What is “3-D Ripple Print”?3-dimensional transparent print or Special

embossed color print on cellulosic goods

Exclusive recipe by “Permafin-PN..”

systemPrimarily for cellulosic goodsUnique and exceptional printFully creative finish

1. Additives for Transparent & Ripple PrintPermafin-PB-37, Permafin-PN-01Permafin-RPP, Permafin-PN-119Crosslinker-UX, Microderm-SKCAquarepel-XC/Conc, Aquarepel-EX-001MTriplex-PTF, Altraplex-AW

2. Recipe for Transparent and Ripple printi) Roller Print [mangle padding] – for woven

ii) Rotary print – for woven

iii) Rotary print – for knit

Specification Additives

Item Composition Appearance pH [10%]

Ionicity Solubility [in water]

Permafin-PN-01

Permafin-PN-37

Permafin-PN-119

Special urethane resins for ripple print [soft handle]

Colorless to slightly yellowish viscous liquid

7 ± 1

5.5 ± 1

5.5 ± 1

Nonion

Nonion

Nonion

Easily soluble at cold or warm water

Permafin-RPP Special urethane resins for ripple print [stiff handle]

Light beige

viscous liquid

5 ± 1 Nonion Easily soluble at cold or warm water

Crosslinker-UX Catalyst of Urethane resins

Light beige

viscous liquid

5 ± 1 Nonion Easily soluble

Aquarepel-FC-1500

Fluoro polyacrylate White to yellowish liquid 2.5 ± 0.5

Cation Easily soluble

Aquarepel-EX-001M

Blocked polyisocyanate

Light beige

Dispersion

7 ± 1 Nonion Easily soluble

Altraplex- AW Organic phosphoric compound

Light yellowish clear liquid 9 ± 1 Weak anion

Easily soluble

Microderm-SKC

Special silicone copolymer

Milky white liquid 4.5 ± 1 Nonion Easily soluble

Triplex-PTF Special polymer Off white liquid > 5 Anion Soluble

Permafin- PN-37Permafin- PN-01Permafin- PN 119Urethane resin for transparent print and color printExcellent alkaline stability. No hydrolysis problemPrevent staining of dyes in washing processGood transparency and vivid print on goodsFilm with soft handle [PN 119*>PN 37 > PN-01]Permafin- PN 119 provides more volume

Additives

Permafin- RPP

Urethane resin for transparent print and color printExcellent alkaline stability. No hydrolysis problemPrevent staining of dyes in washing processGood transparency and vivid print on goodsGood volume feeling to the clothes and bed clothesFilm with medium to stiff handle

Additives

CROSSLINKER-UXCatalyst for urethane resinPromotes activation and fixation of Urethane resinApplying quantity: 5 ~ 10% of urethane resin applied

MICRODERM-SKCSpecific softener for Ripple print [only for knit]Form film by itself without any bad influence on printApplying quantity: 30 ~ 50 g/l

Additives

AQUAREPEL-FC 1500Film protector for color Ripple print [by reactive dyes]

Prevent color change/lost of dyes under strong alkalis

Aquarepel-EX-001MCatalyst of FC 1500 in color ripple print

Prevent drape property of fabrics

Applying quantity: ca. 20% of FC 1500 applied

Additives

Altraplex- AWUsed in washing process after alkali ageing of Ripple PrintPrevent yellowing of transparent print film after dryingWhen neutralizing by Acid, used jointly in a bathApplying quantity: 3~5 g/l

AdditivesTriplex-PTFThickener for viscosity controlApplying quantity: x% [for viscosity ca. 5000 cps

1. Roller Print for WovenRecipe:Permafin--RPP : 95%Crosslinker-UX : 5%Thickener [Triplex-PTF] : x% [ca. 5000 cps of viscosity]** If softer handle is required, increase the quantity of Permafin- PN-01 [or PN 37, PN 119, Microderm-SKC] while reducing the quantity of Permafin--RPPPrint condition: Mangle padding [Roller Print] Setting [190ºC x 100 yd/mm] Alkali treatment [98% NaOH 32º ~ 35º Be] Rinsing & neutralizing Tentering [170ºC x 70 yd/min]

Application

2. Rotary print for wovenRecipe:Permafin- PN-01 : 70% [or Permafin- PN 37, PN 119]Permafin- RPP : 25%Crosslinker-UX : 5%Thickener [Triplex-PTF] : X% [ca. 5000 cps of viscosity]

Print condition:Printing Curing [180ºC x 2 min] Padding [98% NaOH 320 ~ 350 g/l] Rinsing & neutralizing Tentering [180ºC x 90 sec]

Application

3. Rotary print for knit:Recipe:Permafin- PN-01 : 55% [or Permafin- PN 37, PN 119]Permafin- RPP : 25%Crosslinker-UX : 5%Microderm- SKC : 15%Thickener [Triplex-PTF] : X% [ca. 5000 cps for viscosity]

Print condition:Pre-treatment Printing Curing [180ºC x 2 min] Padding [98% NaOH, 320~350 g/l] Rinsing & neutralizing tentering [180ºC x 1 min 30 sec]

Application