Upload
willhomewood
View
217
Download
0
Embed Size (px)
Citation preview
7/28/2019 Will Homewood Portfolio
1/22
Will Homewood
First Year Product Design and Manufacture BEng
7/28/2019 Will Homewood Portfolio
2/22
Contents
1. TV Remote Control and Outdoor
Seating University Project
3. School Project
5. Presentation Techniques
2. Stationery Rack University Project
4. Work Experience Project
7/28/2019 Will Homewood Portfolio
3/22
twisting action to control volume,
channel and other variables
compacts into
easy to hold ball
shape with only
the most used
controls readily
available
TV Remote Control andOutdoor SeatingUniversity Project
The following two projects were university assignmentsto practice drawing and modeling techniques and toshow innovation and creativity in concepts generated.
7/28/2019 Will Homewood Portfolio
4/22
Styrofoam and
card model made
to analyze
ergonomics and
button layout
The TV Remote Control concept was chosen to be madeinto a model. A lathe was used to create the perfectlyspherical end pieces and cylindrical shaft and ring pieces.
TV Remote Control andOutdoor SeatingUniversity Project
7/28/2019 Will Homewood Portfolio
5/22
After some initial shape exploration and inspiration fromGerritRietveldsZig ZagChair , assembly considerationswere taken into account.
TV Remote Control andOutdoor SeatingUniversity Project
7/28/2019 Will Homewood Portfolio
6/22
Aluminum or stainless steel bars used to constructoriginal chair shape since this would provide a strongerstructure and better drainage for rainwater.
TV Remote Control andOutdoor SeatingUniversity Project
7/28/2019 Will Homewood Portfolio
7/22
Outdoor Seating Final Concept DrawingTV Remote Control andOutdoor SeatingUniversity Project
7/28/2019 Will Homewood Portfolio
8/22
Stationery RackUniversity Project
The focus of this design project was more concentratedon manufacturability of the product. Specifically, the briefstated that injection molding was to be used.
7/28/2019 Will Homewood Portfolio
9/22
Stationery RackUniversity Project
General dimensions of stationery were considered and theoverall shape was developed.
7/28/2019 Will Homewood Portfolio
10/22
Stationery RackUniversity Project
Minor developments were made and understanding of theunit in context was required.
7/28/2019 Will Homewood Portfolio
11/22
Stationery RackUniversity Project
Exact dimensions relating to the users hand and thecontents of the rack were conceived and smalladjustments were made to the product.
7/28/2019 Will Homewood Portfolio
12/22
Stationery RackUniversity Project
Since a maximum wall thickness and draft angle are requiredfor injection molding, optimum dimensions had to beaccurately calculated using a mathematical relationship.
7/28/2019 Will Homewood Portfolio
13/22
Stationery RackUniversity Project
All slot dimensions were optimized, some of which are notshown.
7/28/2019 Will Homewood Portfolio
14/22
Stationery RackUniversity Project
Final engineering drawing with all necessary dimensionsincluded.
7/28/2019 Will Homewood Portfolio
15/22
GCSE Guitar Rack Projecttargeted towards amateur guitarplayers in need of a unit to store guitars.
Ability to rotate using a LazySusan ball bearingcomponent.
Capable of holding up to fiveelectric, acoustic or bass guitars.
Small storage box for guitaraccessories.
Painted aluminum hookscapable of folding up whennot in use.
School Project
7/28/2019 Will Homewood Portfolio
16/22
Work Experience Project Brief was to design packaging for premium beveragebusiness Diageo.
Packaging would have to hold four smallbottles and a free gift towel.
It would to be sold in airports so wouldneed to attract holiday goers
7/28/2019 Will Homewood Portfolio
17/22
Presentation Techniques The following pages are examples of exercises andassignments set to develop 3D, engineering and CADdrawing skills.
Bold outline (above) used as anunderlay to make minor adjustmentsto overall product.
7/28/2019 Will Homewood Portfolio
18/22
Presentation Techniques Engineering drawing 1 - half sections and dimensioning
7/28/2019 Will Homewood Portfolio
19/22
Presentation Techniques Engineering drawing 2auxiliary projection
7/28/2019 Will Homewood Portfolio
20/22
Presentation Techniques Engineering drawing 3assembly drawing
7/28/2019 Will Homewood Portfolio
21/22
Presentation Techniques CAD assignment to accurately create a knife on CreoParametric 1.0.
7/28/2019 Will Homewood Portfolio
22/22
Presentation Techniques CAD assignment to practice assembly of components.