Upload
anjalibajipai
View
219
Download
1
Embed Size (px)
DESCRIPTION
To develop a system for wireless message communication between two computers using 2.4 GHz trans-receiver units. It uses a pair of 2.4 GHz transceiver modules duly powered by 5 volt DC and alarm circuits. They are used for bidirectional real time chat communication from one PC to another wirelessly using hyper terminal.
Citation preview
Wireless Message Communication Between Two Computers
http://www.edgefxkits.com/
Wireless Message Communication between Two
Computers
The aim of this project is to develop a system for wireless message communication between two computers using 2.4 GHz trans-receiver units.
In offices, communication between employees is essential.
This project uses a pair of 2.4 GHz transceiver modules duly powered by 5 volt DC and alarm circuits.
They are used for bidirectional real time chat communication from one PC to another wirelessly using hyper terminal.
Introduction
http://www.edgefxkits.com/
Wireless Message Communication between Two Computers
The user attempts to initiate a chat, intimation upon that message is received first by a buzzer sound.
There after the other user can start communicating over the chat mode from his PC.
A pair of transceiver modules are connected to the PCs using a DB9 (De-Sub) connector and through serial data cord using RS232 protocol communication between the module and the PC.
An on-board dedicated ac to dc power supply is used at both ends to power the units.
Description
http://www.edgefxkits.com/
Wireless Message Communication between Two
ComputersBlock Diagram
http://www.edgefxkits.com/
Wireless Message Communication between Two
Computers 2.4GHz transceiver
Resistors
Capacitors
Diodes
Transformer
Voltage Regulators
555 timers
Transistor
Buzzer
Hardware Requirements
http://www.edgefxkits.com/
Wireless Message Communication between Two Computers
The MAX232 is an integrated circuit that converts signals from an RS-232serial port to signals suitable for use in TTL compatible digital logic circuits.
The MAX232 is a dual driver/receiver and typically converts the RX, TX, CTS and RTS signals .
When a MAX232 IC receives a TTL level to convert, it changes a TTL Logic 0 to between +3 and +15V, and changes TTL Logic 1 to between -3 to -15V, and vice
versa for converting from RS232 to TTL.
MAX 232
http://www.edgefxkits.com/
Wireless Message Communication between Two Computers
The DB9 (originally DE-9) connector is an analog 9-pin plug of the D-Sub miniature connector family (D-Sub or Sub-D).
DB9 CONNECTOR
http://www.edgefxkits.com/
Wireless Message Communication between Two
Computers
The 555 Timer IC is an integrated circuit (chip) implementing a variety of timer and multivibrator applications.
The original name was the SE555 (metal can)/NE555 (plastic DIP) and the part was described as "The IC Time Machine".
Depending on the manufacturer, the standard 555 package includes over 20 transistors, 2 diodes and 15 resistors on a silicon chip installed in an 8-pin mini dual-in-line package (DIP-8).
555 TIMER
http://www.edgefxkits.com/
Wireless Message Communication between Two
Computers
The 555 timer IC is a simple 8 pin DIL package IC.
It can: Be used as a monostable
Be used as an astable
Source or sink 100mA
Use supply voltages of 5v to 15v
Disrupt the power supply - use a decoupling capacitor
PIN DIAGRAM OF 555
http://www.edgefxkits.com/
Wireless Message Communication between Two Computers
Pc Communication
http://www.edgefxkits.com/
Wireless Message Communication between Two Computers
Plug-and-communicate (no configuration required).
Transparent operation supports existing software & systems.
Simple configuration using software & standard AT commands.
Retries & acknowledgements for guaranteed packet delivery.
RS-232/422/485 protocol & multi-drop bus support.
Peer-to-peer, point-to-point & point-to-multipoint networks.
http://www.edgefxkits.com/
Wireless Message Communication between Two
Computers
This concept in future can be further enhanced to link more number of systems forming a network.
To dedicated computers such that number of employees can communicate with each other.
Wireless message communication between two computers works only on operating systems having hyper terminal (E.g. Windows XP). The computer must have a RS232 serial port.
Future Scope