Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
929001470180
Wireless
Wireless LCD Control Panel
Datasheet
WirelessWireless LCD Control Panel
2019/01
This product is a liquid crystal touch multifunctional control panel with built-in wireless communication chip, which
can control other equipment wirelessly, such as lighting, air conditioning, etc. Including control page of lighting,
curtain, scene, temperature, etc., supporting lighting brightness, opening and closing control, air-conditioning,
heating, mode switch, curtain opening and closing action; A variety of scene calls, such as home, away from home,
greeting visitors, cinema mode, to achieve a key direct corresponding scene, such as lighting open, curtain open, air
conditioning open.
Features
• One-click scene control
• For lighting dimming
• For floor heating control
• For air conditioning control
• For curtain opening and closing or
support equipment control with ON
and OFF functions
• ZIGBEE's scene control
• Replace the traditional mechanical 86
control buttons
Bene�ts
• 86 panel, install on the wall easily
• Capacitive multifunctional touch LCD display
• Wireless access, meet 802.15.4 physical
standards
• Meet ZIGBEE ZHA compliance agreement
• Control zigbee-related equipment directly, such
as lighting, curtains, etc
• Abundant control pages with protocols such as
scenario control and group control.
• Support for custom names
• Support up to 12 scenario
• Support up to 20 lamp control
Application
• Office
• Classroom
• Hotel
• Home
2 - 5 2019/01
Electrical data
Speci�cation item Value Unit Conditions
Supply Voltage 5 Vdc
Input Current 190 mA
LCD Size 3.5 Inch
LCD TFT Resolution 320 × 3(RGB)× 240
LCD Type TFT
Touch key type Capacitive touch
ESD 4KV @ conductive
8KV @ air
RF data
Speci�cation item Value Unit Conditions
RF Frequency 2.4 … 2.485 GHz
Channel 16 pcs
Modulation QPSK (DSSS)
Transmit Power 8…10 dBm Conditions: 2.0-3.6V, +25ºC
Typical value :8.5
Receiving Sensitivity -92 … -96 dBm Nominal for 1% PER
Typical value :-94
Maximum receiver input power +10 dBm For 1% PER measured as sensitivity;
supply current at 14.7 mA
Physical Protocol 802.15.4
Security 128 bit AES
EMC & SAFETY
Speci�cation item Value
SAFETY GB19510.1, GB19510.14
EMC GB17625.1, GB/T 17626.4, GB/T 17626.5, GB/T 17626.7, GB9254-2008(CISPR22-2006)
ESD GB/T17626.2(IEC61000-4-2)
Datasheet - Wireless LCD Control Panel
Operational temperatures and humidity
Speci�cation item Value Unit Conditions
Ambient temperature -20...+50 ºC
Relative humidity 10...90 %
Product Data
All speci�cations are typical and at 25 °C Tcase unless otherwise speci�ed.
Ordering Information
Commercial product name 12NC Carton Quantity
Wireless LCD Control Panel 929001470180 30 pcs
Dimensions and weight
Speci�cation item Value Unit Conditions
Material ABS + PC (V0 AC3100)
Color RAL9016
Dimensions L x W x H 88.6 X 88.6 X 12.2 mm Tolerance:+/- 0.1mm
Weight 96 gram
3 - 5 2019/01
Certi�cates and standards
Speci�cation item Value Unit Conditions
Approval marks CE
RoHS RoHS
REACH REACH
ZIGBEE ZIGBEE
Audible noise < 20 dB
Ingress Protection classi�cation IP20
Datasheet - Wireless LCD Control Panel
Data Sheet
Item Dimensions (mm)
A1 88.6
B1 88.6
C1 8.2
C2 13.2
D1 40
E1 32
F1 21
Dimensions (mm)
Wireless LCD Control Panel
Storage temperature and humidity
Speci�cation item Value Unit Conditions
Ambient temperature -25...+85 ºC
Relative humidity 5...95 %
Lifetime
Speci�cation item Value Unit Conditions
Lifetime 30000 Hours Maximum failures=10%
E1
F1
D1
4 - 5 2019/01
Wiring & Connections
1. Fix the base of product to the 86 base of wall with screws
2. Put the power supply of accessories into 86 boxes and connect the 220V mains wire with the wire L and N
of the accessories;(where input: brown L, blue N;Output: 2 pin jack, red L, black N;Note: please disconnect
the 220V power supply when wiring
3. Connect the output of the accessory power supply and the power input of the multi-function touch panel
as shown below
4. Lock the wall bracket as shown below on the transit box through the �tting screw (note that the arrow is up
in the correct direction)
5. Insert the product power wire and output wire of the power supply through the terminal and tilt the
product at a certain Angle. Fasten the upper button and then press the lower end of the product
Datasheet - Wireless LCD Control Panel
01/2019 Data subject to change
www.lighting.philips.co.uk/oem-emea/products/connected-lighting
© 2019 Signify Holding, IBRS 10461, 5600VB, NL. All rights reserved.
The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial o�er and does not form part of any quotation or contract, unless otherwise agreed by Signify.Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.