Upload
vandieu
View
235
Download
1
Embed Size (px)
Citation preview
Weidmüller Lights Up Waitomo
•Newdistributionpartnershipwith Eaton Industries
•IntroducingShaneHall
•FlukeTi400InfraredCamera
•Partex…AttheforefrontofIdentification Technology
Featured inside:
Scan QR Code to visit our
website
APRIL 2014
The team at Waitomo Caves first became
aware of the cave lighting expertise
Weidmüller provides during a presentation
by Weidmüller at one of the ACKMA
(Australasian Cave and Kast Management
Association) conferences a few years ago.
The award winning Jenolan Caves a
few hours west of Sydney is one of the
big success stories for Weidmüller LED
Lighting Design Specialist David Head
with three caves now 100% illuminated
with the Weidmüller LED fittings.
Prior to the advent of LED cave lighting
most commercial caves worldwide utilised
inefficient incandescent lighting which
emit a dull yellow cast giving a visual
experiencethatisfarbelowwhatcannow
be achieved with LED lights.
90% of the output of an incandescent
globe is infrared radiation (heat) and these
low efficiency lights cause damage to the
cave micro habitat through the formation
of Lampenflora which includes mosses,
greenalgaeandinextremecasesferns.
LED lighting reduces power consumption
by up to 90% and has a life expectancy
of up to 50,000 hours compared to 1000
to 2000 hours for incandescent lights.
They also have an ideal operating voltage
(typically 24VDC) which means a simple
battery backup system can be installed for
power outage purposes.
The historic Aranui Cave was discovered
back in1910by localmanRurukuAranui
whilstonapighuntingexpeditionandhas
been one of Waitomo’s attractions ever
since.
Environmental Officer for Aranui and
Ruakuri caves Travis Cross along with
External Consultant John Ash invited the
Weidmüller team and local distributer,
Cuthbert Stewart Ltd (CSL), to visit and
advise on the best Weidmüller LED options
for the Aranui Cave.
www.cuthbertstewart.co.nz Ask CSL - 0800 288 423
of Lampenflora which includes mosses,
green algae and in extreme cases ferns.
Incandescent versus LED lighting
Travis Cross, Waitomo Caves; Geoff Thomson, Weidmüller; Peter Gillespie, CSL.
CONTINUES >
www.cuthbertstewart.co.nz AskCSL-0800288423www.cuthbertstewart.co.nz AskCSL-0800288423
ExperiencethePoweroftheSun…
The majority of the installation utilised
the small 200 lumen output Rockstar
fitting to highlight formations and
decorations and the Medium 700
lumen output Enviromini unit for
general lighting for all formations. Both
fittings offer a choice of beam angles
and colour outputs ranging from cool
white through to neutral and warm
options as well as internal ramp up and
ramp down modes.
The 7000 lumen Visi Bright Floodlight
was chosen to illuminate one of the
larger chambers. This light has been
used predominantly in the Rolling Stock
Industry in Australia for locomotive
headlights and provides a stunning
solution for large cave areas.
The lighting and control system
install was undertaken by John Deere
Electrical Te Kuiti and provides the
Cave Guides with control switching
throughout the caves so that areas and
individual formations can be switched
in and out as required. The original AC
lighting reticulation system was 110
VAC and Interfacing this with the 24
VDC requirements of the Weidmüller
LEDs provided some challenges
including ensuring that both AC and
DC voltage levels remained constant
throughout.
A third project install in the Aranui
Caves will be undertaken during 2014
and both the CSL and Weidmüller teams
are again looking forward to being part
of such an innovative application of
the technology. We encourage all of
our customers and associates to head
down to Waitomo to experience Aranui
and all of the other stunning attractions
this beautiful part of New Zealand has
tooffer.
CSL is proud to have added Power Distribution and Control products from Eaton Industries to their stable of products after signing a strategic distribution agreement with Eaton Industries late last year. Eaton is a diversified power management company and global technology leader providing energy-efficient solutions that helpitscustomerseffectivelymanageelectricalpower.Theelectrical group is the largest division of Eaton and is a global leader in electrical power distribution, power quality, power control and industrial automation products.
CSL is now strategic channel partner for components whichincludestheCutler-Hammer®,MEM®,andMoellerranges. This extensive range from Eaton completes a significant portfolio of industrial products for CSL who can now provide a ‘one stop shop’ to customers for industrial electrical products.
CSL has been representing other leading brands in the hazardous area market for many years such as
Cooper Crouse-Hinds, Cooper CEAG and CooperMacey and when Eaton acquired Cooper Industries plc in November 2012 it cemented Eaton Industries as a significant supplier to the company. The 2012 revenue of the combined companieswasUS$21.8billiononapro forma basis and is one of the largest manufacturers of industrial electrical products internationally.
Phil Elliott, CSL’s Chief Executive says “The new partnership stays true to one of our cornerstone principles of partnering with manufacturers of the highest quality with internationally recognised brands. Our initial stock is now in store and we’re excited to be talking to customers about their individual product needs”.
For more information on the Eaton range or to talk to us aboutwhatwecanofferyourbusinesspleasecontactour sales team.
Weidmüller Lights Up Waitomo(cont)
• Plugandplay,startupwizard,advanceddiagnosticcapability,copy/pasteparameterswithoutpoweringdrive
• RoHScompliance• InternalEMCfilter
complyingwithIEC61800-3
• RS485/ModbusandPIcontrollerin-builtasstandard
• Ratings:1-ph240Vinputto2.2kW,3-ph415Vinputto7.5kW
M-Max variable speed drives Conformal coated boards & inbuilt EMC filter
• Startersupto11kW• IP65plastic
enclosures• Fullycompliantwith
IEC60947-4-1• Seperateoverload
relaysofferflexibility
• 240Vor415ACcoilsstandard.Alternatecoilvoltages
• Contactorsinclude1NOauxilliary contactasstandard
EDOL range Separate overload relays offer flexibility
• Availableinratingsfrom1.1to110kW
• LEDdisplaysdevicestatusandprovidesfaultindication
• Lessheatminimisesenclosuresizeandcoolingrequirements
• 24Vdccontrolmoduleenhancespersonnelandequipmentsafety
• Tool-lessconnection,240VACcontrol,communicationscapableviaSmartwireDTinterface
DS7 soft starters Economical replacement for star-delta starters
Proudly supplied by:
• EASY500seriesisidealforcontrollingsmallapplicationswithupto12I/Osignals
• EASY700seriescontrolsmediumsizedapplicationswith20I/Opoints(expandableto40)
• EASY800seriescontrolslarge-scaleapplicationswith20pointsupto320pointsusingEASY-NETnetwork
• Lighting,energymanagement,industrialcontrolandHVAC
EASY intelligent relays Quick to connect, simple to control & display
Z Series DIN contactors and relays Inductive AC3 ratings available on 25, 40 & 63A versions
• 20,25,40and63Ampratingsavailable
• Differentcontactconfigurationversionsavailable
• InductiveAC3ratingsavailableon25,40and63Aversions
• DINrailmount• IP40Protectiononterminals• Ideallysuitedtoswitchinglighting,
heating,hotwaterandstorageheatingapplications
• Ergonomicdesignensuringeaseofoperation&brightillumination
• IP66degreeofprotectionasstandard(manydevicesIP67,IP69)
• VibrationresistantLED’soffer100,000hourslife
• Emergencystops,footswitches,LEDsanddoubleactuatorsavailable
22.5mm pushbuttons M22 series IP66 operators, ideal for washdown applications
• AC-3contactorratingsto1600A
• AC-1contactorratingsto2600A
• PanelorDIN-Railmountingto65A
• IP20fingerandbackofhandproof
• BuiltinNOorNCauxiliarycontactsto32A
• ACorDCcoiloperation
DILM contactor range Type 2 coordination, dual power terminals to 400A
• Controlandprotectionformotorcurrentsupto65A
• Minimumheatlosses
• Largeelectronicallycontrolledsettingrange
• TrippingclassesgreaterthanCLASS10• Exchangeablecontrolunits• 3baseand5controlunitscovermotor
loadsupto30kW
PKe electronic motor circuit breakers 3 base units & trip blocks cover entire range to 65A
• 15to1600Ainjustfourframesizes.
• Commonsizedframesizesregardlessofbreakingcapacity.
• Fullyratedatambienttemperatureof50°Cunderfullloadconditionswithoutneedtoreducetheratedcurrent.
• Choiceoftripunitoptionsforgeneralpower,motorloadsorgeneratorprotection.
• Largerangeofeasytoinstallinternalandexternalaccessories.
NZM Breaker
NEW DISTRIBUTION PARTNERSHIP
WITH
POWERUTILITY
ELECTRICAL& AUTOMATION
SOLARENERGY
IDENTIFICATIONSOLUTIONS
HAZARDOUSAREA
TEST &MEASUREMENT
MANUFACTURING &ASSEMBLY SERVICE
ENCLOSURES LV CABLEACCESSORIES
Shane joined the CSL team late last year as a
Sales Engineer based in Auckland . Nelson born
Shane began his working life with the Nelson
City Council where he completed his electrical
apprenticeship. Work as an electrician followed
at Newcombe Electric and then a stint in his
own business.
A love of travel (and cars) saw Shane take up the
position of Crew Chief on a Midget Speedway
in Central California. Travel continued to be a
passion with trips to many places including the
Mayan Pyramids of the Yucatan.
Following his return to NZ Shane worked in
both electrical wholesale and switchboard
building before leaving the mainland to join
CSL. Shane says ”Coming to work at CSL is a
fantastic opportunity to represent some great
brands that I have known and worked with for
over 30 years “
The new Fluke Ti400 infrared camera is equipped with
LaserSharp™ AutoFocus for perfectly focused images. Every.
Single. Time.
• Fastercommunicationwithwirelessimagetransferdirectlyto your PC, Apple® iPhone® or iPad®
• Captureupto5additionalmeasurementswiththeCNX™Wireless System*
• One-handed,easy-to-useuserinterface
• Ruggedisedhighresolution640x480capacitivetouchscreenfor quick menu navigation
• CaptureadditionaldigitalimagestoshowlocationoradditionalsitedetailswithIR-PhotoNotes™AnnotationSystem
• Moreadvanceddisplayoutputoptionstogetthedetailsviastreaming video to PC or high definition monitor (USB and HDMI)
• Voicerecordingandannotationgetsadditionaldetailssavedwith the image file
• Optionalinterchangeablelensesforgreaterflexibilityinadditional applications
• Rechargeable,fieldreplaceablesmartbatterieswith LED display to show charge levels for excellentfieldflexibility
• High-temperaturemeasurementupto 1200 °C
• 5MPindustrial-performancedigitalcameraforhigh definition image quality
• IncludedSmartView®andSmartViewMobileAppAnalysisandReportingSoftware.
IntroducingShane Hall
Fluke Ti400 Infrared Camera - LaserSharp™ Auto Focus for consistently in-focus images.Every. Single. Time.
At the forefront of Identification Technology…
Ask CSL - 0800 288 423 www.cuthbertstewart.co.nz
ProMark Marking Machine T-800• Compact,fastandportableprinterto
cover all of your label/marker needs.
• EasytooperatewithPartexproductmenu.
• Feeds,printsandcutsbulkPartexprofilesandselfadhesive labels
• StoreandimportmarkerfileswithaUSB-PCconnection.
• Costeffectiveidentificationsystemforuseinpanelbuilding and electrical installations.
Innovation, Practicality and Reliability