Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
The Max-Pak Difference
BUILT TOUGHWe don’t built a light weight machine.Max-Pak balers will outlast other balers
because we use tubular steel forstructural integrity, and heavy gaugeabrasion resistant steel for high stress
areas like the packing platen, floor andside walls. The base frame of a Max-
Pak baler has never been bent ordistorted. Never. There are solid
reasons Max-Pak balers stay on thejob, year after year. It’s how we build
them and what our customers expect.
QUALITY COMPONENTSMax-Pak reliability is built into each machine, with qualitycomponents we’ve tested and learned to trust for years ofdependable service. Electrical and hydraulic systems aredesigned for longevity, like UL Listed control panels andTEFC Motors. Hydraulic system components like pumpsand cylinders are engineered to withstand much higherpressures than you’ll actually use on the job. Over-engineered? Perhaps. But a hydraulic system that can standup to 5,000 psi pressures while actually running at peakdemand of 3,000 psi will run cooler. And cooler hydraulicsystems perform better and last longer. At Max-Pak,reliability doesn’t just happen. It’s carefully planned.
ABOVE AND BEYONDMax-Pak service and support is even stronger than the
machines we build. We take personal pride in every balerwe sell and every customer we serve. It’s comes from oursmall-town culture, a big part of who we are. That’s why
we install Max-Pak balers ourselves, using Max-Pakfactory-trained technicians. The same team that deliversyour baler will install it, run extensive tests to make sure
everything is up to our standards, and then train youroperators before we leave.
But when we walk out the door, it doesn’t mean you’realone. Max-Pak technical support is available 24/7 on our
toll-free hotline. Over 300 qualified service centers arestanding by in the unlikely event you ever have a problemwith your Max-Pak baler. Replacement parts are available
direct from our factory, and trained technicians can bedispatched quickly to your location if the need arises. Call
it peace of mind. It comes with every Max-Pak baler.
Max-Pak Offers A Full Line of Baling and Recycling EquipmentCall Us For More Information, or to Locate Your Nearest Dealer.
Vertical Balers
Containers Compactors Conveyors Trailers
Horizontal Closed End Balers Full Eject Balers Auto-Tie Balers
Waste Processing Equipment, Inc.260 Dilbeck Road / P.O. Box 1047 • Rainsville, AL 35968
Toll Free: 800-225-6458
Fax: 256-638-8979 • Web Site: www.maxpakbalers.com • Email Sales: [email protected] • Email Service: [email protected]
Since 1976, Max-Pak has been making quality balersand compactors for the waste industry. It wassomething we HAD to do. You see, we’re also in thewaste paper recycling business, and 30 years ago wecouldn’t find a baler that performed the way weneeded. So we built our own.
Being in the waste business has its advantages whenyou’re designing a baler. Not only do we understandthe challenges and demands expected from a baler, weget to test and fine tune our ideas in a real workingenvironment – our own.
For our other baler customers, it means they get thebenefit of our front-line experience and ourdetermination to only build the best. A Max-Pak baler isnot good enough for our customers unless it’s goodenough for us.
At Max-Pak we take a personal interest in every machinewe sell, and every customer we serve. It comes from oursmall town heritage. It’s who we are. So it also makessense that we deliver and install every baler ourselves,and then train your operators before we leave. We wantyou to be a friend and a Max-Pak customer for a longtime. That’s part of our small town, small companymentality.
But make no mistake. Max-Pak is no lightweight when itcomes to balers. You’ll find our equipment in some ofthe most demanding industries, with some of the mostparticular companies.
Our customers have come to know and trust Max-Pakfor productivity, reliability, and integrity. So it’s nosurprise that over 90% of all Max-Pak balers ever builtare still on the job. And we plan to keep it that way.
Why Settle For Less?
The Max-Pak Two-Ram Baler is your choice for maximum throughput andproductivity. The Two-Ram is capable of processing P.E.T. bottles atthe rate of 6,750 lbs. and 9 bales per hour, with bale weights up to 1,000 pounds.The Two-Ram’s three-wall chamber and extended ram penetration will deliver dense bales withmaximum integrity. The auto-tie option will automatically secure your bales with as many as 13straps per bale. It means you’ll use less labor to produce plastic bales faster – bales that stack andtransport easily, driving down the cost of handling and delivery, while driving up your profits.
The HorizontalClosed End Full Eject Baler can
generate 5 bales per hour of P.E.T. bottles,processing up to 3,750 lbs. The closed door creates a three-
wall baling chamber, allowing extended penetration to within 6 inches of the packing wall todefeat the “memory” characteristics of plastics. All Max-Pak horizontal balers feature wide-mouthfeed openings to prevent bridging of materials and baler jamming, which keeps your productivity
moving and profit margin growing. The Full Eject is available in three productive configurations.
The largest of the Max-Pak Vertical Downstroke Balers, the MP60NFS is ideal for situations that require a smaller equipmentfootprint, but still demand high productivity from a baler. The NFS uses a powerful 10-inchcylinder operating at a maximum 3,000 psi to generate over 235,000 lbs. of packing force. Thepacking ram of the NFS achieves over 50% bale penetration in a totally enclosed packingchamber, producing bales that maintain their integrity through temperature changes andtransportation. Greater total thrust and higher system pressures put Max-Pak at the head of theclass when it comes to plastics recycling.
MAX-PAK TWO-RAM BALERS MP 2R 508 MP 2R 509 MP 2R 7510Main Pumps Piston - High Volume 60 GPM, High Pressure 34 Piston - High Volume 60 GPM, High Pressure 34 2 Piston - High Volume 120 GPM, High Pressure 34
System Pressure 2800 psi 2800 psi 2800 psi Operating, 3000 psi Maximum
Main Gathering Cyl., Bore x Rod x Stroke 8” x 5.5” x 96” 9” x 6” x 96” 10” x 7” x 110”
Ejection Cyl., Bore x Rod x Stroke 8” x 5.5” x 84” 9” x 6” x 84” 9” x 6” x 72”
Baler Door Cyl., Bore x Rod x Stroke 7” x 4” x 48” 7” x 4” x 48” 7” x 4” x 66”
Ram Face Pressure, Operating/Maximum 75 psi / 87 psi 95 psi / 110 psi 117 psi / 135 psi
Overall Platen Force, Operating/Maximum 130,690 lbs. 165,405 lbs. / 190,852 lbs. 204,204 lbs./ 235,620 lbs.
Oil Reservoir 350 gallons 400 gallons 450 gallons
Hydraulic Manifold Integral Relief, Regenerative Manifold Integral Relief, Regenerative Manifold Integral Relief, Regenerative Manifold
Filtration 5 micron 5 micron 5 micron
Motor 50HP, 230/460V, 3 Phase (standard) 50HP, 230/460V, 3 Phase (standard) 75HP, 230/460V, 3 Phase (standard)
Cooler Motor (2) 1/4 HP, 1750 RPM, 230/460V, 3PH (2) 1/4 HP 1750 RPM, 230/460V, 3PH (2) 1/4 HP, 1750 RPM, 230/460V, 3PH
Motor Type TEFC, across the line starting (standard) TEFC, across the line starting (standard) TEFC, across the line starting (standard)
Controls UL and CUL Listed, Allen Bradley SLC500 UL and CUL Listed, Allen Bradley SLC500 UL and CUL Listed, Allen Bradley SLC500
Photocell Infrared Type Infrared Type Infrared Type
Shipping Weight 39,000 lbs. (approximate) 40,000 lbs. (approximate) 42,000 lbs. (approximate)
Operational Footprint, incl. optional conveyor (all models) Length 480” x Width 264” x Height 192”
Frame Design (all models) Tube Steel Construction
Floor and Platen (all models) Standard Replaceable AR400 Steel Wear Surface Construction
Platen Guides (all models) Tongue and Groove Floor Guides and Adjustable Platen Hold DownLinen Phenolic Wear Side Guides
Gib Bars (all models) Wear Alloy or A 1018
Shear Blade (all models) T-1 Serrated Blade, Shearless Option
HYDRAULICS
ELECTRICAL
STRUCTURAL
MAX-PAK FULL-EJECT BALERS HCE 48 FE-207 HCE 60 FE-8 HCE 60 FE-9Main Pumps Piston - 46.5 GPM - Horsepower Limited Piston - 60 GPM - Horsepower Limited Piston - High Volume 60 GPM, High Performance 34 GPM
System Pressure 2800 psi / 3000 psi Maximum 2800 psi / 3000 psi Maximum 2800 psi / 3000 psi Maximum
Main Cylinder., Bore x Rod x Stroke 7” x 4” x 89” 8” x 5.5” x 89” 9” x 6” x 92”
Ram Face Pressure, Platen Force 62.12 psi / 84,666 lbs. 80.47 psi - 92.86 psi at Maximum / 130, 690 - 150,796 lbs. 101.85 psi - 111.54 psi at Maximum / 165,405 - 190,852 lbs.
Oil Reservoir 150 gallons 200 gallons 400 gallons
Hydraulic Manifold Integral Relief Integral Relief Integral Relief
Filtration 5 micron 5 micron 6 micron
Directional Valve 2-DO-8 2-DO-8 - Regenerative Optional Regenerative Hydraulic Circuit
Air/Oil Cooler Optional Optional Standard
Motor 20HP, 230-/460V, 3 Phase (standard) 30HP, 230/460V, 3 Phase (standard) 50HP, 230/460V, 3 Phase (standard)
Enclose NEMA 12 - Rated NEMA 12 - Rated NEMA 12 - Rated
Motor Type TEFC TEFC TEFC
Controls UL and CUL Listed UL and CUL Listed UL and CUL Listed
PLC Allen Bradley Micro Logix 1200 Allen Bradley Micro Logix 1200 Allen Bradley Micro Logix 1200
Shipping Weight 22,000 lbs. (approximate) 25,000 lbs. (approximate) 26,000 lbs. (approximate)
Operational Footprint, incl. optional conveyor (all models) Length 312” x Width 120” x Height 192”
Frame Design (all models) Channel and Tube Steel Construction
Floor Design (all models) Tube Steel Lattice Network
Platen Guides (all models) Adjustable Platen Hold Down, Linen Phenolic Wear Side Guides
Gib Bars (all models) A 1018
Shear Blade (all models) T-1 Alloy Steel, Serrated Split Blade Sheer
Options (all models) Conveyor Controls, Reduced Amperage Starting, Hoper Extension, Upper Photo Eyes
HYDRAULICS
ELECTRICAL
STRUCTURAL
VERTICAL BALER - MP60NFSMain Pumps Piston - 60 GPM Horsepower Limited Shipping Weight 22,000 lbs. (baler only)
System Pressure 3000 psi Maximum Operational Footprint, w/conveyor Length 240” x Width 120” x Height 156”
Main Cylinder., Bore x Rod x Stroke 10” x 7” x 52” Feeding Opening 30” x 64”
Door Cylinder., Bore x Rod x Stroke 3.5” x 2” x 10”
Feed Chute Cylinder, Bore x Rod x Stroke 2.5” x 1.375” x 10”
Ram Face Pressure / Overall Platen Force 145 psi / 235,620 lbs. Maximum
Oil Reservoir 150 gallons
Hydraulic Manifold 3- DO8 Pattern Directional Valves
Main Motor 30HP, 230-/460V, 3 Phase (standard) Semi-Automatic Bale Ejection System Retainer Dog System
Enclose NEMA 12 - Rated Platen Guides Soft Shift, Low Shock Hydraulic Circuit
Motor Type TEFC High Efficiency Factory Wired for Easy Installation Safety Interlock Circuit on Bale Door and Safety Gate
Controls UL Listed - PLC Controlled Counter Balanced Feed Door Easy to Open Tube Type Platen Guide System
Photocell LED Type
HYDRAULICS STRUCTURAL
ELECTRICAL FEATURES
The Max-Pak Two-Ram Baler is your choice for maximum throughput andproductivity. The Two-Ram is capable of processing P.E.T. bottles atthe rate of 6,750 lbs. and 9 bales per hour, with bale weights up to 1,000 pounds.The Two-Ram’s three-wall chamber and extended ram penetration will deliver dense bales withmaximum integrity. The auto-tie option will automatically secure your bales with as many as 13straps per bale. It means you’ll use less labor to produce plastic bales faster – bales that stack andtransport easily, driving down the cost of handling and delivery, while driving up your profits.
The HorizontalClosed End Full Eject Baler can
generate 5 bales per hour of P.E.T. bottles,processing up to 3,750 lbs. The closed door creates a three-
wall baling chamber, allowing extended penetration to within 6 inches of the packing wall todefeat the “memory” characteristics of plastics. All Max-Pak horizontal balers feature wide-mouthfeed openings to prevent bridging of materials and baler jamming, which keeps your productivity
moving and profit margin growing. The Full Eject is available in three productive configurations.
The largest of the Max-Pak Vertical Downstroke Balers, the MP60NFS is ideal for situations that require a smaller equipmentfootprint, but still demand high productivity from a baler. The NFS uses a powerful 10-inchcylinder operating at a maximum 3,000 psi to generate over 235,000 lbs. of packing force. Thepacking ram of the NFS achieves over 50% bale penetration in a totally enclosed packingchamber, producing bales that maintain their integrity through temperature changes andtransportation. Greater total thrust and higher system pressures put Max-Pak at the head of theclass when it comes to plastics recycling.
MAX-PAK TWO-RAM BALERS MP 2R 508 MP 2R 509 MP 2R 7510Main Pumps Piston - High Volume 60 GPM, High Pressure 34 Piston - High Volume 60 GPM, High Pressure 34 2 Piston - High Volume 120 GPM, High Pressure 34
System Pressure 2800 psi 2800 psi 2800 psi Operating, 3000 psi Maximum
Main Gathering Cyl., Bore x Rod x Stroke 8” x 5.5” x 96” 9” x 6” x 96” 10” x 7” x 110”
Ejection Cyl., Bore x Rod x Stroke 8” x 5.5” x 84” 9” x 6” x 84” 9” x 6” x 72”
Baler Door Cyl., Bore x Rod x Stroke 7” x 4” x 48” 7” x 4” x 48” 7” x 4” x 66”
Ram Face Pressure, Operating/Maximum 75 psi / 87 psi 95 psi / 110 psi 117 psi / 135 psi
Overall Platen Force, Operating/Maximum 130,690 lbs. 165,405 lbs. / 190,852 lbs. 204,204 lbs./ 235,620 lbs.
Oil Reservoir 350 gallons 400 gallons 450 gallons
Hydraulic Manifold Integral Relief, Regenerative Manifold Integral Relief, Regenerative Manifold Integral Relief, Regenerative Manifold
Filtration 5 micron 5 micron 5 micron
Motor 50HP, 230/460V, 3 Phase (standard) 50HP, 230/460V, 3 Phase (standard) 75HP, 230/460V, 3 Phase (standard)
Cooler Motor (2) 1/4 HP, 1750 RPM, 230/460V, 3PH (2) 1/4 HP 1750 RPM, 230/460V, 3PH (2) 1/4 HP, 1750 RPM, 230/460V, 3PH
Motor Type TEFC, across the line starting (standard) TEFC, across the line starting (standard) TEFC, across the line starting (standard)
Controls UL and CUL Listed, Allen Bradley SLC500 UL and CUL Listed, Allen Bradley SLC500 UL and CUL Listed, Allen Bradley SLC500
Photocell Infrared Type Infrared Type Infrared Type
Shipping Weight 39,000 lbs. (approximate) 40,000 lbs. (approximate) 42,000 lbs. (approximate)
Operational Footprint, incl. optional conveyor (all models) Length 480” x Width 264” x Height 192”
Frame Design (all models) Tube Steel Construction
Floor and Platen (all models) Standard Replaceable AR400 Steel Wear Surface Construction
Platen Guides (all models) Tongue and Groove Floor Guides and Adjustable Platen Hold DownLinen Phenolic Wear Side Guides
Gib Bars (all models) Wear Alloy or A 1018
Shear Blade (all models) T-1 Serrated Blade, Shearless Option
HYDRAULICS
ELECTRICAL
STRUCTURAL
MAX-PAK FULL-EJECT BALERS HCE 48 FE-207 HCE 60 FE-8 HCE 60 FE-9Main Pumps Piston - 46.5 GPM - Horsepower Limited Piston - 60 GPM - Horsepower Limited Piston - High Volume 60 GPM, High Performance 34 GPM
System Pressure 2800 psi / 3000 psi Maximum 2800 psi / 3000 psi Maximum 2800 psi / 3000 psi Maximum
Main Cylinder., Bore x Rod x Stroke 7” x 4” x 89” 8” x 5.5” x 89” 9” x 6” x 92”
Ram Face Pressure, Platen Force 62.12 psi / 84,666 lbs. 80.47 psi - 92.86 psi at Maximum / 130, 690 - 150,796 lbs. 101.85 psi - 111.54 psi at Maximum / 165,405 - 190,852 lbs.
Oil Reservoir 150 gallons 200 gallons 400 gallons
Hydraulic Manifold Integral Relief Integral Relief Integral Relief
Filtration 5 micron 5 micron 6 micron
Directional Valve 2-DO-8 2-DO-8 - Regenerative Optional Regenerative Hydraulic Circuit
Air/Oil Cooler Optional Optional Standard
Motor 20HP, 230-/460V, 3 Phase (standard) 30HP, 230/460V, 3 Phase (standard) 50HP, 230/460V, 3 Phase (standard)
Enclose NEMA 12 - Rated NEMA 12 - Rated NEMA 12 - Rated
Motor Type TEFC TEFC TEFC
Controls UL and CUL Listed UL and CUL Listed UL and CUL Listed
PLC Allen Bradley Micro Logix 1200 Allen Bradley Micro Logix 1200 Allen Bradley Micro Logix 1200
Shipping Weight 22,000 lbs. (approximate) 25,000 lbs. (approximate) 26,000 lbs. (approximate)
Operational Footprint, incl. optional conveyor (all models) Length 312” x Width 120” x Height 192”
Frame Design (all models) Channel and Tube Steel Construction
Floor Design (all models) Tube Steel Lattice Network
Platen Guides (all models) Adjustable Platen Hold Down, Linen Phenolic Wear Side Guides
Gib Bars (all models) A 1018
Shear Blade (all models) T-1 Alloy Steel, Serrated Split Blade Sheer
Options (all models) Conveyor Controls, Reduced Amperage Starting, Hoper Extension, Upper Photo Eyes
HYDRAULICS
ELECTRICAL
STRUCTURAL
VERTICAL BALER - MP60NFSMain Pumps Piston - 60 GPM Horsepower Limited Shipping Weight 22,000 lbs. (baler only)
System Pressure 3000 psi Maximum Operational Footprint, w/conveyor Length 240” x Width 120” x Height 156”
Main Cylinder., Bore x Rod x Stroke 10” x 7” x 52” Feeding Opening 30” x 64”
Door Cylinder., Bore x Rod x Stroke 3.5” x 2” x 10”
Feed Chute Cylinder, Bore x Rod x Stroke 2.5” x 1.375” x 10”
Ram Face Pressure / Overall Platen Force 145 psi / 235,620 lbs. Maximum
Oil Reservoir 150 gallons
Hydraulic Manifold 3- DO8 Pattern Directional Valves
Main Motor 30HP, 230-/460V, 3 Phase (standard) Semi-Automatic Bale Ejection System Retainer Dog System
Enclose NEMA 12 - Rated Platen Guides Soft Shift, Low Shock Hydraulic Circuit
Motor Type TEFC High Efficiency Factory Wired for Easy Installation Safety Interlock Circuit on Bale Door and Safety Gate
Controls UL Listed - PLC Controlled Counter Balanced Feed Door Easy to Open Tube Type Platen Guide System
Photocell LED Type
HYDRAULICS STRUCTURAL
ELECTRICAL FEATURES
The Max-Pak Two-Ram Baler is your choice for maximum throughput andproductivity. The Two-Ram is capable of processing P.E.T. bottles atthe rate of 6,750 lbs. and 9 bales per hour, with bale weights up to 1,000 pounds.The Two-Ram’s three-wall chamber and extended ram penetration will deliver dense bales withmaximum integrity. The auto-tie option will automatically secure your bales with as many as 13straps per bale. It means you’ll use less labor to produce plastic bales faster – bales that stack andtransport easily, driving down the cost of handling and delivery, while driving up your profits.
The HorizontalClosed End Full Eject Baler can
generate 5 bales per hour of P.E.T. bottles,processing up to 3,750 lbs. The closed door creates a three-
wall baling chamber, allowing extended penetration to within 6 inches of the packing wall todefeat the “memory” characteristics of plastics. All Max-Pak horizontal balers feature wide-mouthfeed openings to prevent bridging of materials and baler jamming, which keeps your productivity
moving and profit margin growing. The Full Eject is available in three productive configurations.
The largest of the Max-Pak Vertical Downstroke Balers, the MP60NFS is ideal for situations that require a smaller equipmentfootprint, but still demand high productivity from a baler. The NFS uses a powerful 10-inchcylinder operating at a maximum 3,000 psi to generate over 235,000 lbs. of packing force. Thepacking ram of the NFS achieves over 50% bale penetration in a totally enclosed packingchamber, producing bales that maintain their integrity through temperature changes andtransportation. Greater total thrust and higher system pressures put Max-Pak at the head of theclass when it comes to plastics recycling.
MAX-PAK TWO-RAM BALERS MP 2R 508 MP 2R 509 MP 2R 7510Main Pumps Piston - High Volume 60 GPM, High Pressure 34 Piston - High Volume 60 GPM, High Pressure 34 2 Piston - High Volume 120 GPM, High Pressure 34
System Pressure 2800 psi 2800 psi 2800 psi Operating, 3000 psi Maximum
Main Gathering Cyl., Bore x Rod x Stroke 8” x 5.5” x 96” 9” x 6” x 96” 10” x 7” x 110”
Ejection Cyl., Bore x Rod x Stroke 8” x 5.5” x 84” 9” x 6” x 84” 9” x 6” x 72”
Baler Door Cyl., Bore x Rod x Stroke 7” x 4” x 48” 7” x 4” x 48” 7” x 4” x 66”
Ram Face Pressure, Operating/Maximum 75 psi / 87 psi 95 psi / 110 psi 117 psi / 135 psi
Overall Platen Force, Operating/Maximum 130,690 lbs. 165,405 lbs. / 190,852 lbs. 204,204 lbs./ 235,620 lbs.
Oil Reservoir 350 gallons 400 gallons 450 gallons
Hydraulic Manifold Integral Relief, Regenerative Manifold Integral Relief, Regenerative Manifold Integral Relief, Regenerative Manifold
Filtration 5 micron 5 micron 5 micron
Motor 50HP, 230/460V, 3 Phase (standard) 50HP, 230/460V, 3 Phase (standard) 75HP, 230/460V, 3 Phase (standard)
Cooler Motor (2) 1/4 HP, 1750 RPM, 230/460V, 3PH (2) 1/4 HP 1750 RPM, 230/460V, 3PH (2) 1/4 HP, 1750 RPM, 230/460V, 3PH
Motor Type TEFC, across the line starting (standard) TEFC, across the line starting (standard) TEFC, across the line starting (standard)
Controls UL and CUL Listed, Allen Bradley SLC500 UL and CUL Listed, Allen Bradley SLC500 UL and CUL Listed, Allen Bradley SLC500
Photocell Infrared Type Infrared Type Infrared Type
Shipping Weight 39,000 lbs. (approximate) 40,000 lbs. (approximate) 42,000 lbs. (approximate)
Operational Footprint, incl. optional conveyor (all models) Length 480” x Width 264” x Height 192”
Frame Design (all models) Tube Steel Construction
Floor and Platen (all models) Standard Replaceable AR400 Steel Wear Surface Construction
Platen Guides (all models) Tongue and Groove Floor Guides and Adjustable Platen Hold DownLinen Phenolic Wear Side Guides
Gib Bars (all models) Wear Alloy or A 1018
Shear Blade (all models) T-1 Serrated Blade, Shearless Option
HYDRAULICS
ELECTRICAL
STRUCTURAL
MAX-PAK FULL-EJECT BALERS HCE 48 FE-207 HCE 60 FE-8 HCE 60 FE-9Main Pumps Piston - 46.5 GPM - Horsepower Limited Piston - 60 GPM - Horsepower Limited Piston - High Volume 60 GPM, High Performance 34 GPM
System Pressure 2800 psi / 3000 psi Maximum 2800 psi / 3000 psi Maximum 2800 psi / 3000 psi Maximum
Main Cylinder., Bore x Rod x Stroke 7” x 4” x 89” 8” x 5.5” x 89” 9” x 6” x 92”
Ram Face Pressure, Platen Force 62.12 psi / 84,666 lbs. 80.47 psi - 92.86 psi at Maximum / 130, 690 - 150,796 lbs. 101.85 psi - 111.54 psi at Maximum / 165,405 - 190,852 lbs.
Oil Reservoir 150 gallons 200 gallons 400 gallons
Hydraulic Manifold Integral Relief Integral Relief Integral Relief
Filtration 5 micron 5 micron 6 micron
Directional Valve 2-DO-8 2-DO-8 - Regenerative Optional Regenerative Hydraulic Circuit
Air/Oil Cooler Optional Optional Standard
Motor 20HP, 230-/460V, 3 Phase (standard) 30HP, 230/460V, 3 Phase (standard) 50HP, 230/460V, 3 Phase (standard)
Enclose NEMA 12 - Rated NEMA 12 - Rated NEMA 12 - Rated
Motor Type TEFC TEFC TEFC
Controls UL and CUL Listed UL and CUL Listed UL and CUL Listed
PLC Allen Bradley Micro Logix 1200 Allen Bradley Micro Logix 1200 Allen Bradley Micro Logix 1200
Shipping Weight 22,000 lbs. (approximate) 25,000 lbs. (approximate) 26,000 lbs. (approximate)
Operational Footprint, incl. optional conveyor (all models) Length 312” x Width 120” x Height 192”
Frame Design (all models) Channel and Tube Steel Construction
Floor Design (all models) Tube Steel Lattice Network
Platen Guides (all models) Adjustable Platen Hold Down, Linen Phenolic Wear Side Guides
Gib Bars (all models) A 1018
Shear Blade (all models) T-1 Alloy Steel, Serrated Split Blade Sheer
Options (all models) Conveyor Controls, Reduced Amperage Starting, Hoper Extension, Upper Photo Eyes
HYDRAULICS
ELECTRICAL
STRUCTURAL
VERTICAL BALER - MP60NFSMain Pumps Piston - 60 GPM Horsepower Limited Shipping Weight 22,000 lbs. (baler only)
System Pressure 3000 psi Maximum Operational Footprint, w/conveyor Length 240” x Width 120” x Height 156”
Main Cylinder., Bore x Rod x Stroke 10” x 7” x 52” Feeding Opening 30” x 64”
Door Cylinder., Bore x Rod x Stroke 3.5” x 2” x 10”
Feed Chute Cylinder, Bore x Rod x Stroke 2.5” x 1.375” x 10”
Ram Face Pressure / Overall Platen Force 145 psi / 235,620 lbs. Maximum
Oil Reservoir 150 gallons
Hydraulic Manifold 3- DO8 Pattern Directional Valves
Main Motor 30HP, 230-/460V, 3 Phase (standard) Semi-Automatic Bale Ejection System Retainer Dog System
Enclose NEMA 12 - Rated Platen Guides Soft Shift, Low Shock Hydraulic Circuit
Motor Type TEFC High Efficiency Factory Wired for Easy Installation Safety Interlock Circuit on Bale Door and Safety Gate
Controls UL Listed - PLC Controlled Counter Balanced Feed Door Easy to Open Tube Type Platen Guide System
Photocell LED Type
HYDRAULICS STRUCTURAL
ELECTRICAL FEATURES
The Max-Pak Difference
BUILT TOUGHWe don’t built a light weight machine.Max-Pak balers will outlast other balers
because we use tubular steel forstructural integrity, and heavy gaugeabrasion resistant steel for high stress
areas like the packing platen, floor andside walls. The base frame of a Max-
Pak baler has never been bent ordistorted. Never. There are solid
reasons Max-Pak balers stay on thejob, year after year. It’s how we build
them and what our customers expect.
QUALITY COMPONENTSMax-Pak reliability is built into each machine, with qualitycomponents we’ve tested and learned to trust for years ofdependable service. Electrical and hydraulic systems aredesigned for longevity, like UL Listed control panels andTEFC Motors. Hydraulic system components like pumpsand cylinders are engineered to withstand much higherpressures than you’ll actually use on the job. Over-engineered? Perhaps. But a hydraulic system that can standup to 5,000 psi pressures while actually running at peakdemand of 3,000 psi will run cooler. And cooler hydraulicsystems perform better and last longer. At Max-Pak,reliability doesn’t just happen. It’s carefully planned.
ABOVE AND BEYONDMax-Pak service and support is even stronger than the
machines we build. We take personal pride in every balerwe sell and every customer we serve. It’s comes from oursmall-town culture, a big part of who we are. That’s why
we install Max-Pak balers ourselves, using Max-Pakfactory-trained technicians. The same team that deliversyour baler will install it, run extensive tests to make sure
everything is up to our standards, and then train youroperators before we leave.
But when we walk out the door, it doesn’t mean you’realone. Max-Pak technical support is available 24/7 on our
toll-free hotline. Over 300 qualified service centers arestanding by in the unlikely event you ever have a problemwith your Max-Pak baler. Replacement parts are available
direct from our factory, and trained technicians can bedispatched quickly to your location if the need arises. Call
it peace of mind. It comes with every Max-Pak baler.
Max-Pak Offers A Full Line of Baling and Recycling EquipmentCall Us For More Information, or to Locate Your Nearest Dealer.
Vertical Balers
Containers Compactors Conveyors Trailers
Horizontal Closed End Balers Full Eject Balers Auto-Tie Balers
Waste Processing Equipment, Inc.260 Dilbeck Road / P.O. Box 1047 • Rainsville, AL 35968
Toll Free: 800-225-6458
Fax: 256-638-8979 • Web Site: www.maxpakbalers.com • Email Sales: [email protected] • Email Service: [email protected]
Since 1976, Max-Pak has been making quality balersand compactors for the waste industry. It wassomething we HAD to do. You see, we’re also in thewaste paper recycling business, and 30 years ago wecouldn’t find a baler that performed the way weneeded. So we built our own.
Being in the waste business has its advantages whenyou’re designing a baler. Not only do we understandthe challenges and demands expected from a baler, weget to test and fine tune our ideas in a real workingenvironment – our own.
For our other baler customers, it means they get thebenefit of our front-line experience and ourdetermination to only build the best. A Max-Pak baler isnot good enough for our customers unless it’s goodenough for us.
At Max-Pak we take a personal interest in every machinewe sell, and every customer we serve. It comes from oursmall town heritage. It’s who we are. So it also makessense that we deliver and install every baler ourselves,and then train your operators before we leave. We wantyou to be a friend and a Max-Pak customer for a longtime. That’s part of our small town, small companymentality.
But make no mistake. Max-Pak is no lightweight when itcomes to balers. You’ll find our equipment in some ofthe most demanding industries, with some of the mostparticular companies.
Our customers have come to know and trust Max-Pakfor productivity, reliability, and integrity. So it’s nosurprise that over 90% of all Max-Pak balers ever builtare still on the job. And we plan to keep it that way.
Why Settle For Less?
The Max-Pak Difference
BUILT TOUGHWe don’t built a light weight machine.Max-Pak balers will outlast other balers
because we use tubular steel forstructural integrity, and heavy gaugeabrasion resistant steel for high stress
areas like the packing platen, floor andside walls. The base frame of a Max-
Pak baler has never been bent ordistorted. Never. There are solid
reasons Max-Pak balers stay on thejob, year after year. It’s how we build
them and what our customers expect.
QUALITY COMPONENTSMax-Pak reliability is built into each machine, with qualitycomponents we’ve tested and learned to trust for years ofdependable service. Electrical and hydraulic systems aredesigned for longevity, like UL Listed control panels andTEFC Motors. Hydraulic system components like pumpsand cylinders are engineered to withstand much higherpressures than you’ll actually use on the job. Over-engineered? Perhaps. But a hydraulic system that can standup to 5,000 psi pressures while actually running at peakdemand of 3,000 psi will run cooler. And cooler hydraulicsystems perform better and last longer. At Max-Pak,reliability doesn’t just happen. It’s carefully planned.
ABOVE AND BEYONDMax-Pak service and support is even stronger than the
machines we build. We take personal pride in every balerwe sell and every customer we serve. It’s comes from oursmall-town culture, a big part of who we are. That’s why
we install Max-Pak balers ourselves, using Max-Pakfactory-trained technicians. The same team that deliversyour baler will install it, run extensive tests to make sure
everything is up to our standards, and then train youroperators before we leave.
But when we walk out the door, it doesn’t mean you’realone. Max-Pak technical support is available 24/7 on our
toll-free hotline. Over 300 qualified service centers arestanding by in the unlikely event you ever have a problemwith your Max-Pak baler. Replacement parts are available
direct from our factory, and trained technicians can bedispatched quickly to your location if the need arises. Call
it peace of mind. It comes with every Max-Pak baler.
Max-Pak Offers A Full Line of Baling and Recycling EquipmentCall Us For More Information, or to Locate Your Nearest Dealer.
Vertical Balers
Containers Compactors Conveyors Trailers
Horizontal Closed End Balers Full Eject Balers Auto-Tie Balers
Waste Processing Equipment, Inc.260 Dilbeck Road / P.O. Box 1047 • Rainsville, AL 35968
Toll Free: 800-225-6458
Fax: 256-638-8979 • Web Site: www.maxpakbalers.com • Email Sales: [email protected] • Email Service: [email protected]
Since 1976, Max-Pak has been making quality balersand compactors for the waste industry. It wassomething we HAD to do. You see, we’re also in thewaste paper recycling business, and 30 years ago wecouldn’t find a baler that performed the way weneeded. So we built our own.
Being in the waste business has its advantages whenyou’re designing a baler. Not only do we understandthe challenges and demands expected from a baler, weget to test and fine tune our ideas in a real workingenvironment – our own.
For our other baler customers, it means they get thebenefit of our front-line experience and ourdetermination to only build the best. A Max-Pak baler isnot good enough for our customers unless it’s goodenough for us.
At Max-Pak we take a personal interest in every machinewe sell, and every customer we serve. It comes from oursmall town heritage. It’s who we are. So it also makessense that we deliver and install every baler ourselves,and then train your operators before we leave. We wantyou to be a friend and a Max-Pak customer for a longtime. That’s part of our small town, small companymentality.
But make no mistake. Max-Pak is no lightweight when itcomes to balers. You’ll find our equipment in some ofthe most demanding industries, with some of the mostparticular companies.
Our customers have come to know and trust Max-Pakfor productivity, reliability, and integrity. So it’s nosurprise that over 90% of all Max-Pak balers ever builtare still on the job. And we plan to keep it that way.
Why Settle For Less?