Embed Size (px)
Citation preview
What’s Changed inWhat s Changed in Architectural Cabinets?
AWS Section 10 CaseworkPresented by:Presented by:
Sean McConeghyCommercial CabinetWorksCommercial CabinetWorks
www.ComCabWorks.com
Copyright Materialspy g
This presentation is protected by US and International Copyright laws. Reproduction, distribution, display and use of the presentation without written permission of the speaker is prohibited.
© Architect ral Wood ork Instit te 2010© Architectural Woodwork Institute 2010
The Architectural Woodwork Institute is a Registered Provider with The American Institute of ArchitectsProvider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of this program will be reported to CES Records for AIA members Certificates of Completion for non AIAfor AIA members. Certificates of Completion for non-AIA members are available on request.
This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material f t ti th d f h dli iof construction or any method or manner of handling, using,
distributing, or dealing in any material or product. Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentationconclusion of this presentation.
Learning Objectivesg j
Learn how the AWI Quality Standards Learn how the AWI Quality Standards evolved into the Architectural Woodwork Standards
Learn how to navigate the new Architectural Woodwork Standards for Casework
Gain specific knowledge about exposedGain specific knowledge about exposed, semi-exposed and concealed surfaces on CaseworkL h t i t t d i d Learn how to integrate design and specification for balanced cost-benefit decisions for Casework
Evolution of the AWS
+ =
How has the QSI evolved into the AWS?
1 N l t 1. New layout 2. Information grouped and
organized differentlyorganized differently. Basic considerations Recommendations Recommendations Industry Practices Product Rules Execution Compliance
How has the QSI evolved into the AWS?
I t ll ti f k Installation of casework included in section 10
Execution compliance Execution, compliance sections address installation
Counters in separate section Counters in separate section
Evolution of the AWS
Section 10
Table of Contents
T
Without Specification
to the contraryto the contrary
Table of Contents
T
Adjustable jShelf Loads
Table of Contents
Pr
Material Pg 261
General Pg 258
od Machining Pg 264
Material Pg 261
uc
Assembly Pg 265
t
E ti P 287Execution Pg 287
Compliance Pg 293
Basic Considerations: Surface Finish
Exposed10
Exposed Exterior
Exposed Interior
Concealed
Semi ExposedSemi-Exposed
Basic Considerations: Casework StylesBasic Considerations: Casework StylesStyle 1
10
Type A yp
Type BType B
Style 2
Type A Type B
Basic Considerations: Grain Direction at Stile-and-Rail Doors & Drawer Fronts
Stile and Rail
Product Rules: E C P
Exposed Exteriors
MaterialWood CaseworkExposed Exterior
Product Rules: Hinges
WRAPAROUNDhinges, as
applicable, shallbe let into thebe let into theedge of the
door to maintainproper gapproper gaptolerance.
Product Rules: Fi d d Adj t blFixed and Adjustable Shelving
Fixed /Adjustable
SShelves
Product Rules:Metal Shelf StandardsMetal Shelf Standards and Bored Hole Shelf SupportsSupports
Metal Shelf Standards
Bored Hole Shelf Supports
Product Rules: Joinery
Dadoes, L k J i t PlLock Joints, Plows,
Rabbets, Dowels,
Dowel ScrewsDowel Screws, or
Biscuit JoiningPlatesPlates.
Execution
Well Matched f C l & G ifor Color & Grain
REPAIRS are allowed, provided
h l dthey are neatly made and
inconspicuous when viewed at:viewed at:
6.1.3.1 72" (1830 mm) E6.1.3.2 48" (1219 mm) C6 1 3 3 24” (610 mm) P6.1.3.3 24 (610 mm) P
AWS Quiz6 Questions
AWS - Section 10 Casework - Quiz
“TYPE A” t ti f bi t i“TYPE A” construction for cabinets is:
1. Flush overlay2. Reveal overlay3 Li d3. Lipped4. All the above
AWS - Section 10 Casework - Quiz
E d t i f i d t bExposed exterior surfaces required to be finished include:
1. The underside of cabinet bottoms over 42” AFF
2 Th d id f bi t b tt 48” AFF2. The underside of cabinet bottoms over 48” AFF
3. The underside of cabinet bottoms over 50” AFF
AWS - Section 10 Casework - Quiz
R i t f W d C kRequirements for Wood Casework exposed exterior, transparent finish-Custom Grade include:
1. Use of one species for the entire project
2. No use of ROTARY-CUT VENEER
3. Solid stock and/or plywood to be COMPATIBLE IN COLOR AND GRAIN
4. All the above
AWS - Section 10 Casework - Quiz
Th f ll i i t l t hi hThe following requirements apply to which grade?
4.4.6.9.2.6 WRAPAROUND hinges, as applicable, shall be let into the edge of the door to maintain proper gap tolerance.
Exposed door edges resulting from the NOTCHING for hinges are required to be painted or stained to match.
1. Economy2. CustomCus o3. Premium
AWS - Section 10 Casework - Quiz
I Mit F ld d t ti li t fIs Miter-Fold drawer construction compliant for Custom Grade?
1. Yes2 No2. No3. Only in the Northwest
AWS - Section 10 Casework - Quiz
D b tt l d i t id f t dDrawer bottoms plowed into sides fronts and sub-fronts shall have how many inches of shoulder remaining?shoulder remaining?
1. 1/4” [6.4mm]1. 1/4 [6.4mm]2. 3/8” [9.5mm]3. 1/2” [12.7mm][ ]
Errata Website
Course EvaluationsIn order to maintain high-quality learning experiences, please access
the evaluation for this course by logging into CES Discovery and li ki th C E l ti li k th l ft id f thclicking on the Course Evaluation link on the left side of the page.
Questions?Questions?Sean McConeghy
C CCommercial CabinetWorks
www.ComCabWorks.com
360 857 [email protected]
46179 Westlake Drive, Ste. 120Potomac Falls, VA 20165(571) 323-3636 - www.awinet.org
