(RMD Board Division)

What is

RMD Board?

RMD Board

A New Way of Building

A Green World

Specially Engineered Core

Decorative Layer

Decorative Layer

Upper Layer

Honeycomb Core

Bottom Layer

Tensile Strength

Out-of-plane Sheer StrengthOut-of-plane

Compression Strength

Compression Strength

Patented Technology for Hexagonal Configuration offering excellent properties

Same Strength in all Directions

(RMD Board Division)

• Patented technology

• Co-extruded Multi layer Polypropylene (PP) Sheet with Honeycomb type structure

• �In Line Production�

• 100% Recycleable

• Non Toxic

• Resistant To Mechanical Stress & to Chemical Agents

RMD Board

Why RMD Board…

RMD Board

Unique Selling Propositions

Unique properties

A Host of Mechanical, Thermal and Sound Properties in a Single Product

Recyclable Low Thermal

Conductivity

Energy Efficiency

Noise Absorption

Low Sound Trans-

missionReaction To

Fire

Impact Strength

Compressive Strength

Tensile Strength

Shear Strength

Load Bearing

Light Weight Less

Material

Light Weight, yet Strong & Durable

• High strength to weight ratio

• High tensile strength

Moisture & Water Proof

• 100% water proof

• Maintains damp-proof hygienic atmosphere inside the premises

• Non-Toxic

USPs of RMD Board

Termite, Insect & Bacteria Proof• Non responsive to any insect or termite attack

• No possibility of bacterial growth

• Hence, suitability for Hospitals and food industries too.

USPs of RMD Board

Surface Decoration

• Printable, Paintable and Lamination

Cutting

• DIY, Easy to cut with Knife, Cutter

Better acoustic property :

• Noise Reduction Co efficient (NRC) :

o RMD Board : 0.3

o Gypsum : 0.05

o Plywood : 0.10 - 0.15

o Wood : 0.05 -0.15

Lower Thermal conductivity :

• Saving in Energy Cost :W/(m-K)

o RMD Board : 0.07

o Plywood : 0.13

o Gypsum : 0.48

USPs of RMD Board

USP’s - RMD Board

ASTM - E84 - Class BApproved by

Dubai Civil Defense

• Tough & durable

• Easy to store & handle

• Easy to install & maintain

• Easy to clean & no maintenance

• Cost saving due to extended life span

• Can be custom made to suit all purposes

• Can be painting if used w/o Décor

• Can be pasted on by Wall Paper if used w/o Decor

• Can be cut to required dimensions

User Friendly RMD Board

…besides these USPs ..it brings in Tangibal Savings in terms of …

A Boon for End User

TIME LABOUR Material

SavingsSUBSTAINTIAL REDUCTION

in

• Help us to save our precious wood and wood derivative, which in-turn helps us to reduce deforestation.

• Climatic condition has been changed dramatically over last few years and global warming due to several reasons has created alarming situation in various parts of the world.

RMD board applications in various Building & Construction industry application

Step forward for contributing to the society and the nation to curb the usages of wood products and support in conserving our valuable forest and natural

resources. .

RMD Board - A Green Product

• Reusability, Recyclability and higher salvage value.

• Being lighter consumes less fuel in Transportation

• Less carbon emission & so reducing further depletion of ozone layer.

• Reduction in load bearing in structure & so indirect savings in project cost.

RMD Board - A Green Product

Awarded and Recognized in Material Innovations

The Applications

Limited by one�s Imagination

Focus Sector

Building & Construction

• Wall Covering

• Wall Paneling

• False Ceiling

• Shuttering

• Site fencing

• Flooring

• Dry wall partition

• Toilet partition

• Temporary Floor Protection

Applications

Wall Panels False Ceilings Wall Covering

Our Focus : Product Lines

Supplemented by : Floor Protection / Dry wall Partition.

Chip Boards Timber

Veneer Laminates Metals

Marble Stone

Granite Ceramic Wall Paper

Uniquely Engineered to deliver a True VALUE

Conventional Solutions

MDFFabric

Wall Paint Plywood Gypsum

Why ?…………

• Unique properties

• 400 + Designs available to replace conventional

solutions

• Customised > 1000 designs *(25000 Sq. Mtr : min order)

Say Good Bye

• Installation : Cut & Paste on Good block wall* or on 10 MM Plaster Wall /Any Surface

• Thickness : : 5 mm +/- 10 %

• Marble /Stone/ Wooden/Any custom made designs

• > 100 +designs ready

• Very light weight :

• ~ 4.5 kg (+/- 10%) v/s 70 Kg. of marble/granite

• Easy to cut : no chipping, dust free, Noise free installation

• Easy to fix – Just Paste

• Cost Saving - less manpower

• Less wastage – Only Burr

• Stain free - Resistance to common cleaning chemical

• Surface Protection : Coated for Scratch resistance

RMD Wall Coverings

* Max. Size : 8’ x 4’ , High resolution image required Some Projects...

Our Universe Of Customers and Projects

L&T Reality, Mumbai

Recent Projects

Nakheel Head Office, Dubai

Biggest stand in Big 5 Dubai Exhibition in 2016

And…

RMD Marble Wall Covering

Can be used as

Backlit Marble Panels

Espana Lounge Bar @ Jumeirah Creekside Hotel, Dubai

Espana Lounge Bar @ Jumeirah Creekside Hotel, Dubai

Espana Lounge Bar @ Jumeirah Creekside Hotel, Dubai

Espana Lounge Bar @ Jumeirah Creekside Hotel, Dubai

RMD Wall panels

Wall Panels : Canvass Un-Limited

A Single Long Panel Curved Surfaces

Give a Modular FinishMake Lumber Beam Structures

Change the Shape and Forms

Installation : Cut & Paste Technology ,

Substrate : Block & Plastered wall, Gypsum, Glass, MDF, Cement board

Size : Standard 8’ x 4 ‘ , Customised Length can be provided

Thickness: 4.8 mm +/- 10 %

Weight : 3 Kg +/- 10 %

Designs : 200 Designs in Stock & 1000 + on call ag. Orders

Wooden / Metal / Textile / Leather / Fashion / Unicolor

Saving : Time , Labour , Material

Cladding : 1000 Sq.Feet / Day by 1 carpenter & 2 Helpers

Labour Cost : @ 100,000 INR / month for 25000 Sq.Feet ~ 4 INR / Sq.Feet

Surface : Dry at the time of Installation

Life : 10 Years warrantee ag. All MFG.Defects

RMD Wall panels

Pleasant Aesthetics, In-exhaustive Collection

Marble and Stones Wood

Leather Metal

Pleasant Aesthetics, In-exhaustive Collection

Fabric Abstract & Geometric

Digital Unicolor

Pleasant Aesthetics, In-exhaustive Collection

Natural Floral

Near 3D Wild Life

7 meters long single sheetTotal installation time : 45 minutes

Flexible sheet for CURVED surface covering

Flexible sheet for COLUMN covering

Solution for Column covering

Rasasi Perfumes , DIC

Rasasi Perfumes , DIC

Rasasi Perfumes , DIC

Rasasi Perfumes , DIC

Sobha Heartland School, Dubai

Sobha Heartland School, Dubai

Our Universe Of Customers and Projects

OthersAmerican School, KuwaitHeartland School, Dubai

Hospital, PakistanHospital, Sudan

Our Universe Of Customers and Projects

HotelsHilton, Abu DhabiLe Meridian, Dubai

Regent Palace, DubaiHoward Johnson, Dubai

Regent Palace Hotel Project - Dubai : A Typical Case Study

49

No. of Rooms : 18Scope of Application : Wall cladding to 1 feature wall & ½ Window WallScope of Work : Removal of old Wall Paper & Pasting RMD BoardsArea : ~ 320 Sq.Mtr./ 108 BoardsApplicator team : 2 Carpenters + 8 HelpersTotal Project Time : 9 am to 6 pm

No Pollution of any kind ( Dust , Noise , smell ) : No disturbance in running other rooms

Recent Projects

Arab Open University, Kuwait

Biggest stand in Big 5 Dubai Exhibition in 2016

Tested and certified by world’s leading agencies

Tested And Certified By Leading Agencies

Property Standard of Testing Units Value

Tensile Strength at Yield ASTM D 638 MPa 6

Flexural Strength ASTM D 790 MPa 9

Flexural Modulus ASTM D 790 MPa 650

Compressive Strength ASTM D 695 MPa 605

Product Performance Standard No. / Testing Value

Long Duration Climate Test* 60º C - 7 Weeks Unchanged

Tropical Test* 70º C - 5 Weeks / ~ 100% Humidity Unchanged

Ascending Heat Test* 2 Hrs at 70º C; 1 Hr 80º,90º,100ºC each Unchanged

Dry Heat Test* DIN 68861/7 Class 7C (100ºC)

Wet Heat Test* DIN 68861/8 Class 7C (100ºC)

Abrasion Test* DIN 68861/2 (Taber CS 10) 400 Revolutions

Scratching Test* DIN 68861/4, Diamond Needle Class 4E (0. 9N)

Chemical Resistance Test* DIN 68861/1 Class 1 C

Tested And Certified By Leading Agencies

Product Performance Standard No. / Testing Value

Light Fastness Test* ISO 4892-2, DIN EN 105 B 02 Class 7 (>4500 Hrs)

Noise reduction Coefficient (NRC)** ISO 354: 1985 0.3

Test for Fungi, Microorganisms# ISO 846-A Zero Growth

Fire resistance@ ASTM E84 Class B

*Tests conducted at Reputed German Testing facility on 5.1mm sheet

** Tests conducted at National Physical Laboratory, New Delhi, India on 5.1 mm sheet

#Tests conducted at Reputed Testing facility at Dubai on 5.1mm sheet

@ Certified by Dubai Civil Defense, DCD General Directorate, Govt. of UAE, Ministry of interior based on Tests at Dubai and USA by leading Global agency

Joining Solutions

Use for round corner look

Provides round corners and continuity

Used for Edges

Can be used at Edges or in-between

Specially developed

Used for Joints in-between

Used for corners

Used for termination of surfaces

Round Corner Profile

Edge Profile Spacer Profile L Profile

Besides multiple options of Profile Joints; seamless flush joints also possible Note: False Ceiling requires only a Clip on conventional Grid suspension

Easy Installation

56Company Confidential

Step 1: Preparation of Wall Surface

Step 2: Application of Adhesives

Step 3: Mounting of Wall Panel

Step 4: Application of Pressure

Wall Panels

Engineered for Quick and Easy

Installations

Thickness: 3 – 14 mmLength : Customizable

Installation Requires Minimum Tools

High end PU Adhesive from Henkel Germany Suitable even for Ceramic and Glass surfaces

Cement Based Adhesive

Suitable for Block, Plastered, Wood walls

Adhesive mixer

RPM not more than 400

Trowels for PU based glue and Cement base

Applications in Easy Strokes

Trimmer for making Groove and Slots

Fast process; Commonly available

Cutting Knife

Easy Cutting

Hand Planer

For preparing the surfaces for Joints

Used post installation of sheet

Removes the bubbles and Gaps

Adhesive Adhesive

Wall RollerTrimmer

Adhesive Mixer Applicators

PlanerKnife

No chipping, dust free, Noise free installation with No Wastage

RMD Boards..

A Hypothetical example :

Construction & Decoration Of

1000 Sq. Feet Wall

…by using RMD BOARD Solutions!

Hypothesis : 1000 SQ.Feet Wall by conventional way

2nd Day Plastering3rd & 4th Day Curing5th & 6th Day Stucco / POP7th & 8th Day Sanding

Wall is ready for decoration..!Wallpaper 1 - 2 DaysPainting 2 - 3 DaysPaneling 7 - 8 Days

Wall Ready for Delivery

2 Workers Working : From 9 am till 6 pm

1st Day Block wall preparation

1st Day : Block wall preparation

+2nd Day : Pasting 33 Sheets ( 3 SQM/sheet )

Each Sheet in ~max 15 min = Approx 8 Hrs.

=Wall ready for the delivery on 2nd Day..!

Working with RMD Board…

MaterialPlaster

POP / Stucco

Water

Consumables needed for Surface preparation

Significant Savings

Time More than 50 % of time

Labour Daily Wages

Scarcity of skilled manpower too..

Biggest Gain : Time Value of Money

• Size :

• 600 mm x 600 mm

• 600mm x 1200 mm

• Customised sizes can be developed

• Thickness : 4 mm +/- 10 %

• Excellent Aesthetic value

• 100% water resistant

• Low thermal conductivity

• Suitable for electrical fittings

• Excellent Sound absorption

• No Sagging

• No Bacterial growth.

• Easy fixing

• Higher Salvage value

False Ceiling – Key Benefits

Major advantages..

• Very light weight – 1/7th of the weight of existing Gypsum tile.

• Lower weight suspension grid system can be devise – which will reduce the cost of overall system significantly.

• Multiple laminations designs and custom made colour can be offered – very wide range for choice

RMD board False Ceiling Suspension System

RMD False Ceiling board

Fixing of RMD Board False CeilingWith Hold down clip

Hold Down Clip

Innovative designs of Grid suspension prevents lifting of RMD tile lifting due to vacuum created while opening / closing doors & ensures no visible gaps

Uniquely Engineered, Easy Ways Of Installations

False Ceilings

Easy Installations and Easy

Experimentations

Thickness: 3 mmStandard Length X Width : 60 X 60 mmOr Any Panel of desired dimensions

Fortune Hotel, Dubai

Other applications inBuilding & Construction Sector

Exhibition Partition

RMD Board for Sliding Wall Partitions

• Very Light weight

• Finger touch movement possible with suitable frames

• Can be effectively used as partitions in Suites, Banquet halls, Exhibitions etc.

RMD Drywall Partitions

RMD Drywall Partitions

Basic Construction:

• 3.2 mm RMD board to be pasted on GI frame structure of chosen thickness on both sides

• Inside of partition is filled with XPS / Styrofoam for required Acoustic and Thermal insulation properties.

X-Section of RMD Dry Wall

GI Frame

XPS or Styrofoam

RMD Board, 3,2 mm thick

Adhesive

Benefits of RMD Drywall Partitions

• Excellent Noise Reduction Coefficient (NRC)

• Fantastic range of designs to choose from.

• 100% Water Proof

• Termite Resistant

• Very high Abrasion Resistance

• Excellent Impact Strength

• Maintenance free

• Faster installation – Reduction in labour and Saving in time

• Fire retardant ( Optional )

Comparison : RMD Board V/s Gypsum

RMD boards : Light weight with better strength to weight ratio &negligible water absorption

Performance Test UOM Gypsum RMD board

Mechanical Properties

Moisture Absorption % ~ 10 - 35 < 0.03

Effect of Mositure % Thickness swell No Effect

Noise Reduction Co-efficient 0.25 - 0.30 0.05

Anti Microbial � �Impact Strength Ft· Lb/ in2

Compressive Strength MPa 2.4 - 2.75 6.5

Thermal Conductivity W/m.K 0.17 0.07

Weight kg / m² 6 - 20 1.8

Preparing GI Support structure for Partition Wall

Partition Wall Is Ready for use

Partition Wall is Ready for use

Partition Wall Is Ready for useFinal Look of Partition Wall

Standard Dimension - LXW (mm) : 2440 X 1220

Thickness (mm) : 2.2 to 5

GSM (gm) : 300 to 1000

• Any transportable cutomised length is possible

• Bare RMD board with Natural translucent colour

• Can be directly supply to Distributors, Traders and Big end users

RMD Floor Protection Boards

The Metal Pointers – causes damage to the precious marble, granite and tiles

Conventional Tile Protection Systems

RMD Floor Protector board

RMD Floor Protection board

Fixed Partitions for Office & Factory

• Can be made available in various size and different laminates with most suitable fixing accessories

Modular Office Work Stations

Toilet Partitions

Toilet Partitions

Toilet Doors and Partitions

Urinal Partitions

Urinal Partitions

RMD Doors

RMD Doors

Adhesives for RMD BoardsProduct Name Product type Company Pack size Application Product Image

THOMSIT – R710

2-component PU Adhesive Henkel 4 kg and 10

kgFor Dry and Wet-all areas

Pattex PL 200

Silane curing Flextec Polymer construction adhesives , high immediate tack

Henkel 300 ml Cartridge

For Dry Wall Partition

XB 150 Cemantatious Adhesive Eurobuild 20 kg / bag For Dry & Wet -

all areas

Together we can & we will

make a difference…

Let�s join hands to support innovation and nurture goods ideas.

…so many ideasneed your support & guidance to make it

happen

The Strength : Hrithik for RMD Brand

ExcellenceCustomer Focus

FairnessRussia - Proposed

Turkey - ProposedChina - Proposed

RMD Boards the Brand

synonymous with the

Power House of

Strength & Innovation

the Only

HRITHIK

ROSHAN

The INNOVATION.. !Needs your Support

RMD BoardOffers

A Perfect Combination of Beauty + strength = Savings

RMD Board Offers