8
WHEEL BLOC ROLLCOMPACT - Series RC Page: 1 Drive unit - RC-Series • a powerful and reliable drive unit • low maintenance cost by using standard tools • easy to replace components-like changing the spare wheel on a motor car • dual speed as standard electronic (variable speed drive optional) • standard tropical insulation to class f, protection to lP 54 • suitable for every application • direct drive hardened and polished helical gears with oil-bath lubrication • special plastic drive wheels with 4 times better friction on steel tracks energy absorbing buffers to protect your installation Drive unit - RC-Series The RC-Series (example: RC800 with guide rollers) is designed for a wheel load up to 32000 kg. As a result, this building block system enables you to modify the the drive later on or to select a solution for special requirements. To the left you see a drive unit RC800 with safety plate. Motors are with plug connection. WHEEL BLOC SYSTEM ROLLCOMPACT - Series RC 400 - 32000 kg (wheel pressure) Good cost- performance ratio Stepless speed available Silent wheels ! Building bloc system www.Abe-Tec. de/ea Abe-Tec East Africa Ltd. P.O. Box 1444-00606 Nairobi - Kenya Contact Abe-Tec Group - Germany - Nordring 14-16 - 24850 Schuby/Hamburg - Tel. +49-(0)40-60889-091 - Fax. +49-(0)40-60889-119 eMail: [email protected] Tel. +254 - (0)772 - 721117 Fax. +254 - (0)20 - 551397 Mobile. +254 - (0)722 - 527440

WHEEL BLOC ROLLCOMPACT - Series RC WHEEL BLOC SYSTEM ...RC).pdf · wheel bloc rollcompact - series rc page: 2 applications of wheel block series rc list of contents page contents

  • Upload
    others

  • View
    4

  • Download
    1

Embed Size (px)

Citation preview

Page 1: WHEEL BLOC ROLLCOMPACT - Series RC WHEEL BLOC SYSTEM ...RC).pdf · wheel bloc rollcompact - series rc page: 2 applications of wheel block series rc list of contents page contents

WHEEL BLOC ROLLCOMPACT - Series RCPage: 1

Drive unit - RC-Series

• a powerful and reliable drive unit• low maintenance cost by using standard tools• easy to replace components-like changing the spare wheel on a

motor car• dual speed as standard electronic (variable speed drive optional)• standard tropical insulation to class f, protection to lP 54• suitable for every application• direct drive hardened and polished helical gears with oil-bath

lubrication• special plastic drive wheels with 4 times better friction on steel

tracks energy absorbing buffers to protect your installation

Drive unit - RC-Series

The RC-Series (example: RC800 with guide rollers) is designed fora wheel load up to 32000 kg.As a result, this building block system enables you to modify thethe drive later on or to select a solution for special requirements.

To the left you see a drive unitRC800 with safety plate.Motors are with plug connection.

WHEEL BLOC SYSTEMROLLCOMPACT - Series RC400 - 32000 kg (wheel pressure)

Good cost-

performance ratio

Stepless

speed available

Silent wheels !

Buildingbloc

system

www.Abe-Tec.de/eaAbe-Tec East Africa Ltd. P.O. Box 1444-00606Nairobi - Kenya

Contact Abe-Tec Group - Germany - Nordring 14-16 - 24850 Schuby/Hamburg - Tel. +49-(0)40-60889-091 - Fax. +49-(0)40-60889-119

eMail:[email protected]

Tel. +254 - (0)772 - 721117 Fax. +254 - (0)20 - 551397 Mobile. +254 - (0)722 - 527440

Page 2: WHEEL BLOC ROLLCOMPACT - Series RC WHEEL BLOC SYSTEM ...RC).pdf · wheel bloc rollcompact - series rc page: 2 applications of wheel block series rc list of contents page contents

WHEEL BLOC ROLLCOMPACT - Series RCPage: 2

APPLICATIONS OF WHEEL BLOCK SERIES RC

LIST OF CONTENTS

PAGE CONTENTS

2 APPLICATIONS OF WHEEL BLOCK ROLLCOMPACT - SERIES RC

3 CALCULATION ACCORDING TO ISO + FEM STANDARD´S

4 MODELS

5 TECHNICAL DATA

6 TRAVEL MOTOR DATA

7 SELECTION TABLE FOR MOTORS

8 SELECTION OF ROLLCOMPACT

D

H

S

N

A

E

K

O

C

G

M

R

B

F

L

P

www.Abe-Tec.de/eaAbe-Tec East Africa Ltd. P.O. Box 1444-00606Nairobi - Kenya

Contact Abe-Tec Group - Germany - Nordring 14-16 - 24850 Schuby/Hamburg - Tel. +49-(0)40-60889-091 - Fax. +49-(0)40-60889-119

eMail:[email protected]

Tel. +254 - (0)772 - 721117 Fax. +254 - (0)20 - 551397 Mobile. +254 - (0)722 - 527440

Page 3: WHEEL BLOC ROLLCOMPACT - Series RC WHEEL BLOC SYSTEM ...RC).pdf · wheel bloc rollcompact - series rc page: 2 applications of wheel block series rc list of contents page contents

WHEEL BLOC ROLLCOMPACT - Series RCPage: 3

120

80504032

20

106,3

5

ROLLCOMPACT - PERFORMANCE DIAGRAM

1 2 3 4

2 3 4 5 6 7 8 91012 15 20 25 30 40 50 60 80 100 150 200

2 3 4 5 6 7 89 10 12 15 20 2530 40 50 60 80 100 150 200

2 3 4 5 6 7 89 10 12 15 20 25 30 40 50 60 80 100 150 200

300

200

150

100

75

50

30

20

10

5

3

2

1

400

300

200

100

60

40

20

10

6

4

2

800

600

400

200

120

80

40

20

12

8

4

800

400

240

160

80

40

24

16

8

800

480

320

160

80

48

32

16

960

640

320

160

96

64

32

120

63

40

20

12,510

8

5

120

63

40252016

10

5

1008063

40

2012,5

10

2 3 4 5 6 7 89 10 12 15 20 25 30 40 50 60 80 100 150 200

2 3 4 5 67 89 1012 15 20 2530 40 50 60 80 100 150 200

2 3 4 5 6 7 89 1012 15 20 25 30 40 50 60 80 100 150 200

FEM - STANDARD Number of runs per hour in a 8 hours period.

M31 Bm

1 Am

M4

2 m

M5

3m

M6

4m

M7

5m

M8

Fahrgeschwindigkeitm/min

90 10 TIME %

50 50 TIME %

LOAD%

LOAD%

LOAD%

LOAD%

10 40 50 TIME %

1 light

2 medium

3 heavy

4 very

heavy

16,7 16,716,7 50 TIME %

Power drives which are usually subject to very small loads and in

exceptional cases only maximum loads.

ISO - Standard M 3 M 4 M 5 M6 M7

FEM - Standard 1 Bm 1 Am 2 m 3 m 4 mOperating hours per day ‡ 2 ‡ 4 ‡ 8 ‡ 16 > 16

Total life expectancy in hours 3200 6300 12500 25000 50000 1

Power drives which are usually subject to small loads but rather

often to maximum loads.

ISO - Standard M 3 M 4 M 5 M6 M 7 M 8

FEM - Standard 1 Bm 1 Am 2 m 3 m 4 m 5 mOperating hours per day ‡ 1 ‡ 2 ‡ 4 ‡ 8 ‡ 16 > 16

Total life expectancy in hours 1600 3200 6300 12500 25000 50000 2

Power drives which are usually subject to medium loads but frequently

to maximum loads.

ISO - Standard M 3 M 4 M 5 M6 M 7 M 8

FEM - Standard 1 Bm 1 Am 2 m 3 m 4 m 5 mOperating hours per day ‡ ½ ‡ 1 ‡ 2 ‡ 4 ‡ 8 ‡ 16

Total life expectancy in hours 800 1600 3200 6300 12500 25000 3

Power drives which are usually subject to maximum or almost to

maximum loads.

ISO - Standard M 3 M 4 M 5 M6 M 7 M 8

FEM - Standard 1 Bm 1 Am 2 m 3 m 4 m 5 mOperating hours per day ‡ ¼ ‡ ½ ‡ 1 ‡ 2 ‡ 4 ‡ 8

Total life expectancy in hours 400 800 1600 3200 6300 12500 4

www.Abe-Tec.de/eaAbe-Tec East Africa Ltd. P.O. Box 1444-00606Nairobi - Kenya

Contact Abe-Tec Group - Germany - Nordring 14-16 - 24850 Schuby/Hamburg - Tel. +49-(0)40-60889-091 - Fax. +49-(0)40-60889-119

eMail:[email protected]

Tel. +254 - (0)772 - 721117 Fax. +254 - (0)20 - 551397 Mobile. +254 - (0)722 - 527440

Page 4: WHEEL BLOC ROLLCOMPACT - Series RC WHEEL BLOC SYSTEM ...RC).pdf · wheel bloc rollcompact - series rc page: 2 applications of wheel block series rc list of contents page contents

WHEEL BLOC ROLLCOMPACT - Series RCPage: 4

MODELS

RCGA

- with motor

- without guide rolls

- without guide plate

RCBA

- with motor

- with guide plate

- without guide rolls

RCLA

- with motor

- with guide rolls

RCTA

- with motor

- with right-hand guide roll

for direct run on runway

girder flange

RCPA

- with motor

- without guide rools

- with guide plate for

direct run on runway

girder flange

RCYA

- with motor

- with two guide rolls for

direct run on runway

girder flange

RCGM

- without motor

- without guide rolls

- without guide plate

RCBM

- without motor

- with guide plate

- without guide rolls

RCLM

- without motor

- with guide rolls

RCIM

- without motor

- with left-hand guide roll

for direct run on runway

girder flange

RCPM

- without motor

- without guide rools

- with guide plate for

direct run on runway

girder flange

RCYM

- without motor

- with two guide rolls for

direct run on runway

girder flange

www.Abe-Tec.de/eaAbe-Tec East Africa Ltd. P.O. Box 1444-00606Nairobi - Kenya

Contact Abe-Tec Group - Germany - Nordring 14-16 - 24850 Schuby/Hamburg - Tel. +49-(0)40-60889-091 - Fax. +49-(0)40-60889-119

eMail:[email protected]

Tel. +254 - (0)772 - 721117 Fax. +254 - (0)20 - 551397 Mobile. +254 - (0)722 - 527440

Page 5: WHEEL BLOC ROLLCOMPACT - Series RC WHEEL BLOC SYSTEM ...RC).pdf · wheel bloc rollcompact - series rc page: 2 applications of wheel block series rc list of contents page contents

WHEEL BLOC ROLLCOMPACT - Series RCPage: 5

Type RC RC RC RC RC RC RC400 800 1250 1600 2000 2500 3200

Wheel Æ 160 250 315 400 500 630 630RA 360 360 472 472 670 670 670RB 180 180 236 236 335 335 335RD 120 120 182 182 220 220 220RE M24 M24 M24 M24 M24 M24 M24RF 72 72 90 90 90 90 90RG 202 141 197 197 287 287 287RH 100 100 92 92 160 160 160RI 20 20 20 20 30 30 30RK 13 58 36 79 70 135 135RL 61 61 53 53 145 145 145RM 48 48 48 48 59 59 59RN 77 77 171 171 210 210 210RO --- --- 48 48 56 56 56RP 51 51 48 48 50 50 50RQ 250 295 404 447 590 655 655RR 64 64 85 85 107 107 107RS 63 63 94 94 134 134 134RT 130 130 130 130 150 150 150RU 270 315 424 467 615 685 685RV 19 19 20 20 35 35 35RW --- --- 230 230 --- --- ---RX --- --- 69 69 --- --- ---RY --- --- M20 M20 --- --- ---RZ --- --- 48 48 --- --- ---R1 152 152 152 152 152 152 152R2 275 275 275 275 280 280 280R3 304 304 304 304 304 304 304R4 55 65 80 80 85 90 90R5 115 115 125 125 150 150 170R6 80 80 100 100 125 125 125R7 40 40 80 80 110 110 110R8 21 21 38 38 52 52 52R9 25 25 25 25 25 25 25Z* Z20 Z20 Z50 Z50 Z50 Z50 Z50PA 105 105 135 135 145 145 145PB 100 100 130 130 160 160 160PC 120 120 120 120 270 270 270PU kN 70 70 160 160 240 240 290

ROLLCOMPACT - INTEGRAL BUFFERSPU kN is the total force for both buffers of the ROLLCOMPACTand the end of the runway and is worked out for maximum wheelpressure up to travel speed 40 m/min, other forces should becalculated according to the formula. For higher speed werecommend the preliminary crane travel limit switch.

Z20 96 Z50 96

RC3200123189

0,170,47

A 120100 x 50

RC2500

118183

0,170,47

A 100100 x 50

RC2000106171

0,160,42

A 100100 x 50

RC1600

5276

0,080,20A 75

80 x 40

RC1250

4771

0,070,18A 75

80 x 40

RC8002329

0,040,09A 65

60 x 30

RC4002026

0,040,08A 55

50 x 30

RCTMG RCBMG

RCLMG

RCYMG

I = Guide rollerslieft

T = Guide rollersright

Measurement (All dimensions in mm.)

"MA + MB" seetravel motor data

RCLAG

RCLMG

IdlingDrivenIdlingDrivenRail sizemm

Weightnet kg

CIF -Datam3

Rail sizes are worked out for max. wheel pressures. For reduced wheel pressure, rail sizes should be calculated acc. to formula.

www.Abe-Tec.de/eaAbe-Tec East Africa Ltd. P.O. Box 1444-00606Nairobi - Kenya

Contact Abe-Tec Group - Germany - Nordring 14-16 - 24850 Schuby/Hamburg - Tel. +49-(0)40-60889-091 - Fax. +49-(0)40-60889-119

eMail:[email protected]

Tel. +254 - (0)772 - 721117 Fax. +254 - (0)20 - 551397 Mobile. +254 - (0)722 - 527440

Page 6: WHEEL BLOC ROLLCOMPACT - Series RC WHEEL BLOC SYSTEM ...RC).pdf · wheel bloc rollcompact - series rc page: 2 applications of wheel block series rc list of contents page contents

WHEEL BLOC ROLLCOMPACT - Series RCPage: 6

ISO Standard M 3 M 4 M 5 M6 M 7 M 8 Dimen-

FEM - Gruppe 1 Bm 1 Am 2 m 3 m 4 m 5 m Brake sions

Motor duty cycle 15/25 % 15/30 % 20/40 % 25/50 %30/60 % 30/60 % Nm ROLL- CiF

Starts/h 150 180 240 300 360 360 Stan- Alter-COMPACT MA MB

Motor rpm KW KW KW KW KW KW dard native RC mmmm kg m3

111 1400 0,30 0,28 0,25 0,20 0,18 0,18 2 5 280 130 10 0.02

112 1400 0,45 0,40 0,37 0,30 0,25 0,25 2 5 400-800 300 140 12 0.03

113 1400 0,65 0,60 0,55 0,45 0,40 0,40 5 10 300 140 13 0,03

114 2800 0,30 0,28 0,25 0,20 0,18 0,18 2 5 280 130 10 0.02

115 2800 0,45 0,40 0,37 0,30 0,25 0,25 2 5 400-800 280 130 10 0.02

116 2800 0,65 0,60 0,55 0,45 0,40 0,40 2 5 10 -z3200 300 140 12 0,03

117 2800 0,85 0,80 0,75 0,65 0,55 0,55 2 5 10 300 140 12 0,03

118 350/1400 0,07/0,30 0,07/0,28 0,06/0,25 0,05/0,200,04/0,18 0,04/0,18 2 5 10 300 140 13 0,03

119 350/1400 0,11/0,45 0,10/0,40 0,09/0,37 0,07/0,300,06/0,25 0,06/0,25 2 5 10 400-800 340 160 15 0,04

120 350/1400 0,16/0,65 0,15/0,60 0,14/0,55 0,11/0,450,10/0,40 0,10/0,40 5 10 16 340 160 16 0,04

121 700/2800 0,07/0,30 0,07/0,28 0,06/0,25 0,05/0,200,04/0,18 0,04/0,18 2 5 10 300 140 13 0,03

122 700/2800 0,11/0,45 0,10/0,40 0,09/0,37 0,07/0,300,06/0,25 0,06/0,25 2 5 10 300 140 13 0,03

123 700/2800 0,16/0,65 0,15/0,60 0,14/0,55 0,11/0,450,10/0,40 0,10/0,40 2 5 10 300 140 13 0,03

124 700/2800 0,21/0,85 0,20/0,80 0,19/0,75 0,16/0,650,14/0,55 0,14/0,55 2 5 10 400-800 340 160 15 0,04

125 2800el 0,65 0,60 0,55 0,45 0,40 0,40 2 5 10 -z3200 300 140 12 0,03

126 2800el 0,85 0,80 0,75 0,65 0,55 0,55 2 5 10 300 140 13 0,03

127 2800el 1,20 1,15 1,10 0,95 0,85 0,85 5 10 20 340 160 14 0,04

128 2800el 1,60 1,55 1,50 1,25 1,15 1,15 5 10 20 340 160 15 0,04

129 1400 0,65 0,60 0,55 0,45 0,40 0,40 5 10 300 140 13 0,03

130 1400 0,85 0,80 0,75 0,65 0,55 0,55 5 10 20 340 160 15 0,04

131 1400 1,20 1,15 1,10 0,95 0,85 0,85 10 20 340 160 15 0,04

132 1400 1,60 1,55 1,50 1,25 1,15 1,15 10 20 360 180 24 0,05

133 2800 0,85 0,80 0,75 0,65 0,55 0,55 2 5 10 300 140 12 0,03

134 2800 1,20 1,15 1,10 0,95 0,85 0,85 5 10 20 340 160 14 0,04

135 2800 1,60 1,55 1,50 1,25 1,15 1,15 5 10 20 340 160 15 0,04

136 350/1400 0,16/0,65 0,15/0,60 0,14/0,55 0,11/0,450,10/0,40 0,10/0,40 5 10 20 340 160 16 0,04

137 350/1400 0,21/0,85 0,20/0,80 0,19/0,75 0,16/0,650,14/0,55 0,14/0,55 10 20 360 180 25 0,05

138 350/1400 0,33/1,20 0,28/1,15 0,28/1,10 0,23/0,950,21/0,85 0,21/0,85 10 20 380 180 26 0,05

139 350/1400 0,40/1,60 0,38/1,55 0,37/1,50 0,31/1,250,28/1,15 0,28/1,15 10 20 40 1250 - 440 200 37 0,06

140 700/2800 0,21/0,85 0,20/0,80 0,19/0,75 0,16/0,650,14/0,55 0,14/0,55 2 5 10 3200 340 160 15 0,04

141 700/2800 0,33/1,20 0,28/1,15 0,28/1,10 0,23/0,950,21/0,85 0,21/0,85 10 20 360 180 24 0,05

142 700/2800 0,40/1,60 0,38/1,55 0,37/1,50 0,31/1,250,28/1,15 0,28/1,15 10 20 380 180 25 0,05

143 700/2800 0,57/2,30 0,56/2,25 0,55/2,20 0,45/1,800,42/1,70 0,42/1,70 10 20 40 440 200 36 0,06

144 2800el 0,85 0,80 0,75 0,65 0,55 0,55 2 5 10 300 140 12 0,03

145 2800el 1,20 1,15 1,10 0,95 0,85 0,85 5 10 20 340 160 14 0,04

146 2800el 1,60 1,55 1,50 1,25 1,15 1,15 5 10 20 340 160 15 0,04

147 2800el 2,30 2,25 2,20 1,80 1,70 1,70 10 20 360 180 24 0.05

148 2800el 3,40 3,20 3,00 2,50 2,30 2,30 10 20 380 180 25 0,05

149 2800el 4,50 4,20 4,00 3,30 3,00 3,00 20 40 60 440 200 36 0.06

150 2800el 6,50 6,00 5,50 4,40 4,00 4,00 20 40 60 470 220 43 0,07

151 2800el 8,50 8,00 7,50 6,00 5,50 5,50 40 60 80 2000- 510 260 65 0,10

152 2800el 10,50 10,00 9,20 7,00 6,50 6,50 40 60 80 3200 510 260 65 0,10

TRAVEL MOTOR DATA

www.Abe-Tec.de/eaAbe-Tec East Africa Ltd. P.O. Box 1444-00606Nairobi - Kenya

Contact Abe-Tec Group - Germany - Nordring 14-16 - 24850 Schuby/Hamburg - Tel. +49-(0)40-60889-091 - Fax. +49-(0)40-60889-119

eMail:[email protected]

Tel. +254 - (0)772 - 721117 Fax. +254 - (0)20 - 551397 Mobile. +254 - (0)722 - 527440

Page 7: WHEEL BLOC ROLLCOMPACT - Series RC WHEEL BLOC SYSTEM ...RC).pdf · wheel bloc rollcompact - series rc page: 2 applications of wheel block series rc list of contents page contents

WHEEL BLOC ROLLCOMPACT - Series RCPage: 7

m/min Motornumber

RC RC RC RC RC RC RC

ISO - FEM 400 800 1250 1600 2000 2500 3200

M 3 -1 Bm 4000 8000 1250016000 20000 2500032000

M 4 -1 Am 3200 6300 1000012500 16000 2000025000

M 5 - 2 m 2500 5000 8000 10000 12500 1600020000

M 6 - 3 m 2000 4000 6300 8000 10000 1250016000

M 7 - 4 m 1600 3200 5000 6300 8000 1000012500

M 8 - 5 m 1250 2500 4000 5000 6300 8000 10000

5

6,3

8

10

12,5

16

20

25

31,5

40

50

63

80 128 148 149 150 151

100 148 149 150 151

120 150 151 152

131

138

132

139

143

147

148

149

134141145

135142146

143

147

148

113

120

117124126

127

130

137

131

138

134141145

135142146

143

147

111

118

112

119

115

122

116

123

125

117

124

126

117Z*

124Z*

126Z*

114Z*

121Z*

115Z*

122Z*

129

136

133

140

144

134141145

135142146

143

147

116Z*

123Z*

125Z*116Z*

123Z*

125Z*

116Z*

123Z*

125Z*

116Z*

123Z*

125Z*

131

138

132

139

143

147

148

149

150

SELECTION TABLE FOR MOTORS

SELECTION TABLE FOR MOTORS

www.Abe-Tec.de/eaAbe-Tec East Africa Ltd. P.O. Box 1444-00606Nairobi - Kenya

Contact Abe-Tec Group - Germany - Nordring 14-16 - 24850 Schuby/Hamburg - Tel. +49-(0)40-60889-091 - Fax. +49-(0)40-60889-119

eMail:[email protected]

Tel. +254 - (0)772 - 721117 Fax. +254 - (0)20 - 551397 Mobile. +254 - (0)722 - 527440

Page 8: WHEEL BLOC ROLLCOMPACT - Series RC WHEEL BLOC SYSTEM ...RC).pdf · wheel bloc rollcompact - series rc page: 2 applications of wheel block series rc list of contents page contents

WHEEL BLOC ROLLCOMPACT - Series RCPage: 8

Our Example:

4 x 14000 kg

R = 14000 kg

N = 2

= ISO M3 / FEM 1 Bm

W = 350 N/m²

A = 4,0 m²

S = 15 °

V = 40 m/min

B = 2

L = 10 m

R*

R*W = 145x4A:2 N

= 290 kg

R*S = 0,09x14000:2 N

= 630 kg

R* = R+R*W+R*S

=14000+290+630

= 14920 kg

V = 40 m/min

R* = 14920 kg +

M3/IBm, 40 m/min

134, 141, 145

N = 2x1,2 KW

D = 400 mm

B = 2

L = 10 m

D = 30

X = RC 1600

= 2x1,2 KW

= 30

= 2x1,2:4

= 4x0,6 KW

Example of a typical ROLLCOMPACT - DRIVE calculation

TABLE 1

120

100

80

60

40

20

60 120 180 240 300 v m/min

= 20°C/70°F

= 50°C/120°F

= 75°C/170°F

=100°C/210°F

-40°C/-40°F

mm

R* = C AW 1

400

350

300

250

200

145100 50

TABLE 2

Nmw 2

m2C kg1

350

100 200 300 400 500

RC 3200

RC 2500

RC 2000

RC 1600

RC 1250RC 800

RC 400

N

.

TABLE 3kgkgC2

R* = C • RS 2

N

20 15 10 5

RC 3200

RC 2500

RC 2000

RC 1600

RC 1250

RC 800

RC 400

0,20

0,175

0,15

0,125

0,10

0,09

0,05

0,025

WHEEL

SELECTION OF ROLLCOMPACT

40

The selection of ROLLCOMPACT for special

applications. Narrower tracks or higher

temperature can be calculated according to

Hertz simplified formula below:

p = 25 F N < max p

M • D

2

F = Wheel pressure (N) NEWTON

M = Supported width of wheel

D = Wheel diameter (mm)

The rate of pressure p has to be compared

with the permissible rate of temperature and

travelling speed ( TABLE 1 )

Selection valid

for 4 wheel drive

2 powered wheels

1. Specifications

wheelload per wheel

number of drives

mechanism group

windpressure

square area

incline degrees

speed

load variation

medium travel distance

2. Formula for

equivalent

wheel load

from table 2 with

estimated RC 1600

from table 3 follows

for RC 1600

hence are equivalent

wheel load

3. Motor selection

formula for travelling

speed for examle

from table 4

follows with

motor selection

for 2 Power drives

4. Number of drives

per hour allowed

formula for load

variation for example

and medium travel

distance

following the

performance diagram:

number of

drives per hour

5. Results:

ROLLCOMPACT

motor

number of drives

per hour

by 4 powered wheels

performance

Your Example:

x kg

______________ kg

______________ pcs.

ISO M / FEM m

______________ N/m²

______________ m²

______________ °

______________ m/min

=

______________ m

______________ N

______________ kg

______________ N

______________ kg

______________

______________ kg

______________ m/min

______________ kg +

M / m, m/min

# ___________________

______________ KW

______________

#____________

______________ m

______________

RC ___________

______________ KW

______________

______________ KW

www.Abe-Tec.de/eaAbe-Tec East Africa Ltd. P.O. Box 1444-00606Nairobi - Kenya

Contact Abe-Tec Group - Germany - Nordring 14-16 - 24850 Schuby/Hamburg - Tel. +49-(0)40-60889-091 - Fax. +49-(0)40-60889-119

eMail:[email protected]

Tel. +254 - (0)772 - 721117 Fax. +254 - (0)20 - 551397 Mobile. +254 - (0)722 - 527440