LoadsLoadCircuitBreaker*

Circuit Breaker*

AuxiliaryBattery

StartBattery

CircuitBreaker*

* Redarc recommend Manual Reset Circuit Breakers however fuses are acceptable. When using fuses make sure that the fuse makes a good low resistance connection. Circuit Breaker/Fuse ratings are dependent on the type of installation and the size of the loads.

SBI

SBI with External LED SBI with Push Buttonfor Start Assist

MomentaryPushbutton

MomentaryPushbutton

LED

Resistor values: 12V = 1kΩ or 24V = 2k2Ω

SBI with Push Buttonand LED

LED

NO RESISTOR REQUIRED.

OverrideWire

WIRING DIAGRAMCopyright © 2012 Redarc Electronics Pty Ltd. All Rights Reserved.