Embed Size (px)
DESCRIPTION
The program guides you systematically through the entire CE process. The interactive software is designed for you to approach the tasks in logical order: 1. Determining EC directives 2. Researching standards 3. Performing the risk assessment 4. Creating the instructions 5. Documentation
Citation preview
1. Configurate WEKA Manager CE – Options and Settings
Go to Software WEKA Manager CE – English Version Screen 1 von 12
2. Start project: define project team and responsibilities
Go to Software WEKA Manager CE – English Version Screen 2 von 12
3. Create the CE-project: Project data and name, Product designation, Manufacturer, Customer and Supplier, Intended use, Foreseeable misuse, Risk estimation, Specify product, Project history
Go to Software WEKA Manager CE – English Version Screen 3 von 12
4. Discribe product: Type of machinery; Limits of machinery; Time limits; Responsibilities for set-up, installation, putting into service; Substantial modification; Technical data; Environmental conditions
Go to Software WEKA Manager CE – English Version Screen 4 von 12
5. Check EC directives: Machinery directive 2006/42/EG, EMC directive 2004/108/EC… Relevance, Requirements, Substantial modification, Annex I MD
Go to Software WEKA Manager CE – English Version Screen 5 von 12
6. Check Annex I of the Machinery Directive: General principles, Essential health and safety requirements, Materials and products, Lighting, Ergonomics, Operating positions, Control systems, Hazard-protection
Go to Software WEKA Manager CE – English Version Screen 6 von 12
7. Search standards: Machinery 2006/42/EG, Low-voltage, EMC, Atex, R&TTE, Pressure equipment, Simple pressure vessels, Medical products, Implanted medical devices, Lifts, Measurement devices…
Go to Software WEKA Manager CE – English Version Screen 7 von 12
8. Start risk assessment: Mechanical - Electrical – Thermal – Noise – Vibration – Radiation – Material - Ergonomics – related to working environment – Combination of hazards
Go to Software WEKA Manager CE – English Version Screen 8 von 12
9. Create intructions: Basic information, Technical Data, Design and function, Delivery, Storage, Installation, Assembly,Operation, Trouble-shooting, Maintenance, Removal and disposal
Go to Software WEKA Manager CE – English Version Screen 9 von 12
10. Create name plate: Position of CE marking and ATEX
Go to Software WEKA Manager CE – English Version Screen 10 von 12
11. Create declarations of conformity
Go to Software WEKA Manager CE – English Version Screen 11 von 12
12 Print documents for the technical file according to Annex VII MD
Go to Software WEKA Manager CE – English Version Screen 12 von 12
