Embed Size (px)
Citation preview
tel. (+31) (0)416 69 34 04 www.allscaleseurope.com
© All Scales Europe
Equipped with programmable inputs and
outputs, 3 serial ports, transmission protocols
for data communication, completely
programmable printouts, graphic display and
input for included bar code/badge reader.
The wide range of connectable accessories and
printers guarantees the maximum
interfaceability and versatility.
Especially designed for advanced industrial automation. The available serial commands enable to automate many functions in the weighing system (implementation depending on application and firmware).
Weight indicator serie VPI-U-Advanced
General main featuresl M- approvable (application for legal trade)
l waterproof 25-key numerical functional keyboard
l programmable function keys, for customising the keyboard
functions according to the needs
l backlit graphic LCD display, with a clear visualisation of the
weight and wide range of information
l equipped with 3-way LED control light made up to sinoptic bar-
graph with 3 groups of 3 Leds each, to tolerance check and
setpoint
l IP64 stainless steel splashproof case, easy to clean and resistant
in harsh and corrosive environments, dim. 269 x 58.8 x 183 mm;
installation on a table, pole (option) or at the wall, mounting
bracket included
l real time clock; integrated alibi memory for M-CE approvable
communication with PC and printer, permanent data memory,
even without electricity
l easy data entry into spreadsheet, database or wordprocessor like
Excel, Access, Word: the weight indicator communicates directly
with the active Windows application
l selection of the programme language directly in the set-up
l A/D 24 bit sigma-delta 4-channel conversion, up to 200 conv./sec.
with automatic selection; filtering system through programmable
software, adjustable according to the system; connectable with up
to 8 analogue load cells with 350 O input resistance
l calibration and Set-Up parameters, configurable from PC with
AllScales Easy or with the keyboard; theoretical calibration with
the entry of the characteristics of the load cells
l up to 1.000.000d displayable for internal factory use and up to
10.000e or multirange 3 x 3000e @ 0,3 µV/d M-CE approvable
version; internal resolution of up to 3.000.000 points
l management of a weighing system with digital equalisation of the
4 cells or management of up to 4 independent weighing systems
(depending on the application software)
l connectable with up to 16 analogue load cells with 350 O input
resistance (45 x 1000 O cells) and to the main digital load cells
available on the market
l connectable to printers and labellers through the available
command drivers
l power: 12 Vdc with external power adapter
Functions available with optional AllScales Easy software:
l configuration, calibration, data entry and print formatting
l recording and storing of all the information on PC
l complete retrieval of the data saved for quick substitution
l instrument calibration with numeric values
CE
Options i.a.: ticket- / labelprinter for panel mounting
Bluetooth-interface
Windows weigh software
USB-interface
868MHz radio modem
433MHz radiofrequency remote control
l
l
l
l
l
l
Digital weight indicator with high performance.
© All Scales Europe
tel. (+31) (0)416 69 34 04 www.allscaleseurope.com
General features I / O SECTION
l RS232/RS485 port configurable for PC, PLC, or
other external units
l keyboard emulation input for connection to PC
keyboard or bar code reader, through cable with
mini DIN connector (optional)
l 2 optoisolated inputs, configurable as remote
function keys or other functions depending on the
software program automation
l 4 optoisolated outputs, with configurable
functions depending on the software program
automation
l external Profibus interface (optional), for
automation management (only for E-AF01
version)
l optional Bluetooth connection, for quick wireless
programming of the activities and the formulas,
through PC or PDA
Features
I / O SECTION VPI-U-Advanced-D1
l START / RESTART dosage, PAUSE / RESET
cycle through external inputs
l formula selection through 2 external inputs
l dual dosage speed (approximate and fine),
through any available contacts or analog output
(optional)
l “Fine” dosage contact active either constantly or
intermittently (jogging)
l input and output with programmable functions
l analog output (optional) proportional to the dosed
weight or to the dosage speed
Weegindicator serie VPI-U-Advanced
The VPI-U-Advanced-serie has the following firmware versions:
- VPI-U-Advanced-D1 for single product dosage systems
- VPI-U-Advanced-01 for totalization and formulation
- VPI-U-Advanced-02 voor for quantity counting systems (pieces, liters, etc.)
- VPI-U-Advanced-03 for vehicle weighing systems
- VPI-U-Advanced-04 for static checkweighing of prepackaged goods
- VPI-U-Advanced-05 for industrial weighing with price computing
- VPI-U-Advanced-09 voor static or dynamic axle weighing systems
Main dosage featuresl for automatic dosage of 1 component
l selectable dosage mode between unloading, automatic or guided manual loading
l management of the dosage on various scales (up to 4 independent)
l management of the production program for dosage up to 4 formulas in sequence, with
automatic selection of the following formula and automatic change of the scale
l management of the volume flow meter, for dosing in litres
l checking of the tare presence at the dosage start; the tare values are programmable for
each formula
l automatic printing of the dosage data
l storage and printing of the consumptions; printouts may be quickly recalled from the
keyboard
l automatic correction of the flight weight
l repetitions of the programmable dosage cycles; infinite cycle function
l tolerance test on the dosed weight, with guided correction on display
l check of the maximum dosage time
l alarms indication on display
l completely programmable printouts, for compatibility with any ASCII printer manageable
through the serial port
l database of 500 formulas with target, speed change threshold, flight, +/- tolerance,
minimum tare and maximum tare values, 2 setpoint values in weight for activation of 2
output
l manual programming of the activities and the formulas
l quick change of the dosage target, using dedicated key
VPI-U-Advanced-D1
D1Firmware
Supplied with special dosage firmware
for single product dosage.
Weighing method for both increasing
(filling hoppers, silos or big bags) and
decreasing weight (dosing exactly
equal portions from a silo, with
arrangements for filling the silo).
One-Component-Dosage
© All Scales Europe
tel. (+31) (0)416 69 34 04 www.allscaleseurope.com
Weight indicator serie VPI-U-Advanced
Particular main features
Particular main features
l gross / net indication
l totalization: dosage weigh totals in load- and unload mode; manual or automatic
totalization; automatic tare function
l 4 total levels independently resettable and printable: partial total, general total, grand total,
total by article
l completely configurable keyboard functions according to the customers’ needs
l 15 configurable and printable text Id´s containing 32 characters, for example: Code, lot ID,
operator ID, shift number, etc.
l database of 1000 articles with 3 alphanumeric descriptions of 2 lines / 20 characters, tare,
linked customer
l database of 200 Customers with alphanumeric description of 5 lines / 30 characters
l database of 300 Tares for each scale (up to 4 scales)
l selection of article, customer, tare from the database through bar code reader, emulating
the keyboard
l fully pogrammable printing reports, suitable for any ASCII printer, connectable to serial port;
printing of dosage data, formula, consumption and cumulative data
l zeroing; gross / net indication; quantity (pieces, litres, Newton, metres etc.) multi scale
counting functions
l totalization: dosage weigh totals in load- and unload mode; manual or automatic
totalization; automatic tare function
l high precision counting in loading and unloading
l entry of reference quantity, known average piece weight or conversion factor
l automatic optimization of average piece weight and quantity
l pieces or quantities dosage, with weight thresholds linkable to the article
l printing of quantity, average piece weight and all the relative data
l 4 totalization levels, resettable and independently printable: partial total, general total,
grand total, total by article
l selfweighed, presettable tare (direct or calculated), manual or automatic tare; unlocked
automatic tare function at the end of the weigh operation
l selection of visualized data on the graphic LCD display (totals, progressives, weight,
quantity)
l completely configurable keyboard functions according to the customers’ needs
l 15 configurable and printable text Id´s, containing 32 characters, for example: Code, lot ID,
operator ID, shift number, etc.
l database of 1000 Articles with 3 alphanumeric descriptions of 2 lines of 20 characters,
average piece weight, tare, customer, 3 set point in pieces
l database of 200 Customers with alphanumeric description of 5 lines of 30 characters.
l database of 300 Tares for each scale (up to 4 scales).
l selection of Article, Customer, Tare from the database through bar code reader, emulating
the keyboard
VPI-U-Advanced-01 Particular firmware for product
totalizing and dosage. Formula
weighing by means of database; data-
and printing management. Printing of i.a. last 1000 weighings.
Database: 1000 articles, 200 customers,
300 tares per weighing platform and 15
programmable texts.
Firmware for articles counting, with
article database, customer database
and database. Internal resolution
up to 1.500.000 points; maximal 5
connectable weigh platforms.
tare
01Firmware
Totalizing and Dosage
02VPI-U-Advanced-02
Quantity Counting (pieces / liter)
Firmware
© All Scales Europe
tel. (+31) (0)416 69 34 04 www.allscaleseurope.com
serie VPI-U-Advanced
Particular main features
l zeroing; gross/net selection; automatic tare or preset tare; blocked or unblocked tare
l data storage of in- / outgoing loads through ID-code or license number (up to 999
weighings)
l management of second scale: possibility of carrying out the input/output weigh with scale 1
or with scale 2; input weigh with scale 1, output weigh with scale 2 and vice versa
l tare by weighing, through preset (direct or computed); free automatic tare; database of 300
tares per weighing platform (up to 4 platforms); blocked / unblocked tare
l off-/on switchable keyboard functions
l function "A+B" for displaying sum of scale 1 + scale 2
l management of vehicles with trailer also on 2 scales (truck weigh on scale 1 + trailer weigh
on scale 2)
l Master/Slave functioning for managing the weighing system from two indicators
l 15 configurable and printable ID-texts of 32 characters each, f.i. code, lot, operator ID, shift
number, etc.
l database of 500 customers/suppliers with two alphanumeric descriptions of 20 characters
each, linked tare, input total, output total, net total, weighs total
l Database of 500 articles with alphanumeric description of 20 characters each, input total,
output total, net total, weighs total
l database of 500 vehicles with alphanumeric description of 20 characters, license number
(10 characters), linked tare, input total, output total, net total, weighs total
l 6 levels of resettable totals which may printed in an independent way: partial total, general
total, grand total, customer total, article total, vehicle total
l printing of complete database reports or just the handled articles; Programmable printing
from keyboard or from PC; 30 print formats linkable to various functions (Print key, Input
weigh, Output weigh, Single weigh, Partial total, General total, Grand total, Customer total,
Article total, etc.); each print format can contain 2048 positions which may be direct ASCII
codes or preset print blocks (i.e. Company name, weigh and lot progressive, net weight,
memory storage number, customer description, article description, date and time, etc.
Inclusive set of default printouts.
VPI-U-Advanced-03Particular firmware for advanced
applications for weighing / checking of
in- and outgoing vehicles like trucks,
trucks, trailers, tractors etc., with data-
and print management. Operating by
operator or by driver through batch
reader.
03Firmware
Vehicle Weighing
Weight indicator
© All Scales Europe
tel. (+31) (0)416 69 34 04 www.allscaleseurope.com
serie VPI-U-Advanced
Particular firmware for advanced static
checkweighing of prepacked products,
with data- and print management.
04Firmware
VPI-U-Advanced-04
Statistical check functions
Remaining main properties and functions
l Statistical check functions selectable as customized or according to legal norms, with
acceptance/refusal criteria of the lot under examination
l destructive or non-destructive legal control
l calculation and printing of the lot outcome and of the standard deviation
l quantity check in ml by entering a density coefficient for each article
l management of production lines: one can manage up to 10 products simultaneously on one
or more scales (up to 1 scale for each line)
l up to 5 independently connectable verified scales
l zero setting; gross/net selection; manual or automatic totalization, upon stability of weight
or only if within tolerance; horizontal totalization (total of various consecutive weighs)
l calculation function on the displayed weight: it is possible to add, subtract or multiply a
value of up to 7 digits to the value shown on the display; the result of the operation is
shown on the display for a few seconds and is printable
l automatic tare; presettable tare; lock/unlock tare function
l keyboard lock/unlock function
l possibility of connecting an verified precision scale to the third PC serial port (optional)
l 15 configurable and printable ID texts, each of 16 characters, f.e.: code, lot ID, operator ID,
shift number, etc.
l database of 500 articles with: 2 alphanumeric description of 20 characters, density
coefficient, nominal weight, three +/- tolerance levels (T1, T2, T3), linked tare
l 4 levels of resettable totals which may printed in an independent way: partial total, general
total, grand total, total by article
l automatic warning advises to check the configurable calibration
l possibility of setting an access password to the technical set-up and one for the databases
l programmable printing from keyboard of 8 print formats (print key, totalization, lot outcome,
article total, partial total, general total, grand total, first weigh heading); each print format
can contain 512 positions which may be direct ASCII codes or preset print blocks (f.e.
company name, weigh and lot progressive, gross, tare and net weight, article description,
standard deviation, nr. of off tolerance samples, test outcome, date and time of
beginning/end check, etc.
l Included set of default printouts.
l prints list of last 50 weighings; prints article database with each article's weight data
Static Checkweighing
Weight indicator
© All Scales Europe
tel. (+31) (0)416 69 34 04 www.allscaleseurope.com
serie VPI-U-Advanced
Particular firmware for advanced
applications in industrial food-
production and -packaging, with
automatic price computing, article
management, indication on lable of
tracebility, barcode EAN13, EAN128 etc.
05Firmware
VPI-U-Advanced-05
Particular main features
l zero setting; gross/net selection; manual or automatic totalization with calculation of
price/amount
l horizontal totalization (sum by lots), vertical totalization (sum by formulation), in discharge,
and automatic with tare execution
l automatic tare; presettable tare (direct or calculated); unlocked automatic tare; database of
300 tares; lock/unlock tare function
l disabling "areas" of keyboard function
l 15 configurable and printable ID texts containing 32 characters, example: code, lot ID,
operator ID, shift number, etc.
l database of 1000 articles with: 4 alphanumeric descriptions of 30 characters, EAN code of
6 characters, checkdigit on the weight, linked tare, predefined print format, functioning as
weight or price/amount, price, seasoning date, expiry date; 20 linkable ingredients, linked
customer
l database of 1000 ingredients with alphanumeric description of 30 characters
l database of 200 Customers with alphanumeric description of 5 lines of 30 characters
l selection of article, customer, tare from the database through bar code reader (option)
l 4 levels of resettable totals which may be printed in an independent way: partial total,
general total, grand total, total by article
l calculator function: it is possible to add, subtract or multiply two values of up to 7 digits
(entered through the keyboard), print the result and apply it to the tare
l programmable printout from keyboard of up to 30 formats linkable to the print functions
(print key, totalization, article total, partial total, general total, grand total); each print format
can contain 2048 positions which may be direct ASCII codes or preconfigured print blocks
(f.e. product description, EAN code, ingredient description, EAN code, ingredient
description, lot and weigh progressives, gross / tare / net weight, additional total, time &
date
l Inclusive set of default printouts.
l prints list of last 50 weighings; prints article database with each article's weight data
Weighing and Price Computing
Weight indicator
© All Scales Europe
tel. (+31) (0)416 69 34 04 www.allscaleseurope.com
serie VPI-U-Advanced
Special firmware for advanced
applications for dynamic or static axle
weighing, with data- and printing
management.
09Firmware
VPI-U-Advanced-09
Particular main features
l zeroing; gross/net selection; automatic tarra or preset tare; locked or unlocked tare
l data memory of in- / outgoing loads via ID-code or license plate (up to 999 weighings)
l dynamic or static weighing / checking of in- and outgoing vehicles
l master/slave configuration for system management with 2 weighing indicators
l 15 configurable and printable ID-texts, 20 characters each; code, lot ID, operator ID, shift
number, etc.
l database of 500 customers/suppliers with two alphanumeric descriptions of 20 characters
each, linked tare, input total, output total, net total, weighs total
l database of 500 articles with alphanumeric description of 20 characters each, input total,
output total, net total, weighs total
l database of 500 vehicles with alphanumeric description of 20 characters, license number
(10 characters), linked tare, input total, output total, net total, weighs total
l 6 levels of resettable totals which may printed in an independent way: partial total, general
total, grand total, customer total, article total, vehicle total
l printing of complete database reports or just the handled articles; programmable printing
from keypad; 30 print formats linkable to various functions (Print key, Input weigh, Output
weigh, Single weigh, Partial total, General total, Grand total, Customer total, Article total,
etc.); each print format can contain 2048 positions which may be direct ASCII codes or
preset print blocks (i.e. Company name, weigh and lot progressive, net weight, memory
storage number, customer description, article description, date and time, etc. Inclusive set
of default printouts
Dynamic / Static Axleweighing
Weight indicator
