Welcome to the Trust HiJacker Quick Start Guide. In this Quick Start guide we will

step through setting up your first project in the Trust Hijacker software with the

basic settings, and this will be the default setup for most users.

Before you Begin

Before setting up your first project it’s important to check that your PC has all the

supporting resource files installed so that Trust HiJacker will run smoothly. So

before you begin, head over to the forum thread here

https://petestrafficsuite.com/showthread.php?3470-All-Software-Pre-

Requsitesand-Requirements and go through and install all the pre-requisite files

and read through the other notes on that thread. Also note in that thread the

instructions regarding Google Security email which you’ll need to approve in each

Google account the very first time you use an account in the software.

Once you’ve finished those steps you are ready to get started with your first

project. Note – Once you’ve installed all the pre-requisite files, if you do

experience any problems running the software then be sure to submit a support

ticket over at the support desk here http://support.hangoutmillionaire.com

(register first then submit a new ticket) and our friendly support team will be

happy to assist to get you up and running quickly.

What you need for your project

Here is a list of things you’ll need to input into your Trust Hijacker project, so it’s

best to have these ready before you start setting things up.

A list of keywords - one main keyword plus some additional keywords (5-7 is a

good start).

Your redirection url – This is the website url that you wish to promote. Note this

url MUST be a secure url (so it must start with https). Do not just add the letter S

to a http url. When you open your site in a web browser check that it is secure by

entering https at the start. If you see beside the url a note that it is secure then you

can use the https url as your redirection url in your project.

A text Article related to your keyword – a short 200 to 400 word article is all you

need but can be larger

Two Google accounts – You need two separate Google accounts for a project.

Images – You need some images related to your keyword (5 to 10 is ideal) saved

into a folder on your computer with nothing else inside the folder, only the images.

The ideal dimensions for images is 1280 x 720 pixels. If you don’t already have

images you can go to a site such as https://pixabay.com/ and search for your

keyword and download royalty free images from there for your project.

Youtube Video Urls – Here we need high ranking, high view count videos for your

keyword. So head over to Youtube.com and enter your keyword in the search field

then copy the video url and paste into a text file.

Note – Using the steps above you will get the full video url which starts with

https://www.youtube.com/watch?v= followed by the video id which is the correct

format to enter into the software. DO NOT use youtube shortened urls (which start

with https://youtu.be ) in your projects as this will cause the videos on the google

site pages to show an error and not play.

Setting up Your Project

Profiles Tab – For your first project (or when you need to create a new project)

we’ll leave the drop-down option as it is to create a new project then click Next.

(After you’ve created projects, they will appear in the drop-down list to choose to

run them again).

1. Main Keyword Tab

Next enter your keyword in the Enter Main Keyword and the permalink field will

auto-populate as you type (note that keywords do not include numbers or special

characters). Leave the Template Folder field blank, click the Project Options button

once so that it shows as Repeat Project then add your redirection url shown at #4

and click Next.

2. List of Keywords

Here paste your list of keywords, one per line (again note that keywords do not

contain special characters). It’s best not to go overboard with the number of

keywords you add here as there will be a page created for each keyword on the

Google Site (5-7 is a good number).

3. Article

Next paste your article into the Article box. Before we do the spinning step, if

there are any words in your article that you don’t want changed/want to always be

in the article post, then add them into the Protected field and separate each

word/group of words by a comma (use a comma to separate, not add to the end

of all the words in the Protected list). Next click the Make spintax button and wait

for the software to contact the 3rd party spin site and update the article with

spintax code. When the process has completed, you’ll notice a number of spin

characters in the article which are { | } characters. Once you notice those

characters click Next. (Note – You only need to do the Make spintax step the first

time you setup any new project. If you re-run the project later and it already has

the spintax code in the project article just click Next on this tab).

4. HTML Additional

The HTML box is to allow you to add extra formatted html (links, GMB embeds

etc) which will be explained in the tutorials but for now just leave this blank

and click Next.

5. Google Main Site

Next, you’ll add your Google account to use for the main site (the software will

create 2 interlinked Google Sites during the run which are a Main and a Helper

site and as noted earlier you need a different Google account for each). Under

the Add New Account heading in the Google login field add your google

account user which will end in @gmail.com (this must have the @gmail.com at

the end, not just the username portion) then add the password in the second

field and click the Add new Google account button. Once the account appears

in the top list click on it once to select it then click the Next button to move on.

6. Google Helper Site

Here add your Google account for the Helper site in the same way as we did for

the main site then select it in the list and click Next

7. Site Options

On the site options tab first click on the Browse button, navigate to your image

folder and select an image inside the folder. In the Google Map field add your

city, state and Country separated by commas. (If you’re not targeting a

City/State just enter a Country name here. E.g. United States or USA). In the

Main site url field you can add a different website that you own or just enter

the same url as you entered in the redirect url. Then in the Youtube video URL’s

field paste your Youtube video urls which you found in the preparation step

then click Next.

Start Job

Now everything is ready so go ahead and click the Start work button and Trust

Jacker will begin creating your project. Note that the software does an

enormous amount of work in each project, creating 2 interlinked Google sites

with pages of content for your keywords etc, so it will take a bit of time to

create all these then once complete it will pop up a pdf report listing all the

site links etc.

Once the project completes it will pop up a pdf with all the links to the created

Google sites and subpages for your reference.

Be sure to visit the forum https://petestrafficsuite.com/forum.php regularly to

stay up to date with what’s happening and join in the discussion or post any

questions you might have relating to strategies etc.

To your success.