5/20/2018 Weld Deposite Calculations

1/2

MATERIAL OF VESSEL (CS, SS, ALLOY, ALU) CS

LENGTH (SEAM TO SEAM) (mm) 12443 mm

INSIDE DIAMETER (mm) 3658 mm

THICKNESS (mm) 113 mm

NO. OF CIRCUMFERENTIAL JOINTS 8 Nos

NO. OF LONGITUDINAL JOINTS 1 No.

TOTAL BUTT WELD LENGTH 110.06 Mtr.

BEVEL TYPE ( V or X ) X IN/OUT

R - GAP (mm) 2 mm

R - FACE (mm) 2 mm

ANGLE (DEGREE) 60 Degree

BACK CHIP FACTOR 1.620 1.62

SPECIFIC GRAVITY 7.86 gm/Cm3WELDING TYPE (SMAW or SAW) SAW

48.167 KGS / MTR

5301.16 KGS.

5831.28 KGS.

7289.10 KGS.

BUTT WELDING DEPOSIT CALCULATIONS

TOTAL FLUX FOR SAW WELDING WIRE

WELD DEPOSIT ( KGS / MTR. )

TOTAL WELD DEPOSIT

TOTAL WELDING WIRE (SAW)

VESSEL DETAIL

WELDING DETAIL

WELDING DEPOSIT

5/20/2018 Weld Deposite Calculations

2/2

9/3/2014 10:46 PM

WELDING WIRE/ELECTRODE CALCULATION FOR PIPES PER JOINT

PIPE DIA NOMINAL 10.00 Inches OUTER DIA 273.05 mm

WALL THICKNESS 25 mm UNIT WEIGHT OF PIPE 152.93 KG./M

ROOT PASS GTAW=1 0 SMAW OTHER PASSES 0 SMAW

TIG WIRE ROOT PASS/JOINT - KG ELECTRODE AT OTHER PASSES/JOINT - KGELECTRODE AT ROOT PASS/JOINT 0.105 KG ELECTRODE AT OTHER PASSES/JOINT 6.948 KG

Please enter 7.05Pipe Dia

Wall Thickness

Type of Root Pass (Select 1 or 0)

Type of Other Passes (Select 1 or 0)

To Get Wire/Electrode Quantity

.

PREPARED BY: M. NAEEM A. JANJUA

DATE: JUNE 19, 2000