WHEELEDLOADINGSHOVEL |426/426eHT/ZX · WHEELEDLOADINGSHOVEL|426/426eZX mm(ft-in) A Overalllengthwithstandardbucket 6 831(22-5) B Axletopivotpin1 096(3-7) C WheelBase 3000(9-8) D Axletotowhitch

MAX. ENGINE POWER: 123kW (165hp) MAX. OPERATING WEIGHT: 14730kg (32474lb) MAX. LOADER CAPACITY: 2.7m3 (3.5yd3)

WHEELED LOADING SHOVEL | 426/426e HT/ZX

mm (ft-in)

A Overall length with standard bucket 6831 (22-5)

B Axle to pivot pin 1096 (3-7)

C Wheel Base 3000 (9-8)

D Axle to counterweight face 1816 (5-11)

E Minimum ground clearance 442 (1-5)

F Height over exhaust 3192 (10-6)

G Width over cab 1400 (4-7)

H Width over tyres 2482 (8-2)

H1 Wheel track 1955 (6-5)

J Height over cab 3335 (10-11)

Pin height (maximum) 3906 (12-10)

Overall operating height 5095 (16-9)

Front axle weight kg (lb) 5574 (12289)

Rear axle weight kg (lb) 7126 (15710)

Total weight kg (lb) 12700 (27999)

Inside radius 2920 (9-7)

Maximum radius 5790 (19-0)

Articulation angle degrees ±40°

Data based on machine equipped with pin mounted 1.9m3 bucket with bolt-on toeplates and 20.5R25 XHA (L3) tyres.

426/426e HT – STATIC DIMENSIONS – Standard height arm

426/426e HT – STATIC DIMENSIONS – Standard height arm

A

B C D

E

F

G

H

H1

J

mm (ft-in)




D Axle to counterweight face 1816 (5-11)













Maximum radius over shovel 5985 (19-6)



426/426e HT – STATIC DIMENSIONS – High lift arm

426/426e HT – STATIC DIMENSIONS – High lift arm

A

B C D

E

F

G

H

H1

J

WHEELED LOADING SHOVEL | 426/426e ZX

mm (ft-in)




D Axle to tow hitch 1816 (5-11)








426/426e ZX – STATIC DIMENSIONS

mm (ft-in)







Maximum radius over shovel 5790 (19-0)


A

B C D

E

F

G

H

H1

J

MAX. ENGINE POWER: 123kW (165hp) MAX. OPERATING WEIGHT: 14720kg (31570lb) MAX. LOADER CAPACITY: 2.1m3 (2.8yd3)

WHEELED LOADING SHOVEL | 426/426e HT

Bucket mounting Direct Direct Direct Direct Direct Direct Quickhitch Quickhitch Quickhitch Quickhitch Quickhitch Quickhitch

Bucket type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose

Bucket equipment Tipped teeth Tipped teeth Reversible t/plate Reversible t/plate Reversible t/plate Reversible t/plate Tipped teeth Tipped teeth Reversible t/plate Reversible t/plate Reversible t/plate Reversible t/plate

Bucket capacity (SAE heaped) m3 (yd3) 1.8 (2.4) 2.0 (2.6) 1.9 (2.5) 2.1 (2.8) 2.4 (3.1) 2.7 (3.5) 1.8 (2.4) 2.0 (2.6) 1.9 (2.5) 2.1 (2.8) 2.4 (3.1) 2.7 (3.5)

Bucket capacity (struck) m3 (yd3) 1.556 (2.035) 1.765 (2.309) 1.616 (2.114) 1.830 (2.394) 2.057 (2.691) 2.346 (3.068) 1.554 (2.033) 1.749 (2.288) 1.594 (2.085) 1.787 (2.337) 2.057 (2.691) 2.346 (3.068)

Bucket width mm (ft-in) 2550 (8-4) 2550 (8-4) 2550 (8-4) 2550 (8-4) 2700 (8-10) 2700 (8-10) 2550 (8-4) 2550 (8-4) 2550 (8-4) 2550 (8-4) 2700 (8-10) 2700 (8-10)

Bucket weight kg (lb) 810 (1786) 850 (1875) 810 (1786) 850 (1875) 1136 (2500) 1211 (2664) 800 (1765) 850 (1875) 800 (1765) 850 (1875) 1136 (2500) 1211 (2664)

Maximum material density kg/m3 (lb/yd3) 2332 (3931) 2068 (3486) 2209 (3723) 1969 (3319) 1655 (2790) 1439 (2426) 2125 (3582) 1884 (3176) 2013 (3393) 1794 (3024) 1508 (2542) 1311 (2210)

Tipping load straight kg (lb) 9819 (21647) 9797 (21599) 9819 (21647) 9797 (21599) 9334 (20578) 9147 (20166) 8983 (19804) 8859 (19531) 8983 (19804) 8859 (19531) 8554 (18858) 8384 (18483)

Tipping load full turn kg (lb) 8396 (18510) 8271 (18234) 8396 (18510) 8271 (18234) 7944 (17514) 7774 (17139) 7650 (16865) 7537 (16616) 7650 (16865) 7537 (16616) 7243 (15968) 7085 (15619)

Payload kg (lb) 4198 (9254) 4136 (9118) 4198 (9254) 4136 (9118) 3972 (8757) 3887 (8569) 3825 (8433) 3768 (8307) 3825 (8433) 3768 (8307) 3621 (7983) 3542 (7809)

Maximum break out force kN (lbf) 138 (31000) 128 (28800) 138 (31000) 128 (28800) 123 (27620) 115 (25820) 121 (27270) 113 (25490) 121 (27270) 113 (25490) 106 (23800) 99 (22240)

M Dump angle maximum degrees 49° 49° 49° 49° 49° 49° 49° 49° 49° 49° 49° 49°

N Roll back angle at full height degrees 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58°

O Roll back at carry degrees 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48°

P Roll back at ground level degrees 43° 43° 43° 43° 43° 43° 43° 43° 43° 43° 43° 43°

Q Load over height mm (ft-in) 3627 (11-11) 3627 (11-11) 3612 (11-10) 3612 (11-10) 3610 (11-10) 3610 (11-10) 3627 (11-11) 3627 (11-11) 3612 (11-10) 3612 (11-10) 3610 (11-10) 3610 (11-10)

R Dump height (45° dump) mm (ft-in) 2817 (9-3) 2767 (9-1) 2944 (9-8) 2896 (9-6) 2860 (9-4) 2796 (9-2) 2697 (8-10) 2647 (8-8) 2848 (9-4) 2775 (9-0) 2739 (9-0) 2676 (8-9)

S Dig depth mm (ft-in) 50 (0-2) 50 (0-2) 47 (0-4.5) 47 (0-4.5) 47 (0-4.5) 47 (0-45) 50 (0-2) 50 (0-2) 47 (0-4.5) 47 (0-4.5) 47 (0-4.5) 47 (0-4.5)

T Reach at dump height mm (ft-in) 1071 (3-6) 1121 (3-8) 946 (3-1) 996 (3-3) 1028 (3-4) 1092 (3-7) 1191 (3-11) 1240 (4-1) 1052 (3-5) 1118 (3-8) 1149 (3-9) 1213 (4-0)

Reach maximum (45° dump) mm (ft-in) 1818 (6-0) 1868 (6-2) 1693 (5-7) 1743 (5-8) 1775 (5-10) 1839 (6-0) 1938 (6-4) 1987 (6-6) 1800 (5-11) 1865 (6-1) 1896 (6-3) 1960 (6-5)

Operating weight(includes 80kg operator and full fuel tank) kg (lb) 12700 (27999) 12740 (28087) 12700 (27999) 12740 (28087) 13025 (28715) 13100 (28881) 12980 (28616) 13030 (28726) 12980 (28616) 13030 (28726) 13316 (29356) 13390 (29520)

OP

RQ

S

T

M

N

426/426e HT – LOADER DIMENSIONS – Standard height arm

Assumes the machine is fitted with 1.9m3 shovelwith toeplates and Michelin 20.5R25 XHA (L3) tyres.

Tipping loads Dimensions

Op. weight Straight Full turn Vertical Width

Tyre size Manufacturer Type Rating kg (lb) kg (lb) kg (lb) mm (in) mm (in)

20.5 - 25 (crossply) Firestone SGG L2 -348 (-770) -245 (-540) -215 (-475) -9 (-0.354) +5 (+0.197)

20.5 - 25 (crossply) Goodyear SGL D/L L2 -216 (-476) -152 (-335) -134 (-295) -9 (-0.354) +5 (+0.197)

20.5 R 25 (radial) Goodyear RL - 2 + L2 +76 (+168) +54 (+120) +47 (+104) -9 (-0.354) +5 (+0.197)

20.5 R 25 (radial) Bridgestone VUT L2 -160 (-353) -113 (-250) -99 (-220) 0 0

20.5 R 25 (radial) Michelin XTLA L2 -160 (-353) -113 (-250) -99 (-220) -9 (-0.354) +5 (+0.197)

20.5 R 25 (radial) Bridgestone VMT L3 0 0 0 0 0

550/65 R 25 (radial) Michelin XLD L3 -120 (-265) -85 (-187) -75 (-165) 0 0

20.5 R 25 (radial) Michelin XRD1A L4 +332 (+732) +257 (+566) +206 (+454) +29 (+1.142) +8 (+0.315)

20.5 R 25 (radial) Michelin XMINED2 L5 +680 (+1500) +480 (+1060) +421 (+928) +29 (+1.1.42) -3 (-0.118)

20.5 R 25 (radial) Goodyear RL-5K L5 +600 (+1323) +423 (+933) +372 (+820) +29 (+1.142) -3 (-0.118)

620/75 R25 (radial) Michelin MEGA XBIB -107 (-235) -75 (-165) -67 (-148) +62 (+2.5) +258 (+10.2)

Optional additional bolt-on counterweight +380 (+838) +707 (+1559) +598 (+1318) 0 0

CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS



Bucket type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose





Bucket weight kg (lb) 810 (1786) 850 (1875) 810 (1786) 850 (1875) 1136 (2500) 1211 (2664) 800 (1765) 850 (1875) 800 (1765) 850 (1875) 1136 (2500) 1211 (2664)




Payload kg (lb) 3505 (7727) 3453 (7613) 3505 (7727) 3453 (7613) 3316 (7311) 3245 (7154) 3194 (7042) 3146 (6936) 3194 (7042) 3145 (6936) 3024 (6667) 2958 (6521)








S Dig depth mm (ft-in) 113 (0-4) 113 (0-4) 110 (0-4) 110 (0-4) 110 (0-4) 110 (0-4) 128 (0-5) 113 (0-4) 110 (0-4) 110 (0-4) 110 (0-4) 110 (0-4)




P

O

M

N

R

Q

S

T

426/426e HT – LOADER DIMENSIONS – High lift arm






20.5 - 25 (crossply) Goodyear SGL D/L L2 -216 (-476) -126 (-227) -111 (-246) -9 (-0.354) +5 (+0.197)







20.5 R 25 (radial) Michelin XMINED2 L5 +680 (+1500) +399 (+880) +350 (+772) +29 (+1.1.42) -3 (-0.118)


620/75 R25 (radial) Michelin MEGA XBIB -107 (-235) -62 (-137) -56 (-123) +62 (+2.5) +258 (+10.2)




OP

R

Q

S

T

N

M

426/426e ZX – LOADER DIMENSIONS





20.5 - 25 (crossply) Goodyear SGL L2 -54 (-119) -38 (-84) -33 (-73) -9 (-0.354) +5 (+0.197)







20.5 R 25 (radial) Michelin XMINED2 L5 +680 (+1500) +480 (+1060) +421 (+928) +29 (+1.142) -3 (-0.118)





Bucket type General purpose Penetration General purpose General purpose General purpose General purpose General purpose General purpose General purpose General purpose General purpose General purpose





Bucket weight kg (lb) 1040 (2290) 1140 (2515) 925 (2040) 1040 (2515) 1262 (2782) 1329 (2930 800 (1765) 850 (1875) 800 (1765) 850 (1875) 1136 (2504) 1211 (2670)




Payload kg (lb) 4136 (9118) 4079 (8993) 4185 (9226) 4136 (9118) 4025 (8874) 3992 (8801 3874 (8541) 3829 (8441) 3874 (8541) 3829 (8441) 3718 (8197) 3685 (8124)








S Dig depth mm (ft-in) 33 (0-1) 33 (0-1) 30 (0-1) 30 (0-1) 32 (0-1) 32 (0-1) 33 (0-1) 33 (0-1) 30 (0-1) 30 (0-1) 32 (0-1) 32 (0-1)






Widely spaced four ram geometry provides the combination of excellent visibility with high bucket torque characteristics throughoutthe working arc. The pin, bush and sealing design on all pivot points provide extended maintenance intervals.

LOADER – HT

Heavy duty three ram geometry providing high breakout forces with excellent loading characteristics. The pin, bush and sealingdesign on all pivot points provide extended maintenance intervals.

LOADER – ZX

6-cylinder wastegated turbo-charged, liquid cooled, direct injection common rail diesel. Air-to-air charge-air cooling ensure lowemissions and provides minimum fuel consumption. A remote sump oil drain facility simplifies servicing.

Type 4 stroke direct injection

Model QSB6.7

Capacity litres 6.7

Aspiration Turbo charged

Cylinders 6

Max gross power to SAE J1995/ISO 14396 kW (hp) @ 2000rpm 123 (165)

Rated gross power to SAE J1995/ISO 14396 kW (hp) @ 2200rpm 119 (160)

Nett power to SAE J1349/EEC 80/1269 kW (hp) @ 2200rpm 113 (152)

Max torque Nm (lbf.ft) @ 1400rpm 732 (540)

Emissions:-US EPA Tier 3, CARB Tier 3, EU Stage III.

ENGINE – 426e (TIER 3 EMISSIONS)

6-cylinder wastegated turbo-charged, liquid cooled, direct injection diesel. Air-to-air charge-air cooling ensure low emissions andprovides minimum fuel consumption. A remote sump oil drain facility simplifies servicing.

Type 4 stroke direct injection

Model BTAA5.9C

Capacity litres (in3) 5.9 (360)

Bore mm (in) 102 (4.0)

Stroke mm (in) 120 (4.75)

Aspiration Turbo charged

Cylinders 6

Max gross power to SAE J1995/ISO 14396 kW (hp) @ 2000rpm 113 (152)

Rated gross power to SAE J1995/ISO 14396 kW (hp) @ 2200rpm 112 (150)

Nett power to SAE J1349/EEC 80/1269 kW (hp) @ 2200rpm 106 (142)

Max torque Nm (lbf.ft) @ 1300rpm 633 (467)

Emissions:-Relevant standards EUNR MM Stage 2 USA CFR Part 89(Complies with EU/EPA “Off Highway” Construction Equipment Regulation Stage 2).

ENGINE – 426 (TIER 2 EMISSIONS)

4 wheel drive, automatic smooth shift transmission electrically operated selector and gear change incorporating a speed inhibitorand modulation for smooth, responsive on-the-move direction and ratio changes. Single stage integral torque converter4 forward and 3 reverse gears.

Type Smooth shift powershift

Make & model ZF 4WG 160

Torque converter stall ratio 2.549 : 1

1st gear kph (mph) 7.44 (4.6)

2nd gear kph (mph) 14.51 (9.0)

3rd gear kph (mph) 25.19 (15.6)

4th gear (forward only) kph (mph) 37.9 (23.5)

TRANSMISSION

Priority steer hydraulic system with emergency steering. Piston pump meters flow through steer valve @ 190 bar (2756 psi) toprovide smooth low effort response. Steering angle ± 40°. Steer rams located high in the chassis fabrication to provide protectionfrom damage. Adjustable steering column.

STEERING

A variety of tyre options are available including:20.5-25 SGG (L2). 20.5-25 SGL (L2). 20.5R25 RL-2+ (L2). 20.5R25 VUT (L2). 20.5R25 XLTA (L2). 20.5R25 VMT (L3).20.5R25 XHA (L3). 550/65R25 XLD (L3). 20.5R25 XRDIA (L4). 20.5R25 XMINED2 (L5). 20.5R25 RL-5K (L5).620-75 MEGA XBIB. 750-75 MEGA XBIB.

TYRES

Hydraulic power braking on all wheels, operating pressure 100 bar (1450psi). Dual circuit with accumulator back-up providemaximum safety under all conditions. Hub mounted, oil immersed, wheel speed, multi-plate disc brakes with organic linings areenvironmentally acceptable. Also available with sintered-linings for increased wear resistance , recommended in re-handling dutieswith extensive forward/reverse shuttling. Parking brake, mechanical type operating on transmission output shaft.

BRAKES

AXLES

Type Open differentials with epicyclic hub reduction (LSD optional)

Make & model ZF MT-L 3075 II (front) ZF MT-L 3065 II (rear)

Overall axle ratio 21.53:1

Rear axle oscillation 21°


Twin variable displacement piston pumps feed a “load sensing” system providing a fuel efficient and responsive distribution of power asrequired. Main services are servo actuated from a single lever (joystick) loader control. Auxiliary circuits controlled via additional leveror joystick mounted electrical buttons. Accumulator back-up is available to control loader in the event of loss of pump pressure.

Pump type Twin variable displacement piston pumps

Pump 1 max. flow l/min (UK gal/min) 132 (29)

Pump 1 max. pressure bar (lb/in2) 250 (3625)



Hydraulic cycle times at full engine revs seconds

Arms raise (full bucket) 4.4

Bucket dump (full bucket) 1.0

Arms lower (empty bucket) 2.7

Total cycle 8.1

Ram dimensions Bore Rod Closed centres Stroke

Bucket ram x2 mm (in) 100 (3.9) 60 (2.4) 1600 (63.0) 1055 (41.5)

Lift ram x2 mm (in) 110 (4.3) 60 (2.4) 1260 (49.6) 820 (32.3)

Steer ram x2 mm (in) 80 (3.1) 50 (2.0) 621 (24.4) 312 (12.3)

426/426e HT – LOADER HYDRAULICS

Resiliently mounted ROPS/FOPS structure (tested in accordance with ISO 3471-1 : 1986 / ISO 3449 : 1984). De-luxe operatorenvironment combines ergonomically located controls with a high level of appointment and low internal noise levels. Entry/exit isvia large rear hinged door and anti-slip steps. Excellent forward visibility is provided by a 3 section curved, laminated windscreenand low waistline. Extensive instrumentation includes electronic monitoring panel and display (EMS). Heating / ventilation providesbalanced and filtered air distribution throughout the cab via a powerful 11 kW capacity heater. The unitary construction allows easysealing and prevents ingress of dust. A transmission lock on the selector prevents inadvertent engagement and the loader controlscan be isolated for safe road travel. Noise level measured in accordance with 86/662/EEC, amendment 95/27/ECInterior pressure level : 73 Lp (A)Exterior power level : 105 Lw (A)

426/426e HT – CAB

24 volt negative ground system, 70 Amp alternator with 2 x 110 Amp hour low maintenance batteries. Isolator located in rearof machine. Ignition key start/stop and pre-heat cold start. Primary fuse box. Other electrical equipment includes quartz halogen,twin filament working lights, front/rear wash/wipe, heated rear screen, full road going lights, clock, gauge and warning lightmonitoring. Connectors to IP67 standard.

426/426e HT – ELECTRICAL SYSTEM

System voltage Volt 24

Alternator output Amp hour 70

Battery capacity Amp hour 2 x 110

litres (UK gal)

Hydraulic system 210 (46.3)

Fuel tank 230 (50.7)

Engine oil sump 14 (3.1)

Transmission oil system 27 (5.9)

Axle oil (front) 39 (8.6)

Axle oil (rear) 37 (8.4)

Engine coolant system 35 (7.7)

426/426e HT – SERVICE FILL CAPACITIES

An extensive range of attachments including pallet forks, crane jibs, high dumping buckets and timber grapples are available to fitdirectly or via the JCB quickhitch mounting.

426/426e HT – ATTACHMENTS

Loader: Bucket reset mechanism, loader arm kickout mechanism, loader control isolator, single lever servo control, high torquetrue parallel lift geometry combines with excellent visibility between the arms.

Engine: Air cleaner – 2 stage dry type – cyclonic with primary and safety elements, silencer and exhaust stack, sedimenter,twin bowl fuel filters, fan guards.

Transmission: Single lever shift control, speed inhibitor, neutral start, disconnect on footbrake and loader lever, disconnect isolatorswitch, direction changes and kickdown on gear selector and loader control lever.

Axles: Epicyclic wheel hub reduction, fixed front, oscillating rear.

Brakes:Multi-plate wet disc brakes, organic linings, dual circuit hydraulic power assisted. Parking disc brake on transmission output shaft.

Hydraulics: Piston pumps with priority steer, emergency steer back-up, 2 spool loader circuit with accumulator support,3rd spool auxiliary hydraulic circuit as standard. Hydraulic tank located in the rear chassis fabrication.

Steering: Adjustable steering column, “soft feel” steering wheel 5 turns lock to lock, resilient stops on max lock.

Cab: ROPS/FOPS safety structure, interior reading light, centre mounted master warning light. Electronic monitoring panel withLCD message display. Two speed intermittent front windscreen wipe/wash and self park, single speed rear windscreen wipe/washand self park. 3 speed heater/demisting with replaceable air filter, LH and RH opening windows, sun visor, internal rear view mirror,external mirrors, adjustable suspension seat with belt and headrest, operator storage facilities, laminated windscreen, heated rearscreen, loader control isolator, horn, adjustable armrest.

Electrical: Road lights front and rear, parking lights, front and rear working lights, reverse alarm and light, rear fog light, batteryisolator, radio wiring and speakers, 70 amp alternator, rotating beacon.

Bodywork: Front and rear fenders, side and rear access panels, flexible bottom step, full width rear counterweight, recovery hitch, lifting lugs.

426/426e HT – STANDARD EQUIPMENT

Air conditioning, limited slip differentials front/rear axles, Turbo 2 and dust buster pre-cleaner, tooth guard, replaceable bucketwearparts, epoxy coated radiator/coolers, automatically reversing cooling fan, stainless steel brake pipes, smooth ride system (SRS),hydraulic quickhitch, full rear fenders, reversing camera (colour), additional front and rear worklights, auto greasing system, joystick orMulti-lever hydraulic controls, auxiliary hydraulic control on seperate lever or joystick mounted (proportional), Smart reverse alarm,parallel lift links (recommended for pallet forks), canopy cab, Wastemaster cab, Livelink telematics, widecore radiator, sealed electrics,grease gun and cartridge, basic and full belly guard kits, mesh air intake screen, ARV kit, safety strut, transmission cooler bypass, non-heated mirrors, 24V to 12V in cab converter, cab screen guards, additional front and rear work lights, heated air suspension seat,heated mirrors, extra counterweight, light guards, front and rear blinds, engine block heater, biodegradable hydraulic oil, cab filtrationoptions, fire extinguisher, number plate light kit, auxiliary 4th spool hydraulic service, high lift arms, grease gun, LiveLink telematics.

426/426e HT – OPTIONAL EQUIPMENT

Machine as above including: basic and full belly guard kit, turbo 2 pre-cleaner, carbon cab air intake filter, front and rear light guards,widecore radiator, mesh air intake screen.

426/426e HT – WASTEMASTER STANDARD EQUIPMENT


An extensive range of attachments are available to fit directly or via the JCB quickhitch mounting.

426/426e ZX – ATTACHMENTS

Loader: Bucket reset mechanism, loader arm kickout mechanism, loader control isolator, single lever or multi lever servo control,high breakout forces with excellent loading characteristics.

Engine: Air cleaner 2 stage dry type – cyclonic with primary and safety elements, sedimenter, twin bowl fuel filters, alternator andair conditioning compressor drive belt guards, isolated cooling package with hydraulically driven cooling fan.

Transmission: Single lever shift control, speed inhibitor, neutral start, disconnect on footbrake and loader lever, disconnect isolatorswitch, direction changes and kickdown on gear selector and loader control lever.

Axles: Epicyclic wheel hub reduction, fixed front, oscillating rear.

Brakes: Multi-plate wet disc brakes, organic linings, dual circuit hydraulic power. Parking disc brake on transmission output shaft.

Hydraulics: Twin piston pumps with priority steer, emergency steer back-up, 2 spool loader circuit with accumulator support,3rd spool auxiliary hydraulic circuit as option.

Steering: Adjustable steering column, “soft feel” steering wheel 5 turns lock to lock, resilient stops on max lock.

Cab: ROPS/FOPS safety structure, interior reading light, centre mounted master warning light. Electronic monitoring panel withLCD message display. Two speed intermittent front windscreen wipe/wash and self park, single speed rear windscreen wipe/washand self park. 3 speed heater/demisting with replaceable air filter, LH and RH opening windows, sun visor, internal rear view mirror,external mirrors, adjustable suspension seat with belt and headrest, operator storage facilities, laminated windscreen, heated rearscreen, loader control isolator, horn, adjustable armrest.

Electrical: Road lights front and rear, parking lights, front and rear working lights, reverse alarm and light, rear fog light, batteryisolator, radio wiring and speakers, 70 amp alternator, rotating beacon.

Bodywork: Front and rear fenders, side and rear access panels, flexible bottom step, full width rear counterweight, recovery hitch, lifting lugs.

426/426e ZX – STANDARD EQUIPMENT

Air conditioning, limited slip differentials front/rear axles, Turbo 2 and dust buster pre-cleaner, tooth guard, replaceable bucketwearparts, epoxy coated radiator/coolers, automatically reversing cooling fan, stainless steel brake pipes, smooth ride system (SRS),hydraulic quickhitch, full rear fenders, reversing camera (colour), additional front and rear worklights, auto greasing system, joystickor Multi-lever hydraulic controls, auxiliary hydraulic control on seperate lever or joystick mounted (proportional),Smart reversealarm, canopy cab, Wastemaster cab, Livelink telematics, widecore radiator, sealed electrics, grease gun and cartridge, basic and fullbelly guard kits, mesh air intake screen, ARV kit, safety strut, transmission cooler bypass, 24V to 12V in cab converter, cab screenguards, additional front and rear work lights, heated air suspension seat, heated mirrors, extra counterweight, light guards, front andrear blinds, engine block heater, biodegradable hydraulic oil, cab filtration options, fire extinguisher, number plate light kit, auxiliary4th spool hydraulic service, grease gun, LiveLink telematics.

426/426e ZX – OPTIONAL EQUIPMENT

Twin variable displacement piston pumps feed a “load sensing” system providing a fuel efficient and responsive distribution of power asrequired. Main services are servo actuated from a single lever (joystick) loader control. Auxiliary circuits controlled via additional leveror joystick mounted electrical buttons. Accumulator back-up is available to control loader in the event of loss of pump pressure.

Pump type Twin variable displacement piston pumps





Hydraulic cycle times at full engine revs seconds

Arms raise (full bucket) 4.4

Bucket dump (full bucket) 1.3

Arms lower (empty bucket) 2.7

Total cycle 8.4

Ram dimensions Bore Rod Closed centres Stroke

Bucket ram x1 mm (in) 130 (5.1) 70 (2.8) 1100 (43.3) 521 (20.5)

Lift ram x2 mm (in) 110 (4.3) 60 (2.4) 1260 (49.6) 820 (32.3)

Steer ram x2 mm (in) 80 (3.1) 50 (2.0) 621 (24.4) 312 (12.3)

426/426e ZX – LOADER HYDRAULICS

24 volt negative ground system, 70 Amp alternator with 2 x 110 Amp hour low maintenance batteries. Isolator located in rearof machine. Ignition key start/stop and pre-heat cold start. Primary fuse box. Other electrical equipment includes quartz halogen,twin filament working lights, front/rear wash/wipe, heated rear screen, full road going lights, clock, gauge and warning lightmonitoring. Connectors to IP67 standard.

426/426e ZX – ELECTRICAL SYSTEM

System voltage Volt 24

Alternator output Amp hour 70

Battery capacity Amp hour 2 x 110

litres (UK gal)

Hydraulic system 210 (46.3)

Fuel tank 230 (50.7)

Engine oil sump 14 (3.1)

Transmission oil system 27 (5.9)

Axle oil (front) 39 (8.6)

Axle oil (rear) 37 (8.4)

Engine coolant system 35 (7.7)

426/426e ZX – SERVICE FILL CAPACITIES

Resiliently mounted ROPS/FOPS structure (tested in accordance with ISO 3471-1 : 1986 / ISO 3449 : 1984). De-luxe operatorenvironment combines ergonomically located controls with a high level of appointment and low internal noise levels. Entry/exit isvia large rear hinged door and anti-slip steps. Excellent forward visibility is provided by a 3 section curved, laminated windscreenand low waistline. Extensive instrumentation includes electronic monitoring panel and display (EMS). Heating / ventilation providesbalanced and filtered air distribution throughout the cab via a powerful 11 kW capacity heater. The unitary construction allows easysealing and prevents ingress of dust. A transmission lock on the selector prevents inadvertent engagement and the loader controlscan be isolated for safe road travel. Noise level measured in accordance with 86/662/EEC, amendment 95/27/ECInterior pressure level : 73 Lp (A)Exterior power level : 105 Lw (A)

426/426e ZX – CAB

Machine as above including: basic and full belly guard kit, turbo 2 pre-cleaner, carbon cab air intake filter, front and rear light guards,widecore radiator, mesh air intake screen.

426/426e ZX – WASTEMASTER STANDARD EQUIPMENT


426/426e HT – LOADER DIMENSIONS – FORK FRAME WITH FORKS – Standard height arm

BUCKET SELECTOR

Assumes the fitment of Michelin 20.5R25 XHA (L3) tyres Parallel fork Non parallel fork

Fork carriage width mm (ft-in) 1500 (4-11) 1500 (4-11)

Length of tines mm (ft-in) 1220 (4-0) 1220 (4-0)

A Reach at ground level mm (ft-in) 760 (2-6) 770 (2-6)

B Reach at arms horizontal mm (ft-in) 1545 (5-1) 1545 (5-1)

C Below ground level mm (ft-in) -52 (-0-2) -25 (-0-1)

D Arms, horizontal height mm (ft-in) 1906 (6-3) 1867 (6-1)

E Arms, maximum height mm (ft-in) 3718 (12-2) 3695 (12-1)

F Reach at maximum height mm (ft-in) 792 (2-7) 800 (2-7)

Payload* kg (lb) 5000 (11023) 5000 (11023)

Tipping load straight kg (lb) 7571 (16691) 7571 (16691)

Tipping load full turn (40°) kg (lb) 6492 (14312) 6492 (14312)

Attachment weight kg (lb) 440 (970) 440 (970)

*At the centre-of-gravity distance 500mm (1ft-51⁄2in). Based on 80% of full turn tipping load as defined by ISO 8313.Manual fork spacings at 50mm (2in) increments. Fork section 100mm x 50mm (4in x 2in).A

BC

D

E

F

Loose density Fill factor

Material kg/m3 lb/yd3 %

Snow (fresh) 200 337 110

Peat (dry) 400 674 100

Sugar beet 530 894 100

Coke (loose) 570 961 85

Barley 600 1012 85

Petroleum coke 680 1146 85

Wheat 730 1231 85

Coal bitumous 765 1290 100

Fertiliser (mixed) 1030 1737 85

Coal anthracite 1046 1764 100

Earth (dry) (loose) 1150 1939 100

Nitrate fertiliser 1250 2180 85

Sodium chloride (dry) (salt) 1300 2192 85

Cement Portland 1440 2428 100

Limestone (crushed) 1530 2580 100

Sand (dry) 1550 2613 100

Asphalt 1600 2698 100

Gravel (dry) 1650 2782 85

Clay (wet) 1680 2832 110

Sand (wet) 1890 3187 110

Fire clay 2080 3507 100

Copper (concentrate) 2300 3878 85

Slate 2800 4721 100

Magnetite 3204 5402 100

Bucketcapacity(m

3 )

2.7

2.4

2.1

2.0

1.9

1.8

800 1000 1200 1400 1600 1800 2000 2200

Material density (kg/m3)

100%

110% 95%

Bucket fill factors


426/426e HT – LOADER DIMENSIONS – FORK FRAME WITH FORKS – High lift arm

BUCKET SELECTOR

Assumes the fitment of Michelin 20.5R25 XHA (L3) tyres Parallel fork Non parallel fork

Fork carriage width mm (ft-in) 1500 (4-11) 1500 (4-11)

Length of tines mm (ft-in) 1220 (4-0) 1220 (4-0)

A Reach at ground level mm (ft-in) 1173 (3-10) 1183 (3-11)

B Reach at arms horizontal mm (ft-in) 1893 (6-3) 1893 (6-3)

C Below ground level mm (ft-in) 11 (0-0) 38 (0-1)

D Arms, horizontal height mm (ft-in) 1906 (6-3) 1867 (6-1)

E Arms, maximum height mm (ft-in) 4148 (13-7) 4125 (13-6)

F Reach at maximum height mm (ft-in) 954 (3-2) 962 (3-2)

Payload* kg (lb) 4518 (9960) 4518 (9960)

Tipping load straight kg (lb) 6587 (14521) 6587 (14521)

Tipping load full turn (40°) kg (lb) 5648 (12452) 5648 (12452)

Attachment weight kg (lb) 440 (970) 440 (970)

*At the centre-of-gravity distance 500mm (1ft-51⁄2in). Based on 80% of full turn tipping load as defined by ISO 8313.Manual fork spacings at 50mm (2in) increments. Fork section 100mm x 50mm (4in x 2in).

A

BC

D

E

F



Snow (fresh) 200 337 110

Peat (dry) 400 674 100


Coke (loose) 570 961 85

Barley 600 1012 85


Wheat 730 1231 85




Earth (dry) (loose) 1150 1939 100





Sand (dry) 1550 2613 100

Asphalt 1600 2698 100

Gravel (dry) 1650 2782 85

Clay (wet) 1680 2832 110

Sand (wet) 1890 3187 110

Fire clay 2080 3507 100


Slate 2800 4721 100

Magnetite 3204 5402 100

Bucketcapacity(m

3 )

2.7

2.4

2.1

2.0

1.9

1.8

800 1000 1200 1400 1600 1800 2000 2200


100%

110% 95%

Bucket fill factors


426/426e ZX – LOADER DIMENSIONS – FORK FRAME WITH FORKS

BUCKET SELECTOR

Fork carriage width mm (ft-in) 1500 (4-11)

Length of tines mm (ft-in) 1220 (4-0)

A Reach at ground level mm (ft-in) 770 (2-6)

B Reach at arms horizontal mm (ft-in) 1545 (5-1)

C Below ground level mm (ft-in) -42 (-0-2)

D Arms, horizontal height mm (ft-in) 1867 (6-1)

E Arms, maximum height mm (ft-in) 3695 (12-1)

F Reach at maximum height mm (ft-in) 800 (2-7)

Payload* kg (lb) 5260 (11596)

Tipping load straight kg (lb) 7722 (17024)

Tipping load full turn (40°) kg (lb) 6575 (14495)

Attachment weight kg (lb) 440 (970)

*At the centre-of-gravity distance 500mm (1ft-51⁄2in). Based on 80% of full turn tipping load as defined by ISO 8313.Assumes the fitment of Michelin 20.5R25 XHA (L3) tyres. Manual fork spacings at 50mm (2in) increments. Fork section 100mm x 50mm (4in x 2in).

A

BC

D

E

F



Snow (fresh) 200 337 110

Peat (dry) 400 674 100


Coke (loose) 570 961 85

Barley 600 1012 85


Wheat 730 1231 85




Earth (dry) (loose) 1150 1939 100





Sand (dry) 1550 2613 100

Asphalt 1600 2698 100

Gravel (dry) 1650 2782 85

Clay (wet) 1680 2832 110

Sand (wet) 1890 3187 110

Fire clay 2080 3507 100


Slate 2800 4721 100

Magnetite 3204 5402 100

Bucketcapacity(m

3 )

2.1

2.0

1.9

1.8

1000 1200 1400 1600 1800 2000 2200 2400


100%

110% 95%

Bucket fill factors

A GLOBAL COMMITMENT TO QUALITY

JCB’s total commitment to its products and customers has helped it grow from a one-man

business into Britain’s largest privately owned manufacturer of backhoe loaders, crawler excavators,

wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts,

industrial fork lifts, mini/midi excavators, skid steer loaders, tractors and compaction equipment.

By making constant and massive investments in the latest production technology, the JCB factories

have become some of the most advanced in the world.

By leading the field in innovative research and design, extensive testing and stringent quality control,

JCB machines have become renowned all over the world for performance, value and reliability.

And with a global sales and service network of more than 650 dealers and agents, we aim to deliver

the best customer support in the industry.

Through setting the standards by which others are judged, JCB has become one of the world’s

most impressive success stories.

JCB Sales Limited, Rocester, Staffordshire ST14 5JP. Tel: 01889 590312. Fax: 01889 590588. Web: http://www.jcb.comJCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/5418 09/11 Issue 5


Documents

WHEELEDLOADINGSHOVEL |426/426eHT/ZX · WHEELEDLOADINGSHOVEL|426/426eZX mm(ft-in) A Overalllengthwithstandardbucket 6 831(22-5) B Axletopivotpin1 096(3-7) C WheelBase 3000(9-8) D Axletotowhitch