Over the years, Vermeister has become aware of the need to protect the environment. The company has been involved in extensive research and development work for many years, in the aim of formulating products that can combine maximum performance on a professional level together with respect for the environment, paying particular attention to the needs of those using the products and those who have to live with them; these innovative solutions are the fruit of considerable investments, that today have enabled Vermeister to become an authority and a reference point in the world of wood floors.

The Vermeister R & D laboratories are constantly searching for solutions that are eco-compatible, both with regard to their formulation and to their production. The commitment we have made towards reducing our impact on the environment is also reflected in the different phases of the production cycle and product distribution, from the choice of raw materials to the manufacture, from the transportation to the recovery and disposal systems.

In the aim of achieving total environmental sustainability, at Vermeister we try to convey this philosophy to our product users, who in their turn wish to be recognized for their caring attitude towards ecology as well as their attention towards the health and safety of their customers: the end users.

Today, Vermeister is a Brand Leader in the market of products for wooden flooring. The continuous technological research, the in-depth studies into innovations in the sector and the visibility of the Brand are the keys to the company’s success and position of leadership on the market.

Vermeister is now present in over 40 countries throughout the world.

“When you need solutions thatsafeguard the environment and protect

your health, you can count on us”

2

the green evolution1975 Vermeister was founded.

1988 Launching of the first Idrosatwater based finishes.

1998 Launching of Idro 2K on the market.

1999 UNI EN ISO 9002 certification.

2000 Launching of the complete waterborneH20 product range.

2003 Launching of the UV Aqua rangefor the industrial sector.

2003 UNI EN ISO 9001:2000 certification for research and development.

2004 Launching of Aqua Tenax, the firsttwo component water based sealer.

2006 Start up of the new production system to reduce the emission of volatileorganic compounds.

2006 Launching of the silane adhesive Monosil, with EC1 certification.

2006 The “Zero” project was set up with the launching of Zero% the FIRSTtwo component solvent-free adhesive.

2007 Introduction of newS-XL - NSS – PASS technologies.

2007 Realization of the “Low Voc” project.

2007 Realization of the “100% Aqua” project, elimination of NMP from all products.

2008 Launching of Flame and Velvet

2010 Vermeister is the first Italian company to obtain EC1 certification for the water based finishing products.

2010 Launching of the new fireproof cycle with the water based Idro 2K FR finish.

2011 Launching of Zero Voc the firstemission-free finish in the world.

2012 The latest generation of silane adhesive Zeromono is launched. Primer Zero, Zero Deck, Zero Filler, join and extend the ZERO CONCEPT range.

3

Codifying our commitment towards mankind and the environment

EMICODE EC1

Emicode EC1 is a trademark belonging to GEV, Gemeinschaft Emissionskontrollierte Ver-legewerkstoffe, an association that controls the emissions of flooring products, adhesives and building materials, of which Vermeister SpA is an official member. EC1 corresponds to the “very low emission” class, the best available. Only those products which satisfy the most stringent requirements for the con-trol of emissions can be certified and labelled “EMICODE EC 1” or “EMICODE EC 1 PLUS”.

AIR QUALITY IMPROVEMENT(RULE 1113 ARCHITECTURAL COATINGS)

AQMD (SOUTH COAST AIR QUALITY MAN-AGEMENT DISTRICT) is an American pol-lution control agency. AQMD has drawn up the SUPER COMPLIANT ARCHITECTURAL COATINGS MANUFACTURERS LIST which groups together those manufacturers who have been able to formulate a product that complies with the very strict evaluation cri-teria applied by the institute in compliance with RULE 1113.

RULE 1168COMPLIANT

AIR QUALITY IMPROVEMENT(RULE 1168 ADHESIVE AND SEALANT APPLICATIONS)

As far as adhesives and sealants are con-cerned, AQMD has set restrictive parameters in compliance with RULE 1168, which estab-lishes limits for the content of VOC and pro-hibits the use of some substances considered to be extremely dangerous.

QUALITY MANAGEMENT SYSTEM CERTIFIED UNI EN ISO 9001:2008

A keenness to perform in-depth research has no value unless it is backed by an equally effi-cient organisation and for this reason, in Ver-meister we work using the “Quality Manage-ment System: UNI EN ISO 9001 : 2008” which enables us to: optimize the use of internal and external resources, qualify our presence on the market, reduce the production costs of goods and services and guarantee the consi-stency of our production.

CERTIQUALITY

In order to provide customers with the best guarantees, our products are tested for their performance, safety and environmental friendliness by the most authoritative institutes and independent bodies.

4

Codifying our solutions

IMPORTANT NOTE: The water based products are obviously not in a solvent base. Thanks to this play on words and an easy misinterpretation, water based products are often mistakenly defined as ”solvent free”. This is incorrect because even water based products contain solvents, their proper name being “coalescents”. Vermeister was the first company to formulate a water based finishing product, ZERO VOC, which is also “solvent free”.

PERMANENTANTI-SCRATCH SYSTEM

Thanks to the PASS system, the anti-scratch agents are distributed on the surface of the finish and remain “secured” to the polymer by means of indissoluble chemical bonds. In this way they are not removed by washing or by traffic so that the non-scratch proper-ties remain unchanged over time.

NANO SCALE SYSTEM

Thanks to the use of Nano technology, the NSS system produces coatings that stand out from the rest due to their exceptional resistance, especially their resistance to scratching.

SOLVENT FREE

The absence of solvents ensures a very low emission of volatile organic compounds, both during use and after the floor has been laid, guaranteeing a better work envi-ronment and a low environmental impact.

NMP FREE

NMP (N-methyl-pyrrolidone) is a solvent used in the production of water based finishes, which is classified as dangerous due to the possible negative effects it may have on the reproductive cycle. Since 2007 Vermeister has been formulating only NMP-free water based products.

FORMULATED WITH RENEWABLERAW MATERIALS

The use of green technologies and renew-able materials is fundamental for the com-petitiveness, sustainability and safety of medium and long term supply sources. In Vermeister we promote the use of renew-able raw materials in order to improve the performance and reduce the environmen-tal impact of our products.

LOW VOC

European directive EC 2004/42 set limits for the emission of volatile organic com-pounds (VOC) produced by the solvents contained in finishes. All Vermeister prod-ucts comply with these parameters.

SELF CROSS-LINKING SYSTEM

The Self Cross-Linking System S-XL, ena-bles compounds to be added to the coat-ings that activate after the evaporation of the water and give rise to a true chemical cross-linking. In this way performances are achieved similar to those of two component coatings with single component coatings as if component B had already been added to them.

PRHS TECHNOLOGY

The exclusive PRHS (PERFECT RIDGE HEIGHT SYSTEM) technology improves thespecific rheology of the product quite considerably in compliance with the UNI EN 14293:2006 specification, leading to a very spreadable adhesive with a perfect ridge height at any temperature.

EN 14904

The EN 14904 standard establishes the technical requirements that flooring for sports halls must satisfy.Particular attention is given to important requirements regarding safety and sports-related features that also concern the treatment of the wood floors. In this instance, consideration is given to: friction (i.e. non-slip prop-erties), resistance to wear and a mirror finish. The Vermeister products bearing this logo comply with the most stringent tests stated in the EN 14904 standard.

SPORTEN 14904

5

conceptOnly the use of products with a low environmental impact actually contributes towards safeguarding the environment. Sustainable development is our daily work, reducing the impact of our products on the health is our objective and limiting the emissions after application is our mission. The healthiness of home and work environments is becoming more and more important as each day passes and for this reason we are seeing a growing awareness on the part of our customers and end users who are increasingly mindful of aspects concerning the health.

Vermeister has become more and more committed over the years to carrying out research and developing products that safeguard the environment, the health of the user and those living where the products are applied. For many years the company has been involved in the study of a project which has taken shape today under the name ZERO CONCEPT, a range of products with an extremely low environmental impact and a very low content of volatile organic compounds, all formulated using renewable raw materials and offering a far superior chemical/mechanical performance.

Each product in the ZERO CONCEPT range guarantees a high level of comfort for living areas and contributes towards daily well-being by combining an aesthetic value with the naturalness of raw materials. Tested and certified by prestigious independent authorities for their high standard of quality and respect for precise environmental criteria, the products in the ZERO CONCEPT range are provided with a certificate and "EMICODE EC1" mark as a result of their very low emission of volatile organic compounds issued by GEV (Gemeinschaft Emissionskontrolierte Verlegewerkstoffe), an association of which Vermeister is an official member, which controls the emissions of flooring products, adhesives, and building materials.

ZERO CONCEPT is identified by a logo featuring a green world, which will be used to distinguish all the products that comply with these stringent and essential requirements for eco sustainability.It is important to remember that use of the ZERO CONCEPT products in a work cycle drastically reduces the emission of solvents and other volatile organic compounds.

Zero VOCSingle/two component waterborne finishing treatment

Protective waterborne finish that is completely solvent-free. ZERO VOC can be used both as a single component or as a two component finish after adding ZERO VOC BOOST. Produced with renewable raw materials, ZERO VOC is ideal for green building and when applied directly on the wood it leaves the shade unaltered and provides a very natural effect. ZERO VOC is the first specific product for wood flooring to join the SUPER COMPLIANT ARCHITECTURAL COATINGS MANUFACTURERS LIST.

QUICK FACTS

Low environmental impact certified EC1 PLUS

Zero Voc

Highly ecological – re-use of leftover product - no

wastage

Hardener has no hazard label

Solvent-free

Formulated with renewable raw materials

TECHNICAL NOTES

Completely dry (hours) 6

Dry for sanding (hours) 3

Degree of gloss - Zero VOC X-MATT 15 (gloss) 15

Degree of gloss - Zero VOC 30 30 (gloss) 30

Degree of gloss - Zero VOC 60 60 (gloss) 60

zero VOC level

Solvent-freeand Nmp-free

Extremely eco-friendly:any residue of catalysed

product can be used againwithout any waste.

A hardenerwith no

hazard label

EC 1 PLUScertificate.

Giving a helping handat work and a helping

hand to the environment.

ZERO VOC, the first finish in the worldthat has eliminated volatile substances.

Five to Zero!

5 Lt - 0,35 Lt BOOST

7

At Vermeister we rely heavily on information so that cu-stomers are aware of the commitments made by companies

like ours which work with determination in order to be able to guarantee safe products from every aspect at all times and with

rigorous consistency. We were the first company to introduce nano technology (NSS) in a coating system for wood floors, the first to per-

fect exclusive technologies such as S-XL and PASS, the result of serious commitments towards research in collaboration with the most important

international chemical companies.

We were the first to certify waterborne products according to the EMICODE EC 1 criteria, the first to produce a highly reliable product, IDRO 2K that

is sold and appreciated today throughout the world. At Vermeister we have always believed in waterborne products, investing heavily in ide-

as and innovations that have led us today to enjoy maximum cre-dibility. The products in the INNOVATION range are all NMP-free

and contain very low VOC values; as a result they guarantee the utmost respect for the environment and for man, while

offering maximum technical performance together with an impeccable appearance.

8

innovationrange of waterborne products

Since 1998, thousands of wood floor contractors in 40 countries throughout the world have chosen Vermeister's IDRO 2K for its extraordinary reliability.

Idro 2KTwo component waterborne finish

Two component polyurethane waterborne finish. In the “natural wood effect” version, IDRO 2K confers a natural appearance to floors together with a uniformity and cleanliness that can only be compared to the results achieved with impregnation cycles with oil and/or wax. Apart from these features regarding ap-pearance, IDRO 2K combines qualities of resistance to abrasion and to rubber marks never before achieved by waterborne products so it is even recommended for use on heavy duty flooring (in salons, shops, etc.). If it is applied directly without a sealer, it brightens up the colour of the wood quite considerably, without leading to yellowing over time.

QUICK FACTS

Low environmental impact certified EC1

Extraordinary chemical and mechanical resistance

TECHNICAL NOTES

Catalysis ratio (vol/vol) 10:1

Completely dry (hours) 12

Dry for sanding (hours) 12

Overcoating without sanding (hours) After 3, within 5

Degree of gloss 2K (gloss) 10

Degree of gloss 2K EXPORT (gloss) 30

Degree of gloss 2K SAT (gloss) 50

IDRO 2KSimply O.K.

5 + 1 Lt

5 Lt - 0,5 Lt IMPROVER

5 + 0,5 Lt

9

FlameTwo component waterborne sealer with toning effect

Two component waterborne sealer with a very low content of volatile organic compounds (VOC). The com-position of the product based on the latest generation of resins allows the wood to appear in almost the same way as traditional solvent based sealers. Unlike the latter, this product does not cause yellowing over time, preventing excessively dark or unnatural changes in the colour of the wood. This distinctive charac-teristic of FLAME has been achieved without penalizing other very important qualities such as resistance to the formation of overlapping, considerable coverage, ease of application and sanding. Thanks to its high level of solid content, FLAME in combination with the two component finishes in the INNOVATION range, allows a two coat cycle to be carried out.

QUICK FACTS

High toning power

High build property

Good sanding qualities

Low emission

Minimum overlapping

Ideal for 2 coat cycles

TECHNICAL NOTES

Catalysis ratio (vol/vol) 5:1

Dry for sanding (hours) 16

Overcoating without sanding (hours)

After 3, within 8

Aqua TenaxTwo component waterborne sealer

Two component waterborne sealer featuring a high level insulating capacity, excellent coverage, good sandability and ease of application. The most important feature of this sealer is that it minimizes problems of overlapping. AQUA TENAX has been formulated to give a pleasant shade to the wood without causing unwanted changes to the colour of those woods rich in tannin and other water soluble staining substances (oak, teak…). For this reason, it is recommended especially for difficult woods such as IPE LAPACHO when browning or reddening would be undesirable. Thanks to its high level of solid content, AQUA TENAX can be used in combination with the two component finishes in the INNOVATION range, to carry out two coat finishing cycles.

QUICK FACTS

Low environmental impact certified EC1

High build property

Good sandability

Low emission

Minimizes overlapping

Ideal for 2 coat cycles

TECHNICAL NOTES

Catalysis ratio (vol/vol) 5:1

Dry for sanding (hours) 12

Overcoating without sanding (hours)

After 3, within 6

5 + 1 Lt

5 + 1 Lt

10

Aqua Play 1Single component waterborne finish

Single component waterborne finish featuring considerable ease of application and an excellent flow re-sulting in floors with an impeccable appearance. Thanks to the S-XL technology, AQUAPLAY 1 has a good resistance to abrasion, scratching, scuff marks as well as a chemical resistance equal to two component systems. If it is also used as a sealer, it confers a particularly warm tone to the wood.

QUICK FACTS

Great ease of application

Good mechanical and chemical resistance

Toning effect (if applied directly on the wood)

TECHNICAL NOTES

Completely dry (hours) 6

Dry for sanding (hours) 4

Overcoating without sanding (hours)

After 1, within 3

Degree of gloss AQUA PLAY 1 X-MATT (gloss)

10

Degree of gloss AQUA PLAY 1 30 (gloss)

30

Degree of gloss AQUA PLAY 1 60 (gloss)

60

Degree of gloss AQUA PLAY 1 90 (gloss)

90

5 + 0,5 Lt

5 Lt

11

Aqua Play 2Two component waterborne finishTwo component waterborne finish featuring considerable ease of application with excellent flow resulting in floors with an impeccable appearance. The excellent mechanical resistance (to abrasion, scratching and scuff marks) and chemical resistance enable the product to be used in all those situations requiring a high quality finish. If it is also used as a sealer, it confers a particularly warm tone to the wood.

QUICK FACTS

Considerable ease of application

Excellent flow

Excellent mechanical and chemical resistance

Toning effect (if applied directly on the wood)

NOTE TECNICHE

Catalysis ratio (vol/vol) 10:1

Completely dry (hours) 16

Dry for sanding (hours) 16

Overcoating without sanding (hours)

After 3, within 5

Degree of gloss AQUA PLAY 2 X-MATT (gloss)

10

Degree of gloss AQUA PLAY 2 30 (gloss)

30

Degree of gloss AQUA PLAY 2 60 (gloss)

60

5 + 0,5 Lt

SoluzioneBlend of low volatile solvents for diluting waterborne systemsBlend of coalescences with graduated evaporation to be added to waterborne products to increase the open time and improve the workability. Recommended particularly for hotter periods of the year and for carrying out more demanding jobs.

QUICK FACTS

The addition of this product to coatings complying with

EC DIR. 2004/42 could raise the VOC value above the permitted limits.

TECHICAL NOTES

AppearanceTransparent liquid

Max. permitted dilution 10%

5 Lt

FillerWater based ready to use fillerWater based ready to use filler for sealing wood floors, fast drying and easy to sand. Ideal for waterborne and solvent based finishing cycles. Available in the shades: OAK, WALNUT and DOUSSIÉ.

QUICK FACTS

Ready to use

Easy to sand

TECHICAL NOTES

Application methodStainless steel or plastic American trowel

Dry for sanding (min.) 30

12 Kg

12

Gap FillerColoured acrylic sealer

GAP FILLER is an acrylic sealant in a solvent-free watery dispersion for wood and laminate floors.Available in the colours WHITE, MAPLE, OAK, DOUSSIÉ, MEDIUM WALNUT, DARK WALNUT and WENGÉ.

QUICK FACTS

Very elastic

Suitable for filling expansion joints

Suitable for gluing skirting boards

Can be sanded and overcoated

Removable with water when still wet

TECHNICAL NOTES

Open time (min.) 10-20

Flexibility 7 %

Overcoating (hours) 4-6

310 Ml

Doussié

MapleMedium walnut

Oak

Wengé

Darkwalnut

White

13

ZeromonoSingle component high performance adhesive with silanic termination

Single component moisture-cure silane-terminated adhesive that does not contain water, solvents, isocy-anates, epoxy or amino compounds and for this reason does not bear any health or risk warnings or sym-bols. The EC1 PLUS classification certifies the very low emission of volatile organic compounds both when being applied and once the floor is in use.

QUICK FACTS

Low environmental impact certified EC1 PLUS

Certified soundproofing qualities

(insulation from footsteps)

Certified Heat Resistance

No hazard labels

Exceptional adhesion

Permanent elasticity

Does not stain pre-finished floors, no marks

High level coverage

Perfect ridge height

NOTE TECNICHE

Open time (max. registration time) (min.) 45/60

Open time (surface skin formation time) (min.)

100/120

Ready for traffic (hours) 24

Interval before sanding (days) 4

Average coverage (g/m2) 800/1000

12 Kg

RULE 1168COMPLIANT

Zero DeckHigh performance eco-friendly water-oil for outdoor use

High performance impregnating water-oil formulated specifically for outdoor use. ZERO DECK not only brings out the smoothness but also brightens the tone of the wood. Free of heavy metal hardeners, it does not give rise to phenomena of self-combustion like traditional oils. Although its VOC values are insignifi-cant, ZERO DECK is a product for outdoor use and, therefore, EC1 classification is not provided for.

QUICK FACTS

Greater coverage compared with traditional products

Excellent shading property

Greater penetration in the wood compared with a solvent based product

Easy to restore: it does not require sanding

Protection against dry rot

Protection against UV rays

Prevents greying maintaining the natural colour of the wood

Excellent water repellence

TECHNICAL NOTES

Application method Roller, Brush or Pad

Average coverage per coat (g/m2) 50/100

Interval before the second coat (hours)

After 6, within 24

5 Lt

A wood floor is an investment in the true sense of the word and as such must be protected. Vermeister has

been giving wood flooring its undivided attention since 1975 and this concentration together with the experience ac-

quired enable us today to be a true reference point as far as the treatment and maintenance of wood floors are concerned. In fact,

it is proper maintenance that guarantees a long-lasting wood floor and for this reason we have formulated a range of “easy to use” and

extremely effective products to satisfy requirements for all types of treat-

ment or finish. While indoor floors have to cope with dust and commonly used chemical agents that may be spilt on the floor, outdoor floors (the

most difficult to maintain) have to be able to withstand all atmos-pheric agents. Vermeister Maintenance offers a system of very

high quality products, formulated with the utmost respect for man and the environment and which will make your wood

floor beautiful for life, because at Vermeister we take your investment to heart.

14

1 Lt

5 Lt

1 Lt

Detergente NeutroNeutral detergent for coated wood floors(routine maintenance)

A concentrated liquid with a powerful cleaning action and low level foaming; recommended for cleaning various surfaces such as coated wood floors, brickwork, marble, ceramic tiles, etc., without rinsing.

TECHNICAL NOTES

Dilution in water for routine cleaning 2-3% (approx. capful for every 2 litres of water)

Application method Cotton cloth, Vermeister Mop

Recommended frequency of use once-twice a week

1 Lt

IdronetMaintenance wax for coated wood floors(routine maintenance)

Self-polishing fragranced water based cleaner containing detergents and perfumed essences. IDRONET carries out a dual action: it cleans dirt and revives the original finish of the floor. It can be used to clean and protect all types of coated wood floors including those finished with waterborne products.

TECHNICAL NOTES

Dilution in water for ordinary cleaning 5% (approx. 1 capful for every litre of water)

Application method Cotton cloth, Vermeister Mop

Recommended frequency of use once-twice a month according to the traffic

1 Lt

15

maintenancemaintenance products

VERMEISTER S.p.A

Località Fornaci - 24050 Mornico al Serio (BG) - ITALYTel. +39 035 4428190 - Fax +39 035 4428075

www.vermeister.com - info@vermeister.com

Vermeister Iberica S.L.Avenida de Brasil, 17 PL 16 - 28020 MadridTel. +34 933841956 - Fax +34 934647331comercial@vermeister.eswww.vermeister.com

Cemil Topuzlu cad. no: 62/A PK 34728Caddebostan - Kadiköy - IstanbulTel. 90 (216) 3699050 - Fax 90 (216) 3580472info@vermeisterturkey.comwww.vermeisterturkey.com

Vermeister AmericaNew York, NY 10022info@vermeisterusa.comwww.vermeisterusa.com

119261, г. Москва, ул. Панферова, д. 12Tелефон: +7 (499) 783-55-80vermeister@vermeisterrus.ruwww.vermeisterrus.ru

DIRECT BRANCHES

Peabody Floor Supply119 Foster St. Rear Bldg. #4

Peabody, MA 01960Tel: 978-854-5061Fax: 781-623-0482

www.peabodyfloorsupply.com