Upload
lamthuan
View
217
Download
3
Embed Size (px)
Citation preview
various widths are interchangeable.and six inch widths as well as 12 inch widths. The dispensing systems are available in combination four of beads per gallon is a good rule of thumb). These easily adjustable using only a screw driver (six pounds the wet paint line. The amount of beads dispensed is the width of the dispenser is then deposited onto opens simultaneously with the gun. A shower of beads When the gun is actuated, the bead dispenser door
auxiliary power source is required for operation.These systems are gravity flow units. No air or
dispenser is mounted directly behind the spray gun.fittings and hardware required for operation. The bag of beads, a single or dual dispenser and all hoses, with a 50-pound capacity hopper that accepts a full beads on traffic paint lines. These systems are complete systems are designed to deposit retro-reflective glass Titan Tool Incorporated’s glass bead dispensing
Dispensers?Why Titan Glass Bead
DispensersGlass Bead
.otal ReliabilityT. Advanced Performance
TITAN™ Glass Bead Dispensers
Bead dispenser only, 12” BD-1200G Second gun kit, 12” 424-841
Bead dispenser kit, single 12” 424-840 INCH BEAD DISPENSERS AND KITS12
Bead dispenser only, 6” BD-600G Second gun kit, 6” 424-816
Bead dispenser kit, dual 6” 424-836Bead dispenser kit, single 6” 424-826
INCH BEAD DISPENSERS AND KITS6
and airport lines.Shown above are dual 12 inch dispensers used for continental crosswalks Single gun kits are standard with optional second gun kits available.
as 12 inch wide units. Bead dispensers are available in combination 4 and 6 inch widths, as well
allow electing 4 or 6 inch width.slide plate opening behind door. Dual plates Flow of beads is controlled by adjusting the
painting lines where beads are not needed.ease of installation and removal when Quick connect swivel fittings linkage provide
powder coated hopper and mounting brackets.mounting the bead hopper very easy. Durable Pre-drilled and tapped holes in frame make
operation (tools not included)hoses and all mounting hardware required for Kits come complete with hopper, dispensers,
warranty information.Call Tech Services at 1-800-526-5362 for complete Visit us on the web at: www.titantool.com
Fax 1-800-528-48261-800-526-5362Minneapolis, MN 554471770 Fernbrook LaneTitan Tool, Inc.