June 6 Wednesdayat 11:00 a.m.

Robots(7) Yushin Netliner-VNII-EA-850S as New as 1999(2) Yushin Netliner-VNIIEA-850D Mfg. New 1997Star TW-1800V-460V2 S/N 1X18N-0087 Mfg. New 2004Star TW-1300FM S/N TF13-0089Star TW-1400-FMIIS S/N 12AXM22-01Star TW-1800BM S/N T18B-0109Star TS-1000-FMII-5 S/N T08A-0705Star TW-800V-460V3 S/N 1X07N-4042(2) Star Sprue Pickers S/N 9712-34037 & 9712-34038Yushin Sprue Picker Mdl. HOP-11450 S/N H39301012

Molds(5) Petri Dish Molds

Extruders2.5" Davis Standard-NRM Extruder S/N 19249 ,24/1 L/D, 50 Hp,1750 Rpm, Gear Ratio 15.23.1 Mfg. New in 19962.5" Crown Machine Extruder S/N RC310-001, 50 Hp, 1760 RpmNelmor Extruder Mdl. 25245, S/N 7407087, 50 Hp

Blow MoldersSterling 15 Lb. Dual Head Blow Molding Machine Mdl. SE-415D, Each has15 Lb. Accumulator (Shot), 4 ½” Extruder Size 24/1, 180 Ton Clamp, 74" x 60 "Platen, S/N 66005, Mfg. New 1995Uniloy Single Head Blow Molder Mdl. 250R1-SPI S/N 2936Pugliese Mdl. PAC-1 Dual Head Blow MolderAPV-Sterling 20 Lb Single Head

Dryers(2) Conair Dryer Mdl. MCDW050 S/N 186974 & 182651 Mfg. New in 2005(3) Conair Dryers Mdl. Cs101 S/N 82041, 82042 & 68487 Mfg. New in 1999(4) Matsui DMZ 80 Dryer S/N 02860, 02943, 02952 & 02953 Mfg. New in 1997

Punch Presses200 Ton Bliss 8" Stroke, 52" x 35" Table110 Ton Rousselle 40" x 18" Table110 Ton V&O 34’’ x 21’’ Table60 Ton V&O Punch Press 4" Stroke 39-1/2 x 27-1/2 Table, Mfg. New 198832 Ton Niagra Mdl. A3PL S/N 32225 4" Stroke 23" x 15" Table15 Ton Cutler Hammer 13’’ x 9’’ Table15 Ton Bench Master 7’’ x 8’’ Table

Plastic Injection Molding Machines2650 Ton 319 oz. Husky Mdl. X2650RS140, S/N 9822 Platen Size 84.5" x 84.5", Tie Bar Spacing 78.7" x 78.7", Day Light Max 117", Mfg. New 19921500 Ton 260 oz. Van Dorn 1500M-RS-260F-LP-CV, S/N 018-136 Platen Size 76" x 76", Tie Bar Spacing 52" x 52", Day Light Max 123", Mfg. New 19881450 Ton 251 oz. Toshiba Mdl. ISE1450D-110B, S/N 604405 & S/N 802991, Platen Size 74.8" x 72.8", Tie Bar Spacing 51.5" x 49.8", Day Light Max 98.4",

Injectvisor 500 Control Mfg. New 1986, (2 available)950 Ton 183 oz. Toshiba Mdl. ISGT950-81B, S/N 402011, Platen Size 60.2" x 60.2", Tie Bar Spacing 41.7" x 41.7", Day Light Max 88.6", Injectvisor V10 Control Mfg. New 1994950 Ton 186 oz. Toshiba Mdl. ISG950WII-81B "DOUBLE WIDE PLATEN, Injection Molding Machine S/N 038804 Platen Size 79.5" x 68.3" , Tie Bar Spacing 61" x 49.8",

Day Light Max 88.5", Injectvisor V10 Control, Mfg. New 2000720 Ton 125 oz. Toshiba Mdl. ISE720-54B, S/N 507505 Platen Size 55.1" x 55.1", Tie Bar Spacing 37.4" x 37.4", Day Light Max 70.9", Injectvisor 5000 Control Mfg. New 1986720 Ton 125 oz. Toshiba Mdl. ISE720-54B, S/N 611301 Platen Size 55.1" x 55.1", Tie Bar Spacing 37.4" x 37.4", Day Light Max 70.9", Injectrol V Control Mfg. New 1986500 Ton 60 oz. Ube Mdl. PZIII 500US, S/N 355/A28729 Platen Size 46" x 46", Tie Bar Spacing 32.5" x 32.5", Day Light Max 63", Mfg. New 1995390 Ton Toshiba Mdl. ISF 390-S2, S/N 805473, Platen Size 39.3" x 39.3", Tie Bar Spacing 27.9" x 27.9", Day Light Max 49.2", Injectvisor SII Control Mfg. New 1992390 Ton 40 oz. Mitsubishi Mdl. 390MJ-4, 40.2” x 40.2 “ Platen , 28.7” x 28.7” Tie Bar Spacing, Daylight Max 49.2”, Mac VI Control , Mfg. New 1993200 Ton 18 oz. Niigata Mdl. NN200H4, S/N 25812h Platen Size 29" x 29", Tie Bar Spacing 20.08" x 20.08", Day Light Max 47.5", Mfg. New 1998150 Ton 8 oz. Niigata Mdl. NE150 UA4, S/N 75150F, Platen Size 26.5" x 26.5", Tie Bar Spacing 18.5" x 18.5", Day Light Max 17", Mfg. New 1997120 Ton 6.4 oz. Toshiba Mdl. ISG120N-3B, S/N 812001, Platen Size 26” x 24”, Tie Bar Spacing 18.1" x 18.1", Day Light Max 29.5", Injecvisor V10 Control Mfg. New 199890 Ton 4.6 oz. Toshiba Mdl. ISG90-2B, S/N 730210, Platen Size 21.9" x 21.9", Tie Bar Spacing 14.8" x 14.8", Day Light Max 24.8", Injectvisor V10 Control Mfg. New 199785 Ton 5 oz. Niigata Mdl. NE85 Ua, S/N 50194A, Platen Size 21" x 21", Tie Bar Spacing 14.5" x 14.5", Day Light Max 12", Mfg. New 199980 Ton 5 oz. Nissei Mdl. FS80S12ASE, S/N S08A017, Platen Size 535mm x 535mm, Tie Bar Spacing 375mm x 375mm, Day Light Max 685mm, NC9000 Control Mfg. New 199680 Ton 5 oz. Nissei Mdl. FS80S12ASE, S/N S08N030, Platen Size 535mm x 535mm, Tie Bar Spacing 375mm x 375mm, Day Light Max 685mm, NC8000F Control Mfg. New 199355 Ton 4.2 oz. Arburg Mdl. 320H-210-500, S/N 157506, Platen Size 19.3" x 19.3", Tie Bar Spacing 13" x 13", Day Light Max 24.6", Mfg. New 199340 Ton 3.1 oz. Arburg Mdl. 270S-350-150, Platen Size 19.6" x 19.6", Tie Bar Spacing 10.62" x 10.62", Day Light Max 20.7", Selogica Control Mfg. New 1997, (2 available)

2650 Ton 319 oz. Husky Plastic Injection Molder

1450 Ton 251 oz. Toshiba Plastic Injection Molders

Yushin Netliner-VNII-EA-850S Robots APV Sterling Blow Molder 200 Ton Bliss Punch Press Mould-Tek Blender Branson Welder Gain Gas Assist Units

New1992

New1999

PUBLIC AUCTION SUBASTA PUBLICAW

WW

.MA

CH

INE

RY

NE

TW

OR

KA

UC

TIO

NS

.CO

M

HUGE CAPACITY PLASTIC INJECTION MOLDERSALSO: BLOW MOLDERS, EXTRUDERS, STAMPING AND RELATED ACCESSORIES

This brochure is only a partial listing.Please visit our website

www.machinerynetworkauctions.comfor more detailed listings and photos.

Granulators(2) Ball & Jewell Mdl. BP22 S/N 98A01232 & 98A01234, w/16" x 16" Throats(5) IMS Grinders 15 HP 12" x 17" ThroatFurnas 15hp 12" x 24" ThroatRapid 9" x 12" Throat

ChillersTrane Mdl. RTAA1004 SN/U97D01466 100 Ton Air Cooled New in 1997Aec Chiller Mdl. AC0A045A S/N 6577501A96A, 43 Ton Air Cooled New in 1996

Plastics Auxiliary EquipmentMold Temperature Controllers – Advantage Sentra LE and 2000HE Series asNew as 2005, Sterlco Mdl. F6016 –DX & 3 HP Mdl. M2B2012G and RegoplasMdl. 150KLAthena and Yudo Hot Runner Controllers 4, 8 and 12 zoneSILO – Peabody Tectank S/N 60855 3559 Cb.Ft, 12’D 35’H 1995Blender – Mould-Tek Gravimetric Blender GXD EXAC-U-BATCH, 4 BinBranson Ultra Sonic Welders Model 920IW and 8400(11) Gain Gas Assist UnitsNitrogen Generator CVB Model SNG-3S/98-40 and Nitrogen Tanks

WEBCAST FROM USA: SHERATON SAN DIEGO HOTEL & MARINAFairbanks Ballroom - Bay Tower, Lobby Level, 1590 Harbor Island Dr., San Diego, CA. 92101ONSITE INSPECTION IN TIJUANA, MEXICO: Tuesday, June 5, 8:00am to 4:00pm10069 Pacifico Blvd. PACIFICO INDUSTRIAL PARK, Tijuana, B.C. 22680 (Shuttles Available from the Hotel in San Diego to Plant in Mexico)

Closure of a Division of a Major Custom Injection Molder

BID ONLINE

Help DeskFor Information Regarding Customs, Transportation,

Inspection & Online Bidding, Call Mark: (888) 998-4440or email mark@machinerynetworkauctions.com

Centro de AyudaPara información sobre transportación, aduana, puja por

en línea y inspecciónes llamen directo con Edgara (818)-465-6700, edgar@machinerynetwork.com

1 OF 2

1 OF 111 OF 7

All prospective bidders must register & be approved by Machinery Network Auctions no later than 24 hours prior to the startof the auction. Perspective bidders must fill out & return the online bidder approval form (a copy of which will be emailedto you after registering) and also post a deposit of approx. 10% of their planned spending budget in order to be approved.All equipment described herein will be sold "as is", "where is" to the highest bidder or bidders for cash in accordance withour regular terms and conditions of sale. Neither seller nor auctioneer makes any warranty, express or implied, as to thenature, quality, value or condition of any asset. Auctioneer and seller expressly disclaim any warranty of merchantability,fitness for a particular purpose or non-infringement. All payments must be made in US Dollars. To qualify to bid onsite, a $200refundable cash deposit is required to participate. The deposit will be applied towards the purchase price for any successfulbuyer. Each successful buyer must pay a 25% deposit toward the purchase price immediately following the successful bidmade by cash, check or wire transfer only. Company and personal checks accepted only if accompanied by a letter fromyour bank guaranteeing your funds. All sales are subject to federal, state and/or local taxes. All taxes must be paid by buyer.A VAT or import tax may be applicable In the event a 16% or 11% I.V.A. tax is applicable as a result of the sale, such tax shallbe paid exclusively by Buyer. 0% for Assets temporarily imported into Mexico under a Maquiladora (IMMEX) Program,unless the assets stay in Mexico, in which case an I.V.A. of 16% and taxes for nationalization will have to be paid by the Buyer.All balances are due at the conclusion of the sale. No merchandise may be removed while the sale is in progress. All bidders mustcomply with our Standard Terms of Sale, copies of which will be available at the sale site or can be obtained from our website.

13.5% ONSITE BUYER'S PREMIUM • 16.5% ONLINE BUYER'S PREMIUM.

200 Ton 18 oz. Niigata Plastic Injection Molder 90 Ton 4.6 oz. Toshiba Plastic Injection Molder 80 Ton Nissei Plastic Injection Molder 950 Ton Toshiba Plastic Injection Molder Davis Standard Extruder

WEBCAST FROM USA: SHERATON SAN DIEGO HOTEL & MARINAFairbanks Ballroom - Bay Tower, Lobby Level1590 Harbor Island Dr., San Diego, CA.ONSITE INSPECTION IN TIJUANA, MEXICO:Tuesday, June 5, 8:00am to 4:00pm10069 Pacifico Blvd. PACIFICO INDUSTRIAL PARK, Tijuana, B.C.(Shuttles Available from the Hotel in San Diego to Plant in Mexico)

15910 Ventura Blvd, Suite 1410Encino CA 91436www.machinerynetworkauctions.com

888-998-4440

New1998

New1997

New1996

New2000 1996

Scan Hereto Register for the Sale!

WW

W.M

AC

HIN

ER

YN

ETW

OR

KA

UC

TIO

NS

.CO

M

RIGGER: SERMAQ (619) 671-9214 Ask for Patty REMOVAL: ALL ITEMS Must be removed no later than June 30, 2012. NO EXCEPTIONS.

HUGE CAPACITY PLASTICINJECTION MOLDERS

ALSO: BLOW MOLDERS, EXTRUDERS,STAMPING AND RELATED ACCESSORIES

950 Ton Toshiba, Mfg. New 2000 Star Robot, Mfg. New 2004

TERMS OF SALEHead west on Airport Terminal Rd. Slight left to stay on Airport Terminal Rd. Keep right atthe fork. Turn left onto N Harbor Dr. Turn left onto W Grape St. Take the Interstate 5 Sramp. Merge onto I-5 S Entering Mexico. Continue onto Bursátil/Dist Caracol Zona delRío. Continue onto Paseo de Los Heroes. Continue onto Vía Rápida Pte. Exit onto VíaRápida Pte. Turn right onto Las Rocas. Turn left onto Federico Benítez López. Take theramp onto Bulevar Lázaro Cárdenas. Slight left toward Bulevar Lázaro Cárdenas. Continuestraight onto Bulevar Lázaro Cárdenas. Turn right onto Pacífico. Continue onto Loreto.Continue onto Cuchuma. Continue onto Pacífico.

DIRECTIONS: From San Diego International Airport to the Plant in Tijuana

Head west on Airport Terminal Rd. Slight left to stay on Airport Terminal Rd. Keepright at the fork. Continue straight onto Harbor Island Dr. Keep right at the fork. Des-tination will be on the right.

DIRECTIONS: From San Diego Int’l Airport to Sheraton San Diego Marina

BID ONLINE

June 6 Wednesdayat 11:00 a.m.PUBLIC AUCTION SUBASTA PUBLICA

June 6 Wednesdayat 11:00 a.m.PUBLIC AUCTION SUBASTA PUBLICA

Closure of a Division of a Major Custom Injection Molder

BID ONLINE

This brochure is only a partial listing.Please visit our website

www.machinerynetworkauctions.comfor more detailed listings and photos.

Help DeskFor Information Regarding Customs, Transportation,

Inspection & Online Bidding, Call Mark: (888) 998-4440or email mark@machinerynetworkauctions.com

Centro de AyudaPara información sobre transportación, aduana, puja por

en línea y inspecciónes llamen directo con Edgara (818)-465-6700, edgar@machinerynetwork.com