ecomark.jpecomark.jp/english/word/144eA1.doc · Web viewJES label certificate third-party test institute 4-1.(4) elution of heavy metals from leather material Results of elusion test

144V1 attached certificate

Eco Mark Product Category No.144 “Leather clothes, gloves and belts Version1” Attached Certificate

This attached certificates shall be submitted accompanied with “Application for Eco Mark product certificate and utilization” when applying for the product category No. 144 “Leather clothes, gloves and belts Version1”. <How to Prepare Attached Certificates>

1. Indicate details of the product under application for certification in “Fill in this Column”. * Shaded areas in “Fill in this Column” do not require entry.

2. Prepare the certificates specified in “Documents to be submitted”. Submit these documents with this certificate when applying for Eco Mark Product certification or use.

* Prepare certificates referring to the Form provided.3. The issuer(s) in the “Issued by” column must prepare “Documents to be submitted”.4. Shaded items in “Documents to be submitted” do not require submission.

ItemFill in this Column

(check all items that apply) Issued by

Planned Display of Eco Mark < > Yes < > Product < > Packaging

< > Catalogue/leaflet < > User manual< > Other ( )

< > No

(Select where appropriate If you choose <Yes>, please submit design drawing given below.)

ApplicantArticle 3 of Usage Regulations Display of intended location of Eco Mark, display of environmental information below mark

Design drawing to be provided (Format free, text)

* Submit a planned Eco Mark indication (including an indication below the mark) diagram and planned indication part.

* When Eco Mark indicated, in principle, both an Eco Mark certification number and utilization contractor name shall be indicated.

Article 7 of Usage Regulations Display of Eco Mark user name and address, display of certification number

Item Fill in this Column(check all items that apply)

Documents to be Submitted Issued by

Developer of product

< > Other companies < > Own company

* For a product developed by other company, submit the certificate described in the right column.

Approval of Eco Mark Application (Form 144- 1).

Approver of application

If a product with Eco Mark certification under the category is submitted for approval as another brand

Are there any changes in addition to brand name? < > Yes / < > No(Select where appropriate)

(If only the brand name has been changed, the following items do not have to be proved.)

A copy of notice of Eco Mark certification examination resultsProduct category corresponding table between the existing Eco Mark product and one under application

Applicant

Product classification

Small classification defined in Attached Table 1 “Classification of applicable products”＜＞Example: Outerwear

<Usage >< > for Infant (under 36months) < > for Adult

Date of application:

Brand Name

Applicant (company name)

(company seal)

Certificate-1


Required documents for satisfying “4. Certification Criteria and Certification Procedures”

4-1. Environmental Common Criteria and Certification Procedures

Item Fill in this Column(check < > if applicable)

Documents to beSubmitted

Issued by

4-1.(1)leather material

certificate for material used

Form 144-2Applicant

certificate for material used and

certificate of dyeingForm 144-3

or JES label certificate

Tanner

4-1.(2)odor from leather material

Test results or JES label certificate

third-party test institute

4-1.(3)elusion of formaldehyde from leather material

Test results or JES label certificate


4-1.(4)elution of heavy metals from leather material

Results of elusion test (lead, cadmium, mercury, nickel, cobalt, hexavalent chromium and total chromium）or JES label certificate＊lead, cadmium, cobalt, and total chromium shall be tested for each color.


4-1.(5)elusion of pentachlorophenol (PCP) from leather material

Test resultsor JES label certificate


4-1.(6)elusion of carcinogenic aromatic amines of Azo dyestuff from leather material

Test resultsor JES label certificate


Five kinds of carcinogenic dyestuff in leather material

certificate for material used and

certificate of dyeingForm 144-3

or JES label certificate

tanner

4-1.(7)color fastness to rubbing of leather materials

Test results or JES label certificate＊required by each color


4-1.(8)Diffusion of formaldehyde from adhesives

Certificate for material used

Form 144-2 If adhesives used,

Adhesive Conformance Certificate

Form 144-5

Adhesive manufacturer or Applicant

Diffusion of formaldehyde from a fiber material

Certificate for material used

Form 144-2


Certificate-2




Issued by

If fiber material used, Test results of all fiber

materialsForm 144-5

4-1.(9)Dyestuff of fiber material

certificate of dyeing (fiber)

Form 144-6＊required only for a liner cloth (material in contact

directly with skin)

Dyehouse manager

4-1.(10)Process of fiber material

Certificate for material processing

Form 144-7＊required only for a liner cloth (material in contact

directly with skin)

Fiber material manufacturer or applicant

4-1.(11)After-sales service

Applicable portions which provide users with the information on customer service of repair, maintenance, and replacement of accessories and the contact window of such service. (copies of product labels, product tags, users manuals, brochures, etc.. )

Applicant

4-1.(12)specification that can withstand long-term use

For clothes, test results of tensile cut load, stretching, and tear load in JIS K 6553 “Clothing Leathers” for leather materials, and a document describing a concrete way of quality control for strength of seams of a pocket or sleeve, etc.

For headwears, test results of tensile cut load, and tear load in JIS K 6553 “Clothing Leathers”

For gloves, a document describing a concrete way of quality control for strength of an opening.

For belt, test results of color fastness to

third-party test institute or Applicant

Certificate-3




Issued by

rubbing of a leather edge part

4-1.(13)compliance with the Environmental Laws

Environmental Laws and Agreements

Compliance Certificate

Form 144-8

Plant manager of

finished product

4-1.(14)halogen elements in plastic materials used for products and packaging

[Use of halogen elements for polymer structure of plastic materials of the product]. < >Not added / < >Added

If “Added,” documents provided in the right column should be submitted.

[use of plastic packaging material]< >Not added / < >Added

If “Added,” documents provided in the right column should be submitted.

Material of plastic packaging materials(

)

[Use of halogen elements in polymers of plastic materials of the packaging materials]< >Not added / < >Added

If halogen elements added,

Form 144-9and

Copies of a document describing a method of collection (a contact address of the applicant, a description that they will perform collection/recycling etc.), operating instructions, labels, catalogues, etc. shall be submitted.

Applicant

4-1.(15)Provision of information on allergy to natural rubber and metal

[Use of natural rubber]< >Used / < > Not used

[Use of metal]< >Used / < > Not used

If “Used,” documents provided in the right column should be submitted.

The corresponding part that contains information on natural rubber/ metal allergy (copies of product labels, product hangtags, operating instructions, brochures, etc) Explanatory documents if they rarely contact a human body and They can’t contact a human body for a long period of time due to a leak of an allergic component.

Applicant

4-1.(16)Indication of material name, handling method, handling precautions, care and storing method and a date of manufacture of polyurethane

corresponding part that contains the information on the left (copies of product labels, product hangtags, operating instructions, brochures, etc)

Applicant

Certificate-4


4-2. Quality criteria and certification procedures


Documents to be submitted Issued by

4-2. (17)

Product qualityQuality control

certificateForm 144-10

plant manager of finished product or quality control manager

Content of applicable quality

standardTest results

third-party test institute or applicant, etc.

5. ConsiderationsIn manufacturing process, it is desirable to consider the following, although they are not requirements for certification.　Conformance to the following items shall be reported.

Considerationitem

Fill in this Column(check < > if applicable)

Details on the left * If the following space is not enough, separate

sheets may be submitted

5.(1)

Packaging

material

[simple and light packaging]< >Considered / < > Not considered

[repeated use of packaging]< >Considered / < > Not considered

[recyclability and reparability of materials of different types]< >Considered / < > Not considered

[indication of packaging materials]< >Considered / < > Not considered

* list the packaging materials and the packaging method

5.(2)Allergy to rubber adhesives

[consideration to allergy to additives in rubber adhesives]

< > No rubber adhesive is used.

< > The allergic property is checked and an attempt not to use is made.

< > The allergic property is checked and consideration is given by providing consumers with information, etc.

< > The allergic property is not checked and no consideration is given in particular.

*Enter supplementary explanation, if any, about a reason for a response in the left column.

5.(3)surface treatment such as Nappa finish processing

[surface treatment such as Nappa finish processing]

< > No surface treatment is performed.

< >Although surface treatment is performed, consideration is given to durability.

< > Although surface treatment is

*Enter supplementary explanation, if any, about a reason for a response in the left column.

Certificate-5


performed, no consideration is given to durability in particular.

5.(4)Avoid the use of excessive decorative pieces

［Use of decorative pieces］

< > No decorative pieces are used < > Decorative pieces are used, but considered to use less.

< > No considerations to reduce the use of decorative pieces.

*Specifically describe decorative pieces used and materials thereof.

Certificate-6


　Form 144-1　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　To: Japan Environment Association, Eco Mark Office

Approval of Eco Mark Application

Date of issue:

XXXXX XXXXXCompany name

(company seal）

*Issuer: Manufacturer of the product (Approver of application)

We hereby approve that (the applicant company) files an application for

Eco Mark product certification and use under the brand name

“______________” with respect to the product which has been Eco Mark

certified under our brand name “____________” with certification number

(only if already certified).

Certificate-7


Form 144-2To: Japan Environment Association, Eco Mark Office

Certificate of Used Materials

Date of issue: (name of issuing company)

(company seal）* Issuer: applicant

We certify that leather material, textile material and adhesives in the following list are used for the product. (indicate all leather materials, textile materials and adhesives used for the product only)

Product model (product number) of applied product)(　　　　　　　　　　　　　　）* indicate by each product model. One certification is enough if the same materials are used for different products.

<leather material>Parts used(e.g. front

fabric)

Type of leather(circle any that

apply)

Method of finishing(circle any that apply)

color(indicate all

colors）Name of a tanner

cow, pig, sheep, horse, goat

Pigment-finish leatherNatural-finish (light color)Natural-finish (deep color)





<fiber material>Parts used(e.g. front

fabric)

Spinning company (textile material manufacturer)

Product number of the material (fabrics)

Mixture rate(e.g. polyester

100%)

Dyed ornot dyed

<adhesives>

Parts where adhesive is used Name of adhesive (or product number)

Name of adhesive manufacture

Certificate-8


Form 144-3

To: Japan Environment Association, Eco Mark Office

Raw Material and Dyestuff Certificate

Date of issue:

(Issuer : Company Name)(company seal）

[Issuing person]

Address :

Department : Position : Name: TEL: FAX:E-mail:

* Issuer shall be the tanner

1. We hereby certify that the following leather materials are supplied to [Eco Mark product manufacturer].

2. We hereby certify that the following leather materials are by-products of meat (food).

(1) type of leather material 　 e.g. cow leather

(2) point and details of origin

e.g. material originated in a meat center of [country]

3. Regarding dyestuffs used for leather materials, we certify that five kinds of carcinogenic dyestuff listed below shall not be added as prescription constituents.

Five kinds of carcinogenic dyestuff569-61-9 C.I. BASIC RED 9 CI 425003761-53-3 C.I. ACID RED 26 CI 161506459-94-5 C.I. ACID RED 114 CI 236352602-46-2 C.I. DIRECT BLUE 6 CI 226101937-37-7 C.I. DIRECT BLACK 38 CI 30235

Certificate-9


Form 144-4


Conformance certificate on adhesives


(company seal）* Issuer adhesive manufacturer or applicant

We hereby certify that Formaldehyde of adhesives ( ) conforms to

the following items.

*Check < > if applicable, and complete necessary information

< > Raw materials that diffuse formaldehyde shall not be added as a prescription constituent.

< > Formaldehyde is added but the amount contained in the product is less than the following reference value*In this case, an approval stating the test result or the fact the adhesives contained are less than the reference value (Class F, etc) or MSDS, etc.

Substance name

TargetTest methodInfants

(under 24 months)Adult

(skin contact)Adult

(other)

Formaldehyde

16μg/g or less 75μg/g or less 300μg/g or less

MHLW Ministerial Ordinance No. 34

5μg/(m2・h) or less JIS　A　1901

0.3mg/l or less JIS　A　1460

Certificate-10


Form 144-5


Certificate on dyeing (fiber)

Date of issue: ,(Issuer: Plane Manager)Plant name: Name of the responsible person Title

seal (company or

representative’s)Issuer: Manager of a dying plant

This is to certify the dye of textile (product number: ) as follows. * list all the product numbers which require a certification

Dyestuff listed in the following (1)(2)(3) is not added as a prescription constituent. For textiles other than wool, chromium-based dyestuff is not added as a prescription constituent.

(1) Azo dyestuff that may decompose and generate the following carcinogenic aromatic amines (one or more following amines are detected at exceeding 30 mg per 1 kg of product by the analysis method prescribed by the collection of testing procedures containing all the Official Test Methods pursuant to Article 35 of the German Food and Consumer Goods Law).92-67-1 4-Aminobiphenyl 838-88-0 4,4'-Diamino-3,3'-dimethyldiphenylmethane92-87-5 Benzidine 120-71-8 p-Cresidine95-69-2 4-Chloro-o-toluidine 101-14-4 4,4'-Diamino-3,3'-dichlorodiphenylmethane 91-59-8 2-Naphthylamine 101-80-4 4,4'-Diaminodiphenylether97-56-3 o-Aminoazotoluene 139-65-1 4,4'-Diaminodiphenylsulfide99-55-8 2-Amino-4-nitrotoluene 95-53-4 o-Toluidine106-47-8 4-Chloroaniline 95-80-7 2,4-Diaminotoluene615-05-4 2,4-Diaminoanisole 137-17-7 2,4,5-Trimethylaniline101-77-9 4,4'-Diaminodiphenylmethane 90-04-0 o-Anisidine91-94-1 3,3-Dichlorbenzidine 95-68-1 2,4-Xylidine119-90-4 o-Dianisidine; 3,3'-Dimethoxybenzidine 87-62-7 2,6-Xylidine119-93-7 o-Tolidine; 3,3'-Dimethylbenzidine 60-09-3 4-Aminoazobenzene　 (2) Carcinogenic dyestuff569-61-9 C.I. BASIC RED 9 CI 42500 2602-46-2 C.I. DIRECT BLUE 6 CI 226102475-45-8 C.I. DISPERSE BLUE 1 CI 64500 1937-37-7 C.I. DIRECT BLACK 38 CI 302353761-53-3 C.I. ACID RED 26 CI 16150 573-58-0 C.I. DIRECT RED 28 CI 221206459-94-5 C.I. ACID RED 114 CI 23635 2932-40-8 C.I. DISPERSE YELLOW 3 CI 11855 (3) Dyestuff causing skin sensitization2475-46-9 C.I. DISPERSE BLUE 3 CI 61505 3860-63-7 C.I. DISPERSE BLUE 26 CI 6330512222-75-2 C.I. DISPERSE BLUE 35 C.I. DISPERSE BLUE 102

C.I. DISPERSE BLUE 106 C.I. DISPERSE ORANGE 1 CI 11080C.I. DISPERSE BLUE 124 C.I. DISPERSE ORANGE 76

2832-40-8 C.I. DISPERSE YELLOW 3 CI 11855 2872-48-2 C.I. DISPERSE RED 11 CI 62015730-40-5 C.I. DISPERSE ORANGE 3 CI 11005 C.I. DISPERSE RED 17 CI 11210

C.I. DISPERSE ORANGE 37 119-15-3 C.I. DISPERSE YELLOW 1 CI 103452872-52-8 C.I. DISPERSE RED 1 CI 11110 C.I. DISPERSE YELLOW 9 CI 103752475-45-8 C.I. DISPERSE BLUE 1 CI 64500 C.I. DISPERSE YELLOW 393179-90-6 C.I. DISPERSE BLUE 7 CI 62500 C.I. DISPERSE YELLOW 49

Certificate-11


Form 144-6


Certificate on product processing (fiber)


(company seal）*Issuer: fiber material manufacturer or an applicant

We hereby certify (product number : ) as follows;

(Check either one in the “processed” columns. If checked “yes”, attach the required documents.)

Details of

process

processed Required document if yes.

mildew proof < > Yes / < > No Certificate on the type of processing agent (chemical

substances used) (MSDS)

fluorescent

whitening

< > Yes / < > No Amount used ( ) unit ( )　

softening < > Yes / < > No Amount used ( ) unit ( )　

hygienic < > Yes / < > No Certificate on the type of processing agent (chemical


product

bleaching

< > Yes / < > No Certificate on the type of processing agent (chemical


Applied product is < > a fur product / < > not a fur product. (check where applicable)In case of the fur product, the following item shall be certified.

Process using dieldrin / DTTB

< > Yes< > No

Explanation of the conformance to MHLW Ministerial Ordinance No. 34

Certificate-12


Form 144-7


Environmental Laws and Agreements Compliance Certificate

Date of issue: ,(Company name)(Plant name)(Name of the responsible person) title Name

seal (company seal)

Plant address: TEL　　:

* Enter the manager (or the corresponding responsible person) of the plant manufacturing the finished goods in the Name of the responsible person column. * Effective issuing date of this Certificate shall be within three months from the date of application to Eco Mark.

We hereby certify that the following requirements are met:

1. We hereby certify that in manufacturing the applied product, we comply with related environmental laws and regulations and pollution control agreement (hereinafter referred to as the “Environmental Laws, etc.”) with respect to air pollution, water contamination, noise, offensive odor, and emission of hazardous substances.(Please check the relevant boxes as follows to submit the Certificate. It is also acceptable to submit an attached list.)

Name of the Environmental Laws, etc. related to the plant Remarks □ Air Pollution Control Law□ Water Pollution Control Law□ Noise Regulation Law□ Vibration Regulation Law□ Offensive Odor Control Law□ Other: * In the “Other” column, enter the name of law applied to the plant, and if there are regulations or agreements of the area

where the plant is located, also enter the names of such regulations and agreements (e.g., xx Prefecture xx Environmental Conservation Regulation, xx City Pollution Prevention Agreement).

2. We hereby certify that the state of compliance with the Environmental Laws, etc. prior to the date of issue of this Certificate is as follows:(Please check the relevant boxes to submit the Certificate. V iolation refers to administrative punishment or administrative guidance.)□ We have not violated any related Environmental Laws, etc. for the past five years.□ We have not violated any related Environmental Laws, etc. since foundation of the Company

(year).□ We violated related Environmental Laws, etc. in the past five years, have already taken proper

remedies and recurrence prevention measures, and thereafter comply with the related Environmental Laws, etc. properly.*If you committed any violation subject to administrative punishment or administrative guidance, you need to submit the following documents in a and b:

a. For the fact of violation, the guidance document from the administrative agency (including a correction order and warning) and copies of written answers to those documents (including reports on the cause and result of correction)

b. For the management system for compliance with the Environmental Laws, etc., the following materials (copies of recording documents, etc) in 1)-5):

1) List of the Environmental Laws, etc. related to the area where the plant is located;2) Implementation system (organizational chart with entry of roles, etc.);3) Document stipulating retention of recording documents;4) Recurrence prevention measures (future preventive measures);5) State of implementation based on recurrence prevention measures (result of checking of the state of

compliance, including the result of onsite inspection).

　 □ 　 We violated Environmental Laws, etc. in the past, and have not yet taken corrective measures.

Certificate-13


2 pagesForm 144-8 (1/2)


Certificate for Recovery/Recycling of Products that Use Plastics Including Halogen


(company seal）

*Issuer: applicant

We hereby certify that the content of the following description is correct

1. List of recovery/recycling operators (including intermediate processing vendors)/accepting base/intermediate accepting place, etc.

Operator name Role in recovery/recycling, whether or not having a license as a processor, etc.

* If the description cannot fit in the above table, framed space or a separate table may be added.

2. (Actual or Planned) Amount of Shipment, Amount of Recovery, and Amount of Material Recycling of Plastic PartCheck a corresponding of “Actual” or “Planned”

Period 期間

Amount of Shipment of

Plastic Part of Product (kg）

[A]

Amount of Recovery of

Plastic Part of Product (kg）

[B]

Recovery Rate (%)

[B]/[A]

Amount of Material

Recycling (kg)[C]

Material Recycling Rate (%)

[C]/[B]

Acctual

Planned

From: Year MonthTo : Year Month

Supplementary explanation when reporting a planned amount, not an actual amountStarting date of product sale (shipment): Year Month Time required for shipment to recovery (average): months

Note) After a utilization contract is concluded, Eco Mark Office may request an applicant to report the recovery rate (or may conduct auditing).

Certificate-14


Form 144-8　(2/2)　

3. Others (Management System, etc.) (Check the corresponding .)1) Method of obtaining a material to be recovered

Purchase as a valuable resource/ □ Accept without charge. Others (Specific method: )

2) Receiving Base Yes (If “Yes”, enter a name of a base in the following table.) No

3) Intermediate Receiving Site

Yes (If “Yes”, enter a name of a receiving site in the following table.) No

4) Method for Managing Sale/Purchase Slips for Recovered Material

(Freely enter. If the description cannot fit in the frame, a separate sheet may be

attached. In that case, enter a name of the attached reference in the frame.)

5) Remarks Declare that the recovery/recycling system is improved by a method that does not

violate laws or ordinances such as Wastes Disposal and Public Cleansing Law.

Certificate-15


Form 144-9


Quality Control Certificate

Date of issue: (name of issuing company)Title: Name of issuer: (company seal）

*Issuer: plane manager of finished product or quality control manager (applicant, etc)

We hereby certify that we control the product (name of the product for which

application is filed) in accordance with the quality control items listed in the separate

sheet* （ documents which explain the actual quality control items ） and ship only

those product lots that conform to the quality control standards.

Separate sheet*　following (1) and (2)(1) Quality standards based on JIS, etc. If not available, quality standards stipulated in the industry or

inhouse(2) Test results or certificates showing the conformance to (1) above.

Certificate-16