WinToFlash Guide - Insta

Embed Size (px)

Citation preview

  • 7/30/2019 WinToFlash Guide - Insta..

    1/20

    WinToFlash Guide - Install Windows XP from USB Flash

    drive

    Anonymous in this post (Install Windows XP using USB Flash Disk/ Flash Drive - Step by Step Guide )

    wrote a comment about WinToFlash...

    Thank God, finally someone made a good application to make us easier install Windows from an USB

    Flashdrive, Pen drive, Flashdisk, etc... with WinToFlash you can install Windows

    XP/2003/Vista/2008/7 from USB Flashdrive easily.

    WinToFlash Step by step GuideInstall Windows XP from USB Flash drive:

    Requirements:

    -USB Flash disk/Flash drive/Pen drive/Thumb drive, etc

    -Computer with CD/DVD drive to build this Windows XP setup Flashdisk (oryou mayuse computer

    without CD/DVD drive, but you have to copyWindows XP setup files from another computer to your

    hard disk)

    -Computer with or without CD/DVD drive (e.g. Aspire One)

    Step 1:

    Download WinToFlash here http://wintoflash.com/download/en/

    from the Author: This software may contain bugs (spelling too).

    so if you find any spelling error please write a comment and correct it

    or report to [email protected]

    don't forget to write your WinToFlash version.

    Step 2:

    Extract the zip file, then double click on WinToFlash.exe

  • 7/30/2019 WinToFlash Guide - Insta..

    2/20

    Step 3:

    Click Accept button...

    Step 4:

    This program will transfer Windows setup from CD or DVD to flash driveRecommended to switch on

    Wizard mode for users have no experience ofWindows setup fine tuningWindows setup transfer

    wizardFollowing basic instructions you will transfer Windows setup program to flash drive and

    install Windows on PC have no CD or DVD drive

    Click the button to enter Wizard mode...

  • 7/30/2019 WinToFlash Guide - Insta..

    3/20

    Step 5:

    This program will help you to install Windows from a flash

    To access other features and advanced options swicth to advanced mode (for advanced users).

    for now, we will use wizard mode instead of advanced mode, so click Next...

    step 6:

    Specify locations of files and drive

    on Windows files path click Select button

  • 7/30/2019 WinToFlash Guide - Insta..

    4/20

    Step 7:Select CD/DVD drive which contains Windows XP CD or folder which contains Windows XP files... then

    click OK

    step 8:

    Specify locations of files and drive

    on USB drive click Select button

  • 7/30/2019 WinToFlash Guide - Insta..

    5/20

    Step 9:Select USB Flash drive ... then click OK

    Step 10:

    Specify locations of files and drive

    Click Next button...

  • 7/30/2019 WinToFlash Guide - Insta..

    6/20

    Step 11:

    Select "I Accepted the terms ofthe license agreement" then click Continue...

    Step 12:

    Warning!Formatting will erase ALL DATA on target disk.To format press OK, to quit press Cancel

    Click OK...

  • 7/30/2019 WinToFlash Guide - Insta..

    7/20

    Step 13:Please wait while WinToFlash transferring Windows setup to flash drive

    Step 14:Finished... click Next then Exit

    USB Flash drive ready...

  • 7/30/2019 WinToFlash Guide - Insta..

    8/20

  • 7/30/2019 WinToFlash Guide - Insta..

    9/20

    Step 2:Turn on your laptop then hit F2 rapidly (or Del for some other machine)

    then go to Boot tab > change boot order > then hit F10 key to Save and Exit

    Now you can boot from USB Flash drive, first select

    1st, text mode setup (Boot from flash again after finished)

    then... on the first restart, select

    2nd, GUI mode setup, continue setup + 1st start ofWindows

    Install Windows XP as usual...

  • 7/30/2019 WinToFlash Guide - Insta..

    10/20

  • 7/30/2019 WinToFlash Guide - Insta..

    11/20

    12

    Step1:

    Having your window Xp installer disc, by using the wintoflash software, make a bootable USB flash

    drive.

    Recommendation choose advance option, at the format tab, under file system choose FAT 16 LBA

    (previous I had choose FAT 32 LBA, during booting from USB flash drive an error will occur, so try

    using FAT 16 LBA first if cant try using other format will solve the problem).

    Step2:

    If your laptop comes with original window, it most probably has made a recovery partition for you.

    From my experience, I recommend this partition should be deleted, if not it will cause other problem

    (boot problem, hal.dll error) during the reinstall of window.

    First choose the first option, you will be able to go to the window installation (create partition,

    delete partion page).

    Recommendation--- deleted all the partition that set previously, than only create your own partition.

    Step 3:

    At this stage after u had created your partition, and install the window at the partition that u had

    select. The window will be restart automatically for the first time. After restart, the window wontstartup and continues the window installation; this time u need boot the flash drive again and choose

    the 2nd option. If any error (eg. Hal.dll) occur, try using the other option that had stated.

    Step4:

    By now this window will continue the installation. After finis the installation, window is now

    functioning. BUT in this state, you will probably facing a problem that the window cant boot from

    the HDD, although the 1st priority had been set at the BIOS to boot from hard disk. For me every

    time I need to startup into window I need to boot from the flash drive.

    Solution---- try using window recovering console, this really helpok sharing seasons again. As for

    me, I can boot the recovering console at the window setup page, the solution is I login into windowby using my flash drive first, and I make an virtual drive(can be using power ISO) and load the

    window xp cd (cause hp mini netbook dont hv cd room) so this step had to be done.

    In order to install the window recovering console u can

    go http://support.microsoft.com/kb/314058 and http://support.microsoft.com/kb/307654

    If you have the recovering console the previous step can be skip.

    After the console had been install by using the method above, the window recovering console will be

    able to choose after the system is restart. Then follow the instruction from this

    linkhttp://wintoflash.com/forum/viewtopic.php?f=10&t=366

    After finish all this step, window Xp will be able to load up normally from the hard disk of your

    netbook.

    If the window start up screen keep on appears, you can see the reference from this

    linkhttp://www.theeldergeek.com/disable_the_startup_screen.htm

    My other references

    http://komku.blogspot.com/2009/09/wintoflash-guide-install-windows-xp.html?

    showComment=1274638970155_AIe9_...

    http://komku.blogspot.com/2008/11/install-windows-xp-using-usb-flash-disk.html (using other

    software)

    By Shadow_rx

  • 7/30/2019 WinToFlash Guide - Insta..

    12/20

  • 7/30/2019 WinToFlash Guide - Insta..

    13/20

  • 7/30/2019 WinToFlash Guide - Insta..

    14/20

  • 7/30/2019 WinToFlash Guide - Insta..

    15/20

  • 7/30/2019 WinToFlash Guide - Insta..

    16/20

  • 7/30/2019 WinToFlash Guide - Insta..

    17/20

  • 7/30/2019 WinToFlash Guide - Insta..

    18/20

  • 7/30/2019 WinToFlash Guide - Insta..

    19/20

  • 7/30/2019 WinToFlash Guide - Insta..

    20/20

    Newer Post