Upload
bruce-mcdonald
View
214
Download
1
Embed Size (px)
Citation preview
Welcome
SUPPORTED MEDIA
Glycol 100%
Water to 200’C
Gases
-40’C - +80’C
Steam 600’C
Condensate
Ice water
-35’C - +200’C
Steam to300’C
Compressed air
PN16 – PN100
CL150 - CL900
Why butterflies?
Comparison of butterflies DN 200; PN25; with other fittings:
Weight: Length: Height : Moment:
Ball valve140 kg
400 mm 285 mm> 800 Nm
Bellow valve170 kg
600 mm 800 mm
Gate valve105 kg
230 mm 670 mm
Butterfly60 kg
71 mm 550 mm750 Nm
For valves and bellow valves the need to use expensive multiturns drivers
Centric butterfly valves PN6....16:
Soft seal NBR; EPDM, PTFE; Silikon; Viton
Or without seal – leakage about 1% kv for hard seated version
Single eccentric butterfly valves : PN6...25
Only soft seal available NBR; EPDM; PTFE; Viton
Double eccentric butterfly valves : PN6...40(50)
Soft seal NBR; EPDM; PTFE; Viton
Seal metal-metal
Triple eccentric butterfly valves : PN6...100
Only hard seal, metal/metal. There is no trafic friction during opening and
Closing of the butterfly valve. The disc loses contact with the seat immediately after the start of opening. This construction minimizes the torque valve, guarantees 100% tightness and long life of the seal.
Butterfly valves BROEN „AK”
Supplement of BROEN’s offer for cases where are no possibilities to use ball valves Ranges of diameters to DN3000 Standard of production:
• AKW – between flange• AKFL – with flanged • AKBW – with welded ends
Different versions of pressure:• PN25 – to DN 600 in stock• PN16, PN40, PN63 – for special order
Constructions characteristics
• Triple eccentric disc• Seal: lamellar metal/metal• Self-centering seat• Single body casted• 100% tightness to 425’C• Usage:
– energetics– heating– industry
3 - eccentric – the conical shaped sealing surface with the cone axis shifted by the „α „ angle
1 – eccentric moving the shaft relative to the axis of the sealing surface
Triple eccentric - flowchart
2 - eccentric – axis displacement of the shaft relative to the axis of the throttle
2
1
1. No friction between the sealing elements
2. Low torque values
3. Long life
4. The tightness obtained by the torque of the drive
5. The tightness of the variable temperature factor
6. Perfect flow characteristics
Advantages of triple eccentric design
No. Description Carbon
Cast
Alloy Stainless steel
1 Body WCB WC6 CF8 CF8M
2 Ring WCB 304 304 316
3 Disk WCB 304 304 316
4 Seat 420 420 304 316
5 Shaft A276
420
A276
420
A182
F304
A182
F316
6 Gland inserts
graphite
Aplication : Oil ; water ; steam aggressive media
Temperature oC -29..+425 -29.+530 -196...+600oC
The construction scheme
Sizes: DN 80...3000 (in depending on PN)Pressure: PN 0,6...10 MPa
6
2
3
5
4
1
Forged or cast This solution eliminates the risk of leakage between the elements of the body
The applicability of a variety of materials :- carbon steel WCB + 425oC- stainless steel AISI 304 + 600oC
AISI 316 + 600oC
Connections type :1.flanged2.type LUG3.interflanged type Wafer4.welded
Body
Forged or castedThe sealing surface hardened The applicability of various materials:- carbon steel- stainless steel
Rigidly mounted on a single shaft with by means of pins The two-piece shaft option.
Shaft with keyway for diameters up to DN250 possible square
Disk
One piece design of stainless steel: -AISI 420 standard-AISI 304-AISI 316-other materials on request
- double bearing- maintenance-free bearings- self-lubricating standard bronze alloys - optional stainless steel
Shaft
Mounting the drive :
- Basis with drilling wg ISO 5211
- possibility of making unusual drilling
Shaft seal
- Gland seal graphite inserts- gland seal mounted on pins and needles with nuts
Lamella sealing
1.Constructed of several layers of stainless steel and graphite
2.The minimum amount of the graphite extends the life
3.Built in the body or on disk
4.Construction of floating - adapts to disk
5.The tightness achieved by closing torque
6.Insensitive to changes in temperature and pressure
Standard worm gear with hand wheel
Option:
Electric drive- Close and open- adjustable
Pneumatic drive -unilateral action- two-sided action- with wheel for manual action- adjustable i close and open
Hydraulic drive
Drive
Electric drives
- torque 32…600.000Nm- adjustable- close - open ( shut-off )
- AUMA-REMOTE CONTROL-CLORIUS-REGADA
Pneumatic drive
- torque to 15.000Nm- adjustable- close open
-REMOTE CONTROL-CLORIUS
Our projects :
PGE Arena Baltic - GdańskThe National Stadium - Warszawa
Airport Terminal - Gdańsk
District Heating Katowice –
DN 900, DN 700
National Forum of Music Wrocław
Referencje BROEN
Butterfly type AKW
Butterfly type AKFL
Thank you for your attention.