Embed Size (px)
Citation preview
BRG’s 1709 Wireless Moving MessageDisplay offers a unique way to wirelessly sendtext and pre-recorded audio messagesthroughout your facility or campusadding costly wiring and added infrastructureto your facility. It’s as simple as hanging thesign on the wall and plugging it into anelectrical outlet.
This patent pending design follows therecommendations NFPA 72
Emergency messages are activated using theBRG Wireless Software installed on anauthorized computer or by using a touch toneor cellular telephone. These emergencymessages are delivered to all signs or acertain zone within seconds of activation. Upto 245 zones can be set-up throughout yourcampus. Ten levels of security limit access toauthorized staff only.
Messages are predefined in the BRGSoftware to ensure a concise, detailedmessage is delivered to each sign in theevent of an emergency.
without
of the guidelinesfor emergency mass notification. It has a textwarning for the hearing impaired, a audiowarning for the sight impaired, and an Amberstrobe to catch your attention.
BRG offers models with an un-interruptablepower supply (UPS). The UPS model willdisplay a scrolling emergency message for aminimum of 30 minutes without AC power.
Wireless MovingMessage Displays
Part # BRG 1709
Patent Pending
When the signs are not being utilized for anemergency, they can be used as a digital clock.The time is synchronized on all movingmessage displays from the master transmitter.
An Emergency Notification Master Transmitteris required to operate the moving messagedisplays.
The BRG 1709 requires a 110 VAC outlet forpower and uses 1.2 V amps of power.
The boards measure 38”W x 4.25”H x 1.25”D.
The integrated speaker produces 99 db at 10ft. and the volume can be adjusted at eachboard.
These boards can be mounted directly to a wallwith the supplied mounting brackets or you canpurchase a double sided bracket or doublesided chain mounting system.
BRG 1709 Moving Message Display & SpeakerPatent Pending
BRG1709 Double Sided,Ceiling Mount
BRG1709 Double Sided,Chain Mount
600 N River Street Derby, Kansas 67037800-295-0220 316-788-2000Sales Fax: 720-293-9393Email:Web Site:
[email protected]://www.brgwireless.com
Wireless Moving Message Displays
Copyright 2010, BRG Precision Products, All rights reserved, Printed in the USA, BRG 1709 Rev 1.4, 07.19.2010
Case DimensionsModel Number
SL7X80TC
LEDsH W
7
SL16X120TC
SL16X80TC
SL7X120TC
16
7
16
16
7
SL16X160TC
SL7X160TC
SL16X200TC
SL7X200TC
SL16X240TC
SL7X240TC
7
16
7
16
80
80
120
120
160
160
200
200
240
240
4.2”H x 26”L x 1.75”D
6”H x 26”L x 2.3”D
4.2”H x 38”L x 1.75”D
6”H x 38”L x 2.3”D
4.2”H x 50”L x 1.75”D
6”H x 50”L x 2.3”D
4.2”H x 62”L x 1.75”D
6”H x 62”L x 2.3”D
4.2”H x 74”L x 1.75”D
6”H x 74”L x 2.3”D
BRG 1709 7 80 4.2”H x 38”L x 1.75”D
BRG 1709 Patent Pending
Double Sided Ceiling Bracket
The double sided ceiling mount is only available for theBRG1709 and SL7x120TC. See the table above for details.
Available asDouble Sided
Yes
No
Yes
Yes
No
No
No
No
No
No
No
No. of letters per lineusing 7x6 St7 Font
11
11
17
17
22
22
28
28
34
34
11
Double Sided Chain Mount
The double sided chain mounts are only available on theSL7x80TC, BRG1709 and SL7x120TC message boards.
SL16x80TC
SL16x120TC SL16x160TC
PowerConsumption
25 Watts
37 Watts
37 Watts
32 Watts
53 Watts
40 Watts
69 Watts
50 Watts
85 Watts
65 Watts
101 Watts
