Wiremold Pathways WIREMOLD.pdf · 2020. 12. 1. · Wiremold cable management systems now fully integrate with Ortronics® technology across a wide range of solutions. These platforms

F E A T U R E D

P R O D U C T S

HIGH PERFORMANCE STRUCTURED CABLING PRODUCTS AND SOLUTIONSHIGH PERFORMANCE STRUCTURED CABLING PRODUCTS AND SOLUTIONS

New Evolution™ Series Poke-Thru DeviceLarge Capacity, recessed poke-thru device provides up to four gangs for power, communications, or A/V devices.

pg. 207

Wiremold® Pathways

Nonmetallic

Raceways

Steel

Raceways

Poke-Thru

Devices

Floor Boxes &

Raised Floor

Solutions

Fire Stop Fittings,

Vertical & Work

Surface Solutions

Wireless &

Zone Cabling

Enclosures

Wiremold/Legrand offers fully integrated cabling infrastructure

solutions that support the entire range of workstation services.

Engineered to provide the highest degree of support for high-

performance cabling, these systems feature bend radius control

to protect UTP and fiber optic cable during lay-in and cable pull

installations – plus a host of installation features developed

through extensive field work with customers.

Wiremold cable management systems now fully integrate

with Ortronics® technology across a wide range of solutions. These

platforms have been modified to seamlessly accept front-loading

TracJack® and Series II® modules for voice, data, audio, and video.

New Evolution™ Series Poke-Thru Devices offer increased capacity with completely

recessed connections and an innovative cover assembly for maximum device protection.

HIGH PERFORMANCE STRUCTURED CABLING PRODUCTS AND SOLUTIONSHIGH PERFORMANCE STRUCTURED CABLING PRODUCTS AND SOLUTIONS

P.1964000® Designer Series Raceway

P.1972400 Series Raceway

P.200CableSmart™ 40N2 Series Large Capacity Raceway

P.199Uniduct® & Eclipse™ Series Single-Channel Latching Raceway

P.2005400 Series Large Capacity Dual-Channel Raceway

P.207Furniture Feed Poke-Thru Devices

P.208Recessed Floor Boxes & FloorPort™ Flanged Cover Assembliesn RFB4 Seriesn RFB9 Seriesn RFB11 Series

Data-Fense Secure Raceway SystemSecure raceway systems used to secure network deployments and provide a high level of modularity and scalability.

pg. 198

Zone Cabling EnclosuresA full line of ceiling and raised floor enclosures which support integrated zone systems.

pg. 202

P.207Evolution™ Series Poke-Thru Devices

NEW

NEW

P.210FlameStopper™ Thru-Wall & Thru-Floor Fittings

P.214Vista™ Architectural Columns &Tele-Power Poles

Power & Data Quality

P.202Zone Cabling & Wireless Access Point Enclosures & Brackets

P.206Walkerflex® Modular Wiring Systems

P.211n Power Commander®n Plug-In Outlet

Center® Unitsn MeterReader™

P.198Data-Fense™ Secure Raceway System

P.207Communications Poke-Thru Devices

P.201n deQuorum™

Work Surface Portals

P.209FloorSource™ Series Raised Floor Boxes

196 For additional product availability visit www.wiremold.com or contact sales at 800-621-0049, Option 6

Innovative ProfileDesign allows for more efficient use of raceway capacity and provides 1/3 more wiring capacity than conventional raceways.

Unique Downward- Facing ActivationsRaceway can be loaded with either downward-facing or conventional activations, or a combination of both as needed.

Adjust-to-Fit™ CouplingsAdjust-to-Fit™ couplings provide up to four inches [102 mm] of lateral adjustment, eliminating the need for precision cuts and reducing waste caused by measuring errors.

Cross-Over FeatureBetter utilization of raceway wiring capacity while maintaining separation of services. All fittings are bend radius compliant for fiber optic and UTP/STP cabling and exceed the TIA 569 requirements for communications pathways.

Updated Color PaletteDS4000™ Steel Raceway is available in Designer Ivory, Designer Gray, Matte Black, and Metallic Bronze. Custom colors are also available.

Obstacle-Avoidance FittingsBypass large and small obstacles, as well as small offsets in supporting walls. Small obstacle avoidance fitting also can be used as a transition fitting to other Wiremold® metal raceway systems. Eliminates all barriers to installation.

4000® Designer Series Raceway

Wiremold 4000® Designer Series Raceway is the next generation in innovative surface raceway systems, providing an aesthetically pleasing and functionally superior alternative to existing raceway profiles. DS4000® Series Raceway includes a variety of innovative features and fittings that save installation time, cost less to specify, and provide 1/3 more wiring capacity than conventional box-style raceway profiles.

DS4010A

DS4047MABDS4018

DS4017DS4047C DS4075

DS4015

DS4075A

DS4010B

DS4011 DS4047R DS4047DDSDWNDDSDWNR

DS4010A Entrance End FittingDS4047MAB Single-Channel MAB Device PlateDS4011 Flat ElbowDS4047R Single-Channel Decorator Device PlateDS4018 External ElbowDS4017 Internal ElbowDSDWND Downward Duplex Device PlateDSDWNR Downward Decorator Device PlateDS4047D Single-Channel Duplex Device PlateDS4047C Single-Channel NEMA Device PlateDS4075 Small Obstacle Transition FittingDS4015 Divided Tee FittingDS4075A Offset FittingDS4010B Blank End Fitting

DS4000B Raceway BaseDS4000C Raceway CoverDS4000WC Wire ClipsDS4001 Adjust-to-Fit CouplingDS4006 Seam ClipDS4006B Half Seam Clip/Blank FaceplateDS4014A Backfeed CouplingDS4047DQ Single-Channel Duplex Device PlateDSDWNDQ Downward Duplex Device PlateDSDWNX Crossover KitDS4089 Adapter to 4000 Series RacewayDSTRK Tamper-Resistance Kit640DS DS4000C Cutter650RT Cover Removal Tool

SYSTEM LAYOUT

Additional 4000 Designer Series Raceway Components Available:Key

197For additional product availability visit www.wiremold.com or contact sales at 800-621-0049, Option 6

2400 Series Raceway

V2400 Series Raceway Ideal for use in applications where low profile and small capacity are required. Shown with downward facing device brackets in an office environment.

The V2400 Series Raceway from Wiremold/Legrand is a single compartment raceway for communication or power applications ideal for use in classrooms, offices and hotel applications, or anywhere a small low profile raceway is needed.

V2400D Divided Raceway is a low profile steel raceway for use where a limited number of power and low-voltage cables are required in the same raceway.

V2418DFO

4000 4000 Series Raceway Section4089 Reducing Connector24DWND Downward Duplex Device Bracket24DWNR Downward Decorator Device Bracket2400BC Single-channel Raceway Base & Cover2406 Cover Clip2407 106 Device Bracket & Frame2410C Entrance End Fitting2411FO Radiused Flat Elbow2415FO Radiused Tee Fitting2417FO Radiused Internal Elbow2418FO Radiused External Elbow2448 One-Gang Device Box2448-2 Two-Gang Device Box2451H Back Feed Fitting2489 Side Reducing Connector2686FO Transition Feed Fitting500 500 Series Raceway5744 Extra Deep Box

624 2400 Raceway Base & Cover Cutter640BCK Replacement Blades for 624 Cutter2400WC Wire Clips2400BD Divided Raceway Base2401D Divided Coupling2407-2CM 106 Device Bracket & Frame2407-2TJ 106 Device Bracket & Frame2407-3TJ 106 Device Bracket & Frame2409 Ground Clamp2410A Entrance End Fitting2410B Blank End Fitting2410BD Divided Blank End Fitting2410DFO Bend Radius Compliant Divided

Entrance End Fitting2410FC Full Capacity Entrance End Fitting2411DFO Bend Radius Compliant 90° Elbow2415DFO Bend Radius Compliant Divided Tee2415M Tee2417DFO Bend Radius Compliant

Divided Internal Elbow

2417M Internal Elbow2418M External Corner Coupling2418DFO Bend Radius Compliant

External Elbow2426 Lamp Holder2427GT Duplex Receptacle2427GA Duplex Receptacle2435D Feed Box2444 O ne-Gang Deep Device Box2444D One-Gang Device Box2444D-2A Two-Gang Divided Device Box2444-2 Two-Gang Extra Deep Device Box2444-2LS Two-Gang OTR Device Box2475D 2400 Series Bridge Fitting2686FO Bend Radius Compliant

Transition Feed FittingIG2427GA Isolated Ground Duplex ReceptacleIG2427GT Isolated Ground Duplex ReceptacleCM-EPLA End PlatesS2-EPL End Plates

Additional 2400 & 2400D Series™ Raceway Components Available:Key

NOTES

2400 and 2400D Series Raceways are compatible with 5507 Series™ Faceplates.

Add “V” prefix to part number to indicate ivory color, add “-FW” suffix to indicate Fog White color.

SYSTEM LAYOUT (SINGLE CHANNEL APPLICATION)

2418FO

24DWND24DWNR

2407 Series106 Frame

2448-2

2489

5744

500

2410C

2417FO4000

4089

2451H2448

2411FO

2400BC

2406


Data-Fense™ Secure Raceway

The Data-Fense™ Raceway from Wiremold/Legrand is used to secure network deployments and provide a high level of modularity and scalability without compromising the security of the network. Data-Fense™ Raceway incorporates a patent-pending, structurally interlocking base and cover, as well as a full complement of secure boxes, fittings, and transition channels to adapt to any network configuration or building implementation.

SYSTEM LAYOUT

Key

NOTE 1: Optional FS2R Flamestopper™ System can be used with WSSR-TWV and WSSR-TWH Thru-Wall Fittings to maintain fire rating of wall.

NOTE 2: Optional WSSE-16-24-8 Secure Enclosure shown.

A

BB

CC

AA

C

E

PF

G

NOTE 2 NOTE 1

HL

EE

VZ

U

W

TS

RQ

O

N

MK

DD

GGFF

I

S

J

XY

D

B

– WSSR-ETERM Raceway End termination Unit– WSSR-1018FO Outside 90° Elbow Fitting– WSSR-MB 1 1/2” [38mm] Spacer– WSSR-VO Vertical Offset Fitting– WSSR-C 5’ [1.5m] Secure Raceway Cover– WSSR-B 10’ [3m] Secure Raceway Base– WSSR-1015FOH Horizontal Tee Fitting– WSSR-RED 24” [610mm] Cable Access Box– WSSR-2SB Cable Access Slack Box– WSSR-TWV Vertical Thru-Wall Unit– WSSR-1015FOV Vertical Tee Fitting– WSSR-1011FO Horizontal 90° Elbow Fitting– WSSR-1017FO Inside 90° Elbow Fitting– WSSR-MSB System Access Box– WSSR-DO Vertical Raceway Dropout– WSSE-8-13-2 Work Station Access Box– WSSR-TWH Horizontal Thru-Wall Unit

– 2” Trade Size EMT Conduit Compression Connector – 2” Trade Size EMT Conduit – WSSR-2X2CATW 2” Trade Size Conduit to 2” x 2” [51mm x 51mm] Raceway Adapter – WSSR-2X2RW 10’ [3m] 2” x 2” [51mm x 51mm] Secure Raceway – WSSR-2X2C 2” x 2” [51mm x 51mm] Raceway Coupling – WSSR-2X2MB 2” x 2” [51mm x 51mm] Raceway Mounting Bracket – WSSR-2X2TEE 2” x 2” [51mm x 51mm] Raceway Tee – WSSR-2X2E90 2” x 2” [51mm x 51mm] Raceway 90° Elbow – WSSR-2X2EC 2” x 2” [51mm x 51mm] Raceway End Cap – WSSR-EC 4 3/4” x 1 3/4” [121mm x 44mm] Raceway End Cap – WSSR-CB 4 3/4” x 1 3/4” [121mm x 44mm] Corner Bridge – WSSR-1011FOE45 Horizontal 45° Elbow – WSSR-B1NC 12” [305mm] Raceway Base with No Coupling – WSSR-C1NO 12” [305mm] Raceway Cover with No Overlap – WSSR-B2NC 24” [610mm] Raceway Base with No Coupling – WSSR-B2NO 24” [610mm] Raceway Cover with No Overlap

NEW

ABCDEFGHIJKLMNOPQ

RST

UV

WXYZ

AABBCCDDEEFFGG


Eclipse PN03, PN05 and PN10 Series is a family of single-channel raceways available in Ortronics Fog White. These raceways are perfect for communication and/or power applications. Ideal for classrooms, offices and hotel applications or anywhere a small, low profile raceway is needed. They are specifically designed for workstations and accept Ortronics Series II® and TracJack® devices.

Uniduct® 2700, 2800 & 2900 Series Raceways

The Uniduct 2700, 2800, & 2900 Series Nonmetallic Latching Raceway System is a one-piece single-channel design, ideally suited to route and protect fiber optic, UTP, and and other low-voltage (50V or less) cables in an easy to install and aesthetically pleasing application. The 2800 and 2900 Fiber Optic (FO) fittings maintain a 1 1/4” [32mm] bend radius and are the perfect solution for even the most demanding cabling applications. Uniduct Series Raceway is available in Ivory, White, and Ortronics® Fog White and is paintable using latex paint. Consult the factory for custom color options.

2786, 2886,

or 2986

2715, 2815,

or 2915

2706, 2806,

or 2906

2710B, 2810B, or

2910B

2718, 2818,

or 2918

2715, 2815,

or 2915

CM-MMB-293

2711, 2811,

or 2911

2717, 2817,

or 2917

NM2048

CM2, Series II, Tracjack

2710B, 2810B, 2910B Blank End Fitting2706, 2806, 2906 Cover Clip2715, 2815, 2915 Tee FittingCM-MMB-293 Multimedia Box2718, 2818, 2918 External Elbow2786, 2886, 2986 Drop Ceiling Connector2717, 2817, 2917 Internal Elbow2711, 2811, 2911 Flat ElbowNM2048 Device Box CM2, Series II, Tracjack Communication Device

Key

2700, 2800, 2900 Latching Raceway2811FO, 2911FO Bend Radius

Compliant Flat Elbow2815FO, 2915FO Bend Radius

Compliant Tee Fitting2817FO, 2917FO Bend Radius Compliant

Internal Elbow2818FO, 2918FO Bend Radius Compliant

External Elbow

CM-MMB-291 Multimedia BoxCM-MMB-292 Multimedia BoxNM2044 Extra Deep Device BoxNM2044-2 Two-Gang Extra Deep

Device BoxNM2048 Deep Device BoxNM2048-2 Two-Gang Deep

Device Box

Additional Uniduct Series Raceway Components Available:

The Uniduct design features a co-extruded flexible PVC hinge that prevents cracking and splitting even after numerous openings and closings.

SYSTEM LAYOUT

– Raceway PN03L08, PN03L10, PN05L08, PN05L10, PN10L08, PN10L10– Cover Clip PN03F06, PN05F06, PN10F06– 90° Flat Elbow PN03F11, PN05F11, PN10F11– Tee Fitting PN03F15, PN05F15, PN10F15 – Internal Elbow PN03F17, PN05F17, PN10F17– External Elbow PN03F18, PN05F18, PN10F18– 90° External Elbow PN03F19, PN05F19, PN10F19– Drop Ceiling Connector PN05F86, PN10F86– Entrance End Fitting PN10F21– Two-Gang Power Box PSB2– Two-Gang Power Box PSB1– Three-Gang Power Box PSB3– Communication Box PDB1S2, PDB2TJ, PDB2S2, PDB4TJ, PBB2S2, PBB4TJ– Reducer Adapter PN153R– Blank End Fitting PN03F20, PN05F20, PN10F20

I L

E

H

B

A

N

D J

E

M

G

F

O

SYSTEM LAYOUTKey

Color: To each part number, add “WH” suffix for White finish, “V” for Ivory finish, or “FW” for Fog White finish. When ordering Ortronics inserts, be sure to include the correct color suffix to the Ortronics part number. Standard Ortronics color is Fog White. Add “-88” suffix for White, “-99” suffix for Ivory.

Color: No suffix denotes Ivory finish. Add “WH” suffix for White finish and “FW” suffix for Fog White finish.number. When ordering Ortronics inserts, be sure to include the correct color suffix to the Ortronics part number. Standard Ortronics color is Fog White. Add “-88” suffix for White, or “-99” suffix for Ivory.

C

K

A

BCDEFGHIJKLM

NO

Eclipse™ PN03, PN05 & PN10 Series Raceways


CableSmart 40N2 Series Raceways are dual-channel and provide wire and cable management for data, voice, video, and power applications. For school and office applications, these are highly aesthetic solutions for providing flexibility and accessibility to wire and cable.

5400 Series Raceway

The 5400 Series large capacity nonmetallic raceway provides wire and cable management for data, voice, video, and power applications. The unique Twin Snap™ cover allows complete segregation of access to power and low voltage services for installation flexibility. FiberReady® fittings provide a 2” bend radius. For school and office applications, this is an ideal solution for providing flexibility and accessibility of wire and cable. Available factory prewired.

SYSTEM LAYOUTKey

Color: *Standard color is ivory. For white finish add “WH” suffix.When ordering Ortronics inserts, be sure to include the correct color suffix to the Ortronics part number. Standard Ortronics color is Fog White. Add “-88” suffix for White, “-99” suffix for Ivory.

5450T

5450T* Twin Snap Cover Device Bracket 5400TB* Two-Compartment Base5417FO* 2” Radius Full Capacity Internal Elbow5450A3* Three Device Mounting Bracket5410* End Cap5411FO* 2” Radius Full Capacity Flat Elbow5450* Device Bracket5406A* Cover Clip5400C* Full Width Cover5415* Tee5474* Transition Tap Fitting5418* External Elbow5418FO* 2” Radius Full Capacity External Elbow5400TC* Twin Snap Cover5400TWC* Twin Snap Cover Wire Clip5406T* Twin Snap Cover Clip5410DFO* Divided Entrance End Cap

40N2F21 Twin Cover Device Bracket40N2F06 Cover Clip 40N2F19 2” Bend Radius Full Capacity External Elbow40N2F31 Twin Cover Device Bracket40N2F15 2” Bend Radius Full Capacity Tee40N2F74 Divided Transition FittingPSB1 One-Gang Power Box40N2F11 2” Bend Radius Full Capacity Flat Elbow40N2F20 Blank End Fitting40N2F17 2” Bend Radius Full Capacity Internal Elbow40N2C08 Full Width Cover40N2F05 Base Clip40N2B08 Two-Compartment Base

SYSTEM LAYOUTKey

Color: To each part number, add “WH” suffix for White finish or “V” for Ivory finish. When ordering Ortronics inserts, be sure to include the correct color suffix to the Ortronics part number. Standard Ortronics color is Fog White. Add “-88” suffix for White, “-99” suffix for Ivory.

5400TB 5417FO

5450A3

5410

5410DFO

5406T

5418FO

5400TC5474

54155400C

2A CommunicationDevices

5406A

5450

5411FO

5400TWC

5418

40N2F21 40N2F06

40N2F19

40N2F3140N2F31

40N2F15

40N2B08

40N2F05

40N2C08

40N2F17

40N2F74

40N2F11

40N2F20

PSB1

CableSmart™ 40N2 Series Raceways


deQuorum™ Work Surface Portal

deQuorum Flush Mount PortalThe deQuorum work surface portal is available with flush or contoured covers, in black or silver tone finishes. The contoured cover allows an area to insert a laminate to match that of the table.

It is available in a cord ended, or field installed configuration. The cord ended configuration comes with a 15A gasketed prewired receptacle with 12’ [3.65m] 14/3 SJT black cord. The field installed configuration comes with a 15A gasketed prewired receptacle with gasketed plate and a 3/8” [9.5mm] diameter 6’ [1.83m] flexible whip. For each configuration, the communications plate includes user chosen bezels which the installer must connect to communications modules purchased separately.

Bring technology to the user by installing the deQuorum Work Surface Portal in conference tables, individual workstations, or mobile teaming tables. deQuorum delivers access to the services which today’s work environment demands – power, voice, and data. This unit can be designed to blend with the décor and accommodate the electrical and communications requirements of the user – delivering both form and function. Available in a variety of sleek finishes, it also offers configurable technology options with modular, multimedia connectors.

Flush Mount Units

deQuorum Flip-Up PortalFeatures spring-activated, die-cast, “flip-up” lid. Single or dual flip-up units are available in black or stainless steel finish. Each unit is supplied with a 12’ [3.65m] cord.

Flip-Up Units

Flush Unit Communications Plates

PART NO. DESCRIPTION

KC10CM2Cord-ended. Flush black. Open system. Decorative recess.

KC10RT8 Cord-ended. Flush black. Ortronics system.

KC15RT8 Cord-ended. Flush graphite. Ortronics system.KF10CM8 Field installed. Flush black. Open system.

KF15RT2Field installed. Flush graphite. Ortronics system. Decorative recess.


KA102RTReplacement Ortronics communications plate.Bezels accept Series II® or TracJack® systems.

KA104CMReplacement Wiremold open system communications plates. Bezels accept Wiremold CM Series modules

KA700Replacement 15A gasketed receptacle and mounting plate

KA302 Cable cord keeper plateKA305 Extron Mini AAP AV adapter plateKA301 Single gang opening plateC70 Slotted cable duct. Routes cables under table.


KP9999 Single. Black cover. One 20A duplex receptacle.

KP9999-15 Single. Black cover. One 15A duplex receptacle.

KP9999RTDual. Black cover. One 20A duplex receptacle. One bezel for Ortronics Series II or TracJack.

KP9999RT-15Dual. Black cover. One 15A duplex receptacle. One bezel for Ortronics Series II or TracJack.

KP9999CMDual. Black cover. One 20A duplex receptacle. Wiremold CM Series communications faceplate.

KP9999CM-15Dual. Black cover. One 15A duplex receptacle. Wiremold CM Series communications faceplate.

KP2345 Single. Stainless cover. One 20A duplex receptacle.

KP2345-15 Single. Stainless cover. One 15A duplex receptacle.

KP2345RTDual. Stainless cover. One 20A duplex receptacle. One bezel for Ortronics Series II or TracJack.

KP2345RT-15Dual. Stainless cover. One 15A duplex receptacle. One bezel for Ortronics Series II or TracJack.

KP2345CMDual. Stainless cover. One 20A duplex receptacle. Wiremold CM Series communications faceplate.

KP2345CM-15Dual. Stainless cover. One 15A duplex receptacle. Wiremold CM Series communications faceplate.

deQuorum Flush Portal

deQuorum Flip-up Portal


Zone Cabling Enclosures

Ceiling Zone Cabling Enclosure

Designed to integrate into standard 2’ x 2’ drop ceiling grids. Accepts a wide variety of patch panels & wiring blocks for copper and fiber applications. Key locks provide added security. Custom units available. UL50, UL1863, and UL2043 listed.

Wiremold/Legrand offers a full line of enclosures which support integrated zone systems. These enclosures create an intermediate or remote consolidation point that may be tested and secured prior to adding drops for voice and data outlets. Further, a remote consolidation point or zone enclosure reduces costs associated with moves, adds and changes. The enclosures also allow the user to save space in tight areas and reducing cooling requirements in potentially crowded equipment and data rooms by moving active equipment to alternative sites.

CZE Series

Raised FloorZone Cabling Enclosure

Designed to integrate into standard 2’ x 2’ floor tile openings. Accepts a wide variety of patch panels & wiring blocks for copper and fiber applications. Custom units available. UL50, UL1863, and UL2043 listed.

RFE Series

CZE Series Enclosure

CZE Series Enclosure


CZE-242412A12” deep telecommunications enclosure. One removable 7 RMI bracket for 19” patch panels and equipment. Includes junction box and fan.

CZE-242412WB12” deep termination block enclosure. One removable mounting plate for two 300 pair 1100 style termination blocks (without legs).

CZE-242412PP12” deep patch panel enclosure. One bracket for 19”patch panels. Bracket supports 5 RMU


RFE-25256Enclosure for 6” deep floor. Two pairs of pivoting mounting rails for 19” patch panels. Rails support 2 RMU each.

RFE-25257RBEnclosure for 8” deep floor. Two pairs of pivoting mounting rails for 19” patch panels. Rails support 4 RMU each.

RFE-242412Enclosure for 14” deep floor. A single mounting rail for 19” patch panels. Rail supports 11RMU.


Vista™ WAP Enclosure

The VLWAP is an open space solution for mounting wireless access points in Vista architectural columns. The VLWAP provides a means for integrating the access points necessary for wireless connectivity into a building’s communications infrastructure. Access points installed in a Vista Column can be located to provide optimal Wi-Fi signal coverage in a secure, yet accessible environment having built-in connectivity and power options.

Overhead WAP Bracket

The WAPBRKT provides a secure support for mounting wireless access points in overhead applications. The bracket can be mounted directly to basket tray or threaded rod, or to threaded rod attached to cable tray. Wireless Access Point Mounting Bracket can be located for high visibility, convenience, and optimal Wi-Fi signal coverage.

Nonmetallic WAP Wall Enclosure

The NMAPME provides a means for mounting wireless access points to wall surfaces in a secure, accessible, and aesthetically acceptable manner. The NMAPME conceals wireless access points in a durable UL/cUL listed enclosure. Designed to provide a permanent location for wireless connectivity hardware within a building’s communications infrastructure, the enclosure can be easily secured to any structure allowing optimal Wi-Fi signal coverage to adjacent spaces while supporting industry standard POE (power over Ethernet).

Wireless Access Point Enclosures & Brackets

Wireless Access Point (WAP) Enclosures from Wiremold/Legrand provide a secure, aesthetically pleasing means for integrating access points for wireless connectivity into a building’s communications infrastructure. Enclosure options include the Vista™ architectural column for open space applications, a nonmetallic enclosure for wall mounting, a ceiling enclosure for installation in ceiling grid systems, and a mounting bracket for attaching to cable tray in overhead spaces. All Wiremold Wireless Access Point Enclosures provide ample space for most leading manufacturer’s access points.

VLWAP Features

WAPBRKT Features

NMAPME Features

VLWAP

WAPBRKT

NMAPME

Superior signal access

Reduced signal interference

Lockable hinged glass panel

Large capacity compartment

Multiple mounting options

Convenient termination point

On-board 120V power supply

UL and cUL Listed

Versatile design works with most cable tray products

Support bars provided for threaded rod attachment


Multiple openings to accommodate most access points


Galvanized steel construction for maximum strength

Thermoplastic wall construction

Convenient termination point and raceway connectivity

Security lock included


Flexible AP installation


UL and cUL Listed


Wireless Access Point Enclosures & Brackets

Ceiling WAP Enclosure

The WAPE and WAPENCL Series provide secure enclosures for mounting wireless access points into a grid ceiling system. Designed for easy installation, these enclosures can be fully assembled into a ceiling tile on a work surface before being installed into the overhead ceiling grid system. Available in multiple depths with several cover options to accommodate a variety of wireless access points.

WAPE & WAPENCL Series

WAPENCL


WAPE5-BLKIT 5” deep enclosure. Blank cover. 12”W x 14”L

WAPE10-BLKIT 10” deep enclosure. Blank cover. 12”W x 14”L

WAPE5-1200KIT 5” deep enclosure. Faceplate for CISCI Aironet 1200. 12”W x 14”L






WAPE5-UNIKIT 5” deep enclosure. Universal faceplate. 12”W x 14”L

WAPE10-UNIKIT 10” deep enclosure. Universal faceplate. 12”W x 14”L

WAPE10-DOME 3” deep enclosure. 14” diameter by 6 1/2” deep transmission dome.

WAPENCL 4” deep enclosure. Cover with knockouts. 13 3/8”W x 13 1/2”L

WAPENCL-24-24-4 4” deep enclosure Cover with knockouts. 24”W x 24”L.


Wiremold® Fittings for use with Ortronics® Wi-Jack™ Wireless Access Points

Wiremold wireless access point fittings seamlessly integrate with Wiremold raceway systems. Designed for new and retrofit applications. Options include a nonmetallic device box for use with Eclipse™ Series raceway, a metal box for use with V500 Series and V700 Series Raceway, and a bracket for use with 5400 Series Raceway.

Fittings Options

V5748-3 Metal Device Box

PSB3 Nonmetallic Device Box CAT. NO. DETAILS

PSB3FWOrtronics fog white non-metallic 3-gang device box twistouts on all four sides for Eclipse™ PN03, PN05 & PN10 Series Raceway

V5748-3Ivory metal 3-gang device box twistouts on all four sides for use with V500 & V700 Series™ Raceways

5450-ORAP Bracket for use with 5400 Series Raceway

5450-ORAP Bracket


The new Walkerflex Modular Wiring System is a factory assembled modular wiring system, designed to interface with various power applications: raised floor boxes, poke-thru systems, service poles, surface raceways, wireways, and convenience outlets. This design, with its plug-in feature, provides tremendous wire management flexibility and labor savings vs. traditional pipe and box wiring methods. Walkerflex is ideal for use in raised floor systems in combination with FloorSource™ Raised Floor Boxes. Both products are suitable for use in commercial offices, computer rooms, schools and any facility with a demand for high flexibility in wiring requirements.

Prewired AF Series Box

Color-coded snap-in components ensure secure, accurate wiring connections.

Walkerflex Power Adapters, Cable Splitters, and male and female Wire Connectors

AF Series Raised Floor Box

NDU – Distribution Unit

NCBS – Cable Splitter

NCS – Cable Set

Typical workstation layout using Walkerflex products to feed furniture panel and AF Series Raised Floor Box in a raised floor application.

Walkerflex® Modular Wiring System


6ATC & 8 ATC Series

RC4 Surface Poke-Thru DeviceUnit includes four prewired 20A receptacles. Each duplex receptacle can be wired as standard duplex or isolated ground. Unit also includes Ortronics TracJack mounting bezels, four blank TracJack inserts for closing off unused communication openings and Series II bezels.

Poke-Thru Devices

The new Evolution™ Series large capacity, recessed poke-thru devices and the surface, flush, and furniture feed style poke-thru devices are excellent solutions for bringing both power and communication services to the workstation in an open space, above-grade floor environment. Each device provides an excellent solution for both new or retrofit construction, with typical applications including office buildings, airports, malls, shopping centers, libraries, and schools. Devices provide TopGuard™ protection.

Evolution Series RecessedPoke-Thru DeviceLarge capacity for power, communications, or A/V devices. All metal die-cast aluminum cover. 6ATC Series has two and one half gangs capacity and requires 6” core hole. 8ATC Series has four gang capacity and requires 8” core hole.

RC4 Series

RC9AM2TC SeriesRC9AM2TC Furniture FeedPoke-Thru DeviceComplete with combination 1 1/4” and 2” trade size threaded conduit openings and closure plugs.

4FFATC Series4FFATC Dual Service Furniture Feed Poke-Thru DeviceComplete with one 3/4” opening for power and one 1 1/4” opening for communications.

AMD8 SeriesAMD8 All CommunicationsPoke-Thru DeviceAll communication flush style poke-thru device will accept up to eight ports for connectivity devices. For both new and retrofit installations in schools, commercial offices, government and institutional facilities.

AV3 SeriesAV3 A/V Poke-Thru DeviceFlush style poke-thru device specifically designed for the audio/video market. Includes 20A duplex receptacle and three ports for A / V style connectivity devices.

NEW

VersaMax Series

RC4 Series

RC9AM2TC Series

4FFATC Series

AMD8 Series

AV3 Series

PART NO. DESCRIPTION6ATCPBK 6” poke-thru assembly with black cover6ATCPGY 6” poke-thru assembly with gray cover6ATCPNK 6” poke-thru assembly with nickel cover6ATCPBS 6” poke-thru assembly with brass cover6ATCPBZ 6” poke-thru assembly with bronze cover8ATCPBK 8” poke-thru assembly with black cover8ATCPGY 8” poke-thru assembly with gray cover8ATCPNK 8” poke-thru assembly with nickel cover8ATCPBS 8” poke-thru assembly with brass cover8ATCPBZ 8” poke-thru assembly with bronze cover


RC4ATCGY Poke-thru assembly with painted gray flangeRC4ATCBK Poke-thru assembly with black flangeRC4ATCAL Poke-thru assembly with aluminum flangeRC4ATCBS Poke-thru assembly with brass flange


4FFATCGY Poke-thru assembly with painted gray flange4FFATCBK Poke-thru assembly with black flange4FFATCAL Poke-thru assembly with aluminum flange4FFATCBS Poke-thru assembly with brass flange


AMD8ATCGY Poke-thru assembly with painted gray flangeAMD8ATCBK Poke-thru assembly with black flangeAMD8ATCAL Poke-thru assembly with aluminum flangeAMD8ATCBS Poke-thru assembly with brass flange


AV3ATCGY Poke-thru assembly with painted gray flangeAV3ATCBK Poke-thru assembly with black flangeAV3ATCAL Poke-thru assembly with aluminum flangeAV3ATCBS Poke-thru assembly with brass flange


RC9AM2TCGY Poke-thru assembly with painted gray flangeRC9AM2TCBK Poke-thru assembly with black flangeRC9AM2TCAL Poke-thru assembly with aluminum flange


Resource RFB Series

RFB9 & RFB11 Large Capacity A/V Recessed Floor BoxesProvide power, communications, and the special space requirements of audio/visual type connectors to above grade floors, in open space areas, or directly to the workstation. Adjustable before concrete pour. Provided with mudcap to prevent entry of concrete during pour.

Recessed Floor Boxes

Wiremold® Resource RFB® floor boxes offer unsurpassed flexibility and a wide range of configurations, thanks to independent wiring compartments and feed-through wiring capability. Resource RFB Floor boxes offer versatile activation solutions ideal for areas with different needs at different times. The Resource RFB Series provides independent wiring compartments for power, communications and audio/video services to open space areas or directly to workstations. Features TopGuard™ protection that exceeds 2003 UL scrub water standards.

RFB4 Series MultiserviceRecessed Floor BoxesFour-compartment, combination floor box available in steel, cast iron and steel shallow depth versions. Each is fully adjustable with a tunnel compartment and two receptacle brackets.

RFB9 & RFB11 Series

Floorport SeriesFloorPort™ Flanged Cover AssembliesFor use with RFB4 Series floor boxes. Available in die cast aluminum assembly with aluminum finish, or die-cast zinc assembly with brass or black finish. Available with flush lid or lid with cutout for tile or carpet.

RFB2 Series Multiservice Recessed Floor BoxesTwo-compartment, combination floor box available in steel, shallow, and on-grade versions. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle, mounting plate, and one (1) communication mounting plate.

RFB6 Series MultiserviceRecessed Floor BoxesSix-compartment, multiservice combination floor box in steel and on-grade versions. Supplied with two (2) duplex receptacles mounting plates, two (2) communication plates, and two (2) blank plates.


RFB4 Steel – 12 3/4”L x 10”W x 3 7/16”D

RFB4-CI-1 Cast Iron – 14 1/2”L x 11 7/8”W x 3 7/16”D

RFB4-SS Shallow Steel – 13 5/8”L x 10”W x 2 7/16”D

RFB2 Steel – 13 1/8”L x 6 1/2”W x 3 7/16”D

RFB2-OG On-grade – 13 1/8”L x 6 1/2”W x 3 7/16”D

RFB2-SS Shallow Steel – 13 1/8”L x 6 1/2”W x 2 5/8”D

RFB6 Steel

RFB6-OG On-grade


RFB9 9-gang box. 14 5/16” L x 12 1/8” W x 4 1/8” D

RFB9-OG9-gang on-grade box. 14 5/16” L x 12 1/8” W x 4 1/8” D

RFB11 11-gang box. 14 5/16” L x 12 1/8” W x 6 1/8” D

RFB11-OG11-gang on-grade box. 14 5/16” L x 12 1/8” W x 6 1/8” D

RFB119CTC* Carpet cover assembly includes carpet cutout area.

RFB119BTC* Flush assembly.


S38CCTC* Cutout lid. Flanged assembly. Tab release latch.

S38BBTC* Flush lid. Flanged assembly. Tab release latch.

S39CCTC* Cutout lid. Flangeless assembly. Tabless release latch.

S39BBTC* Flush lid. Flangeless assembly. Tabless release latch.

S40CCTC* Cutout lid. Flanged assembly. Tabless release latch.

S40BBTC* Flush lid. Flanged assembly. Tabless release latch.

RFB4 Series

RFB2 Series

RFB6 Series

S38BBTCBS

RFB11 Series

* Add “AL” for die-cast aluminum with brushed aluminum finish, “BS” for die-cast aluminum with plated brass finish, or “BK” for die-cast aluminum with painted black finish.

* Add “AL” for die-cast aluminum with brushed aluminum finish, “BK” for die-cast aluminum with painted black finish, or “GY” for die-cast aluminum assembly with gray finish.


AF Series Raised Floor Boxes

Available in three (AF1) or four (AF3) compartment models that accommodate a combination of both power and communication devices. This combination is accomplished with the built-in service dividers. These dividers are arranged in a single-double, single-gang configuration. Die-cast aluminum housing provides added strength and reliability. Polycarbonate hinged lid and trim flange are available for carpet or tile applications, as well as a color choice of black, brown, or gray

Raised Floor Boxes

FloorSource™ Series raised floor boxes offer a wide range of raised floor boxes that provide flexibility, accessibility and capacity for raised floor applications. FloorSource boxes are suitable for PBX rooms, IT server rooms, computer labs, and financial, commercial and educational institutions. They are available in two styles to provide a variety of combinations for power and communications.

AF Series Floor Boxes*

* A full selection of single- and double-gang Panel Device Plates for the AF1 and AF3 floor boxes is available. Visit www.wiremold.com.

* A full selection of Power and Communication Plates is available for the AC floor boxes. Visit www.wiremold.com.

AC Series Raised Floor Boxes

The AC8850 and AC8105 are boxes with a 5” [127mm] depth design, with the AC8105 providing an extra 2” [51mm] of width for additional wiring capacity. These boxes can accommodate four duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept at least three communication bezels for up to 18 ports of activation. Lids rotate 180° for easy orientation. Gray lids are die-cast zinc construction.

The AC8840 and AC8104 are boxes with a 4” [102mm] depth design, with the AC8104 providing an extra 2” [51mm] of width for added wiring capacity. These boxes can accommodate two duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept two communication bezels for up to 12 ports of activation. Lids can be rotated 180° for easy orientation. Gray lids are die-cast zinc construction.

AC Series Floor Boxes**


AF1-KC 3 compartments. Black carpet cover. 8”x6”x5”.

AF1-KT 3 compartments. Black tile cover. 8”x6”x5”.

AF1-NC 3 compartments. Brown carpet cover. 8”x6”x5”.

AF1-NT 3 compartments. Black tile cover. 8”x6”x5”.

AF1-YC 3 compartments. Gray carpet cover. 8”x6”x5”.

AF1-YT 3 compartments. Gray tile cover. 8”x6”x5”.

AF3-KC 4 compartments. Black carpet cover. 8”x10”x5”.

AF3-KT 4 compartments. Black tile cover. 8”x10”x5”.

AF3-NC 4 compartments. Brown carpet cover. 8”x10”x5”.

AF3-NT 4 compartments. Black tile cover. 8”x10”x5”.

AF3-YC 4 compartments. Gray carpet cover. 8”x10”x5”.

AF3-YT 4 compartments. Gray tile cover. 8”x10”x5”.


AC8840 8” x 8” x 4” box.

AC8850 8” x 8” x 5” box.

AC8104 8” x 10” x 4” box.

AC8105 8” x 10” x 5” box.

AC10105-2 10” x 10” x 5” box.

AF Series

AC Series


FlameStopper Fittings

Fittings are shipped in pairs and designed for use on both sides of a wall/floor fitted with 2” or 4” trade size EMT conduit. Available in red or G90 galvanized finish. A heat shield and retrofit kit is available for use in existing installations in walls. FlameStopper fittings have been tested by Underwriters Laboratories Inc. to ASTM E814 UL1479, Fire Tests of Through-Penetration Firestops. The Flamestopper Thru-Wall Fittings offer a passive fire and life safety system with ratings up to four hours (with or without cables installed) to complement existing sprinkler systems, and up to three hours for fire rated floors.

FlameStopper™ Fittings for Fire Walls & Floors

The FS Series thru-wall and thru-floor fittings have been redesigned to provide firestopping solutions for both new and retrofit applications. FlameStopper fittings provide installers with a variety of UL Classified ready-to-use options for transitioning cables through firewalls and floors to ensure that the integrity of the fire rating is maintained.

FS Series

FlameStopper Thru-Wall Fitting Installation for New Construction

1. Determine location and cut hole in wall using hole saw, keyhole saw or a core drill.

2. Insert the appropriate length of conduit into the opening.

3. Place the FlameStopper Thru-Wall fitting box over the opening and secure the two bolts.


FS4R-RED Fire stop 4” trade EMT conduit fitting. Red.FS4R-GA Fire stop 4” trade EMT conduit fitting. Galvanized.FS2R-RED Fire stop 2” trade EMT conduit fitting. Red.FS2R-GA Fire stop 2” trade EMT conduit fitting. Galvanized.FSPCC4758 Precut conduit 4” trade size EMT. 7 5/16” length.FSPCC2758 Precut conduit 2” trade size EMT. 7 5/8” length.SPMGL Grounding lug. For use with cable trays.WBSBC Split bolt connector. For use with wire tray.

FS4RHSHeat shield 4” trade size conduit. Used only when an existing installed conduit extends 1” to 6” beyond surface.

FS2RHSHeat shield 2” trade size conduit. Used only when an existing installed conduit extends 1” to 6” beyond surface.

FS4RWP12 Retrofit kit for existing installations - 4”.FS2RWP8 Retrofit kit for existing installations - 2”.

FS4R-RED

2” & 4” models shown with EMT conduit


Power Commander® IQ Network Controlled PDU

Keep up with the ever increasing management demands of your data center with Power Commander IQ Network Controlled Power Distribution Untis (PDUs) from Wiremold/Legrand. These models offer secure remote access for all power outlets, giving users the flexibility they need to manage the ever increasing loads placed on IT infrastructure. All models have current and temperature monitoring, critical in today’s higher power density environments.

SPDU20-OU Specifications

SPDU8-1U & SPDU16-2U Specifications

SPDU20-OU

SPDU8-1U

SPDU16-2U

AC Voltage Input 100 to 125VAC Voltage Output 100 to 125VFrequency 60 HzLoad Capacity 20AOutput Receptacle 20 switched NEMA 5-15Product Warranty 2 yearsPower Cable – AWG Length & Plug Type

12/3 SJT Type, L5-20P Locking plug, 9 1/2 ft. [2.9m]

AC Current Draw Monitoring Measurement of True RMS from all circuitsConsole Interface – Local Master Port

1 RS232 Port. RJ-45 Connector Type. Data: 7 or 8 bits. Stop Bits: 1 or 2. Parity: None, Odd or Even. Flow Control: None or RTS/CTS. Baud rate 2400 to 115200.

Audio Buzzer 85 Decibel

Display20 Power Outlet On/Off status LEDs, 1 Power On/Off LED. 2 Network LEDs. 2 digit LED display (1.00” x 0.65”) [25mm x 16.5mm] for AC Current Draw Status.

Temperature Sensing Port Digital Input Port – RJ11Network Interface 10BASE-T RJ45Network Protocols CMP, TCP/IP, DHCP, Telnet, DNS, POP3/SMTP, SNMP, HTTP, and BootPWeight 18 lbs. Shipping WeightDimensions 61”L [1.5m] x 1 3/4”W [44mm] x 2 1/2”D [60mm]Operational Temp. Environment 32F° – 122F° (0C° – 50C°)Storage Temperature -20F° – 140F° (-29C° – 60C°)Humidity 10% – 90% RH

Catalog Number SPDU8-1U SPDU16-2UAC Voltage Input 100 to 125VAC Voltage Output 100 to 125VFrequency 60 HzLoad Capacity 15A 30A (2 circuits, 15A EACHOutput Receptacle 8 switched NEMA 5-15 16 Pcs switched NEMA 5-15 (8 ea circ.)Product Warranty 2 yearsPower Cable – AWG Length & Plug Type

14/3 SJT Type, 5-15P straight blade, 4 1/2 ft. [1.4m] SPDU16-2U has 2 power cables)

Console Interface – Local Master Port

1 RS232 Port. RJ-45 Connector Type. Data: 7 or 8 bits. Stop Bits: 1 or 2. Parity: None, Odd or Even. Flow Control: None or RTS/CTS. Baud rate 2400 to 115200.

Display8 (SPDU8-1U) or 16 (SPDU16-2U) Power Outlet On/Off status LEDs, 1 Power On/Off LED. 2 Network LEDs. 2 digit LED display (1.00” x 0.65”) [25mm x 16.5mm] for AC Current Draw Status.

Temperature Sensing Port Digital Input Port – RJ11Network Interface 10BASE-T RJ45Network Protocols CMP, TCP/IP, DHCP, Telnet, DNS, POP3/SMTP, SNMP, HTTPs/HTTP, and BootPWeight 7 lbs. Shipping Weight 10 lbs. Shipping WeightDimensions 61”L [1.5m] x 1 3/4”W [44mm] x 2 1/2”D [60mm]Operational Temp. Environment 32F° – 122F° (0C° – 50C°)Storage Temperature -20F° – 140F° (-29C° – 60C°)Humidity 10% – 90% RH


Power Commander® Power Distribution Units

Increase your IT closet’s potential with our high amperage 30A or 40A PDU. Allows you to safely draw a total of 30 or 40 Amps per unit, twice as much power as the standard 15A power strip. Among the first in the industry to meet the new UL60950-1 1st Edition and ITE Standards, the 30 and 40 Amp Power Commander PDU’s feature UL489 Listed breakers, increasing the safety and reliability of distributed power.

30 & 40 Amp Units

Power Commander PDU’s

High amperage 30 amp or 40 amp 120V and 208V units feature an aesthetic narrow aluminum profile available in black or gray. Two easy access circuit breakers provide overload protection and the T-slot mounting rail allows several mounting options in tight spaces.

Current monitoring allows you to distribute power loads evenly to maximize current draw and avoid circuit overloads.

Extensive custom options are available.

30 Amp Unit Specifications

40 Amp Unit Specifications

Custom Optionsn Increase voltage of 125V, 208V

or 250Vn Multiple circuits availablen Dual input systemn Ammeter options availablen Increased amperage availablen Plug Type: L5-30P, L14-20P,

L6-20P, L14-30P, L21-20Pn Outlet Types: Simplex or Duplex,

NEMA 5-15R, 5-20R, & 5-15IG; IEC Receptacles C13, C19

n Lower profile housing available (2”W x 1 3/4”H)

n Number of receptacles: 2 - 106n Length: 12” - 144”n Custom mounting optionsn Double pole 10KA AIC breakern UL approval available on select

custom optionsn Surge protectionn And more!

3B53B2-1-AM


3A44B2-1 30A PDU. 24 20A simplex outlets. 48” length. Gray.3A44B2-1 30A PDU. 24 20A simplex outlets. 48” length. Black.3A86B2-1 30A PDU. 36 20A simplex outlets. 70” length. Gray.3B86B2-1 30A PDU. 36 20A simplex outlets. 70” length. Black.

3B53B2-1-AM30A PDU. 18 20A simplex outlets. Two lighted LCD digital ammeters. 54” length.

3B43B2-1-RAM30A PDU. 18 20A simplex outlets. Two lighted remote LCD ammeters. 48” length.

4B44B2-2 40A PDU. 24 20A simplex outlets. 48” length.4B86B2-2 40A PDU. 36 20A simplex outlets. 70” length.

4B53B2-2-AM40A PDU. 18 20A simplex outlets. Two lighted LCD digital ammeters. 54” length.

4B43B2-2-RAM40A. PDU. 18 20A simplex outlets. Two lighted remote LCD ammeters. 48” length.

AC Voltage Input 100 to 127VAC Voltage Output 100 to 127VFrequency 60 HzLoad Capacity UL Rated 24 Amps max – (2) 12 Amp circuitsCircuit Breaker (2) 15 Amp UL489 Listed circuit breakersOutput Receptacle NEMA 5-20RConformance Standards

UL60950-1 1st Edition

Product Warranty 2 yearsPower Cable – AWG Length & Plug Type

10/3 SJT Type, L5-30P, 12 ft. [3.6m]

AC Voltage Input 200 to 230VAC Voltage Output 100 to 115VFrequency 60 HzLoad Capacity UL Rated 32 Amps max – (2) 16 Amp circuitsCircuit Breaker (2) 20 Amp UL489 Listed circuit breakersOutput Receptacle NEMA 5-20RConformance Standards

UL60950-1 1st Edition

Product Warranty 2 yearsPower Cable – AWG Length & Plug Type

12/4 SJT Type, L14-20P, 12 ft. [3.6m]


Plug-In Outlet Center® Units

Rack Mount PIOC Units

Fit standard 19” [482mm] relay racks. Compact 1U design takes up minimum space. 23” [584mm] units available. Include a black matte finish and a 6’ or 15’ black cord. All units are UL and cUL Recognized components. 15 or 20 Amp units available. Units also available with surge protection.

CabinetMATE® PIOC Units

Include a narrow 1 1/2” x 1 3/16” [38mm x 20mm] aluminum housing. Include gray finish and 6’ or 15’ black cord. All units are UL and cUL Recognized components. 15 or 20 amp units available. Units also available with surge protection.

Bring power safely and conveniently to your communications closet, rack, or cabinet with a full line of Plug-In Outlet Center Units from Wiremold/Legrand. Units are available in both 15 and 20 Amp configurations. Wiremold/Legrand also offers extensive custom capabilities for Plug-In Outlet Center Units.

Rack Mount Units – 15 Amp

CabinetMATE Units – 15 Amp

The MeterReader Current Monitoring Device (CMD) is the first UL approved product of its kind. Compatible with both Wiremold and competitors’ Power Distribution Units, retrofitting an existing power strip with the MeterReader CMD allows the user to bypass costly downtime and eliminate high equipment and labor charges associated with adding ammeter capabilities. Inserted between the power source and your equipment, the MeterReader CMD measures the current and displays the reading on the remote unit installed at the front of your IT rack or cabinet. Offering truly aesthetic integration, the MeterReader CMD will upgrade your IT closet’s capabilities while keeping money in your pocket and time on your side.

MeterReader Specifications

MeterReader CMD

Fit Standard 19” [482mm] relay racks. Compact 1U design takes up minimum space. 23” [584mm] units available. Include a black matte finish and a 6’ or 15’ black cord. All units are UL and cUL recognized components. 15 or 20 amp units available. Units also available with surge protection.

NOTE: The 1U Rack Mountable Faceplate is included with each MeterReader Current Monitoring Device so the remote display can be seamlessly integrated into your IT environment.


J08B0B8 rear outlets. Receptacles rotated 90˚. 4 outlets spaced for transformers. Lighted switch. 6’ cord.

J08B2B8 rear outlets. Receptacles rotated 90˚. 4 outlets spaced for transformers. Lighted switch. 6’ cord.

J06B0B 6 rear outlets. Lighted switch. 6’ cord.J06B2B 6 rear outlets. Lighted switch. 15’ cord.J06B0BX 6 rear outlets. 6’ cord.J06B2BX 6 rear outlets. 15’ cord.


4810ULBC 10 outlets. Length 48”. 6’ cord4810ULBD 10 outlets. Length 48”. 15’ cord7011ULBC 11 outlets. Length 70”. 6’ cord7011ULBD 11 outlets. Length 70”. 15’ cord7710ULBC 12 outlets. Length 77”. 6’ cord7710ULBD 12 outlets. Length 77”. 15’ cord

PART NO. AC INPUT AC OUTPUT LOAD CAPACITY

METL530 100 to 127V 100 to 127V UL Rated 30 amps max.METL520 100 to 127V 100 to 127V UL Rated 20 amps max.METL630 208 to 250V 208 to 250V UL Rated 30 amps max.METL620 208 to 250V 208 to 250V UL Rated 20 amps max.

J06B0B - Front

J06B0B - Rear

4810ULBC

MeterReader™ Current Monitoring Device


Vista™ Architectural Column Consolidation Point

Mini Patch Panel Options

The Vista Column Consolidation Point accommodates the 89D style patch panel, 12 ports maximum, and up to 4 panels per column.

Ortronics® Clarity® Modular to 110 Mini Patch Panels are an ideal solution.

Vista Column Consolidation Points (CP) provide channels that conceal wires and cables behind a decorative center panel and incorporate a user-installed patch panel with easy, secured access through a lockable door. They can be placed anywhere in an open space, providing maximum communication flexibility and unique design elements. These modular columns are easily relocated to accommodate changing space requirements.

Vista Column Options*

* Many other options are available. Visit www.wiremold.com/vista to design your own solution.

27” [686mm]

Data Cable Exit Hole For Up To 48 Cat 6 Cables

3 25/32” [96mm]

13 3/8” [340mm]

ROUND

3 25/32” [96mm]

13 3/8” [340mm]

SQUARE

Ortronics 89D Patch Panel – 12 Ports Max Per Patch Panel (not provided)

Door Pull

Duplex Outlets

Communication Ports

126” [3.2m]

60” [1.52m]

6” [152mm]

24” [610mm]

12” [305mm]

OVERALL DIMENSIONS

Front View Rear View

System Layout

89D Style Patch Panel


VFL662345RTGYDLarge anodized aluminum frame with round end channels, Ortronics TracJack® and Series II® bezels in gray. Accommodates a 10’ ceiling.

VLCP662345

Large anodized aluminum frame with round end channels. Includes gray Ortronics TrackJack and Series 2 bezels. Includes anodized aluminum back panel and 60” door. Accommodates a 10’ ceiling.

VPLY2345 Anodized aluminum panel back of column.

VY6023435L1YAnodized aluminum door with a keyed lock and flush, black door pull, 60”L.

VEL66234524Extension for the column to accommodate up to 12’ ceilings. Includes anodized aluminum center panel.


Tele-Power® Poles

Tele-Power PolesTele-Power Poles are available in a wide selection of materials, wire fill capacities, heights, and devices and include all components required for a complete stationary installation. Dual-channel accommodates electrical power circuits plus receptacles and low voltage cabling.

Dropping power and communications – neatly and simply – from up there to down here; that’s what Wiremold Tele-Power poles are all about. Their sole purpose is to get the business end of your wiring needs down to your office equipment, phones, PCs, and task lighting. Specifically, in away-from-wall locations in open commercial office areas, schools, laps, stores and other sites. Whatever kind of power or communications wiring you need to bring down to the desk side, workstations, or cash registers – Wiremold Tele-Power poles handle all your needs effortlessly.

Steel*

Aluminum*

Communication Vertical Drop*

ALTP-2P

25DTP-4AMDTP-4 ALTP SERIES

COMMUNICATIONS

POWER

1 1/4” [32mm]

2 1/4” [57mm] 1”

[25mm]

2 5/16” [59mm]

2” [51mm]

COMMUNICATIONS

POWER

25DTP-4AMDTP-4

ALTP SERIES

12” [305mm]

1” [25mm]

15.875” [403mm]

30TP-4V (cross section)

30TP-2V30TP-4V

1”[25mm]

14.25” [365mm]

Power

Communications

30TP-2V

30TP-4V

POW

ER

COMMUNICATIONS

2 3/4” [70mm]

1 7/8” [48mm]

1 17/32” [39mm]

3” [76mm]

2 3/4” [70mm]

1 1/2” [38mm]

1 1/2” [38mm]

14.25” [365mm]

1”[25mm]

Receptacle Heights

Cross-Sectional Areas

* Many other models and configurations are available. Visit www.wiremold.com

Tele-Power Poles

PART NO. OUTLETS HEIGHT FINISHCAPACITY

THHN/THWN UTP#10 #12 4-PR 25-PR

25DTP-4Two Duplex Receptacles

(20A, 125V)10’5” [3.175m] Ivory

10 15 15 630TP-2V 9 14 22 830TP-4 18 18 30 11

PART NO. OUTLETS HEIGHT FINISHCAPACITY

THHN/THWN UTP#10 #12 4-PR 25-PR

AMDTP-4Two Duplex Receptacles

(20A, 125V)10’5” [3.175m]

Anodized Aluminum

9 14 22 810 15 15 6

ALTP-2S Four Single Receptacles 10’4” [3.150m]Satin

Anodized– – 5 1

PART NO. HEIGHT FINISH

25DTC-4 10’5” [3.175m] Ivory SteelAMTC-4 10’4” [3.150m] Anodized AluminumALTC-2S 10’3” [3.124m] Satin Anodized

Documents

Wiremold Pathways WIREMOLD.pdf · 2020. 12. 1. · Wiremold cable management systems now fully integrate with Ortronics® technology across a wide range of solutions. These platforms