PLEASE NOTE THAT THIS FLOOR PLAN HAS BEEN PRO-

DUCED PRIOR TO DETAILED DESIGN AND CONSTRUCTION,

IS INDICATIVE AND FOR ILLUSTRATIVE PURPOSES

ONLY AND DOES NOT CONSTITUTE A REPRESENTATION IN

RESPECT TO THE SIZE, FORM, DIMENSIONS, MEASURE-

MENTS, SPECIFICATIONS OR LAYOUT OF THE UNIT AT

ALL. FURNITURE AND FURNISHINGS ARE NOT INCLUD-

ED. CHANGES MAY BE MADE TO THE LAYOUTS DURING

DEVELOPMENT AND CONSTRUCTION IN ACCORDANCE WITH

THE CONTRACT OF SALE, BUILDING AND OR PLANNING

REQUIREMENTS AND OR FOR COMPLIANCE WITH RELE-

VANT STANDARDS OR CODES. PROSPECTIVE PURCHASERS

MUST MAKE AND RELY UPON THEIR OWN ENQUIRIES.

Wilson Ave by NEOMETRO and MILIEU

Apartment: 205Internal Area: 55m2 Terrace Area: 8m2 Total Area: 63m2

DEVELOPED IN PARTNERSHIP BY

AND

0 0.5 1 2m

designoffice.com.au

5 Hotham Street Collingwood Victoria 3066 AustraliaP +61(0).3.9417.0001

This drawing is to be read in conjunction with the full DesignOffice drawing set, DesignOffice schedules and other consultants drawings or documents. Inconsistencies, errors or omissions found within or between DesignOffice documents, or in relation to other consultants documents are to be reported immediately to DesignOffice for clarification.

All construction, materials and workmanship are to be in accordance with the Building Code of Australia and the relevant current Australian Standards. All details of construction are to be carried out in accordance with good building practice and, when appropriate, in accordance with manufacturers instruction.

Do not scale from these drawings, figured dimensions only are to be used. If in doubt, ask. All dimensions are shown to finished wall, floor and ceiling levels. Contractors must verify all dimensions on site and report any on site discrepancies to DesignOffice for discussion prior to the commencement of any works or preparation of shop drawings. Any changes made to the information or detail contained within these drawings must be approved in writing by DesignOffice.

Confirm all equipment sizes, installation requirements and services required to equipment with manufacturer prior to commencement of works. Report any discrepancies immediately to DesignOffice for resolution. Any visible items not yet specified, (i.e.: air con registers, switches, handles etc) are to be referred to DesignOffice for approval prior to installation. Provide power to all equipment as per manufacturers instructions.

Drawings show design intent only. Contractor must take responsibility for structural integrity and safety and ensure fit for purpose. Drawings shall not be used for construction purposes until issued by DesignOffice for construction. Contractor to provide shop drawings as noted on drawings prior to manufacture.

RevisionDrawing Number

Client

Project

© Copyright DesignOffice 2019All drawings within this package are the copyright of DesignOffice Pty Ltd. They may not be copied or disclosed to any third party for any purpose except as authorised in writing by DesignOffice Pty Ltd.

Date

Scale

Drawn By Checked By

Project Number

Drawing Title

REV DESCRIPTION DATE

1:50

01.03.2019

A368Information Only - For Client Comment

16/12/191

Flat Type 1A Plan- ALT_Island Bench

Neometro & Milieu

Wilson Avenue, Brunswick

Wilson Ave

1.13 5

MSKR

For Information Only

Notes

2 17/1/20Information Only3 22/1/20Information Only4 28/1/20Information Only 5 4/2/20Information Only

FRIDGE F PANTRY P STORE S QUEEN BED Q WASHING MACHINE WM DISHWASHER DWFLUTED GLAZING FGPRIVACY SCREEN PS

N

BLACK STREET

WILSON AV

E

LANE

203 205204 206 207

208209201202

WM

DW PF S

Q