Fire Hydrant System

We offer a range of FIRE HYDRANT SYSTEM and YARD HYDRANTS with all

required accessories. Some of the feature of these systems is as follows -

HYDRANT SYSTEM

The Hydrant System comprises of AC motor driven pump sets with all

required accessories including valves, instrumentation and controls etc.

Complete in all respects. An automatic hydrant system is furnished covering

the areas completely from independent

Pipe work from the fire water pump set.

The hydrant pipe work is remaining pressurized through the proposed jockey

pump taking care of any leakages in the system pipe lines, valves and fittings.

The hydrant system is kept charged by pressurized water at approx. 7 Kg. Cm.

Sq. at all times. In the event of fire when any of the hydrant valves in the net

work is opened,the resultant fall in pressure system is enabling starting the AC

MOTOR driven fire water pumping set through pressure switches

automatically. One diesel engine pump shall be standby pump serving hydrant

system. Apart from the automatic starting of the pump sets, provision shall be

kept for manual starting also. Shutting down of the pump sets shall be

manual.

YARD HYDRANTS

Hydrants inside the building is furnished with required accessories such as

hose pipes with instantaneous gun metal couplings and g.m branch pipes

located in hose cabinets. The hose cabinets are wall / column mounting type,

constructed out of 18 gauge mild steel sheets.

The internal hydrants (Landing valves) is single headed type taken out

from 150/100 mm dia riser through suitable reducer. The outlets are gun

metal and confirm to IS: 5290. HT Hose reels is firmly held against the wall

by suitable heavy brackets and supports. The hose reel is swinging type (180

deg.) and the entire Dum reel etc. is as per IS: 3876. The rubber tubing is best

quality (Dunlop) and the nozzle is 6 mm dia. Shut off type. The equipment

shall be out of one of the approved makes

The hydrant main is laid in the form of ring main. The hydrant risers are

terminated with air release valves at the highest points to release the trapped

air in the pipe work.

Fire Sprinkler System

Sprinkler is thermo-sensitive quarzoid liquid glassbulb burst actuated type and be

standard products from an established firm of repute and standing and approved by an

appropriate authority for fire fighting duty. It should be imported only.

All sprinklers is brass castings polished / chrome OR white (polyester) unless stated

otherwise and rated for 12.0 KG/CM2 WG and factory tested for 34.0 KG/CM2.

Sprinklers are pendant OR side wall type as specified and shown on drawings. All

sprinklers shall be provided with an adjustable OR Rosettes escutcheons finished

same as the sprinkler head.

Temp. Classification of sprinklers in each space shall be as shown on the drawings.

Sprinklers shall be selected for the coverage shown on the drawings and ordinarily be

15 MM. Wherever the specified sprinkler is not adequate. The tenders may offer

appropriate size required. Tenders are free to suggest alternatively other suitable

sprinklers with its justification.

Fire Alarm System

We offer our clients our qualitative range of fire alarm systems that is manufactured

by certified companies. These fire alarm systems work on 230V supply and have

provision for battery backup. The equipment provides relay output for interfacing

with security panel, auto-dialer, and audio alarm via siren or buzzer and have zone-

wise visual indications for open, short, test or bypass conditions.

Fire Detector

We specialize in supplying and providing services for our wide range of qualitative

fire detectors. These are procured from certified and reputed manufacturers. Our

range of fire detectors is available with following technical and general specifications:

Light test feature makes testing easy with a flashlight beam

85 dB alarm

Two 9-volt batteries included

5 year limited warranty

CCTV System

In our wide range of fire fighting equipment and accessories, we have CCTV systems

that play vital role in identifying the source of firebreak and preventing it to spread

further by alerting fire fighting personnel. Our CCTV systems are available in

following specifications:

Number of pixels PAL: 512(H)*582(V)

System of signal NTSC/PAL

Lens 16mm

Horizontal resolution 420TVL

Minimum illumination 0Lux

Backlight compensation auto

Electronic shutter 1/50(1/60) ~1/100,000sec

White balance auto

S/N ratio 48dB

Gamma correction 0.45

Operation temperature -20~50

Sync. System internal

Video output 1.0v p-p /75

Power supply DC12V, 8000mA

Dimensions (mm) 60(w)*55(h)*130(d)

Wet Riser System

We supply and provide services for high quality wet riser systems. While providing

maintenance to the Risers, we conduct an initial physical inspection to check

following components:

Valves

Pipework

Seals

Strap

Padlock

Earthing

Cabinet locks

Pressure test at inlet

Pressure test at outlet

Non return valves

Drain down system

Co2 Flooding System

Our company supplies flooding systems that are based on Co2 (Carbon Dioxide) gas.

Co2 is used in the system due to its high ratio of expansion that facilitates rapid

discharge and allows three-dimensional penetration of the entire hazard area quickly.

CO2 extinguishes a fire by reducing the oxygen content of the protected area below

the point where it can support combustion. The extreme density of CO2 assists in

permeating the protected hazard area effectively and suppresses the fire. Due to the

rapid expansion of the 4-6 inches of CO2 snow to gas, the ambient temperature is

reduced in the protected hazard area. This helps in the extinguishing process and

retards re-ignition. CO2 is electrically non-conductive and it has no residual cleanup

associated with its use as a fire-suppressing agent. The proper ventilation allows the

gas to escape to atmosphere after the fire has been extinguished.

Water Spray System

We offer our clients a wide range of water spray system that is manufactured by

reputed vendors. These systems find application in various commercial and industrial

establishments. We have several types available with us that include systems

with G.M/SS type nozzles with stainless steel clamp for quick fixing or unfixing of

nozzles. This arrangement helps in cleaning of the nozzles easily without any help of

tools. Our water spray systems have sturdy looks and are durable enough to resist the

pressure created by the water force.

Bulb Sprinkler

Sprinkler is thermo-sensitive quarzoid liquid glassbulb burst actuated type and be

standard products from an established firm of repute and standing and approved by an

appropriate authority for fire fighting duty. It should be imported only.

All sprinklers is brass castings polished / chrome OR white (polyester) unless stated

otherwise and rated for 12.0 KG/CM2 WG and factory tested for 34.0 KG/CM2.

Sprinklers is pendant OR side wall type as specified and shown on drawings. All

sprinklers shall be provided with an adjustable OR Rosettes escutcheons finished

same as the sprinkler head.

Temp. Classification of sprinklers in each space shall be as shown on the drawings.

Sprinklers shall be selected for the coverage shown on the drawings and ordinarily be

15 MM. Wherever the specified sprinkler is not adequate. The tenders may offer

appropriate size required. Tenders are free to suggest alternatively other suitable

sprinklers with its justification.

Fire Extinguisher

We offer our clients a wide range of fire extinguishers that comprise following types:

A B C" Stored pressure type: Our ABC fire extinguisher is useful for fires of

A, B and C types. Fire breaking out in these types involves cotton, wood,

grease, flammable liquids, electrical wiring, live machinery and others. The

blanketing effect of extinguishers helps in decomposing fire rapidly. Our

equipment is available in following specifications:

B.I.S. Specification: 13849

Capacity: 1Kg, 2 Kg, 5 Kg, 10 Kg, & above with ISI Mark

CO2 type fire extinguishers: We supply CO2 fire extinguishers that are used

for class B and C fires. These classes include oil spillages, fabric, delicate

machinery and various other materials. Our CO2 type extinguishers are able to

extinguish fire by blanketing dilution of oxygen and cooling effects. These are

available in following specifications:

B.I.S. Specification: 2878

Capacity: 2, 3.2, 4.5, 6.5, 9 kg. & 22.5 kg with ISI Mark

Dry chemical powder type fire extinguishers: Our trolley mounted dry

chemical powder fire extinguisher is used in controlling class B and C fires

which include fire caused due to material such as fats, gases, paints, oils,

electrical wiring, solvents, varnish, live machineries and others. These

extinguish fire by displacement of air, beating and decomposition of dry

powder effects. Our dry chemical powder type fire extinguishers are offered in

following specifications:

B.I.S. Specification: 2171 & 10658 :

Capacity: 5kg, 10 kg, 25kg,50 kg,75 kgs with ISI mark

Mechanical foam (AFFF): We supply mechanical foam fire extinguisher that

is used for class A and B fires. These classes involve fire due to various

liquids such as paints, tar, solvents, benzene camphor, naphtha, varnish and

fats like grease and oils. These also include solids such as pigments, resins and

oils. Our mechanical foam extinguisher controls fire by cutting off the

atmospheric supply of oxygen to the burning surface that is known as

blanketing process. It also cools down the container and contents. These are

available with following specifications:

B.I.S. Specification: 10204 & 13386:

Capacity: 9 liter & 50 liter with ISI mark

Hose Reel

Hose reel is important equipment used for fire fighting purposes. We supply our

comprehensive range of hose reels procured from reliable vendors. Our hose reels are

UL approved and possess following features:

Reel diameter: 550mm / 600mm

Tail: 3 / 4" or 1"

Hose length: 20m / 25m / 30m

Hydrant Valves

We offer our clients 63mm Single outlet Landing Valve as per IS: 5290 Type A

specifications. These ISI marked hydrant valves are available in 75mm NB inlet &

63mm female inst. outlet. These are manufactured by using Gunmetal of IS 318

LTB2/ SS304/ SS316 specifications. Its inlet can be provided in flanged type as per

our clients requirement. The outlet is generally female instantaneous and male inst.

outlet is available on request. Our hydrant valves are available in size range of 38mm

to 63mm.