Embed Size (px)
Citation preview
Wilo-Vertical Turbine
SEA Edition - 2018 – 50 Hz
Wilo - VT+ – Edition 2018 – 50 Hz – Subject to change without prior notice.
2Vertical Turbine Pump for Water Supply and Industrial Process
Wilo-Vertical Turbine
DesignVertical turbine pumps for dry well installation with submerged axial or semi-axial hydraulics.
Special features/product advantages
→ Minimum surface area needed→ High hydraulic efficiency→ Submerged pump hydraulics→ Design to order as per customer specifications
Application
→ Industrial or municipal water supply→ Irrigation→ Fire fighting/general industry→ Cooling water for power plant→ Dewatering→ Flood control/condensate extraction
Materials
→ Impeller: Cast iron, bronze stainless steel, Ni-CI, cast steel, duplex, super duplex→ Diffuser: Cast iron, stainless steel, Ni-CI, cast steel duplex, super duplex→ Shaft: Stainless steel (EN8, EN19, SS304, SS410, SS410H, SS316L, UNS)→ Shaft sleeve: Carbon steel (EN8), stainless steel (SS304, SS410, SS410H, SS316L,UNS)→ Cast wear ring: Cast iron, Bronze stainless steel, Ni-CI→ Intermediate bearing: FINOCOT, THORDON, FEROFORM cut-less rubber→ Bell mouth: Cast iron, stainless steel, Ni-CI, cast steel, duplex, super duplex→ ¹RM Pipes: Mild steel, stainless steel → ²DBMS: Mild steel, stainless steel → ¹RM Pipes: Rising main pipe → ²DBMS: Delivery bend cum mottor stool Note: Pump with other material combinations available on request
Facility & Capabilities
→ Large pump test bed for flows up to 60000 m³/hr→ EOT crane capacity 60 ton→ Standard pump test bed for end suction, horizontal split case pumps flows up to 30000 m³/hr → NPSH testing capable for flows to 6000 m³/hr→ Full speed tests up to 4.5 mega watt→ Testing capability of a complete engine driven pump
Wilo-Vertical Turbine
Technical data
→ Series: CNE, VMF,VMP*, VAF*, VMFO**→ Flow range: Up to 6000 m³/hr→ Head range: Up to 450 m→ Operating temperature: Up to 80°C. higher on request→ Installation: Above floor, below floor→ Trust bearing lubrication: Grease, oil→ Line shaft bearing lubrication: Self, forced (external)→ Bowl Assembly: Pull out or non-pull out Note: ++Higher flow available on request *VMP & VAF pumps are with propeller type impellers *VMFO pumps are with semi open type impellers
Equipment/function
→ For types of installations with pressure port, for concealed floor, floor-mounted or twin-ceiling installation.→ Design: - As removable or permanent installation - With axial or semi-axial, single or multistage hydraulics - With open shaft for bearing lubrication with the fluid, or with shaft trim for separate bearing lubrication→ Drive options: Electric motor, diesel motor or stream turbine.
Wilo - VT – Edition 2018 – 50 Hz – Subject to change without prior notice.
3 Vertical Turbine Pump for Water Supply and Industrial Process
Wilo-Vertical Turbine Technical Data
Note: For motors 8 pole and up please inquire to Wilo Office.
P.T. Wilo Pumps IndonesiaAltira Business Park, Block A-01Jalan Yos Sudarso Kav. 85,Sunter JayaJakarta, 14350, IndonesiaT +62-21-2188-2328/29/30www.wilo.com
WILO SENortkirchenstraße 100D-44263 DortmundGermanyT +49 231 4102-0F +49 231 [email protected]
SEA/VT/LE201815
