What SMS messages can I use with the CalAmp Units?← HardwareCalAmp SMS Messages:

Note: When using SMS, paramaters do NOT have quotes around them.

APN: !R1,2306,0,yourapn.com

Disable auto-provisioning: !R1,1024,35,1,1

Reset: !R3,70,0

Report into PULS !R3,49,129

Report into Rastrac !R3,44,aaa (where aaa is the event that will be sent with the report)

Username: !R1,2314,0,username

Password: !R1,2315,0,password

Status !R0 (This will cause the unit to reply to your phone)

Inbound IP Address !R1,2319,0,xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP Address)

Inbound Port !R1,769,0,yyyy (where yyyy is the port number)

Query APN !RP?2306,0 (you can substitute any of the above indexes to query that parameter)

Note: !RP can be used in place of !R1