Upload
trinhkhanh
View
216
Download
0
Embed Size (px)
Citation preview
GAUGES CATALOGUEAAVVAAIILLAABBLLEE NNOOWW!!
Speco Thomas Pty Ltd1B Levanswell Road, Moorabbin Vic 3189, Australia
Tel: (613) 9555 7244 Fax: (613) 9553 2841Email: [email protected] Web: www.speco.com.au
Final 2005 speco cat.qxd 10/15/07 3:32 PM Page 2
WHEEL NUTS CATALOGUEAAVVAAIILLAABBLLEE NNOOWW!!
Number One for Dress-up Accessories -• Chrome Accessories • Air Cleaners and Valve Covers• Carburettor Adaptors and Linkages• And numerous other products
• Aerosol Paints and Chemicals• Engine Enamels • Quick Coat Enamels• Caliper and Brake Drum Paints• Sandable Primers • Vinyl and Carpet Dyes• Flameproof Coatings • and lots more
Number One Radiator Stop LeakEstablished Since 19283-Way Protection• Stop Leaks • Inhibits Rust • Lubricates
• Transmission Oil Coolers• Oil Cooler Relocation Kits and Adaptors• Diecast Aluminium Valve Covers
Number One for Gauges -• Tacho• Boost• Water Temperature• Oil Pressure• And many more gauges and accessories
Silicone X-Treme tape• The essential protective and repair wrap• No adhesive, self fusing, good from -60ºF to +500ºF• Permanent air and water tight seal• Insulates to 8000 volts
AAccelerator Cables 42Accelerator Cable Stops 23Accelerator Springs 22Adaptors Carburettor 20Adaptors Gauges 36Adaptors-Water & Oil Temp, Oil Press 38Air Cleaners 24-25Air Cleaner Filters 24-25Air Cleaner Fittings 26Air Filter Cleaner 25Air Filter Oils 25Air Horns 52Alternator Pulleys 41Anodised Hose Ends 9
BBraided Hose - Stainless Steel 8Ball Joints 23Ball Joint Balls 23Ball Joint Ends 23Ball Joint Rods 23Bezels 37Blanking Plugs 50Bonnet Hooks 18Bonnet Release Cable 42Boots 6Breather Caps 11-12
CCables 42Cable Brackets 22Cable Clamps 23Cable Stops 23Car Covers 56Carburettor Adaptors 20Carburettor Arms 23Carburettor Base Gasket 51Carburettor Linkage Parts 23 Carburettor Return Spring Bracket 22Choke Cable 42Coil Cover 10Cushion Clamps 9
DDegree Wheels 42Dipsticks & Handles 10Disc Brake Spacers 55Distributor Hold Down 10Door Lock Knobs 16
EElectric Car Horn 52Engine Pulleys Aluminium 41
FFan - Lightweight Plastic & Stainless Steel 47Fan Spacers 17Fuzzy Dice 53Fuel Blocks 22Fuel Fittings 22Fuel Filters & Parts 21Fuel Lines Holley 21Fuel Pressure Regulator 37
GGauges - Speco Precision Instruments 27-35Gauges - Speco Precision Accessories 36-38Gauges - 2 5/8" Performance Series 32-33Gauges - 2 5/8" Pro Series 34-35Gauges - 1 1/2" Sport Series 30Gauges - 2" Sport Series 31Gauges - 2" Street Series 27Gauges - Adaptors 36Gauges - Electric Oil Pressure T Piece-Brass 38Gauges - Fitting Kits 36-37Gauge Mount Pods 36Gauge Mounting Panels 38Gauges - Senders 37Gaskets Carburettor 51Gaskets Holley 51Gaskets Rocker Cover - Rubber/Steel 51Gear Shift Boots 6Gear Shift Knobs 7Guide Plates 42
HHeader Bolt Kits 19Hold Downs Rocker Cover 13Hood Pin Clips 18Hood Pin Kits 18Holley Fuel Line Kits 21Hose Merchandisers 48Hose Bends 49Hose Ends -Anodised 9
IIntake Manifold Bolts 19Ignition Lead Holders - Separators 14Instruments 27-35
INDEX
J
KKlaxon Horn 52
LLight Bulbs-Gauges 37Linkage Parts 23Lowering Kits 19Lock Nut Sets 54-55
MManifold Bolts 19Motorcycle Tachometer 28
OOil Breather Caps 11-12Oil Coolers 43-46Oil Cooler Stacked Plate Design 46Oil Filler Caps 11-12Oil Filter Adaptors 45Oil Filter Relocation Kit 44Oil Filter Relocation Kit - Application Chart 44
PPower Steering Cooler Kit 43Pulleys Engine 41Push Rod Guide Plates 42
RRadiator Cap Cover 10Radiator Hose Water Temp Adaptors 38Radiator Stop Leak 53Registration Label Holder 52Remote Oil Adaptors 44-45Return Spring Bracket 22Rocker Covers 39Rubber Bushes 50Rubber Hose 48Rubber O Ring Kit 50Rubber Valve Cover Gaskets 51
SSide Plates 39Silicone Tape 53Silver Seal 53Stud & Nut Kits 24Stainless Steel Braided Hose 8Speedometers 28
TTachometers 28-29-30-31-32-34Tachometer Shift Light 30Tappet Covers 39Throttle Rods 23Throttle Rod Stops 23Throttle Springs 22Timing Case Covers 40Timing Tabs 17T Pieces & Elbows 22Transmission Oil Coolers 43Transmission Cooler Mounting Kit 45Tyre Pressure Gauges-Digital 37
UU Bolts 19Uni-Balls 23
VValve Covers 39Valve Cover Baffle 12Valve Cover Gaskets (Rubber) 51Valve Cover Grommets 12Valve Cover Hold Downs (Tabs) 13Valve Cover Tabs 13Valve Cover Wing Bolts 13Velocity Stack 24VHT Product Listing 57-58
WWater Necks 15Water Pump Pulleys & Screws 41Weber Air Cleaner 24W Clips 22Wheel Nuts and Lock Nuts 54-55Wheel Spacers 55Wing Bolts 13Wire Loom dividers 14Wire Separators 14
XX-Treme Tape 53
INDEX
6
GEAR SHIFT - Boots
UNIVERSALCovers up to hole size 3 1/2" x 4 1/2"
621509
NISSANCovers up to hole size 3" x 5 1/2"
621511
4-SPEED TWIN-LEVERCovers up to hole size 3 1/2" x 4 1/2"
621513
CENTRESHIFTCovers up to hole size 3 1/2" x 4"
621514
EUROCovers up to hole size 3 1/2" x 5 1/4"
621515
MEGA BOOTCovers up to hole size 8" x 9"
621516
7
GEAR - Knobs
VINYL COVERED SHIFT KNOBFor floor or column shift. Provide sure, comfortable grip.
111445 Black
G-KNOB T-SHIFT HANDLEHigh lustre chrome on solid metal.Made for comfortable grip & positive shifting. For threaded floor shift levers. Including set screw fastener.
111454
WOODY SHIFT KNOBSBeautifully finished natural grained wood finish. 1/2" hole to 3/8" and 5/16"
111455 Plain
EURO STYLE KNOB
111486
CHROME SKULLGEAR KNOB
111467
GEAR KNOB 8 BALLComplete with set screw and bushings to reduce 1/2" hole to 3/8" and 5/16".
111464 Universal fit.
CHROME SHIFT KNOBBrilliant chrome, solid metal. Dramaticaccent for any interior.
111465
PISTON GEARKNOB
111466
8
STAINLESS STEEL - Braided Hose
STAINLESS STEEL BRAIDED HOSEHOSE SIZE NOMINAL I.D. PART NO. USUAL APPLICATION
4 1/4" 404.1 Fuel lines and pressure/vacuum gauges
6 5/16" 406.1 Fuel lines
8 3/8" 408.1 Fuel lines
10 1/2" 4010.1 Heater hose
12 5/8" 4012.1 Heater hoseNOTE: SOLD PER FOOT OR PRECUT TO 10FT OR 20FT
AIRCRAFT QUALITY STAINLESS STEEL HOSE(CUT TO ORDER - NO RETURNS)
HOSE SIZE NOMINAL I.D. PART NO. USUAL APPLICATION
4 1/4" 400040 Fuel lines and pressure/vacuum gauges
6 5/16" 400060 Fuel lines
8 3/8" 400080 Fuel lines racing
10 1/2" 400100 Heater hose and oil coolers
12 5/8" 400120 Heater hose and oil coolers
16 3/4" 400160 Oil lines - dry sumps etcNOTE: CUT TO ORDER - NO RETURNS
TEFLON LINED BRAIDED HOSEHOSE SIZE I.D. PART NO. USUAL APPLICATION
3 1/8" 600003 Brake hoses
4 5/32" 600004 Clutch hoses
NOTE: SOLD PER FOOT - CUT TO ORDER - NO RETURNS
STAINLESS STEEL RADIATOR OVER BRAIDPART No. LENGTH
41200.1 Order required length - per foot
41200.18 18" Precut
41200.24 24" Precut
9
ANODISED - Hose Ends & Cushion Clamps
CUSHIONED TUBINGCLAMPSThese clamps are the best way to supportand locate hoses. They are attached tothe supporting structure either with amachine screw and nut or, in blindapplications, with a machine screw and a rivnut or plate nut.
HOSE ENDSAnodised, blue, red or brilliant chrome.Packed 2 per card.
Hose NominalSize I.D. Part No. Colour
4 1/4" 4304B Blue
4 1/4" 4304C Chrome
4 1/4" 4304R Red
6 5/16" 4306B Blue
6 5/16" 4306C Chrome
6 5/16" 4306R Red
8 3/8" 4308B Blue
8 3/8" 4308C Chrome
8 3/8" 4308R Red
10 1/2" 4310B Blue
10 1/2" 4310C Chrome
10 1/2" 4310R Red
12 5/8" 4312B Blue
12 5/8" 4312C Chrome
12 5/8" 4312R Red
PART No. SIZE
43450-10 5/8" Dia Cushion Clamps (4)
43450-10.10 5/8" Cushion Clamps (10)
43450-12 3/4" Dia Cushion Clamps (2)
43450-12.10 3/4" Cushion Clamps (10)
43450-14 7/8" Dia Cushion Clamps (2)
43450-14.10 7/8" Cushion Clamps (10)
43450-3 3/16" Cushion Clamps (4)Suits Steel Brake Lines.
43450-3.10 3/16" Cushion Clamps (10)
43450-4 1/4" Cushion Clamps (4)#3 Teflon Brake Hose.
43450-4.10 1/4"Cushion Clamps (10)
43450-5 5/16" Cushion Clamps (4)
43450-5.10 5/16" Cushion Clamps (10)
43450-6 3/8" Cushion Clamps (4)
43450-6.10 3/8" Cushion Clamps (10)
43450-8 1/2" Cushion Clamps (4)
43450-8.10 1/2" Cushion Clamps (10)
DISTRIBUTORHOLD-DOWN CLAMPThis clamp features rolled edges for extra strength and is ideal for use on magnetos, as well as standard and electronic ignition distributors. Clamp is complete with boltor stud mount. *Chrome steel - not zincdie-cast.
101860 CHEV. S.B. & B.B.
DIP STICK HANDLESAvailable in two styles Daggeror Hooker. Functional, easy-to-grabchrome plated handles. Easily attached to crankcase and transmission dip sticks,adds a touch of intrigue to any engine.
101229 Hooker
101230 Dagger
10
CHROME - Accessories
CHROME DIP-STICK KITSNo cutting or fabrication necessary. Kits come complete with a new stickand tube. Triple chrome plating adds that finishing touch to any engine.
101231 S.B. Chev
101226 Turbo 350 Auto Transmission
101233 Ford 351C
101234 289-302 Ford Windsor
S.B. Chrysler
101240 Holden 6 - Red Motor
RADIATOR CAP COVERTriple Chrome Plated Die Cast Aluminium. Finned top which enhances any engine.
101848
CUSTOM COIL COVERFits over any standard size coil. Simple installation. Triple plated chrome makes it eye appealing.Universal Coil Cover and Bracket
101850
11
OIL - Caps
CHROME OILBREATHER CAPReplace your factory cap in a snap! Nothing mars the chromed beauty of these fine quality smooth dome units.
101938 HOLDEN 149-202/253-308
VALVE COVER BREATHER PUSH-INSTYLE PCVThis push-in style, PCV oil filler cap is chrome-plated for lasting beauty and fits most valve covers with 1.25" diam. holes.
101941
PUSH-IN BREATHERCAPHigh Performance styling plus up to 25% more breathing capacity. Available in Chrome finish. Gives that professional look.
101939 Chrome Cap
OIL FILLER CAPPLUG TYPENew improved ... This plug features a chrome plated top. Fits most OEM or aftermarket valvecovers with 1.25" hole.
101942 Chrome Top
101943 All Rubber
CHROME OIL CAPCreated with the custom enthusiast in mind. All caps beautifully chromed with a lasting finish.
101936 Suit Chev 55-69, Ford 49-69.
CHROME OIL BREATHER CAPCreated with the custom enthusiast in mind. All caps beautifully chromedwith a lasting finish. All new foam filter. Applications: Chev & Ford with twiston caps.
101937
12
OIL - Caps & Grommets
OIL FILLER CAP TWIST-ONThrow away that old twist-on oil filler cap and replace it with our chrome plated cap. It fits most of the popular stock valvecovers.
101934
UNIVERSALVALVE COVER BAFFLEThe perfect retrofit item for all those non baffled valve covers. Easy to install baffle fits most stamped valve covers with 1.25" dia. holes and replaces the standard breather grommet. Angled holes inbottom allows vapour to pass throughbut stops oil penetration.
101945
OIL CAP COVERTo suit Commodore VS 1995 on.
101921
PUSH ON & TWIST ONHIGH PERF.BREATHERS
Washable filter and chrome top 1" Neck with built-in grommet.
101920 Nascar - 1 3/8” fit
101922 Push On
101924 Holden Twist On
VALVE COVERGROMMETSMoulded from neoprene to ensure positive oil seal. Made to fit most stamped or die cast valve covers. Special bulkpack (20) available
101948 Oil Cap Grommet,1.25" O.D.
101951 One Pair Grommets
101950 PCV Grommet1.25" O.D. x .75" I.D.
13
VALVE COVERS - Accessories
VALVE COVERHOLD DOWN TABSValve cover hold down tabs are designed to spread the fastener's load over a larger area of the valve cover flange to eliminate flame distortion and oil leaks. Ideal forlightweight valve covers. Beautifulchrome finish.
101960 Set 4 S.B. Chev Chrome
101958 Set 4 S.B. Chev Gold
101961 Set 8 Holden 6 & V8Chrome
VALVE COVER WINGBOLTS FIXED TOPChrome-plated for beauty and durability, wing bolts make valve cover removal fast and easy.They are precision engineered and feature extra long threads to allowfor the additional thickness of customvalve covers.
102004 Set 4
TALL T-BAR5 3/8" x 1/4-20 Chrome
102010 Set 4
VALVE COVER WING BOLTS FLIP TOPChrome plated steel with removable tops. Allows for easy lining up of wing bolts.A must for any engine.
102008 Set 4
MINI TABHOLD DOWNSDesigned for use in corner-nut and tight clearance locations to ensure better sealing.
101959 Set 8 Chrome
14
IGNITION - Lead Holders
WIRE SEPARATORSA simple way of keeping ignition wires in their place. Chrome Steel and offered in a complete set of four 2-hole, two 3-hole and two 4-hole dividers.
102041 7mm
WIRE SEPARATORSTough durable plastic prevents cross-firing and accepts 7, 8 or 9mm wires.Each set includes (2) 4-hole, (2) 3-hole, and (2) 2-hole separators.
102042 Yellow
102043 Blue
PRO STYLE WIRE SEPARATORS
102044 Chrome
102045 Black
WIRE LOOM DIVIDERSHI STYLEThe sanitary way to route ignition wires to the spark plugs. Gleaming chrome plated steel looms complete with special locking rubber grommets. Kit includestwo looms attractively skin packaged.
102035 2 ea 4 Hole V8's
102037 2 ea 2 Hole 4 Cyl.
102036 1 ea 2 Hole, 4 Hole, 6 Cyl.
WIRE LOOMMOUNT SETThese looms work extremely well on SB Chev and many other applications. Each kit includes (8) 2-hole looms, (2) 4-hole separators, and 4 special L-shaped brackets.
102032 Yellow
102033 Blue
WIRE LOOM DIVIDERSLOW STYLE
102038 V8 – Pair
15
WATER - Necks
CHROME WATER NECKFOR HOLDEN 6 CYLTriple chrome plated. Replaces original equipment.Comes complete with plated bolts and O-Ring.
102067
O-RING STYLECHROME WATERNECKSBeautifully chrome plated water necksfeature extra thick bases to minimizewarpage and O-Ring style seal toeliminate water leaks. Water necksare complete with O-Ring and bolts.
102074 Ford 289-351 W B
102075 Ford 351 C A
A
B
16
DOOR LOCK - Knobs
BLACK CHROMEDOOR LOCK KNOBSIn keeping with the European styling used in many of the late model cars. Door Lock Knobs are a welcome aftermarket accessory. The metal black chrome knob reduces the possibility ofillegal entry.
111440 Suits most Fords, Set 4
WOODYCHROME & WALNUTDOOR LOCK KNOBSBrilliant chrome combined with walnut makes door lock knobs ideal for interiors featuring wood motif.
111436 Suits most Holden& Japanese, Set 4
111443 Suits most Fords, Set 4
CHROMEDOOR LOCK KNOBSThese attractive units are very nicely chromed and make a clean addition to any interior.
111437 Suit most Fords, Set 4
111438 Suit most Holdens, Set 4
HEADLESSDOOR LOCK KNOBSSmooth design reduces possibility of illegal entry. Die cast from metal witha brilliant chrome finish. Stippled recess makes finger grip easy.
111439 Suits most Holden& Japanese, Set 4
111444 Suits most Fords, Set 4
WALNUTDOOR LOCK KNOBSBeautifully finished genuinewalnut knobs with chromium shafts. The custom touch for matching walnut interioritems.
111442 Suits most Fords, Set 4
CHROME SKULL DOORLOCK KNOBSVery popular and much sort after with threads to suit most Holdens and Fords.
111434 with Red Eyes, Set 4
111435 with Green Eyes, Set 4
17
CHROME - Accessories
TIMING TABSNow available separately are engine timing tabs. Easy to read degree markings. Small block and big block Chevy applications.
102014 Chev S.B. 7" Adjustable
102015 Chev S.B. 8" Adjustable
102016 Chev B.B. 8" Adjustable
ALUMINIUM FANSPACER KITSDesigned for use with flex fans, spacers allow adjustment of fan-to-radiator clearance. Each kit includes spacer, washers and bolts.
501706 1"
501707 2"
GAUGES CATALOGUEAAVVAAIILLAABBLLEE NNOOWW!!
Speco Thomas Pty Ltd
1B Levanswell Road, Moorabbin Vic 3189, Australia
Tel: (613) 9555 7244 Fax: (613) 9553 2841
Email: [email protected] Web: www.speco.com.au
18
BONNET - Accessories
BONNET HOOKSThese rubber bonnet hooks are of sturdy construction and come complete with all hardware.
121528 Pair
HOOD PIN KITS SNAPRING HOOD LATCH KITGives your car the race-bred look whileproviding hood locking. Prevents your hood or deck lid from loosening at high speeds. Brilliant chrome 1/2" studs and pins are accented against polished stainless steel scuffplates. Completewith Mach, 1/8" x 24" long aircraft cable,lanyards non-scratch vinyl coated.
121535
HAIRPIN CLIP HOODPIN KITGive your car the all out competition look. Brilliant chrome 1/2" studs and pins are accented against polishedstainless steel scuffplate.
121529
HAIRPIN CLIPHOOD PIN KIT Give your car the all out competitionlook with this quick opening, positivelocking hood pin. Brilliant chrome 1/2" studs and pins are accented against polished stainless steel scuffplate. Includes nonscratch, flexiblevinyl coated lanyard.
121540
HOOD LOCKSAny high performance car owner's bestinvestment. Positively preventtheft/vandalismof expensive engine parts andaccessories. Attractively packaged inpairs including stainless steel plates,stainless steel locks, plated catch studs,jam nuts and sheet metal screws.Completely adjustable to hood and deckheights and contours.
121530 Fits most cars
REPLACEMENT CLIPSThe same fine quality clip lock pins as used in our top line hood pins.
121533 Pair Hair Pin
121536 Pair Snap Ring
19
LOWERING - Blocks & Bolt Sets
LOWERING KITSThese diecast lowering blocks comewith U Bolts and are tailored to fit.
131510 U Bolt suit Ford 9" diff
131530 Washer faced crush nut
131550 U Bolt suit Lowering Kit80mm inside width
131551 U Bolts and Nuts Kit - 1 Pair80mm inside width
131552 HD-WB1 1/2" Lowering Kit
131553 HD-WB 2" Lowering Kit
131562 XR-XF 6 Cyl1 1/2" Lowering Kit
131563 XR-XF 6 Cyl 2" Lowering Kit
131564 XR-XF V8 1 1/2" Lowering Kit
131565 XR-XF V8 2" Lowering Kit
131569 Falcon EA-EB1 1/2" Lowering Kit
131570 Falcon EA-EB 2" Lowering Kit
131571 Datsun 180-200B1 1/2" Lowering Kit
131572 Datsun 180-200B2" Lowering Kit
131580 Valiant 1 1/2" Lowering Kit
131581 Valiant 2" Lowering Kit
131586 Corona 79-821 1/2" Lowering Kit
HEADER BOLTS HEX HEADHeader bolts are designed for quick, easy installation of headers and heat treated forextra strength. The special washer faced, smaller-than-standard hex head is ideal fortight quarters.
101527 3/8" x 3/4" (12)
101527-100 (100)
101529 3/8" x 1" (12)
101529-100 (100)
101526 5/16" X 1" (8)
101525 3/8" X 1" (12)
A
B
A
B
20
CARBURETTOR - Adaptors
CARBY ADAPTOR Universal 4 barrel. Spreadbore/Squarebore and reverse.Not Thermaquad.
201500
HOLLEY 4BL(SQUAREBORE)To Falcon XC-V8 (Thermaquad-Spreadbore) With EGR Provision
201183
1 INCH UNIVERSALHI-RISE ADAPTORThese aluminium spacers designed to lift HOLLEY quad carb up 1" to allow sufficient clearance for the RIO accelerator pump.Also eliminates linkage hang-ups.Complete with long studs.
201957
2 INCH UNIVERSALHi-RISE ADAPTORThis 2" Hi Rise spacer is drilled to accept Holley and AFB type four barrel carburettors to same base manifolds. Complete with all studs, nuts and washers.
201961
201063 350/500 CFM HolleyTo Falcon 250 Pre - X/Flow
201064 350/500 CFM HolleyTo Holden 179/186
201066 350/500 CFM HolleyTo HQ (202) on.
201174 Holley Squarebore 4BLTo Holley 2BL
STUD AND NUT KITS
221159 1 1/4” x 5/16” (4)
221156 2” x 5/16” (4)
221157 2 1/2” x 5/16” (4)
221158 3 1/4” x 5/16” (4)
21
FUEL - Filters & Line
Part No. Carburettor Distance between Hose & Fitting Pipe ThreadBowl Fittings Dash Size
27520 600, 650 & 750 CFM Holley 8 21/32” 6 5/8” UNF
27521 800 & 850 CFM Holley 9 5/16” 6 5/8” UNF
HOLLEY CHROME FUEL LINEWITH PROVISION FOR FUEL PRESSURE GAUGE
BRONZE ELEMENTCHROME FUEL FILTER3/8” Inlet/Outlet,2 piece screw-on body. Note: Do not use with fuel injection.
28B380
28B380E Replacement element
REUSABLE IN-LINECLEAR/CHROME FUEL FILTERSThese units offer the user complete protection andare reusable.
28C380 3/8” Inlet/Outlet
28C516 5/16” Inlet/Outlet
28C140 M 1/4” Mini
28C516 M 5/16” Mini
22
FUEL - Fittings
Part No. Description Thread Size Hose Size I.D.
46413-5 90o Angle 1/2” UNF 5/16”
46413-6 90o Angle 5/8” UNF 3/8 “
46411-5 Straight 1/2” UNF 5/16”
46411-6 Straight 5/8” UNF 3/8”
Part No. Thread Size Hose Size I.D.
441258 1/4” - 18 NPT 3/8”
441224 3/8” - 18 NPT 5/8”
441265 1/4” - 18 NPT 8441230 3/8” - 18 NPT 6
Part No. Hose Size I.D.
441317 Plastic 5/16”
441313 Plastic T Piece 1/4”
TEE PIECES & ELBOWS
CARB RETURNSPRING BRACKETThe plating on thisbracket isoutstanding.An inexpensive accessory for many performance V8’s this little gem issure to show you increased sales.
221165
W CLIPS221139 Card 1
221140 Card 2
THROTTLE SPRINGS221163 SU Spring - Swivel Ends
221161 Short
221162 Long
221166-20 (Long) Pack of 20
221163-20 (SU) Pack of 20
CHROME PLATEDFUEL BLOCKSThese fuel blocks are precision die-cast and chrome plated. Used for setting up multiple carbs or dual inlet Holleys.Easy to install. Inlet 3/8” N.P.T. - 18 T.P.I.Outlets 1/4” N.P.T. - 18 T.P.I.
27547 Fuel Block
CARBURETTOR - Fittings
23
CARBURETTOR - Fittings
BALL JOINT ASSEMBLY
Ball Joint Assemblies are available inlengths from 2” to 12”. Whenordering use Part No. followed bylength required i.e. 221093.3 etc
221093
ACCELERATORCABLE CLAMP
221145 3/16” Swivel
BALL JOINT ROD
Available in lengths from 2” to 12”
221094
ACCELERATORCABLE STOP
221146 3/16” Swivel
BALL JOINT
221097 Ball Joint End(Left Hand Thread)
221098 Ball Joint End(Right Hand Thread)
ACCELERATORCABLE STOP (HOLDER)
221144 1/4” Thread
UNIBALLS
221099
THROTTLE ROD STOP
221174 For 5/16” Rod. Card 2
BALL JOINT BALL
221108 1/4”221106 5/16”
THROTTLE RODS
221150 21“ x 5/16”
CARBURETTOR ARM
221102 Takes 5/16” Rod
24
AIR CLEANERS
WEBER AIR CLEANERS
351641 Weber DFV/DFM D/D
351642 Weber DGV/DGAV D/D
351643 Weber ADM/ADF D/D
351645 Weber 45 DCOE S/D
391094 Weber Mounting Clips (4)
381855 170mm x 110mm x 50mmrectangular replacement filter
VELOCITY STACKThe heavy duty Velocity Stackis designed with perforatedscreen filter. Measures 5” high.Great for racing and marine use.
Part No. Neck
361847 5 1/8“
WHEEL NUTS CATALOGUEAAVVAAIILLAABBLLEE NNOOWW!!
Speco Thomas Pty Ltd
1B Levanswell Road, Moorabbin Vic 3189, Australia
Tel: (613) 9555 7244 Fax: (613) 9553 2841
Email: [email protected] Web: www.speco.com.au
25
SPECO AIR CLEANERS6 3/8” Diameter 2” High
Part No. Neck Size
A6256 2 5/16” Single Barrel Stromberg
A6258 2 5/8” Double Barrel Stromberg
A6518 5 1/8” Holley
9” Diameter 2” High
Part No. Neck Size
A9256 2 5/16” Single Barrel Stromberg
A9258 2 5/8” Double Barrel Stromberg
A9518 5 1/8” Holley
Part No. Diameter Element Height
A1402 14” Holley Flat Base 2”
A1403 14” Holley Recessed Base 3”
A1404 14” Holley Recessed Base 4”
SPECO (White Paper) FILTERS
Part No. Diameter Height
AE602 6 3/8” 2”
AE902 9” 2”
AE1402 14” 2”
AE1403 14” 3”
AE1404 14” 4”
Part No. Filter Elements Accessories
SP930 VHT Air Filter Cleaner - 15 fluid oz - Made in USA
SP931 VHT Foam Air Filter Oil - 10 fluid oz - Made in USA
SP932 VHT Gauze Air Filter Oil - 18 fluid oz - Made in USA
AIR CLEANERS AND FILTER ELEMENTS
26
AIR CLEANER - Fittings
PCV AIR CLEANERSMOG FITTINGAdapts a factory PCV system to your custom air cleaner
391004 Angle 90˚ Visual Pack
391005 Straight Visual Pack
AIR CLEANERFITTINGSEL TORO WING NUTSThe custom tri-blade, double threadedwing nut that everybody wants ... asstrong as it is beautiful.
391030 El Toro Large
391031 El Toro Small
WING STYLEAIR CLEANER NUTFor quick and easy Air Cleaner removal. Chrome plated.
391026 1/4” Thread
391027 5/16” Thread
3 SPOKE AIRCLEANERWING NUT
391040 Chrome
391042 Gold
AIR CLEANERSTUD & WING NUTChrome Plated
391018 1/4” x 5” Stud
391020 1/4” x 2 3/4” Stud
391090 1/4” x 4 1/2” Stud
391028 1/4” x 2 3/4” Stud & Nut kit
391091 1/4” x 4 1/2” Stud & Nut kit
27
ALL GAUGES INCLUDE: Black Dial, White Scale,
Red Pointer, Fully Illuminated, Complete fitting kits
and senders.
PRECISION - Instruments - 2”STREET SERIES
CLOCKPart No. 523-022” Digital Clock12 Volt, Back-litClear, Blue, Green or RedBlack Dial/Black Bezel
FUEL LEVELPart No. 523-062”12 Volt Fuel Level Gauge Supplied with AdjustableFloat and SenderBlack Dial/Black Bezel
OIL TEMPPart No. 533-152”Mechanical Gauge270o Scale 50o to 150oC
OIL PRESSUREPart No. 533-162”Mechanical Gauge0-100 PSI 270o Scale
AMMETERPart No. 523-512”90o Scale60-0-60 AmpsBlack Dial/Black Bezel
BOOSTPart No. 533-052”Mechanical Gauge30 PSI Boost/No VacBlack Dial/Black Bezel
WATER TEMPPart No. 533-232”Mechanical Gauge270o Scale
Part No. 533-23AComplete with AdaptorsPart No. 533-242”Mechanical Gauge270o Scale, 12’ CapillaryPart No. 533-24AComplete with Adaptors12’ Capillary
HOUR METERPart No. 523-012”Hour Meter (12/24 volts)Black Dial/Black Bezel
CLOCKPart No. 523-032” Electrical Clock12 Volt, Back-litBlack Dial/Black Bezel
OIL TEMPPart No. 523-152”12 Volt Electrical Gauge90o Scale 50o to 150oC
OIL PRESSUREPart No. 523-162”12 Volt Electrical Gauge0-100 PSI 90o Scale
VOLTMETERPart No. 523-222”12 Volt Gauge90o Scale8-16 VoltsBlack Dial/Black Bezel
TURBO BOOST/VACPart No. 533-032”Mechanical Gauge30” Hg Vac/30 PSI BoostBlack Dial/Black Bezel
WATER TEMPPart No. 523-232”12 Volt GaugeElectrical 90o Scale
28
85MM SPEEDOMETERPart No. 520-00 A
Part No. 521-00 BSilver BezelElectronic - Programmable - Two TripMeters,6 Digit Digital Odometer - Data Memory5 years after power offInput Signal - compatible with halleffect sensor, magnetic pick-up and ecu
85MM TACHOMETERPart No. 520-14 APart No. 520-13 BSilver Bezel, In - Dash TachometerElectronic - suits 4 - 6 - 8 cylinder petrolengines. Suits single coil, multi coil andpoints ignition vehicles
MOTORCYCLE TACHOMETERPart No. 520-10Suits 2 cylinder and 4 cylinder0-12000 R.P.M.
White Dial
Black Dial
White Dial
Black Dial
PRECISION - Instruments
A
B
B
A
29
PRECISION - Instruments
SHIFT-LITE TACHOMETERPart No. 520-15 White Dial3 3/4” on/under Dash Mount0-8000 R.P.M. 4-6-8 CylinderTouch-Set Calibration
TACHOMETERPart No. 520-16 White Dial3 3/4” on/under Dash Mount0-8000 R.P.M. 4-6-8 Cylinder
SHIFT-LITETACHOMETER
Part No. 523-18 523-17 (Chrome)3 3/4” on/under Dash Mount0-8000 R.P.M.4-6-8 Cylinder
TACHOMETERPart No. 523-193 3/4” on/under Dash Mount0-8000 R.P.M. 4-6-8 Cylinder
4”SHIFT-LITE TACHOMETERPart No. 520-18 White Dial0-8000 R.P.M. 12 Volt4-6-8 CylinderInternal &External Shift Light
2“ TACHOMETERPart No. 523-2012 Volt 4, 6, & 8 Cyl0-8000 R.P.M. Tacho270
oScale
30
PRECISION - Instruments
5”SHIFT-LITE TACHOMETERPart No. 520-20 White Dial0-11000 R.P.M. 12 Volt4-6-8 CylinderExternalShift Light
5”SHIFT-LITE TACHOMETERPart No. 520-25 White Dial0-8000 R.P.M. 12 Volt4-6-8 CylinderExternalShift Light
5” 4 IN 1SHIFT-LITE TACHOMETERPart No. 520-30 Black Dial0-12000 R.P.M. 12 Volt4-6-8 CylinderMemory RecallExternalShift LightBoost, Oil Pressure& Water Temp Gauge
ADJUSTABLE SHIFT LIGHTPart No. 520-50 12 Volt 4-6-8 CylinderAdjustable R.P.M. 3000-12000Silver Housing
FUEL PRESSUREPart No. 512-151 1/2” 0-15 PSI MechanicalFuel Pressure GaugeWhite Dial/Chrome Housing
FUEL PRESSUREPart No. 512-201 1/2” Mechanical Fuel PressureGauge (EFI)For Fuel Injection 0-100 PSIWhite Dial/Black Housing
FUEL PRESSUREPart No. 512-161 1/2” Liquid Filled Gauge0-15 PSI Mechanical FuelPressure CarburettorsWhite Dial/Chrome Housing
FUEL PRESSUREPart No. 512-211 1/2” Liquid Filled Gauge0-100 PSI Mechanical Fuel PressureWhite Dial/Chrome Housing
PRECISION - Instruments - 11/2”SPORTS SERIES
31
PRECISION - Instruments - 2”SPORTS SERIES
2”TURBO VAC/BOOSTPart No. 524-0430” Hg to 30 PSI Boost GaugeSilver Dial/Silver Bezel
2”FUELPart No. 524-06Fuel Gauge and SenderSilver Dial/Silver Bezel
2”OIL TEMPPart No. 524-1550-150˚C Mechanical GaugeSilver Dial/Silver Bezel
2”OIL PRESSUREPart No. 524-20Electrical Gauge100 PSI Includes SenderSilver Dial/Silver Bezel
2”VOLTMETERPart No. 524-228-16 VoltSilver Dial/Silver Bezel
2”WATER TEMPPart No. 524-3040-120˚C Electical GaugeIncudes SenderSilver Dial/Silver Bezel
OXYGEN SENSORPart No. 524-41Single wire oxygen sensor
and weld nut
2”TACHOMETERPart No. 524-010-8000 RPMIn Dash Silver Dial/Silver Bezel
2”BOOSTPart No. 524-0530 PSI Boost Gauge (no vac)Silver Dial/Silver Bezel
2”FUEL PRESSUREPart No. 524-0715 PSI GaugeSilver Dial/Silver Bezel
2”OIL PRESSUREPart No. 524-16100 PSI Mechanical GaugeSilver Dial/Silver Bezel
2”OIL TEMPERATUREPart No. 524-21 ElectricalGauge 50˚-100˚CFitting Kit IncludedSilver Dial/Silver Bezel
2”WATER TEMPPart No. 524-2340-120˚C Mechanical Gauge SilverDial/Silver Bezel
Part No. 524-23AIncludes 4 Adaptors
2”AIR FUEL RATIOPart No. 524-40Suit 1,2,3&4 wire oxygen sensorsNot suitable for 5 wire sensorsSilver Dial/Silver Bezel
2”AMMETERPart No. 524-5160-0-60 ampsSilver Dial/Silver Bezel
32
PRECISION - Instruments - 25/8”PERFORMANCE SERIES
TACHOPart No. 520-010-8000 RPMFitting kitincludedBlack Dial/Silver Bezel
BOOST/VAC GAUGEPart No. 535-03Mech. Vac 30” Hg - Boost 20 PSIFitting kit included
BOOST/VAC GAUGEPart No. 535-04 Mech. Vac 30” Hg - Boost 30 PSIFitting kit includedBlack Dial/Silver Bezel
FUEL LEVELPart No. 535-06 12 Volt Fuel Level Gauge Supplied with adjustable float and senderBlack Dial/Silver Bezel
FUEL PRESSUREPart No. 535-070-15 PSI Fuel Pressure GaugeFitting kit includedBlack Dial/Silver Bezel
VACUUMPart No. 535-100-30” HgFitting kit includedBlack Dial/Silver Bezel
OIL TEMPERATUREPart No. 535-15Mechanical Gauge 40o to 170oCFitting kit includedBlack Dial/Silver Bezel
OIL PRESSUREPart No. 535-166 Foot CapillaryPart No. 535-1712 Foot CapillaryMechanical Gauge 0-100 PSIFitting kit includedBlack Dial/Silver Bezel
33
PRECISION - Instruments - 25/8”PERFORMANCE SERIES
OIL PRESSUREPart No. 535-200-100 PSI Elec. Oil Pressure GaugeFitting kit includedBlack Dial/Silver Bezel
VOLTMETERPart No. 535-2210-18 VoltFitting kit includedBlack Dial/Silver Bezel
WATER TEMPERATUREPart No. 535-2412 Foot CapillaryMechanical Gauge 40o to 140oCBlack Dial/Silver BezelPart No. 535-24AIncludes 4 Adaptors
WATER TEMPERATUREPart No. 535-236 Foot CapillaryMechanical Gauge 40o to 140oCBlack Dial/Silver BezelPart No. 535-23AIncludes 4 Adaptors
WATER TEMPERATUREPart No. 535-30Elec. Water Temp 40o to 120o
Fitting kit includedBlack Dial/Silver Bezel
AMMETERPart No. 535-5160-0-60 AmpFitting kitincludedBlack Dial/SilverBezel
34
PRECISION - Instruments - 25/8”PRO SERIES
TACHOPart No. 520-02 0-8000 RPMFitting kit includedWhite Dial/Silver Bezel
VAC/BOOSTPart No. 537-0330” Hg to 20 PSIVac/Boost Fitting kit includedWhite Dial/Silver Bezel
VAC/BOOSTPart No. 537-0430” Hg to 30 PSIFitting kit includedWhite Dial/Silver Bezel
FUEL GAUGEPart No. 537-0612 Volt ElectricFitting kit includedWhite Dial/SilverBezel
FUEL PRESSUREPart No. 537-070-15 PSI Fitting kit includedWhite Dial/Silver Bezel
VACUUMPart No. 537-100-30” HgFitting kit includedWhite Dial/Silver Bezel
OIL TEMPERATUREPart No. 537-1540-170oC Mech. Fitting kit includedWhite Dial/SilverBezel
TACHOPart No. 520-03 0-8000 RPMFitting kit includedWhite Dial/Silver BezelSpecial for3 Cylinder Motors
35
PRECISION - Instruments - 25/8”PRO SERIES
OIL PRESSUREPart No. 537-16 12 Foot Capillary0-100 PSI Mech.Fitting kit includedWhite Dial/Silver Bezel
OIL PRESSUREPart No. 537-1712 Foot Capillary0-100 PSI Mech.Fitting kit includedWhite Dial/Silver Bezel
OIL PRESSUREPart No. 537-20Electrical Oil Press 0-100 PSIFitting kit includedWhite Dial/Silver Bezel
VOLTMETERPart No. 537-2210-18 Volt Fitting kit includedWhite Dial/Silver Bezel
WATER TEMPERATUREPart No. 537-2412 Foot CapillaryMechanical Gauge 40-140ºCWhite Dial/Silver BezelPart No. 537-24AIncludes 4 Adaptors
WATER TEMPERATUREPart No. 537-236 Foot CapillaryMechanical Gauge 40-140ºCWhite Dial/Silver BezelPart No. 537-23AIncludes 4 Adaptors
WATER TEMPERATUREPart No. 537-30Elec. Water Temp 40o to 120oCFitting kit includedWhite Dial/Silver Bezel
AMMETERPart No. 537-5160-0-60 AMPS Fitting kit includedWhite Dial/Silver Bezel
36
PRECISION - Accessories
MOUNT PODPart No. 534-902 5/8” Black SteelExternal clamp style.
Part No. 534-992 5/8” 540˚ BlackPlasticMountng Kit
Part No. 535-012 5/8” Chrome SteelFitting kit included
Part No. 541-002” Black PlasticExternal clamp style.
MOUNT PODPart No. 534-912 5/8” Chrome SteelExternal clamp style.
Part No. 535-002 5/8” Black SteelFitting kit included.
Part No. 540-002” Chrome SteelExternal clamp style.
Description Part No.Oil Pressure sender (Electric) 545-201/8” NPT x M14-1.5 Adaptor 542-211/8” NPT x M16-1.5 Adaptor 542-221/8” NPT x M18-1.5 Adaptor 542-231/8” NPT x M12-1.5 Adaptor 542-241/8” NPT x 1/4” NPT Adaptor 542-25Temperature Sender (Electric) 545-301/8” NPT x 1/8” BSP Adaptor 543-311/8” NPT x 3/8” NPT Adaptor 543-32 Electrical1/8” NPT x 1/2” NPT Adaptor 543-33 Gauges1/8” NPT x 5/8” UNF Adaptor 543-34Fuel Level Sender (Electric) 545-405/8” UNF x M16-1.5 Adaptor 544-41 Mechanical5/8” UNF x M18-1.5 Adaptor 544-42 Water5/8” UNF X 1/2” NPT Adaptor Temperature
Holden/Chev 544-43 Gauges5/8” UNF X 3/8” NPT Ford & Chrysler V8 544-445/8” UNF X 5/8” UNF fitted with O ring seal 544-45Boost Gauge Fitting Kit (Nylon)-6’ 546-40Oil Press Fitting Kit (Nylon)-6’ 546-50Oil Press Fitting Kit (Nylon)-12’ 546-55Oil Press Fitting Kit (Copper)-6’ 546-60Oil Press Fitting Kit (Copper)-12’ 546-65Nylon Line Kits are 1/8” O.D.
ADAPTORSElecticalGauges
37
PRECISION - Accessories
FUEL PRESSUREREGULATORPart No. 512-00Mech. Fuel Pressure 1-6 PSI. inc 5/16 & 3/8 fittings
BRAIDED LINE KIT
Part No. 546-70 3’ Suits Mechanical Pressure GaugesPart No. 546-71 5’ Suits Mechanical Pressure Gauges
SENDER
Part No. 545-20Electrical Oil Pressure 1/8” NPT
Part No. 545-30Electrical Temperature 1/8” NPT
Part No. 545-40Adjustable Fuel Level for523-06/524-06/535-06/537-06 GaugesTop Mount Only
PRESSURE GAUGEFITTING KIT
Part No. 546-40 6’ Nylon Line Boost GaugePart No. 546-50 6’ Nylon Line Oil Press GaugePart No. 546-5512’ Nylon Line Oil Press Gauge
Part No. 546-606’ Copper Line Oil Press GaugePart No. 546-6512’ Copper Line Oil Press Gauge
BEZEL
Part No. 548-002” Clip OnPart No. 548-012 5/8” Clip On
SPECO METER
Part No. 510-00Digital Tyre Pressure Gaugeinc Tread Depth Function
Part No. 510-20Digital Tyre Gauge Set0-150 PSI Boxed with 4 Adaptors
LIGHT BULB
Part No. 550-01 14 mm Assembly2”Mech & all 2 5/8” GaugesPart No. 550-02 14 mm Assembly2” Electrical GaugesPart No. 550-03Globe Holder for 85mmSpeedos and TachosPart No. 550-0414 mm Assembly 24 volt for 2” Mech and all 2 5/8” Gauges
38
PRECISION - Accessories
RADIATOR HOSE WATERTEMPERATURE ADAPTORSMechanical Water Temperature Gauges
547-03 32mm I.D.547-04 34mm I.D.547-05 36mm I.D.547-06 38mm I.D.547-07 40mm I.D.
Electric Water Temperature Gauges
547-12 32mm I.D.547-13 34mm I.D.547-14 36mm I.D.547-15 38mm I.D.547-16 40mm I.D.
Electric Fan Radiator Hose Adaptor
547-20 36mm I.D.547-21 38mm I.D.
OIL PRESSURE & OILTEMPERATURE ADAPTOROil Filter Mount
547-49 13/16”-16 Oil Filter threadSuits V8 Commodore, VN onwards. 2 3/4” O-Ring
547-50 3/4”-16 Oil Filter threadSuits most Ford, Toyota, Nissan
547-51 18-1.5mm Oil Filter threadSuits V6 Commodore, VN onwards
547-52 20-1.5mm Oil Filter threadSuits most Mazda, Mitsubishi, Honda etc
547-53 22-1.5mm Oil Filter threadSuits Ford V8, BA onwards
GAUGEMOUNTING PANELS
541-01 One Hole 2” Black541-02 Two Hole 2” Black 541-03 Three Hole 2” Black
541-05 One Hole 2 5/8” Black541-06 Two Hole 2 5/8” Black 541-07 Three Hole 2 5/8” Black
541-08 One Hole 2 5/8” Chrome541-09 Two Hole 2 5/8” Chrome541-10 Three Hole 2 5/8” Chrome
ELECTRIC OIL PRESSURET-PIECES BRASS
A B C547-60 1/8”NPTx1/8”NPTx1/8”NPT547-61 1/4”NPTx1/4”NPTx1/8”NPT547-62 1/8”BSPx1/8”BSPx1/8”NPT
A B
C
with 16mm x 1.5 threaded fitting
39
VALVE COVERS - Chrome
HOLDEN 149-202An asset to any engine bay. Heavygauge steel. Triple chrome plated.Don’t forget - wing nuts, hold downs &breather caps for the ultimate finish.Suitable for roller rockers.
551931
HOLDEN 149-202SIDE PLATESGives that pro-finish.Heavy gauge steel. Triple chrome plated.
551950 (Pair)
VALVE COVERSHOLDEN 253-308For that distinctive look. Beautifullychrome plated. Heavy gauge steel.Get rid of that old painted tin cover.Wing nuts and retaining tabs areavailable in that real pro-finish.Suitable for roller rockers.
551902 308 Logo551932 Pre-Pollution
FORD V8Make your engine look a milliondollars. Triple Chrome Plated. Easy toclean. A must for the Ford Enthusiast.NOTE:- Not suitable for Roller Rockers.
551903 351 Logo551911 302-351C
VALVE COVERS - STEELCHEV 283-350High Rise to fit engines using RollerRockers. Standard type designed to clearAir Conditioning brackets and PowerBrake Booster. Triple Chrome Plated.
551908 A - Hi-rise551909 B - Standard
IMPORTANT NOTEALL CHROME VALVE COVERS USE:
101948 Rubber Oil Cap Grommet101950 Rubber PCV
Valve Grommet101951 Oil Cap & PCV Grommet
(1 pair)101939 Chrome push in oil cap
(Breather)101941 Chrome Push in Oil Cap
with PCV Outlet
*Except where twist on caps apply
40
VALVE/TIMING COVERS - Chrome
SMALL BLOCKCHEVROLET CHROMETIMING CHAIN COVERChrome replacement front cover forsmall block Chevrolet.
551800 265-400 Chevrolet551801 Big Block Chevrolet
FORD WINDSOR
551850 302-351 Timing case alloy casting
FORD WINDSOR
551855 Silicone Timing Case Seal Ex Ford USA
41
MACHINED - Aluminium Pulleys
These precision machined aluminium pulleys are the ultimate in design, function andappearance. These units really add impact to the looks of your high performance small blockChevrolet. The upper (water pump) aluminium pulleys require special bolts for installation. UsePart No. 504000.
CAUTION: Because aluminium pulleys must be made thicker than a steel pulley, the centreshaft on the water pump may not protrude through the pulley to properly support a fan. Ifthe centre shaft of the water pump does not reach into the centre hole of the fan, do not use.
1955-68 SMALL BLOCK CHEVROLET V8with short water pump
SINGLE GROOVE DOUBLE GROOVE SINGLE GROOVE DOUBLE GROOVEUPPER UPPER LOWER LOWER5041SP 5042SP 5041SC 5042SC
1969-85 SMALL BLOCK CHEVROLET V8with long water pump
SINGLE GROOVE DOUBLE GROOVE SINGLE GROOVE DOUBLE GROOVE TRIPLE GROOVEUPPER UPPER LOWER LOWER LOWER5041LP 5042LP 5041LC 5042LC 5043LC
S.B. CHEV S.B. CHEV SCREWSUpper pulley nose Upper pulley nose To suit AlloyShort Water Pump Long water pump Water Pump Pulleys
5057SP 5056LP 504000
ALTERNATORPULLEY SETDelco & Bosch17mm Shaft
5055AP
42
ENGINE - Parts
PUSH ROD GUIDEPLATESHelps prevent bent pushrods. These guide plates assistin correcting misalignmentbetween liftersand rocker arms. They also aid in eliminating push rod guide wear andhelp prevent mushroom valve stemtips. *Australian made.* Use hardened push rods.
501808 Holden 253-308 5/16”501809 Holden 253-308 9mm
UNIVERSAL DEGREEWHEEL
The eight inch diameter degree wheelis designed to insure maximum accuracyin camshaft installations.
Part No. 502050
UNIVERSALACCELERATOR CABLESuits Holden & Ford V8. 60” long(Not Commodores)
Part No. 1550BONNET RELEASECABLEUniversal application.T-handle. 100” long. BowdenCable
CAB1011-100
CABLES - Accessories
CHOKE CABLEThese universal Choke Cables come complete with mounting bracket.
CK910 100” LONG
43
TRANSMISSION - Oil Coolers
D13201 12,000 G.V.W. Rating3/4” x 5” x 12” - 4 Cyl Cars
D13202 14,000 G.V.W. Rating3/4” x 5” x 17” - 6 Cyl Cars
D13203 18.000 G.V.W. Rating3/4” x 7” x 17” - V8 Cars
D13204 20,000 G.V.W. Rating3/4” x 10” x 17”Heavy Duty V8 Cars/Trucks
D13206 16,000 G.V.W. Rating3/4” x 7” x 12”6 Cyl Compacts (Commodores)
DERALE THIN LINE COPPER CORE KITS(made in U.S.A.)
Derale manufactures copper core coolers with hand brazed joints. Five of the most popularmodels for today’s automotive market are featured. Derale has an excellent turbulator system which transfers heat to the copper side walls thus dissipating theheat through wrinkle aluminium fins. This is the most effective heat transfer unit available for the average motor today!
Featuring: Complete kit with all mounting hardware and clamps.• Thin line units for easy installation.Attractive consumer packaging.
• Fin Guards help protect from road hazards.
POWER STEERINGCOOLER KITD13200 10” x 3” x 3/4”
44
OIL COOLER - Accessories
REMOTE OIL FILTERRELOCATION KITSAPPLICATION CHARTFORD, CHRYSLERKit No. D15715* - By Pass No. D157031957-up Ford 6 cyl.1957-up Ford V8 221, 255 (4.2L),
260, 289, 292, 302 (5.0L),312, 351 (5.8L), 390, 400, 429, 460
All Chrysler 6 cyl. & V8 with disposable filters
1975-78 Datsun 280-Z 6 cyl.1979-84 Datsun 280-ZX 6 cyl. &
300 ZX excl. Turbo1984-85 Nissan - AllAll Toyota (Spin-on element)3/4”-16 Eng. Thread on all above app.
CHEVROLET, HOLDEN* NOTE - Not Commodore V6
Kit No. D15716* - By Pass No. D15705(Incl. in No. D15716 Kit)
1968-up Chevrolet V8 with factory spin-on filter. *13/16”-16 Engine Thread - Dual O ring - Fits large and small G.M. diameter canisters.
MAZDA, MITSUBISHIKit No. D15718* - By Pass No. D15706(Incl. in No. D15718 Kit)
All thru ‘85 MazdaAll Mitsubishi *20mm x 1.5
Engine thread - dual O ring - Fits large andsmall diameter canisters.
D15724 22-1.5mmFord V8 BA onwards
OIL FILTER RELOCATIONKITSDerale remote oil filter mounting kit relocates spin on oil filters to a more convenient access for service. Kit is complete withall hose and fittings.
Part No. O Ring EngineSize Thread Size
D15715 2-39/64 3/4”-16 Ford
D15716 2-39/64 13/16”-16& 3-7/32 Holden-Chev
(Not Commodore V6)D15717 2-39/64 18-1.5mm
Commodore V6D15718 3-39/64 20-1.5mm
& 3-7/32 Mitsubishi
D15725 22-1.5mmFord V8 BA onwards
REMOTE OIL ADAPTERSENGINE REMOTE ADAPTER
1/2” NPT port fits 13/16”-16 enginethread. Will fit large or small O ringfilters. (Incl. in kit no. D15716)D15705 Chev and Holden.ENGINE REMOTE ADAPTER1/2” NPT port fits 20 x 1.5mm enginethread. (Incl. in kit no. D 15718) will fitlarge & small O ring filters. D15706Mazda, Honda, Mitsubishi.ENGINE REMOTE ADAPTER1/2” NPT ports fits 3/4”-16 engine thread. D15703 Ford. ENGINE REMOTE ADAPTER1/2” NPT ports fits 18 x 1.5mm engine thread. D15704 Commodore V6.
45
OIL COOLER - Accessories
CHEVROLET SPIN ONOIL FILTER ADAPTORConverts fixed canister oil filters to spin-on filter. Made in USA.
Part No. CP40411
TRANSMISSION COOLERMOUNTING KIT 4 - Nylon Rods w/locks 4 - Rubber Pads
Part No. D13001
DUAL REMOTE SPIN ON OIL FILTER MOUNT1/2” NPT Ports R or Lwith 2 plugs. Uses Ford Z9 filters
Part No. D15707 (3/4” – 16)
SINGLE REMOTE OILFILTER MOUNT
Single Remote - 1/2” NPT - uses FordZ9 filters
D15708 Vertical In/Out Ports
D15709 Horizontal In/Out Ports
46
OIL COOLER - Stacked Plate Design
PERFORMANCE OILCOOLERSFor race and roads. Suitable forengines and transmissions. Stacked plate design for maximum cooling.
D12101 13 Row AN10 Fittings. 330x120x55mm
D12102 13 Row AN8 Fittings. 330x120x55mm
D12103 13 Row AN6 Fittings. 330x120x55mm
D12201 19 Row AN10 Fittings. 330x170x55mm
D12301 25 Row AN10 Fittings. 330x220x55mm
OIL COOLERS SANDWICHADAPTOR -THERMOSTATIC
D15720 13/16” Oil Filter thread. 3 1/2” Diameter O-ring 3/8” NPT ports. Suits S.B.Chev and early Holdens
D15730 3/4” Oil Filter thread. 2 3/4” Diameter O-ring 3/8” NPT ports. Suits mostFord, Toyota, Nissan, etc.
D15731 13/16” Oil Filter thread. 2 3/4” Diameter O-ring 3/8” NPT ports. Suits Commodore V8’s.
D15732 20mmx1.5 Oil Filter thread. 2 3/4” Diameter O-ring 3/8” NPT ports. Suits mostMazda, Mitsubishi, Honda, etc.
D15733 18mmx1.5 Oil Filter thread. 2 3/4” Diameter O-ring 3/8” NPT ports. Suits Commodore V6-VN onwards.
D15734 22mmx1.5 Oil Filter thread. 3/8” NPT ports. Suits Ford V8-BA onwards.
LIGHTWEIGHT ENGINECOOLING FAN
D19617 17” Plastic Engine Fan
D19618 18” Plastic Engine Fan
47
ENGINE FANS - Ex U.S.A.
HIGH PERFORMANCEFLEX FANS
Hi Perfomance Flex Fans feature anarrow blade for good airflow intight space applications. Embossedcentre hubs and four-rivet bladeattachment provide increasedstrength.Stainless Steel Fan Blades. Rated up to 7,000 RPM’s.Standard and reverse rotation.Chrome plated or black powdercoated hub.
Heavy Duty Stainless Blade -Black Hub
D17017 17” Blade
D17018 18” Blade
Performance Stainless Blade -Black Hub
D19117 17” Blade
D19118 18” Blade
PRODUCTS INCLUDED:Brake Vacuum Hose 11/32” (9.5mm) ID 1 x 7 mtr.
Transmission Cooler Hose 5/16” (7.9mm) ID 2 x 7 mtr.
Fuel Hose 3/16” (4.8mm). 1/4” (6.3mm), 5/16” (7.9mm),
3/8” (9.5mm) each 7 mtr.
Windshield Washer, 7/64” (2.5mm), 1/8” (3.0mm), 5/32” Vacuum and (4.0mm)
7/32” (5.5mm), 1/4” (6.3mm) each 15 mtr.
Part No. Description
3111048-30 3/16” Rubber Fuel Hose 30m
3111048-7 3/16” Rubber Fuel Hose 7m
3111063-100 1/4” Rubber Fuel Hose 100m
3111063-30 1/4” Rubber Fuel Hose 30m
3111063-7 1/4” Rubber Fuel Hose 7m
3111079-100 5/16” Rubber Fuel Hose 100m
3111079-30 5/16” Rubber Fuel Hose 30m
3111079-7 5/16” Rubber Fuel Hose 7m
3111095-100 3/8” Rubber Fuel Hose 100m
3111095-30 3/8” Rubber Fuel Hose 30m
3111095-7 3/8” Rubber Fuel Hose 7m
3111127-7 1/2” Rubber Fuel Hose 7m
311T079-30 5/16” Trans Cooler Hose 30m
311T079-7 5/16” Trans Cooler Hose 7m
311T095-30 3/8” Trans Cooler Hose 30m
311T095-7 3/8” Trans Cooler Hose 7m
3300025-15 7/64” Vacuum & Washer Hose 15m
3300030-15 1/8” Vacuum & Washer Hose 15m
3300040-15 5/32” Vacuum & Washer Hose 15m
3300045-15 3/16” Vacuum & Washer Hose 15m
3300055-15 7/32” Vacuum & Washer Hose 15m
3300063-15 1/4” Vacuum & Washer Hose 15m
3300079-15 5/16” Radiator O’Flow Hose 15m
3300095-15 3/8” Radiator O’Flow Hose 15m
4205095-30 11/32” Brake Vacuum Hose 30m
4205095-7 11/32” Brake Vacuum Hose 7m
4205120-30 15/32” Brake Vacuum Hose 30m
4205120-7 15/32” Brake Vacuum Hose 7m
4801095-100 3/8” Car Heater Hose 100m
4801095-25 3/8” Car Heater Hose 25m
4801127-100 1/2” Car Heater Hose 100m
4801127-15 1/2” Car Heater Hose 15m
4801160-100 5/8” Car Heater Hose 100m
4801160-15 5/8” Car Heater Hose 15m
4801191-15 3/4” Car Heater Hose 15m
5130079-30 5/16” P/Steer Return Hose 30m
5130079-7 5/16” P/Steer Return Hose 7m
5130100-7 10mm P/Steer Return Hose 7m
5250075-7 5/16” EFI Fuel Hose 7m
5250095-7 3/8” EFI Fuel Hose 7m
AUTOMOTIVE HOSEMERCHANDISERFEATURESFully powder coated steelcabinet, Holds 127 metre spools of product.Contains 4 types of hose -10 assorted sizes. Wallmountable, front loading, attractive design,metric and imperial measuring scale, boldmarking of hose type and size.
Part No. PCH001-G
48
RUBBER - Hose
HEATER HOSEMERCHANDISER
This Merchandiser isdedicated to automotive
heater hose and is a strongly built, powder coated, free standing
cabinet that looks attractive in retail
surrounding. It comes with stock of the three most popular heater
hose sizes and features easy front loading, metric and
imperial measuring scales and bold, easyto read size markings.
Part No. PCH002-GProducts include:
2 coils each of the following heater hose;1/2” (12.7mm) x 15m 5/8” (16.0mm) x 15m3/4” (19.1mm) x 15m
Emission Tubing
49
RUBBER - Hose Bends
Part No. Type IDHHZ6 Water 6HHZ8 Water 8HHZ10 Water 10HHZ12 Water 12HHZ16 Water 16HFEZ6 Fuel vapour/vac. vent 6HFEZ8 Fuel vapour/vac. vent 8HFEZ10 Fuel vapour/vac. vent 10HFEZ12 Fuel vapour/vac. vent 12HFZ6 Fuel (no EFI) 6HFZ8 Fuel (no EFI) 8HFZ10 Fuel (no EFI) 10HFZ12 Fuel (no EFI) 12
UNIVERSAL HOSE BENDSThese 90 degree Universal Hose Bends are available in the most popular sizes.Manufactured to high standards these hose bends are suitable for any array ofautomotive and industrial uses. They are NOT suitable for the conveyance ofpetroleum products.
UNIVERSAL HOSE BENDSThese U Bend hoses are manufactured to high standards andare suitable for an array of automotive and industrial uses.They are intended to convey petroleum products only.
Part No. ID LengthA B
PCHNB13 12.70 290 50PCHNB16 15.90 290 50PCHNB19 19.05 290 50PCHNB22 22.25 290 50PCHNB25 25.40 290 50PCHNB35 34.95 290 50PCHNB37 37.80 290 50PCHNB38 38.10 290 50
Z SHAPED HOSE BENDSOur range of Z shaped hose is one of themost extensive available. These hoses canbe configured intothe various formsdemanded by today’scomplicated andcramped engine bays.They can also be usedin many industrialapplications.Note that these hosesshould only be usedto convey the liquidsspecified.
Part No. ID Length A
PCHUB8 8.00 280PCHUB10 10.00 280
ALL DIMENSIONSIN MILLIMETRES
ALL DIMENSIONSIN MILLIMETRES
RUBBER BLANKING PLUGS
RUBBER - Industrial & Auto
50
Part No. DescriptionRBP-1/2 1/2” IDRBP-3/8 3/8” IDRBP-5/8 5/8” IDRBP-3/4 3/4” ID
RUBBER BUSHESOur range of fast moving suspension bushes meets industry standards for qualityand fitness for purpose.
S4002 (A1169)Shocker Bush
(9.5mm ID 37mm OD)
S4013 (S197)Rear Shackle Bush(13mm ID 24mm OD)
S4026 (A950)Shocker Bush
S4006 (A755)Shocker/Sway Bar Bush(10mm ID 25mm OD)
S4021 (A92)Shocker/Sway Bar Bush(10mm ID 25mm OD)
S4011 (S112)Rear Shackle Bush(13mm ID 24mm OD)
S4025 (A148)Shocker Bush
Model: ORKIT-4INCH SIZE (AS 568 Standard Series)
006, 007, 008, 009, 010, 011, 012, 110, 112, 113,114, 115, 116, 210, 211, 212, 213, 214, 215, 216,217, 218, 219, 220, 221, 222, 325, 326, 327.TOTAL 30 ITEMS (380 PIECES)Packed in a Red PVC Box
Model: ORKIT-5BMETRIC SIZE (JIS Standard Series)
P3, P4, P5, P6, P7, P8, P9, P10A, P11, P12, P14,P16, P18, P20, P22.4, P25, P26, P30, P32, P34,P36, P40, P48, G25, G30, G35, G40, G45, 20x3,22x3.Packed in a Blue PVC Box
RUBBER O RING KITS
51
GASKETS
RUBBER/STEELVALVE COVER GASKETSCompletely reusable, these strong rubbergaskets are impregnated with steel reinforcing to ensure alignment and proper seal.*Do not over tighten.
811372R 253-308 Holden (PR)811373R Holden 6 Cyl821370R 283-350 Chev (PR)831371R 351C Ford (PR)831356R Ford 289-351W (PR)831385R Ford X-Flow831390R Ford EA-ED -
U-Groove Design(no steel insert - fits onto rocker cover)
CARBURETTORBASE GASKETSPPaarrtt NNuummbbeerr FFiittmmeenntt QQttyy
881285-5 - A Ford XC Thermaquad 5
881337-5 - B Holden 308-76 on 5
881334-5 - C Holley 4 BBL 5
881335-5 - D Holden 308 76-on Quadrajet 5
881267-5 Thermaquad 5
881265-5 Holley Open Plenum 5
881333-10 Holley 350-500 10
881279 Varajet 1
52
ACCESSORIES
TRIPLE AIR HORNSPart No. DL1140
12 Volt - Red. Fitting kit included
TWIN AIR HORNSPart No. DL1138
12 Volt - Black. Fitting kit included
ELECTRIC CAR HORNPart No. DL1290H
12 Volt - Double Contact
REGISTRATIONLABEL HOLDERPart No. LH1
Suits Trailers Motorcycles, BoatsQuality - Not the throw away typePlease Note:- Fits current Victorian label.
KLAXON CAR HORNPart No. DL1155
12 Volt - (AH-OOH-GA)
53
ACCESSORIES
FUZZY DICE
368 Black 2 1/2” PAIR368 Red ” ”368 Blue ” ”368 White ” ”368 Pink ” ”
SILICONE TAPE
Silicone X-Treme TapeNo adhesive, self fusingGood from -60ºF to +500ºFPermanent air and water tight sealInsulates to 8000 voltsXT1Beware of Thinner Imitations
54
STEEL LUG NUTSSets of 4 Loose Thread Size
BULGE NUT WN604-10 12mm x 1.50BULGE NUT WN604-50 12mm x 1.50
WN101 WN701-10/50 7/16”WN102 WN702-10/50 1/2”WN103 WN703-10/50 12mm x 1.25 WN104 WN704-10/50 12mm x 1.50
TUNER NUTSSets of 16 + Key Loose Thread Size
WN151 WN751-10/50 7/16”WN152 WN752-10/50 1/2”WN153 WN753-10/50 12mm x 1.25WN154 WN754-10/50 12mm x 1.50
TUNER NUT KEY WNK-TN
MAG LUG NUTSSets of 4 Loose Thread Size
WN201 WN801-10/50 7/16”WN202 WN802-10/50 1/2”WN203 WN803-10/50 12mm x 1.25WN204 WN804-10/50 12mm x 1.50
MAG WHEEL-OPEN END- THREAD ALL THE WAY THROUGH
Loose Thread Size
WN805-5 1/2”WN806-5 7/16”
MAG WHEEL LOCKSSets of 4 Set of 5 Thread Size
WN301 7/16”WN302 1/2”WN303 WN3035 12mm x 1.25WN304 WN3045 12mm x 1.50
STEEL WHEEL- OPEN END LOCK NUTSSets of 4 Thread Size
WN305 7/16”WN306 1/2”WN307 12mm x 1.25WN308 12mm x 1.50
CRAGAR MAG WHEEL LOCKSSets of 4 Thread Size
WN309 12mm x 1.50
FITTING CHART AVAILABLE UPON REQUEST
WHEEL NUTS
55
WHEEL NUTS
CRAGAR LUG NUTSSets of 4 Loose Thread Size
WN901-5 7/16”WN902-5 1/2”WN903-5 12mm x 1.25WN904-5 12mm x 1.50
STEEL WHEEL LOCKSSets of 4 Set of 5 Thread Size
WN401 7/16”WN402 1/2”WN403 WN4035 12mm x 1.25WN404 WN4045 12mm x 1.50
OEM LUG NUTSSets of 4 Loose Thread Size
WN501 WN501-50 7/16”WN502 WN502-50 1/2”WN503 WN503-50 12mm x 1.25WN504 WN504-50 12mm x 1.50
MAG NUT WASHERLOOSE
WN200W Standard - Packs of 10 and 50WN210W Small Mag Nut Washer(26mm O.D.)
Packs of 10 and 50WN850W Cragar Offset - Packs of 5WN900W Cragar - Packs of 5
DISC BRAKE SPACERS/WHEEL SPACERSUniversal spacers - Packed as a pair.
WS3000 Suits 4 and 5 Stud 3mm thick WS4000 4 Stud Bolt Pattern
1/4” thickWS5000 5 Stud Bolt Pattern
5/16” thickWS6000 5 Stud Liqht Truck
and 4WD 1/4” thick
Spare Lock Nut Keys are available by Key Number
56
SMALL - CCS & CCS -WPFits cars and boats up to 4 metres approx.Daihatsu Charade, Ford Escort, Honda Civic,Hyundai Excel, Mazda 121 - 323 (Early 1977-1990),Suzuki Swift - Vitari, VW Golf
MEDIUM - CCM & CCM -WPFits cars and boats 4 to 4.3 metres approx.Ford Telstar, Honda Accord - Prelude, HoldenApollo - Torana, Mazda RX7, Mitsubishi Lancer,Nissan Pintara, Toyota Corolla Hatch
LARGE - CCL & CCL -WPFits cars and boats 4.4 to 4.8 metres approx.Audi-Most, BMW 3 & 5 Series, Ford Early Falconsto XF, Holdens-Most, Mazda 929, MitsubishiSigma,Nissan Bluebird, Toyota Camry - Celica -Lexcen
EXTRA LARGE - CCXL & CCXL -WPFits cars and boats 4.9 to 5.3 metres approx.BMW 7 Series, Ford Fairlane, Holden Statesman,Jaguars, Volvo 740
- All Weather 100% Breathable Dustproof Cover -
SMALL MEDIUM LARGE
DUST PROOF WATER PROOF
EXTRALARGE
Fits up to 4m Fits 4 - 4.3m Fits 4.4 - 4.8m Fits 4.9 - 5.3mapprox approx approx approx
For example:
Honda Civic Corolla Hatch Most Ford Falcon Ford FairlaneHyundai Excel Holden Apollo Mazda 929 Holden StatesmanMazda 121 Mazda RX7 Most Holdens JaguarsVW Golf Mitsubishi Lancer Toyota Camry Volvo 740
CAR COVERMADE FROM 100% BREATHABLE WATERREPELLENT FABRIC
ALL WEATHERWATERPROOF COVER
DUST PROOF
WATER PROOF
Speco car cover 1/12/06 12:36 PM Page 1
- All Weather 100% Waterproof Cover -
2 Styles Available
CAR COVERSCAR COVERS
Note:- Waterproof Covers have prefix -WPat the end of each part number
57
VHT - Product Listing
SP734 GLOSS BLACKSP735 CAST ALUMINIUMSP736 GOLDSP738 YELLOWSP739 SATIN BLACK
SANDABLE PRIMERSSP301 WHITESP302 DARK GRAYSP303 RED OXIDESP304 LIGHT GRAYSP305 BLACKSP306 ZINC CHROMATE YELLOW
QUICK-COAT ENAMELSSP501 FIRE REDSP503 BRIGHT ORANGESP504 GLOSS BLACKSP505 OCEAN BLUESP507 BRIGHT ALUMINIUMSP508 BRIGHT YELLOWSP509 GLOSS WHITESP510 FLAT BLACKSP511 FLAT WHITESP512 FOREST GREENSP513 MACHINERY GRAYSP514 GOLDSP515 CLEARSP524 APPLIANCE WHITESP525 SILVER CHROMESP551 DARK METALIC GREY
EPOXY SPRAY PLATE FINISHESSP5251 CHROME SPRAY
VINYL & CARPET SPRAY DYESP39 VINYL & PLASTIC PREP. CLEANERSP941 GLOSS BLACKSP942 SATIN BLACKSP943 SATIN WHITESP944 BUCKSKINSP945 DARK BROWNSP946 SILVER SATINSP947 SATIN REDSP950 DARK BLUESP951 MEDIUM BLUESP953 LIGHT GRAYSP954 CHARCOAL GRAYSP956 MIDNIGHT BLUE
FLAMEPROOF COATINGSSP101 FLAT WHITESP102 FLAT BLACKSP104 FLAT GRAYSP106 FLAT SILVERSP108 FLAT YELLOWSP109 FLAT REDSP110 FLAT BLUESP114 ORANGESP115 CLEARSP117 FLAT ALUMINIUMSP118 PRIMERSP998 ‘NU-CAST’GRAY CAST
IRON MANIFOLD
ENGINE ENAMELSSP119 HOLDEN ORANGE
**SAME AS ROCKET RED**SP120 HOLDEN BLUESP120C CHRYSLER HEMI ORANGESP121 BRIGHT REDSP122 PONTIAC BLUESP123 CHEVY ORANGESP124 GLOSS BLACKSP125 FORD DARK BLUESP126 EARLY CHRYSLER BLUESP127 ALUMINIUMSP128 GLOSS YELLOWSP129 GLOSS WHITESP130 FLAT BLACKSP131 FORD GREENSP132 GOLDSP133 CHEVY V8 BLUESP134 FORD LIGHT BLUESP135 GM BLUESP136 LATE CHRYSLER BLUESP137 FORD GRAYSP138 NEW FORD BLUE (U.S.)SP139 GM SATIN BLACKSP145 CLEARSP754 MAGENTASP755 FORD COMPETITION BLUESP756 HOT PINKSP758 LAVENDERSP760 KERMIT GREENSP763 LEYLAND GREENSP995 ‘NU-CAST’ALUMINIUMSP997 ‘NU-CAST’CAST IRON GRAY
CALIPER & BRAKE DRUM PAINTSP730 CLEARSP731 REDSP732 BLUESP733 ORANGE
VHT - Product Listing
58
EPOXY STOP RUSTSP650 GLOSS BLACKSP651 GLOSS WHITESP652 SATIN BLACKSP654 GLOSS REDSP656 STAINLESS STEELSP657 ALUMINIUM
EPOXY ROLL BAR PAINTSP670 GLOSS BLACKSP671 SATIN BLACK
MOTORCYCLE PRODUCTSSP25-4 FOG BLOCKER - ANTI MIST SPRAYSP903 BLACK OXIDE CASE PAINTSP905 GLOSS BLACK CYL BARREL PAINTSP906 SATIN BLACK CYL BARREL PAINTSP921 CHAIN LUBE
FILTER CLEANER/OILSP930 AIR FILTER CLEANERSP931 FOAM FILTER OILSP932 GAUZE FILTER OIL
CAMOUFLAGE PAINTSP221 MILITARY TANSP222 MILITARY BROWNSP223 MILITARY BLACK
TRACKBITESP162.2 2.5 LITRESP162.10 10 LITRESP163.55 205 LITRE
CHEMICALSSP3-20 PJI CONTACT CLEANERSP11 BRAKE & CLUTCH PARTSSP18 CONTACT ADHESIVE SPRAYSP21 “T0RQUETITE”
COPPER GASKET CEMENTSP575 PAINT STRIPPERSP701 ENGINE ASSEMBLY LUBE
& ANTI-SCUFFSP880 RUST TREATMENT & CONVERTER
(500ml)SP880.5 RUST TREATMENT & CONVERTER
(5 LITRE)
GLASS & METAL TINTSSP171 SMOKE WINDOW TINTSP999 ”NIGHT SHADES”
LENS BLACKOUT TINTSP231 BLUE METAL TINTSP232 RED METAL TINTSP233 GOLD METAL TINT
WRINKLE FINISHESSP201 BLACKSP204 RED
WHEEL PAINTSSP181 ALUMINIUMSP183 SATIN BLACKSP184 CLEAR COATSP186 RALLY SILVERSP187 GLOSS BLACK
SPRAY LACQUERSSP607 GLOSS BLACKSP609 GLOSS WHITESP610 CLEAR
BONNET AND BOOTSP27 BLACK HOOD, BUMPER & TRIM
PAINT
Full colourcatalogueavailable now!
59
TERMS - of Trading
LIABILITY & DISCLAIMERAny claim for damages or liability in respect of defectivemerchandise is limited to the replacement or repair of thedefective item only. This option will be at the solediscretion of Speco Thomas Pty Ltd. Any manufacturers’names, numbers, symbols, trade names, trade marks anddescription are used for reference and applicationpurposes only and it is not intended or implied that anyproduct listed is the product of the manufacturer.
CATALOGUES• Available upon request
• Wheel Nuts & Lock Nuts (application listing)
• Rubber Hoses and Associated Products
• VHT Product Usage Guide
• Speco Meter
PAYMENT OF ACCOUNTSAll accounts are due for payment net, 30days. Credit facilities will be withdrawnfrom customers who do not comply withthe stated terms and this action wouldnecessitate the renegotiation of creditfacilities and discounts if required.Non-account customers will be supplied ona ‘cash with order’ basis only. We do notship C.O.D. via a carrier, however we canship C.O.D. by Australia Post (excludingaerosols).
FREIGHTAny freight charges and insurance are thesole responsibility of the customer and anyclaims for damage or shortages must belodged directly with the carrier concerned.Please nominate the carrier of your choiceand supply your account number for ourrecords.
RETURNSGoods will not be accepted for credit after14 days from date of delivery note unlessprior arrangements have been made andconfirmed with the company. Freight mustbe prepaid on any returns and this is thesole responsibility of the customer. Fulldetails of the - Part Number - Quantity -Delivery Docket and Invoice Number - Dateof Receipt -Reason for Return - mustaccompany any goods returned for creditto ensure correct processing. The companywill not issue a credit nor accept anyresponsibility for goods not meeting theserequirements.
Designed and Printed by Fleetwood Print Group152 Myers Street Geelong, 3220 Vic. Ph: (03) 5222 1200
Email: [email protected]
DON’T STOP FOR A LEAK!This will seal your radiator or engine water leaks in quicktime.
Available from leading automotive stores. Or contact the distributors Speco Thomas Pty. Ltd.
1b Levanswell Road, Moorabbin, Victoria 3189. Phone: (03) 9555 7244 Fax: (03) 9553 2841
Email: [email protected] Web: www.speco.com.au
SILVERSEAL
And for under $6!
Famous in the USA since 1928.
R
SPECO SILV.SEAL1/2p color ad 16/11/05 10:17 AM Page 1
We’ve got the tacho you want...and the temp gauges, pressure gauges, boost gauges,
volt meters and lots more !
We’ve got the tacho you want...and the temp gauges, pressure gauges, boost gauges,
volt meters and lots more !
Why pay moreSpeco Thomas Pty. Ltd. 1b Levanswell Road Moorabbin 3189.Check out the full range of Speco and VHT products –www.speco.com.au Email: [email protected]
5” Shift-light tachoEasy reading monster
tacho with external
shift light. 8000 and
11000 rpm versions.
4” Shift-lighttachoSuper popular
mid-size tacho.
External and internal
shift-lights. 8000 rpm.
33/4” Shift-light tachoWhite face version features
on-dial shift-light and electronic
touch pad buttons. Black face
has knob rev setting.
Both 8000 rpm.
Check out our programmablespeedo and matching tacho
on the Speco website
25/8” Performance SeriesIdeal for in-dash or pod
mounting. Black or white dial.
8000 rpm.
2” Sports Series Attractive silver face with fixed
silver bezel. In-dash or pod mounting.
Pods and panels available in chrome
or black. 8000 rpm.
TOUGH CHOICETOUGH CHOICE
DISTRIBUTED BY:
PTY LTD ABN 51 357 001 657
1 B LEVANSWELL ROAD MOORABBIN
VICTORIA 3189 AUSTRALIA
Phone: (03) 9555 7244 (5 lines)Fax: (03) 9553 2841Email: [email protected] Web: www.speco.com.au