Step 1. Connect your strips to controller (take

WS2812B for example)

I just connect strip to one port, you can connect as

many port as you want based on your project.

Step 2. Program with LED Build

LED Build Software Download Link: 

https://drive.google.com/open?id=1DUF7TwbdJ-

k_RLnPPTMX3rhHBc1x6EYA

LED Build Software Tutorial Video(especially for

H803SA): https://drive.google.com/open?

id=1scuoAgFEXGQSubIM6dblVSMdj20xuBy7 

Test file download: 

https://drive.google.com/open?

id=0B1gzqyV6hfOgcE1DbDNKVG5uZmM (8 ports,

each port 300 pixels, for WS2811, WS2812 and

other single line chips, just put these files in sd

card)

Basically, you can learn everything you need to

make H803SA work from the video. The

following is some text explanation.

Place Pixels

Light Setting

Tips

(1) . In sculpt window, you can press “Ctrl” as

dragging a rectangle from a point, you can set

size as you want.

(2) . when you choose color in color plate, click

one color, press “Ctrl” as clicking another

color(or the same color), one color will gradually

change to another color.

Step3. Output controller data and put it into SD

card

Step 4. Configure controller with three buttons

Work with DMX Console

This mode also needs SD card. SD card stores files.

When H803SA is connected to DMX console, you can

use DMX console to switch files, change speed and

brightness.

For example if DMX address is 1, channel 1,2,3 on

console are available.

If DMX address is 2, channel 4,5,6 on console are

available, etc. You can also connect DMX console to

multiple H803SAs together.