Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
WEIGH IN MOTION SYSTEMS
WIM PRO 2.0
APM PRO sp. z o.o.ul. Barska 7043-300 Bielsko-Biala, Poland
t. +48 33 815 77 38t. +48 33 816 82 21f. +48 33 822 81 48
[email protected]@apm.plwww.apm.pl
www.apm.plwww.apm.pl
WIM PRO 2.0
WIM PRO 2.0 SOFTWARE
Lear
n m
ore about the WIM PRO
2.0
The WIM PRO 2.0 system is the newest solution that allows vehicles weigh in motion at high speeds. The basic configuration
allows a preselection of vehicles exceeding the allowable values, especially vehicle weight and axle masses. In connection
with the VMS signs, the system may semi-automatically or automatically route vehicles exceeding the permissible standards,
e.g. overloaded vehicles, to the car park. Such solution allows a selective control of a given type vehicles. The most advanced
solution in combination with the CEPIK database allows an automatic ticketing.
The WIM PRO 2.0 system was developed focusing on the highest reliability and the measurement accuracy
even for a large number of lanes. System can be integrated with other ITS systems.
READOUTS – the main part of the WIM PRO 2.0 system. They present vehicle data in
real time on selected weighing stations. A set of filters chosen by the operator allows a pre-
view of vehicles meeting chosen criteria. Standard system configuration allows a selection
of many parameters, such as: permissible vehicle speed, gross-vehicle weight, etc. Archive
data is also available. An automatic language settings change based on the browser config-
uration is also possible.
STATISTICS – module allows a generation of standard statistics. There is also a possibility
to personalize this module according to the user needs.
DATA EXPORT– allows saving system data to *.csv or *xls files.
ADMIN PANEL – contains tools to manage users and their privileges.
SERVICE REQUEST – in this module user can report directly within the system a malfunc-
tion or a failure. Information about the report may be automatically send to the service.
SAFETYit helps to save life and health of traffic participants
INFRASTRUCTURE PROTECTIONextends durability and lowers exploitation costs
AUTONOMYfully automatic solutions that does not need maintenanceby the supervisor employees (e.g. WITD)
TECHNICAL SPECIFICATION
Detection of oversized vehicles
Mobile devices interface
Vehicle parameters measurement, including e.g. Vehicle mass, axle load, group axle detection, speed
Detection of incorrect passage
Vehicle size measurement
Weighing precision: A(5), B+(7), B(10) acc. to COST323
Vehicles classification acc. to EN 8+1 in the A1 class (other classification system available)
Configurable vehicle parameters limits in accordance with local regulations
Possibility to integrate with other systems
Flexibility, adaptation to individual client needs or to the end user
Linux System
www.apm.plwww.apm.pl
WIM PRO 2.0
WIM PRO 2.0 SOFTWARE
Lear
n m
ore about the WIM PRO
2.0
The WIM PRO 2.0 system is the newest solution that allows vehicles weigh in motion at high speeds. The basic configuration
allows a preselection of vehicles exceeding the allowable values, especially vehicle weight and axle masses. In connection
with the VMS signs, the system may semi-automatically or automatically route vehicles exceeding the permissible standards,
e.g. overloaded vehicles, to the car park. Such solution allows a selective control of a given type vehicles. The most advanced
solution in combination with the CEPIK database allows an automatic ticketing.
The WIM PRO 2.0 system was developed focusing on the highest reliability and the measurement accuracy
even for a large number of lanes. System can be integrated with other ITS systems.
READOUTS – the main part of the WIM PRO 2.0 system. They present vehicle data in
real time on selected weighing stations. A set of filters chosen by the operator allows a pre-
view of vehicles meeting chosen criteria. Standard system configuration allows a selection
of many parameters, such as: permissible vehicle speed, gross-vehicle weight, etc. Archive
data is also available. An automatic language settings change based on the browser config-
uration is also possible.
STATISTICS – module allows a generation of standard statistics. There is also a possibility
to personalize this module according to the user needs.
DATA EXPORT– allows saving system data to *.csv or *xls files.
ADMIN PANEL – contains tools to manage users and their privileges.
SERVICE REQUEST – in this module user can report directly within the system a malfunc-
tion or a failure. Information about the report may be automatically send to the service.
SAFETYit helps to save life and health of traffic participants
INFRASTRUCTURE PROTECTIONextends durability and lowers exploitation costs
AUTONOMYfully automatic solutions that does not need maintenanceby the supervisor employees (e.g. WITD)
TECHNICAL SPECIFICATION
Detection of oversized vehicles
Mobile devices interface
Vehicle parameters measurement, including e.g. Vehicle mass, axle load, group axle detection, speed
Detection of incorrect passage
Vehicle size measurement
Weighing precision: A(5), B+(7), B(10) acc. to COST323
Vehicles classification acc. to EN 8+1 in the A1 class (other classification system available)
Configurable vehicle parameters limits in accordance with local regulations
Possibility to integrate with other systems
Flexibility, adaptation to individual client needs or to the end user
Linux System
WEIGH IN MOTION SYSTEMS
WIM PRO 2.0
APM PRO sp. z o.o.ul. Barska 7043-300 Bielsko-Biala, Poland
t. +48 33 815 77 38t. +48 33 816 82 21f. +48 33 822 81 48
[email protected]@apm.plwww.apm.pl