Welding Short Courses 2017 - Unitec · Welding and Fabrication Short Courses TTEC S069 AS/NZS 2980 Certified Arc Welding Pre-requisites to Enrol Not applicable Minimum Enrolment Number

Welding and Fabrication » Short Courses

Welding Short Courses 2017

Vehicle Systems and Materials Freephone 0800 10 95 10 unitec.ac.nz


Index

TTEC S067 Manual Metal Arc Welding (Introduction) 2TTEC S068 Manual Metal Arc Welding (Intermediate) 3TTEC S089 TIG Welding (Introduction) 4TTEC S088 MIG Welding (Introduction) 5TTEC S065 MIG Welding (Intermediate) 6TTEC S069 AS/NZS 2980 Certified Arc Welding 7TTEC S066 AS/NZS 2980 Certified MIG Welding 8Location 9Further information 9Enrolment information 9


Freephone 0800 10 95 10 » unitec.ac.nz

TTEC S067 Manual Metal Arc Welding (Introduction) Pre-requisites to Enrol Not applicable Minimum Enrolment Number 6 students Maximum Enrolment Number 12 students

This practical hands-on short course provides an introduction to arc welding for students with little or no welding experience, and leads on to a recognised industry standard.

Topics covered on the short course include:

» Introduction to arc welding » Safety precautions » Setup and use of equipment » Mild steel welding » Theoretical and practical training in metal arc welding » Basic down hand welding

Upon the successful completion of the course, you’ll gain credits towards the New Zealand Qualifications Authority (NZQA) unit standard NQF2682, and receive a Unitec Certificate of Attendance.

Note that as this course leads to NZQA Unit standard awards, you’ll need to attach a verified true copy of your passport (and/or permanent residence permit) or NZ birth certificate. (Refer to page 9 for more details).

Fee: $718.74 including GST and NZQA costs

2017 Dates Duration Days Times Class No. Venue15 Feb – 23 Mar 6 weeks Wed/Thur 5.30pm – 8.30pm 3048 108-1064, 108-1071

125-100112 Apr – 18 May 6 weeks Wed/Thur 5.30pm – 8.30pm 3049 108-1064, 108-1071

125-100116 Aug – 21 Sep 6 weeks Wed/Thur 5.30pm – 8.30pm 6477 108-1064, 108-1071

125-100111 Oct – 16 Nov 6 weeks Wed/Thur 5.30pm – 8.30pm 6478 108-1064, 108-1071

125-1001

Location Please meet at Building 91 Room 1001 (opposite Building 107) Mt Albert campus, Gate 4

Note that this course may be taught in conjunction with TTEC S088 and TTEC S089 (dependant on numbers).

Freephone 0800 10 95 10 » unitec.ac.nz2

Welding and Fabrication » Short Courses 3

TTEC S068 Manual Metal Arc Welding (Intermediate)Pre-requisites to Enrol TTEC S067 Minimum Enrolment Number 6 students Maximum Enrolment Number 12 students

This practical hands-on short course is designed for students who have completed the Manual Metal Arc Welding (Introduction) course, or those who have prior experience in basic arc welding.


» Operation of arc welding machinery » Material preparation » Electrode terminology » Down hand in heavy material » Safety precautions and practice

Upon successful completion of the course, you’ll gain credits towards New Zealand Qualifications Authority (NZQA) unit standard NQF2671 and receive a Unitec Certificate of Attendance.







125-1001


Note that this course may be taught in conjunction with TTEC S065 (dependant on numbers).


TTEC S089 TIG Welding (Introduction)Pre-requisites to Enrol Not applicable Minimum Enrolment Number 6 students Maximum Enrolment Number 12 students

This practical hands-on short course provides an introduction to TIG welding for students with little or no welding experience, and leads on to a recognised industry standard.


» Introduction to TIG Welding » Safety precautions and practice » TIG equipment operation » Aluminium welding (TIG) » Basic down-hand welding » Theoretical and practical training in TIG welding

Upon the successful completion of the course, you’ll gain credits towards the New Zealand Qualifications Authority (NZQA) unit standard NQF 2677 and receive a Unitec Certificate of Attendance.







125-1001



4


TTEC S088 MIG Welding (Introduction) Pre-requisites to Enrol Not applicable Minimum Enrolment Number 6 students Maximum Enrolment Number 12 students

This practical hands-on short course provides an introduction to MIG welding for students with little or no welding experience, and leads on to a recognised industry standard.


» Introduction to MIG welding » Safety precautions and practice » MIG equipment operation » Mild steel welding (MIG) » Basic down-hand welding » Theoretical and practical training in MIG welding

Upon the successful completion of the course, you’ll gain credits towards the New Zealand Qualifications Authority (NZQA) unit standards NQF2672 and receive a Unitec Certificate of Attendance.







125-1001



5


TTEC S065 MIG Welding (Intermediate)Pre-requisites to Enrol TTEC S088 Minimum Enrolment Number 6 students Maximum Enrolment Number 12 students

This practical hands-on short course is designed for students who have completed the introductory MIG Welding course, or those who have prior experience in basic arc welding.


» Operation of MIG welding machinery » Material preparation » Down-hand welding position » Down-hand on heavy material » Safety precautions and practice

Upon the successful completion of the course, you’ll gain credits towards the New Zealand Qualifications Authority (NZQA) unit standards NQF2673 and receive a Unitec Certificate of Attendance.







125-1001



6


TTEC S069 AS/NZS 2980 Certified Arc WeldingPre-requisites to Enrol Not applicable Minimum Enrolment Number 6 students Maximum Enrolment Number 12 students

This practical hands-on short course is designed for students seeking certification as an arc welder and who have completed the Manual Metal Arc Welding intermediate course, or those who have equivalent practical experience.


» Material preparation » Low hydrogen electrode welding » Safety precautions and practice » T-fillet welding break-over test

Upon the successful completion of the course, you’ll receive a Unitec Certificate of Attendance.

Upon reaching the prescribed standard, you may attempt the AS/NZS 2980 certification in any of the following four positions: down-hand, horizontal-vertical, vertical, up and overhead positions. The fee for each attempt is $130.00 per test plate. Please note this fee is additional to the course fees.

Fee: $702.69 including GST

2017 Dates Duration Days Times Class No. Venue13 Feb – 21 Mar 6 weeks Mon/Tue 5.30pm – 8.30pm 3066 108-1064, 108-1071

125-100110 Apr – 29 May 7 weeks Mon/Tue 5.30pm – 8.30pm 3067 108-1064, 108-1071

125-100114 Aug – 19 Sep 6 weeks Mon/Tue 5.30pm – 8.30pm 6487 108-1064, 108-1071

125-10019 Oct – 20 Nov 7 weeks Mon/Tue 5.30pm – 8.30pm 6488 108-1064, 108-1071

125-1001



Note: There will be no class held on Monday 17th, 18th, 25th April, Monday 5th June and Monday 23th October 2017.

7


TTEC S066 AS/NZS 2980 Certified MIG WeldingPre-requisites to Enrol Not applicable Minimum Enrolment Number 6 students Maximum Enrolment Number 12 students

This practical hands-on short course is designed for students seeking certification as a MIG welder and who have completed the MIG Welding intermediate course, or those who have equivalent practical experience.


» Material preparation » T-fillet welding break-over test » Safety precautions and practice

Upon the successful completion of the course, you’ll receive a Unitec Certificate of At-tendance.

Upon reaching the prescribed standard you may attempt the AS/NZS 2980 certification in any of the following four positions: down-hand, horizontal-vertical, vertical, up and overhead positions. The fee for each attempt is $130.00 per test plate. Please note this fee is additional to the course fees.

Fee: $702.69 including GST

2017 Dates Duration Days Times Class No. Venue13 Feb – 21 Mar 6 weeks Mon/Tue 5.30pm – 8.30pm 3061 108-1064, 108-1071

125-100110 Apr – 29 May 7 weeks Mon/Tue 5.30pm – 8.30pm 3062 108-1064, 108-1071

125-100114 Aug – 19 Sep 6 weeks Mon/Tue 5.30pm – 8.30pm 6485 108-1064, 108-1071

125-10019 Oct – 20 Nov 7 weeks Mon/Tue 5.30pm – 8.30pm 6486 108-1064, 108-1071

125-1001



Note: There will be no class held on Monday 17th, 18th, 25th April, Monday 5th June and Monday 23th October 2017.

8


LocationAll short courses listed in this brochure are held at Unitec’s Vehicle Systems and Materials, Mt Albert Campus, Entry 4, Carrington Road (see campus map overleaf).

Further information While Unitec has used reasonable care to ensure this publication is accurate at the time of printing, we recommend you check updated information on the Short Course pages of our website www.shortcourses.unitec.ac.nz prior to enrolment.

If you require information to help with your enrolment, please contact Student Central on 0800 10 95 10 or email [email protected]

Enrolment information You can apply online for most short courses (if paying by credit card). If online application isn’t available, or you would prefer to pay by EFTPOS or cheque, you will need to submit a hard copy application form.

You can download and print a short course application form from any short course web page, call Freephone 0800 10 95 10 and request a form to be sent out, or pick one up in person from Student Central. Please return your completed enrolment form, together with your payment, to:

Student Administration Unitec Institute of Technology Private Bag 92025, Auckland Mail Centre Auckland 1142

If you’re a New Zealand citizen and haven’t studied at Unitec before, you may need to provide a certified copy of your passport or NZ Birth Certificate. If you’re a Permanent Resident and haven’t studied at Unitec before, you’ll need to provide a certified copy of your passport including your current residency permits. If you’ve previously supplied this documentation, you won’t need to provide it again unless you have changed your name or residency status.

A certified copy is a photocopy or scan of the document that has been signed by a Justice of the Peace, solicitor or Kaumatua. You can also bring your original documents to any Student Central at Unitec and we’ll copy and certify them for you.

Places on some Unitec programmes are limited, so it’s a good idea to apply early. We accept applications up to seven days before classes start. Occasionally not enough people register for a course, in which case we reserve the right to postpone or cancel. If a course is cancelled, you’ll receive a full refund of the fee.

All fees quoted include GST.

9

Tel +64 9 815 2945Fax +64 9 815 2901 email [email protected]

Postal address Private Bag 92025 Victoria St West Auckland 1142New Zealand

unitec.ac.nz

Oakley C

reek

P FARM RD

RECREATION DR

Taylors Laundry(not a Unitec facility)

Adventure Works NZ

Mason Clinic(not a Unitec facility)

Sports Fields

Accommodation(not a Unitecfacility)

NORTHG REAT ROAD

to Hendersonand West

to Point Chevalier

to North

CAR

RIN

GTON

RO

AD

to Mount Albert

to Avondale

GRE

AT

NORTH

ROAD

MOTORWAY

NORTH WESTERN 16

SEGAR AVE

TASMAN AVE

FONTENOY ST

FIFTH AVE

SEAVIEW TCE

WOODWARD RD

FIR ST

ALVERSTON ST

ALFORD ST

OAKLEY AVE

HERDMAN ST

COWLEY ST

SUTHERLAND RD002

008

006

001

202

007

204

207

208

203205

209

210

005

014206

003

004

016 017

012

010015

009

029

011

018

020 019

022021

025

026

013

041046

051

033

027

047

052

023

200

028

042

032

044

045

030

036

034035

024

037–040

174

172

201

117

048

170

150–159

183

182

180

054

173

164–165 178

177

171

114112

110055

058

060

063

108

107 061

098 100

057115

097118–127

083–096

103

113

062

059056

116

104105

106

111

079

076

072

077073

080

071

075074070

067

102

069

101

068065, 066

078

140

099128–136143–148

A

B

D

C

E

F

G

H

I

J

K

L

M

1 2 3 4 5 6 7 8 9

N

0 50 100

metres

SP

1

P

S

VS

V

P

2

P

P

P

7

P

V6

S S

P

P

P5

P

P

4

8

V

S

SS

S

P

P

3

STUDENTCENTRALTe Pae Kōrero

i

ENTRY 1VISITOR

ENTRY

ENTRY 2

ENTRY 3

STUDENTCENTRALTe Pae Kōrero

i

ENTRY 4VISITOR

ENTRY

P

Shuttle bus route and stops

Pedestrian link

Taxi pick-up points

Waterways

One-way road

Pay and display parking

Visitor parkingGeneral parking

VPP

Sta� parkingS

Public phone – CardTe Noho Kotahitanga Marae

Public phone – Coin

Disabled parking

Concentrix Delivery Centre &IBM Delivery Centre carpark

P

Documents

Welding Short Courses 2017 - Unitec · Welding and Fabrication Short Courses TTEC S069 AS/NZS 2980 Certified Arc Welding Pre-requisites to Enrol Not applicable Minimum Enrolment Number