WeaponStorage Solutions

...when it really matters!

�

Specifically designed to be modular and accommodate most small arms requirements. Used in secure areas such as armories and vaults on a small or large scale. This unique system is available in; Two standard heights 84”(2134mm) and 50” (1270mm); Two Standard widths 34”(864mm) and 40”(1016mm) and Single or Double Sided. In just seconds you can change your system to accommodate different sizes, shapes and quantities. See pages 8 & 9 for components.

Patent Pending

EXPANDABLE WEAPON RACKS

• Two modular widths of 34” (864mm) & 40” (1016mm)

• Single & double sided solutions

• Stores rifles with attached scopes & accessories

• Components interchangeable with all IWSP storage systems

• Easily assembled

• See page 8 & 9 for full line of storage components

�

EXPANDABLE WEAPON RACKS

Can be installed on space saving mobile systems

DOUBLE Sided 50” & 84” heights available as standard

SINGLE Sided 40” W x 84”H unit has a 24 rifle capacity

Increase the height of your unit at any time utilizing 12” or 34” extension posts and panels

For smaller requirements or height restrictions we have designed the same flexibility in our 50”High units.

Design your rack “your way”. Storage components on page 8&9 are

used to create your own solution.

Single sided wall units save a large amount of floor space and give you the flexibility

to re-configure or add-on immediately.

�

STACKABLE WEAPON RACKSOur modular Stackable Weapon Racks are extremely flexible for small arms storage. Securely store your weapons vertically or horizontally utilizing specific mounting components. Racks can be STACKED for space efficiency and can be configured and re-configured at any time.

• Racks are stackable

• Racks can be secured side to side or back to back

• Racks can be secured to wall and/or floor

• Complete with ‘eyelets’ to chain firearms

• Stores rifles with scopes & accessories

• Optional Carry Handle

Patent Pending �8”H (1219mm)42” W (1066mm) x 15” D (381mm)

6�.5”H (1638mm) 42” W (1066mm) x 15” D (381mm)

Security Gates c/w ABLOY key lock and

Padlock Hasp

Optional Rapid Deployment bases available

2 Capacity Mobile Bases available

5

STACKABLE WEAPON RACKS

Carl Gustav Secure Weapons Cabinet

Hinged Locking Bar

Weapons Locker

• Individual Secure Weapon Storage

• Interchangeable storage components

• Stack and/or connect side to side & back to back

• Pad lockable

�8”H (1219mm)14” W (356 mm) x 15” D (381mm)

• 4 Capacity

• Pad Lockable outer Gates with Abloy Keylock

• Pad Lockable Cannon Saddle (2 capacity)

• 64.5”H (1638mm) x 42”W (1066mm)

x 21”D (533mm)

• Compatible with components on page 8 &9

Specially designed to store Carl Gustav M2/M3 Weapons.

Weapons Locker is compatible with Standard 42”W Stackables, ratio of 3:1

Individual or smaller requirements now have a solution with the Weapons Locker. Just as versatile as the standard stackable Weapons Racks, in a smaller foot print, these units can be secured to walls, floors and each other to create the ultimate in space efficiency.

6

• Available in FOUR heights • Stores rifles with attached scopes & accessories• Optional internal Security Gate c/w ABLOY key lock• Internal components can be re-configured easily• Optional internal security gate with ABLOY key lock• All cabinets are 36” Wide (914mm) x 22” Deep (559mm)

WEAPON STORAGE CABINETSDesigned for storage of any size rifle, shotgun, handgun or personal defense weapon stored vertically or horizontally. Each Cabinet is standard with an all steel outer tambour door that is bi-parting. Exterior Padlock Bars, Inner Gates and/or 3-compartment handgun/evidence inserts can be added to maximize the cabinet and its security.

Patent Pending

60”H (1524mm) 6�”H (1625mm) 7�”H (1829mm) 8�”H (2108mm)

7

WEAPON STORAGE CABINETSWeapon Storage Cabinets are available in 60, 64, 72 & 83” heights. Choose from Hand Gun Compartments, M4/C8 Rifle Drawers, Lockable Storage Drawers & Roll-out Work Shelves to design your own Weapons Cabinet. All components are secured inside the Weapons Cabinets prior to shipping but can be changed with little effort if your requirement changes in the future. All cabinets are complete with a bi-parting steel tambour door with key lock.

� Compartment Hand Gun Insert

• 3 point lock mechanism

• 3 Abloy key locks (2 keys per lock)

• Internal rubber matting in each compartment

Rifle Drawer for M�/C8 Rifles (5 capacity)

• 2 Abloy key locks

• Heavy gauge lock down bar

• Rifle stock and barrel rest

Storage Drawer with Lockable lid

• Abloy lockable hinged lid

• 2 HD spring hinges

• 100 lb capacity

83” Weapon Cabinet shown with 1� - (3)Compartment Hand Gun Inserts

and 1 Work Shelf

83” Weapon Cabinet shown with 9 - (3)Compartment Hand Gun Inserts, 1 Locking Storage Drawer, 1 M4 Drawer and 1 Work Shelf

Weapon Cabinets available in Black Santex or Grey Santex

8

COMPONENTS• All components are interchangeable in any of the Weapon Storage Systems that use our universal gun panel • Each component can be relocated any time your weapon inventory changes

Pad Lockable Barrel Saddle

Barrel Saddle 1, 5 & 6 capacity

5.5” deep (139mm) & 7.0” deep (178mm)

Seismic Barrel Saddle Extended Seismic

Barrel Saddle

Stock Saddles

Shelves

Stock Saddles 1, 5, 6, 10 & 12 capacity

Barrel Saddles (Lockable/Seismic)

Horizontal Mounts

Horizontal Mount 2 & 3 capacity

Plain Shelf34” (863mm) & 40” (1016mm) wide

Optional Stock Stop

Optional Back Plate & Dividers

Roll Out Work Shelf5 & 6 space wide

Double Wide Seismic Barrel

Saddle

Double Wide Barrel/Stock

SaddleExtended

Barrel Saddle

Stock Shelves (for upper levels)

Stock Shelves 1, 5 & 6 capacity

Storage Box 3” wide (139mm) & 6” wide (152mm)

Storage Boxes

Barrel Saddles

9

COMPONENTS

Hand Gun Pac1, 6 & 8 capacity

Hand Gun Pacwith clip storage

1, 6 & 8 capacity

Pistol Peg Pac - 1, 6 & 8 capacity Offset Pistol Peg Pac9 & 11 capacity

Hand Gun Pacs

Pistol Peg Pacs

Pistol Profile Peg

1 capacity

Specialty Components

Secure EyeletVelcro Pass

Through Bracket

Radio Cradle 6 capacity

Weapon Inventory Tags Magnetic

Security Screws & Driver

Flak/Utility Vest Holder

3 capacity

Specialty Components

M� base1 Receiver & 2 barrelMk19 base

Mk19 Seismic Barrel Saddle

Lockable Storage/Hand Gun Box

6.25”W (158mm) x 6.875”H (174mm) x 11”D (279mm)

Taser Pacs

Taser Pac6 & 8 capacity

Removable dividers

Cartridge Storagewith rubber matting

Storage Box

10

DDP Mobile Weapon CartOur Mobile Weapon Cart has a capacity of up to 20 Weapons. Complete with 4 heavy-duty rugged casters, steering handles & universal back panels on each side. Customize your cart with stock saddles, barrel saddles or handgun pacs and change the configuration any time you like…. in minutes.

�9.5”H (1257mm) x ��.�5”W (869mm) x �1.75”D (806mm)

Mobile M-16 Case and M-� Case • 6 Capacity • 23”W (584mm) x 42”L (1066mm) x 13”H (330mm) • Individual Interior Compartments• Heavy Duty Transit Wheels• 4 Recessed Carry Handles• Pad-Lockable• Stackable• High Density Polyethylene construction with steel reinforced corners and edges

Mobile Pistol Case• 12 Handgun Capacity • 13.25”W (336mm) x 25.75”L ( 654mm) x 9.75”H (247mm)• Adjustable Dividers• Heavy-Duty Transit Wheels• Collapsible Extension Handle • Pad-Lockable• High Density Polyethylene construction with steel reinforced corners and edges

Patent Pending

WEAPON STORAGE CARTS & CASES

Note: M-4 Case has additional storage compartment

M-16 & M4 cases can be stacked together

Recessed Carry Handles and pad-lockable hasps

New Velcro Pass Through Bracketto secure weapons during transport

11

M2 / .50 CAL MACHINE GUN RACKManufactured of HEAVY Gauge steel and designed to securely store (4) M2 receivers and (8) .50 CAL Barrels. Receivers and barrels can be secured with padlocks. Rack can be secured to the floor, wall, side by side or back to back.

5�”H (1371mm) x 55”W (1397mm) x 1�”D (330mm)

All four M2 guns are locked and unlocked simultaneously with an all steel cylindrical locking bar that slides through the lock paddles. Once the locking bar has been removed there is easy access to the guns as the locking bar is stored on two hooks in the inner top portion of the rack.

The barrels are stored vertically in two groups of 4 and padlocked through a steel support plate and steel hinged plate. The lower portion of each barrel is cradled in its own heavy steel support base.

Each M2 Machine Gun is secured with a lock paddle that slides through the “action slot” in the M2. In turn, the cylindrical locking bar then slides through the end of each lock paddle and secured with a padlock. (padlock not included)

Optional � capacity Barrel Support attaches to the top of the M2 rack. Adjustable in width and easily installed.

P.O. Box 565, Woodbury, NJ 08096-7565

Phone: 856-845-6767 • Fax: 856-384-1145Toll Free: 1-800-367-4216e-mail: wcpinc@bellatlantic.netwebsite: www.wcp-usa.com

Distributed Nationally by: