West Bengal State Council of Technical Educationwebscte.org/PDF/Structure_3-4 sem_1.pdf · West Bengal State Council of Technical Education (A Statutory Body under West Bengal Act

West Bengal State Council of Technical Education (A Statutory Body under West Bengal Act XXI of 1995)

Kolkata Karigori Bhavan, 2nd Floor, 110 S. N. Banerjee Road, Kolkata - 700 013. Telephone: (033)2227-7592 extn.19, E-mail: [email protected], Website: http://www.webscte.org/

Memo No.: 26A-SC(T)E Dated: 10.01.2014

NOTICE

This is for information to all concern that, Council has successfully revamp the syllabi of 1st year

for Diploma courses offered through different Polytechnics affiliated to the Council. In continuation of

the revamping procedure, various Syllabus Sub-Committee/coordinating Institutes for syllabus

modification have exerted their full effort to frame out the curriculum structure and syllabus. The

proposed draft curriculum structures have been developed in consideration with the model syllabus

uploaded by AICTE on the website http://www.aicte-india.org/mdiploma.htm and after active

consultation with eminent University and industry experts.

Suggestions and comments are invited from the respective subject teacher of different

Polytechnics and from other stake holders regarding the proposed curriculum structure/ syllabus

with the aim to implement new revised syllabi from the next academic session.

The suggestion should be contained the branch name and relevant title mentioning it position on

the particular structure with his/her name and phone number. The suggestions to be submitted to e-mail

address “[email protected]” within 6th

February, 2014. Constructive suggestion and

comments will be actively considered by the syllabus committee for finalization of curriculum structure/

syllabus for further development of detailed syllabi essential for the enhancement of the quality of

Diploma education in the state.

SECRETARY, WBSCTE

1

West Bengal State Council of Technical Education (A Statutory Body under West Bengal Act XXI of 1995)

Kolkata Karigori Bhavan, 2nd Floor, 110 S. N. Banerjee Road, Kolkata - 700 013. Telephone: (033)2227-7592 extn.19, E-mail: [email protected], Website: http://www.webscte.org/

Curriculum Structure

Sl. No. Subject Name Page No.

1. Food Processing Technology 2

2. Mine Surveying 4

3. Mining Engineering 4

4. Information Technology 6

5. Packaging Technology 8

6. Footwear Technology 10

7. Leather Goods Technology 10

8. Metallurgical Engineering 10

9. Chemical Engineering 10

10. Agricultural Engineering 10

11. Mechanical Engineering (Production) 10

12. Computer Software Technology 11

13. Medical Laboratory Technology 13

14. Multi Media Technology 15

15. Photography 15

16. Printing Technology 15

17. Survey Engineering 15

18. Modern Office Practice & Management 16

19. Architecture 19

20. Civil Engineering 20

21. Mechanical Engineering 24

22. Electrical Engineering 26

23. Computer Science & Technology 30

24. Electronics & Telecommunication Engineering 32

25. Electronics & Instrumentation Engineering 34

26. Automobile Engineering 36

2

1.

PROPOSED CURRICULAR STRUTURE FOR

PART-II (2nD YEAR) OF THE DIPLOMA COURSES In EnGInEERInG AnD TECHnOLOGY

Food Processing Technology

3

PROPOSED CURRICULAR STRUTURE FOR

PART-III (3RD YEAR) OF THE DIPLOMA COURSES In EnGInEERInG AnD TECHnOLOGY

4

2.

Yet to be submitted by the Coordinating Institute (Asansol Polytechnic)

Mine Surveying

3.

PROPOSED CURRICULAR STRUCTURE FOR

PART – II (2nD YEAR) OF THE FULL--TIME DIPLOMA COURSES In EnGInEERInG & TECHnOLOGY

Mining Engineering

SEMESTER: THIRD BRANCH: MINING ENGINEERING SR. NO

SUBJECT

CREDITS

PERIODS EVALUATION SCHEME L

TU

PR

INTERNAL SCHEME ESE

PR

Total Marks TA CT Total

1. INTRODUCTION TO MINING 5 4 1 10 20 30 70 100 2. EXPLOSIVES, BLASTING

PRACTICES & GAS DETECTION 5 4 1 10 20 30 70 100 3. UNDERGROUND COAL

MINING METHODS & FUEL TECHNOLOGY

4 4 10 20 30 70 100

4. MINING GAS,BORING & BLASTING LAB 3 5 100 100

5. COMPUTER AIDED DESIGN & DRAFTING LAB 2 3 50 50

6. PROFESSIONAL PRACTICES – I 1 2 50 50 7. INDUSTRIAL TRAINING* 5 9 300 300

Total: 25 12 2 19 30 60 90 210 500 800 STUDENT CONTACT HOURS PER WEEK:33 hrs Theory and Practical Period of 60 Minutes each. L- Lecture, TU- Tutorials, PR- Practical, TA- Teachers Assessment, CT- Class Test, ESE- End Semester Exam. * Students will undergo 16 weeks of Practical training during this semester. Weightage on PR & Credit points is allotted on the basis of 16 weeks of Practical training.

SEMESTER: FOURTH BRANCH: MINING ENGINEERING SR. NO

SUBJECT

CREDITS


TU

PR

INTERNAL SCHEME

ESE

PR

Total Marks

TA CT Total 1. SPECIAL UNDERGROUND

METHODS, ROCK MECHANICS & SUPPORTS

4 4 10 20 30 70 100

2. SURFACE MINING 4 4 10 20 30 70 100 3. UNDERGROUND

METALLIFEROUS MINING & TUNELLING

4 3 1 10 20 30 70 100

4. MINING HAZARDS 5 5 10 20 30 70 100 5. MINING GEOLOGY 5 2 2 4 10 20 30 70 100 200 6. MINE SAFETY LAB 2 4 100 100 7. MINE METHODS & SUPPORT

LAB 2 4 100 100 Total: 26 18 3 12 50 100 150 350 300 800

STUDENT CONTACT HOURS PER WEEK:33 hrs Theory and Practical Period of 60 Minutes each. L- Lecture, TU- Tutorials, PR- Practical, TA- Teachers Assessment, CT- Class Test, ESE- End Semester Exam.

5

ROPOSED CURRICULAR STRUCTURE FOR

PART – III (3RD YEAR) OF THE FULL--TIME DIPLOMA COURSES In EnGInEERInG & TECHnOLOGY

SEMESTER: FIFTH BRANCH: MINING ENGINEERING SR. NO

SUBJECT

CREDITS


TU

PR

INTERNAL SCHEME ESE

PR


1. MINE MANAGEMENT, LEGISLATION & GENERAL

SAFETY - I 5 5 10 20 30 70 100

2. MINE VENTILATION - I 5 3 1 2 5 10 15 35 50 100 3. MINE SURVEYING - I 6 4 1 3 10 20 30 70 100 200 4. ELECTRICAL ENGINEERING &

MECHANICAL ENGINEERING 5 3 1 3 10 20 30 70 100 200 5. INDUSTRIAL TRAINING * 4 7 300 300

Total: 25 15 3 15 35 70 105 245 550 900 STUDENT CONTACT HOURS PER WEEK:33 hrs Theory and Practical Period of 60 Minutes each. L- Lecture, TU- Tutorials, PR- Practical, TA- Teachers Assessment, CT- Class Test, ESE- End Semester Exam. * Students will undergo 16 weeks of Practical training during this semester. Weightage on PR & Credit points is allotted on the basis of 16 weeks of Practical training.

SEMESTER: SIXTH BRANCH: MINING ENGINEERING SR. NO

SUBJECT

CREDITS


TU

PR

INTERNAL SCHEME ESE

PR


1. MINE MANAGEMENT, LEGISLATION & GENERAL

SAFETY - II 4 4 10 20 30 70 100

2. MINING MACHINERY - I 5 4 2 10 20 30 70 50 150 3. MINING MACHINERY - II 5 3 1 2 10 20 30 70 50 150 4. MINE VENTILATION - II 4 3 2 5 10 15 35 50 100 5. MINE SURVEYING - II 5 3 3 10 20 30 70 100 200 6. PROJECT WORK & SEMINAR 2 4 100 100 7. GRAND VIVA 1 2 100 100

Total: 26 17 1 15 45 90 135 315 450 900 STUDENT CONTACT HOURS PER WEEK:33 hrs Theory and Practical Period of 60 Minutes each. L- Lecture, TU- Tutorials, PR- Practical, TA- Teachers Assessment, CT- Class Test, ESE- End Semester Exam.

6

4.

Information Technology


PART – 2 (2nD YEAR) OF THE FULL- TIME DIPLOMA COURSE In InFORMATIOn TECHnOLOGY

SEMISTER: THIRD BRANCH: IT

SL.No. SUBJECT CREDITS

PERIODS Evaluation Scheme

L TU PR INTERNAL SCHEME ESE PR TOTAL

MARKS TA CT Total

1 Discrete Mathematics 3 3 10 20 30 70 100

2 C Programming 3+2 3 4 10 20 30 70 100 200

3 Digital Techniques 3+1 3 2 10 20 30 70 50 150

4 Data Structure 3+2 3 3 10 20 30 70 50 150

5 Computer System and Architecture 3 3 10 20 30 70 100

6 Electronics Device & Circuits 3+1 3 2 10 20 30 70 50 150

7 Professional Practice-I (PC Maintenance) 1 2 50 50

Total 25 18 13 60 120 180 420 300 900

STUDENT CONTACT HOURS PER WEEK: 31 HRS.

Theory and Practical Periods of 60 minutes each.

L-Lecture, TU-Tutorials, PR-Practical, TA-Teachers Assessment, CT-Class Test, ESE-End Semester Examination.

SEMISTER: FORTH BRANCH: IT




MARKS TA CT Total

1 Microprocessor & Programming 3+1 3 2 10 20 30 70 50 150 2 Computer Network 3+1 3 2 10 20 30 70 50 150

3 Relational Data Base Management System 3+2 3 3 10 20 30 70 100 200

4 *Object Oriented Programming using C++

3+3 3 4 10 20 30 70 100 200

5 Management Infotmation System 3 3 10 20 30 70 100 6 Development of Life Skills-II 1+1 1 2 50 50

7 Professional Practice-II ( Web Page Development) 1 2 50 50

Total 25 16 15 50 100 150 350 400 900 STUDENT CONTACT HOURS PER WEEK: 31 HRS. Theory and Practical Periods of 60 minutes each. L-Lecture, TU-Tutorials, PR-Practical, TA-Teachers Assessment, CT-Class Test, ESE-End Semester Examination. * Visual Basic will be included within the Practical Class of Object Oriented Programming along with C++

7


PART – 3 (3RD YEAR) OF THE FULL- TIME DIPLOMA COURSE In InFORMATIOn TECHnOLOGY

SEMISTER: FIFTH BRANCH: IT




MARKS TA CT Total 1 Software Engineering 3 3 10 20 30 70 100 2 Java Programming 3+2 3 3 10 20 30 70 100 200 3 Operating System 3+1 3 2 10 20 30 70 50 150 4 Principle of Communication 3+1 3 2 10 20 30 70 50 150

5

ELECTIVE- I (Any One) Multimedia and Animation Technique 3+1 3 2 10 20 30 70 50 150

Windows Programming 3+1 3 2 10 20 30 70 50 150 Network Management and Administration 3+1 3 2 10 20 30 70 50 150

6 Project (Phase-I) 4

7 Professional Practice-III (Advance Web Technology) 2 3 50 50

Total 22 15 16 50 100 150 350 300 800 STUDENT CONTACT HOURS PER WEEK: 31 HRS. Theory and Practical Periods of 60 minutes each. L-Lecture, TU-Tutorials, PR-Practical, TA-Teachers Assessment, CT-Class Test, ESE-End Semester Examination.

SEMISTER: SIXTH BRANCH: IT




MARKS TA CT Total 1 Industrial Management 3 3 10 20 30 70 100 2 Advanced Java Programming 3+2 3 4 10 20 30 70 100 200

3 Systems Programming & Compiler Design 3+2 3 3 10 20 30 70 50 150

4

ELECTIVE – II (Any One) Digital Image Processing 3+1 3 3 10 20 30 70 50 150 Numerical Methods 3+1 3 3 10 20 30 70 50 150 Software Testing 3+1 3 3 10 20 30 70 50 150

5 Project (Phase-II) 6 6 100 100

6 Professional Practice-IV(Seminar Work) 2 3 50 50

7 General Viva Voce 3 50 50 Total 28 12 19 40 80 120 280 400 800 STUDENT CONTACT HOURS PER WEEK: 31 HRS. Theory and Practical Periods of 60 minutes each. L-Lecture, TU-Tutorials, PR-Practical, TA-Teachers Assessment, CT-Class Test, ESE-End Semester Examination.

8

55.. PACKAGING TECHNOLOGY


PART – II (2nD YEAR) OF THE FULL-TIME DIPLOMA COURSES In EnGInEERInG & TECHnOLOGY

TEACHING AND EXAMINATION SCHEME FOR DIPLOMA IN ENGINEERING COURSES COURSE NAME: FULL TIME DIPLOMA IN PACKAGING TECHNOLOGY DURATION OF COURSE: 6 SEMESTERS SEMESTER: THIRD BRANCH: PACKAGING TECHNOLOGY

SR. NO. SUBJECT CREDITS

PERIODS EVALUATION SCHEME

L TU PR INTERNAL SCHEME

ESE PR Total Marks TA CT Total

1 Introduction to Packaging Technology. 5 4 - 2 10 20 30 70 50 150

2 Cellulose and Fiber Technology. 5 4 - 2 10 20 30 70 100 200 3 Hazards in Packaging 4 3 - 2 5 10 15 35 100 150 4 Basic Electronics 4 3 2 10 20 30 70 50 150

5 Introduction to Thermodynamics & Heat Transfer. 5 3 1 2 10 20 30 70 50 150

6 Professional Practice-I 2 1 - 2 - - - - 50 50 Total: 25 18 1 12 50 100 135 315 400 850


TEACHING AND EXAMINATION SCHEME FOR DIPLOMA IN ENGINEERING COURSES COURSE NAME: FULL TIME DIPLOMA IN PACKAGING TECHNOLOGY DURATION OF COURSE: 6 SEMESTERS SEMESTER: FOURTH BRANCH: PACKAGING TECHNOLOGY

SR. NO. SUBJECT CREDIT

S


L TU PR INTERNAL SCHEME ESE PR Total

Marks TA CT Total

1 Plastic Technology 6 4 1 2 10 20 30 70 100 200 2 Metal Packaging 5 4 2 10 20 30 70 50 150 3 Glass Packaging 5 4 - 2 10 20 30 70 50 150

4 Ancillary material 3 3 - 10 20 30 70 - 100

5 Pharmaceutical packaging 2 2 5 10 15 35 50 6 Development of Life Skill-II 2 1 - 2 - - - - 50 50 7 Professional Practice-II 2 1 - 2 - - - - 50 50

Total: 25 19 1 10 45 90 135 315 300 750 STUDENT CONTACT HOURS PER WEEK:33 hrs

Theory and Practical Period of 60 Minutes each. L- Lecture, TU- Tutorials, PR- Practical, TA- Teachers Assessment, CT- Class Test, ESE- End Semester Exam.

9


PART – III (3RD YEAR) OF THE FULL-TIME DIPLOMA COURSES In EnGInEERInG & TECHnOLOGY

TEACHING AND EXAMINATION SCHEME FOR DIPLOMA IN ENGINEERING COURSES COURSE NAME: FULL TIME DIPLOMA IN PACKAGING TECHNOLOGY DURATION OF COURSE: 6 SEMESTERS SEMESTER: FIFTH BRANCH: PACKAGING TECHNOLOGY



L TU PR INTERNAL SCHEME

ESE PR Total Marks TA CT Total

1 Food and Beverages Packaging 5 3 3 10 20 30 70 100 200

2 Packaging Machinery and Equipment 5 3 1 2 10 20 30 70 100 200

3 Packaging Economics & Legislation 3 3 - - 10 20 30 70 - 100 4 Package Printing Technology 5 3 - 3 10 20 30 70 100 200

5 Principle of Refrigeration and Cold Storage. 3 2 - 2 5 10 15 35 50 100

6 Industrial Project & Entrepreneurship Development 2 1 - 2 - - - - 50 50

7 Professional Practice-III 2 - - 3 - - - - 50 50 Total: 25 15 1 15 45 90 135 315 450 900


TEACHING AND EXAMINATION SCHEME FOR DIPLOMA IN ENGINEERING COURSES COURSE NAME: FULL TIME DIPLOMA IN PACKAGING TECHNOLOGY DURATION OF COURSE: 6SEMESTERS SEMESTER: SIXTH BRANCH: : PACKAGING TECHNOLOGY



L TU PR INTERNAL SCHEME ESE PR Total

Marks TA CT Total

1 Industrial Management 3 3 - - 10 20 30 70 - 100 2 Package Testing & Evaluation. 5 3 4 10 20 30 70 100 150 3 Package Design 4 3 - 2 10 20 30 70 50 200

4

Elective-II ( Select any one) I) Security Printing. II) Application of Computer in

Packaging. III) Coding System for Packaging.

5 3 - 3 10 20 30 70 100 200

6 Industrial Project 3 - - 6 - - - - 100 100

7 Professional Practice-IV 2 1 - 2 - - - - 50 50

8 General Viva voce 3 - - - - - - - 100 100 Total: 25 13 - 18 40 80 120 280 500 900


10

6. Footwear Technology:

Yet to be submitted by the Coordinating Institute (Central Footwear Training Centre)

7. Leather Goods Technology:

Yet to be submitted by the Coordinating Institute (Central Footwear Training Centre)

8. Metallurgical Engineering:

Yet to be submitted by the Coordinating Institute (Engineering Institute for Junior Executives)

9. Chemical Engineering:

Yet to be submitted by the Coordinating Institute (Hooghly Institute of Technology)

10. Agricultural Engineering:

Yet to be submitted by the Coordinating Institute (Murshidabad Institute of Technology)

11. Mechanical Engineering (Production):

Yet to be submitted by the Coordinating Institute (Nazrul Centenary Polytechnic)

11

12. Computer Software Technology:


PART – 2 (2nD YEAR) OF THE FULL- TIME DIPLOMA COURSE In EnGInEERInG AnD TECHnOLOGY

12


PART – 3 (3RD YEAR) OF THE FULL- TIME DIPLOMA COURSE In EnGInEERInG AnD TECHnOLOGY

13

13. Medical Laboratory Technology:

PROPOSED CURRICULUM STRUCTURE FOR

PART-II (2nD YEAR) OF THE FULL-TIME DIPLOMA In MEDICAL LABORATORY TECHnOLOGY

14


PART-III (3RD YEAR) OF THE FULL-TIME DIPLOMA In MEDICAL LABORATORY TECHnOLOGY

15


PART-II & III FULL-TIME DIPLOMA In MEDICAL LABORATORY TECHnOLOGY

14. Multi Media Technology:

Yet to be submitted by the Coordinating Institute (The Regional Institute of Printing Technology)

15. Photography:


16. Printing Technology:


17. Survey Engineering:

Yet to be submitted by the Coordinating Institute (West Bengal Survey Institute)

16

18. Modern Office Practice & Management:


PART – I (1ST YEAR) OF THE FULL-TIME DIPLOMA COURSES In MODERn OFFICE PRACTICE & MAnAGEMEnT

TEACHING AND EXAMINATION SCHEME FOR DIPLOMA IN MODERN OFFICE PRACTICE & MANAGEMENT

DURATION OF COURSE: 6 SEMESTERS SEMESTER: SECOND SR

NO. SUBJECT CREDITS PERIODS EVALUATION SCHEME

L TU PR INTERNAL SCHEME ESE PR

TOTAL MARKS TA CT TOTAL

1 Business Economics & Accountancy 3 4 - - 10 20 30 70 - 100 2 Principles of Management - II 3 3 - - 10 20 30 70 - 100 3 Business Statistics - I 4 4 - - 10 20 30 70 - 100 4 Conversational English - I 3 3 - 10 20 30 70 - 100 5 Organization & Methods 3 3 - - 10 20 30 70 - 100 6 Secretarial Practice 2 2 - - 5 10 15 35 50 7 Stenography & Key Board Practice Shop 2 - - 5 - - - - 100 100 8 Conversational English – I Lab 2 - 5 - - - - 100 100 7 Development of Life Skill - I 3 1 - 3 - - - - 50 50

TOTAL 25 20 - 13 55 110 165 385 250 800 STUDENT CONTACT HOURS PER WEEK: 33 hrs Theory and Practical Period of 60 Minutes each. L- Lecture, TU- Tutorials, PR- Practical, TA- Teachers Assessment, CT- Class Test, ESE- End Semester Exam.

17


PART – II (2nD YEAR) OF THE FULL-TIME DIPLOMA COURSES In MODERn OFFICE PRACTICE & MAnAGEMEnT

TEACHING AND EXAMINATION SCHEME FOR DIPLOMA IN MODERN OFFICE PRACTICE & MANAGEMENT DURATION OF COURSE: 6 SEMESTERS SEMESTER: THIRD SR




1 Environmental Engineering 3 3 - - 10 20 30 70 - 100 2 Business Statistics – II 3 3 1 - 10 20 30 70 - 100 3 Conversational English - II 3 3 - - 10 20 30 70 - 100 4 Advanced Accountancy 3 3 - 10 20 30 70 - 100 5 Rural Development & Management 3 3 10 20 30 70 - 100 6 Conversational English – II - Lab 3 - - 5 - - - - 100 100 7 Computerized Financial Accounting Lab - I 3 - - 6 - - - - 100 100 8 C Programming 3 1 5 - - - - 100 100

TOTAL 24 16 1 16 50 100 150 350 300 800 STUDENT CONTACT HOURS PER WEEK: 33 hrs Theory and Practical Period of 60 Minutes each. L- Lecture, TU- Tutorials, PR- Practical, TA- Teachers Assessment, CT- Class Test, ESE- End Semester Exam.

TEACHING AND EXAMINATION SCHEME FOR DIPLOMA IN MODERN OFFICE PRACTICE & MANAGEMENT DURATION OF COURSE: 6 SEMESTERS SEMESTER: FOURTH SR




1 Operations Research 4 4 1 - 10 20 30 70 - 100 2 Principles of Auditing 3 3 - - 10 20 30 70 - 100 3 Entrepreneurship Development 3 3 - 10 20 30 70 - 100 4 Principles of Banking 3 3 - - 10 20 30 70 - 100 5 Office Equipment &Communication System 3 3 - - 10 20 30 70 - 100 6 Financial Management 3 3 1 - 10 20 30 70 - 100 7 Computerized Financial Accounting Lab – II 3 - - 6 - - - - 100 100 8 Office Equipment &Communication System (Lab) 1 - - 2 - - - - 50 50 9 Development of Life Skill - II 3 1 - 3 - - - - 50 50


18


PART – III (3RD YEAR) OF THE FULL-TIME DIPLOMA COURSES In MODERn OFFICE PRACTICE & MAnAGEMEnT

TEACHING AND EXAMINATION SCHEME FOR DIPLOMA IN MODERN OFFICE PRACTICE & MANAGEMENT DURATION OF COURSE: 6 SEMESTERS SEMESTER: FIFTH

SR NO.

SUBJECT CREDITS PERIODS EVALUATION SCHEME L TU PR INTERNAL SCHEME ESE PR


1 Marketing Management 4 3 1 - 10 20 30 70 - 100 2 Indian Constitution & Contemporary

Economic Problems 3 3 - - 10 20 30 70 - 100

3 Elective – 1. Office Administration – I 2. Record Management Principles I

3 3 - - 10 20 30 70 - 100

4 Company Law 3 3 - - 10 20 30 70 - 100 5 Industrial Training & Project 8 - - 20 - - - - 300 300 6 Seminar & Viva on Industrial Training 3 200 200


TEACHING AND EXAMINATION SCHEME FOR DIPLOMA IN MODERN OFFICE PRACTICE & MANAGEMENT DURATION OF COURSE: 6 SEMESTERS SEMESTER: SIXTH SR




1 Management Information System 3 3 - - 10 20 30 70 - 100 2 Human Resource Management 3 3 - - 10 20 30 70 - 100 3 Total Quality Management 3 3 10 20 30 70 - 100 4 Office & Business Correspondence 3 3 - 10 20 30 70 100 5 Industrial Relations 3 3 - 10 20 30 70 - 100 Elective – 1. Office Administration – II

2. Record Management Principles II 2 2 - - 5 10 15 35 - 50

6 Multimedia Lab 3 - - 6 - - - - 100 100 7 Elective Lab – 1. Office Administration – II

2. Record Management Principles 1 - - 2 - - - - 50 50

8 Project & Seminar on any specific field of Management

3 - - 6 - - - - 100 100

9 General Viva Voce 2 - - - - - - - 100 100 TOTAL 26 17 14 55 110 165 385 350 900

STUDENT CONTACT HOURS PER WEEK: 33 hrs Theory and Practical Period of 60 Minutes each. L- Lecture, TU- Tutorials, PR- Practical, TA- Teachers Assessment, CT- Class Test, ESE- End Semester Exam.

19

19. Architecture:


PART-II (2nD YEAR) OF THE FULL-TIME DIPLOMA COURSES In EnGInEERInG & TECHnOLOGY

20

20. Civil Engineering:

PROPOSED CURRICULUM STRUCTURE FOR PART-II (2nD YEAR) OF THE FULL-TIME DIPLOMA COURSES In EnGInEERInG & TECHnOLOGY

21

22

PROPOSED CURRICULUM STRUCTURE FOR PART-III (3RD YEAR) OF THE FULL-TIME DIPLOMA COURSES In EnGInEERInG & TECHnOLOGY

23

24

21. Mechanical Engineering:

25

26

22. Electrical Engineering



27

28


PART-III (3RD YEAR) OF THE FULL-TIME DIPLOMA COURSES In EnGInEERInG & TECHnOLOGY

29

30

23. Computer Science & Technology

31

32

24. Electronics & Telecommunication Engineering



33

34

25. Electronics & Instrumentation Engineering

35


PART-III (3RD YEAR) OF THE FULL-TIME DIPLOMA COURSES In EnGInEERInG & TECHnOLOGY

36

26. Automobile Engineering

37

Documents

West Bengal State Council of Technical Educationwebscte.org/PDF/Structure_3-4 sem_1.pdf · West Bengal State Council of Technical Education (A Statutory Body under West Bengal Act