Wi-Reader Pro

For iOS User

1. Plug internet cable in the network connector(RJ-45) of Wi-Reader Pro.2. Switch Wi-Reader Pro to ” ” (WiFi mode.)3. Go to Setting – WiFi and select Wi-Reader Pro_xxxxxx (6-digit combination) of iDevice(iPad, iPhone, iPod touch).

4. Open the broser of iDevice and go to 10.10.1.15. Tap on “Settings” on the up-right of the page.

6. Select “Gateway” and tap on Next.

7. LAN Interface Setup: please tap on Next.

8. WAN Interface Setup: a. If get on Internet through internet cable at a hotel room, pleased select the default “DHCP Client” and tap on Next.

b. If get on internet through ADSL modem, please select PPPoE and fill in username/ password provided by ISP(Internet Service provider.) Then tap on Next.

9. Wireless Basic Settings: you can change SSID of Wi-Reader Pro here or tap on Next directly.

10. Wireless Security Setup: you can set the password of WiFi here or tap on Next directly.

11. Complete Setting: please wait for the Wi-Reader Pro reboot. After reboot you may to go to Settings- WiFi and reconnect to Wi-Reader Pro_xxxxxx.

12. Enjoy the wireless network.

Super easy-to-use wireless card reader

Create a WiFi hotspot in minutes

1. Download Wi-Reader App on Apple App Store.

2. Plug USB flash drive / SD card, and switch Wi-Reader Pro to “ ” (WiFi mode) till the blue led is flickering. 3. Go to Setting – WiFi and select Wi-Reader Pro_xxxxxx(6-digit combination) of iDevice (iPad, iPhone, iPod touch).

4. Tap on Wi-Reader App; you can browse your files now. Support file formats: Video：M4V / MP4 / MOV Music：MP3 / WAV / AAC Picture：JPG / BMP / PNG / GIF Document：PDF / DOC / PPT / TXT / HTM/XLS

If they are picture files, you can download the files to Photos on iPad /iPhone or Collections section of Wi-Reader App

Tap on Collections of Wi-Reader App; select the files you want to upload to SD card / USB flash drive.

You can download selected files from SD card/ USB flash drive to Collections section of Wi-Reader App.

You can choose to upload from Camera Roll; upload pictures tool by iPad, iPhone, and iPod touch.

Choose a location you want to upload files.

Tap on “Done.” The upload progress will start immediately.

6. Upload files

For continuous usage, please power Wi-Reader Pro with USB power adapter.

5. Download files

iOS

DW17DW17

Please go to www.apotop.com.tw

Product Center for complete User Manual.

Wi-Reader Pro

4. Tap on Wi-Reader Pro App; you can browse your files now. Support file formats: Video：to watch videos in Wi-Reader Pro App, please download MX Player or MoboPlayer on Play Store.Music：MP3 / WAV / AACPicture：JPG / BMP / PNGDocument：For HTC/ Samsung Android Phone: please use built-in Polaris office; other Android Phones please download OliveOffice on Play Store.

Tap on Collections of Wi-Reader App; select the files you want to upload to SD card / USB flash drive.

You can download selected files from SD card/ USB flash drive to Collections section of Wi-Reader Pro App. Tap the icon ” ” on top-right; you can select the files you wantto download.

Tap on “Upload” from Smartphone.

Tap on the files you want to upload; choose a location you want to upload the files.

Tap on “Upload.” The upload progress will start immediately.

6. Upload files

5. Download files

DW17DW17

Android For Android OS User

Micro-USB port:‧for PC as a standard card reader.‧for recharging built-in battery.

Reset Button

Function switch:

for enabling WiFi mode.

for powerbank function.

RJ-45 cable

Support SD card

Support USB Flash drive

Micro-USB port:‧for PC as a standard card reader.‧for recharging built-in battery.

Reset Button

Function switch:

for enabling WiFi mode.

for powerbank function.

RJ-45 cable

Support SD card

Support USB Flash drive

Super easy-to-use wireless card reader

1. Download Wi-Reader Pro App on Google Play Store.

2. Plug USB flash drive / SD card, and switch Wi-Reader Pro to ” ” (WiFi mode) till the blue led is flickering.

3. Go to Setting-WiFi and select Wi-Reader Pro_xxxxxx (6-digit combination) of Android Device.

8. WAN Interface Setup: a. If get on Internet through internet cable at a hotel room, pleased select the default “DHCP Client” and tap on Next.

b. If get on internet through ADSL modem, please select PPPoE and fill in username/ password provided by ISP(Internet Service provider.) Then tap on Next.

9. Wireless Basic Settings: you can change SSID of Wi-Reader Pro here or tap on Next directly.

10. Wireless Security Setup: you can set the password of WiFi here or tap on Next directly.

11. Complete Setting: please wait for the Wi-Reader Pro reboot. After reboot you may to go to Settings- WiFi and reconnect to Wi-Reader Pro_xxxxxx.

12. Enjoy the wireless network.

4. Open the broser of Android Device and go to 10.10.1.15. Tap on “Settings” on the up-right of the page.

6. Select “Gateway” and tap on Next.

7. LAN Interface Setup: please tap on Next.

Create a WiFi hotspot in minutes

For continuous usage, please power Wi-Reader Pro with USB power adapter.

Please go to www.apotop.com.tw

Product Center for complete User Manual.

1. Plug internet cable in network connector (RJ-45) of Wi-Reader Pro.

2. Switch Wi-Reader Pro to ” ” (WiFi mode.)

3. Go to Wi-Fi Setting and select Wi-Reader Pro_xxxxxx (6-digit combination) of Android Phone/ tablet.

After complete selecting files, please tap the icon ” ”on the top-left. The function menu will be shown for Download,Export, Rename, Move, or Delete the selected files.

FCC Compliance and Advisory StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:1.Reorient the receiving antenna.2.Increase the separation between the equipment and receiver.3.Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.4.Consult the dealer or an experienced radio/TV technician for help.Any special accessories needed for compliance must be specified in the instruction manual.

Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment.CAUSION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

FCC Compliance and Advisory StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:1.Reorient the receiving antenna.2.Increase the separation between the equipment and receiver.3.Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.4.Consult the dealer or an experienced radio/TV technician for help.Any special accessories needed for compliance must be specified in the instruction manual.

Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment.CAUSION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.