If you can't read please download the document
Upload
dinhtu
View
217
Download
1
Embed Size (px)
Citation preview
Arctic Chiller Group Training Programs
The Arctic Chiller Group is proud to provide a training course for technicians with the necessary skills to maintain and trouble-shoot the Arctic Chiller Systems. This 3-day course covers the latest in Danfoss Turbocor compressor technology, monitoring software, controllers, and Arctic Chiller systems.
COURSE DESCRIPTION
Maintenance Training Service Providers
This course is for the service contractor who will maintain and troubleshoot the equipment.
Course Outline
Arctic Group Chillers
Key features of air-cooled chillers, water-cooled chillers, and compressors
Turbocor Compressor
Detailed schematic of major components
Methods of controlling the compressor
Troubleshooting and maintenance
Turbocor Software
Chiller Controls
Commissioning, general maintenance, warranty procedures
Factory tour at our head office in Brampton, ON
Compentencies Achieved
Turbocor compressors
TT300-TT500 components and troubleshooting
Turbocor monitoring software
Arctic Chiller controllers
Set up and adjustments
Sporlan expansion valves
Expansion valve controller set up and adjustments
This course is designed for the individual technician to carry out maintenance of the chiller systems outside of the warranty period, service, and troubleshoot the Arctic Chiller Group chiller systems. This certification is valid for a period of 2 years. A refresher course may be necessary to gain knowledge on new innovative designs and technology unless otherwise stated.
Duration
21 hours over 3 days (9:00 am to 4:00 pm)
Cost
$ 2,200.00 per person
Price includes:Danfoss Turbocor software
Current manuals in electronic format and hard copy
Danfoss Turbocor DC Power Test for the compressor
Pocket Guide for troubleshooting
Hotel stay at the Hilton Garden Inn (breakfast included)
Lunch for 3 days
1 complimentary dinner
Shuttle service to our Head Office in the morning
**Cost is based on a maximum-sized class of 8 participants only. Payment must be made in full at least 1 week prior to the class start date.
Application forms are available below. Please complete and submit the online form and submit as follows:
Mr. Justin [email protected]
-or-
Rozi Rudar [email protected]
-or-
Fax to the attention of Rozi Rudar at 905-789-9989
Scheduled Training Classes
The following dates have been tentatively scheduled for the technical training classes and are subject to change. Prior to booking flight reservations, please wait for your confirmation.
Arctic Cool Chillers Limited reserves the right to cancel or re-schedule classes as deemed necessary. All confirmed participants will be notified in advance.
Date
Location
Availability
September 25 - 27, 2013
Brampton, ON
8 spaces
October 23 - 25, 2013
Brampton, ON
8 spaces
Technical Training
Summary
The Arctic Chiller Technical Training course is designed to train technicians with the necessary skills to maintain and troubleshoot Arctic Chiller products. The 3-day course that starts at 9:00 am covers topics such as the Danfoss Turbocor compressor technology, and Danfoss and Schneider controllers. Lunch will be served and training will resume thereafter, until approximately 4:00 pm.
Upon successful completion of this course, the certified technician will be authorized to maintain and troubleshoot the Arctic Cool Chiller systems. However, this course does not allow certified technicians to become certified trainers for the Arctic Cool Chiller systems or Danfoss Turbocor systems. The certification will remain in effect for a period of 2 years upon successful completion of the training course. Arctic Chiller Group reserves the right to require additional courses or refresher training in order for the certification to remain valid.
Arctic Chiller Group reserves the right to enroll applicants for any training course and the right to reject applicants or refuse certification, at its sole discretion, if the pre-requisites are not met and to the satisfaction of administrators.
Location
Arctic Cool Chillers Limited
2100 Steeles Avenue East
Brampton, ON
L6T 1A7
Canada
Phone: 905-789-9988
Fax: 905-789-9989
Cost
CAD $ 2,200.00 per person
HST is extra where applicable
Hotel stay at the Hilton Garden Inn in Brampton, ON. Breakfast is included for each day.
Lunch will be provided each day
1 complimentary dinner will be provided
Shuttle service will be provided in the morning from the hotel to our Head Office
Airline tickets and taxi/car rental costs will be at the expense of the participant and should not be pre-booked until authorization is granted for participating in the training course
Cancellation Policy
Arctic Chiller Group reserves the right to cancel a scheduled training course and re-schedule a training course if enrollment is insufficient a minimum of 2 weeks prior to the scheduled course date. Please confirm scheduling prior to making any travel arrangements.
Pre-requisites
Previous accreditation in HVAC/R or minimum field experience
Documented Education (1 of the following)
Engineering Degree
Associates Degree
Certificate
Trade Certificate
5 years minimum experience with Centrifugal chillers
Adequate Computer Skills
Familiar with Microsoft Windows
Familiar with Microsoft Office
Ability to copy/paste files/folders
Ability to open, create, and save files
Ability to capture screen shots
Ability to download and install software
Familiar with basic multi-meter functions
Measuring resistance ()
Measuring voltage (V)
Measuring amperage (A)
Measuring milli-amperage (mA)
Measuring continuity ()
Measuring diodes
Measuring capacities
Laptop Computer
Windows XP/Vista 32 bit Operating System or Windows 7 with 32 bit XP emulator
Adobe Reader
Microsoft Word
Microsoft Excel
Portable wireless internet access
English Language
Spoken
Written
Preferences
Ability to read P&ID documents
Previous electrical training
Previous centrifugal chiller experience
Previous VFD experience
Previous controls experience
Course Outline
Day 1
Company Overview/Technology History
DTC Compressor
Compressor overview and key features
Discussion on centrifugal compressors
Compressor in-depth
Compressor operation
Day 2
Controller review
Controller set up
Controller trouble shooting
Software installation
Chiller component review
Field Server set up & operation
Day 3
DTC Service Monitoring Tool (SMT) installation
STC SMT overview
Compressor troubleshooting
Technical literature familiarization
Arctic Cool Chiller forms and procedures
Enrollment Form
Contractor
Company Name
Contact Name
Address
City
Province/State
Office Phone Number
Office Fax Number
Applicant
Name
Title
Cell No.
Course Pre-requisites per Applicant
Education
No. of years experience with centrifugal chillers
Computer Literate?
Yes No
Familiar with basic multi-meter functions?
Yes No
Do you have the laptop computer pre-requisites?
Yes No
Training dates preference
Purchase Order Number
Method of Payment
Office Use Only
Training Date Session
Pre-requisites confirmed
Confirmed to client via:
Payment received