Upload
dangtruc
View
230
Download
1
Embed Size (px)
Citation preview
Well Control Simulator for iPad
Example of the Driller’s Method
Surface StackRev: 1.1
1
Well Control Simulator for iPadPortrait x Landscape
1) Use iPad on vertical position for options buttons; 2) Use on landscape position to see the well bore;
3) Tap on ‘Files’ button to set a data file;
2
Well Control Simulator for iPad
4) Tap on ‘Unit System’ button:
Note: Also available on other views
5) Select the ‘Unit System’ option:
Select the Unit System
On MAIN, Select [OPTIONS] -> ‘Unit System’:
3
Well Control Simulator for iPad
8) Tap on ‘Default Surface Stack’ button to load data in RAM memory:
9) For save it with any data files, enter ‘Surface 1’ for example on text box and Tap on ‘Save Data to File’ button.
10) For open any data file, roll up/down the wheel to select a data file by name and Tap on ‘Open File’ button;
Set a Data File
Notes:
- The data that are loaded in the RAM memory are saved to data file named with the content of File Name TextBox.
- When the text “Loaded” is “#”, the Ram Memory is loaded with Default Data.
- Attention for “Replace if exists” option.
- The data file is created in iCloud or Local according to the selected option.
Recommendation
Save your exercise with different filenames at the points of interest for analyzes
11) Attention: When a data file is removed, the data is lost.
4
Well Control Simulator for iPad
12) Tap ‘Well Config’ button on Main View 13) Default Subsea Stack with full features
Set Well Configuration
5
Well Control Simulator for iPad
14) Tap on ‘Mud/Gradients’ button on Well Config View 15) Set Gradients to:
- Absorption Gradient = 14.3 ppg - Fracture Gradient = 14.8 ppg
Set Mud and Gradients
Note: The ‘Power’ for Rheological Model is best to bring mud pump to kill speed on simulator:
16) Rheological model: Selected ‘Bingham’ for this example
6
Well Control Simulator for iPadSet Equipments17) Tap on ‘Equipments’ button on Well Config View About the Surface Circulation Volume:
Surface Circulation Volume = Volume of the flow line, pipes, etc on circulation.
When occur a kick on the drilling, the driller stops the mud pump and the "Surface Circulation Volume" return to tank. The calculation of the real volume of the kick = Static Vol. after shut-in the well - Dynamic Volume on drilling - Surface Circulation Volume.
Example: Static Volume (mud pump stopped) = 500 bbl Drilling with mud pump @ 100 spm => Pit Volume = 470 bbl => Surface Circulation Volume @ 100 spm = 30 bbl - Shut-in the well => pit volume = 510 bbl - Kick Volume = 510 - 470 - 30 = 10 bbl
7
Well Control Simulator for iPadRecord the Pump Pressure @ Kill Rate Speed
Kill Rate Speed = 30 spmKill Flow Rate = 125.5 gpmKill Rate Pump Pressure = 178.8 psi
8
Well Control Simulator for iPadSet the Kick
3) Enter Kick Volume=10 bbl, SIDPP=300 psi and SICP=450 psi
5) Tap on Kick button again to close popup view
2) Select ‘sidpp/sicp’ option;
4) Tap on ‘Set’ button;
Note: The kick volume increases until the well is closed
1) Tap on ‘Kick’ button on Main View
9
Well Control Simulator for iPadShut-in the well
3) The BOP is closed when Choke Option is selected
2) Select the ‘Drillpipe’ and ‘Choke’ options;
1) Tap on ‘Circ’ button on Main View
4) Tap on Circ button again to close popup view
10
Well Control Simulator for iPadClose the choke
5) Tap on ‘close’ button;
6) Repeat until choke closed;
7) Note that kill pressure and choke pressure increases;
11
Well Control Simulator for iPadStabilization of the pressures
12
Well Control Simulator for iPad
Stabilization: ECD at Bottom Hole = Form Equiv Density (Critical ECD) => SIDPP=300 psi, SICP=484 psi, Vol=13.2 bbl
Checking the Stabilization of the pressures
13
Well Control Simulator for iPadStarting the circulation
1) Open Choke ~ 2% (Kill Pressure 500 -> 495 psi) Bring the mud pump to 5 spm
OPEN CHOKE AND START MUD PUMP: Try to maintain KILL PRESSURE CONSTANT (~ SICP = 484 psi for 13.2 bbl)
2) Bring Mud Pump to ~ 5 spm Open Choke ~ 8% Bring Mud Pump to ~ 10 spm
14
Well Control Simulator for iPadStarting the circulation
3) Open Choke ~ 10% Bring the mud pump to 15 spm
4) Open Choke ~ 12% Bring the mud pump to 20 spm
OPEN CHOKE AND START MUD PUMP: Try to maintain KILL PRESSURE CONSTANT (~ SICP = 484 psi for 13.2 bbl)
15
Well Control Simulator for iPadStarting the circulation
5) Open Choke ~ 14% Bring the mud pump to 25 spm
6) Open Choke ~ 18% Bring the mud pump to 30 spm
OPEN CHOKE AND START MUD PUMP: Try to maintain KILL PRESSURE CONSTANT (~ SICP = 484 psi for 13.2 bbl)
FINAL ADJUST MUD PUMP => Real ICP = 505 psi (Initial Circulation Pressure)
16
Well Control Simulator for iPadThe Driller’s Method
Using the ‘Well Control Methods’ App about procedure
17
Well Control Simulator for iPad
Step 1: Circulate out the influx to surface: Maintaining ICP ~ 500 psi
Timer Options
The Driller’s Method
slow / fast buttons
slow / fast buttons
Timer Options
Pause ON/OFF button
18
Well Control Simulator for iPadThe Driller’s Method
Step 1: Circulate out the influx to surface: Maintaining ICP ~ 500 psi
Check for Hydraulics Show / Hide the Bottom Hole Pressure and Pressure at Shoe Depth
19
Well Control Simulator for iPadThe Driller’s Method
Graph Options Reset Options
20
Well Control Simulator for iPadThe Driller’s MethodStep 1: Circulate out the influx to surface: Maintaining DP = ICP ~ 500 psi
21
Well Control Simulator for iPadThe Driller’s Method
22
Well Control Simulator for iPad
Step 2: Filling the Drillstring with Kill Mud Weight Set Kill Mud Weight = 11.1 ppg
1) Tap on ‘kmw’ button
3) Select ‘Enabled’ option;
2) Enter KMW=11.1 ppg; 4) Tap on ‘Set’ button;
The Driller’s Method
23
Well Control Simulator for iPad
Step 2: Filling the Drillstring with Kill Mud Weight: Maintaining Kill Pressure ~ 320 psi
The Driller’s Method
24
Well Control Simulator for iPadThe Driller’s MethodStep 3: Filling the Annular with Kill Mud Weight: Maintaining DP Pressure = FCP ~ 220 psi
25
Well Control Simulator for iPad
This app was developed based on my experience. There was no comparison with any other software.
Our goal was to create a low-cost application with the help of experts to share with drilling engineers, technicians, drillers and students.
You can contribute with suggestions for improvements, correcting the translation to english, reporting bugs and spreading it to your friends.
Please visit our support url and see other applications for Oil & Gas for iPhone, iPod Touch, iPhone and Mac OS X.
Contact:[email protected]
Support URL:http://www.wellcontrol.com.br
On App Store:Oil & Gas Apps for iPhone and iPad
About
26