.Control of the Liquid in the Vessel using Optional Direct K-type Sensor.� User’s Self-compensation Function :

to Control Difference Between Real Temp. and Indicated Temp. (±10,0 ℃)� Storage function, Timer, Alarm & Locking Mode. � Patented Jog-Shuttle Control System.� CE Certified.

Specification


<Continued on Next Page>

www.witeg.de 63



DH.WHM12500 All-Purpose Digital Controller, WHM-C10D, Ambient + 5 ~ 750 ℃, for up to 2 kW Heating Instrumentes

Optional Accessories DH.WHP503037 Stand Rod, RD300, for Heating Mantles, Φ12,7×520 mmDH.WHP503040 Direct Contact Temperature Sensor, SS300, K-type, 330 mm total length, 250 mm probe length, with PlugDH.WHP503041 Direct Contact Temperature Sensor, SS310, K-type, Teflon Coated, 330 mm total length, 250 mm probe length, with PlugDH.WHP503050 Direct Contact Temperature Sensor, SS400, K-type, 380 mm total length, 300 mm probe length, with PlugDH.WHP503051 Direct Contact Temperature Sensor, SS410, K-type, Teflon Coated, 380 mm total length, 300 mm probe length, with Plug

DH.WHP503012 Holder + Clamp for Temp Sensor, CL220

““witeg””WiseTherm��WHM Heating Tapes, Standard-type, 250 ℃, 13 &25 mm Width

� For Glass Tubes Metal Pipet

Heating Tapes

““witeg””WiseTherm�� WHM Custom Heating Mantles & Insulation Bottom Valved Vessels or General-use, Up to 450 ℃~650 ℃

We can Offer witeg Custom Heating Mantles, for which you can Specify the Outside Diameter of the Vessel, Length of Mantle, Voltage,Number of Circuits and Length of Each Heating Zone, Operating Temperature, Unusual Ambient Conditions,Size & Location of Holes for View Ports, and Tubulations.

Please Submit a Sketch for Complicated Applications and Contact our International Sales Team ([email protected]) or our Distributor in your Country.

- Provides Uniform Heating and Insulation for Scrubbing and Fractionating Columns. - Closes with a Zipper, with Eyelets and laces or Hooks and laces. - Internal Operating Temperature is up to 450 ℃ or 650 ℃

Examples for Customized Heating Mantles

Heating Tape

<Continued from...““witeg””WiseTherm��WHM-C10D Digital Feedback Controller>

Catalog No. 13 ㎜㎜ Width××Length(m) Watts & Volt

DH.WHM12311 13 ㎜×0,6 m 200 W, 230 VDH.WHM12312 ×1,0 m 200 W, 230 VDH.WHM12313 ×1,5 m 250 W, 230 VDH.WHM12314 ×2,0 m 300 W, 230 VDH.WHM12315 ×2,5 m 350 W, 230 V

DH.WHM12316 ×3,0 m 400 W, 230 V

Catalog No. 13 ㎜㎜ Width××Length(m) Watts & Volt

DH.WHM12321 25 ㎜×0,6 m 200 W, 230 VDH.WHM12322 ×1,0 m 200 W, 230 VDH.WHM12323 ×1,5 m 250 W, 230 VDH.WHM12324 ×2,0 m 300 W, 230 VDH.WHM12325 ×2,5 m 350 W, 230 VDH.WHM12326 ×3,0 m 400 W, 230 VDH.WHM12327 ×4 m 550 W, 230 V

DH.WHM12328 ×6 m 700 W, 230 V

64

●● Homogenizer with Direct Controller●● Digital Homogenizer with Remote Controller●● Homogenizing Stirrer, for use with Tissue Grinders

- Designed for Liquid and Tissue Samples.- Useful for All Dispersing and Homogenizing Applications.- High-speed / High Quality / Low Noise : Max. 27.000 RPM. (without load)- Speed & Power Control Optimized for a Sample.- High Efficiency Dispersing Tool Made of Stainless steel and PTFE.

HG-15D-Set HG-15A-Set HS-30E-Set

▶▶Homogenizer with Direct Controller

▶▶Homogenizing Stirrer, for use with Tissue Grinders

▶▶Digital Homogenizer with Remote Controller

WiseTis��

& WiseStir��

HomogenizersHomogenizers

www.witeg.de 65

HoHomogenizers, Direct Controller

Model HG - 15A

Dimension (w××d××h)(mm) 60 × 75 × 215Working Range 1 ~ 2.500 mlSpeed Max. 27.000 rpm (without load)Speed Adjustment SteplessMotor Rating (Input / Output) 300 / 160 WController Analog Phase ControllerUsable Tool HT1008, HT1010, HT1018 & HT1025

MaterialBody Aluminum Die-casting and ABSTool Stainless Steel (＃304)

Extension Arm Diameter 12,7 mmExtension Arm Length 250 mmPermissible Ambient Temperature Ambient +5 ~ 50 ℃

Permissible Relative Moisture 85 %Safety Device Over Heat ProtectorWeight 2,5 kgOthers CE CertifiedPacking Dimension (w××d××h)(mm) 320×300×190

Gross Weight 5 kgPower Consumption 160 WPower plug type Hybrid E+FPower Supply�� AC 230 V, 50 / 60 Hz

Homogenizer with Direct Controller(HG-15A-Set-B)

““witeg””WiseTis��HG-15A Homogenizer with Direct Controller, up to 27.000 rpmAnalog Stepless Control System, 1~2.500 ml, High-Speed∙High-Quality∙Low Noise, High Efficiency Dispersing Tools

■■ Useful for All Dispersing and Homogenizing Applications■■ Over Heat Protection■■ CE Certified

Application & Features� Designed for Liquid and Tissue Samples.� Useful for All Dispersing and Homogenizing Applications.� High Speed / High Quality / Low Noise : Max. 27.000 RPM (without load)� Speed & Power Control Optimized for the Sample.� High Efficiency Dispersing Tool made of Stainless Steel and PTFE.� Over-Heat Protection.� Low Cost & High Efficiency.� CE Certified.

Ordering InformationDH.WHG02015 Homogenizer HG-15A-Unit, 1~2.500 ml

Analog Controller, without Dispersing Tool

DH.WHG02016 Homogenizer Package, HG-15A-Set-A, with HT1018 Dispersing Tool, CL200 Clamp, and ST110 Standard Plate StandPacking Dimension w 320×d 300×h 190 mm, Gross Weight 11 kg

DH.WHG02017 Homogenizer Package, HG-15A-Set-B, with HT1025 Dispersing Tool, CL200 Clamp, and ST110 Standard Plate StandPacking Dimension w 320×d 300×h 190 mm, Gross Weight 8 kg

Dispersing ToolsDH.WHG02108 Homogenizer Tool, HT1008, Rotor Φ6.1 , Stator Φ8 , 1~50 mlDH.WHG02110 Homogenizer Tool, HT1010, Rotor Φ7,5 , Stator Φ10, 1~100 mlDH.WHG02118 Homogenizer Tool, HT1018, Rotor Φ12,7, Stator Φ18, 10~1.000 mlDH.WHG02125 Homogenizer Tool, HT1025, Rotor Φ17 , Stator Φ25, 50~2.500 ml

Additional Function Accessories※ witeg WiseStir�, WiseTis� AccessoriesDH.WOS502020 CL200, Clamp for Stirrer or Homogenizer, Cast Aluminum,

Grip Capacity Φ 23 mm for Stand / RodDH.WOS501510 ST110, Standard Plate Stand for Stirrer or Homogenizer,

Φ 16×h 800 mm Rod, 20×35 cm Plate, with Silicone PadDH.WOS501515 ST120, Wide Plate Stand for Stirrer or Homogenizer,

Φ 23×h 1.000 mm Rod, 30×40 cm Plate, with Silicone Pad

※※ See page 67 for the Specifications of Dispersing Tools and Accessories.

Clamp (CL200)

Homogenizer(HG-15A-Unit) Analog Stepless

Control System

Tool (HT1018)

Stand & Rod Set(ST110)

Specification



Homogenizers, Remote Digital ControllerHo

Model HG -15D

Dimension (w××d××h) (mm) 60 × 75 × 215Working Range 1 ~ 2.500 mlSpeed 2.000 ~ 27.000 rpm (without load)Speed Control Resolution 10 rpmMotor Rating (Input / Output) 300 / 160 WController Digital Feedback Controller (Remote Type)Cable Length of Remote Controller 1,8 mDisplay Digital LCD Display with Back-Light FunctionUsable Tool HT1008, HT1010, HT1018 & HT1025

MaterialBody Aluminum Die-Casting and ABSTool Stainless Steel (＃304)

Extension Arm Diameter 12,7 mmExtension Arm Length 250 mmPermissible Ambient Temperature Ambient +5 ~ 50 ℃

Permissible Relative Moisture 85 %Safety Device Over Load & Over Heat ProtectorWeight 2,5 kgOthers CE CertifiedPacking Dimension (w××d××h) (mm) 580×340×230

Gross Weight 6 kgPower Consumption 160 WPower plug type Hybrid E+FPower Supply�� AC 230 V, 50 / 60 Hz

Ordering InformationDH.WHG02018 Homogenizer HG-15D-Unit, 1~2.500 ml, with Remote Controller, without ToolDH.WHG02019 Homogenizer Package, HG-15D-Set-A, with Remote Controller,

HT1018 Tool, CL200 Clamp and ST110 StandPacking Dimension w 580×d 340×h 230 mm, Gross Weight 18 kg

DH.WHG02020 Homogenizer Package, HG-15D-Set-B with Remote Controller, HT1025 Tool, CL200 Clamp and ST110 Stand Packing Dimension w 580×d 340×h 230 mm, Gross Weight 15 kg

Dispersing ToolsDH.WHG02108 Homogenizer Tool, HT1008, Rotor Φ6,1 , Stator Φ8 , 1~50 mlDH.WHG02110 Homogenizer Tool, HT1010, Rotor Φ7,5 , Stator Φ10, 1~100 mlDH.WHG02118 Homogenizer Tool, HT1018, Rotor Φ12,7, Stator Φ18, 10~1.000 mlDH.WHG02125 Homogenizer Tool, HT1025, Rotor Φ17 , Stator Φ25, 50~2.500 ml

Additional Function Accessories※ witeg WiseStir�, WiseTis� Accessories

DH.WOS502020 CL200, Clamp for Stirrer or Homogenizer,Cast Aluminum, Grip Capacity Φ 23 mm for Stand / Rod

DH.WOS501510 ST110, Standard Plate Stand for Stirrer and Homogenizer, Φ 16×h 800 mm Rod, 20×35 cm Plate, with Silicone Pad

DH.WOS501515 ST120, Wide Plate Stand for Stirrer and Homogenizer,Φ 23×h 1000 mm Rod, 30×40 cm Plate, with Silicone Pad

※※ See page 67 for the Specifications of Dispersing Tools and Accessories.

Specification


““witeg””WiseTis��HG-15D Homogenizer with Remote Digital Controller, 2.000~27.000 rpmMicroprocessor Digital-Control and LCD of Speed & Power, 1~2.500 ml, High-Efficiency Dispersing Tools

Clamp (CL200)

Homogenizer(HG-15D-Unit)

Tool(HT1018)


Remote DigitalController

Homogenizer with Remote Digital Controller (HG-15D-Set-B)

■■ Patented Jog-Shuttle Control System■■ CE Certified

Application & Features� Designed for Liquid and Tissue Samples.� Useful for All Dispersing and Homogenizing Applications.� High Speed / High Quality / Low Noise : Max. 27.000 RPM (without load)� Remote Digital Controller : Fully Digital Control Using Microprocessor.� Speed & Power Control Optimized for the Sample.� LCD Display of Speed(RPM) and Power Bar Graph.� High Efficiency Dispersing Tool made of Stainless Steel and PTFE.� Over-Load & Over Heat Protection. � Low Cost & High Efficiency.� Patented Jog-Shuttle Control System.� CE Certified.

www.witeg.de 67

HoHomogenizers, Accessories

DH.WHG02108 (1) Homogenizer Tool, HT1008Rotor Φ 6,1, stator Φ 8, 1~50 ml

DH.WHG02110 (2) Homogenizer Tool, HT1010Rotor Φ 7,5, stator Φ 10, 1~100 ml

DH.WHG02118 (3) Homogenizer Tool, HT1018Rotor Φ 12,7, stator Φ 18, 10~1.000 ml

DH.WHG02125 (4) Homogenizer Tool, HT1025Rotor Φ 17, stator Φ 25, 50~2.500 ml

Additional Function Accessories� WiseStir�, WiseTis� Accessories

DH.WOS502020 (5) High Quality Clamp, CL200,Cast Aluminum, Grip Capacity, Φ 23 mm for Stand / Rod

DH.WOS501510 (6) Standard Plate Stand, ST110, for Stirrer and HomogenizerΦ 16×h 800 mm Rod, RD501, 20×35 cm Plate, with Silicone Pad

DH.WOS501515 (7) Wide Plate Stand, ST120, for Stirrer and HomogenizerΦ 23×h 1.000 mm Rod, RD522, 30×40 cm Plate, with Silicone Pad

(6) Standard Plate Stand (ST110) (7) Wide Plate Stand (ST120)

(4) Dispersing Tool (HT1025)




1~50 ml 1~100 ml

10 ~1.000 ml 10~2.500 ml

Stainless Steel Rods

Steel Retort Base Duo Stand

““witeg””WiseStir�� High-Quality, Stainless Steel (#304) Rod for Plate Stand, Φ16 / 23 mm

DH.WOS502001 Stainless steel Rod, RD501, Φ16×h 800 mm, non-screwDH.WOS502002 Stainless steel Rod, RD502, Φ16×h 1.000 mm, non-screwDH.WOS502003 Stainless steel Rod, RD503, Φ16×h 1.200 mm, non-screw

DH.WOS502011 Stainless steel Rod, RD511, Φ16×h 800 mm, screwDH.WOS502012 Stainless steel Rod, RD512, Φ16×h 1.000 mm, screwDH.WOS502013 Stainless steel Rod, RD513, Φ16×h 1.200 mm, screw

DH.WOS502021 Stainless steel Rod, RD521, Φ23×h 800 mm, screwDH.WOS502022 Stainless steel Rod, RD522, Φ23×h 1.000 mm, screwDH.WOS502023 Stainless steel Rod, RD523, Φ23×h 1.200 mm, screw

Model HT1008 (1) HT1010 (2) HT1018 (3) HT1025 (4)

Working Range 1 ~ 50 ml 1 ~ 100 ml 10 ~ 1.000 ml 50 ~ 2.500 mlStator Diameter 8 mm 10 mm 18 mm 25 mmRotor Diameter 6,1 mm 7,5 mm 12,7 mm 17 mm

Gap between Rotor and Stator 1,9 mm 2,5 mm 5,3 mm 8 mm

Allowable Speed Max. 27.000 rpm 20.000 rpm 15.000 rpmImmersion Depth Min. 35 mm 60 mmImmersion Depth Max 70 mm 130 mmShaft Length 138 mm 225 mmBearing Material PTFESuitable for Solvent YesMax. Temperature 180 ℃Sterilization Method All MethodsSuspensions 10 ~ 50 ㎛Emulsions 1 ~ 10 ㎛

Steel Retort Base Duo Stand, up to Φ16 ㎜ Rods, for 2 RodsNonskid Feet equipped, with Hinged Screw M6, Rod Excluded

� Can Fix Rods up to 2 ea (Below Φ 16 mm) � Stand Thickness : 8 mm

Ordering InformationUS.2040 Stand, US2040, r =150 mmUS.2041 Stand, US2041, r =185 mm

r

(5) High Quality Clamp (CL200)

Homogenizaer Accessories, Dispersing Tools & Plate Stand forWiseStir�&WiseTis�

■■ Accurate Stator && Rotor made of Stainless Steel■■ High Efficiency Dispersing Tool made of Stainless Steel and PTFE■■ Low Cost & High Efficiency

** TTeesstt CCoonnddiittiioonn :: 11,,88 lliitteerrss ooff wwaatteerr iinn tthhee 22 lliitteerrss ccaappaacciittyy bbeeaakkeerr..


Homogenizers, Homogenizing StirrerHo

Ordering InformationStirrer Unit OnlyDH.WOS01010 Homogenizing Stirrer, HS-30E-Unit Only, 200~5.000 rpm

DH.WOS01011 Homogenizing Stirrer Package, HS-30E-Set, with CL200 Clamp and ST110 Standard Plate StandPacking Dimension w 320×d 300×h 190 mm, Gross Weight 10 kg

Specification


““witeg””WiseStir��HS-30E Homogenizing Stirrer, for Use with Tissue GrindersAnalog Phase Control, 200~5.000 rpm

Analog PhaseControl

Clamp (CL200)


For Use with Tissue Grinders(Tissue Grinder not Included)

Homogenizing Stirrer (HS-30E-Set)

■■ Ideal for usage with Tissue Grinders■■ Over Heat Protection■■ CE Certified

Application & Features� Designed for Most Laboratory Applications such as Homogenizing or Mixing.� Compact Unit with Solid State Speed Control.� Ideal for usage with Tissue Grinders.� Over Heat Protection.� CE Certified.

Homogenizing Stirrer(HS-30E)

Model HS -30E

Dimension (w××d××h) (mm) 90×145×180

Speed Range 0 ~ 5.000 rpm

Maximum Torque 85 Ncm

Stirring Quantity Max. 10 Lit.

Motor Rating (Input / Output) 83 / 75 W (1 / 10 HP)

Controller Analog Phase Controller

Safety Device Over Heat Protector

Weight 3,5 kg

Others CE Certified

Packing Dimension (w××d××h) (mm) 320×300×190

Gross Weight 5 kg



Power Supply��

AC 230 V, 50 / 60 Hz

※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ggrriinnddeerrss iinn oouurr ggeenneerraall ccaattaalloogguuee oonn ppaaggee :: 330077

※ Note!The Package does not Include a Tissue Grinder

●● Hotplates ●● Hotplate Stirrers

HP-20D

MSH-20D-Set

MSH-55A

69

MSH-50D-Set

- Smart Design of Body.- Superior Temperature Uniformity.- Long Life Power & Mechanism.- High Stability in Very Low & High-Speed/-Temperature.

The World Best Qualitywith Cost-Effectiveness!!

▶▶Compact & Round Plate TypeHotplate Stirrers

▶▶Digital Hotplate

▶▶Analog Hotplate Stirrer

▶▶Digital Hotplate Stirrer

WiseStir��

& WiseTherm��

Hotplates& Stirrers

Hotplates& Stirrers

MSH-20A

www.witeg.de


HotplatesHo

Model HP-20A HP-30A

Plate Size (mm) 180×180 260 ×260

Temp. Range Max. 380 ℃

Heating Power 600 W 1.000 W

Controller Superior Linearity PWM Controller

Heating PlateSpecially Designed Heating Module

(High Uniformity : Temp. Difference 10 % less)

Permissible Ambient Temperature Ambient +5 ~ 50 ℃

Permissible Relative Moisture 85 %

MaterialPlate Ceramic Coated Aluminum (Chemical / Acid Resistance)

Body Powder Coated Aluminum Powder Coated Steel

Dimension (w××d××h) (mm) 206×307×99 286×387×99

Weight 2,8 kg 3,3 kg

Others CE Certified

Packing Dimension (w××d××h) (mm) 400×280×200 430×320×200

Gross Weight 5 kg

Power Consumption 600 W 1 kW



Specification

Premium Hotplate (HP-20A)

Premium Hotplate, Large Type (HP-30A)

““witeg””WiseTherm��HP-20A/HP-30A Premium Hotplate, Ceramic-Coated Plate up to 380 ℃, 180×180 mm / 260×260 mm

■■ Excellent for Sample Drying and Most General Lab Heating Applications■■ Superior Temperature Uniformity : Less than 10 % on the Plate at

Ambient Temperature■■ CE Certified

Application & Features� Excellent for Sample Drying and most General lab Heating Applications.� Smart Design of Body made by Aluminum Die-Casting. (HP-20A)� Superior Temperature Uniformity : Less than 10 % on the Plate at Ambient Temperature.� Superior Linearity for Control Temperature by Specially Designed Control Circuitry. (PWM control)� Ceramic Coated Plate - Chemical / Acid Resistance.� CE Certified.

Ordering InformationDH.WHP03120 Hotplate, HP-20A, 180×180 mm, Max. 380 ℃DH.WHP03121 Hotplate, HP-30A, 260×260 mm, Max. 380 ℃

Additional Function AccessoriesDH.WHP503011 Stand Rod, RD100, Stainless Steel,

Φ12,7×450 mm, for HP-30A / 30D, MSH-30A / 30DDH.WHP503036 Stand Rod, RD200, Stainless Steel,

Φ12×L450 mm, for HP-20A / 20D, MSH-20A / 20DMSH-50A / 55A, MSH-50D / 55D and SMHS

DH.WHP503012 Holder + Clamp, CL220, for Temperature Sensor


180 mm

PWM ControlSystem

Ceramic CoatedPlate

180 mm

260 mm260 mm

~380℃

~380℃

※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg bbeeaakkeerrss aanndd ffllaasskkss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 3333,, 3344,, 229933--229966..

※※ YYoouu wwiillll ffiinndd mmaattcchhiinngg ssttiirrrriinngg bbaarrss iinn oouurr ggeenneerraall ccaattaalloogguuee aatt ffoolllloowwiinngg ppaaggeess :: 336622,, 336633..

www.witeg.de 71

HoHotplates

Model HP-LP1 HP-LP2

Plate Surface Ceramic-Coated Anodized

Plate Size 310×620 mm

Temp.Range Max. 320 ℃

Accuracy ±0,3 ℃ at Set Temperature (< 70 ℃)

Temp. Display Resolution 0,1 ℃

Temp. Control Resolution 0,5 ℃

Heating Power 2 kW





ControllerDigital PID Controller with Jog Shuttle Switch (Turn + Push)

Remote Controller Available

Display Digital LCD Display (Temp., Timer)

Timer 99 hr 59 min (Continuous Function Included)

Dimension (w××d××h) (mm) 670×360 ×150

Weight 12.2 kg

Others

CE Certified, Storage Function (Temp., Timer)Locking Mode (Jog-Shuttle Input disabled)

User Self-compensation functionAlarm (Error Status and Timer-end)

Power Consumption 2 kW


Gross Weight 14 kg



Large Digital Hotplate (HP-LP1)

““witeg””WiseTherm��HP-LP Large Digital Hotplate, Anodized or Ceramic-Coated PlateBuilt-in Digital PID Controller or Remote Controller, Superior Temperature Unformity, 310×620 mm, up to 320 ℃

620 mm

Ceramic CoatedPlate

310 mm

Specification


■■ Superior Temperature Uniformity : Less than 10 % on the Plate atAmbient Temperature

■■ Digital PID Controller■■ Patented Jog-Shuttle Control System and Back-Light LCD Display■■ CE Certified

Application & Features� Excellent for Sample Drying and most General lab Heating Applications.� Large Heating Area : Ideal for TLC Plate Heating and Surface Heating in Electronic Industries.� Superior Temperature Uniformity : Less than 10 % on the Plate at Ambient Temperature.� Ceramic Coated Plate -Chemical /Acid Prevention. (HP-LP1)� Anodized Plate - Scratch Resistance. (HP-LP2)� The Remote Controller Cable helps to put the Controller away from the Hotplate up to 1.5m distance.� Maximum Temperature of 320 ℃� Digital PID Control.� Patented Jog-Shuttle Control System and Back-Light LCD Display. � CE Certified.

Ordering InformationLarge Digital Hotplate, Built-in Digital PID ControllerDH.WHP03024 Large Digital Hotplate, Ceramic-Coated, HP-LP1, 620×310 mm, 320 ℃DH.WHP03027 Large Digital Hotplate, Anodized, HP-LP2, 620×310 mm, 320 ℃

Large Digital Hotplate, Separated Remote ControllerDH.WHP03025 Large Digital Hotplate, Ceramic-Coated, HP-LP-C-Set

620×310 mm, 320 ℃, Digital Remote ControllerPacking Dimension w 750×d 430×h 220 mm, Gross Weight 20 kg

DH.WHP03028 Large Digital Hotplate, Anodized, HP-LP-A-Set620×310 mm, 320 ℃, Digital Remote ControllerPacking Dimension w 750×d 430×h 220 mm, Gross Weight 20 kg

Patented Jog-ShuttleControl System

Large Digital Hotplate with Remote Controller (HP-LP-A-Set)

620 mm

AnodizedPlate

Remote Controller

310 mm

1,5 m Cable




~320℃

~320℃


HotplatesHo


260 mm260 mm

~380 ℃

Model HP- 20D HP- 30D

Plate Size (mm) 180×180 260×260


Accuracy ±0,3 ℃ at Set Temperature (< 70 ℃)

Temp. Display Resolution 0,1 ℃

Temp. Control Resolution 0,5 ℃

Heating Power 600 W 1 kW


(High Uniformity : Temp. Difference 10% less)

Permissible Ambient Temperature

Ambient +5 ~ 50 ℃


Controller Digital Feedback Controller with Jog Shuttle Switch (Turn + Push)


Timer 99 hr 59 min (Continuous Function Included)

MaterialPlate Ceramic Coated Aluminum (Chemical / Acid Resistance)


Dimension (w××d××h) (mm) 206×307 ×99 286×387×99

Weight 2,8 kg 3,2 kg

Others

CE CertifiedStorage Function (Temp., Timer)

Locking Mode (Jog-Shuttle Input Disabled)User Self - compensation Function

Alarm (Error Status and Timer -end)



Gross Weight 5 kg



Specification

Digital Precise Hotplate (HP-20D-Set)

Digital Precise Hotplate, Large Type (HP-30D)

““witeg””WiseTherm��HP-D Digital Precise Hotplate, Ceramic-Coated PlateDigital Feedback Control, Back Light LCD, up to 380 ℃, ±0,3 ℃, 180×180 mm /260×260 mm


Holder+Clamp(CL220)

Temp. Sensor(SS220)

Rod (RD200)

180 mm180 mm

Back Light LCD Patented Jog-ShuttleControl SystemPatented Jog-ShuttleControl System


Application & Features� Digital Feedback Control by High-Performance Microprocessor.� Smart Design of Body made by Aluminum Die-Casting. (HP-20D)� Ceramic Coated Plate-Chemical/Acid Resistance.� Superior Temperature Uniformity : 10 % less on the Plate at Ambient Temperature.� Accurate Temp. Control of the Sample in the Vessel using Optional PT100 Sensor.� Digital LCD Display with Back-Light Function.� Digital Timer Function Included : 99 hr 59 min Settable.� Storage Function for the Set Values : Temp. and Timer.� Locking Mode for Experimental Safety Supported. (Input to Jog Shuttle can be disabled)� User’s Self-Compensation Function : to Control Difference between Real Temp. and Indicated

Temp. (±10.0 ℃)� Alarm Function : Error Status and Timer-End.� Patented Jog-Shuttle Control System.� CE Certified.

Ceramic CoatedPlate

~380℃

www.witeg.de 73

HoHotplates


HP-20D Hotplate Unit & Package SetDH.WHP03020 Digital Hotplate, HP-20D-Unit Only, 180×180 mm, to 380 ℃DH.WHP03021 Digital Hotplate Package, HP-20D-Set

with SS200 External Temp. Sensor, RD200 Support Rod and CL220 ClampPacking Dimension w 400×d 280×h 200 mm, Gross Weight 5 kg

HP-30D Hotplate Unit & Package SetDH.WHP03022 Digital Hotplate, HP-30D-Unit Only, 260×260 mm, to 380 ℃DH.WHP03023 Digital Hotplate Package, HP-30D-Set

with SS100 External Temp. Sensor,RD100 Support Rod and CL220 ClampPacking Dimension w 430×d 320×h 200 mm, Gross Weight 5 kg

Additional Function AccessoriesDH.WHP503020 Direct Contact Temperature Sensor, SS100,

PT100�, for HP-30D, MSH-30D and SMHSDH.WHP503021 Direct Contact Temperature Sensor, SS110,

PT100�, Teflon Coated, for HP-30D, MSH-30D and SMHS

DH.WHP503030 Direct Contact Temperature Sensor, SS200, PT100�, for HP-20D, MSH-20Dand MSH-50D / 55D

DH.WHP503031 Direct Contact Temperature Sensor, SS210, PT100�, Teflon Coated, for HP-20D, MSH-20D and MSH-50D / 55D

DH.WHP503011 Stand Rod, RD100, Stainless Steel, Φ 12,7×450 mm, for HP-30A/30D, MSH-30A / 30D

DH.WHP503036 Stand Rod, RD200, Stainless Steel, Φ 12×L 450 mm, for HP-20A/20D, MSH-20A / 20D, MSH-50A / 55A, MSH-50D/55D and SMHS

DH.WHP503012 Holder +Clamp, CL220, for Temp. Sensor

�PT100 : External Sensor for Feedback Control of the Temperature in the Vessel, Accuracy of ±0.3 ℃

<Teflon Coated PT100 Sensor : SS110/SS210>

<Temp. PT100 Sensor : SS100/SS200>

<Stand Rod:RD100/RD200>


<Continued from...““witeg””WiseTherm��HP-D Digital Precise Hotplate >



Hotplates StirrersHo

Model MSH-20A MSH-30A

Plate Size (mm) 180×180 260×260Stirring Capacity (H2O) Max. 20 Lit.

Motor Rating 9 / 4W

Speed Range Max. 1.500 rpm


Heating Power 600 W 1.000 W

Controller Superior Linearity PWM Controller





Max. Length of Stirring Bar 50 mm

MaterialPlate Ceramic Coated (Chemical / Acid Resistance)


Dimension (w××d××h) (mm) 206×307×99 268×387×99Weight 2,8 kg 3,3 kg

Others CE Certified


Gross Weight 5 kg




SpecificationPremium Hotplate Stirrer (MSH-20A)

Premium Hotplate Stirrer, Large Type (MSH-30A)

““witeg””WiseStir��MSH-A Premium Hotplate Stirrer, Ceramic-Coated PlatePWM Control System, Superior Temperature Uniformity, Precise Contol of Temp. &RPM, up to 380 ℃, 1.500 rpm, 180×180 mmor 260×260 mm


■■ Superior Linearity for the Control of Temperature & Stirring Speed■■ Ceramic Coated Plate-Chemical / Acid Resistance■■ CE Certified

Application & Features� Excellent for Sample Drying and most General Lab Heating Applications.� Superior Temperature Uniformity : Less than 10 % on the Plate at Ambient Temperature. � Superior Linearity for Temperature Control & Stirring Speed by Specially Designed

Control Circuitry. (PWM Control)� Smart Design of Body made by Aluminum Die-Casting. (MSH-20A)� Ceramic Coated Plate-Chemical /Acid Resistance.� Maximum Temperature of 380 ℃� CE Certified.

Ordering InformationMSH-20A Hotplate StirrerDH.WMH03120 Hotplate Stirrer, MSH-20A, 180×180 mm,

0~1.500 rpm, to 380℃

MSH-30A Hotplate StirrerDH.WMH03121 Hotplate Stirrer, MSH-30A, 260×260 mm,

0~1.500 rpm, to 380℃


Φ 12,7×450 mm, for HP-30A / 30D, MSH-30A / 30DDH.WHP503036 Stand Rod, RD200, Stainless Steel,

Φ 12×L 450 mm, for HP-20A / 20D, MSH-20A / 20DMSH-50A / 55A, MSH-50D / 55D and SMHS

DH.WHP503012 Holder +Clamp, CL220, for Temperature Sensor


180 mm

PWM ControlSystem

Ceramic CoatedPlate

180 mm

~380℃ / 1.500rpm

260 mm260 mm

~380℃ / 1.500rpm



www.witeg.de 75

HoHotplates Stirrers


■■ Superior Linearity for the Control of Temperature & Stirring Speed■■ Ceramic Coated Plate (MSH-50A) for Chemical/Acid Resistance or

Anodized Plate (MSH-55A) for Scratch Prevention■■ CE Certified

Application & Features� Excellent for Sample Drying and most General Lab Heating Applications.� Superior Temperature Uniformity : Less than 10 % on the Plate at Ambient Temperature.� Superior Linearity for Temperature Control & Stirring Speed by Specially Designed

Control Circuitry. (PWM Control)� Smart Design of Body made by Aluminum Die-Casting. � Ceramic Coated Plate (MSH-50A) for Chemical/Acid Resistance or Anodized Plate (MSH-55A)

for Scratch Prevention.� Maximum Temperature of 380 ℃� CE Certified.

Specification

Premium Compact Hotplate Stirrer,Round Type & Anodized Plate

(MSH-55A)

““witeg””WiseStir��MSH-50A Premium Compact Hotplate Stirrer, Round-Type Plate, Φ135 ㎜Ceramic Coated or Anodized Plate, Superior Temperature Uniformity, Precise Control of Temp. & RPM, up to 380 ℃, 1.500 rpm

Ordering InformationMSH-50A Hotplate StirrerDH.WMH03150 Hotplate Stirrer, MSH-50A, Φ135 mm, Ceramic Coated Plate,

0~1.500 rpm, to 380 ℃

MSH-55A Hotplate StirrerDH.WMH03155 Hotplate Stirrer, MSH-55A, Φ135 mm, Anodized Plate,

0~1.500 rpm, to 380 ℃


Φ 12×L 450 mm, for HP-20A / 20D, MSH-20A / 20DMSH-50A/55A, MSH-50D / 55D and SMHS

DH.WHP503012 Holder +Clamp, CL220, for Temperature Sensor


PWM ControlSystem

Anodized PlateΦΦ135 mm

Premium Compact Hotplate Stirrer,Round Type & Ceramic-Coated Plate

(MSH-50A)

Ceramic Coated Plate

Model MSH-50A MSH-55A

Plate Size (mm) Φ 135 Stirring Capacity (H2O) Max. 20 Lit.Motor Rating 9 / 4 WSpeed Range Max. 1.500 rpm


Heating Power 350 WController Superior Linearity PWM Controller



Fixed Safety Circuit 380 ℃


Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mm

MaterialPlate Ceramic Coated AnodizedBody Powder Coated Aluminum

Dimension (w××d××h) (mm) 160×280×95Weight 2,3 kgOthers CE Certified


Gross Weight 4 kgPower Consumption 350 WPower plug type Hybrid E+F


~380 ℃/ 1.500 rpm






Model MSH-20D MSH-30D

Plate Size (mm) 180×180 260×260

Stirring Capacity (H2O) Max. 20 Lit.Motor Rating 9 / 4 WSpeed Range 80 ~ 1.500 rpmSpeed Control Resolution 5 rpm

Temp.Range Max. 380 ℃Accuracy ±0,3 ℃ at Set Temperature (< 70 ℃)

Temp. Display Resolution 0,1 ℃Temp. Control Resolution 0,5 ℃Heating Power 600 W 1.200 W

Heating Plate Specially Designed Heating Module (High Uniformity : Temp. Difference 10 % less)


Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mmController Digital Feedback Controller with Jog Shuttle Switch (Turn + Push)Display Digital LCD Display with Back-Light FunctionTimer 99 hr 59 min (Continuous Function Included)

MaterialPlate Ceramic Coated Aluminum (Chemical / Acid Resistance)Body Powder Coated Aluminum Powder Coated Steel


Others

CE CertifiedStorage Function (Temp., RPM, Timer)

Locking Mode (Jog-Shuttle Input Disabled)User Self -compensation Function

Alarm (Error Status and Timer-end)

Power Consumption 600 W 1,2 kW


Gross Weight 5 kgPower plug type Hybrid E+FPower Supply * AC 230 V, 50 / 60 Hz

Specification

Digital Precise Hotplate (MSH-20D-Set)

““witeg””WiseStir��MSH-D Digital Hotplate Stirrer, Ceramic-Coated Plate, up to 380 ℃, ±0,3 ℃Digital Feedback Control, Accurate Temperature Control, 180×180 mm / 260×260 mm, 80 ~ 1.500 rpm


Holder+Clamp(CL220)

Temp. Sensor(SS220)

Rod (RD200)

180 mm180 mm

Back Light LCD Patented Jog-ShuttleControl System


Application & Features� Digital Feedback Control by High-Performance Microprocessor.� Superior Temperature Uniformity : 10 % less on the Plate at Ambient Temperature. � Accurate Temp. Control of the Sample in the Vessel Using Optional PT100 Sensor.� User’s Self -Compensation Function : to Control Difference between Real Temp.

and Indicated Temp. (±10,0 ℃)� Digital LCD Display with Back-Light Function. � Aluminum Die -Casting Body. (MSH-20D)� Ceramic Coated Plate-Chemical /Acid Resistance.� Storage Function : Timer and Alarm.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)� Patented Jog-Shuttle Control System.� CE Certified.

Ceramic CoatedPlate

~ 380℃/ 80~1.500rpm

260 mm260 mm

~380 ℃ / 80~1.500 rpm

Digital Precise Hotplate, Large Type (MSH-30D)

www.witeg.de


77

Ordering InformationMSH-20D Hotplate Stirrer Unit & Package SetDH.WMH03020 Digital Hotplate Stirrer, MSH-20D-Unit Only,

180×180 mm, 80~1.500 rpm, to 380 ℃DH.WMH03021 Digital Hotplate Stirrer Package, MSH-20D-Set

with SS200 External Temp.Sensor, RD200 Support Rod and CL220 ClampPacking Dimension w 400×d 280×h 200 mm, Gross Weight 5 kg

MSH-30D Hotplate Stirrer Unit & Package Set DH.WMH03022 Digital Hotplate Stirrer, MSH-30D-Unit Only,

260×260 mm, 80~1.500 rpm, to 380 ℃DH.WMH03023 Digital Hotplate Stirrer Package, MSH-30D-Set

with SS100 External Temp. Sensor, RD100 Support Rod and CL220 ClampPacking Dimension w 430×d 320×h 200 mm, Gross Weight 5 kg


PT100��, for HP-30D, MSH-30D and SMHSDH.WHP503021 Direct Contact Temperature Sensor, SS110,

PT100��, Teflon Coated, for HP-30D, MSH-30D and SMHS

DH.WHP503030 Direct Contact Temperature Sensor, SS200, PT100��, for HP-20D, MSH-20D and MSH-50D / 55D

DH.WHP503031 Direct Contact Temperature Sensor, SS210, PT100��, Teflon Coated, for HP-20D, MSH-20D and MSH-50D / 55D

DH.WHP503011 Stand Rod, RD100, Stainless Steel, Φ 12,7×L 450 mm, for HP-30A / 30D, MSH-30A / 30D

DH.WHP503036 Stand Rod, RD200, Stainless Steel, Φ 12×L 450 mm, for HP-20A / 20D, MSH-20A / 20D, MSH-50A / 55A, MSH-50D / 55D and SMHS

DH.WHP503012 Holder +Clamp, CL220, for Temp. Sensor

�PT100 : External Sensor for Feedback Control of the Temperature in the Vessel, Accuracy of ±0,3 ℃

<Continued from...““witeg””WiseStir��MSH-D Digital Hotplate Stirrer>

<Teflon Coated PT100 Sensor : SS110/SS210>








SpecificationModel MSH-50D MSH-55D

Plate Size (mm) Φ 135 Stirring Capacity (H2O) Max. 20 Lit.Motor Rating 9 / 4 WSpeed Range 80 ~ 1.500 rpmSpeed Control Resolution 5 rpm


Accuracy ±0,3 ℃ at Set Temperature (< 70 ℃)Temp. Display Resolution 0,1 ℃Temp. Control Resolution 0,5 ℃Heating Power 350 W

Heating Plate Specially Designed Heating Module (High Uniformity : Temp. Difference 10 % less)

Fixed Safety Circuit 380 ℃


Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mmController Digital Feedback Controller with Jog Shuttle Switch (Turn+Push)Display Digital LCD Display with Back-Light FunctionTimer 99 hr 59 min (Continuous Function Included)

MaterialPlate Ceramic Coated AnodizedBody Powder Coated Aluminum

Dimension (w××d××h) (mm) 160 × 280× 95Weight 2,3 kg

Others

CE CertifiedStorage Function (Temp., RPM, Timer)

Locking Mode (Jog-Shuttle Input Disabled)User Self-compensation Function

Alarm (Error Status and Timer-end)


Gross Weight 4 kgPower Consumption 350 WPower plug type Hybrid E+F

Power Supply * AC 230 V, 50 / 60 Hz

Digital Compact Hotplate Stirrer,Round Type & Ceramic-Coated Plate (MSH-50D-Set)

““witeg””WiseStir��MSH-50D Digital Compact Hotplate Stirrer, Round-Type Plate,Φ135 ㎜Ceramic Coated or Anodized Plate, Digital Feedback Control, Back Light LCD, up to 380 ℃, ±0,3 ℃, 80 ~ 1.500 rpm


■■ Digital Feedback Control by High-Performance Microprocessor■■ Ceramic Coated Plate (MSH-50D) for Chemical/Acid Resistance or

Anodized Plate (MSH-55D) for Scratch Prevention■■ Patented Jog-Shuttle Control System■■ CE Certified

Application & Features� Digital Feedback Control by High-Performance Microprocessor.� Superior Temperature Uniformity : 10 % less on the Plate at Ambient Temperature. � Accurate Temp. Control of the Sample in the Vessel Using Optional PT100 Sensor.� User’s Self -Compensation Function :

To Control Difference between Real Temp. and Indicated Temp. (±10,0 ℃)� Digital LCD Display with Back-Light Function.� Ceramic Coated Plate (MSH-50D) for Chemical/Acid Resistance or Anodized Plate (MSH-55D)

for Scratch Prevention.� Aluminum Die -Casting Body. � Storage Function : Timer & Alarm.� Locking Mode Supported for Experimental Safety. (Input to Jog-Shuttle can be Disabled)� Patented Jog-Shuttle Control System.� CE Certified.

Back Light LCD

Holder+Clamp(CL220)

Temp. Sensor(SS200)

Rod (RD200)

Ceramic-CoatedPlate, ΦΦ135 mm






~380℃/ 80~1.500rpm

www.witeg.de 79


Ordering InformationMSH-50D Hotplate Stirrer Unit & Package SetDH.WMH03050 Digital Hotplate Stirrer, MSH-50D-Unit,

Ceramic-Coated, Φ 135 mm, 80~1.500 rpm, to 380 ℃DH.WMH03051 Digital Hotplate Stirrer Package, MSH-50D-Set


MSH-55D Hotplate Stirrer Unit & Package SetDH.WMH03055 Digital Hotplate Stirrer, MSH-55D-Unit,

Anodized, Φ135 mm, 80~1.500 rpm, to 380 ℃DH.WMH03056 Digital Hotplate Stirrer Package, MSH-55D-Set



PT100�, for MSH-50D / 55DDH.WHP503061 Direct Contact Temperature Sensor, SS510,

PT100�, Teflon Coated, for MSH-50D / 55DDH.WHP503036 Stand Rod, RD200, Stainless Steel, Φ12×L 450 mm,

for HP-20A / 20D, MSH-20A / 20D, MSH-50A / 55A,MSH-50D / 55D and SMHS

DH.WHP503012 Holder+Clamp, CL220, for Temp. Sensor

�PT100 : External Sensor for Feedback Control of the Temperature in the Vessel, Accuracy of ±0,3 ℃

Digital Compact Hotplate Stirrer,Round Type & Anodized Plate

(MSH-55D)

AnodizedPlate

<Teflon Coated PT100 Sensor : SS510>

<Temp. PT100 Sensor : SS500>

<Stand Rod:RD200>


<Continued from...““witeg””WiseStir��MSH-50D Digital Compact Hotplate Stirrer >

~380 ℃ / 80~1.500 rpm



Model SMHS-3 : 3 Places SMHS-6 : 6 Places

Number of Places 3×1 Places 3×2 PlacesStirring Capacity (H2O) Max. 20Lit.Motor Rating (9 / 4 W)×3 (9 / 4 W)×6Speed Range 80 ~ 1.500 rpmSpeed Control Resolution 5 rpm

Temp.Range Max. 350 ℃Accuracy ±0,3 ℃ at Set Temperature (< 70 ℃)

Temp. Display Resolution 0,1 ℃Temp. Control Resolution 0,5 ℃Heating Power 400 W / Place (Total 1,2 kW) 400 W / Place (Total 2,4 kW)

Heating Plate Specially Designed Heating Module (High Uniformity : Temp. Difference less than 10 %)

Permissible AmbientTemperature Ambient +5 ~ 50 ℃

Permissible Relative Moisture 85 %Max. Length of Stirring Bar 50 mmController Digital Feedback Controller with Jog Shuttle Switch (Turn+Push)Display Digital LCD Display with Back-Light FunctionTimer 99 hr 59 min (Continuous Function Included)Plate Size (mm) 140×140

MaterialPlate Ceramic Coated AluminumBody Powder Coated Steel


OthersCE Certified

Storage Function (Temp., RPM, Timer)Locking Mode (Jog-Shuttle Input Disabled)

Power Consumption 1,5 kW 3 kWPacking Dimension (w××d××h) (mm) 540×330×170 570×540×230

Gross Weight 10 kg 18 kgPower plug type Hybrid E+FPower Supply

��

AC 230 V, 50 / 60 Hz



““witeg””WiseStir��SMHS Systematic Multi-Hotplate Stirrers, 3-/6- Places, Ceramic-Coated PlatesDigital Feedback Control, Back Light LCD, Independent Heating & Stirring Control, up to 350 ℃ / 1.500 rpm

Back Light LCD

140 mm140 mm


Systematic Multi-Hotplate Stirrers,3××1 Ceramic-Coated Plates (SMHS-3)

■■ Excellent for Multi-use and a Wide Various Sample Testing■■ Patented Jog-Shuttle Control System■■ CE Certified

Application & Features� Excellent for Multi-use and wide range of Sample Testing.� Systemized 3 and 6-Hotplate Stirrer. � Independent Heating and Stirring Control.� Digital Feedback Control by High-Perfomance Microprocessor.� Ceramic Coated Plate-Chemical/Acid Resistance.� Maximum Temperature of 350 ℃ with ±0,3 ℃ Control Accuracy.� Accurate Temp. Control of the Sample in the Vessel using Optional PT100 Sensor.� Digital LCD Display with Back-Light Function.� Digital Timer Function Included : 99 hr 59 min.� Storage Function for the Set Values : Temperature, RPM and Timer.� Locking Mode for Experimental Safety Supported.� Patented Jog-Shuttle Control System.� CE Certified.

Back Light LCD

140 mm140 mm

Systematic Multi-Hotplate Stirrers,3××2 Ceramic-Coated Plates (SMHS-6)



Specification

<Teflon Coated PT100 Sensor :SS110/SS210>







Ordering Information3×Hotplate Stirrer, 3×1 PlacesDH.WMH03503 1×3 Hotplate & Stirrer, SMHS-3, 3 Position,

510×240×100 mm, 140×140 mm, to 350 ℃

6×Hotplate Stirrer, 3×2 PlacesDH.WMH03506 2×3 Hotplate & Stirrer, SMHS-6, 6 Position,

510×410×180 mm, 140×140 mm, to 350 ℃

Additional Function AccessoriesDH.WHP503020 Direct Contact Temperature Sensor, SS100, PT100��

for HP-30D, MSH-30D and SMHSDH.WHP503021 Direct Contact Temperature Sensor, SS110, PT100��

Teflon Coated, for HP-30D, MSH-30D and SMHSDH.WHP503036 Stand Rod, RD200, Stainless Steel,

Φ12×450 mm, for HP-20D, MSH-20D and SMHSDH.WHP503012 Holder+Clamp, CL220 for Temp. Sensor�PT100 : External Sensor for Feedback Control of the Temperature in the Vessel, Accuracy of±0,3 ℃

~350℃ / 1.500rpm

~350℃ / 1.500rpm



Documents

witeg GER100920-1 - PMI-Labortechnik · Fuzzy Control System 4, 5 - Digital Intelligence, Maximum Efficiency - Autoclaves - Steam Sterilizer WiseClave 8~11 Baths 12~34 Circulation